diff options
Diffstat (limited to 'arch/arm/mach-shmobile/board-ap4evb.c')
-rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 326 |
1 files changed, 215 insertions, 111 deletions
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 14923989ea0..f5d55efda38 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -30,7 +30,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> -#include <linux/mmc/host.h> #include <linux/mmc/sh_mmcif.h> #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> @@ -44,6 +43,10 @@ #include <linux/input/sh_keysc.h> #include <linux/usb/r8a66597.h> +#include <media/sh_mobile_ceu.h> +#include <media/sh_mobile_csi2.h> +#include <media/soc_camera.h> + #include <sound/sh_fsi.h> #include <video/sh_mobile_hdmi.h> @@ -238,7 +241,7 @@ static struct platform_device smc911x_device = { /* SH_MMCIF */ static struct resource sh_mmcif_resources[] = { [0] = { - .name = "SH_MMCIF", + .name = "MMCIF", .start = 0xE6BD0000, .end = 0xE6BD00FF, .flags = IORESOURCE_MEM, @@ -375,10 +378,40 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; +const static struct fb_videomode ap4evb_lcdc_modes[] = { + { +#ifdef CONFIG_AP4EVB_QHD + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, +#else + .name = "WVGA Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, +#endif + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .chan = LCDC_CHAN_MAINLCD, .bpp = 16, + .lcd_cfg = ap4evb_lcdc_modes, + .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), } }; @@ -517,27 +550,6 @@ static struct platform_device *qhd_devices[] __initdata = { /* FSI */ #define IRQ_FSI evt2irq(0x1840) -#define FSIACKCR 0xE6150018 -static void fsiackcr_init(struct clk *clk) -{ - u32 status = __raw_readl(clk->enable_reg); - - /* use external clock */ - status &= ~0x000000ff; - status |= 0x00000080; - __raw_writel(status, clk->enable_reg); -} - -static struct clk_ops fsiackcr_clk_ops = { - .init = fsiackcr_init, -}; - -static struct clk fsiackcr_clk = { - .ops = &fsiackcr_clk_ops, - .enable_reg = (void __iomem *)FSIACKCR, - .rate = 0, /* unknown */ -}; - static struct sh_fsi_platform_info fsi_info = { .porta_flags = SH_FSI_BRS_INV | SH_FSI_OUT_SLAVE_MODE | @@ -577,26 +589,6 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, - .lcd_cfg = { - .name = "HDMI", - /* So far only 720p is supported */ - .xres = 1280, - .yres = 720, - /* - * If left and right margins are not multiples of 8, - * LDHAJR will be adjusted accordingly by the LCDC - * driver. Until we start using EDID, these values - * might have to be adjusted for different monitors. - */ - .left_margin = 200, - .right_margin = 88, - .hsync_len = 48, - .upper_margin = 20, - .lower_margin = 5, - .vsync_len = 5, - .pixclock = 13468, - .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, - }, } }; @@ -608,7 +600,7 @@ static struct resource lcdc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = intcs_evt2irq(0x17a0), + .start = intcs_evt2irq(0x1780), .flags = IORESOURCE_IRQ, }, }; @@ -689,6 +681,95 @@ static struct platform_device leds_device = { }, }; +static struct i2c_board_info imx074_info = { + I2C_BOARD_INFO("imx074", 0x1a), +}; + +struct soc_camera_link imx074_link = { + .bus_id = 0, + .board_info = &imx074_info, + .i2c_adapter_id = 0, + .module_name = "imx074", +}; + +static struct platform_device ap4evb_camera = { + .name = "soc-camera-pdrv", + .id = 0, + .dev = { + .platform_data = &imx074_link, + }, +}; + +static struct sh_csi2_client_config csi2_clients[] = { + { + .phy = SH_CSI2_PHY_MAIN, + .lanes = 3, + .channel = 0, + .pdev = &ap4evb_camera, + }, +}; + +static struct sh_csi2_pdata csi2_info = { + .type = SH_CSI2C, + .clients = csi2_clients, + .num_clients = ARRAY_SIZE(csi2_clients), + .flags = SH_CSI2_ECC | SH_CSI2_CRC, +}; + +static struct resource csi2_resources[] = { + [0] = { + .name = "CSI2", + .start = 0xffc90000, + .end = 0xffc90fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x17a0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device csi2_device = { + .name = "sh-mobile-csi2", + .id = 0, + .num_resources = ARRAY_SIZE(csi2_resources), + .resource = csi2_resources, + .dev = { + .platform_data = &csi2_info, + }, +}; + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SH_CEU_FLAG_USE_8BIT_BUS, + .csi2_dev = &csi2_device.dev, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x880), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .id = 0, /* "ceu0" clock */ + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + static struct platform_device *ap4evb_devices[] __initdata = { &leds_device, &nor_flash_device, @@ -701,6 +782,9 @@ static struct platform_device *ap4evb_devices[] __initdata = { &lcdc1_device, &lcdc_device, &hdmi_device, + &csi2_device, + &ceu_device, + &ap4evb_camera, }; static int __init hdmi_init_pm_clock(void) @@ -715,22 +799,22 @@ static int __init hdmi_init_pm_clock(void) goto out; } - ret = clk_set_parent(&pllc2_clk, &dv_clki_div2_clk); + ret = clk_set_parent(&sh7372_pllc2_clk, &sh7372_dv_clki_div2_clk); if (ret < 0) { - pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, pllc2_clk.usecount); + pr_err("Cannot set PLLC2 parent: %d, %d users\n", ret, sh7372_pllc2_clk.usecount); goto out; } - pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&pllc2_clk)); + pr_debug("PLLC2 initial frequency %lu\n", clk_get_rate(&sh7372_pllc2_clk)); - rate = clk_round_rate(&pllc2_clk, 594000000); + rate = clk_round_rate(&sh7372_pllc2_clk, 594000000); if (rate < 0) { pr_err("Cannot get suitable rate: %ld\n", rate); ret = rate; goto out; } - ret = clk_set_rate(&pllc2_clk, rate); + ret = clk_set_rate(&sh7372_pllc2_clk, rate); if (ret < 0) { pr_err("Cannot set rate %ld: %d\n", rate, ret); goto out; @@ -738,7 +822,7 @@ static int __init hdmi_init_pm_clock(void) pr_debug("PLLC2 set frequency %lu\n", rate); - ret = clk_set_parent(hdmi_ick, &pllc2_clk); + ret = clk_set_parent(hdmi_ick, &sh7372_pllc2_clk); if (ret < 0) { pr_err("Cannot set HDMI parent: %d\n", ret); goto out; @@ -752,11 +836,51 @@ out: device_initcall(hdmi_init_pm_clock); +#define FSIACK_DUMMY_RATE 48000 +static int __init fsi_init_pm_clock(void) +{ + struct clk *fsia_ick; + int ret; + + /* + * FSIACK is connected to AK4642, + * and the rate is depend on playing sound rate. + * So, set dummy rate (= 48k) here + */ + ret = clk_set_rate(&sh7372_fsiack_clk, FSIACK_DUMMY_RATE); + if (ret < 0) { + pr_err("Cannot set FSIACK dummy rate: %d\n", ret); + return ret; + } + + fsia_ick = clk_get(&fsi_device.dev, "icka"); + if (IS_ERR(fsia_ick)) { + ret = PTR_ERR(fsia_ick); + pr_err("Cannot get FSI ICK: %d\n", ret); + return ret; + } + + ret = clk_set_parent(fsia_ick, &sh7372_fsiack_clk); + if (ret < 0) { + pr_err("Cannot set FSI-A parent: %d\n", ret); + goto out; + } + + ret = clk_set_rate(fsia_ick, FSIACK_DUMMY_RATE); + if (ret < 0) + pr_err("Cannot set FSI-A rate: %d\n", ret); + +out: + clk_put(fsia_ick); + + return ret; +} +device_initcall(fsi_init_pm_clock); + /* * FIXME !! * * gpio_no_direction - * gpio_pull_up * are quick_hack. * * current gpio frame work doesn't have @@ -768,49 +892,37 @@ static void __init gpio_no_direction(u32 addr) __raw_writeb(0x00, addr); } -static void __init gpio_pull_up(u32 addr) -{ - u8 data = __raw_readb(addr); - - data &= 0x0F; - data |= 0xC0; - __raw_writeb(data, addr); -} - /* TouchScreen */ +#ifdef CONFIG_AP4EVB_QHD +# define GPIO_TSC_IRQ GPIO_FN_IRQ28_123 +# define GPIO_TSC_PORT GPIO_PORT123 +#else /* WVGA */ +# define GPIO_TSC_IRQ GPIO_FN_IRQ7_40 +# define GPIO_TSC_PORT GPIO_PORT40 +#endif + #define IRQ28 evt2irq(0x3380) /* IRQ28A */ #define IRQ7 evt2irq(0x02e0) /* IRQ7A */ static int ts_get_pendown_state(void) { - int val1, val2; + int val; - gpio_free(GPIO_FN_IRQ28_123); - gpio_free(GPIO_FN_IRQ7_40); + gpio_free(GPIO_TSC_IRQ); - gpio_request(GPIO_PORT123, NULL); - gpio_request(GPIO_PORT40, NULL); + gpio_request(GPIO_TSC_PORT, NULL); - gpio_direction_input(GPIO_PORT123); - gpio_direction_input(GPIO_PORT40); + gpio_direction_input(GPIO_TSC_PORT); - val1 = gpio_get_value(GPIO_PORT123); - val2 = gpio_get_value(GPIO_PORT40); + val = gpio_get_value(GPIO_TSC_PORT); - gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ - gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ + gpio_request(GPIO_TSC_IRQ, NULL); - return val1 ^ val2; + return !val; } -#define PORT40CR 0xE6051028 -#define PORT123CR 0xE605007B static int ts_init(void) { - gpio_request(GPIO_FN_IRQ28_123, NULL); /* for QHD */ - gpio_request(GPIO_FN_IRQ7_40, NULL); /* for WVGA */ - - gpio_pull_up(PORT40CR); - gpio_pull_up(PORT123CR); + gpio_request(GPIO_TSC_IRQ, NULL); return 0; } @@ -955,14 +1067,6 @@ static void __init ap4evb_init(void) clk_put(clk); } - /* change parent of FSI A */ - clk = clk_get(NULL, "fsia_clk"); - if (!IS_ERR(clk)) { - clk_register(&fsiackcr_clk); - clk_set_parent(clk, &fsiackcr_clk); - clk_put(clk); - } - /* * set irq priority, to avoid sound chopping * when NFS rootfs is used @@ -977,8 +1081,10 @@ static void __init ap4evb_init(void) ARRAY_SIZE(i2c1_devices)); #ifdef CONFIG_AP4EVB_QHD + /* - * QHD + * For QHD Panel (MIPI-DSI, CONFIG_AP4EVB_QHD=y) and + * IRQ28 for Touch Panel, set dip switches S3, S43 as OFF, ON. */ /* enable KEYSC */ @@ -1004,17 +1110,6 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB24; lcdc_info.ch[0].clock_divider = 1; lcdc_info.ch[0].flags = LCDC_FLAGS_DWPOL; - lcdc_info.ch[0].lcd_cfg.name = "R63302(QHD)"; - lcdc_info.ch[0].lcd_cfg.xres = 544; - lcdc_info.ch[0].lcd_cfg.yres = 961; - lcdc_info.ch[0].lcd_cfg.left_margin = 72; - lcdc_info.ch[0].lcd_cfg.right_margin = 600; - lcdc_info.ch[0].lcd_cfg.hsync_len = 16; - lcdc_info.ch[0].lcd_cfg.upper_margin = 8; - lcdc_info.ch[0].lcd_cfg.lower_margin = 8; - lcdc_info.ch[0].lcd_cfg.vsync_len = 2; - lcdc_info.ch[0].lcd_cfg.sync = FB_SYNC_VERT_HIGH_ACT | - FB_SYNC_HOR_HIGH_ACT; lcdc_info.ch[0].lcd_size_cfg.width = 44; lcdc_info.ch[0].lcd_size_cfg.height = 79; @@ -1022,8 +1117,10 @@ static void __init ap4evb_init(void) #else /* - * WVGA + * For WVGA Panel (18-bit RGB, CONFIG_AP4EVB_WVGA=y) and + * IRQ7 for Touch Panel, set dip switches S3, S43 to ON, OFF. */ + gpio_request(GPIO_FN_LCDD17, NULL); gpio_request(GPIO_FN_LCDD16, NULL); gpio_request(GPIO_FN_LCDD15, NULL); @@ -1055,16 +1152,6 @@ static void __init ap4evb_init(void) lcdc_info.ch[0].interface_type = RGB18; lcdc_info.ch[0].clock_divider = 2; lcdc_info.ch[0].flags = 0; - lcdc_info.ch[0].lcd_cfg.name = "WVGA Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; - lcdc_info.ch[0].lcd_cfg.sync = 0; lcdc_info.ch[0].lcd_size_cfg.width = 152; lcdc_info.ch[0].lcd_size_cfg.height = 91; @@ -1075,6 +1162,23 @@ static void __init ap4evb_init(void) i2c_register_board_info(0, &tsc_device, 1); #endif /* CONFIG_AP4EVB_QHD */ + /* CEU */ + + /* + * TODO: reserve memory for V4L2 DMA buffers, when a suitable API + * becomes available + */ + + /* MIPI-CSI stuff */ + gpio_request(GPIO_FN_VIO_CKO, NULL); + + clk = clk_get(NULL, "vck1_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 13000000)); + clk_enable(clk); + clk_put(clk); + } + sh7372_add_standard_devices(); /* HDMI */ @@ -1097,7 +1201,7 @@ static void __init ap4evb_timer_init(void) shmobile_timer.init(); /* External clock source */ - clk_set_rate(&dv_clki_clk, 27000000); + clk_set_rate(&sh7372_dv_clki_clk, 27000000); } static struct sys_timer ap4evb_timer = { |