summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-s3c2440
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-s3c2440')
-rw-r--r--arch/arm/mach-s3c2440/Kconfig14
-rw-r--r--arch/arm/mach-s3c2440/Makefile1
-rw-r--r--arch/arm/mach-s3c2440/mach-mini2440.c23
-rw-r--r--arch/arm/mach-s3c2440/mach-nexcoder.c9
-rw-r--r--arch/arm/mach-s3c2440/mach-osiris.c5
-rw-r--r--arch/arm/mach-s3c2440/mach-rx1950.c582
-rw-r--r--arch/arm/mach-s3c2440/mach-rx3715.c2
-rw-r--r--arch/arm/mach-s3c2440/mach-smdk2440.c2
-rw-r--r--arch/arm/mach-s3c2440/s3c2440.c8
9 files changed, 627 insertions, 19 deletions
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 7f465265cf0..cd8e7de388f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -6,6 +6,7 @@ config CPU_S3C2440
bool
depends on ARCH_S3C2410
select CPU_ARM920T
+ select S3C_GPIO_PULL_UP
select S3C2410_CLOCK
select S3C2410_PM if PM
select S3C2410_GPIO
@@ -187,4 +188,17 @@ config MACH_MINI2440
Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
available via various sources. It can come with a 3.5" or 7" touch LCD.
+config MACH_RX1950
+ bool "HP iPAQ rx1950"
+ select CPU_S3C2442
+ select S3C24XX_DCLK
+ select PM_H1940 if PM
+ select I2C
+ select S3C2410_PWM
+ select S3C_DEV_NAND
+ select S3C2410_IOTIMING if S3C2440_CPUFREQ
+ select S3C2440_XTAL_16934400
+ help
+ Say Y here if you're using HP iPAQ rx1950
+
endmenu
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index c85ba32d895..d5440fa34b0 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
+obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
# extra machine support
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 571b17683d9..a76bcda210a 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -53,6 +53,7 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -102,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd)
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ gpio_set_value(S3C2410_GPC(5), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+ gpio_set_value(S3C2410_GPC(5), 0);
break;
case S3C2410_UDC_P_RESET :
break;
@@ -632,25 +633,25 @@ static void __init mini2440_init(void)
mini2440_parse_features(&features, mini2440_features_str);
/* turn LCD on */
- s3c2410_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
+ s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND);
/* Turn the backlight early on */
- s3c2410_gpio_setpin(S3C2410_GPG(4), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT);
+ WARN_ON(gpio_request(S3C2410_GPG(4), "backlight"));
+ gpio_direction_output(S3C2410_GPG(4), 1);
/* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */
- s3c2410_gpio_pullup(S3C2410_GPB(1), 0);
+ s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP);
s3c2410_gpio_setpin(S3C2410_GPB(1), 0);
- s3c2410_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT);
/* Make sure the D+ pullup pin is output */
- s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
+ WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup"));
+ gpio_direction_output(S3C2410_GPC(5), 0);
/* mark the key as input, without pullups (there is one on the board) */
for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) {
- s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0);
- s3c2410_gpio_cfgpin(mini2440_buttons[i].gpio,
- S3C2410_GPIO_INPUT);
+ s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT);
}
if (features.lcd_index != -1) {
int li;
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 342041593f2..3ff62de45fd 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -40,6 +40,7 @@
#include <plat/regs-serial.h>
#include <plat/iic.h>
+#include <plat/gpio-cfg.h>
#include <plat/s3c2410.h>
#include <plat/s3c244x.h>
#include <plat/clock.h>
@@ -122,15 +123,15 @@ static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
+ s3c_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
+ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index f35371db33f..319458da71a 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -49,6 +49,7 @@
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
+#include <plat/gpio-cfg.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -298,7 +299,7 @@ static int osiris_pm_suspend(struct sys_device *sd, pm_message_t state)
/* ensure that an nRESET is not generated on resume. */
s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
@@ -310,7 +311,7 @@ static int osiris_pm_resume(struct sys_device *sd)
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
- s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
+ s3c_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
new file mode 100644
index 00000000000..8603b577a24
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -0,0 +1,582 @@
+/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
+ *
+ * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
+ * Copyright (c) 2007-2010 Vasily Khoruzhick
+ *
+ * based on smdk2440 written by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/sysdev.h>
+#include <linux/pwm_backlight.h>
+#include <linux/pwm.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/mmc/host.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/h1940.h>
+#include <mach/fb.h>
+
+#include <plat/clock.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-iic.h>
+#include <plat/mci.h>
+#include <plat/udc.h>
+#include <plat/nand.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+#include <plat/ts.h>
+
+#define LCD_PWM_PERIOD 192960
+#define LCD_PWM_DUTY 127353
+
+static struct map_desc rx1950_iodesc[] __initdata = {
+};
+
+static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
+ [0] = {
+ .name = "fclk",
+ .divisor = 0x0a,
+ .min_baud = 0,
+ .max_baud = 0,
+ },
+};
+
+static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+ /* IR port */
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x43,
+ .ufcon = 0xf1,
+ .clocks = rx1950_serial_clocks,
+ .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ },
+};
+
+static struct s3c2410fb_display rx1950_display = {
+ .type = S3C2410_LCDCON1_TFT,
+ .width = 240,
+ .height = 320,
+ .xres = 240,
+ .yres = 320,
+ .bpp = 16,
+
+ .pixclock = 260000,
+ .left_margin = 10,
+ .right_margin = 20,
+ .hsync_len = 10,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .vsync_len = 2,
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVCLK |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_HWSWP |
+ (0x02 << 13) |
+ (0x02 << 15),
+
+};
+
+static struct s3c2410fb_mach_info rx1950_lcd_cfg = {
+ .displays = &rx1950_display,
+ .num_displays = 1,
+ .default_display = 0,
+
+ .lpcsel = 0x02,
+ .gpccon = 0xaa9556a9,
+ .gpccon_mask = 0xffc003fc,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+
+ .gpdcon = 0xaa90aaa1,
+ .gpdcon_mask = 0xffc0fff0,
+ .gpdup = 0x0000fcfd,
+ .gpdup_mask = 0xffffffff,
+
+};
+
+static struct pwm_device *lcd_pwm;
+
+void rx1950_lcd_power(int enable)
+{
+ int i;
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+
+ /* GPC11-GPC15->OUTPUT */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 1);
+
+ /* Wait a bit here... */
+ mdelay(100);
+
+ /* GPD2-GPD7->OUTPUT */
+ /* GPD11-GPD15->OUTPUT */
+ /* GPD2-GPD7->1, GPD11-GPD15->1 */
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 1);
+
+ /* Wait a bit here...*/
+ mdelay(100);
+
+ /* GPB0->OUTPUT, GPB0->0 */
+ gpio_direction_output(S3C2410_GPB(0), 0);
+
+ /* GPC1-GPC4->OUTPUT, GPC1-4->0 */
+ for (i = 1; i < 5; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPC15-GPC11->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPC(i), 0);
+
+ /* GPD15-GPD11->0, GPD2->GPD7->0 */
+ for (i = 11; i < 16; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ for (i = 2; i < 8; i++)
+ gpio_direction_output(S3C2410_GPD(i), 0);
+
+ /* GPC6->0, GPC7->0, GPC5->0 */
+ gpio_direction_output(S3C2410_GPC(6), 0);
+ gpio_direction_output(S3C2410_GPC(7), 0);
+ gpio_direction_output(S3C2410_GPC(5), 0);
+
+ /* GPB1->OUTPUT, GPB1->0 */
+ gpio_direction_output(S3C2410_GPB(1), 0);
+ pwm_config(lcd_pwm, 0, LCD_PWM_PERIOD);
+ pwm_disable(lcd_pwm);
+
+ /* GPC0->0, GPC10->0 */
+ gpio_direction_output(S3C2410_GPC(0), 0);
+ gpio_direction_output(S3C2410_GPC(10), 0);
+ } else {
+ pwm_config(lcd_pwm, LCD_PWM_DUTY, LCD_PWM_PERIOD);
+ pwm_enable(lcd_pwm);
+
+ gpio_direction_output(S3C2410_GPC(0), 1);
+ gpio_direction_output(S3C2410_GPC(5), 1);
+
+ s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPB1_TOUT1);
+ gpio_direction_output(S3C2410_GPC(7), 1);
+
+ for (i = 1; i < 5; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPC(i), S3C_GPIO_SFN(2));
+
+ for (i = 2; i < 8; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ for (i = 11; i < 16; i++)
+ s3c_gpio_cfgpin(S3C2410_GPD(i), S3C_GPIO_SFN(2));
+
+ gpio_direction_output(S3C2410_GPC(10), 1);
+ gpio_direction_output(S3C2410_GPC(6), 1);
+ }
+ enabled = enable;
+}
+
+static void rx1950_bl_power(int enable)
+{
+ static int enabled;
+ if (enabled == enable)
+ return;
+ if (!enable) {
+ gpio_direction_output(S3C2410_GPB(0), 0);
+ } else {
+ /* LED driver need a "push" to power on */
+ gpio_direction_output(S3C2410_GPB(0), 1);
+ /* Warm up backlight for one period of PWM.
+ * Without this trick its almost impossible to
+ * enable backlight with low brightness value
+ */
+ ndelay(48000);
+ s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+ }
+ enabled = enable;
+}
+
+static int rx1950_backlight_init(struct device *dev)
+{
+ WARN_ON(gpio_request(S3C2410_GPB(0), "Backlight"));
+ lcd_pwm = pwm_request(1, "RX1950 LCD");
+ if (IS_ERR(lcd_pwm)) {
+ dev_err(dev, "Unable to request PWM for LCD power!\n");
+ return PTR_ERR(lcd_pwm);
+ }
+
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+
+ return 0;
+}
+
+static void rx1950_backlight_exit(struct device *dev)
+{
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+
+ pwm_free(lcd_pwm);
+ gpio_free(S3C2410_GPB(0));
+}
+
+
+static int rx1950_backlight_notify(struct device *dev, int brightness)
+{
+ if (!brightness) {
+ rx1950_bl_power(0);
+ rx1950_lcd_power(0);
+ } else {
+ rx1950_lcd_power(1);
+ rx1950_bl_power(1);
+ }
+ return brightness;
+}
+
+static struct platform_pwm_backlight_data rx1950_backlight_data = {
+ .pwm_id = 0,
+ .max_brightness = 24,
+ .dft_brightness = 4,
+ .pwm_period_ns = 48000,
+ .init = rx1950_backlight_init,
+ .notify = rx1950_backlight_notify,
+ .exit = rx1950_backlight_exit,
+};
+
+static struct platform_device rx1950_backlight = {
+ .name = "pwm-backlight",
+ .dev = {
+ .parent = &s3c_device_timer[0].dev,
+ .platform_data = &rx1950_backlight_data,
+ },
+};
+
+static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
+{
+ switch (power_mode) {
+ case MMC_POWER_OFF:
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+ break;
+ case MMC_POWER_UP:
+ case MMC_POWER_ON:
+ gpio_direction_output(S3C2410_GPJ(1), 1);
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c24xx_mci_pdata rx1950_mmc_cfg __initdata = {
+ .gpio_detect = S3C2410_GPF(5),
+ .gpio_wprotect = S3C2410_GPH(8),
+ .set_power = rx1950_set_mmc_power,
+ .ocr_avail = MMC_VDD_32_33,
+};
+
+static struct mtd_partition rx1950_nand_part[] = {
+ [0] = {
+ .name = "Boot0",
+ .offset = 0,
+ .size = 0x4000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [1] = {
+ .name = "Boot1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ [2] = {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x300000,
+ .mask_flags = 0,
+ },
+ [3] = {
+ .name = "Filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ },
+};
+
+static struct s3c2410_nand_set rx1950_nand_sets[] = {
+ [0] = {
+ .name = "Internal",
+ .nr_chips = 1,
+ .nr_partitions = ARRAY_SIZE(rx1950_nand_part),
+ .partitions = rx1950_nand_part,
+ },
+};
+
+static struct s3c2410_platform_nand rx1950_nand_info = {
+ .tacls = 25,
+ .twrph0 = 50,
+ .twrph1 = 15,
+ .nr_sets = ARRAY_SIZE(rx1950_nand_sets),
+ .sets = rx1950_nand_sets,
+};
+
+static void rx1950_udc_pullup(enum s3c2410_udc_cmd_e cmd)
+{
+ switch (cmd) {
+ case S3C2410_UDC_P_ENABLE:
+ gpio_direction_output(S3C2410_GPJ(5), 1);
+ break;
+ case S3C2410_UDC_P_DISABLE:
+ gpio_direction_output(S3C2410_GPJ(5), 0);
+ break;
+ case S3C2410_UDC_P_RESET:
+ break;
+ default:
+ break;
+ }
+}
+
+static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
+ .udc_command = rx1950_udc_pullup,
+ .vbus_pin = S3C2410_GPG(5),
+ .vbus_pin_inverted = 1,
+};
+
+static struct s3c2410_ts_mach_info rx1950_ts_cfg __initdata = {
+ .delay = 10000,
+ .presc = 49,
+ .oversampling_shift = 3,
+};
+
+static struct gpio_keys_button rx1950_gpio_keys_table[] = {
+ {
+ .code = KEY_POWER,
+ .gpio = S3C2410_GPF(0),
+ .active_low = 1,
+ .desc = "Power button",
+ .wakeup = 1,
+ },
+ {
+ .code = KEY_F5,
+ .gpio = S3C2410_GPF(7),
+ .active_low = 1,
+ .desc = "Record button",
+ },
+ {
+ .code = KEY_F1,
+ .gpio = S3C2410_GPG(0),
+ .active_low = 1,
+ .desc = "Calendar button",
+ },
+ {
+ .code = KEY_F2,
+ .gpio = S3C2410_GPG(2),
+ .active_low = 1,
+ .desc = "Contacts button",
+ },
+ {
+ .code = KEY_F3,
+ .gpio = S3C2410_GPG(3),
+ .active_low = 1,
+ .desc = "Mail button",
+ },
+ {
+ .code = KEY_F4,
+ .gpio = S3C2410_GPG(7),
+ .active_low = 1,
+ .desc = "WLAN button",
+ },
+ {
+ .code = KEY_LEFT,
+ .gpio = S3C2410_GPG(10),
+ .active_low = 1,
+ .desc = "Left button",
+ },
+ {
+ .code = KEY_RIGHT,
+ .gpio = S3C2410_GPG(11),
+ .active_low = 1,
+ .desc = "Right button",
+ },
+ {
+ .code = KEY_UP,
+ .gpio = S3C2410_GPG(4),
+ .active_low = 1,
+ .desc = "Up button",
+ },
+ {
+ .code = KEY_DOWN,
+ .gpio = S3C2410_GPG(6),
+ .active_low = 1,
+ .desc = "Down button",
+ },
+ {
+ .code = KEY_ENTER,
+ .gpio = S3C2410_GPG(9),
+ .active_low = 1,
+ .desc = "Ok button"
+ },
+};
+
+static struct gpio_keys_platform_data rx1950_gpio_keys_data = {
+ .buttons = rx1950_gpio_keys_table,
+ .nbuttons = ARRAY_SIZE(rx1950_gpio_keys_table),
+};
+
+static struct platform_device rx1950_device_gpiokeys = {
+ .name = "gpio-keys",
+ .dev.platform_data = &rx1950_gpio_keys_data,
+};
+
+static struct s3c2410_platform_i2c rx1950_i2c_data = {
+ .flags = 0,
+ .slave_addr = 0x42,
+ .frequency = 400 * 1000,
+ .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON,
+};
+
+static struct platform_device *rx1950_devices[] __initdata = {
+ &s3c_device_lcd,
+ &s3c_device_wdt,
+ &s3c_device_i2c0,
+ &s3c_device_iis,
+ &s3c_device_usbgadget,
+ &s3c_device_rtc,
+ &s3c_device_nand,
+ &s3c_device_sdi,
+ &s3c_device_adc,
+ &s3c_device_ts,
+ &s3c_device_timer[0],
+ &s3c_device_timer[1],
+ &rx1950_backlight,
+ &rx1950_device_gpiokeys,
+};
+
+static struct clk *rx1950_clocks[] __initdata = {
+ &s3c24xx_clkout0,
+ &s3c24xx_clkout1,
+};
+
+static void __init rx1950_map_io(void)
+{
+ s3c24xx_clkout0.parent = &clk_h;
+ s3c24xx_clkout1.parent = &clk_f;
+
+ s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
+
+ s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
+ s3c24xx_init_clocks(16934000);
+ s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
+
+ /* setup PM */
+
+#ifdef CONFIG_PM_H1940
+ memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 8);
+#endif
+
+ s3c_pm_init();
+}
+
+static void __init rx1950_init_machine(void)
+{
+ int i;
+
+ s3c24xx_fb_set_platdata(&rx1950_lcd_cfg);
+ s3c24xx_udc_set_platdata(&rx1950_udc_cfg);
+ s3c24xx_ts_set_platdata(&rx1950_ts_cfg);
+ s3c24xx_mci_set_platdata(&rx1950_mmc_cfg);
+ s3c_i2c0_set_platdata(&rx1950_i2c_data);
+ s3c_nand_set_platdata(&rx1950_nand_info);
+
+ /* Turn off suspend on both USB ports, and switch the
+ * selectable USB port to USB device mode. */
+ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
+ S3C2410_MISCCR_USBSUSPND0 |
+ S3C2410_MISCCR_USBSUSPND1, 0x0);
+
+ WARN_ON(gpio_request(S3C2410_GPJ(5), "UDC pullup"));
+ gpio_direction_output(S3C2410_GPJ(5), 0);
+
+ /* mmc power is disabled by default */
+ WARN_ON(gpio_request(S3C2410_GPJ(1), "MMC power"));
+ gpio_direction_output(S3C2410_GPJ(1), 0);
+
+ for (i = 0; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 10; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPC(i), "LCD power"));
+
+ for (i = 2; i < 8; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ for (i = 11; i < 16; i++)
+ WARN_ON(gpio_request(S3C2410_GPD(i), "LCD power"));
+
+ WARN_ON(gpio_request(S3C2410_GPB(1), "LCD power"));
+
+ platform_add_devices(rx1950_devices, ARRAY_SIZE(rx1950_devices));
+}
+
+MACHINE_START(RX1950, "HP iPAQ RX1950")
+ /* Maintainers: Vasily Khoruzhick */
+ .phys_io = S3C2410_PA_UART,
+ .io_pg_offst = (((u32) S3C24XX_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .map_io = rx1950_map_io,
+ .init_irq = s3c24xx_init_irq,
+ .init_machine = rx1950_init_machine,
+ .timer = &s3c24xx_timer,
+MACHINE_END
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1e836e506f8..d2946de3f36 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -209,7 +209,7 @@ static void __init rx3715_init_machine(void)
}
MACHINE_START(RX3715, "IPAQ-RX3715")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index 3ac3d636d61..df83276d85a 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -174,7 +174,7 @@ static void __init smdk2440_machine_init(void)
}
MACHINE_START(S3C2440, "SMDK2440")
- /* Maintainer: Ben Dooks <ben@fluff.org> */
+ /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c
index 2b68f7ea45a..d50f3ae6173 100644
--- a/arch/arm/mach-s3c2440/s3c2440.c
+++ b/arch/arm/mach-s3c2440/s3c2440.c
@@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
@@ -33,6 +34,10 @@
#include <plat/cpu.h>
#include <plat/s3c244x.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
static struct sys_device s3c2440_sysdev = {
.cls = &s3c2440_sysclass,
};
@@ -41,6 +46,9 @@ int __init s3c2440_init(void)
{
printk("S3C2440: Initialising architecture\n");
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-11 06:22:11 +0000