summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/include/mach
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2/include/mach')
-rw-r--r--arch/arm/mach-omap2/include/mach/am35xx.h26
-rw-r--r--arch/arm/mach-omap2/include/mach/board-sdp.h21
-rw-r--r--arch/arm/mach-omap2/include/mach/debug-macro.S130
-rw-r--r--arch/arm/mach-omap2/include/mach/entry-macro.S128
4 files changed, 256 insertions, 49 deletions
diff --git a/arch/arm/mach-omap2/include/mach/am35xx.h b/arch/arm/mach-omap2/include/mach/am35xx.h
new file mode 100644
index 00000000000..a705f946fc4
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/am35xx.h
@@ -0,0 +1,26 @@
+/*:
+ * Address mappings and base address for AM35XX specific interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Sriramakrishnan <srk@ti.com>
+ * Vaibhav Hiremath <hvaibhav@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_AM35XX_H
+#define __ASM_ARCH_AM35XX_H
+
+/*
+ * Base addresses
+ * Note: OMAP3430 IVA2 memory space is being used for AM35xx IPSS modules
+ */
+#define AM35XX_IPSS_EMAC_BASE 0x5C000000
+#define AM35XX_IPSS_USBOTGSS_BASE 0x5C040000
+#define AM35XX_IPSS_HECC_BASE 0x5C050000
+#define AM35XX_IPSS_VPFE_BASE 0x5C060000
+
+#endif /* __ASM_ARCH_AM35XX_H */
diff --git a/arch/arm/mach-omap2/include/mach/board-sdp.h b/arch/arm/mach-omap2/include/mach/board-sdp.h
new file mode 100644
index 00000000000..465169c0908
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-sdp.h
@@ -0,0 +1,21 @@
+/*
+ * board-sdp.h
+ *
+ * Information structures for SDP-specific board config data
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct flash_partitions {
+ struct mtd_partition *parts;
+ int nr_parts;
+};
+
+extern void sdp_flash_init(struct flash_partitions []);
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 86979d7bd87..4a63a2ea484 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -11,32 +11,107 @@
*
*/
+#include <linux/serial_reg.h>
+
+#include <plat/serial.h>
+
+#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
+
+ .pushsection .data
+omap_uart_phys: .word 0
+omap_uart_virt: .word 0
+omap_uart_lsr: .word 0
+ .popsection
+
+ /*
+ * Note that this code won't work if the bootloader passes
+ * a wrong machine ID number in r1. To debug, just hardcode
+ * the desired UART phys and virt addresses temporarily into
+ * the omap_uart_phys and omap_uart_virt above.
+ */
.macro addruart, rx, tmp
+
+ /* Use omap_uart_phys/virt if already configured */
+10: mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =omap_uart_phys @ physical base address
+ ldrne \rx, =omap_uart_virt @ virtual base address
+ ldr \rx, [\rx, #0]
+ cmp \rx, #0 @ is port configured?
+ bne 99f @ already configured
+
+ /* Check UART1 scratchpad register for uart to use */
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP2
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00004000 @ UART 3
-#endif
-
-#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
- moveq \rx, #0x48000000 @ physical base address
- movne \rx, #0xfa000000 @ virtual base
- orr \rx, \rx, #0x0006a000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART2
- add \rx, \rx, #0x00002000 @ UART 2
-#endif
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
- add \rx, \rx, #0x00fb0000 @ UART 3
- add \rx, \rx, #0x00006000
-#endif
-#endif
+ orr \rx, \rx, #0x0006a000 @ uart1 on omap2/3/4
+ ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] @ scratchpad
+
+ /* Select the UART to use based on the UART1 scratchpad value */
+ cmp \rx, #0 @ no port configured?
+ beq 21f @ if none, try to use UART1
+ cmp \rx, #OMAP2UART1 @ OMAP2/3/4UART1
+ beq 21f @ configure OMAP2/3/4UART1
+ cmp \rx, #OMAP2UART2 @ OMAP2/3/4UART2
+ beq 22f @ configure OMAP2/3/4UART2
+ cmp \rx, #OMAP2UART3 @ only on 24xx
+ beq 23f @ configure OMAP2UART3
+ cmp \rx, #OMAP3UART3 @ only on 34xx
+ beq 33f @ configure OMAP3UART3
+ cmp \rx, #OMAP4UART3 @ only on 44xx
+ beq 43f @ configure OMAP4UART3
+ cmp \rx, #OMAP3UART4 @ only on 36xx
+ beq 34f @ configure OMAP3UART4
+ cmp \rx, #OMAP4UART4 @ only on 44xx
+ beq 44f @ configure OMAP4UART4
+ cmp \rx, #ZOOM_UART @ only on zoom2/3
+ beq 95f @ configure ZOOM_UART
+
+ /* Configure the UART offset from the phys/virt base */
+21: mov \rx, #UART_OFFSET(OMAP2_UART1_BASE) @ omap2/3/4
+ b 98f
+22: mov \rx, #UART_OFFSET(OMAP2_UART2_BASE) @ omap2/3/4
+ b 98f
+23: mov \rx, #UART_OFFSET(OMAP2_UART3_BASE)
+ b 98f
+33: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00006000 @ OMAP3_UART3_BASE
+ b 98f
+34: mov \rx, #UART_OFFSET(OMAP3_UART1_BASE)
+ add \rx, \rx, #0x00fb0000
+ add \rx, \rx, #0x00028000 @ OMAP3_UART4_BASE
+ b 98f
+43: mov \rx, #UART_OFFSET(OMAP4_UART3_BASE)
+ b 98f
+44: mov \rx, #UART_OFFSET(OMAP4_UART4_BASE)
+ b 98f
+95: mov \rx, #ZOOM_UART_BASE
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ mov \rx, #ZOOM_UART_VIRT
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ mov \rx, #(UART_LSR << ZOOM_PORT_SHIFT)
+ ldr \tmp, =omap_uart_lsr
+ str \rx, [\tmp, #0]
+ b 10b
+
+ /* Store both phys and virt address for the uart */
+98: add \rx, \rx, #0x48000000 @ phys base
+ ldr \tmp, =omap_uart_phys
+ str \rx, [\tmp, #0]
+ sub \rx, \rx, #0x48000000 @ phys base
+ add \rx, \rx, #0xfa000000 @ virt base
+ ldr \tmp, =omap_uart_virt
+ str \rx, [\tmp, #0]
+ mov \rx, #(UART_LSR << OMAP_PORT_SHIFT)
+ ldr \tmp, =omap_uart_lsr
+ str \rx, [\tmp, #0]
+
+ b 10b
+99:
.endm
.macro senduart,rd,rx
@@ -44,15 +119,12 @@
.endm
.macro busyuart,rd,rx
-1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends
- and \rd, \rd, #0x60
- teq \rd, #0x60
- beq 1002f
- ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only
- and \rd, \rd, #0x60
- teq \rd, #0x60
+1001: ldr \rd, =omap_uart_lsr
+ ldr \rd, [\rd, #0]
+ ldrb \rd, [\rx, \rd]
+ and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
+ teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
-1002:
.endm
.macro waituart,rd,rx
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index c7f1720bf28..ff25c7e4e60 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -17,46 +17,134 @@
#include <plat/omap24xx.h>
#include <plat/omap34xx.h>
-
-/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
-#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#endif
-#if defined(CONFIG_ARCH_OMAP4)
#include <plat/omap44xx.h>
-#endif
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
-#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
+
+#include <plat/multi.h>
+
+#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
+#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
+ .macro arch_ret_to_user, tmp1, tmp2
.endm
- .macro arch_ret_to_user, tmp1, tmp2
+/*
+ * Unoptimized irq functions for multi-omap2, 3 and 4
+ */
+
+#ifdef MULTI_OMAP2
+ .pushsection .data
+omap_irq_base: .word 0
+ .popsection
+
+ /* Configure the interrupt base on the first interrupt */
+ .macro get_irqnr_preamble, base, tmp
+9:
+ ldr \base, =omap_irq_base @ irq base address
+ ldr \base, [\base, #0] @ irq base value
+ cmp \base, #0 @ already configured?
+ bne 9997f @ nothing to do
+
+ mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
+ and \tmp, \tmp, #0x000f0000 @ only check architecture
+ cmp \tmp, #0x00060000 @ is v6?
+ beq 2400f @ found v6 so it's omap24xx
+ mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
+ and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9
+ cmp \tmp, #0x00000080 @ cortex A-8?
+ beq 3400f @ found A-8 so it's omap34xx
+ cmp \tmp, #0x00000090 @ cortex A-9?
+ beq 4400f @ found A-9 so it's omap44xx
+2400: ldr \base, =OMAP2_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+3400: ldr \base, =OMAP3_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+4400: ldr \base, =OMAP4_IRQ_BASE
+ ldr \tmp, =omap_irq_base
+ str \base, [\tmp, #0]
+ b 9b
+9997:
.endm
-#ifndef CONFIG_ARCH_OMAP4
+ /* Check the pending interrupts. Note that base already set */
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP2_VA_IC_BASE
+ tst \base, #0x100 @ gic address?
+ bne 4401f @ found gic
+
+ /* Handle omap2 and omap3 */
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
cmp \irqnr, #0x0
- bne 2222f
+ bne 9998f
ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
cmp \irqnr, #0x0
- bne 2222f
+ bne 9998f
ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
cmp \irqnr, #0x0
-2222:
+9998:
ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+ b 9999f
+ /* Handle omap4 */
+4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
+ ldr \tmp, =1021
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+9999:
.endm
+
+
+#else /* MULTI_OMAP2 */
+
+
+/*
+ * Optimized irq functions for omap2, 3 and 4
+ */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+ .macro get_irqnr_preamble, base, tmp
+#ifdef CONFIG_ARCH_OMAP2
+ ldr \base, =OMAP2_IRQ_BASE
#else
-#define OMAP44XX_VA_GIC_CPU_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+ ldr \base, =OMAP3_IRQ_BASE
+#endif
+ .endm
+
+ /* Check the pending interrupts. Note that base already set */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
+ cmp \irqnr, #0x0
+ bne 9999f
+ ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
+ cmp \irqnr, #0x0
+ bne 9999f
+ ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
+ cmp \irqnr, #0x0
+9999:
+ ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
+ and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
+
+ .endm
+#endif
+
+
+#ifdef CONFIG_ARCH_OMAP4
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =OMAP4_IRQ_BASE
+ .endm
/*
* The interrupt numbering scheme is defined in the
@@ -78,7 +166,6 @@
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
@@ -119,6 +206,7 @@
cmp \tmp, #0
.endm
#endif
+#endif /* MULTI_OMAP2 */
.macro irq_prio_table
.endm