summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-realview
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-realview')
-rw-r--r--arch/arm/mach-realview/Kconfig2
-rw-r--r--arch/arm/mach-realview/core.c7
-rw-r--r--arch/arm/mach-realview/include/mach/gpio.h6
-rw-r--r--arch/arm/mach-realview/include/mach/hardware.h4
-rw-r--r--arch/arm/mach-realview/platsmp.c18
-rw-r--r--arch/arm/mach-realview/realview_eb.c22
-rw-r--r--arch/arm/mach-realview/realview_pb1176.c22
-rw-r--r--arch/arm/mach-realview/realview_pb11mp.c22
-rw-r--r--arch/arm/mach-realview/realview_pba8.c22
-rw-r--r--arch/arm/mach-realview/realview_pbx.c22
10 files changed, 119 insertions, 28 deletions
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index d4cfa214538..dfc9b0bc6eb 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -75,7 +75,7 @@ config MACH_REALVIEW_PBX
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
- depends on !MACH_REALVIEW_PB1176
+ depends on MMU && !MACH_REALVIEW_PB1176
default y
help
RealView boards other than PB1176 have the RAM available at
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index facbd49eec6..dc3519c50ab 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -221,6 +221,9 @@ arch_initcall(realview_i2c_init);
#define REALVIEW_SYSMCI (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_MCI_OFFSET)
+/*
+ * This is only used if GPIOLIB support is disabled
+ */
static unsigned int realview_mmc_status(struct device *dev)
{
struct amba_device *adev = container_of(dev, struct amba_device, dev);
@@ -237,11 +240,15 @@ static unsigned int realview_mmc_status(struct device *dev)
struct mmc_platform_data realview_mmc0_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 17,
+ .gpio_cd = 16,
};
struct mmc_platform_data realview_mmc1_plat_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.status = realview_mmc_status,
+ .gpio_wp = 19,
+ .gpio_cd = 18,
};
/*
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
new file mode 100644
index 00000000000..94ff27678a4
--- /dev/null
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -0,0 +1,6 @@
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+#define gpio_to_irq __gpio_to_irq
diff --git a/arch/arm/mach-realview/include/mach/hardware.h b/arch/arm/mach-realview/include/mach/hardware.h
index b42c14f89ac..8a638d15797 100644
--- a/arch/arm/mach-realview/include/mach/hardware.h
+++ b/arch/arm/mach-realview/include/mach/hardware.h
@@ -25,6 +25,7 @@
#include <asm/sizes.h>
/* macro to get at IO space when running virtually */
+#ifdef CONFIG_MMU
/*
* Statically mapped addresses:
*
@@ -33,6 +34,9 @@
* 1fxx xxxx -> fexx xxxx
*/
#define IO_ADDRESS(x) (((x) & 0x03ffffff) + 0xfb000000)
+#else
+#define IO_ADDRESS(x) (x)
+#endif
#define __io_address(n) __io(IO_ADDRESS(n))
#endif
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ac0e83f1cc3..a88458b4799 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -20,6 +20,7 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/localtimer.h>
+#include <asm/unified.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
@@ -137,26 +138,19 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
static void __init poke_milo(void)
{
- extern void secondary_startup(void);
-
/* nobody is to be released from the pen yet */
pen_release = -1;
/*
- * write the address of secondary startup into the system-wide
- * flags register, then clear the bottom two bits, which is what
- * BootMonitor is waiting for
+ * Write the address of secondary startup into the system-wide flags
+ * register. The BootMonitor waits for this register to become
+ * non-zero.
*/
-#if 1
#define REALVIEW_SYS_FLAGSS_OFFSET 0x30
- __raw_writel(virt_to_phys(realview_secondary_startup),
- __io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSS_OFFSET);
#define REALVIEW_SYS_FLAGSC_OFFSET 0x34
- __raw_writel(3,
+ __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)),
__io_address(REALVIEW_SYS_BASE) +
- REALVIEW_SYS_FLAGSC_OFFSET);
-#endif
+ REALVIEW_SYS_FLAGSS_OFFSET);
mb();
}
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8dfa44e08a9..abd13b44867 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -113,6 +114,21 @@ static void __init realview_eb_map_io(void)
iotable_init(realview_eb11mp_io_desc, ARRAY_SIZE(realview_eb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView EB AMBA devices
*/
@@ -189,9 +205,9 @@ AMBA_DEVICE(clcd, "dev:20", EB_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", EB_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", EB_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 25efe71a67c..17fbb0e889b 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -107,6 +108,21 @@ static void __init realview_pb1176_map_io(void)
iotable_init(realview_pb1176_io_desc, ARRAY_SIZE(realview_pb1176_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB1176 AMBA devices
*/
@@ -164,9 +180,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB1176_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PB1176_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB1176_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB1176_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB1176_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index dc4b1694390..fdd042b85f4 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <mach/hardware.h>
@@ -108,6 +109,21 @@ static void __init realview_pb11mp_map_io(void)
iotable_init(realview_pb11mp_io_desc, ARRAY_SIZE(realview_pb11mp_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PB11MPCore AMBA devices
*/
@@ -166,9 +182,9 @@ AMBA_DEVICE(uart3, "fpga:09", PB11MP_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PB11MP_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PB11MP_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PB11MP_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PB11MP_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index d6ac1eb8657..70bba9900d9 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -23,6 +23,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -98,6 +99,21 @@ static void __init realview_pba8_map_io(void)
iotable_init(realview_pba8_io_desc, ARRAY_SIZE(realview_pba8_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBA8Core AMBA devices
*/
@@ -156,9 +172,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBA8_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PBA8_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBA8_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBA8_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBA8_UART0, NULL);
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ede2a57240a..ce6c5d25fbe 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
+#include <linux/amba/pl061.h>
#include <linux/io.h>
#include <asm/irq.h>
@@ -118,6 +119,21 @@ static void __init realview_pbx_map_io(void)
iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
}
+static struct pl061_platform_data gpio0_plat_data = {
+ .gpio_base = 0,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio1_plat_data = {
+ .gpio_base = 8,
+ .irq_base = -1,
+};
+
+static struct pl061_platform_data gpio2_plat_data = {
+ .gpio_base = 16,
+ .irq_base = -1,
+};
+
/*
* RealView PBXCore AMBA devices
*/
@@ -176,9 +192,9 @@ AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-24 23:31:59 +0000