diff options
Diffstat (limited to 'arch/arm')
54 files changed, 3172 insertions, 2844 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d260836339..2e86b8f6210 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -14,6 +14,7 @@ config ARM select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) select HAVE_GENERIC_DMA_COHERENT select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO @@ -38,6 +39,9 @@ config HAVE_PWM config SYS_SUPPORTS_APM_EMULATION bool +config HAVE_SCHED_CLOCK + bool + config GENERIC_GPIO bool @@ -233,6 +237,7 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select COMMON_CLKDEV + select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -247,6 +252,7 @@ config ARCH_VERSATILE select ARM_AMBA select ARM_VIC select COMMON_CLKDEV + select HAVE_SCHED_CLOCK select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -263,6 +269,7 @@ config ARCH_VEXPRESS select COMMON_CLKDEV select GENERIC_CLOCKEVENTS select HAVE_CLK + select HAVE_SCHED_CLOCK select ICST select PLAT_VERSATILE help @@ -434,6 +441,7 @@ config ARCH_IXP4XX select CPU_XSCALE select GENERIC_GPIO select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. @@ -509,6 +517,7 @@ config ARCH_MMP select ARCH_REQUIRE_GPIOLIB select COMMON_CLKDEV select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -565,6 +574,7 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK + select HAVE_SCHED_CLOCK select COMMON_CLKDEV select ARCH_HAS_BARRIERS if CACHE_L2X0 select ARCH_HAS_CPUFREQ @@ -588,6 +598,7 @@ config ARCH_PXA select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -636,6 +647,7 @@ config ARCH_SA1100 select CPU_FREQ select GENERIC_CLOCKEVENTS select HAVE_CLK + select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB help @@ -782,6 +794,7 @@ config ARCH_U300 bool "ST-Ericsson U300 Series" depends on MMU select CPU_ARM926T + select HAVE_SCHED_CLOCK select HAVE_TCM select ARM_AMBA select ARM_VIC @@ -830,6 +843,7 @@ config ARCH_OMAP select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -983,9 +997,11 @@ config ARCH_ACORN config PLAT_IOP bool select GENERIC_CLOCKEVENTS + select HAVE_SCHED_CLOCK config PLAT_ORION bool + select HAVE_SCHED_CLOCK config PLAT_PXA bool @@ -1212,10 +1228,11 @@ config SMP depends on EXPERIMENTAL depends on GENERIC_CLOCKEVENTS depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \ - MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\ - ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 + MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ + ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ + ARCH_MSM_SCORPIONMP select USE_GENERIC_SMP_HELPERS - select HAVE_ARM_SCU + select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1290,6 +1307,7 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL + depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1298,7 +1316,7 @@ config LOCAL_TIMERS bool "Use local timer interrupts" depends on SMP default y - select HAVE_ARM_TWD + select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP help Enable support for local timers on SMP platforms, rather then the legacy IPI broadcast method. Local timers allows the system diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 2fd0b99afc4..eac62085f5b 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -23,7 +23,7 @@ config STRICT_DEVMEM config FRAME_POINTER bool depends on !THUMB2_KERNEL - default y if !ARM_UNWIND + default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER help If you say N here, the resulting kernel will be slightly smaller and faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled, diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index 4740313daa5..6ef3342153b 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -44,7 +44,6 @@ static struct clocksource clocksource_sp804 = { .rating = 200, .read = sp804_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -61,8 +60,7 @@ void __init sp804_clocksource_init(void __iomem *base) writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, clksrc_base + TIMER_CTRL); - cs->mult = clocksource_khz2mult(TIMER_FREQ_KHZ, cs->shift); - clocksource_register(cs); + clocksource_register_khz(cs, TIMER_FREQ_KHZ); } diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h new file mode 100644 index 00000000000..a84628be1a7 --- /dev/null +++ b/arch/arm/include/asm/sched_clock.h @@ -0,0 +1,118 @@ +/* + * sched_clock.h: support for extending counters to full 64-bit ns counter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASM_SCHED_CLOCK +#define ASM_SCHED_CLOCK + +#include <linux/kernel.h> +#include <linux/types.h> + +struct clock_data { + u64 epoch_ns; + u32 epoch_cyc; + u32 epoch_cyc_copy; + u32 mult; + u32 shift; +}; + +#define DEFINE_CLOCK_DATA(name) struct clock_data name + +static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +{ + return (cyc * mult) >> shift; +} + +/* + * Atomically update the sched_clock epoch. Your update callback will + * be called from a timer before the counter wraps - read the current + * counter value, and call this function to safely move the epochs + * forward. Only use this from the update callback. + */ +static inline void update_sched_clock(struct clock_data *cd, u32 cyc, u32 mask) +{ + unsigned long flags; + u64 ns = cd->epoch_ns + + cyc_to_ns((cyc - cd->epoch_cyc) & mask, cd->mult, cd->shift); + + /* + * Write epoch_cyc and epoch_ns in a way that the update is + * detectable in cyc_to_fixed_sched_clock(). + */ + raw_local_irq_save(flags); + cd->epoch_cyc = cyc; + smp_wmb(); + cd->epoch_ns = ns; + smp_wmb(); + cd->epoch_cyc_copy = cyc; + raw_local_irq_restore(flags); +} + +/* + * If your clock rate is known at compile time, using this will allow + * you to optimize the mult/shift loads away. This is paired with + * init_fixed_sched_clock() to ensure that your mult/shift are correct. + */ +static inline unsigned long long cyc_to_fixed_sched_clock(struct clock_data *cd, + u32 cyc, u32 mask, u32 mult, u32 shift) +{ + u64 epoch_ns; + u32 epoch_cyc; + + /* + * Load the epoch_cyc and epoch_ns atomically. We do this by + * ensuring that we always write epoch_cyc, epoch_ns and + * epoch_cyc_copy in strict order, and read them in strict order. + * If epoch_cyc and epoch_cyc_copy are not equal, then we're in + * the middle of an update, and we should repeat the load. + */ + do { + epoch_cyc = cd->epoch_cyc; + smp_rmb(); + epoch_ns = cd->epoch_ns; + smp_rmb(); + } while (epoch_cyc != cd->epoch_cyc_copy); + + return epoch_ns + cyc_to_ns((cyc - epoch_cyc) & mask, mult, shift); +} + +/* + * Otherwise, you need to use this, which will obtain the mult/shift + * from the clock_data structure. Use init_sched_clock() with this. + */ +static inline unsigned long long cyc_to_sched_clock(struct clock_data *cd, + u32 cyc, u32 mask) +{ + return cyc_to_fixed_sched_clock(cd, cyc, mask, cd->mult, cd->shift); +} + +/* + * Initialize the clock data - calculate the appropriate multiplier + * and shift. Also setup a timer to ensure that the epoch is refreshed + * at the appropriate time interval, which will call your update + * handler. + */ +void init_sched_clock(struct clock_data *, void (*)(void), + unsigned int, unsigned long); + +/* + * Use this initialization function rather than init_sched_clock() if + * you're using cyc_to_fixed_sched_clock, which will warn if your + * constants are incorrect. + */ +static inline void init_fixed_sched_clock(struct clock_data *cd, + void (*update)(void), unsigned int bits, unsigned long rate, + u32 mult, u32 shift) +{ + init_sched_clock(cd, update, bits, rate); + if (cd->mult != mult || cd->shift != shift) { + pr_crit("sched_clock: wrong multiply/shift: %u>>%u vs calculated %u>>%u\n" + "sched_clock: fix multiply/shift to avoid scheduler hiccups\n", + mult, shift, cd->mult, cd->shift); + } +} + +#endif diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 80025948b8a..3222ab8b344 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -63,6 +63,11 @@ #include <asm/outercache.h> #define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif struct thread_info; struct task_struct; diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 491960bf426..124475afb00 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -15,13 +15,32 @@ struct undef_hook { void register_undef_hook(struct undef_hook *hook); void unregister_undef_hook(struct undef_hook *hook); +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +static inline int __in_irqentry_text(unsigned long ptr) +{ + extern char __irqentry_text_start[]; + extern char __irqentry_text_end[]; + + return ptr >= (unsigned long)&__irqentry_text_start && + ptr < (unsigned long)&__irqentry_text_end; +} +#else +static inline int __in_irqentry_text(unsigned long ptr) +{ + return 0; +} +#endif + static inline int in_exception_text(unsigned long ptr) { extern char __exception_text_start[]; extern char __exception_text_end[]; + int in; + + in = ptr >= (unsigned long)&__exception_text_start && + ptr < (unsigned long)&__exception_text_end; - return ptr >= (unsigned long)&__exception_text_start && - ptr < (unsigned long)&__exception_text_end; + return in ? : __in_irqentry_text(ptr); } extern void __init early_trap_init(void); diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5b9b268f4fb..fd3ec49bfba 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -5,7 +5,7 @@ CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET) AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET) -ifdef CONFIG_DYNAMIC_FTRACE +ifdef CONFIG_FUNCTION_TRACER CFLAGS_REMOVE_ftrace.o = -pg endif @@ -29,10 +29,12 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o +obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o +obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o obj-$(CONFIG_ATAGS_PROC) += atags.o diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 80bf8cd88d7..1e7b04a40a3 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -147,98 +147,170 @@ ENDPROC(ret_from_fork) #endif #endif -#ifdef CONFIG_DYNAMIC_FTRACE -ENTRY(__gnu_mcount_nc) - mov ip, lr - ldmia sp!, {lr} - mov pc, ip -ENDPROC(__gnu_mcount_nc) +.macro __mcount suffix + mcount_enter + ldr r0, =ftrace_trace_function + ldr r2, [r0] + adr r0, .Lftrace_stub + cmp r0, r2 + bne 1f + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + ldr r1, =ftrace_graph_return + ldr r2, [r1] + cmp r0, r2 + bne ftrace_graph_caller\suffix + + ldr r1, =ftrace_graph_entry + ldr r2, [r1] + ldr r0, =ftrace_graph_entry_stub + cmp r0, r2 + bne ftrace_graph_caller\suffix +#endif -ENTRY(ftrace_caller) - stmdb sp!, {r0-r3, lr} - mov r0, lr + mcount_exit + +1: mcount_get_lr r1 @ lr of instrumented func + mov r0, lr @ instrumented function + sub r0, r0, #MCOUNT_INSN_SIZE + adr lr, BSYM(2f) + mov pc, r2 +2: mcount_exit +.endm + +.macro __ftrace_caller suffix + mcount_enter + + mcount_get_lr r1 @ lr of instrumented func + mov r0, lr @ instrumented function sub r0, r0, #MCOUNT_INSN_SIZE - ldr r1, [sp, #20] - .global ftrace_call -ftrace_call: + .globl ftrace_call\suffix +ftrace_call\suffix: bl ftrace_stub - ldmia sp!, {r0-r3, ip, lr} - mov pc, ip -ENDPROC(ftrace_caller) + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl ftrace_graph_call\suffix +ftrace_graph_call\suffix: + mov r0, r0 +#endif + + mcount_exit +.endm + +.macro __ftrace_graph_caller + sub r0, fp, #4 @ &lr of instrumented routine (&parent) +#ifdef CONFIG_DYNAMIC_FTRACE + @ called from __ftrace_caller, saved in mcount_enter + ldr r1, [sp, #16] @ instrumented routine (func) +#else + @ called from __mcount, untouched in lr + mov r1, lr @ instrumented routine (func) +#endif + sub r1, r1, #MCOUNT_INSN_SIZE + mov r2, fp @ frame pointer + bl prepare_ftrace_return + mcount_exit +.endm #ifdef CONFIG_OLD_MCOUNT +/* + * mcount + */ + +.macro mcount_enter + stmdb sp!, {r0-r3, lr} +.endm + +.macro mcount_get_lr reg + ldr \reg, [fp, #-4] +.endm + +.macro mcount_exit + ldr lr, [fp, #-4] + ldmia sp!, {r0-r3, pc} +.endm + ENTRY(mcount) +#ifdef CONFIG_DYNAMIC_FTRACE stmdb sp!, {lr} ldr lr, [fp, #-4] ldmia sp!, {pc} +#else + __mcount _old +#endif ENDPROC(mcount) +#ifdef CONFIG_DYNAMIC_FTRACE ENTRY(ftrace_caller_old) - stmdb sp!, {r0-r3, lr} - ldr r1, [fp, #-4] - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - - .globl ftrace_call_old -ftrace_call_old: - bl ftrace_stub - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} + __ftrace_caller _old ENDPROC(ftrace_caller_old) #endif -#else +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller_old) + __ftrace_graph_caller +ENDPROC(ftrace_graph_caller_old) +#endif -ENTRY(__gnu_mcount_nc) +.purgem mcount_enter +.purgem mcount_get_lr +.purgem mcount_exit +#endif + +/* + * __gnu_mcount_nc + */ + +.macro mcount_enter stmdb sp!, {r0-r3, lr} - ldr r0, =ftrace_trace_function - ldr r2, [r0] - adr r0, .Lftrace_stub - cmp r0, r2 - bne gnu_trace +.endm + +.macro mcount_get_lr reg + ldr \reg, [sp, #20] +.endm + +.macro mcount_exit ldmia sp!, {r0-r3, ip, lr} mov pc, ip +.endm -gnu_trace: - ldr r1, [sp, #20] @ lr of instrumented routine - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - adr lr, BSYM(1f) - mov pc, r2 -1: - ldmia sp!, {r0-r3, ip, lr} +ENTRY(__gnu_mcount_nc) +#ifdef CONFIG_DYNAMIC_FTRACE + mov ip, lr + ldmia sp!, {lr} mov pc, ip +#else + __mcount +#endif ENDPROC(__gnu_mcount_nc) -#ifdef CONFIG_OLD_MCOUNT -/* - * This is under an ifdef in order to force link-time errors for people trying - * to build with !FRAME_POINTER with a GCC which doesn't use the new-style - * mcount. - */ -ENTRY(mcount) - stmdb sp!, {r0-r3, lr} - ldr r0, =ftrace_trace_function - ldr r2, [r0] - adr r0, ftrace_stub - cmp r0, r2 - bne trace - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} +#ifdef CONFIG_DYNAMIC_FTRACE +ENTRY(ftrace_caller) + __ftrace_caller +ENDPROC(ftrace_caller) +#endif -trace: - ldr r1, [fp, #-4] @ lr of instrumented routine - mov r0, lr - sub r0, r0, #MCOUNT_INSN_SIZE - mov lr, pc - mov pc, r2 - ldr lr, [fp, #-4] @ restore lr - ldmia sp!, {r0-r3, pc} -ENDPROC(mcount) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +ENTRY(ftrace_graph_caller) + __ftrace_graph_caller +ENDPROC(ftrace_graph_caller) #endif -#endif /* CONFIG_DYNAMIC_FTRACE */ +.purgem mcount_enter +.purgem mcount_get_lr +.purgem mcount_exit + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER + .globl return_to_handler +return_to_handler: + stmdb sp!, {r0-r3} + mov r0, fp @ frame pointer + bl ftrace_return_to_handler + mov lr, r0 @ r0 has real ret addr + ldmia sp!, {r0-r3} + mov pc, lr +#endif ENTRY(ftrace_stub) .Lftrace_stub: diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index 971ac8c36ea..c0062ad1e84 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -24,6 +24,7 @@ #define NOP 0xe8bd4000 /* pop {lr} */ #endif +#ifdef CONFIG_DYNAMIC_FTRACE #ifdef CONFIG_OLD_MCOUNT #define OLD_MCOUNT_ADDR ((unsigned long) mcount) #define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old) @@ -59,9 +60,9 @@ static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr) } #endif -/* construct a branch (BL) instruction to addr */ #ifdef CONFIG_THUMB2_KERNEL -static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, + bool link) { unsigned long s, j1, j2, i1, i2, imm10, imm11; unsigned long first, second; @@ -83,15 +84,22 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) j2 = (!i2) ^ s; first = 0xf000 | (s << 10) | imm10; - second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11; + second = 0x9000 | (j1 << 13) | (j2 << 11) | imm11; + if (link) + second |= 1 << 14; return (second << 16) | first; } #else -static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +static unsigned long ftrace_gen_branch(unsigned long pc, unsigned long addr, + bool link) { + unsigned long opcode = 0xea000000; long offset; + if (link) + opcode |= 1 << 24; + offset = (long)addr - (long)(pc + 8); if (unlikely(offset < -33554432 || offset > 33554428)) { /* Can't generate branches that far (from ARM ARM). Ftrace @@ -103,10 +111,15 @@ static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) offset = (offset >> 2) & 0x00ffffff; - return 0xeb000000 | offset; + return opcode | offset; } #endif +static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr) +{ + return ftrace_gen_branch(pc, addr, true); +} + static int ftrace_modify_code(unsigned long pc, unsigned long old, unsigned long new) { @@ -193,3 +206,83 @@ int __init ftrace_dyn_arch_init(void *data) return 0; } +#endif /* CONFIG_DYNAMIC_FTRACE */ + +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, + unsigned long frame_pointer) +{ + unsigned long return_hooker = (unsigned long) &return_to_handler; + struct ftrace_graph_ent trace; + unsigned long old; + int err; + + if (unlikely(atomic_read(¤t->tracing_graph_pause))) + return; + + old = *parent; + *parent = return_hooker; + + err = ftrace_push_return_trace(old, self_addr, &trace.depth, + frame_pointer); + if (err == -EBUSY) { + *parent = old; + return; + } + + trace.func = self_addr; + + /* Only trace if the calling function expects to */ + if (!ftrace_graph_entry(&trace)) { + current->curr_ret_stack--; + *parent = old; + } +} + +#ifdef CONFIG_DYNAMIC_FTRACE +extern unsigned long ftrace_graph_call; +extern unsigned long ftrace_graph_call_old; +extern void ftrace_graph_caller_old(void); + +static int __ftrace_modify_caller(unsigned long *callsite, + void (*func) (void), bool enable) +{ + unsigned long caller_fn = (unsigned long) func; + unsigned long pc = (unsigned long) callsite; + unsigned long branch = ftrace_gen_branch(pc, caller_fn, false); + unsigned long nop = 0xe1a00000; /* mov r0, r0 */ + unsigned long old = enable ? nop : branch; + unsigned long new = enable ? branch : nop; + + return ftrace_modify_code(pc, old, new); +} + +static int ftrace_modify_graph_caller(bool enable) +{ + int ret; + + ret = __ftrace_modify_caller(&ftrace_graph_call, + ftrace_graph_caller, + enable); + +#ifdef CONFIG_OLD_MCOUNT + if (!ret) + ret = __ftrace_modify_caller(&ftrace_graph_call_old, + ftrace_graph_caller_old, + enable); +#endif + + return ret; +} + +int ftrace_enable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(true); +} + +int ftrace_disable_ftrace_graph_caller(void) +{ + return ftrace_modify_graph_caller(false); +} +#endif /* CONFIG_DYNAMIC_FTRACE */ +#endif /* CONFIG_FUNCTION_GRAPH_TRACER */ diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 36ad3be4692..6d616333340 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,6 +35,7 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> +#include <linux/ftrace.h> #include <asm/system.h> #include <asm/mach/irq.h> @@ -105,7 +106,8 @@ unlock: * come via this function. Instead, they should provide their * own 'handler' */ -asmlinkage void __exception asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +asmlinkage void __exception_irq_entry +asm_do_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 07a50357492..421a4bb88fe 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -4,9 +4,7 @@ * ARM performance counter support. * * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles - * - * ARMv7 support: Jean Pihet <jpihet@mvista.com> - * 2010 (c) MontaVista Software, LLC. + * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com> * * This code is based on the sparc64 perf event code, which is in turn based * on the x86 code. Callchain code is based on the ARM OProfile backtrace @@ -69,29 +67,23 @@ struct cpu_hw_events { }; DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); -/* PMU names. */ -static const char *arm_pmu_names[] = { - [ARM_PERF_PMU_ID_XSCALE1] = "xscale1", - [ARM_PERF_PMU_ID_XSCALE2] = "xscale2", - [ARM_PERF_PMU_ID_V6] = "v6", - [ARM_PERF_PMU_ID_V6MP] = "v6mpcore", - [ARM_PERF_PMU_ID_CA8] = "ARMv7 Cortex-A8", - [ARM_PERF_PMU_ID_CA9] = "ARMv7 Cortex-A9", -}; - struct arm_pmu { enum arm_perf_pmu_ids id; + const char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); void (*enable)(struct hw_perf_event *evt, int idx); void (*disable)(struct hw_perf_event *evt, int idx); - int (*event_map)(int evt); - u64 (*raw_event)(u64); int (*get_event_idx)(struct cpu_hw_events *cpuc, struct hw_perf_event *hwc); u32 (*read_counter)(int idx); void (*write_counter)(int idx, u32 val); void (*start)(void); void (*stop)(void); + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; + const unsigned (*event_map)[PERF_COUNT_HW_MAX]; + u32 raw_event_mask; int num_events; u64 max_period; }; @@ -136,10 +128,6 @@ EXPORT_SYMBOL_GPL(perf_num_counters); #define CACHE_OP_UNSUPPORTED 0xFFFF -static unsigned armpmu_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; - static int armpmu_map_cache_event(u64 config) { @@ -157,7 +145,7 @@ armpmu_map_cache_event(u64 config) if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) return -EINVAL; - ret = (int)armpmu_perf_cache_map[cache_type][cache_op][cache_result]; + ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result]; if (ret == CACHE_OP_UNSUPPORTED) return -ENOENT; @@ -166,6 +154,19 @@ armpmu_map_cache_event(u64 config) } static int +armpmu_map_event(u64 config) +{ + int mapping = (*armpmu->event_map)[config]; + return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping; +} + +static int +armpmu_map_raw_event(u64 config) +{ + return (int)(config & armpmu->raw_event_mask); +} + +static int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx) @@ -458,11 +459,11 @@ __hw_perf_event_init(struct perf_event *event) /* Decode the generic type into an ARM event identifier. */ if (PERF_TYPE_HARDWARE == event->attr.type) { - mapping = armpmu->event_map(event->attr.config); + mapping = armpmu_map_event(event->attr.config); } else if (PERF_TYPE_HW_CACHE == event->attr.type) { mapping = armpmu_map_cache_event(event->attr.config); } else if (PERF_TYPE_RAW == event->attr.type) { - mapping = armpmu->raw_event(event->attr.config); + mapping = armpmu_map_raw_event(event->attr.config); } else { pr_debug("event type %x not supported\n", event->attr.type); return -EOPNOTSUPP; @@ -603,2366 +604,10 @@ static struct pmu pmu = { .read = armpmu_read, }; -/* - * ARMv6 Performance counter handling code. - * - * ARMv6 has 2 configurable performance counters and a single cycle counter. - * They all share a single reset bit but can be written to zero so we can use - * that for a reset. - * - * The counters can't be individually enabled or disabled so when we remove - * one event and replace it with another we could get spurious counts from the - * wrong event. However, we can take advantage of the fact that the - * performance counters can export events to the event bus, and the event bus - * itself can be monitored. This requires that we *don't* export the events to - * the event bus. The procedure for disabling a configurable counter is: - * - change the counter to count the ETMEXTOUT[0] signal (0x20). This - * effectively stops the counter from counting. - * - disable the counter's interrupt generation (each counter has it's - * own interrupt enable bit). - * Once stopped, the counter value can be written as 0 to reset. - * - * To enable a counter: - * - enable the counter's interrupt generation. - * - set the new event type. - * - * Note: the dedicated cycle counter only counts cycles and can't be - * enabled/disabled independently of the others. When we want to disable the - * cycle counter, we have to just disable the interrupt reporting and start - * ignoring that counter. When re-enabling, we have to reset the value and - * enable the interrupt. - */ - -enum armv6_perf_types { - ARMV6_PERFCTR_ICACHE_MISS = 0x0, - ARMV6_PERFCTR_IBUF_STALL = 0x1, - ARMV6_PERFCTR_DDEP_STALL = 0x2, - ARMV6_PERFCTR_ITLB_MISS = 0x3, - ARMV6_PERFCTR_DTLB_MISS = 0x4, - ARMV6_PERFCTR_BR_EXEC = 0x5, - ARMV6_PERFCTR_BR_MISPREDICT = 0x6, - ARMV6_PERFCTR_INSTR_EXEC = 0x7, - ARMV6_PERFCTR_DCACHE_HIT = 0x9, - ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, - ARMV6_PERFCTR_DCACHE_MISS = 0xB, - ARMV6_PERFCTR_DCACHE_WBACK = 0xC, - ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, - ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, - ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, - ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, - ARMV6_PERFCTR_WBUF_DRAINED = 0x12, - ARMV6_PERFCTR_CPU_CYCLES = 0xFF, - ARMV6_PERFCTR_NOP = 0x20, -}; - -enum armv6_counters { - ARMV6_CYCLE_COUNTER = 1, - ARMV6_COUNTER0, - ARMV6_COUNTER1, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -enum armv6mpcore_perf_types { - ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, - ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, - ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, - ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, - ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, - ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, - ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, - ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, - ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, - ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, - ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, - ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, - ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, - ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, - ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, - ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, -}; - -/* - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -static inline unsigned long -armv6_pmcr_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); - return val; -} - -static inline void -armv6_pmcr_write(unsigned long val) -{ - asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); -} - -#define ARMV6_PMCR_ENABLE (1 << 0) -#define ARMV6_PMCR_CTR01_RESET (1 << 1) -#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) -#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) -#define ARMV6_PMCR_COUNT0_IEN (1 << 4) -#define ARMV6_PMCR_COUNT1_IEN (1 << 5) -#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) -#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) -#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) -#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) -#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 -#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) -#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 -#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) - -#define ARMV6_PMCR_OVERFLOWED_MASK \ - (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ - ARMV6_PMCR_CCOUNT_OVERFLOW) - -static inline int -armv6_pmcr_has_overflowed(unsigned long pmcr) -{ - return (pmcr & ARMV6_PMCR_OVERFLOWED_MASK); -} - -static inline int -armv6_pmcr_counter_has_overflowed(unsigned long pmcr, - enum armv6_counters counter) -{ - int ret = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; - else if (ARMV6_COUNTER0 == counter) - ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; - else if (ARMV6_COUNTER1 == counter) - ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return ret; -} - -static inline u32 -armv6pmu_read_counter(int counter) -{ - unsigned long value = 0; - - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - - return value; -} - -static inline void -armv6pmu_write_counter(int counter, - u32 value) -{ - if (ARMV6_CYCLE_COUNTER == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); - else if (ARMV6_COUNTER0 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); - else if (ARMV6_COUNTER1 == counter) - asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); - else - WARN_ONCE(1, "invalid counter number (%d)\n", counter); -} - -void -armv6pmu_enable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = 0; - evt = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_EVT_COUNT0_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | - ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_EVT_COUNT1_MASK; - evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | - ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the event - * that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t -armv6pmu_handle_irq(int irq_num, - void *dev) -{ - unsigned long pmcr = armv6_pmcr_read(); - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - if (!armv6_pmcr_has_overflowed(pmcr)) - return IRQ_NONE; - - regs = get_irq_regs(); - - /* - * The interrupts are cleared by writing the overflow flags back to - * the control register. All of the other bits don't have any effect - * if they are rewritten, so write the whole value back. - */ - armv6_pmcr_write(pmcr); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void -armv6pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val |= ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -void -armv6pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~ARMV6_PMCR_ENABLE; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline int -armv6pmu_event_map(int config) -{ - int mapping = armv6_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static inline int -armv6mpcore_pmu_event_map(int config) -{ - int mapping = armv6mpcore_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 -armv6pmu_raw_event(u64 config) -{ - return config & 0xff; -} - -static int -armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - /* Always place a cycle counter into the cycle counter. */ - if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { - if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV6_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * counter0 and counter1. - */ - if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) { - return ARMV6_COUNTER1; - } - - if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) { - return ARMV6_COUNTER0; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static void -armv6pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, evt, flags; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - evt = 0; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; - evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Mask out the current event and set the counter to count the number - * of ETM bus signal assertion cycles. The external reporting should - * be disabled and so this should never increment. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, - int idx) -{ - unsigned long val, mask, flags, evt = 0; - - if (ARMV6_CYCLE_COUNTER == idx) { - mask = ARMV6_PMCR_CCOUNT_IEN; - } else if (ARMV6_COUNTER0 == idx) { - mask = ARMV6_PMCR_COUNT0_IEN; - } else if (ARMV6_COUNTER1 == idx) { - mask = ARMV6_PMCR_COUNT1_IEN; - } else { - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - /* - * Unlike UP ARMv6, we don't have a way of stopping the counters. We - * simply disable the interrupt reporting. - */ - spin_lock_irqsave(&pmu_lock, flags); - val = armv6_pmcr_read(); - val &= ~mask; - val |= evt; - armv6_pmcr_write(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static const struct arm_pmu armv6pmu = { - .id = ARM_PERF_PMU_ID_V6, - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6pmu_disable_event, - .event_map = armv6pmu_event_map, - .raw_event = armv6pmu_raw_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -/* - * ARMv6mpcore is almost identical to single core ARMv6 with the exception - * that some of the events have different enumerations and that there is no - * *hack* to stop the programmable counters. To stop the counters we simply - * disable the interrupt reporting and update the event. When unthrottling we - * reset the period and enable the interrupt reporting. - */ -static const struct arm_pmu armv6mpcore_pmu = { - .id = ARM_PERF_PMU_ID_V6MP, - .handle_irq = armv6pmu_handle_irq, - .enable = armv6pmu_enable_event, - .disable = armv6mpcore_pmu_disable_event, - .event_map = armv6mpcore_pmu_event_map, - .raw_event = armv6pmu_raw_event, - .read_counter = armv6pmu_read_counter, - .write_counter = armv6pmu_write_counter, - .get_event_idx = armv6pmu_get_event_idx, - .start = armv6pmu_start, - .stop = armv6pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -/* - * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. - * - * Copied from ARMv6 code, with the low level code inspired - * by the ARMv7 Oprofile code. - * - * Cortex-A8 has up to 4 configurable performance counters and - * a single cycle counter. - * Cortex-A9 has up to 31 configurable performance counters and - * a single cycle counter. - * - * All counters can be enabled/disabled and IRQ masked separately. The cycle - * counter and all 4 performance counters together can be reset separately. - */ - -/* Common ARMv7 event types */ -enum armv7_perf_types { - ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, - ARMV7_PERFCTR_IFETCH_MISS = 0x01, - ARMV7_PERFCTR_ITLB_MISS = 0x02, - ARMV7_PERFCTR_DCACHE_REFILL = 0x03, - ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, - ARMV7_PERFCTR_DTLB_REFILL = 0x05, - ARMV7_PERFCTR_DREAD = 0x06, - ARMV7_PERFCTR_DWRITE = 0x07, - - ARMV7_PERFCTR_EXC_TAKEN = 0x09, - ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, - ARMV7_PERFCTR_CID_WRITE = 0x0B, - /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. - * It counts: - * - all branch instructions, - * - instructions that explicitly write the PC, - * - exception generating instructions. - */ - ARMV7_PERFCTR_PC_WRITE = 0x0C, - ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, - ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, - ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, - ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - - ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, - - ARMV7_PERFCTR_CPU_CYCLES = 0xFF -}; - -/* ARMv7 Cortex-A8 specific event types */ -enum armv7_a8_perf_types { - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - - ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, - ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, - ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, - ARMV7_PERFCTR_L2_ACCESS = 0x43, - ARMV7_PERFCTR_L2_CACH_MISS = 0x44, - ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, - ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, - ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, - ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, - ARMV7_PERFCTR_L1_DATA_MISS = 0x49, - ARMV7_PERFCTR_L1_INST_MISS = 0x4A, - ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, - ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, - ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, - ARMV7_PERFCTR_L2_NEON = 0x4E, - ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, - ARMV7_PERFCTR_L1_INST = 0x50, - ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, - ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, - ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, - ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, - ARMV7_PERFCTR_OP_EXECUTED = 0x55, - ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, - ARMV7_PERFCTR_CYCLES_INST = 0x57, - ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, - ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, - ARMV7_PERFCTR_NEON_CYCLES = 0x5A, - - ARMV7_PERFCTR_PMU0_EVENTS = 0x70, - ARMV7_PERFCTR_PMU1_EVENTS = 0x71, - ARMV7_PERFCTR_PMU_EVENTS = 0x72, -}; - -/* ARMv7 Cortex-A9 specific event types */ -enum armv7_a9_perf_types { - ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, - ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, - ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, - - ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, - ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, - - ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, - ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, - ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, - ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, - ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, - ARMV7_PERFCTR_DATA_EVICTION = 0x65, - ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, - ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, - - ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, - - ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, - ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, - ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, - ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, - ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, - - ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, - ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, - ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, - ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, - ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, - ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, - ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, - - ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, - ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, - - ARMV7_PERFCTR_ISB_INST = 0x90, - ARMV7_PERFCTR_DSB_INST = 0x91, - ARMV7_PERFCTR_DMB_INST = 0x92, - ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, - - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, - ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, - ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, - ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, - ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, - ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 -}; - -/* - * Cortex-A8 HW events mapping - * - * The hardware events that we support. We do support cache operations but - * we have harvard caches and no way to combine instruction and data - * accesses/misses in hardware. - */ -static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Cortex-A9 HW events mapping - */ -static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, - [PERF_COUNT_HW_INSTRUCTIONS] = - ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, - [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, - [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, - [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, -}; - -static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, - [C(RESULT_MISS)] - = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -/* - * Perf Events counters - */ -enum armv7_counters { - ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ - ARMV7_COUNTER0 = 2, /* First event counter */ -}; - -/* - * The cycle counter is ARMV7_CYCLE_COUNTER. - * The first event counter is ARMV7_COUNTER0. - * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). - */ -#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) - -/* - * ARMv7 low level PMNC access - */ - -/* - * Per-CPU PMNC: config reg - */ -#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ -#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ -#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ -#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ -#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ -#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ -#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ -#define ARMV7_PMNC_N_MASK 0x1f -#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ - -/* - * Available counters - */ -#define ARMV7_CNT0 0 /* First event counter */ -#define ARMV7_CCNT 31 /* Cycle counter */ - -/* Perf Event to low level counters mapping */ -#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) - -/* - * CNTENS: counters enable reg - */ -#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) - -/* - * CNTENC: counters disable reg - */ -#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) - -/* - * INTENS: counters overflow interrupt enable reg - */ -#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENS_C (1 << ARMV7_CCNT) - -/* - * INTENC: counters overflow interrupt disable reg - */ -#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_INTENC_C (1 << ARMV7_CCNT) - -/* - * EVTSEL: Event selection reg - */ -#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ - -/* - * SELECT: Counter selection reg - */ -#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ - -/* - * FLAG: counters overflow flag status reg - */ -#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) -#define ARMV7_FLAG_C (1 << ARMV7_CCNT) -#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ -#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK - -static inline unsigned long armv7_pmnc_read(void) -{ - u32 val; - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); - return val; -} - -static inline void armv7_pmnc_write(unsigned long val) -{ - val &= ARMV7_PMNC_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); -} - -static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) -{ - return pmnc & ARMV7_OVERFLOWED_MASK; -} - -static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, - enum armv7_counters counter) -{ - int ret = 0; - - if (counter == ARMV7_CYCLE_COUNTER) - ret = pmnc & ARMV7_FLAG_C; - else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) - ret = pmnc & ARMV7_FLAG_P(counter); - else - pr_err("CPU%u checking wrong counter %d overflow status\n", - smp_processor_id(), counter); - - return ret; -} - -static inline int armv7_pmnc_select_counter(unsigned int idx) -{ - u32 val; - - if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { - pr_err("CPU%u selecting wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); - - return idx; -} - -static inline u32 armv7pmu_read_counter(int idx) -{ - unsigned long value = 0; - - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mrc p15, 0, %0, c9, c13, 2" - : "=r" (value)); - } else - pr_err("CPU%u reading wrong counter %d\n", - smp_processor_id(), idx); - - return value; -} - -static inline void armv7pmu_write_counter(int idx, u32 value) -{ - if (idx == ARMV7_CYCLE_COUNTER) - asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); - else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { - if (armv7_pmnc_select_counter(idx) == idx) - asm volatile("mcr p15, 0, %0, c9, c13, 2" - : : "r" (value)); - } else - pr_err("CPU%u writing wrong counter %d\n", - smp_processor_id(), idx); -} - -static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) -{ - if (armv7_pmnc_select_counter(idx) == idx) { - val &= ARMV7_EVTSEL_MASK; - asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); - } -} - -static inline u32 armv7_pmnc_enable_counter(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENS_C; - else - val = ARMV7_CNTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_counter(unsigned int idx) -{ - u32 val; - - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_CNTENC_C; - else - val = ARMV7_CNTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_enable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u enabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENS_C; - else - val = ARMV7_INTENS_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_disable_intens(unsigned int idx) -{ - u32 val; - - if ((idx != ARMV7_CYCLE_COUNTER) && - ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { - pr_err("CPU%u disabling wrong PMNC counter" - " interrupt enable %d\n", smp_processor_id(), idx); - return -1; - } - - if (idx == ARMV7_CYCLE_COUNTER) - val = ARMV7_INTENC_C; - else - val = ARMV7_INTENC_P(idx); - - asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); - - return idx; -} - -static inline u32 armv7_pmnc_getreset_flags(void) -{ - u32 val; - - /* Read */ - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - - /* Write to clear flags */ - val &= ARMV7_FLAG_MASK; - asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); - - return val; -} - -#ifdef DEBUG -static void armv7_pmnc_dump_regs(void) -{ - u32 val; - unsigned int cnt; - - printk(KERN_INFO "PMNC registers dump:\n"); - - asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); - printk(KERN_INFO "PMNC =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); - printk(KERN_INFO "CNTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); - printk(KERN_INFO "INTENS=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); - printk(KERN_INFO "FLAGS =0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); - printk(KERN_INFO "SELECT=0x%08x\n", val); - - asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); - printk(KERN_INFO "CCNT =0x%08x\n", val); - - for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { - armv7_pmnc_select_counter(cnt); - asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); - printk(KERN_INFO "CNT[%d] count =0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); - printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", - cnt-ARMV7_EVENT_CNT_TO_CNTx, val); - } -} -#endif - -void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Enable counter and interrupt, and set the counter to count - * the event that we're interested in. - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Set event (if destined for PMNx counters) - * We don't need to set the event if it's a cycle count - */ - if (idx != ARMV7_CYCLE_COUNTER) - armv7_pmnc_write_evtsel(idx, hwc->config_base); - - /* - * Enable interrupt for this counter - */ - armv7_pmnc_enable_intens(idx); - - /* - * Enable counter - */ - armv7_pmnc_enable_counter(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags; - - /* - * Disable counter and interrupt - */ - spin_lock_irqsave(&pmu_lock, flags); - - /* - * Disable counter - */ - armv7_pmnc_disable_counter(idx); - - /* - * Disable interrupt for this counter - */ - armv7_pmnc_disable_intens(idx); - - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * Get and reset the IRQ flags - */ - pmnc = armv7_pmnc_getreset_flags(); - - /* - * Did an overflow occur? - */ - if (!armv7_pmnc_has_overflowed(pmnc)) - return IRQ_NONE; - - /* - * Handle the counter(s) overflow(s) - */ - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - /* - * We have a single interrupt for all counters. Check that - * each counter has overflowed before we process it. - */ - if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - /* - * Handle the pending perf events. - * - * Note: this call *must* be run with interrupts disabled. For - * platforms that can have the PMU interrupts raised as an NMI, this - * will not work. - */ - irq_work_run(); - - return IRQ_HANDLED; -} - -static void armv7pmu_start(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Enable all counters */ - armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void armv7pmu_stop(void) -{ - unsigned long flags; - - spin_lock_irqsave(&pmu_lock, flags); - /* Disable all counters */ - armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline int armv7_a8_pmu_event_map(int config) -{ - int mapping = armv7_a8_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static inline int armv7_a9_pmu_event_map(int config) -{ - int mapping = armv7_a9_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 armv7pmu_raw_event(u64 config) -{ - return config & 0xff; -} - -static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx; - - /* Always place a cycle counter into the cycle counter. */ - if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { - if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return ARMV7_CYCLE_COUNTER; - } else { - /* - * For anything other than a cycle counter, try and use - * the events counters - */ - for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { - if (!test_and_set_bit(idx, cpuc->used_mask)) - return idx; - } - - /* The counters are all in use. */ - return -EAGAIN; - } -} - -static struct arm_pmu armv7pmu = { - .handle_irq = armv7pmu_handle_irq, - .enable = armv7pmu_enable_event, - .disable = armv7pmu_disable_event, - .raw_event = armv7pmu_raw_event, - .read_counter = armv7pmu_read_counter, - .write_counter = armv7pmu_write_counter, - .get_event_idx = armv7pmu_get_event_idx, - .start = armv7pmu_start, - .stop = armv7pmu_stop, - .max_period = (1LLU << 32) - 1, -}; - -static u32 __init armv7_reset_read_pmnc(void) -{ - u32 nb_cnt; - - /* Initialize & Reset PMNC: C and P bits */ - armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); - - /* Read the nb of CNTx counters supported from PMNC */ - nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; - - /* Add the CPU cycles counter and return */ - return nb_cnt + 1; -} - -/* - * ARMv5 [xscale] Performance counter handling code. - * - * Based on xscale OProfile code. - * - * There are two variants of the xscale PMU that we support: - * - xscale1pmu: 2 event counters and a cycle counter - * - xscale2pmu: 4 event counters and a cycle counter - * The two variants share event definitions, but have different - * PMU structures. - */ - -enum xscale_perf_types { - XSCALE_PERFCTR_ICACHE_MISS = 0x00, - XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, - XSCALE_PERFCTR_DATA_STALL = 0x02, - XSCALE_PERFCTR_ITLB_MISS = 0x03, - XSCALE_PERFCTR_DTLB_MISS = 0x04, - XSCALE_PERFCTR_BRANCH = 0x05, - XSCALE_PERFCTR_BRANCH_MISS = 0x06, - XSCALE_PERFCTR_INSTRUCTION = 0x07, - XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, - XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, - XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, - XSCALE_PERFCTR_DCACHE_MISS = 0x0B, - XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, - XSCALE_PERFCTR_PC_CHANGED = 0x0D, - XSCALE_PERFCTR_BCU_REQUEST = 0x10, - XSCALE_PERFCTR_BCU_FULL = 0x11, - XSCALE_PERFCTR_BCU_DRAIN = 0x12, - XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, - XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, - XSCALE_PERFCTR_RMW = 0x16, - /* XSCALE_PERFCTR_CCNT is not hardware defined */ - XSCALE_PERFCTR_CCNT = 0xFE, - XSCALE_PERFCTR_UNUSED = 0xFF, -}; - -enum xscale_counters { - XSCALE_CYCLE_COUNTER = 1, - XSCALE_COUNTER0, - XSCALE_COUNTER1, - XSCALE_COUNTER2, - XSCALE_COUNTER3, -}; - -static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { - [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, - [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, - [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, -}; - -static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, -}; - -#define XSCALE_PMU_ENABLE 0x001 -#define XSCALE_PMN_RESET 0x002 -#define XSCALE_CCNT_RESET 0x004 -#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) -#define XSCALE_PMU_CNT64 0x008 - -static inline int -xscalepmu_event_map(int config) -{ - int mapping = xscale_perf_map[config]; - if (HW_OP_UNSUPPORTED == mapping) - mapping = -EOPNOTSUPP; - return mapping; -} - -static u64 -xscalepmu_raw_event(u64 config) -{ - return config & 0xff; -} - -#define XSCALE1_OVERFLOWED_MASK 0x700 -#define XSCALE1_CCOUNT_OVERFLOW 0x400 -#define XSCALE1_COUNT0_OVERFLOW 0x100 -#define XSCALE1_COUNT1_OVERFLOW 0x200 -#define XSCALE1_CCOUNT_INT_EN 0x040 -#define XSCALE1_COUNT0_INT_EN 0x010 -#define XSCALE1_COUNT1_INT_EN 0x020 -#define XSCALE1_COUNT0_EVT_SHFT 12 -#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) -#define XSCALE1_COUNT1_EVT_SHFT 20 -#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) - -static inline u32 -xscale1pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); - return val; -} - -static inline void -xscale1pmu_write_pmnc(u32 val) -{ - /* upper 4bits and 7, 11 are write-as-0 */ - val &= 0xffff77f; - asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); -} - -static inline int -xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = pmnc & XSCALE1_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = pmnc & XSCALE1_COUNT1_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale1pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* - * NOTE: there's an A stepping erratum that states if an overflow - * bit already exists and another occurs, the previous - * Overflow bit gets cleared. There's no workaround. - * Fixed in B stepping or later. - */ - pmnc = xscale1pmu_read_pmnc(); - - /* - * Write the value back to clear the overflow flags. Overflow - * flags remain in pmnc for use below. We also disable the PMU - * while we process the interrupt. - */ - xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) - return IRQ_NONE; - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = 0; - evt = XSCALE1_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | - XSCALE1_COUNT0_INT_EN; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_EVT_MASK; - evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | - XSCALE1_COUNT1_INT_EN; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long val, mask, evt, flags; - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - mask = XSCALE1_CCOUNT_INT_EN; - evt = 0; - break; - case XSCALE_COUNTER0: - mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; - evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~mask; - val |= evt; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - if (XSCALE_PERFCTR_CCNT == event->config_base) { - if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) - return -EAGAIN; - - return XSCALE_CYCLE_COUNTER; - } else { - if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) { - return XSCALE_COUNTER1; - } - - if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) { - return XSCALE_COUNTER0; - } - - return -EAGAIN; - } -} - -static void -xscale1pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val |= XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale1pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale1pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale1pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale1pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale1pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale1pmu = { - .id = ARM_PERF_PMU_ID_XSCALE1, - .handle_irq = xscale1pmu_handle_irq, - .enable = xscale1pmu_enable_event, - .disable = xscale1pmu_disable_event, - .event_map = xscalepmu_event_map, - .raw_event = xscalepmu_raw_event, - .read_counter = xscale1pmu_read_counter, - .write_counter = xscale1pmu_write_counter, - .get_event_idx = xscale1pmu_get_event_idx, - .start = xscale1pmu_start, - .stop = xscale1pmu_stop, - .num_events = 3, - .max_period = (1LLU << 32) - 1, -}; - -#define XSCALE2_OVERFLOWED_MASK 0x01f -#define XSCALE2_CCOUNT_OVERFLOW 0x001 -#define XSCALE2_COUNT0_OVERFLOW 0x002 -#define XSCALE2_COUNT1_OVERFLOW 0x004 -#define XSCALE2_COUNT2_OVERFLOW 0x008 -#define XSCALE2_COUNT3_OVERFLOW 0x010 -#define XSCALE2_CCOUNT_INT_EN 0x001 -#define XSCALE2_COUNT0_INT_EN 0x002 -#define XSCALE2_COUNT1_INT_EN 0x004 -#define XSCALE2_COUNT2_INT_EN 0x008 -#define XSCALE2_COUNT3_INT_EN 0x010 -#define XSCALE2_COUNT0_EVT_SHFT 0 -#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) -#define XSCALE2_COUNT1_EVT_SHFT 8 -#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) -#define XSCALE2_COUNT2_EVT_SHFT 16 -#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) -#define XSCALE2_COUNT3_EVT_SHFT 24 -#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) - -static inline u32 -xscale2pmu_read_pmnc(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); - /* bits 1-2 and 4-23 are read-unpredictable */ - return val & 0xff000009; -} - -static inline void -xscale2pmu_write_pmnc(u32 val) -{ - /* bits 4-23 are write-as-0, 24-31 are write ignored */ - val &= 0xf; - asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_overflow_flags(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_overflow_flags(u32 val) -{ - asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); -} - -static inline u32 -xscale2pmu_read_event_select(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); - return val; -} - -static inline void -xscale2pmu_write_event_select(u32 val) -{ - asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); -} - -static inline u32 -xscale2pmu_read_int_enable(void) -{ - u32 val; - asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); - return val; -} - -static void -xscale2pmu_write_int_enable(u32 val) -{ - asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); -} - -static inline int -xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, - enum xscale_counters counter) -{ - int ret = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; - break; - case XSCALE_COUNTER0: - ret = of_flags & XSCALE2_COUNT0_OVERFLOW; - break; - case XSCALE_COUNTER1: - ret = of_flags & XSCALE2_COUNT1_OVERFLOW; - break; - case XSCALE_COUNTER2: - ret = of_flags & XSCALE2_COUNT2_OVERFLOW; - break; - case XSCALE_COUNTER3: - ret = of_flags & XSCALE2_COUNT3_OVERFLOW; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", counter); - } - - return ret; -} - -static irqreturn_t -xscale2pmu_handle_irq(int irq_num, void *dev) -{ - unsigned long pmnc, of_flags; - struct perf_sample_data data; - struct cpu_hw_events *cpuc; - struct pt_regs *regs; - int idx; - - /* Disable the PMU. */ - pmnc = xscale2pmu_read_pmnc(); - xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); - - /* Check the overflow flag register. */ - of_flags = xscale2pmu_read_overflow_flags(); - if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) - return IRQ_NONE; - - /* Clear the overflow bits. */ - xscale2pmu_write_overflow_flags(of_flags); - - regs = get_irq_regs(); - - perf_sample_data_init(&data, 0); - - cpuc = &__get_cpu_var(cpu_hw_events); - for (idx = 0; idx <= armpmu->num_events; ++idx) { - struct perf_event *event = cpuc->events[idx]; - struct hw_perf_event *hwc; - - if (!test_bit(idx, cpuc->active_mask)) - continue; - - if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) - continue; - - hwc = &event->hw; - armpmu_event_update(event, hwc, idx); - data.period = event->hw.last_period; - if (!armpmu_event_set_period(event, hwc, idx)) - continue; - - if (perf_event_overflow(event, 0, &data, regs)) - armpmu->disable(hwc, idx); - } - - irq_work_run(); - - /* - * Re-enable the PMU. - */ - pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(pmnc); - - return IRQ_HANDLED; -} - -static void -xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien |= XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien |= XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien |= XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien |= XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien |= XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) -{ - unsigned long flags, ien, evtsel; - - ien = xscale2pmu_read_int_enable(); - evtsel = xscale2pmu_read_event_select(); - - switch (idx) { - case XSCALE_CYCLE_COUNTER: - ien &= ~XSCALE2_CCOUNT_INT_EN; - break; - case XSCALE_COUNTER0: - ien &= ~XSCALE2_COUNT0_INT_EN; - evtsel &= ~XSCALE2_COUNT0_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; - break; - case XSCALE_COUNTER1: - ien &= ~XSCALE2_COUNT1_INT_EN; - evtsel &= ~XSCALE2_COUNT1_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; - break; - case XSCALE_COUNTER2: - ien &= ~XSCALE2_COUNT2_INT_EN; - evtsel &= ~XSCALE2_COUNT2_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; - break; - case XSCALE_COUNTER3: - ien &= ~XSCALE2_COUNT3_INT_EN; - evtsel &= ~XSCALE2_COUNT3_EVT_MASK; - evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; - break; - default: - WARN_ONCE(1, "invalid counter number (%d)\n", idx); - return; - } - - spin_lock_irqsave(&pmu_lock, flags); - xscale2pmu_write_event_select(evtsel); - xscale2pmu_write_int_enable(ien); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static int -xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, - struct hw_perf_event *event) -{ - int idx = xscale1pmu_get_event_idx(cpuc, event); - if (idx >= 0) - goto out; - - if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) - idx = XSCALE_COUNTER3; - else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) - idx = XSCALE_COUNTER2; -out: - return idx; -} - -static void -xscale2pmu_start(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; - val |= XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static void -xscale2pmu_stop(void) -{ - unsigned long flags, val; - - spin_lock_irqsave(&pmu_lock, flags); - val = xscale2pmu_read_pmnc(); - val &= ~XSCALE_PMU_ENABLE; - xscale2pmu_write_pmnc(val); - spin_unlock_irqrestore(&pmu_lock, flags); -} - -static inline u32 -xscale2pmu_read_counter(int counter) -{ - u32 val = 0; - - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); - break; - } - - return val; -} - -static inline void -xscale2pmu_write_counter(int counter, u32 val) -{ - switch (counter) { - case XSCALE_CYCLE_COUNTER: - asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); - break; - case XSCALE_COUNTER0: - asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER1: - asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER2: - asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); - break; - case XSCALE_COUNTER3: - asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); - break; - } -} - -static const struct arm_pmu xscale2pmu = { - .id = ARM_PERF_PMU_ID_XSCALE2, - .handle_irq = xscale2pmu_handle_irq, - .enable = xscale2pmu_enable_event, - .disable = xscale2pmu_disable_event, - .event_map = xscalepmu_event_map, - .raw_event = xscalepmu_raw_event, - .read_counter = xscale2pmu_read_counter, - .write_counter = xscale2pmu_write_counter, - .get_event_idx = xscale2pmu_get_event_idx, - .start = xscale2pmu_start, - .stop = xscale2pmu_stop, - .num_events = 5, - .max_period = (1LLU << 32) - 1, -}; +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" static int __init init_hw_perf_events(void) @@ -2977,37 +622,16 @@ init_hw_perf_events(void) case 0xB360: /* ARM1136 */ case 0xB560: /* ARM1156 */ case 0xB760: /* ARM1176 */ - armpmu = &armv6pmu; - memcpy(armpmu_perf_cache_map, armv6_perf_cache_map, - sizeof(armv6_perf_cache_map)); + armpmu = armv6pmu_init(); break; case 0xB020: /* ARM11mpcore */ - armpmu = &armv6mpcore_pmu; - memcpy(armpmu_perf_cache_map, - armv6mpcore_perf_cache_map, - sizeof(armv6mpcore_perf_cache_map)); + armpmu = armv6mpcore_pmu_init(); break; case 0xC080: /* Cortex-A8 */ - armv7pmu.id = ARM_PERF_PMU_ID_CA8; - memcpy(armpmu_perf_cache_map, armv7_a8_perf_cache_map, - sizeof(armv7_a8_perf_cache_map)); - armv7pmu.event_map = armv7_a8_pmu_event_map; - armpmu = &armv7pmu; - - /* Reset PMNC and read the nb of CNTx counters - supported */ - armv7pmu.num_events = armv7_reset_read_pmnc(); + armpmu = armv7_a8_pmu_init(); break; case 0xC090: /* Cortex-A9 */ - armv7pmu.id = ARM_PERF_PMU_ID_CA9; - memcpy(armpmu_perf_cache_map, armv7_a9_perf_cache_map, - sizeof(armv7_a9_perf_cache_map)); - armv7pmu.event_map = armv7_a9_pmu_event_map; - armpmu = &armv7pmu; - - /* Reset PMNC and read the nb of CNTx counters - supported */ - armv7pmu.num_events = armv7_reset_read_pmnc(); + armpmu = armv7_a9_pmu_init(); break; } /* Intel CPUs [xscale]. */ @@ -3015,21 +639,17 @@ init_hw_perf_events(void) part_number = (cpuid >> 13) & 0x7; switch (part_number) { case 1: - armpmu = &xscale1pmu; - memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, - sizeof(xscale_perf_cache_map)); + armpmu = xscale1pmu_init(); break; case 2: - armpmu = &xscale2pmu; - memcpy(armpmu_perf_cache_map, xscale_perf_cache_map, - sizeof(xscale_perf_cache_map)); + armpmu = xscale2pmu_init(); break; } } if (armpmu) { pr_info("enabled with %s PMU driver, %d counters available\n", - arm_pmu_names[armpmu->id], armpmu->num_events); + armpmu->name, armpmu->num_events); } else { pr_info("no hardware support available\n"); } diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c new file mode 100644 index 00000000000..7aeb07da907 --- /dev/null +++ b/arch/arm/kernel/perf_event_v6.c @@ -0,0 +1,672 @@ +/* + * ARMv6 Performance counter handling code. + * + * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles + * + * ARMv6 has 2 configurable performance counters and a single cycle counter. + * They all share a single reset bit but can be written to zero so we can use + * that for a reset. + * + * The counters can't be individually enabled or disabled so when we remove + * one event and replace it with another we could get spurious counts from the + * wrong event. However, we can take advantage of the fact that the + * performance counters can export events to the event bus, and the event bus + * itself can be monitored. This requires that we *don't* export the events to + * the event bus. The procedure for disabling a configurable counter is: + * - change the counter to count the ETMEXTOUT[0] signal (0x20). This + * effectively stops the counter from counting. + * - disable the counter's interrupt generation (each counter has it's + * own interrupt enable bit). + * Once stopped, the counter value can be written as 0 to reset. + * + * To enable a counter: + * - enable the counter's interrupt generation. + * - set the new event type. + * + * Note: the dedicated cycle counter only counts cycles and can't be + * enabled/disabled independently of the others. When we want to disable the + * cycle counter, we have to just disable the interrupt reporting and start + * ignoring that counter. When re-enabling, we have to reset the value and + * enable the interrupt. + */ + +#ifdef CONFIG_CPU_V6 +enum armv6_perf_types { + ARMV6_PERFCTR_ICACHE_MISS = 0x0, + ARMV6_PERFCTR_IBUF_STALL = 0x1, + ARMV6_PERFCTR_DDEP_STALL = 0x2, + ARMV6_PERFCTR_ITLB_MISS = 0x3, + ARMV6_PERFCTR_DTLB_MISS = 0x4, + ARMV6_PERFCTR_BR_EXEC = 0x5, + ARMV6_PERFCTR_BR_MISPREDICT = 0x6, + ARMV6_PERFCTR_INSTR_EXEC = 0x7, + ARMV6_PERFCTR_DCACHE_HIT = 0x9, + ARMV6_PERFCTR_DCACHE_ACCESS = 0xA, + ARMV6_PERFCTR_DCACHE_MISS = 0xB, + ARMV6_PERFCTR_DCACHE_WBACK = 0xC, + ARMV6_PERFCTR_SW_PC_CHANGE = 0xD, + ARMV6_PERFCTR_MAIN_TLB_MISS = 0xF, + ARMV6_PERFCTR_EXPL_D_ACCESS = 0x10, + ARMV6_PERFCTR_LSU_FULL_STALL = 0x11, + ARMV6_PERFCTR_WBUF_DRAINED = 0x12, + ARMV6_PERFCTR_CPU_CYCLES = 0xFF, + ARMV6_PERFCTR_NOP = 0x20, +}; + +enum armv6_counters { + ARMV6_CYCLE_COUNTER = 1, + ARMV6_COUNTER0, + ARMV6_COUNTER1, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +enum armv6mpcore_perf_types { + ARMV6MPCORE_PERFCTR_ICACHE_MISS = 0x0, + ARMV6MPCORE_PERFCTR_IBUF_STALL = 0x1, + ARMV6MPCORE_PERFCTR_DDEP_STALL = 0x2, + ARMV6MPCORE_PERFCTR_ITLB_MISS = 0x3, + ARMV6MPCORE_PERFCTR_DTLB_MISS = 0x4, + ARMV6MPCORE_PERFCTR_BR_EXEC = 0x5, + ARMV6MPCORE_PERFCTR_BR_NOTPREDICT = 0x6, + ARMV6MPCORE_PERFCTR_BR_MISPREDICT = 0x7, + ARMV6MPCORE_PERFCTR_INSTR_EXEC = 0x8, + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS = 0xA, + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS = 0xB, + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS = 0xC, + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS = 0xD, + ARMV6MPCORE_PERFCTR_DCACHE_EVICTION = 0xE, + ARMV6MPCORE_PERFCTR_SW_PC_CHANGE = 0xF, + ARMV6MPCORE_PERFCTR_MAIN_TLB_MISS = 0x10, + ARMV6MPCORE_PERFCTR_EXPL_MEM_ACCESS = 0x11, + ARMV6MPCORE_PERFCTR_LSU_FULL_STALL = 0x12, + ARMV6MPCORE_PERFCTR_WBUF_DRAINED = 0x13, + ARMV6MPCORE_PERFCTR_CPU_CYCLES = 0xFF, +}; + +/* + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, + [C(RESULT_MISS)] = + ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * The ARM performance counters can count micro DTLB misses, + * micro ITLB misses and main TLB misses. There isn't an event + * for TLB misses, so use the micro misses here and if users + * want the main TLB misses they can use a raw counter. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +static inline unsigned long +armv6_pmcr_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c15, c12, 0" : "=r"(val)); + return val; +} + +static inline void +armv6_pmcr_write(unsigned long val) +{ + asm volatile("mcr p15, 0, %0, c15, c12, 0" : : "r"(val)); +} + +#define ARMV6_PMCR_ENABLE (1 << 0) +#define ARMV6_PMCR_CTR01_RESET (1 << 1) +#define ARMV6_PMCR_CCOUNT_RESET (1 << 2) +#define ARMV6_PMCR_CCOUNT_DIV (1 << 3) +#define ARMV6_PMCR_COUNT0_IEN (1 << 4) +#define ARMV6_PMCR_COUNT1_IEN (1 << 5) +#define ARMV6_PMCR_CCOUNT_IEN (1 << 6) +#define ARMV6_PMCR_COUNT0_OVERFLOW (1 << 8) +#define ARMV6_PMCR_COUNT1_OVERFLOW (1 << 9) +#define ARMV6_PMCR_CCOUNT_OVERFLOW (1 << 10) +#define ARMV6_PMCR_EVT_COUNT0_SHIFT 20 +#define ARMV6_PMCR_EVT_COUNT0_MASK (0xFF << ARMV6_PMCR_EVT_COUNT0_SHIFT) +#define ARMV6_PMCR_EVT_COUNT1_SHIFT 12 +#define ARMV6_PMCR_EVT_COUNT1_MASK (0xFF << ARMV6_PMCR_EVT_COUNT1_SHIFT) + +#define ARMV6_PMCR_OVERFLOWED_MASK \ + (ARMV6_PMCR_COUNT0_OVERFLOW | ARMV6_PMCR_COUNT1_OVERFLOW | \ + ARMV6_PMCR_CCOUNT_OVERFLOW) + +static inline int +armv6_pmcr_has_overflowed(unsigned long pmcr) +{ + return pmcr & ARMV6_PMCR_OVERFLOWED_MASK; +} + +static inline int +armv6_pmcr_counter_has_overflowed(unsigned long pmcr, + enum armv6_counters counter) +{ + int ret = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + ret = pmcr & ARMV6_PMCR_CCOUNT_OVERFLOW; + else if (ARMV6_COUNTER0 == counter) + ret = pmcr & ARMV6_PMCR_COUNT0_OVERFLOW; + else if (ARMV6_COUNTER1 == counter) + ret = pmcr & ARMV6_PMCR_COUNT1_OVERFLOW; + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return ret; +} + +static inline u32 +armv6pmu_read_counter(int counter) +{ + unsigned long value = 0; + + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 1" : "=r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 2" : "=r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mrc p15, 0, %0, c15, c12, 3" : "=r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + + return value; +} + +static inline void +armv6pmu_write_counter(int counter, + u32 value) +{ + if (ARMV6_CYCLE_COUNTER == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 1" : : "r"(value)); + else if (ARMV6_COUNTER0 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 2" : : "r"(value)); + else if (ARMV6_COUNTER1 == counter) + asm volatile("mcr p15, 0, %0, c15, c12, 3" : : "r"(value)); + else + WARN_ONCE(1, "invalid counter number (%d)\n", counter); +} + +void +armv6pmu_enable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = 0; + evt = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_EVT_COUNT0_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT0_SHIFT) | + ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_EVT_COUNT1_MASK; + evt = (hwc->config_base << ARMV6_PMCR_EVT_COUNT1_SHIFT) | + ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the event + * that we're interested in. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t +armv6pmu_handle_irq(int irq_num, + void *dev) +{ + unsigned long pmcr = armv6_pmcr_read(); + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + if (!armv6_pmcr_has_overflowed(pmcr)) + return IRQ_NONE; + + regs = get_irq_regs(); + + /* + * The interrupts are cleared by writing the overflow flags back to + * the control register. All of the other bits don't have any effect + * if they are rewritten, so write the whole value back. + */ + armv6_pmcr_write(pmcr); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv6_pmcr_counter_has_overflowed(pmcr, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void +armv6pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val |= ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~ARMV6_PMCR_ENABLE; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +armv6pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + /* Always place a cycle counter into the cycle counter. */ + if (ARMV6_PERFCTR_CPU_CYCLES == event->config_base) { + if (test_and_set_bit(ARMV6_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV6_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * counter0 and counter1. + */ + if (!test_and_set_bit(ARMV6_COUNTER1, cpuc->used_mask)) + return ARMV6_COUNTER1; + + if (!test_and_set_bit(ARMV6_COUNTER0, cpuc->used_mask)) + return ARMV6_COUNTER0; + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static void +armv6pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, evt, flags; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + evt = 0; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN | ARMV6_PMCR_EVT_COUNT0_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT0_SHIFT; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN | ARMV6_PMCR_EVT_COUNT1_MASK; + evt = ARMV6_PERFCTR_NOP << ARMV6_PMCR_EVT_COUNT1_SHIFT; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Mask out the current event and set the counter to count the number + * of ETM bus signal assertion cycles. The external reporting should + * be disabled and so this should never increment. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, + int idx) +{ + unsigned long val, mask, flags, evt = 0; + + if (ARMV6_CYCLE_COUNTER == idx) { + mask = ARMV6_PMCR_CCOUNT_IEN; + } else if (ARMV6_COUNTER0 == idx) { + mask = ARMV6_PMCR_COUNT0_IEN; + } else if (ARMV6_COUNTER1 == idx) { + mask = ARMV6_PMCR_COUNT1_IEN; + } else { + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + /* + * Unlike UP ARMv6, we don't have a way of stopping the counters. We + * simply disable the interrupt reporting. + */ + spin_lock_irqsave(&pmu_lock, flags); + val = armv6_pmcr_read(); + val &= ~mask; + val |= evt; + armv6_pmcr_write(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static const struct arm_pmu armv6pmu = { + .id = ARM_PERF_PMU_ID_V6, + .name = "v6", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6_perf_cache_map, + .event_map = &armv6_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init armv6pmu_init(void) +{ + return &armv6pmu; +} + +/* + * ARMv6mpcore is almost identical to single core ARMv6 with the exception + * that some of the events have different enumerations and that there is no + * *hack* to stop the programmable counters. To stop the counters we simply + * disable the interrupt reporting and update the event. When unthrottling we + * reset the period and enable the interrupt reporting. + */ +static const struct arm_pmu armv6mpcore_pmu = { + .id = ARM_PERF_PMU_ID_V6MP, + .name = "v6mpcore", + .handle_irq = armv6pmu_handle_irq, + .enable = armv6pmu_enable_event, + .disable = armv6mpcore_pmu_disable_event, + .read_counter = armv6pmu_read_counter, + .write_counter = armv6pmu_write_counter, + .get_event_idx = armv6pmu_get_event_idx, + .start = armv6pmu_start, + .stop = armv6pmu_stop, + .cache_map = &armv6mpcore_perf_cache_map, + .event_map = &armv6mpcore_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return &armv6mpcore_pmu; +} +#else +const struct arm_pmu *__init armv6pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init armv6mpcore_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V6 */ diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c new file mode 100644 index 00000000000..4d0423969df --- /dev/null +++ b/arch/arm/kernel/perf_event_v7.c @@ -0,0 +1,906 @@ +/* + * ARMv7 Cortex-A8 and Cortex-A9 Performance Events handling code. + * + * ARMv7 support: Jean Pihet <jpihet@mvista.com> + * 2010 (c) MontaVista Software, LLC. + * + * Copied from ARMv6 code, with the low level code inspired + * by the ARMv7 Oprofile code. + * + * Cortex-A8 has up to 4 configurable performance counters and + * a single cycle counter. + * Cortex-A9 has up to 31 configurable performance counters and + * a single cycle counter. + * + * All counters can be enabled/disabled and IRQ masked separately. The cycle + * counter and all 4 performance counters together can be reset separately. + */ + +#ifdef CONFIG_CPU_V7 +/* Common ARMv7 event types */ +enum armv7_perf_types { + ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, + ARMV7_PERFCTR_IFETCH_MISS = 0x01, + ARMV7_PERFCTR_ITLB_MISS = 0x02, + ARMV7_PERFCTR_DCACHE_REFILL = 0x03, + ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, + ARMV7_PERFCTR_DTLB_REFILL = 0x05, + ARMV7_PERFCTR_DREAD = 0x06, + ARMV7_PERFCTR_DWRITE = 0x07, + + ARMV7_PERFCTR_EXC_TAKEN = 0x09, + ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, + ARMV7_PERFCTR_CID_WRITE = 0x0B, + /* ARMV7_PERFCTR_PC_WRITE is equivalent to HW_BRANCH_INSTRUCTIONS. + * It counts: + * - all branch instructions, + * - instructions that explicitly write the PC, + * - exception generating instructions. + */ + ARMV7_PERFCTR_PC_WRITE = 0x0C, + ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, + ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, + ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, + ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, + + ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, + + ARMV7_PERFCTR_CPU_CYCLES = 0xFF +}; + +/* ARMv7 Cortex-A8 specific event types */ +enum armv7_a8_perf_types { + ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, + + ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, + + ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, + ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, + ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, + ARMV7_PERFCTR_L2_ACCESS = 0x43, + ARMV7_PERFCTR_L2_CACH_MISS = 0x44, + ARMV7_PERFCTR_AXI_READ_CYCLES = 0x45, + ARMV7_PERFCTR_AXI_WRITE_CYCLES = 0x46, + ARMV7_PERFCTR_MEMORY_REPLAY = 0x47, + ARMV7_PERFCTR_UNALIGNED_ACCESS_REPLAY = 0x48, + ARMV7_PERFCTR_L1_DATA_MISS = 0x49, + ARMV7_PERFCTR_L1_INST_MISS = 0x4A, + ARMV7_PERFCTR_L1_DATA_COLORING = 0x4B, + ARMV7_PERFCTR_L1_NEON_DATA = 0x4C, + ARMV7_PERFCTR_L1_NEON_CACH_DATA = 0x4D, + ARMV7_PERFCTR_L2_NEON = 0x4E, + ARMV7_PERFCTR_L2_NEON_HIT = 0x4F, + ARMV7_PERFCTR_L1_INST = 0x50, + ARMV7_PERFCTR_PC_RETURN_MIS_PRED = 0x51, + ARMV7_PERFCTR_PC_BRANCH_FAILED = 0x52, + ARMV7_PERFCTR_PC_BRANCH_TAKEN = 0x53, + ARMV7_PERFCTR_PC_BRANCH_EXECUTED = 0x54, + ARMV7_PERFCTR_OP_EXECUTED = 0x55, + ARMV7_PERFCTR_CYCLES_INST_STALL = 0x56, + ARMV7_PERFCTR_CYCLES_INST = 0x57, + ARMV7_PERFCTR_CYCLES_NEON_DATA_STALL = 0x58, + ARMV7_PERFCTR_CYCLES_NEON_INST_STALL = 0x59, + ARMV7_PERFCTR_NEON_CYCLES = 0x5A, + + ARMV7_PERFCTR_PMU0_EVENTS = 0x70, + ARMV7_PERFCTR_PMU1_EVENTS = 0x71, + ARMV7_PERFCTR_PMU_EVENTS = 0x72, +}; + +/* ARMv7 Cortex-A9 specific event types */ +enum armv7_a9_perf_types { + ARMV7_PERFCTR_JAVA_HW_BYTECODE_EXEC = 0x40, + ARMV7_PERFCTR_JAVA_SW_BYTECODE_EXEC = 0x41, + ARMV7_PERFCTR_JAZELLE_BRANCH_EXEC = 0x42, + + ARMV7_PERFCTR_COHERENT_LINE_MISS = 0x50, + ARMV7_PERFCTR_COHERENT_LINE_HIT = 0x51, + + ARMV7_PERFCTR_ICACHE_DEP_STALL_CYCLES = 0x60, + ARMV7_PERFCTR_DCACHE_DEP_STALL_CYCLES = 0x61, + ARMV7_PERFCTR_TLB_MISS_DEP_STALL_CYCLES = 0x62, + ARMV7_PERFCTR_STREX_EXECUTED_PASSED = 0x63, + ARMV7_PERFCTR_STREX_EXECUTED_FAILED = 0x64, + ARMV7_PERFCTR_DATA_EVICTION = 0x65, + ARMV7_PERFCTR_ISSUE_STAGE_NO_INST = 0x66, + ARMV7_PERFCTR_ISSUE_STAGE_EMPTY = 0x67, + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE = 0x68, + + ARMV7_PERFCTR_PREDICTABLE_FUNCT_RETURNS = 0x6E, + + ARMV7_PERFCTR_MAIN_UNIT_EXECUTED_INST = 0x70, + ARMV7_PERFCTR_SECOND_UNIT_EXECUTED_INST = 0x71, + ARMV7_PERFCTR_LD_ST_UNIT_EXECUTED_INST = 0x72, + ARMV7_PERFCTR_FP_EXECUTED_INST = 0x73, + ARMV7_PERFCTR_NEON_EXECUTED_INST = 0x74, + + ARMV7_PERFCTR_PLD_FULL_DEP_STALL_CYCLES = 0x80, + ARMV7_PERFCTR_DATA_WR_DEP_STALL_CYCLES = 0x81, + ARMV7_PERFCTR_ITLB_MISS_DEP_STALL_CYCLES = 0x82, + ARMV7_PERFCTR_DTLB_MISS_DEP_STALL_CYCLES = 0x83, + ARMV7_PERFCTR_MICRO_ITLB_MISS_DEP_STALL_CYCLES = 0x84, + ARMV7_PERFCTR_MICRO_DTLB_MISS_DEP_STALL_CYCLES = 0x85, + ARMV7_PERFCTR_DMB_DEP_STALL_CYCLES = 0x86, + + ARMV7_PERFCTR_INTGR_CLK_ENABLED_CYCLES = 0x8A, + ARMV7_PERFCTR_DATA_ENGINE_CLK_EN_CYCLES = 0x8B, + + ARMV7_PERFCTR_ISB_INST = 0x90, + ARMV7_PERFCTR_DSB_INST = 0x91, + ARMV7_PERFCTR_DMB_INST = 0x92, + ARMV7_PERFCTR_EXT_INTERRUPTS = 0x93, + + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_COMPLETED = 0xA0, + ARMV7_PERFCTR_PLE_CACHE_LINE_RQST_SKIPPED = 0xA1, + ARMV7_PERFCTR_PLE_FIFO_FLUSH = 0xA2, + ARMV7_PERFCTR_PLE_RQST_COMPLETED = 0xA3, + ARMV7_PERFCTR_PLE_FIFO_OVERFLOW = 0xA4, + ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 +}; + +/* + * Cortex-A8 HW events mapping + * + * The hardware events that we support. We do support cache operations but + * we have harvard caches and no way to combine instruction and data + * accesses/misses in hardware. + */ +static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_INST, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_INST_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Cortex-A9 HW events mapping + */ +static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = + ARMV7_PERFCTR_INST_OUT_OF_RENAME_STAGE, + [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_COHERENT_LINE_HIT, + [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_COHERENT_LINE_MISS, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, +}; + +static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + /* + * The performance counters don't differentiate between read + * and write accesses/misses so this isn't strictly correct, + * but it's the best we can do. Writes and reads get + * combined. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + /* + * Only ITLB misses and DTLB refills are supported. + * If users want the DTLB refills misses a raw counter + * must be used. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_WRITE, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Perf Events counters + */ +enum armv7_counters { + ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */ + ARMV7_COUNTER0 = 2, /* First event counter */ +}; + +/* + * The cycle counter is ARMV7_CYCLE_COUNTER. + * The first event counter is ARMV7_COUNTER0. + * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1). + */ +#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1) + +/* + * ARMv7 low level PMNC access + */ + +/* + * Per-CPU PMNC: config reg + */ +#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */ +#define ARMV7_PMNC_P (1 << 1) /* Reset all counters */ +#define ARMV7_PMNC_C (1 << 2) /* Cycle counter reset */ +#define ARMV7_PMNC_D (1 << 3) /* CCNT counts every 64th cpu cycle */ +#define ARMV7_PMNC_X (1 << 4) /* Export to ETM */ +#define ARMV7_PMNC_DP (1 << 5) /* Disable CCNT if non-invasive debug*/ +#define ARMV7_PMNC_N_SHIFT 11 /* Number of counters supported */ +#define ARMV7_PMNC_N_MASK 0x1f +#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */ + +/* + * Available counters + */ +#define ARMV7_CNT0 0 /* First event counter */ +#define ARMV7_CCNT 31 /* Cycle counter */ + +/* Perf Event to low level counters mapping */ +#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0) + +/* + * CNTENS: counters enable reg + */ +#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENS_C (1 << ARMV7_CCNT) + +/* + * CNTENC: counters disable reg + */ +#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_CNTENC_C (1 << ARMV7_CCNT) + +/* + * INTENS: counters overflow interrupt enable reg + */ +#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENS_C (1 << ARMV7_CCNT) + +/* + * INTENC: counters overflow interrupt disable reg + */ +#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_INTENC_C (1 << ARMV7_CCNT) + +/* + * EVTSEL: Event selection reg + */ +#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ + +/* + * SELECT: Counter selection reg + */ +#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */ + +/* + * FLAG: counters overflow flag status reg + */ +#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx)) +#define ARMV7_FLAG_C (1 << ARMV7_CCNT) +#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */ +#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK + +static inline unsigned long armv7_pmnc_read(void) +{ + u32 val; + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val)); + return val; +} + +static inline void armv7_pmnc_write(unsigned long val) +{ + val &= ARMV7_PMNC_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val)); +} + +static inline int armv7_pmnc_has_overflowed(unsigned long pmnc) +{ + return pmnc & ARMV7_OVERFLOWED_MASK; +} + +static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc, + enum armv7_counters counter) +{ + int ret = 0; + + if (counter == ARMV7_CYCLE_COUNTER) + ret = pmnc & ARMV7_FLAG_C; + else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST)) + ret = pmnc & ARMV7_FLAG_P(counter); + else + pr_err("CPU%u checking wrong counter %d overflow status\n", + smp_processor_id(), counter); + + return ret; +} + +static inline int armv7_pmnc_select_counter(unsigned int idx) +{ + u32 val; + + if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) { + pr_err("CPU%u selecting wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val)); + + return idx; +} + +static inline u32 armv7pmu_read_counter(int idx) +{ + unsigned long value = 0; + + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mrc p15, 0, %0, c9, c13, 2" + : "=r" (value)); + } else + pr_err("CPU%u reading wrong counter %d\n", + smp_processor_id(), idx); + + return value; +} + +static inline void armv7pmu_write_counter(int idx, u32 value) +{ + if (idx == ARMV7_CYCLE_COUNTER) + asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value)); + else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) { + if (armv7_pmnc_select_counter(idx) == idx) + asm volatile("mcr p15, 0, %0, c9, c13, 2" + : : "r" (value)); + } else + pr_err("CPU%u writing wrong counter %d\n", + smp_processor_id(), idx); +} + +static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val) +{ + if (armv7_pmnc_select_counter(idx) == idx) { + val &= ARMV7_EVTSEL_MASK; + asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val)); + } +} + +static inline u32 armv7_pmnc_enable_counter(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENS_C; + else + val = ARMV7_CNTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_counter(unsigned int idx) +{ + u32 val; + + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_CNTENC_C; + else + val = ARMV7_CNTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_enable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u enabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENS_C; + else + val = ARMV7_INTENS_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_disable_intens(unsigned int idx) +{ + u32 val; + + if ((idx != ARMV7_CYCLE_COUNTER) && + ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) { + pr_err("CPU%u disabling wrong PMNC counter" + " interrupt enable %d\n", smp_processor_id(), idx); + return -1; + } + + if (idx == ARMV7_CYCLE_COUNTER) + val = ARMV7_INTENC_C; + else + val = ARMV7_INTENC_P(idx); + + asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val)); + + return idx; +} + +static inline u32 armv7_pmnc_getreset_flags(void) +{ + u32 val; + + /* Read */ + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + + /* Write to clear flags */ + val &= ARMV7_FLAG_MASK; + asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (val)); + + return val; +} + +#ifdef DEBUG +static void armv7_pmnc_dump_regs(void) +{ + u32 val; + unsigned int cnt; + + printk(KERN_INFO "PMNC registers dump:\n"); + + asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val)); + printk(KERN_INFO "PMNC =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val)); + printk(KERN_INFO "CNTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val)); + printk(KERN_INFO "INTENS=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val)); + printk(KERN_INFO "FLAGS =0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val)); + printk(KERN_INFO "SELECT=0x%08x\n", val); + + asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val)); + printk(KERN_INFO "CCNT =0x%08x\n", val); + + for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) { + armv7_pmnc_select_counter(cnt); + asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val)); + printk(KERN_INFO "CNT[%d] count =0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val)); + printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n", + cnt-ARMV7_EVENT_CNT_TO_CNTx, val); + } +} +#endif + +void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Enable counter and interrupt, and set the counter to count + * the event that we're interested in. + */ + spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Set event (if destined for PMNx counters) + * We don't need to set the event if it's a cycle count + */ + if (idx != ARMV7_CYCLE_COUNTER) + armv7_pmnc_write_evtsel(idx, hwc->config_base); + + /* + * Enable interrupt for this counter + */ + armv7_pmnc_enable_intens(idx); + + /* + * Enable counter + */ + armv7_pmnc_enable_counter(idx); + + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags; + + /* + * Disable counter and interrupt + */ + spin_lock_irqsave(&pmu_lock, flags); + + /* + * Disable counter + */ + armv7_pmnc_disable_counter(idx); + + /* + * Disable interrupt for this counter + */ + armv7_pmnc_disable_intens(idx); + + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * Get and reset the IRQ flags + */ + pmnc = armv7_pmnc_getreset_flags(); + + /* + * Did an overflow occur? + */ + if (!armv7_pmnc_has_overflowed(pmnc)) + return IRQ_NONE; + + /* + * Handle the counter(s) overflow(s) + */ + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + /* + * We have a single interrupt for all counters. Check that + * each counter has overflowed before we process it. + */ + if (!armv7_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + /* + * Handle the pending perf events. + * + * Note: this call *must* be run with interrupts disabled. For + * platforms that can have the PMU interrupts raised as an NMI, this + * will not work. + */ + irq_work_run(); + + return IRQ_HANDLED; +} + +static void armv7pmu_start(void) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_lock, flags); + /* Enable all counters */ + armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void armv7pmu_stop(void) +{ + unsigned long flags; + + spin_lock_irqsave(&pmu_lock, flags); + /* Disable all counters */ + armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx; + + /* Always place a cycle counter into the cycle counter. */ + if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) { + if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return ARMV7_CYCLE_COUNTER; + } else { + /* + * For anything other than a cycle counter, try and use + * the events counters + */ + for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) { + if (!test_and_set_bit(idx, cpuc->used_mask)) + return idx; + } + + /* The counters are all in use. */ + return -EAGAIN; + } +} + +static struct arm_pmu armv7pmu = { + .handle_irq = armv7pmu_handle_irq, + .enable = armv7pmu_enable_event, + .disable = armv7pmu_disable_event, + .read_counter = armv7pmu_read_counter, + .write_counter = armv7pmu_write_counter, + .get_event_idx = armv7pmu_get_event_idx, + .start = armv7pmu_start, + .stop = armv7pmu_stop, + .raw_event_mask = 0xFF, + .max_period = (1LLU << 32) - 1, +}; + +static u32 __init armv7_reset_read_pmnc(void) +{ + u32 nb_cnt; + + /* Initialize & Reset PMNC: C and P bits */ + armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C); + + /* Read the nb of CNTx counters supported from PMNC */ + nb_cnt = (armv7_pmnc_read() >> ARMV7_PMNC_N_SHIFT) & ARMV7_PMNC_N_MASK; + + /* Add the CPU cycles counter and return */ + return nb_cnt + 1; +} + +const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA8; + armv7pmu.name = "ARMv7 Cortex-A8"; + armv7pmu.cache_map = &armv7_a8_perf_cache_map; + armv7pmu.event_map = &armv7_a8_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} + +const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA9; + armv7pmu.name = "ARMv7 Cortex-A9"; + armv7pmu.cache_map = &armv7_a9_perf_cache_map; + armv7pmu.event_map = &armv7_a9_perf_map; + armv7pmu.num_events = armv7_reset_read_pmnc(); + return &armv7pmu; +} +#else +const struct arm_pmu *__init armv7_a8_pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init armv7_a9_pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c new file mode 100644 index 00000000000..4e9592789d4 --- /dev/null +++ b/arch/arm/kernel/perf_event_xscale.c @@ -0,0 +1,807 @@ +/* + * ARMv5 [xscale] Performance counter handling code. + * + * Copyright (C) 2010, ARM Ltd., Will Deacon <will.deacon@arm.com> + * + * Based on the previous xscale OProfile code. + * + * There are two variants of the xscale PMU that we support: + * - xscale1pmu: 2 event counters and a cycle counter + * - xscale2pmu: 4 event counters and a cycle counter + * The two variants share event definitions, but have different + * PMU structures. + */ + +#ifdef CONFIG_CPU_XSCALE +enum xscale_perf_types { + XSCALE_PERFCTR_ICACHE_MISS = 0x00, + XSCALE_PERFCTR_ICACHE_NO_DELIVER = 0x01, + XSCALE_PERFCTR_DATA_STALL = 0x02, + XSCALE_PERFCTR_ITLB_MISS = 0x03, + XSCALE_PERFCTR_DTLB_MISS = 0x04, + XSCALE_PERFCTR_BRANCH = 0x05, + XSCALE_PERFCTR_BRANCH_MISS = 0x06, + XSCALE_PERFCTR_INSTRUCTION = 0x07, + XSCALE_PERFCTR_DCACHE_FULL_STALL = 0x08, + XSCALE_PERFCTR_DCACHE_FULL_STALL_CONTIG = 0x09, + XSCALE_PERFCTR_DCACHE_ACCESS = 0x0A, + XSCALE_PERFCTR_DCACHE_MISS = 0x0B, + XSCALE_PERFCTR_DCACHE_WRITE_BACK = 0x0C, + XSCALE_PERFCTR_PC_CHANGED = 0x0D, + XSCALE_PERFCTR_BCU_REQUEST = 0x10, + XSCALE_PERFCTR_BCU_FULL = 0x11, + XSCALE_PERFCTR_BCU_DRAIN = 0x12, + XSCALE_PERFCTR_BCU_ECC_NO_ELOG = 0x14, + XSCALE_PERFCTR_BCU_1_BIT_ERR = 0x15, + XSCALE_PERFCTR_RMW = 0x16, + /* XSCALE_PERFCTR_CCNT is not hardware defined */ + XSCALE_PERFCTR_CCNT = 0xFE, + XSCALE_PERFCTR_UNUSED = 0xFF, +}; + +enum xscale_counters { + XSCALE_CYCLE_COUNTER = 1, + XSCALE_COUNTER0, + XSCALE_COUNTER1, + XSCALE_COUNTER2, + XSCALE_COUNTER3, +}; + +static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, + [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, + [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +#define XSCALE_PMU_ENABLE 0x001 +#define XSCALE_PMN_RESET 0x002 +#define XSCALE_CCNT_RESET 0x004 +#define XSCALE_PMU_RESET (CCNT_RESET | PMN_RESET) +#define XSCALE_PMU_CNT64 0x008 + +#define XSCALE1_OVERFLOWED_MASK 0x700 +#define XSCALE1_CCOUNT_OVERFLOW 0x400 +#define XSCALE1_COUNT0_OVERFLOW 0x100 +#define XSCALE1_COUNT1_OVERFLOW 0x200 +#define XSCALE1_CCOUNT_INT_EN 0x040 +#define XSCALE1_COUNT0_INT_EN 0x010 +#define XSCALE1_COUNT1_INT_EN 0x020 +#define XSCALE1_COUNT0_EVT_SHFT 12 +#define XSCALE1_COUNT0_EVT_MASK (0xff << XSCALE1_COUNT0_EVT_SHFT) +#define XSCALE1_COUNT1_EVT_SHFT 20 +#define XSCALE1_COUNT1_EVT_MASK (0xff << XSCALE1_COUNT1_EVT_SHFT) + +static inline u32 +xscale1pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c0, 0" : "=r" (val)); + return val; +} + +static inline void +xscale1pmu_write_pmnc(u32 val) +{ + /* upper 4bits and 7, 11 are write-as-0 */ + val &= 0xffff77f; + asm volatile("mcr p14, 0, %0, c0, c0, 0" : : "r" (val)); +} + +static inline int +xscale1_pmnc_counter_has_overflowed(unsigned long pmnc, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = pmnc & XSCALE1_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = pmnc & XSCALE1_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = pmnc & XSCALE1_COUNT1_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale1pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* + * NOTE: there's an A stepping erratum that states if an overflow + * bit already exists and another occurs, the previous + * Overflow bit gets cleared. There's no workaround. + * Fixed in B stepping or later. + */ + pmnc = xscale1pmu_read_pmnc(); + + /* + * Write the value back to clear the overflow flags. Overflow + * flags remain in pmnc for use below. We also disable the PMU + * while we process the interrupt. + */ + xscale1pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + if (!(pmnc & XSCALE1_OVERFLOWED_MASK)) + return IRQ_NONE; + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale1pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = 0; + evt = XSCALE1_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT0_EVT_SHFT) | + XSCALE1_COUNT0_INT_EN; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_EVT_MASK; + evt = (hwc->config_base << XSCALE1_COUNT1_EVT_SHFT) | + XSCALE1_COUNT1_INT_EN; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long val, mask, evt, flags; + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + mask = XSCALE1_CCOUNT_INT_EN; + evt = 0; + break; + case XSCALE_COUNTER0: + mask = XSCALE1_COUNT0_INT_EN | XSCALE1_COUNT0_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + mask = XSCALE1_COUNT1_INT_EN | XSCALE1_COUNT1_EVT_MASK; + evt = XSCALE_PERFCTR_UNUSED << XSCALE1_COUNT1_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~mask; + val |= evt; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + if (XSCALE_PERFCTR_CCNT == event->config_base) { + if (test_and_set_bit(XSCALE_CYCLE_COUNTER, cpuc->used_mask)) + return -EAGAIN; + + return XSCALE_CYCLE_COUNTER; + } else { + if (!test_and_set_bit(XSCALE_COUNTER1, cpuc->used_mask)) + return XSCALE_COUNTER1; + + if (!test_and_set_bit(XSCALE_COUNTER0, cpuc->used_mask)) + return XSCALE_COUNTER0; + + return -EAGAIN; + } +} + +static void +xscale1pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val |= XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale1pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale1pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale1pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale1pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c2, c0, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c3, c0, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale1pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c2, c0, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c3, c0, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale1pmu = { + .id = ARM_PERF_PMU_ID_XSCALE1, + .name = "xscale1", + .handle_irq = xscale1pmu_handle_irq, + .enable = xscale1pmu_enable_event, + .disable = xscale1pmu_disable_event, + .read_counter = xscale1pmu_read_counter, + .write_counter = xscale1pmu_write_counter, + .get_event_idx = xscale1pmu_get_event_idx, + .start = xscale1pmu_start, + .stop = xscale1pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 3, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init xscale1pmu_init(void) +{ + return &xscale1pmu; +} + +#define XSCALE2_OVERFLOWED_MASK 0x01f +#define XSCALE2_CCOUNT_OVERFLOW 0x001 +#define XSCALE2_COUNT0_OVERFLOW 0x002 +#define XSCALE2_COUNT1_OVERFLOW 0x004 +#define XSCALE2_COUNT2_OVERFLOW 0x008 +#define XSCALE2_COUNT3_OVERFLOW 0x010 +#define XSCALE2_CCOUNT_INT_EN 0x001 +#define XSCALE2_COUNT0_INT_EN 0x002 +#define XSCALE2_COUNT1_INT_EN 0x004 +#define XSCALE2_COUNT2_INT_EN 0x008 +#define XSCALE2_COUNT3_INT_EN 0x010 +#define XSCALE2_COUNT0_EVT_SHFT 0 +#define XSCALE2_COUNT0_EVT_MASK (0xff << XSCALE2_COUNT0_EVT_SHFT) +#define XSCALE2_COUNT1_EVT_SHFT 8 +#define XSCALE2_COUNT1_EVT_MASK (0xff << XSCALE2_COUNT1_EVT_SHFT) +#define XSCALE2_COUNT2_EVT_SHFT 16 +#define XSCALE2_COUNT2_EVT_MASK (0xff << XSCALE2_COUNT2_EVT_SHFT) +#define XSCALE2_COUNT3_EVT_SHFT 24 +#define XSCALE2_COUNT3_EVT_MASK (0xff << XSCALE2_COUNT3_EVT_SHFT) + +static inline u32 +xscale2pmu_read_pmnc(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c0, c1, 0" : "=r" (val)); + /* bits 1-2 and 4-23 are read-unpredictable */ + return val & 0xff000009; +} + +static inline void +xscale2pmu_write_pmnc(u32 val) +{ + /* bits 4-23 are write-as-0, 24-31 are write ignored */ + val &= 0xf; + asm volatile("mcr p14, 0, %0, c0, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_overflow_flags(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c5, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_overflow_flags(u32 val) +{ + asm volatile("mcr p14, 0, %0, c5, c1, 0" : : "r" (val)); +} + +static inline u32 +xscale2pmu_read_event_select(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c8, c1, 0" : "=r" (val)); + return val; +} + +static inline void +xscale2pmu_write_event_select(u32 val) +{ + asm volatile("mcr p14, 0, %0, c8, c1, 0" : : "r"(val)); +} + +static inline u32 +xscale2pmu_read_int_enable(void) +{ + u32 val; + asm volatile("mrc p14, 0, %0, c4, c1, 0" : "=r" (val)); + return val; +} + +static void +xscale2pmu_write_int_enable(u32 val) +{ + asm volatile("mcr p14, 0, %0, c4, c1, 0" : : "r" (val)); +} + +static inline int +xscale2_pmnc_counter_has_overflowed(unsigned long of_flags, + enum xscale_counters counter) +{ + int ret = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + ret = of_flags & XSCALE2_CCOUNT_OVERFLOW; + break; + case XSCALE_COUNTER0: + ret = of_flags & XSCALE2_COUNT0_OVERFLOW; + break; + case XSCALE_COUNTER1: + ret = of_flags & XSCALE2_COUNT1_OVERFLOW; + break; + case XSCALE_COUNTER2: + ret = of_flags & XSCALE2_COUNT2_OVERFLOW; + break; + case XSCALE_COUNTER3: + ret = of_flags & XSCALE2_COUNT3_OVERFLOW; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", counter); + } + + return ret; +} + +static irqreturn_t +xscale2pmu_handle_irq(int irq_num, void *dev) +{ + unsigned long pmnc, of_flags; + struct perf_sample_data data; + struct cpu_hw_events *cpuc; + struct pt_regs *regs; + int idx; + + /* Disable the PMU. */ + pmnc = xscale2pmu_read_pmnc(); + xscale2pmu_write_pmnc(pmnc & ~XSCALE_PMU_ENABLE); + + /* Check the overflow flag register. */ + of_flags = xscale2pmu_read_overflow_flags(); + if (!(of_flags & XSCALE2_OVERFLOWED_MASK)) + return IRQ_NONE; + + /* Clear the overflow bits. */ + xscale2pmu_write_overflow_flags(of_flags); + + regs = get_irq_regs(); + + perf_sample_data_init(&data, 0); + + cpuc = &__get_cpu_var(cpu_hw_events); + for (idx = 0; idx <= armpmu->num_events; ++idx) { + struct perf_event *event = cpuc->events[idx]; + struct hw_perf_event *hwc; + + if (!test_bit(idx, cpuc->active_mask)) + continue; + + if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx)) + continue; + + hwc = &event->hw; + armpmu_event_update(event, hwc, idx); + data.period = event->hw.last_period; + if (!armpmu_event_set_period(event, hwc, idx)) + continue; + + if (perf_event_overflow(event, 0, &data, regs)) + armpmu->disable(hwc, idx); + } + + irq_work_run(); + + /* + * Re-enable the PMU. + */ + pmnc = xscale2pmu_read_pmnc() | XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(pmnc); + + return IRQ_HANDLED; +} + +static void +xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien |= XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien |= XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien |= XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien |= XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien |= XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= hwc->config_base << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx) +{ + unsigned long flags, ien, evtsel; + + ien = xscale2pmu_read_int_enable(); + evtsel = xscale2pmu_read_event_select(); + + switch (idx) { + case XSCALE_CYCLE_COUNTER: + ien &= ~XSCALE2_CCOUNT_INT_EN; + break; + case XSCALE_COUNTER0: + ien &= ~XSCALE2_COUNT0_INT_EN; + evtsel &= ~XSCALE2_COUNT0_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT0_EVT_SHFT; + break; + case XSCALE_COUNTER1: + ien &= ~XSCALE2_COUNT1_INT_EN; + evtsel &= ~XSCALE2_COUNT1_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT1_EVT_SHFT; + break; + case XSCALE_COUNTER2: + ien &= ~XSCALE2_COUNT2_INT_EN; + evtsel &= ~XSCALE2_COUNT2_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT2_EVT_SHFT; + break; + case XSCALE_COUNTER3: + ien &= ~XSCALE2_COUNT3_INT_EN; + evtsel &= ~XSCALE2_COUNT3_EVT_MASK; + evtsel |= XSCALE_PERFCTR_UNUSED << XSCALE2_COUNT3_EVT_SHFT; + break; + default: + WARN_ONCE(1, "invalid counter number (%d)\n", idx); + return; + } + + spin_lock_irqsave(&pmu_lock, flags); + xscale2pmu_write_event_select(evtsel); + xscale2pmu_write_int_enable(ien); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static int +xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc, + struct hw_perf_event *event) +{ + int idx = xscale1pmu_get_event_idx(cpuc, event); + if (idx >= 0) + goto out; + + if (!test_and_set_bit(XSCALE_COUNTER3, cpuc->used_mask)) + idx = XSCALE_COUNTER3; + else if (!test_and_set_bit(XSCALE_COUNTER2, cpuc->used_mask)) + idx = XSCALE_COUNTER2; +out: + return idx; +} + +static void +xscale2pmu_start(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64; + val |= XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static void +xscale2pmu_stop(void) +{ + unsigned long flags, val; + + spin_lock_irqsave(&pmu_lock, flags); + val = xscale2pmu_read_pmnc(); + val &= ~XSCALE_PMU_ENABLE; + xscale2pmu_write_pmnc(val); + spin_unlock_irqrestore(&pmu_lock, flags); +} + +static inline u32 +xscale2pmu_read_counter(int counter) +{ + u32 val = 0; + + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mrc p14, 0, %0, c1, c1, 0" : "=r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mrc p14, 0, %0, c0, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mrc p14, 0, %0, c1, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mrc p14, 0, %0, c2, c2, 0" : "=r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mrc p14, 0, %0, c3, c2, 0" : "=r" (val)); + break; + } + + return val; +} + +static inline void +xscale2pmu_write_counter(int counter, u32 val) +{ + switch (counter) { + case XSCALE_CYCLE_COUNTER: + asm volatile("mcr p14, 0, %0, c1, c1, 0" : : "r" (val)); + break; + case XSCALE_COUNTER0: + asm volatile("mcr p14, 0, %0, c0, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER1: + asm volatile("mcr p14, 0, %0, c1, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER2: + asm volatile("mcr p14, 0, %0, c2, c2, 0" : : "r" (val)); + break; + case XSCALE_COUNTER3: + asm volatile("mcr p14, 0, %0, c3, c2, 0" : : "r" (val)); + break; + } +} + +static const struct arm_pmu xscale2pmu = { + .id = ARM_PERF_PMU_ID_XSCALE2, + .name = "xscale2", + .handle_irq = xscale2pmu_handle_irq, + .enable = xscale2pmu_enable_event, + .disable = xscale2pmu_disable_event, + .read_counter = xscale2pmu_read_counter, + .write_counter = xscale2pmu_write_counter, + .get_event_idx = xscale2pmu_get_event_idx, + .start = xscale2pmu_start, + .stop = xscale2pmu_stop, + .cache_map = &xscale_perf_cache_map, + .event_map = &xscale_perf_map, + .raw_event_mask = 0xFF, + .num_events = 5, + .max_period = (1LLU << 32) - 1, +}; + +const struct arm_pmu *__init xscale2pmu_init(void) +{ + return &xscale2pmu; +} +#else +const struct arm_pmu *__init xscale1pmu_init(void) +{ + return NULL; +} + +const struct arm_pmu *__init xscale2pmu_init(void) +{ + return NULL; +} +#endif /* CONFIG_CPU_XSCALE */ diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c new file mode 100644 index 00000000000..2cdcc9287c7 --- /dev/null +++ b/arch/arm/kernel/sched_clock.c @@ -0,0 +1,69 @@ +/* + * sched_clock.c: support for extending counters to full 64-bit ns counter + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clocksource.h> +#include <linux/init.h> +#include <linux/jiffies.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/timer.h> + +#include <asm/sched_clock.h> + +static void sched_clock_poll(unsigned long wrap_ticks); +static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static void (*sched_clock_update_fn)(void); + +static void sched_clock_poll(unsigned long wrap_ticks) +{ + mod_timer(&sched_clock_timer, round_jiffies(jiffies + wrap_ticks)); + sched_clock_update_fn(); +} + +void __init init_sched_clock(struct clock_data *cd, void (*update)(void), + unsigned int clock_bits, unsigned long rate) +{ + unsigned long r, w; + u64 res, wrap; + char r_unit; + + sched_clock_update_fn = update; + + /* calculate the mult/shift to convert counter ticks to ns. */ + clocks_calc_mult_shift(&cd->mult, &cd->shift, rate, NSEC_PER_SEC, 60); + + r = rate; + if (r >= 4000000) { + r /= 1000000; + r_unit = 'M'; + } else { + r /= 1000; + r_unit = 'k'; + } + + /* calculate how many ns until we wrap */ + wrap = cyc_to_ns((1ULL << clock_bits) - 1, cd->mult, cd->shift); + do_div(wrap, NSEC_PER_MSEC); + w = wrap; + + /* calculate the ns resolution of this counter */ + res = cyc_to_ns(1ULL, cd->mult, cd->shift); + pr_info("sched_clock: %u bits at %lu%cHz, resolution %lluns, wraps every %lums\n", + clock_bits, r, r_unit, res, w); + + /* + * Start the timer to keep sched_clock() properly updated and + * sets the initial epoch. + */ + sched_clock_timer.data = msecs_to_jiffies(w - (w / 10)); + sched_clock_poll(sched_clock_timer.data); + + /* + * Ensure that sched_clock() starts off at 0ns + */ + cd->epoch_ns = 0; +} diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 9066473c0eb..b6b78b22031 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,6 +16,7 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> +#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -456,7 +457,7 @@ static void ipi_timer(void) } #ifdef CONFIG_LOCAL_TIMERS -asmlinkage void __exception do_local_timer(struct pt_regs *regs) +asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); @@ -543,7 +544,7 @@ static void ipi_cpu_stop(unsigned int cpu) * * Bit 0 - Inter-processor function call */ -asmlinkage void __exception do_IPI(struct pt_regs *regs) +asmlinkage void __exception_irq_entry do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index cead8893b46..897c1a8f169 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -101,6 +101,7 @@ SECTIONS __exception_text_start = .; *(.exception.text) __exception_text_end = .; + IRQENTRY_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 2500f41d8d2..1dd69c85dfe 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -101,7 +101,6 @@ static struct clocksource clk32k = { .rating = 150, .read = read_clk32k, .mask = CLOCKSOURCE_MASK(20), - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -201,8 +200,7 @@ void __init at91rm9200_timer_init(void) clockevents_register_device(&clkevt); /* register clocksource */ - clk32k.mult = clocksource_hz2mult(AT91_SLOW_CLOCK, clk32k.shift); - clocksource_register(&clk32k); + clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK); } struct sys_timer at91rm9200_timer = { diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index 608a63240b6..4ba85499fa9 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -51,7 +51,6 @@ static struct clocksource pit_clk = { .name = "pit", .rating = 175, .read = read_pit_clk, - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -163,10 +162,9 @@ static void __init at91sam926x_pit_init(void) * Register clocksource. The high order bits of PIV are unused, * so this isn't a 32-bit counter unless we get clockevent irqs. */ - pit_clk.mult = clocksource_hz2mult(pit_rate, pit_clk.shift); bits = 12 /* PICNT */ + ilog2(pit_cycle) /* PIV */; pit_clk.mask = CLOCKSOURCE_MASK(bits); - clocksource_register(&pit_clk); + clocksource_register_hz(&pit_clk, pit_rate); /* Set up irq handler */ setup_irq(AT91_ID_SYS, &at91sam926x_pit_irq); diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c index d3f959e92b2..b91b1b0fdff 100644 --- a/arch/arm/mach-bcmring/core.c +++ b/arch/arm/mach-bcmring/core.c @@ -294,7 +294,6 @@ static struct clocksource clocksource_bcmring_timer1 = { .rating = 200, .read = bcmring_get_cycles_timer1, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -303,7 +302,6 @@ static struct clocksource clocksource_bcmring_timer3 = { .rating = 100, .read = bcmring_get_cycles_timer3, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -316,10 +314,8 @@ static int __init bcmring_clocksource_init(void) writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, TIMER1_VA_BASE + TIMER_CTRL); - clocksource_bcmring_timer1.mult = - clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000, - clocksource_bcmring_timer1.shift); - clocksource_register(&clocksource_bcmring_timer1); + clocksource_register_khz(&clocksource_bcmring_timer1, + TIMER1_FREQUENCY_MHZ * 1000); /* setup timer3 as free-running clocksource */ writel(0, TIMER3_VA_BASE + TIMER_CTRL); @@ -328,10 +324,8 @@ static int __init bcmring_clocksource_init(void) writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC, TIMER3_VA_BASE + TIMER_CTRL); - clocksource_bcmring_timer3.mult = - clocksource_khz2mult(TIMER3_FREQUENCY_KHZ, - clocksource_bcmring_timer3.shift); - clocksource_register(&clocksource_bcmring_timer3); + clocksource_register_khz(&clocksource_bcmring_timer3, + TIMER3_FREQUENCY_KHZ); return 0; } diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 0f21c36e65d..c1486716de7 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -276,7 +276,6 @@ static struct clocksource clocksource_davinci = { .rating = 300, .read = read_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 24, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -378,10 +377,8 @@ static void __init davinci_timer_init(void) /* setup clocksource */ clocksource_davinci.name = id_to_name[clocksource_id]; - clocksource_davinci.mult = - clocksource_khz2mult(davinci_clock_tick_rate/1000, - clocksource_davinci.shift); - if (clocksource_register(&clocksource_davinci)) + if (clocksource_register_hz(&clocksource_davinci, + davinci_clock_tick_rate)) printk(err, clocksource_davinci.name); /* setup clockevent */ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 548208f1117..2774df8021d 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -372,7 +372,6 @@ static struct clocksource clocksource_timersp = { .rating = 200, .read = timersp_read, .mask = CLOCKSOURCE_MASK(16), - .shift = 16, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -390,8 +389,7 @@ static void integrator_clocksource_init(u32 khz) writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); - cs->mult = clocksource_khz2mult(khz, cs->shift); - clocksource_register(cs); + clocksource_register_khz(cs, khz); } static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 0bce09799d1..4dbfcbb9163 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -35,6 +35,7 @@ #include <asm/pgtable.h> #include <asm/page.h> #include <asm/irq.h> +#include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> @@ -399,6 +400,23 @@ void __init ixp4xx_sys_init(void) } /* + * sched_clock() + */ +static DEFINE_CLOCK_DATA(cd); + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = *IXP4XX_OSTS; + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace ixp4xx_update_sched_clock(void) +{ + u32 cyc = *IXP4XX_OSTS; + update_sched_clock(&cd, cyc, (u32)~0); +} + +/* * clocksource */ static cycle_t ixp4xx_get_cycles(struct clocksource *cs) @@ -411,7 +429,6 @@ static struct clocksource clocksource_ixp4xx = { .rating = 200, .read = ixp4xx_get_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -419,21 +436,9 @@ unsigned long ixp4xx_timer_freq = FREQ; EXPORT_SYMBOL(ixp4xx_timer_freq); static void __init ixp4xx_clocksource_init(void) { - clocksource_ixp4xx.mult = - clocksource_hz2mult(ixp4xx_timer_freq, - clocksource_ixp4xx.shift); - clocksource_register(&clocksource_ixp4xx); -} - -/* - * sched_clock() - */ -unsigned long long sched_clock(void) -{ - cycle_t cyc = ixp4xx_get_cycles(NULL); - struct clocksource *cs = &clocksource_ixp4xx; + init_sched_clock(&cd, ixp4xx_update_sched_clock, 32, ixp4xx_timer_freq); - return clocksource_cyc2ns(cyc, cs->mult, cs->shift); + clocksource_register_hz(&clocksource_ixp4xx, ixp4xx_timer_freq); } /* diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c index 630dd4a74b2..6162ac308c2 100644 --- a/arch/arm/mach-lpc32xx/timer.c +++ b/arch/arm/mach-lpc32xx/timer.c @@ -38,7 +38,6 @@ static cycle_t lpc32xx_clksrc_read(struct clocksource *cs) static struct clocksource lpc32xx_clksrc = { .name = "lpc32xx_clksrc", - .shift = 24, .rating = 300, .read = lpc32xx_clksrc_read, .mask = CLOCKSOURCE_MASK(32), @@ -171,9 +170,7 @@ static void __init lpc32xx_timer_init(void) __raw_writel(0, LCP32XX_TIMER_MCR(LPC32XX_TIMER1_BASE)); __raw_writel(LCP32XX_TIMER_CNTR_TCR_EN, LCP32XX_TIMER_TCR(LPC32XX_TIMER1_BASE)); - lpc32xx_clksrc.mult = clocksource_hz2mult(clkrate, - lpc32xx_clksrc.shift); - clocksource_register(&lpc32xx_clksrc); + clocksource_register_hz(&lpc32xx_clksrc, clkrate); } struct sys_timer lpc32xx_timer = { diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 66528193f93..aeb9ae23e6c 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -26,8 +26,8 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/sched.h> -#include <linux/cnt32_to_63.h> +#include <asm/sched_clock.h> #include <mach/addr-map.h> #include <mach/regs-timers.h> #include <mach/regs-apbc.h> @@ -42,23 +42,7 @@ #define MAX_DELTA (0xfffffffe) #define MIN_DELTA (16) -#define TCR2NS_SCALE_FACTOR 10 - -static unsigned long tcr2ns_scale; - -static void __init set_tcr2ns_scale(unsigned long tcr_rate) -{ - unsigned long long v = 1000000000ULL << TCR2NS_SCALE_FACTOR; - do_div(v, tcr_rate); - tcr2ns_scale = v; - /* - * We want an even value to automatically clear the top bit - * returned by cnt32_to_63() without an additional run time - * instruction. So if the LSB is 1 then round it up. - */ - if (tcr2ns_scale & 1) - tcr2ns_scale++; -} +static DEFINE_CLOCK_DATA(cd); /* * FIXME: the timer needs some delay to stablize the counter capture @@ -75,10 +59,16 @@ static inline uint32_t timer_read(void) return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); } -unsigned long long sched_clock(void) +unsigned long long notrace sched_clock(void) { - unsigned long long v = cnt32_to_63(timer_read()); - return (v * tcr2ns_scale) >> TCR2NS_SCALE_FACTOR; + u32 cyc = timer_read(); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace mmp_update_sched_clock(void) +{ + u32 cyc = timer_read(); + update_sched_clock(&cd, cyc, (u32)~0); } static irqreturn_t timer_interrupt(int irq, void *dev_id) @@ -146,7 +136,6 @@ static cycle_t clksrc_read(struct clocksource *cs) static struct clocksource cksrc = { .name = "clocksource", - .shift = 20, .rating = 200, .read = clksrc_read, .mask = CLOCKSOURCE_MASK(32), @@ -186,17 +175,15 @@ void __init timer_init(int irq) { timer_config(); - set_tcr2ns_scale(CLOCK_TICK_RATE); + init_sched_clock(&cd, mmp_update_sched_clock, 32, CLOCK_TICK_RATE); ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift); ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt); ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt); ckevt.cpumask = cpumask_of(0); - cksrc.mult = clocksource_hz2mult(CLOCK_TICK_RATE, cksrc.shift); - setup_irq(irq, &timer_irq); - clocksource_register(&cksrc); + clocksource_register_hz(&cksrc, CLOCK_TICK_RATE); clockevents_register_device(&ckevt); } diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index dbbcfeb919d..31e5fd63ec9 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -49,6 +49,8 @@ endchoice config MSM_SOC_REV_A bool +config ARCH_MSM_SCORPIONMP + bool config ARCH_MSM_ARM11 bool diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 950100f19d0..595be7fea31 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -137,7 +137,6 @@ static struct msm_clock msm_clocks[] = { .rating = 200, .read = msm_gpt_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 17, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }, .irq = { @@ -164,7 +163,6 @@ static struct msm_clock msm_clocks[] = { .rating = 300, .read = msm_dgt_read, .mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)), - .shift = 24 - MSM_DGT_SHIFT, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }, .irq = { @@ -205,8 +203,7 @@ static void __init msm_timer_init(void) ce->min_delta_ns = clockevent_delta2ns(4, ce); ce->cpumask = cpumask_of(0); - cs->mult = clocksource_hz2mult(clock->freq, cs->shift); - res = clocksource_register(cs); + res = clocksource_register_hz(cs, clock->freq); if (res) printk(KERN_ERR "msm_timer_init: clocksource_register " "failed for %s\n", cs->name); diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c index 82801dbf057..f12f22d09b6 100644 --- a/arch/arm/mach-netx/time.c +++ b/arch/arm/mach-netx/time.c @@ -114,7 +114,6 @@ static struct clocksource clocksource_netx = { .rating = 200, .read = netx_get_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -151,9 +150,7 @@ static void __init netx_timer_init(void) writel(NETX_GPIO_COUNTER_CTRL_RUN, NETX_GPIO_COUNTER_CTRL(TIMER_CLOCKSOURCE)); - clocksource_netx.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, clocksource_netx.shift); - clocksource_register(&clocksource_netx); + clocksource_register_hz(&clocksource_netx, CLOCK_TICK_RATE); netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, netx_clockevent.shift); diff --git a/arch/arm/mach-ns9xxx/time-ns9360.c b/arch/arm/mach-ns9xxx/time-ns9360.c index 77281260358..9ca32f55728 100644 --- a/arch/arm/mach-ns9xxx/time-ns9360.c +++ b/arch/arm/mach-ns9xxx/time-ns9360.c @@ -35,7 +35,6 @@ static struct clocksource ns9360_clocksource = { .rating = 300, .read = ns9360_clocksource_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -148,10 +147,7 @@ static void __init ns9360_timer_init(void) __raw_writel(tc, SYS_TC(TIMER_CLOCKSOURCE)); - ns9360_clocksource.mult = clocksource_hz2mult(ns9360_cpuclock(), - ns9360_clocksource.shift); - - clocksource_register(&ns9360_clocksource); + clocksource_register_hz(&ns9360_clocksource, ns9360_cpuclock()); latch = SH_DIV(ns9360_cpuclock(), HZ, 0); diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 1be6a214d88..abb34ff2041 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -208,7 +208,6 @@ static struct clocksource clocksource_mpu = { .rating = 300, .read = mpu_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 24, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -217,13 +216,10 @@ static void __init omap_init_clocksource(unsigned long rate) static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; - clocksource_mpu.mult - = clocksource_khz2mult(rate/1000, clocksource_mpu.shift); - setup_irq(INT_TIMER2, &omap_mpu_timer2_irq); omap_mpu_timer_start(1, ~0, 1); - if (clocksource_register(&clocksource_mpu)) + if (clocksource_register_hz(&clocksource_mpu, rate)) printk(err, clocksource_mpu.name); } diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index e13c29eecf2..a7816dbdc6b 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -195,7 +195,6 @@ static struct clocksource clocksource_gpt = { .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 24, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -220,9 +219,7 @@ static void __init omap2_gp_clocksource_init(void) omap_dm_timer_set_load_start(gpt, 1, 0); - clocksource_gpt.mult = - clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift); - if (clocksource_register(&clocksource_gpt)) + if (clocksource_register_hz(&clocksource_gpt, tick_rate)) printk(err2, clocksource_gpt.name); } #endif diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c index 293e40aeaf2..e7f64d9b4f2 100644 --- a/arch/arm/mach-pxa/time.c +++ b/arch/arm/mach-pxa/time.c @@ -17,11 +17,11 @@ #include <linux/interrupt.h> #include <linux/clockchips.h> #include <linux/sched.h> -#include <linux/cnt32_to_63.h> #include <asm/div64.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <mach/regs-ost.h> /* @@ -32,29 +32,18 @@ * long as there is always less than 582 seconds between successive * calls to sched_clock() which should always be the case in practice. */ +static DEFINE_CLOCK_DATA(cd); -#define OSCR2NS_SCALE_FACTOR 10 - -static unsigned long oscr2ns_scale; - -static void __init set_oscr2ns_scale(unsigned long oscr_rate) +unsigned long long notrace sched_clock(void) { - unsigned long long v = 1000000000ULL << OSCR2NS_SCALE_FACTOR; - do_div(v, oscr_rate); - oscr2ns_scale = v; - /* - * We want an even value to automatically clear the top bit - * returned by cnt32_to_63() without an additional run time - * instruction. So if the LSB is 1 then round it up. - */ - if (oscr2ns_scale & 1) - oscr2ns_scale++; + u32 cyc = OSCR; + return cyc_to_sched_clock(&cd, cyc, (u32)~0); } -unsigned long long sched_clock(void) +static void notrace pxa_update_sched_clock(void) { - unsigned long long v = cnt32_to_63(OSCR); - return (v * oscr2ns_scale) >> OSCR2NS_SCALE_FACTOR; + u32 cyc = OSCR; + update_sched_clock(&cd, cyc, (u32)~0); } @@ -127,7 +116,6 @@ static struct clocksource cksrc_pxa_oscr0 = { .rating = 200, .read = pxa_read_oscr, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -145,7 +133,7 @@ static void __init pxa_timer_init(void) OIER = 0; OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3; - set_oscr2ns_scale(clock_tick_rate); + init_sched_clock(&cd, pxa_update_sched_clock, 32, clock_tick_rate); ckevt_pxa_osmr0.mult = div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift); @@ -155,12 +143,9 @@ static void __init pxa_timer_init(void) clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1; ckevt_pxa_osmr0.cpumask = cpumask_of(0); - cksrc_pxa_oscr0.mult = - clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift); - setup_irq(IRQ_OST0, &pxa_ost0_irq); - clocksource_register(&cksrc_pxa_oscr0); + clocksource_register_hz(&cksrc_pxa_oscr0, clock_tick_rate); clockevents_register_device(&ckevt_pxa_osmr0); } diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 14fbe50376b..aad806c5cb1 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -52,6 +52,8 @@ #include <mach/irqs.h> #include <asm/hardware/timer-sp.h> +#include <plat/sched_clock.h> + #include "core.h" #ifdef CONFIG_ZONE_DMA @@ -655,6 +657,12 @@ void realview_leds_event(led_event_t ledevt) #endif /* CONFIG_LEDS */ /* + * The sched_clock counter + */ +#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + \ + REALVIEW_SYS_24MHz_OFFSET) + +/* * Where is the timer (VA)? */ void __iomem *timer0_va_base; @@ -669,6 +677,8 @@ void __init realview_timer_init(unsigned int timer_irq) { u32 val; + versatile_sched_clock_init(REFCOUNTER, 24000000); + /* * set clock frequency: * REALVIEW_REFCLK is 32KHz diff --git a/arch/arm/mach-s5pv310/time.c b/arch/arm/mach-s5pv310/time.c index 01b012ad1bf..b262d461533 100644 --- a/arch/arm/mach-s5pv310/time.c +++ b/arch/arm/mach-s5pv310/time.c @@ -211,7 +211,6 @@ struct clocksource pwm_clocksource = { .rating = 250, .read = s5pv310_pwm4_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS , }; @@ -230,10 +229,7 @@ static void __init s5pv310_clocksource_init(void) s5pv310_pwm_init(4, ~0); s5pv310_pwm_start(4, 1); - pwm_clocksource.mult = - clocksource_khz2mult(clock_rate/1000, pwm_clocksource.shift); - - if (clocksource_register(&pwm_clocksource)) + if (clocksource_register_hz(&pwm_clocksource, clock_rate)) panic("%s: can't register clocksource\n", pwm_clocksource.name); } diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 3555d616774..59d14f0fdcf 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -16,9 +16,7 @@ #include <linux/pm.h> #include <linux/cpufreq.h> #include <linux/ioport.h> -#include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/platform_device.h> -#include <linux/cnt32_to_63.h> #include <asm/div64.h> #include <mach/hardware.h> @@ -110,27 +108,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu) } /* - * This is the SA11x0 sched_clock implementation. This has - * a resolution of 271ns, and a maximum value of 32025597s (370 days). - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 582 seconds between successive - * calls to this function. - * - * ( * 1E9 / 3686400 => * 78125 / 288) - */ -unsigned long long sched_clock(void) -{ - unsigned long long v = cnt32_to_63(OSCR); - - /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ - v *= 78125<<1; - do_div(v, 288<<1); - - return v; -} - -/* * Default power-off for SA1100 */ static void sa1100_power_off(void) diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c index 74b6e0e570b..ae4f3d80416 100644 --- a/arch/arm/mach-sa1100/time.c +++ b/arch/arm/mach-sa1100/time.c @@ -12,12 +12,39 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/sched.h> /* just for sched_clock() - funny that */ #include <linux/timex.h> #include <linux/clockchips.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <mach/hardware.h> +/* + * This is the SA11x0 sched_clock implementation. + */ +static DEFINE_CLOCK_DATA(cd); + +/* + * Constants generated by clocks_calc_mult_shift(m, s, 3.6864MHz, + * NSEC_PER_SEC, 60). + * This gives a resolution of about 271ns and a wrap period of about 19min. + */ +#define SC_MULT 2275555556u +#define SC_SHIFT 23 + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = OSCR; + return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); +} + +static void notrace sa1100_update_sched_clock(void) +{ + u32 cyc = OSCR; + update_sched_clock(&cd, cyc, (u32)~0); +} + #define MIN_OSCR_DELTA 2 static irqreturn_t sa1100_ost0_interrupt(int irq, void *dev_id) @@ -81,7 +108,6 @@ static struct clocksource cksrc_sa1100_oscr = { .rating = 200, .read = sa1100_read_oscr, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -97,6 +123,9 @@ static void __init sa1100_timer_init(void) OIER = 0; /* disable any timer interrupts */ OSSR = 0xf; /* clear status on all timers */ + init_fixed_sched_clock(&cd, sa1100_update_sched_clock, 32, + 3686400, SC_MULT, SC_SHIFT); + ckevt_sa1100_osmr0.mult = div_sc(3686400, NSEC_PER_SEC, ckevt_sa1100_osmr0.shift); ckevt_sa1100_osmr0.max_delta_ns = @@ -105,12 +134,9 @@ static void __init sa1100_timer_init(void) clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1; ckevt_sa1100_osmr0.cpumask = cpumask_of(0); - cksrc_sa1100_oscr.mult = - clocksource_hz2mult(CLOCK_TICK_RATE, cksrc_sa1100_oscr.shift); - setup_irq(IRQ_OST0, &sa1100_timer_irq); - clocksource_register(&cksrc_sa1100_oscr); + clocksource_register_hz(&cksrc_sa1100_oscr, CLOCK_TICK_RATE); clockevents_register_device(&ckevt_sa1100_osmr0); } diff --git a/arch/arm/mach-tcc8k/time.c b/arch/arm/mach-tcc8k/time.c index 78d06008841..e0a8d609afe 100644 --- a/arch/arm/mach-tcc8k/time.c +++ b/arch/arm/mach-tcc8k/time.c @@ -35,7 +35,6 @@ static struct clocksource clocksource_tcc = { .rating = 200, .read = tcc_get_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 28, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -103,9 +102,7 @@ static int __init tcc_clockevent_init(struct clk *clock) { unsigned int c = clk_get_rate(clock); - clocksource_tcc.mult = clocksource_hz2mult(c, - clocksource_tcc.shift); - clocksource_register(&clocksource_tcc); + clocksource_register_hz(&clocksource_tcc, c); clockevent_tcc.mult = div_sc(c, NSEC_PER_SEC, clockevent_tcc.shift); diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c index 9057d6fd1d3..7b8ad1f98f4 100644 --- a/arch/arm/mach-tegra/timer.c +++ b/arch/arm/mach-tegra/timer.c @@ -18,6 +18,7 @@ */ #include <linux/init.h> +#include <linux/sched.h> #include <linux/time.h> #include <linux/interrupt.h> #include <linux/irq.h> @@ -25,10 +26,10 @@ #include <linux/clocksource.h> #include <linux/clk.h> #include <linux/io.h> -#include <linux/cnt32_to_63.h> #include <asm/mach/time.h> #include <asm/localtimer.h> +#include <asm/sched_clock.h> #include <mach/iomap.h> #include <mach/irqs.h> @@ -91,7 +92,7 @@ static void tegra_timer_set_mode(enum clock_event_mode mode, static cycle_t tegra_clocksource_read(struct clocksource *cs) { - return cnt32_to_63(timer_readl(TIMERUS_CNTR_1US)); + return timer_readl(TIMERUS_CNTR_1US); } static struct clock_event_device tegra_clockevent = { @@ -106,14 +107,29 @@ static struct clocksource tegra_clocksource = { .name = "timer_us", .rating = 300, .read = tegra_clocksource_read, - .mask = 0x7FFFFFFFFFFFFFFFULL, + .mask = CLOCKSOURCE_MASK(32), .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -unsigned long long sched_clock(void) +static DEFINE_CLOCK_DATA(cd); + +/* + * Constants generated by clocks_calc_mult_shift(m, s, 1MHz, NSEC_PER_SEC, 60). + * This gives a resolution of about 1us and a wrap period of about 1h11min. + */ +#define SC_MULT 4194304000u +#define SC_SHIFT 22 + +unsigned long long notrace sched_clock(void) { - return clocksource_cyc2ns(tegra_clocksource.read(&tegra_clocksource), - tegra_clocksource.mult, tegra_clocksource.shift); + u32 cyc = timer_readl(TIMERUS_CNTR_1US); + return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); +} + +static void notrace tegra_update_sched_clock(void) +{ + u32 cyc = timer_readl(TIMERUS_CNTR_1US); + update_sched_clock(&cd, cyc, (u32)~0); } static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id) @@ -158,6 +174,9 @@ static void __init tegra_init_timer(void) WARN(1, "Unknown clock rate"); } + init_fixed_sched_clock(&cd, tegra_update_sched_clock, 32, + 1000000, SC_MULT, SC_SHIFT); + if (clocksource_register_hz(&tegra_clocksource, 1000000)) { printk(KERN_ERR "Failed to register clocksource\n"); BUG(); diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 3fc4472719b..3ec58bd2d6e 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -9,6 +9,7 @@ * Author: Linus Walleij <linus.walleij@stericsson.com> */ #include <linux/interrupt.h> +#include <linux/sched.h> #include <linux/time.h> #include <linux/timex.h> #include <linux/clockchips.h> @@ -21,6 +22,7 @@ #include <mach/hardware.h> /* Generic stuff */ +#include <asm/sched_clock.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> @@ -352,12 +354,18 @@ static struct clocksource clocksource_u300_1mhz = { * this wraps around for now, since it is just a relative time * stamp. (Inspired by OMAP implementation.) */ +static DEFINE_CLOCK_DATA(cd); + unsigned long long notrace sched_clock(void) { - return clocksource_cyc2ns(clocksource_u300_1mhz.read( - &clocksource_u300_1mhz), - clocksource_u300_1mhz.mult, - clocksource_u300_1mhz.shift); + u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +static void notrace u300_update_sched_clock(void) +{ + u32 cyc = readl(U300_TIMER_APP_VBASE + U300_TIMER_APP_GPT2CC); + update_sched_clock(&cd, cyc, (u32)~0); } @@ -375,6 +383,8 @@ static void __init u300_timer_init(void) clk_enable(clk); rate = clk_get_rate(clk); + init_sched_clock(&cd, u300_update_sched_clock, 32, rate); + /* * Disable the "OS" and "DD" timers - these are designed for Symbian! * Example usage in cnh1601578 cpu subsystem pd_timer_app.c @@ -412,9 +422,7 @@ static void __init u300_timer_init(void) writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE, U300_TIMER_APP_VBASE + U300_TIMER_APP_EGPT2); - clocksource_calc_mult_shift(&clocksource_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - if (clocksource_register(&clocksource_u300_1mhz)) + if (clocksource_register_hz(&clocksource_u300_1mhz, rate)) printk(KERN_ERR "timer: failed to initialize clock " "source %s\n", clocksource_u300_1mhz.name); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 6b93bd60027..40a024c71e4 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -51,6 +51,8 @@ #include <mach/platform.h> #include <asm/hardware/timer-sp.h> +#include <plat/sched_clock.h> + #include "core.h" /* @@ -886,6 +888,12 @@ void __init versatile_init(void) } /* + * The sched_clock counter + */ +#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + \ + VERSATILE_SYS_24MHz_OFFSET) + +/* * Where is the timer (VA)? */ #define TIMER0_VA_BASE __io_address(VERSATILE_TIMER0_1_BASE) @@ -900,6 +908,8 @@ static void __init versatile_timer_init(void) { u32 val; + versatile_sched_clock_init(REFCOUNTER, 24000000); + /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 91ff2e0df85..de13603dc02 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -18,11 +18,12 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <asm/hardware/arm_timer.h> +#include <asm/hardware/timer-sp.h> #include <mach/clkdev.h> #include <mach/motherboard.h> -#include <asm/hardware/timer-sp.h> +#include <plat/sched_clock.h> #include "core.h" @@ -50,6 +51,8 @@ void __init v2m_map_io(struct map_desc *tile, size_t num) static void __init v2m_timer_init(void) { + versatile_sched_clock_init(MMIO_P2V(V2M_SYS_24MHZ), 24000000); + writel(0, MMIO_P2V(V2M_TIMER0) + TIMER_CTRL); writel(0, MMIO_P2V(V2M_TIMER1) + TIMER_CTRL); diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c index b80f769bc13..4b089cb930d 100644 --- a/arch/arm/mach-w90x900/time.c +++ b/arch/arm/mach-w90x900/time.c @@ -153,7 +153,6 @@ static struct clocksource clocksource_nuc900 = { .rating = 200, .read = nuc900_get_cycles, .mask = CLOCKSOURCE_MASK(TDR_SHIFT), - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -176,9 +175,7 @@ static void __init nuc900_clocksource_init(void) val |= (COUNTEN | PERIOD | PRESCALE); __raw_writel(val, REG_TCSR1); - clocksource_nuc900.mult = - clocksource_khz2mult((rate / 1000), clocksource_nuc900.shift); - clocksource_register(&clocksource_nuc900); + clocksource_register_hz(&clocksource_nuc900, rate); } static void __init nuc900_timer_init(void) diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c index 558cdfaf76b..07f23bb42be 100644 --- a/arch/arm/plat-iop/time.c +++ b/arch/arm/plat-iop/time.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/time.h> #include <linux/init.h> +#include <linux/sched.h> #include <linux/timex.h> #include <linux/sched.h> #include <linux/io.h> @@ -24,6 +25,7 @@ #include <linux/clockchips.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/sched_clock.h> #include <asm/uaccess.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -50,15 +52,21 @@ static struct clocksource iop_clocksource = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static DEFINE_CLOCK_DATA(cd); + /* * IOP sched_clock() implementation via its clocksource. */ -unsigned long long sched_clock(void) +unsigned long long notrace sched_clock(void) { - cycle_t cyc = iop_clocksource_read(NULL); - struct clocksource *cs = &iop_clocksource; + u32 cyc = 0xffffffffu - read_tcr1(); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} - return clocksource_cyc2ns(cyc, cs->mult, cs->shift); +static void notrace iop_update_sched_clock(void) +{ + u32 cyc = 0xffffffffu - read_tcr1(); + update_sched_clock(&cd, cyc, (u32)~0); } /* @@ -88,6 +96,7 @@ static void iop_set_mode(enum clock_event_mode mode, case CLOCK_EVT_MODE_PERIODIC: write_tmr0(tmr & ~IOP_TMR_EN); write_tcr0(ticks_per_jiffy - 1); + write_trr0(ticks_per_jiffy - 1); tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN); break; case CLOCK_EVT_MODE_ONESHOT: @@ -143,6 +152,8 @@ void __init iop_init_time(unsigned long tick_rate) { u32 timer_ctl; + init_sched_clock(&cd, iop_update_sched_clock, 32, tick_rate); + ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ); iop_tick_rate = tick_rate; @@ -153,6 +164,7 @@ void __init iop_init_time(unsigned long tick_rate) * Set up interrupting clockevent timer 0. */ write_tmr0(timer_ctl & ~IOP_TMR_EN); + write_tisr(1); setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq); clockevents_calc_mult_shift(&iop_clockevent, tick_rate, IOP_MIN_RANGE); @@ -162,9 +174,6 @@ void __init iop_init_time(unsigned long tick_rate) clockevent_delta2ns(0xf, &iop_clockevent); iop_clockevent.cpumask = cpumask_of(0); clockevents_register_device(&iop_clockevent); - write_trr0(ticks_per_jiffy - 1); - write_tcr0(ticks_per_jiffy - 1); - write_tmr0(timer_ctl); /* * Set up free-running clocksource timer 1. @@ -172,7 +181,5 @@ void __init iop_init_time(unsigned long tick_rate) write_trr1(0xffffffff); write_tcr1(0xffffffff); write_tmr1(timer_ctl); - clocksource_calc_mult_shift(&iop_clocksource, tick_rate, - IOP_MIN_RANGE); - clocksource_register(&iop_clocksource); + clocksource_register_hz(&iop_clocksource, tick_rate); } diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index ee9582f4972..d69d343ff61 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -93,7 +93,6 @@ static struct clocksource clocksource_epit = { .rating = 200, .read = epit_read, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -101,9 +100,7 @@ static int __init epit_clocksource_init(struct clk *timer_clk) { unsigned int c = clk_get_rate(timer_clk); - clocksource_epit.mult = clocksource_hz2mult(c, - clocksource_epit.shift); - clocksource_register(&clocksource_epit); + clocksource_register_hz(&clocksource_epit, c); return 0; } diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index f9a1b059a76..9f0c2610595 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -120,7 +120,6 @@ static struct clocksource clocksource_mxc = { .rating = 200, .read = mx1_2_get_cycles, .mask = CLOCKSOURCE_MASK(32), - .shift = 20, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -131,9 +130,7 @@ static int __init mxc_clocksource_init(struct clk *timer_clk) if (timer_is_v2()) clocksource_mxc.read = v2_get_cycles; - clocksource_mxc.mult = clocksource_hz2mult(c, - clocksource_mxc.shift); - clocksource_register(&clocksource_mxc); + clocksource_register_hz(&clocksource_mxc, c); return 0; } diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig index 5da3f97c537..187f4e84bb2 100644 --- a/arch/arm/plat-nomadik/Kconfig +++ b/arch/arm/plat-nomadik/Kconfig @@ -14,6 +14,7 @@ if PLAT_NOMADIK config HAS_MTU bool + select HAVE_SCHED_CLOCK help Support for Multi Timer Unit. MTU provides access to multiple interrupt generating programmable diff --git a/arch/arm/plat-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c index 63cdc6025bd..41723402006 100644 --- a/arch/arm/plat-nomadik/timer.c +++ b/arch/arm/plat-nomadik/timer.c @@ -17,9 +17,9 @@ #include <linux/clk.h> #include <linux/jiffies.h> #include <linux/err.h> -#include <linux/cnt32_to_63.h> -#include <linux/timer.h> +#include <linux/sched.h> #include <asm/mach/time.h> +#include <asm/sched_clock.h> #include <plat/mtu.h> @@ -52,81 +52,24 @@ static struct clocksource nmdk_clksrc = { * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. - * - * Because the hardware timer period may be quite short - * (32.3 secs on the 133 MHz MTU timer selection on ux500) - * and because cnt32_to_63() needs to be called at least once per - * half period to work properly, a kernel keepwarm() timer is set up - * to ensure this requirement is always met. - * - * Also the sched_clock timer will wrap around at some point, - * here we set it to run continously for a year. */ -#define SCHED_CLOCK_MIN_WRAP 3600*24*365 -static struct timer_list cnt32_to_63_keepwarm_timer; -static u32 sched_mult; -static u32 sched_shift; +static DEFINE_CLOCK_DATA(cd); unsigned long long notrace sched_clock(void) { - u64 cycles; + u32 cyc; if (unlikely(!mtu_base)) return 0; - cycles = cnt32_to_63(-readl(mtu_base + MTU_VAL(0))); - /* - * sched_mult is guaranteed to be even so will - * shift out bit 63 - */ - return (cycles * sched_mult) >> sched_shift; + cyc = -readl(mtu_base + MTU_VAL(0)); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); } -/* Just kick sched_clock every so often */ -static void cnt32_to_63_keepwarm(unsigned long data) +static void notrace nomadik_update_sched_clock(void) { - mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); - (void) sched_clock(); -} - -/* - * Set up a timer to keep sched_clock():s 32_to_63 algorithm warm - * once in half a 32bit timer wrap interval. - */ -static void __init nmdk_sched_clock_init(unsigned long rate) -{ - u32 v; - unsigned long delta; - u64 days; - - /* Find the apropriate mult and shift factors */ - clocks_calc_mult_shift(&sched_mult, &sched_shift, - rate, NSEC_PER_SEC, SCHED_CLOCK_MIN_WRAP); - /* We need to multiply by an even number to get rid of bit 63 */ - if (sched_mult & 1) - sched_mult++; - - /* Let's see what we get, take max counter and scale it */ - days = (0xFFFFFFFFFFFFFFFFLLU * sched_mult) >> sched_shift; - do_div(days, NSEC_PER_SEC); - do_div(days, (3600*24)); - - pr_info("sched_clock: using %d bits @ %lu Hz wrap in %lu days\n", - (64 - sched_shift), rate, (unsigned long) days); - - /* - * Program a timer to kick us at half 32bit wraparound - * Formula: seconds per wrap = (2^32) / f - */ - v = 0xFFFFFFFFUL / rate; - /* We want half of the wrap time to keep cnt32_to_63 warm */ - v /= 2; - pr_debug("sched_clock: prescaled timer rate: %lu Hz, " - "initialize keepwarm timer every %d seconds\n", rate, v); - /* Convert seconds to jiffies */ - delta = msecs_to_jiffies(v*1000); - setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, delta); - mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + delta)); + u32 cyc = -readl(mtu_base + MTU_VAL(0)); + update_sched_clock(&cd, cyc, (u32)~0); } /* Clockevent device: use one-shot mode */ @@ -222,7 +165,6 @@ void __init nmdk_timer_init(void) } else { cr |= MTU_CRn_PRESCALE_1; } - clocksource_calc_mult_shift(&nmdk_clksrc, rate, MTU_MIN_RANGE); /* Timer 0 is the free running clocksource */ writel(cr, mtu_base + MTU_CR(0)); @@ -233,11 +175,11 @@ void __init nmdk_timer_init(void) /* Now the clock source is ready */ nmdk_clksrc.read = nmdk_read_timer; - if (clocksource_register(&nmdk_clksrc)) + if (clocksource_register_hz(&nmdk_clksrc, rate)) pr_err("timer: failed to initialize clock source %s\n", nmdk_clksrc.name); - nmdk_sched_clock_init(rate); + init_sched_clock(&cd, nomadik_update_sched_clock, 32, rate); /* Timer 1 is used for events */ diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 8722a136f3a..ea4644021fb 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -15,8 +15,11 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/clk.h> -#include <linux/io.h> #include <linux/err.h> +#include <linux/io.h> +#include <linux/sched.h> + +#include <asm/sched_clock.h> #include <plat/common.h> #include <plat/board.h> @@ -45,7 +48,7 @@ static u32 offset_32k __read_mostly; #ifdef CONFIG_ARCH_OMAP16XX -static cycle_t omap16xx_32k_read(struct clocksource *cs) +static cycle_t notrace omap16xx_32k_read(struct clocksource *cs) { return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; } @@ -54,7 +57,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs) #endif #ifdef CONFIG_ARCH_OMAP2420 -static cycle_t omap2420_32k_read(struct clocksource *cs) +static cycle_t notrace omap2420_32k_read(struct clocksource *cs) { return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; } @@ -63,7 +66,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs) #endif #ifdef CONFIG_ARCH_OMAP2430 -static cycle_t omap2430_32k_read(struct clocksource *cs) +static cycle_t notrace omap2430_32k_read(struct clocksource *cs) { return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; } @@ -72,7 +75,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs) #endif #ifdef CONFIG_ARCH_OMAP3 -static cycle_t omap34xx_32k_read(struct clocksource *cs) +static cycle_t notrace omap34xx_32k_read(struct clocksource *cs) { return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; } @@ -81,7 +84,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs) #endif #ifdef CONFIG_ARCH_OMAP4 -static cycle_t omap44xx_32k_read(struct clocksource *cs) +static cycle_t notrace omap44xx_32k_read(struct clocksource *cs) { return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; } @@ -93,7 +96,7 @@ static cycle_t omap44xx_32k_read(struct clocksource *cs) * Kernel assumes that sched_clock can be called early but may not have * things ready yet. */ -static cycle_t omap_32k_read_dummy(struct clocksource *cs) +static cycle_t notrace omap_32k_read_dummy(struct clocksource *cs) { return 0; } @@ -103,7 +106,6 @@ static struct clocksource clocksource_32k = { .rating = 250, .read = omap_32k_read_dummy, .mask = CLOCKSOURCE_MASK(32), - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -111,10 +113,25 @@ static struct clocksource clocksource_32k = { * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. */ -unsigned long long sched_clock(void) +static DEFINE_CLOCK_DATA(cd); + +/* + * Constants generated by clocks_calc_mult_shift(m, s, 32768, NSEC_PER_SEC, 60). + * This gives a resolution of about 30us and a wrap period of about 36hrs. + */ +#define SC_MULT 4000000000u +#define SC_SHIFT 17 + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = clocksource_32k.read(&clocksource_32k); + return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); +} + +static void notrace omap_update_sched_clock(void) { - return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k), - clocksource_32k.mult, clocksource_32k.shift); + u32 cyc = clocksource_32k.read(&clocksource_32k); + update_sched_clock(&cd, cyc, (u32)~0); } /** @@ -168,13 +185,13 @@ static int __init omap_init_clocksource_32k(void) if (!IS_ERR(sync_32k_ick)) clk_enable(sync_32k_ick); - clocksource_32k.mult = clocksource_hz2mult(32768, - clocksource_32k.shift); - offset_32k = clocksource_32k.read(&clocksource_32k); - if (clocksource_register(&clocksource_32k)) + if (clocksource_register_hz(&clocksource_32k, 32768)) printk(err, clocksource_32k.name); + + init_fixed_sched_clock(&cd, omap_update_sched_clock, 32, + 32768, SC_MULT, SC_SHIFT); } return 0; } diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c index 715a30177f2..c3da2478b2a 100644 --- a/arch/arm/plat-orion/time.c +++ b/arch/arm/plat-orion/time.c @@ -13,11 +13,11 @@ #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/cnt32_to_63.h> #include <linux/timer.h> #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <asm/sched_clock.h> #include <asm/mach/time.h> #include <mach/bridge-regs.h> #include <mach/hardware.h> @@ -44,52 +44,26 @@ static u32 ticks_per_jiffy; /* * Orion's sched_clock implementation. It has a resolution of - * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days. - * - * Because the hardware timer period is quite short (21 secs if - * 200MHz TCLK) and because cnt32_to_63() needs to be called at - * least once per half period to work properly, a kernel timer is - * set up to ensure this requirement is always met. + * at least 7.5ns (133MHz TCLK). */ -#define TCLK2NS_SCALE_FACTOR 8 - -static unsigned long tclk2ns_scale; +static DEFINE_CLOCK_DATA(cd); -unsigned long long sched_clock(void) +unsigned long long notrace sched_clock(void) { - unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL)); - return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR; + u32 cyc = 0xffffffff - readl(TIMER0_VAL); + return cyc_to_sched_clock(&cd, cyc, (u32)~0); } -static struct timer_list cnt32_to_63_keepwarm_timer; -static void cnt32_to_63_keepwarm(unsigned long data) +static void notrace orion_update_sched_clock(void) { - mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); - (void) sched_clock(); + u32 cyc = 0xffffffff - readl(TIMER0_VAL); + update_sched_clock(&cd, cyc, (u32)~0); } static void __init setup_sched_clock(unsigned long tclk) { - unsigned long long v; - unsigned long data; - - v = NSEC_PER_SEC; - v <<= TCLK2NS_SCALE_FACTOR; - v += tclk/2; - do_div(v, tclk); - /* - * We want an even value to automatically clear the top bit - * returned by cnt32_to_63() without an additional run time - * instruction. So if the LSB is 1 then round it up. - */ - if (v & 1) - v++; - tclk2ns_scale = v; - - data = (0xffffffffUL / tclk / 2 - 2) * HZ; - setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data); - mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data)); + init_sched_clock(&cd, orion_update_sched_clock, 32, tclk); } /* @@ -102,7 +76,6 @@ static cycle_t orion_clksrc_read(struct clocksource *cs) static struct clocksource orion_clksrc = { .name = "orion_clocksource", - .shift = 20, .rating = 300, .read = orion_clksrc_read, .mask = CLOCKSOURCE_MASK(32), @@ -245,8 +218,7 @@ void __init orion_time_init(unsigned int irq, unsigned int tclk) writel(u & ~BRIDGE_INT_TIMER0, BRIDGE_MASK); u = readl(TIMER_CTRL); writel(u | TIMER0_EN | TIMER0_RELOAD_EN, TIMER_CTRL); - orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift); - clocksource_register(&orion_clksrc); + clocksource_register_hz(&orion_clksrc, tclk); /* * Setup clockevent timer (interrupt-driven.) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index ab211652e4c..839c88df999 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -81,8 +81,6 @@ static struct clocksource clksrc = { .rating = 200, /* its a pretty decent clock */ .read = clocksource_read_cycles, .mask = 0xFFFF, /* 16 bits */ - .mult = 0, /* to be computed */ - .shift = 0, /* to be computed */ .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -105,10 +103,8 @@ static void spear_clocksource_init(void) val |= CTRL_ENABLE ; writew(val, gpt_base + CR(CLKSRC)); - clocksource_calc_mult_shift(&clksrc, tick_rate, SPEAR_MIN_RANGE); - /* register the clocksource */ - clocksource_register(&clksrc); + clocksource_register_hz(&clksrc, tick_rate); } static struct clock_event_device clkevt = { diff --git a/arch/arm/plat-stmp3xxx/timer.c b/arch/arm/plat-stmp3xxx/timer.c index 063c7bc0e74..c395630a6ed 100644 --- a/arch/arm/plat-stmp3xxx/timer.c +++ b/arch/arm/plat-stmp3xxx/timer.c @@ -89,7 +89,6 @@ static struct clocksource cksrc_stmp3xxx = { .rating = 250, .read = stmp3xxx_clock_read, .mask = CLOCKSOURCE_MASK(16), - .shift = 10, .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; @@ -106,8 +105,6 @@ static struct irqaction stmp3xxx_timer_irq = { */ static void __init stmp3xxx_init_timer(void) { - cksrc_stmp3xxx.mult = clocksource_hz2mult(CLOCK_TICK_RATE, - cksrc_stmp3xxx.shift); ckevt_timrot.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt_timrot.shift); ckevt_timrot.min_delta_ns = clockevent_delta2ns(2, &ckevt_timrot); @@ -140,7 +137,7 @@ static void __init stmp3xxx_init_timer(void) setup_irq(IRQ_TIMER0, &stmp3xxx_timer_irq); - clocksource_register(&cksrc_stmp3xxx); + clocksource_register_hz(&cksrc_stmp3xxx, CLOCK_TICK_RATE); clockevents_register_device(&ckevt_timrot); } diff --git a/arch/arm/plat-versatile/Makefile b/arch/arm/plat-versatile/Makefile index aaa571d1792..16dde081993 100644 --- a/arch/arm/plat-versatile/Makefile +++ b/arch/arm/plat-versatile/Makefile @@ -1,6 +1,7 @@ obj-y := clock.o -obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o -obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o +ifneq ($(CONFIG_ARCH_INTEGRATOR),y) +obj-y += sched-clock.o +endif ifeq ($(CONFIG_LEDS_CLASS),y) obj-$(CONFIG_ARCH_REALVIEW) += leds.o obj-$(CONFIG_ARCH_VERSATILE) += leds.o diff --git a/arch/arm/plat-versatile/include/plat/sched_clock.h b/arch/arm/plat-versatile/include/plat/sched_clock.h new file mode 100644 index 00000000000..5c3e4fc9fa0 --- /dev/null +++ b/arch/arm/plat-versatile/include/plat/sched_clock.h @@ -0,0 +1,6 @@ +#ifndef ARM_PLAT_SCHED_CLOCK_H +#define ARM_PLAT_SCHED_CLOCK_H + +void versatile_sched_clock_init(void __iomem *, unsigned long); + +#endif diff --git a/arch/arm/plat-versatile/sched-clock.c b/arch/arm/plat-versatile/sched-clock.c index 9768cf7e83d..3d6a4c292ca 100644 --- a/arch/arm/plat-versatile/sched-clock.c +++ b/arch/arm/plat-versatile/sched-clock.c @@ -18,36 +18,41 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/cnt32_to_63.h> #include <linux/io.h> -#include <asm/div64.h> +#include <linux/sched.h> -#include <mach/hardware.h> -#include <mach/platform.h> +#include <asm/sched_clock.h> +#include <plat/sched_clock.h> -#ifdef VERSATILE_SYS_BASE -#define REFCOUNTER (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_24MHz_OFFSET) -#endif - -#ifdef REALVIEW_SYS_BASE -#define REFCOUNTER (__io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_24MHz_OFFSET) -#endif +static DEFINE_CLOCK_DATA(cd); +static void __iomem *ctr; /* - * This is the Realview and Versatile sched_clock implementation. This - * has a resolution of 41.7ns, and a maximum value of about 35583 days. - * - * The return value is guaranteed to be monotonic in that range as - * long as there is always less than 89 seconds between successive - * calls to this function. + * Constants generated by clocks_calc_mult_shift(m, s, 24MHz, NSEC_PER_SEC, 60). + * This gives a resolution of about 41ns and a wrap period of about 178s. */ -unsigned long long sched_clock(void) +#define SC_MULT 2796202667u +#define SC_SHIFT 26 + +unsigned long long notrace sched_clock(void) { - unsigned long long v = cnt32_to_63(readl(REFCOUNTER)); + if (ctr) { + u32 cyc = readl(ctr); + return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, + SC_MULT, SC_SHIFT); + } else + return 0; +} - /* the <<1 gets rid of the cnt_32_to_63 top bit saving on a bic insn */ - v *= 125<<1; - do_div(v, 3<<1); +static void notrace versatile_update_sched_clock(void) +{ + u32 cyc = readl(ctr); + update_sched_clock(&cd, cyc, (u32)~0); +} - return v; +void __init versatile_sched_clock_init(void __iomem *reg, unsigned long rate) +{ + ctr = reg; + init_fixed_sched_clock(&cd, versatile_update_sched_clock, + 32, rate, SC_MULT, SC_SHIFT); } |