summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r--arch/arm/mach-omap2/board-cm-t3517.c29
-rw-r--r--arch/arm/mach-omap2/board-devkit8000.c30
-rw-r--r--arch/arm/mach-omap2/board-omap4panda.c2
-rw-r--r--arch/arm/mach-omap2/board-rm680.c3
-rw-r--r--arch/arm/mach-omap2/clock44xx_data.c1
-rw-r--r--arch/arm/mach-omap2/clockdomain.c30
-rw-r--r--arch/arm/mach-omap2/clockdomains44xx_data.c2
-rw-r--r--arch/arm/mach-omap2/dma.c2
-rw-r--r--arch/arm/mach-omap2/include/mach/entry-macro.S14
-rw-r--r--arch/arm/mach-omap2/io.c6
-rw-r--r--arch/arm/mach-omap2/mux.c3
-rw-r--r--arch/arm/mach-omap2/pm24xx.c4
-rw-r--r--arch/arm/mach-omap2/pm34xx.c11
-rw-r--r--arch/arm/mach-omap2/powerdomain2xxx_3xxx.c1
-rw-r--r--arch/arm/mach-omap2/serial.c4
-rw-r--r--arch/arm/mach-omap2/smartreflex.c11
-rw-r--r--arch/arm/mach-omap2/timer-gp.c10
-rw-r--r--arch/arm/mach-omap2/voltage.c1
18 files changed, 96 insertions, 68 deletions
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 5b0c77732df..8f9a64d650e 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {}
#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
#define RTC_IO_GPIO (153)
#define RTC_WR_GPIO (154)
-#define RTC_RD_GPIO (160)
+#define RTC_RD_GPIO (53)
#define RTC_CS_GPIO (163)
+#define RTC_CS_EN_GPIO (160)
struct v3020_platform_data cm_t3517_v3020_pdata = {
.use_gpio = 1,
@@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = {
static void __init cm_t3517_init_rtc(void)
{
+ int err;
+
+ err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en");
+ if (err) {
+ pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err);
+ return;
+ }
+
+ gpio_direction_output(RTC_CS_EN_GPIO, 1);
+
platform_device_register(&cm_t3517_rtc_device);
}
#else
@@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = {
},
{
.name = "linux",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */
.size = 32 * NAND_BLOCK_SIZE,
},
{
.name = "rootfs",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */
.size = MTDPART_SIZ_FULL,
},
};
@@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void)
static struct omap_board_mux board_mux[] __initdata = {
/* GPIO186 - Green LED */
OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
- /* RTC GPIOs: IO, WR#, RD#, CS# */
+
+ /* RTC GPIOs: */
+ /* IO - GPIO153 */
OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* WR# - GPIO154 */
OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
- OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* RD# - GPIO53 */
+ OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* CS# - GPIO163 */
OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+ /* CS EN - GPIO160 */
+ OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
/* HSUSB1 RESET */
OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* HSUSB2 RESET */
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 00bb1fc5e01..9a2a31e011c 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -115,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = {
static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
{
- twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
- twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
-
if (gpio_is_valid(dssdev->reset_gpio))
gpio_set_value_cansleep(dssdev->reset_gpio, 1);
return 0;
@@ -247,6 +244,8 @@ static struct gpio_led gpio_leds[];
static int devkit8000_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
+ int ret;
+
omap_mux_init_gpio(29, OMAP_PIN_INPUT);
/* gpio + 0 is "mmc0_cd" (input/IRQ) */
mmc[0].gpio_cd = gpio + 0;
@@ -255,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
- /* gpio + 1 is "LCD_PWREN" (out, active high) */
- devkit8000_lcd_device.reset_gpio = gpio + 1;
- gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN");
- /* Disable until needed */
- gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0);
+ /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */
+ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0;
+ ret = gpio_request_one(devkit8000_lcd_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN");
+ if (ret < 0) {
+ devkit8000_lcd_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n");
+ }
/* gpio + 7 is "DVI_PD" (out, active low) */
devkit8000_dvi_device.reset_gpio = gpio + 7;
- gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown");
- /* Disable until needed */
- gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0);
+ ret = gpio_request_one(devkit8000_dvi_device.reset_gpio,
+ GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown");
+ if (ret < 0) {
+ devkit8000_dvi_device.reset_gpio = -EINVAL;
+ printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n");
+ }
return 0;
}
@@ -275,8 +280,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.use_leds = true,
- .pullups = BIT(1),
- .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
| BIT(15) | BIT(16) | BIT(17),
.setup = devkit8000_twl_gpio_setup,
};
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index e001a048dc0..e944025d5ef 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -409,8 +409,6 @@ static void __init omap4_panda_init(void)
platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices));
omap_serial_init();
omap4_twl6030_hsmmc_init(mmc);
- /* OMAP4 Panda uses internal transceiver so register nop transceiver */
- usb_nop_xceiv_register();
omap4_ehci_init();
usb_musb_init(&musb_board_data);
}
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index cb77be7ac44..39a71bb8a30 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
static struct regulator_init_data rm680_vemmc = {
.constraints = {
.name = "rm680_vemmc",
- .min_uV = 2900000,
- .max_uV = 2900000,
- .apply_uV = 1,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_STATUS
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index e8cb32fd7f1..de9ec8ddd2a 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -34,7 +34,6 @@
#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
#include "prm44xx.h"
-#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "control.h"
#include "scrm44xx.h"
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index e20b98636ab..58e42f76603 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm1 || !clkdm2)
return -EINVAL;
@@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
{
struct clkdm_dep *cd;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm1 || !clkdm2)
return -EINVAL;
@@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
if (!clkdm1 || !clkdm2)
return -EINVAL;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s/%s: %s: not yet implemented\n",
+ clkdm1->name, clkdm2->name, __func__);
+ return -EINVAL;
+ }
+
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
if (IS_ERR(cd)) {
pr_debug("clockdomain: hardware cannot set/clear wake up of "
@@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
struct clkdm_dep *cd;
u32 mask = 0;
+ if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) {
+ pr_err("clockdomain: %s: %s: not yet implemented\n",
+ clkdm->name, __func__);
+ return -EINVAL;
+ }
+
if (!clkdm)
return -EINVAL;
@@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
* dependency code and data for OMAP4.
*/
if (cpu_is_omap44xx()) {
- WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
- "support is not yet implemented\n");
+ pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
} else {
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_add_autodeps(clkdm);
@@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
* dependency code and data for OMAP4.
*/
if (cpu_is_omap44xx()) {
- WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
- "support is not yet implemented\n");
+ pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name);
} else {
if (atomic_read(&clkdm->usecount) > 0)
_clkdm_del_autodeps(clkdm);
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 51920fc7fc5..10622c914ab 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -30,8 +30,6 @@
#include "cm1_44xx.h"
#include "cm2_44xx.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
#include "cm-regbits-44xx.h"
#include "prm44xx.h"
#include "prcm44xx.h"
diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c
index d2f15f5cfd3..34922b2d2e3 100644
--- a/arch/arm/mach-omap2/dma.c
+++ b/arch/arm/mach-omap2/dma.c
@@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
if (IS_ERR(od)) {
pr_err("%s: Cant build omap_device for %s:%s.\n",
__func__, name, oh->name);
- return IS_ERR(od);
+ return PTR_ERR(od);
}
mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0);
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index befa321c4c1..81985a665cb 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -38,20 +38,6 @@
*/
#ifdef MULTI_OMAP2
-
-/*
- * We use __glue to avoid errors with multiple definitions of
- * .globl omap_irq_base as it's included from entry-armv.S but not
- * from entry-common.S.
- */
-#ifdef __glue
- .pushsection .data
- .globl omap_irq_base
-omap_irq_base:
- .word 0
- .popsection
-#endif
-
/*
* Configure the interrupt base on the first interrupt.
* See also omap_irq_base_init for setting omap_irq_base.
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index e66687b0b9d..c2032041d26 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
+void __iomem *omap_irq_base;
+
/*
* Initialize asm_irq_base for entry-macro.S
*/
static inline void omap_irq_base_init(void)
{
- extern void __iomem *omap_irq_base;
-
-#ifdef MULTI_OMAP2
if (cpu_is_omap24xx())
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE);
else if (cpu_is_omap34xx())
@@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void)
omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE);
else
pr_err("Could not initialize omap_irq_base\n");
-#endif
}
void __init omap2_init_common_infrastructure(void)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index df8d2f2872c..98148b6c36e 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
struct omap_mux *mux = NULL;
struct omap_mux_entry *e;
const char *mode_name;
- int found = 0, found_mode, mode0_len = 0;
+ int found = 0, found_mode = 0, mode0_len = 0;
struct list_head *muxmodes = &partition->muxmodes;
mode_name = strchr(muxname, '.');
@@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags,
if (!partition->base) {
pr_err("%s: Could not ioremap mux partition at 0x%08x\n",
__func__, partition->phys);
+ kfree(partition);
return -ENODEV;
}
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 9e5dc8ed51e..97feb3ab6a6 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void)
/* Block console output in case it is on one of the OMAP UARTs */
if (!is_suspending())
- if (try_acquire_console_sem())
+ if (!console_trylock())
goto no_sleep;
omap_uart_prepare_idle(0);
@@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void)
omap_uart_resume_idle(0);
if (!is_suspending())
- release_console_sem();
+ console_unlock();
no_sleep:
if (omap2_pm_debug) {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 8cbbeade4b8..2f864e4b085 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -168,9 +168,10 @@ static void omap3_core_restore_context(void)
* once during boot sequence, but this works as we are not using secure
* services.
*/
-static void omap3_save_secure_ram_context(u32 target_mpu_state)
+static void omap3_save_secure_ram_context(void)
{
u32 ret;
+ int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
/*
@@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state)
pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
ret = _omap_save_secure_sram((u32 *)
__pa(omap3_secure_ram_storage));
- pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+ pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state);
/* Following is for error tracking, it should not happen */
if (ret) {
printk(KERN_ERR "save_secure_sram() returns %08x\n",
@@ -398,7 +399,7 @@ void omap_sram_idle(void)
if (!is_suspending())
if (per_next_state < PWRDM_POWER_ON ||
core_next_state < PWRDM_POWER_ON)
- if (try_acquire_console_sem())
+ if (!console_trylock())
goto console_still_active;
/* PER */
@@ -481,7 +482,7 @@ void omap_sram_idle(void)
}
if (!is_suspending())
- release_console_sem();
+ console_unlock();
console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
@@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void)
local_fiq_disable();
omap_dma_global_context_save();
- omap3_save_secure_ram_context(PWRDM_POWER_ON);
+ omap3_save_secure_ram_context();
omap_dma_global_context_restore();
local_irq_enable();
diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
index d5233890370..cf600e22bf8 100644
--- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
+++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c
@@ -19,7 +19,6 @@
#include <plat/prcm.h>
#include "powerdomain.h"
-#include "prm-regbits-34xx.h"
#include "prm.h"
#include "prm-regbits-24xx.h"
#include "prm-regbits-34xx.h"
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 302da7403a1..32e91a9c8b6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
oh->dev_attr = uart;
- acquire_console_sem(); /* in case the earlycon is on the UART */
+ console_lock(); /* in case the earlycon is on the UART */
/*
* Because of early UART probing, UART did not get idled
@@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata)
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
- release_console_sem();
+ console_unlock();
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf3fae..c37e823266d 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -780,8 +780,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -795,8 +794,7 @@ static int omap_sr_autocomp_store(void *data, u64 val)
struct omap_sr *sr_info = (struct omap_sr *) data;
if (!sr_info) {
- pr_warning("%s: omap_sr struct for sr_%s not found\n",
- __func__, sr_info->voltdm->name);
+ pr_warning("%s: omap_sr struct not found\n", __func__);
return -EINVAL;
}
@@ -834,7 +832,8 @@ static int __init omap_sr_probe(struct platform_device *pdev)
if (!pdata) {
dev_err(&pdev->dev, "%s: platform data missing\n", __func__);
- return -EINVAL;
+ ret = -EINVAL;
+ goto err_free_devinfo;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -966,7 +965,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
}
sr_info = _sr_lookup(pdata->voltdm);
- if (!sr_info) {
+ if (IS_ERR(sr_info)) {
dev_warn(&pdev->dev, "%s: omap_sr struct not found\n",
__func__);
return -EINVAL;
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 4e48e786bec..7b7c2683ae7 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -42,6 +42,8 @@
#include "timer-gp.h"
+#include <plat/common.h>
+
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
@@ -176,10 +178,14 @@ static void __init omap2_gp_clockevent_init(void)
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
* instead, just leave default clocksource which uses the 32k
- * sync counter. See clocksource setup in see plat-omap/common.c.
+ * sync counter. See clocksource setup in plat-omap/counter_32k.c
*/
-static inline void __init omap2_gp_clocksource_init(void) {}
+static void __init omap2_gp_clocksource_init(void)
+{
+ omap_init_clocksource_32k();
+}
+
#else
/*
* clocksource
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index ed6079c94c5..12be525b8df 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd)
strcat(name, vdd->voltdm.name);
vdd->debug_dir = debugfs_create_dir(name, voltage_dir);
+ kfree(name);
if (IS_ERR(vdd->debug_dir)) {
pr_warning("%s: Unable to create debugfs directory for"
" vdd_%s\n", __func__, vdd->voltdm.name);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-18 21:14:53 +0000