4 files changed, 5 insertions, 18 deletions
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index e1dfa24b4fb..0e928d28175 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -40,7 +40,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -752,7 +751,6 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.init_time	= ux500_timer_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -762,7 +760,6 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.init_time	= ux500_timer_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= mop500_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -773,7 +770,6 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
 	.map_io		= u8500_map_io,
 	.init_irq	= ux500_init_irq,
 	.init_time	= ux500_timer_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= hrefv60_init_machine,
 	.init_late	= ux500_init_late,
 MACHINE_END
@@ -785,7 +781,6 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.init_time	= ux500_timer_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= snowball_init_machine,
 	.init_late	= NULL,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index c1fb38b5ed9..218a6b1ada7 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -342,7 +341,6 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
 	.init_irq	= ux500_init_irq,
 	/* we re-use nomadik timer here */
 	.init_time	= ux500_timer_init,
-	.handle_irq	= gic_handle_irq,
 	.init_machine	= u8500_init_machine,
 	.init_late	= NULL,
 	.dt_compat      = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 721e7b4275f..5dd90d31ffc 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -17,9 +17,10 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-ux500.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -42,11 +43,6 @@ void __iomem *_PRCMU_BASE;
  * This feels fragile because it depends on the gpio device getting probed
  * _before_ any device uses the gpio interrupts.
 */
-static const struct of_device_id ux500_dt_irq_match[] = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{},
-};
-
 void __init ux500_init_irq(void)
 {
 	void __iomem *dist_base;
@@ -62,7 +58,7 @@ void __init ux500_init_irq(void)
 
 #ifdef CONFIG_OF
 	if (of_have_populated_dt())
-		of_irq_init(ux500_dt_irq_match);
+		irqchip_init();
 	else
 #endif
 		gic_init(0, 29, dist_base, cpu_base);
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 3db7782f3af..b8adac93421 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -16,9 +16,9 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
@@ -91,7 +91,7 @@ static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	smp_send_reschedule(cpu);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
@@ -155,8 +155,6 @@ static void __init ux500_smp_init_cpus(void)
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
-
-	set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)