diff options
Diffstat (limited to 'arch/arm')
41 files changed, 1888 insertions, 749 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index d571cdb79d8..4d1c3093a13 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -798,6 +798,7 @@ config ARCH_U8500 select GENERIC_CLOCKEVENTS select COMMON_CLKDEV select ARCH_REQUIRE_GPIOLIB + select ARCH_HAS_CPUFREQ help Support for ST-Ericsson's Ux500 architecture diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 9e27a84433c..12052e8e064 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,14 +2,16 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := clock.o cpu.o devices.o -obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o devices-db5500.o +obj-y := clock.o cpu.o devices.o devices-common.o +obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o -obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o -obj-$(CONFIG_MACH_U5500) += board-u5500.o +obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \ + board-mop500-keypads.o +obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o -obj-$(CONFIG_U5500_MODEM_IRQ) += modem_irq.o -obj-$(CONFIG_U5500_MBOX) += mbox.o +obj-$(CONFIG_U5500_MODEM_IRQ) += modem-irq-db5500.o +obj-$(CONFIG_U5500_MBOX) += mbox-db5500.o +obj-$(CONFIG_CPU_FREQ) += cpufreq.o diff --git a/arch/arm/mach-ux500/board-mop500-keypads.c b/arch/arm/mach-ux500/board-mop500-keypads.c new file mode 100644 index 00000000000..70318c354d3 --- /dev/null +++ b/arch/arm/mach-ux500/board-mop500-keypads.c @@ -0,0 +1,229 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Keypad layouts for various boards + */ + +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mfd/stmpe.h> +#include <linux/mfd/tc3589x.h> +#include <linux/input/matrix_keypad.h> + +#include <plat/pincfg.h> +#include <plat/ske.h> + +#include <mach/devices.h> +#include <mach/hardware.h> + +#include "devices-db8500.h" +#include "board-mop500.h" + +/* STMPE/SKE keypad use this key layout */ +static const unsigned int mop500_keymap[] = { + KEY(2, 5, KEY_END), + KEY(4, 1, KEY_POWER), + KEY(3, 5, KEY_VOLUMEDOWN), + KEY(1, 3, KEY_3), + KEY(5, 2, KEY_RIGHT), + KEY(5, 0, KEY_9), + + KEY(0, 5, KEY_MENU), + KEY(7, 6, KEY_ENTER), + KEY(4, 5, KEY_0), + KEY(6, 7, KEY_2), + KEY(3, 4, KEY_UP), + KEY(3, 3, KEY_DOWN), + + KEY(6, 4, KEY_SEND), + KEY(6, 2, KEY_BACK), + KEY(4, 2, KEY_VOLUMEUP), + KEY(5, 5, KEY_1), + KEY(4, 3, KEY_LEFT), + KEY(3, 2, KEY_7), +}; + +static const struct matrix_keymap_data mop500_keymap_data = { + .keymap = mop500_keymap, + .keymap_size = ARRAY_SIZE(mop500_keymap), +}; + +/* + * Nomadik SKE keypad + */ +#define ROW_PIN_I0 164 +#define ROW_PIN_I1 163 +#define ROW_PIN_I2 162 +#define ROW_PIN_I3 161 +#define ROW_PIN_I4 156 +#define ROW_PIN_I5 155 +#define ROW_PIN_I6 154 +#define ROW_PIN_I7 153 +#define COL_PIN_O0 168 +#define COL_PIN_O1 167 +#define COL_PIN_O2 166 +#define COL_PIN_O3 165 +#define COL_PIN_O4 160 +#define COL_PIN_O5 159 +#define COL_PIN_O6 158 +#define COL_PIN_O7 157 + +#define SKE_KPD_MAX_ROWS 8 +#define SKE_KPD_MAX_COLS 8 + +static int ske_kp_rows[] = { + ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, + ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, +}; + +/* + * ske_set_gpio_row: request and set gpio rows + */ +static int ske_set_gpio_row(int gpio) +{ + int ret; + + ret = gpio_request(gpio, "ske-kp"); + if (ret < 0) { + pr_err("ske_set_gpio_row: gpio request failed\n"); + return ret; + } + + ret = gpio_direction_output(gpio, 1); + if (ret < 0) { + pr_err("ske_set_gpio_row: gpio direction failed\n"); + gpio_free(gpio); + } + + return ret; +} + +/* + * ske_kp_init - enable the gpio configuration + */ +static int ske_kp_init(void) +{ + int ret, i; + + for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { + ret = ske_set_gpio_row(ske_kp_rows[i]); + if (ret < 0) { + pr_err("ske_kp_init: failed init\n"); + return ret; + } + } + + return 0; +} + +static struct ske_keypad_platform_data ske_keypad_board = { + .init = ske_kp_init, + .keymap_data = &mop500_keymap_data, + .no_autorepeat = true, + .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ + .kcol = SKE_KPD_MAX_COLS, + .debounce_ms = 40, /* in millisecs */ +}; + +/* + * STMPE1601 + */ +static struct stmpe_keypad_platform_data stmpe1601_keypad_data = { + .debounce_ms = 64, + .scan_count = 8, + .no_autorepeat = true, + .keymap_data = &mop500_keymap_data, +}; + +static struct stmpe_platform_data stmpe1601_data = { + .id = 1, + .blocks = STMPE_BLOCK_KEYPAD, + .irq_trigger = IRQF_TRIGGER_FALLING, + .irq_base = MOP500_STMPE1601_IRQ(0), + .keypad = &stmpe1601_keypad_data, + .autosleep = true, + .autosleep_timeout = 1024, +}; + +static struct i2c_board_info mop500_i2c0_devices_stuib[] = { + { + I2C_BOARD_INFO("stmpe1601", 0x40), + .irq = NOMADIK_GPIO_TO_IRQ(218), + .platform_data = &stmpe1601_data, + .flags = I2C_CLIENT_WAKE, + }, +}; + +/* + * TC35893 + */ + +static const unsigned int uib_keymap[] = { + KEY(3, 1, KEY_END), + KEY(4, 1, KEY_POWER), + KEY(6, 4, KEY_VOLUMEDOWN), + KEY(4, 2, KEY_EMAIL), + KEY(3, 3, KEY_RIGHT), + KEY(2, 5, KEY_BACKSPACE), + + KEY(6, 7, KEY_MENU), + KEY(5, 0, KEY_ENTER), + KEY(4, 3, KEY_0), + KEY(3, 4, KEY_DOT), + KEY(5, 2, KEY_UP), + KEY(3, 5, KEY_DOWN), + + KEY(4, 5, KEY_SEND), + KEY(0, 5, KEY_BACK), + KEY(6, 2, KEY_VOLUMEUP), + KEY(1, 3, KEY_SPACE), + KEY(7, 6, KEY_LEFT), + KEY(5, 5, KEY_SEARCH), +}; + +static struct matrix_keymap_data uib_keymap_data = { + .keymap = uib_keymap, + .keymap_size = ARRAY_SIZE(uib_keymap), +}; + +static struct tc3589x_keypad_platform_data tc35893_data = { + .krow = TC_KPD_ROWS, + .kcol = TC_KPD_COLUMNS, + .debounce_period = TC_KPD_DEBOUNCE_PERIOD, + .settle_time = TC_KPD_SETTLE_TIME, + .irqtype = IRQF_TRIGGER_FALLING, + .enable_wakeup = true, + .keymap_data = &uib_keymap_data, + .no_autorepeat = true, +}; + +static struct tc3589x_platform_data tc3589x_keypad_data = { + .block = TC3589x_BLOCK_KEYPAD, + .keypad = &tc35893_data, + .irq_base = MOP500_EGPIO_IRQ_BASE, +}; + +static struct i2c_board_info mop500_i2c0_devices_uib[] = { + { + I2C_BOARD_INFO("tc3589x", 0x44), + .platform_data = &tc3589x_keypad_data, + .irq = NOMADIK_GPIO_TO_IRQ(218), + .flags = I2C_CLIENT_WAKE, + }, +}; + +void mop500_keypad_init(void) +{ + db8500_add_ske_keypad(&ske_keypad_board); + + i2c_register_board_info(0, mop500_i2c0_devices_stuib, + ARRAY_SIZE(mop500_i2c0_devices_stuib)); + + i2c_register_board_info(0, mop500_i2c0_devices_uib, + ARRAY_SIZE(mop500_i2c0_devices_uib)); + +} diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index bac995665b5..4b996676594 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -16,10 +16,24 @@ #include <mach/devices.h> #include <mach/hardware.h> +#include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" static pin_cfg_t mop500_sdi_pins[] = { + /* SDI0 (MicroSD slot) */ + GPIO18_MC0_CMDDIR, + GPIO19_MC0_DAT0DIR, + GPIO20_MC0_DAT2DIR, + GPIO21_MC0_DAT31DIR, + GPIO22_MC0_FBCLK, + GPIO23_MC0_CLK, + GPIO24_MC0_CMD, + GPIO25_MC0_DAT0, + GPIO26_MC0_DAT1, + GPIO27_MC0_DAT2, + GPIO28_MC0_DAT3, + /* SDI4 (on-board eMMC) */ GPIO197_MC4_DAT3, GPIO198_MC4_DAT2, @@ -50,6 +64,55 @@ static pin_cfg_t mop500_sdi2_pins[] = { }; /* + * SDI 0 (MicroSD slot) + */ + +/* MMCIPOWER bits */ +#define MCI_DATA2DIREN (1 << 2) +#define MCI_CMDDIREN (1 << 3) +#define MCI_DATA0DIREN (1 << 4) +#define MCI_DATA31DIREN (1 << 5) +#define MCI_FBCLKEN (1 << 7) + +static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, + unsigned char power_mode) +{ + if (power_mode == MMC_POWER_UP) + gpio_set_value_cansleep(GPIO_SDMMC_EN, 1); + else if (power_mode == MMC_POWER_OFF) + gpio_set_value_cansleep(GPIO_SDMMC_EN, 0); + + return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | + MCI_DATA2DIREN | MCI_DATA31DIREN; +} + +static struct mmci_platform_data mop500_sdi0_data = { + .vdd_handler = mop500_sdi0_vdd_handler, + .ocr_mask = MMC_VDD_29_30, + .f_max = 100000000, + .capabilities = MMC_CAP_4_BIT_DATA, + .gpio_cd = GPIO_SDMMC_CD, + .gpio_wp = -1, +}; + +void mop500_sdi_tc35892_init(void) +{ + int ret; + + ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN"); + if (!ret) + ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL, + "GPIO_SDMMC_1V8_3V_SEL"); + if (ret) + return; + + gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 1); + gpio_direction_output(GPIO_SDMMC_EN, 0); + + db8500_add_sdi0(&mop500_sdi0_data); +} + +/* * SDI 2 (POP eMMC, not on DB8500ed) */ @@ -74,18 +137,24 @@ static struct mmci_platform_data mop500_sdi4_data = { .gpio_wp = -1, }; -void mop500_sdi_init(void) +void __init mop500_sdi_init(void) { nmk_config_pins(mop500_sdi_pins, ARRAY_SIZE(mop500_sdi_pins)); - u8500_sdi2_device.dev.platform_data = &mop500_sdi2_data; - u8500_sdi4_device.dev.platform_data = &mop500_sdi4_data; + /* + * sdi0 will finally be added when the TC35892 initializes and calls + * mop500_sdi_tc35892_init() above. + */ + /* PoP:ed eMMC */ if (!cpu_is_u8500ed()) { nmk_config_pins(mop500_sdi2_pins, ARRAY_SIZE(mop500_sdi2_pins)); - amba_device_register(&u8500_sdi2_device, &iomem_resource); + /* POP eMMC on v1.0 has problems with high speed */ + if (!cpu_is_u8500v10()) + mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; + db8500_add_sdi2(&mop500_sdi2_data); } /* On-board eMMC */ - amba_device_register(&u8500_sdi4_device, &iomem_resource); + db8500_add_sdi4(&mop500_sdi4_data); } diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index cac83a69488..a1c9ea1a66d 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -13,25 +13,26 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/i2c.h> #include <linux/gpio.h> #include <linux/amba/bus.h> #include <linux/amba/pl022.h> #include <linux/spi/spi.h> #include <linux/mfd/ab8500.h> -#include <linux/input/matrix_keypad.h> +#include <linux/mfd/tc3589x.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <plat/pincfg.h> #include <plat/i2c.h> -#include <plat/ske.h> #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> #include <mach/irqs.h> +#include "devices-db8500.h" #include "pins-db8500.h" #include "board-mop500.h" @@ -69,22 +70,12 @@ static pin_cfg_t mop500_pins[] = { GPIO166_KP_O2, GPIO167_KP_O1, GPIO168_KP_O0, -}; -static void ab4500_spi_cs_control(u32 command) -{ - /* set the FRM signal, which is CS - TODO */ -} + /* GPIO_EXP_INT */ + GPIO217_GPIO, -struct pl022_config_chip ab4500_chip_info = { - .com_mode = INTERRUPT_TRANSFER, - .iface = SSP_INTERFACE_MOTOROLA_SPI, - /* we can act as master only */ - .hierarchy = SSP_MASTER, - .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .cs_control = ab4500_spi_cs_control, + /* STMPE1601 IRQ */ + GPIO218_GPIO | PIN_INPUT_PULLUP, }; static struct ab8500_platform_data ab8500_platdata = { @@ -93,9 +84,9 @@ static struct ab8500_platform_data ab8500_platdata = { static struct resource ab8500_resources[] = { [0] = { - .start = IRQ_AB8500, - .end = IRQ_AB8500, - .flags = IORESOURCE_IRQ + .start = IRQ_DB8500_AB8500, + .end = IRQ_DB8500_AB8500, + .flags = IORESOURCE_IRQ } }; @@ -109,19 +100,6 @@ struct platform_device ab8500_device = { .resource = ab8500_resources, }; -static struct spi_board_info ab8500_spi_devices[] = { - { - .modalias = "ab8500-spi", - .controller_data = &ab4500_chip_info, - .platform_data = &ab8500_platdata, - .max_speed_hz = 12000000, - .bus_num = 0, - .chip_select = 0, - .mode = SPI_MODE_3, - .irq = IRQ_DB8500_AB8500, - }, -}; - static struct pl022_ssp_controller ssp0_platform_data = { .bus_id = 0, /* pl022 not yet supports dma */ @@ -132,6 +110,34 @@ static struct pl022_ssp_controller ssp0_platform_data = { .num_chipselect = 5, }; +/* + * TC35892 + */ + +static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base) +{ + mop500_sdi_tc35892_init(); +} + +static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = { + .gpio_base = MOP500_EGPIO(0), + .setup = mop500_tc35892_init, +}; + +static struct tc3589x_platform_data mop500_tc35892_data = { + .block = TC3589x_BLOCK_GPIO, + .gpio = &mop500_tc35892_gpio_data, + .irq_base = MOP500_EGPIO_IRQ_BASE, +}; + +static struct i2c_board_info mop500_i2c0_devices[] = { + { + I2C_BOARD_INFO("tc3589x", 0x42), + .irq = NOMADIK_GPIO_TO_IRQ(217), + .platform_data = &mop500_tc35892_data, + }, +}; + #define U8500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ static struct nmk_i2c_controller u8500_i2c##id##_data = { \ /* \ @@ -161,159 +167,49 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(2, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); U8500_I2C_CONTROLLER(3, 0xe, 1, 1, 100000, I2C_FREQ_MODE_STANDARD); -static struct amba_device *amba_devs[] __initdata = { - &ux500_uart0_device, - &ux500_uart1_device, - &ux500_uart2_device, - &u8500_ssp0_device, -}; - -static const unsigned int ux500_keymap[] = { - KEY(2, 5, KEY_END), - KEY(4, 1, KEY_POWER), - KEY(3, 5, KEY_VOLUMEDOWN), - KEY(1, 3, KEY_3), - KEY(5, 2, KEY_RIGHT), - KEY(5, 0, KEY_9), - - KEY(0, 5, KEY_MENU), - KEY(7, 6, KEY_ENTER), - KEY(4, 5, KEY_0), - KEY(6, 7, KEY_2), - KEY(3, 4, KEY_UP), - KEY(3, 3, KEY_DOWN), - - KEY(6, 4, KEY_SEND), - KEY(6, 2, KEY_BACK), - KEY(4, 2, KEY_VOLUMEUP), - KEY(5, 5, KEY_1), - KEY(4, 3, KEY_LEFT), - KEY(3, 2, KEY_7), -}; - -static const struct matrix_keymap_data ux500_keymap_data = { - .keymap = ux500_keymap, - .keymap_size = ARRAY_SIZE(ux500_keymap), -}; +static void __init mop500_i2c_init(void) +{ + db8500_add_i2c0(&u8500_i2c0_data); + db8500_add_i2c1(&u8500_i2c1_data); + db8500_add_i2c2(&u8500_i2c2_data); + db8500_add_i2c3(&u8500_i2c3_data); +} -/* - * Nomadik SKE keypad - */ -#define ROW_PIN_I0 164 -#define ROW_PIN_I1 163 -#define ROW_PIN_I2 162 -#define ROW_PIN_I3 161 -#define ROW_PIN_I4 156 -#define ROW_PIN_I5 155 -#define ROW_PIN_I6 154 -#define ROW_PIN_I7 153 -#define COL_PIN_O0 168 -#define COL_PIN_O1 167 -#define COL_PIN_O2 166 -#define COL_PIN_O3 165 -#define COL_PIN_O4 160 -#define COL_PIN_O5 159 -#define COL_PIN_O6 158 -#define COL_PIN_O7 157 - -#define SKE_KPD_MAX_ROWS 8 -#define SKE_KPD_MAX_COLS 8 - -static int ske_kp_rows[] = { - ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3, - ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7, +/* add any platform devices here - TODO */ +static struct platform_device *platform_devs[] __initdata = { }; -/* - * ske_set_gpio_row: request and set gpio rows - */ -static int ske_set_gpio_row(int gpio) +static void __init mop500_spi_init(void) { - int ret; - - ret = gpio_request(gpio, "ske-kp"); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio request failed\n"); - return ret; - } - - ret = gpio_direction_output(gpio, 1); - if (ret < 0) { - pr_err("ske_set_gpio_row: gpio direction failed\n"); - gpio_free(gpio); - } - - return ret; + db8500_add_ssp0(&ssp0_platform_data); } -/* - * ske_kp_init - enable the gpio configuration - */ -static int ske_kp_init(void) +static void __init mop500_uart_init(void) { - int ret, i; - - for (i = 0; i < SKE_KPD_MAX_ROWS; i++) { - ret = ske_set_gpio_row(ske_kp_rows[i]); - if (ret < 0) { - pr_err("ske_kp_init: failed init\n"); - return ret; - } - } - - return 0; + db8500_add_uart0(); + db8500_add_uart1(); + db8500_add_uart2(); } -static struct ske_keypad_platform_data ske_keypad_board = { - .init = ske_kp_init, - .keymap_data = &ux500_keymap_data, - .no_autorepeat = true, - .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */ - .kcol = SKE_KPD_MAX_COLS, - .debounce_ms = 40, /* in millsecs */ -}; - - - -/* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { - &u8500_i2c0_device, - &ux500_i2c1_device, - &ux500_i2c2_device, - &ux500_i2c3_device, - &ux500_ske_keypad_device, -}; - static void __init u8500_init_machine(void) { - int i; - u8500_init_devices(); nmk_config_pins(mop500_pins, ARRAY_SIZE(mop500_pins)); - u8500_i2c0_device.dev.platform_data = &u8500_i2c0_data; - ux500_i2c1_device.dev.platform_data = &u8500_i2c1_data; - ux500_i2c2_device.dev.platform_data = &u8500_i2c2_data; - ux500_i2c3_device.dev.platform_data = &u8500_i2c3_data; - ux500_ske_keypad_device.dev.platform_data = &ske_keypad_board; - - u8500_ssp0_device.dev.platform_data = &ssp0_platform_data; - - /* Register the active AMBA devices on this board */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + mop500_i2c_init(); mop500_sdi_init(); + mop500_spi_init(); + mop500_uart_init(); + + mop500_keypad_init(); + + platform_device_register(&ab8500_device); - /* If HW is early drop (ED) or V1.0 then use SPI to access AB8500 */ - if (cpu_is_u8500ed() || cpu_is_u8500v10()) - spi_register_board_info(ab8500_spi_devices, - ARRAY_SIZE(ab8500_spi_devices)); - else /* If HW is v.1.1 or later use I2C to access AB8500 */ - platform_device_register(&ab8500_device); + i2c_register_board_info(0, mop500_i2c0_devices, + ARRAY_SIZE(mop500_i2c0_devices)); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 2d240322fa6..3104ae2a02c 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,15 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x)) + +/* GPIOs on the TC35892 expander */ +#define GPIO_SDMMC_CD MOP500_EGPIO(3) +#define GPIO_SDMMC_EN MOP500_EGPIO(17) +#define GPIO_SDMMC_1V8_3V_SEL MOP500_EGPIO(18) + extern void mop500_sdi_init(void); +extern void mop500_sdi_tc35892_init(void); +extern void mop500_keypad_init(void); #endif diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c new file mode 100644 index 00000000000..54712acc039 --- /dev/null +++ b/arch/arm/mach-ux500/board-u5500-sdi.c @@ -0,0 +1,49 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Hanumath Prasad <ulf.hansson@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/amba/mmci.h> +#include <linux/mmc/host.h> +#include <linux/gpio.h> + +#include <plat/pincfg.h> +#include <mach/db5500-regs.h> +#include <plat/ste_dma40.h> + +#include "pins-db5500.h" +#include "devices-db5500.h" +#include "ste-dma40-db5500.h" + +static pin_cfg_t u5500_sdi_pins[] = { + /* SDI0 (POP eMMC) */ + GPIO5_MC0_DAT0 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO6_MC0_DAT1 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO7_MC0_DAT2 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO8_MC0_DAT3 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO9_MC0_DAT4 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO10_MC0_DAT5 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO11_MC0_DAT6 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO12_MC0_DAT7 | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO13_MC0_CMD | PIN_DIR_INPUT | PIN_PULL_UP, + GPIO14_MC0_CLK | PIN_DIR_OUTPUT | PIN_VAL_LOW, +}; + +static struct mmci_platform_data u5500_sdi0_data = { + .ocr_mask = MMC_VDD_165_195, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED, + .gpio_cd = -1, + .gpio_wp = -1, +}; + +void __init u5500_sdi_init(void) +{ + nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins)); + + db5500_add_sdi0(&u5500_sdi0_data); +} diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 1ca094a45e7..39d370c1f3b 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -9,6 +9,7 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> #include <linux/gpio.h> +#include <linux/irq.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -17,20 +18,24 @@ #include <mach/devices.h> #include <mach/setup.h> -static struct amba_device *amba_board_devs[] __initdata = { - &ux500_uart0_device, - &ux500_uart1_device, - &ux500_uart2_device, -}; +#include "devices-db5500.h" + +static void __init u5500_uart_init(void) +{ + db5500_add_uart0(); + db5500_add_uart1(); + db5500_add_uart2(); +} static void __init u5500_init_machine(void) { u5500_init_devices(); - amba_add_devices(amba_board_devs, ARRAY_SIZE(amba_board_devs)); + u5500_sdi_init(); + u5500_uart_init(); } -MACHINE_START(U8500, "ST-Ericsson U5500 Platform") +MACHINE_START(U5500, "ST-Ericsson U5500 Platform") .boot_params = 0x00000100, .map_io = u5500_map_io, .init_irq = ux500_init_irq, diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 1675047daf2..912d1cc18c5 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -20,6 +20,12 @@ #include <mach/hardware.h> #include "clock.h" +#ifdef CONFIG_DEBUG_FS +#include <linux/debugfs.h> +#include <linux/uaccess.h> /* for copy_from_user */ +static LIST_HEAD(clk_list); +#endif + #define PRCC_PCKEN 0x00 #define PRCC_PCKDIS 0x04 #define PRCC_KCKEN 0x08 @@ -133,7 +139,7 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) { void __iomem *addr = __io_address(UX500_PRCMU_BASE) + PRCM_TCR; - u32 tcr = readl(addr); + u32 tcr; int mtu = (int) clk->data; /* * One of these is selected eventually @@ -144,6 +150,14 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) unsigned long mturate; unsigned long retclk; + /* + * On a startup, always conifgure the TCR to the doze mode; + * bootloaders do it for us. Do this in the kernel too. + */ + writel(PRCM_TCR_DOZE_MODE, addr); + + tcr = readl(addr); + /* Get the rate from the parent as a default */ if (clk->parent_periph) mturate = clk_get_rate(clk->parent_periph); @@ -153,45 +167,6 @@ static unsigned long clk_mtu_get_rate(struct clk *clk) /* We need to be connected SOMEWHERE */ BUG(); - /* - * Are we in doze mode? - * In this mode the parent peripheral or the fixed 32768 Hz - * clock is fed into the block. - */ - if (!(tcr & PRCM_TCR_DOZE_MODE)) { - /* - * Here we're using the clock input from the APE ULP - * clock domain. But first: are the timers stopped? - */ - if (tcr & PRCM_TCR_STOPPED) { - clk32k = 0; - mturate = 0; - } else { - /* Else default mode: 0 and 2.4 MHz */ - clk32k = 0; - if (cpu_is_u5500()) - /* DB5500 divides by 8 */ - mturate /= 8; - else if (cpu_is_u8500ed()) { - /* - * This clocking setting must not be used - * in the ED chip, it is simply not - * connected anywhere! - */ - mturate = 0; - BUG(); - } else - /* - * In this mode the ulp38m4 clock is divided - * by a factor 16, on the DB8500 typically - * 38400000 / 16 ~ 2.4 MHz. - * TODO: Replace the constant with a reference - * to the ULP source once this is modeled. - */ - mturate = 38400000 / 16; - } - } - /* Return the clock selected for this MTU */ if (tcr & (1 << mtu)) retclk = clk32k; @@ -317,6 +292,7 @@ static struct clkops clk_prcc_ops = { }; static struct clk clk_32khz = { + .name = "clk_32khz", .rate = 32000, }; @@ -366,94 +342,96 @@ static DEFINE_PRCMU_CLK(uiccclk, 0x4, 1, UICCCLK); /* v1 */ */ /* Peripheral Cluster #1 */ -static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, i2c4, 10, 9, &clk_i2cclk); static DEFINE_PRCC_CLK(1, gpio0, 9, -1, NULL); -static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); -static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); -static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); -static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, slimbus0, 8, 8, &clk_slimclk); +static DEFINE_PRCC_CLK(1, spi3_ed, 7, 7, NULL); +static DEFINE_PRCC_CLK(1, spi3_v1, 7, -1, NULL); +static DEFINE_PRCC_CLK(1, i2c2, 6, 6, &clk_i2cclk); static DEFINE_PRCC_CLK(1, sdi0, 5, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); -static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); -static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); -static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); -static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); +static DEFINE_PRCC_CLK(1, msp1_ed, 4, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, msp1_v1, 4, 4, &clk_msp1clk); +static DEFINE_PRCC_CLK(1, msp0, 3, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(1, i2c1, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(1, uart1, 1, 1, &clk_uartclk); +static DEFINE_PRCC_CLK(1, uart0, 0, 0, &clk_uartclk); /* Peripheral Cluster #2 */ static DEFINE_PRCC_CLK(2, gpio1_ed, 12, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); -static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, ssitx_ed, 11, -1, NULL); +static DEFINE_PRCC_CLK(2, ssirx_ed, 10, -1, NULL); +static DEFINE_PRCC_CLK(2, spi0_ed, 9, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_ed, 8, 6, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_ed, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_ed, 6, 4, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_ed, 4, 2, &clk_sdmmcclk); static DEFINE_PRCC_CLK(2, pwl_ed, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(2, spi1_ed, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_ed, 0, 0, &clk_i2cclk); static DEFINE_PRCC_CLK(2, gpio1_v1, 11, -1, NULL); -static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); -static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); -static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); -static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); -static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, ssitx_v1, 10, 7, NULL); +static DEFINE_PRCC_CLK(2, ssirx_v1, 9, 6, NULL); +static DEFINE_PRCC_CLK(2, spi0_v1, 8, -1, NULL); +static DEFINE_PRCC_CLK(2, sdi3_v1, 7, 5, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, sdi1_v1, 6, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(2, msp2_v1, 5, 3, &clk_msp02clk); +static DEFINE_PRCC_CLK(2, sdi4_v1, 4, 2, &clk_sdmmcclk); static DEFINE_PRCC_CLK(2, pwl_v1, 3, 1, NULL); -static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); -static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); -static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(2, spi1_v1, 2, -1, NULL); +static DEFINE_PRCC_CLK(2, spi2_v1, 1, -1, NULL); +static DEFINE_PRCC_CLK(2, i2c3_v1, 0, 0, &clk_i2cclk); /* Peripheral Cluster #3 */ -static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); -static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); -static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); -static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); -static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); -static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); -static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); -static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); +static DEFINE_PRCC_CLK(3, gpio2, 8, -1, NULL); +static DEFINE_PRCC_CLK(3, sdi5, 7, 7, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, uart2, 6, 6, &clk_uartclk); +static DEFINE_PRCC_CLK(3, ske, 5, 5, &clk_32khz); +static DEFINE_PRCC_CLK(3, sdi2, 4, 4, &clk_sdmmcclk); +static DEFINE_PRCC_CLK(3, i2c0, 3, 3, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_ed, 2, 2, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp0_ed, 1, 1, &clk_i2cclk); +static DEFINE_PRCC_CLK(3, ssp1_v1, 2, 2, &clk_sspclk); +static DEFINE_PRCC_CLK(3, ssp0_v1, 1, 1, &clk_sspclk); +static DEFINE_PRCC_CLK(3, fsmc, 0, -1, NULL); /* Peripheral Cluster #4 is in the always on domain */ /* Peripheral Cluster #5 */ -static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); -static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); -static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); +static DEFINE_PRCC_CLK(5, gpio3, 1, -1, NULL); +static DEFINE_PRCC_CLK(5, usb_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(5, usb_v1, 0, 0, NULL); /* Peripheral Cluster #6 */ /* MTU ID in data */ static DEFINE_PRCC_CLK_CUSTOM(6, mtu1_v1, 8, -1, NULL, clk_mtu_get_rate, 1); static DEFINE_PRCC_CLK_CUSTOM(6, mtu0_v1, 7, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); -static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); -static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); -static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); -static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); -static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); -static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); -static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); -static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); -static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); +static DEFINE_PRCC_CLK(6, cfgreg_v1, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, dmc_ed, 6, 6, NULL); +static DEFINE_PRCC_CLK(6, hash1, 5, -1, NULL); +static DEFINE_PRCC_CLK(6, unipro_v1, 4, 1, &clk_uniproclk); +static DEFINE_PRCC_CLK(6, cryp1_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(6, pka, 3, -1, NULL); +static DEFINE_PRCC_CLK(6, hash0, 2, -1, NULL); +static DEFINE_PRCC_CLK(6, cryp0, 1, -1, NULL); +static DEFINE_PRCC_CLK(6, rng_ed, 0, 0, &clk_i2cclk); +static DEFINE_PRCC_CLK(6, rng_v1, 0, 0, &clk_rngclk); /* Peripheral Cluster #7 */ -static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); +static DEFINE_PRCC_CLK(7, tzpc0_ed, 4, -1, NULL); /* MTU ID in data */ static DEFINE_PRCC_CLK_CUSTOM(7, mtu1_ed, 3, -1, NULL, clk_mtu_get_rate, 1); static DEFINE_PRCC_CLK_CUSTOM(7, mtu0_ed, 2, -1, NULL, clk_mtu_get_rate, 0); -static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); -static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); +static DEFINE_PRCC_CLK(7, wdg_ed, 1, -1, NULL); +static DEFINE_PRCC_CLK(7, cfgreg_ed, 0, -1, NULL); -static struct clk clk_dummy_apb_pclk; +static struct clk clk_dummy_apb_pclk = { + .name = "apb_pclk", +}; static struct clk_lookup u8500_common_clks[] = { CLK(dummy_apb_pclk, NULL, "apb_pclk"), @@ -554,7 +532,7 @@ static struct clk_lookup u8500_ed_clks[] = { static struct clk_lookup u8500_v1_clks[] = { /* Peripheral Cluster #1 */ - CLK(i2c4, "nmk-i2c.4", NULL), + CLK(i2c4, "nmk-i2c.4", NULL), CLK(spi3_v1, "spi3", NULL), CLK(msp1_v1, "msp1", NULL), @@ -599,6 +577,183 @@ static struct clk_lookup u8500_v1_clks[] = { CLK(uiccclk, "uicc", NULL), }; +#ifdef CONFIG_DEBUG_FS +/* + * debugfs support to trace clock tree hierarchy and attributes with + * powerdebug + */ +static struct dentry *clk_debugfs_root; + +void __init clk_debugfs_add_table(struct clk_lookup *cl, size_t num) +{ + while (num--) { + /* Check that the clock has not been already registered */ + if (!(cl->clk->list.prev != cl->clk->list.next)) + list_add_tail(&cl->clk->list, &clk_list); + + cl++; + } +} + +static ssize_t usecount_dbg_read(struct file *file, char __user *buf, + size_t size, loff_t *off) +{ + struct clk *clk = file->f_dentry->d_inode->i_private; + char cusecount[128]; + unsigned int len; + + len = sprintf(cusecount, "%u\n", clk->enabled); + return simple_read_from_buffer(buf, size, off, cusecount, len); +} + +static ssize_t rate_dbg_read(struct file *file, char __user *buf, + size_t size, loff_t *off) +{ + struct clk *clk = file->f_dentry->d_inode->i_private; + char crate[128]; + unsigned int rate; + unsigned int len; + + rate = clk_get_rate(clk); + len = sprintf(crate, "%u\n", rate); + return simple_read_from_buffer(buf, size, off, crate, len); +} + +static const struct file_operations usecount_fops = { + .read = usecount_dbg_read, +}; + +static const struct file_operations set_rate_fops = { + .read = rate_dbg_read, +}; + +static struct dentry *clk_debugfs_register_dir(struct clk *c, + struct dentry *p_dentry) +{ + struct dentry *d, *clk_d, *child, *child_tmp; + char s[255]; + char *p = s; + + if (c->name == NULL) + p += sprintf(p, "BUG"); + else + p += sprintf(p, "%s", c->name); + + clk_d = debugfs_create_dir(s, p_dentry); + if (!clk_d) + return NULL; + + d = debugfs_create_file("usecount", S_IRUGO, + clk_d, c, &usecount_fops); + if (!d) + goto err_out; + d = debugfs_create_file("rate", S_IRUGO, + clk_d, c, &set_rate_fops); + if (!d) + goto err_out; + /* + * TODO : not currently available in ux500 + * d = debugfs_create_x32("flags", S_IRUGO, clk_d, (u32 *)&c->flags); + * if (!d) + * goto err_out; + */ + + return clk_d; + +err_out: + d = clk_d; + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) + debugfs_remove(child); + debugfs_remove(clk_d); + return NULL; +} + +static void clk_debugfs_remove_dir(struct dentry *cdentry) +{ + struct dentry *d, *child, *child_tmp; + + d = cdentry; + list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) + debugfs_remove(child); + debugfs_remove(cdentry); + return ; +} + +static int clk_debugfs_register_one(struct clk *c) +{ + struct clk *pa = c->parent_periph; + struct clk *bpa = c->parent_cluster; + + if (!(bpa && !pa)) { + c->dent = clk_debugfs_register_dir(c, + pa ? pa->dent : clk_debugfs_root); + if (!c->dent) + return -ENOMEM; + } + + if (bpa) { + c->dent_bus = clk_debugfs_register_dir(c, + bpa->dent_bus ? bpa->dent_bus : bpa->dent); + if ((!c->dent_bus) && (c->dent)) { + clk_debugfs_remove_dir(c->dent); + c->dent = NULL; + return -ENOMEM; + } + } + return 0; +} + +static int clk_debugfs_register(struct clk *c) +{ + int err; + struct clk *pa = c->parent_periph; + struct clk *bpa = c->parent_cluster; + + if (pa && (!pa->dent && !pa->dent_bus)) { + err = clk_debugfs_register(pa); + if (err) + return err; + } + + if (bpa && (!bpa->dent && !bpa->dent_bus)) { + err = clk_debugfs_register(bpa); + if (err) + return err; + } + + if ((!c->dent) && (!c->dent_bus)) { + err = clk_debugfs_register_one(c); + if (err) + return err; + } + return 0; +} + +static int __init clk_debugfs_init(void) +{ + struct clk *c; + struct dentry *d; + int err; + + d = debugfs_create_dir("clock", NULL); + if (!d) + return -ENOMEM; + clk_debugfs_root = d; + + list_for_each_entry(c, &clk_list, list) { + err = clk_debugfs_register(c); + if (err) + goto err_out; + } + return 0; +err_out: + debugfs_remove_recursive(clk_debugfs_root); + return err; +} + +late_initcall(clk_debugfs_init); +#endif /* defined(CONFIG_DEBUG_FS) */ + int __init clk_init(void) { if (cpu_is_u8500ed()) { @@ -609,7 +764,8 @@ int __init clk_init(void) /* Clock tree for U5500 not implemented yet */ clk_prcc_ops.enable = clk_prcc_ops.disable = NULL; clk_prcmu_ops.enable = clk_prcmu_ops.disable = NULL; - clk_per6clk.rate = 26000000; + clk_uartclk.rate = 36360000; + clk_sdmmcclk.rate = 99900000; } clkdev_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); @@ -618,5 +774,12 @@ int __init clk_init(void) else clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); +#ifdef CONFIG_DEBUG_FS + clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); + if (cpu_is_u8500ed()) + clk_debugfs_add_table(u8500_ed_clks, ARRAY_SIZE(u8500_ed_clks)); + else + clk_debugfs_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); +#endif return 0; } diff --git a/arch/arm/mach-ux500/clock.h b/arch/arm/mach-ux500/clock.h index a0580250152..07449070522 100644 --- a/arch/arm/mach-ux500/clock.h +++ b/arch/arm/mach-ux500/clock.h @@ -90,6 +90,10 @@ struct clk { struct clk *parent_cluster; struct clk *parent_periph; +#if defined(CONFIG_DEBUG_FS) + struct dentry *dent; /* For visible tree hierarchy */ + struct dentry *dent_bus; /* For visible tree hierarchy */ +#endif }; #define DEFINE_PRCMU_CLK(_name, _cg_off, _cg_bit, _reg) \ diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index 2f87075e9d6..acc841e48de 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -8,14 +8,19 @@ #include <linux/platform_device.h> #include <linux/amba/bus.h> #include <linux/io.h> +#include <linux/irq.h> #include <asm/mach/map.h> +#include <plat/gpio.h> + #include <mach/hardware.h> #include <mach/devices.h> #include <mach/setup.h> #include <mach/irqs.h> +#include "devices-db5500.h" + static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO1_BASE, SZ_4K), @@ -110,19 +115,32 @@ static struct platform_device mbox2_device = { }; static struct platform_device *u5500_platform_devs[] __initdata = { - &u5500_gpio_devs[0], - &u5500_gpio_devs[1], - &u5500_gpio_devs[2], - &u5500_gpio_devs[3], - &u5500_gpio_devs[4], - &u5500_gpio_devs[5], - &u5500_gpio_devs[6], - &u5500_gpio_devs[7], &mbox0_device, &mbox1_device, &mbox2_device, }; +static resource_size_t __initdata db5500_gpio_base[] = { + U5500_GPIOBANK0_BASE, + U5500_GPIOBANK1_BASE, + U5500_GPIOBANK2_BASE, + U5500_GPIOBANK3_BASE, + U5500_GPIOBANK4_BASE, + U5500_GPIOBANK5_BASE, + U5500_GPIOBANK6_BASE, + U5500_GPIOBANK7_BASE, +}; + +static void __init db5500_add_gpios(void) +{ + struct nmk_gpio_platform_data pdata = { + /* No custom data yet */ + }; + + dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base), + IRQ_DB5500_GPIO0, &pdata); +} + void __init u5500_map_io(void) { ux500_map_io(); @@ -132,7 +150,9 @@ void __init u5500_map_io(void) void __init u5500_init_devices(void) { - ux500_init_devices(); + db5500_add_gpios(); + db5500_dma_init(); + db5500_add_rtc(); platform_add_devices(u5500_platform_devs, ARRAY_SIZE(u5500_platform_devs)); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 4acab7544b3..c0f34a404c5 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -22,23 +22,15 @@ #include <mach/setup.h> #include <mach/devices.h> +#include "devices-db8500.h" + static struct platform_device *platform_devs[] __initdata = { - &u8500_gpio_devs[0], - &u8500_gpio_devs[1], - &u8500_gpio_devs[2], - &u8500_gpio_devs[3], - &u8500_gpio_devs[4], - &u8500_gpio_devs[5], - &u8500_gpio_devs[6], - &u8500_gpio_devs[7], - &u8500_gpio_devs[8], &u8500_dma40_device, }; /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_io_desc[] __initdata = { __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), - __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), @@ -46,13 +38,18 @@ static struct map_desc u8500_io_desc[] __initdata = { __MEM_DEV_DESC(U8500_BOOT_ROM_BASE, SZ_1M), }; -static struct map_desc u8500ed_io_desc[] __initdata = { +static struct map_desc u8500_ed_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), }; -static struct map_desc u8500v1_io_desc[] __initdata = { +static struct map_desc u8500_v1_io_desc[] __initdata = { __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K), +}; + +static struct map_desc u8500_v2_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), }; /* @@ -125,14 +122,38 @@ void __init u8500_map_io(void) iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); if (cpu_is_u8500ed()) - iotable_init(u8500ed_io_desc, ARRAY_SIZE(u8500ed_io_desc)); - else - iotable_init(u8500v1_io_desc, ARRAY_SIZE(u8500v1_io_desc)); + iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc)); + else if (cpu_is_u8500v1()) + iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); + else if (cpu_is_u8500v2()) + iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); /* Read out the ASIC ID as early as we can */ get_db8500_asic_id(); } +static resource_size_t __initdata db8500_gpio_base[] = { + U8500_GPIOBANK0_BASE, + U8500_GPIOBANK1_BASE, + U8500_GPIOBANK2_BASE, + U8500_GPIOBANK3_BASE, + U8500_GPIOBANK4_BASE, + U8500_GPIOBANK5_BASE, + U8500_GPIOBANK6_BASE, + U8500_GPIOBANK7_BASE, + U8500_GPIOBANK8_BASE, +}; + +static void __init db8500_add_gpios(void) +{ + struct nmk_gpio_platform_data pdata = { + /* No custom data yet */ + }; + + dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), + IRQ_DB8500_GPIO0, &pdata); +} + /* * This function is called from the board init */ @@ -152,12 +173,13 @@ void __init u8500_init_devices(void) else pr_warning("ASIC: UNKNOWN SILICON VERSION!\n"); - ux500_init_devices(); - if (cpu_is_u8500ed()) dma40_u8500ed_fixup(); - /* Register the platform devices */ + db8500_add_rtc(); + db8500_add_gpios(); + + platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); return ; diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index 608a1372b17..a3700bc374d 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -6,7 +6,6 @@ */ #include <linux/platform_device.h> -#include <linux/amba/bus.h> #include <linux/io.h> #include <linux/clk.h> @@ -20,6 +19,7 @@ #include <mach/hardware.h> #include <mach/setup.h> #include <mach/devices.h> +#include <mach/prcmu.h> #include "clock.h" @@ -45,20 +45,11 @@ static struct map_desc ux500_io_desc[] __initdata = { __IO_DEV_DESC(UX500_BACKUPRAM0_BASE, SZ_8K), }; -static struct amba_device *ux500_amba_devs[] __initdata = { - &ux500_pl031_device, -}; - void __init ux500_map_io(void) { iotable_init(ux500_io_desc, ARRAY_SIZE(ux500_io_desc)); } -void __init ux500_init_devices(void) -{ - amba_add_devices(ux500_amba_devs, ARRAY_SIZE(ux500_amba_devs)); -} - void __init ux500_init_irq(void) { gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29); @@ -68,6 +59,8 @@ void __init ux500_init_irq(void) * Init clocks here so that they are available for system timer * initialization. */ + if (cpu_is_u8500()) + prcmu_early_init(); clk_init(); } diff --git a/arch/arm/mach-ux500/cpufreq.c b/arch/arm/mach-ux500/cpufreq.c new file mode 100644 index 00000000000..5c5b747f134 --- /dev/null +++ b/arch/arm/mach-ux500/cpufreq.c @@ -0,0 +1,211 @@ +/* + * CPU frequency scaling for u8500 + * Inspired by linux/arch/arm/mach-davinci/cpufreq.c + * + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * Author: Martin Persson <martin.persson@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + * + */ + +#include <linux/platform_device.h> +#include <linux/kernel.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> + +#include <mach/hardware.h> +#include <mach/prcmu.h> +#include <mach/prcmu-defs.h> + +#define DRIVER_NAME "cpufreq-u8500" +#define CPUFREQ_NAME "u8500" + +static struct device *dev; + +static struct cpufreq_frequency_table freq_table[] = { + [0] = { + .index = 0, + .frequency = 200000, + }, + [1] = { + .index = 1, + .frequency = 300000, + }, + [2] = { + .index = 2, + .frequency = 600000, + }, + [3] = { + /* Used for CPU_OPP_MAX, if available */ + .index = 3, + .frequency = CPUFREQ_TABLE_END, + }, + [4] = { + .index = 4, + .frequency = CPUFREQ_TABLE_END, + }, +}; + +static enum prcmu_cpu_opp index2opp[] = { + CPU_OPP_EXT_CLK, + CPU_OPP_50, + CPU_OPP_100, + CPU_OPP_MAX +}; + +static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, freq_table); +} + +static int u8500_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + unsigned int index; + int ret = 0; + + /* + * Ensure desired rate is within allowed range. Some govenors + * (ondemand) will just pass target_freq=0 to get the minimum. + */ + if (target_freq < policy->cpuinfo.min_freq) + target_freq = policy->cpuinfo.min_freq; + if (target_freq > policy->cpuinfo.max_freq) + target_freq = policy->cpuinfo.max_freq; + + ret = cpufreq_frequency_table_target(policy, freq_table, + target_freq, relation, &index); + if (ret < 0) { + dev_err(dev, "Could not look up next frequency\n"); + return ret; + } + + freqs.old = policy->cur; + freqs.new = freq_table[index].frequency; + freqs.cpu = policy->cpu; + + if (freqs.old == freqs.new) { + dev_dbg(dev, "Current and target frequencies are equal\n"); + return 0; + } + + dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new); + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + ret = prcmu_set_cpu_opp(index2opp[index]); + if (ret < 0) { + dev_err(dev, "Failed to set OPP level\n"); + return ret; + } + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + + return ret; +} + +static unsigned int u8500_cpufreq_getspeed(unsigned int cpu) +{ + int i; + + for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++) + ; + return freq_table[i].frequency; +} + +static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy) +{ + int res; + + BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table)); + + if (cpu_is_u8500v2()) { + freq_table[1].frequency = 400000; + freq_table[2].frequency = 800000; + if (prcmu_has_arm_maxopp()) + freq_table[3].frequency = 1000000; + } + + /* get policy fields based on the table */ + res = cpufreq_frequency_table_cpuinfo(policy, freq_table); + if (!res) + cpufreq_frequency_table_get_attr(freq_table, policy->cpu); + else { + dev_err(dev, "u8500-cpufreq : Failed to read policy table\n"); + return res; + } + + policy->min = policy->cpuinfo.min_freq; + policy->max = policy->cpuinfo.max_freq; + policy->cur = u8500_cpufreq_getspeed(policy->cpu); + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + /* + * FIXME : Need to take time measurement across the target() + * function with no/some/all drivers in the notification + * list. + */ + policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */ + + /* policy sharing between dual CPUs */ + cpumask_copy(policy->cpus, &cpu_present_map); + + policy->shared_type = CPUFREQ_SHARED_TYPE_ALL; + + return res; +} + +static struct freq_attr *u8500_cpufreq_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; +static int u8500_cpu_exit(struct cpufreq_policy *policy) +{ + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static struct cpufreq_driver u8500_driver = { + .owner = THIS_MODULE, + .flags = CPUFREQ_STICKY, + .verify = u8500_cpufreq_verify_speed, + .target = u8500_cpufreq_target, + .get = u8500_cpufreq_getspeed, + .init = u8500_cpu_init, + .exit = u8500_cpu_exit, + .name = CPUFREQ_NAME, + .attr = u8500_cpufreq_attr, +}; + +static int __init u8500_cpufreq_probe(struct platform_device *pdev) +{ + dev = &pdev->dev; + return cpufreq_register_driver(&u8500_driver); +} + +static int __exit u8500_cpufreq_remove(struct platform_device *pdev) +{ + return cpufreq_unregister_driver(&u8500_driver); +} + +static struct platform_driver u8500_cpufreq_driver = { + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, + .remove = __exit_p(u8500_cpufreq_remove), +}; + +static int __init u8500_cpufreq_init(void) +{ + return platform_driver_probe(&u8500_cpufreq_driver, + &u8500_cpufreq_probe); +} + +device_initcall(u8500_cpufreq_init); diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c new file mode 100644 index 00000000000..fe69f5fac1b --- /dev/null +++ b/arch/arm/mach-ux500/devices-common.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/amba/bus.h> + +#include <plat/gpio.h> + +#include <mach/hardware.h> + +#include "devices-common.h" + +struct amba_device * +dbx500_add_amba_device(const char *name, resource_size_t base, + int irq, void *pdata, unsigned int periphid) +{ + struct amba_device *dev; + int ret; + + dev = kzalloc(sizeof *dev, GFP_KERNEL); + if (!dev) + return ERR_PTR(-ENOMEM); + + dev->dev.init_name = name; + + dev->res.start = base; + dev->res.end = base + SZ_4K - 1; + dev->res.flags = IORESOURCE_MEM; + + dev->dma_mask = DMA_BIT_MASK(32); + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + dev->irq[0] = irq; + dev->irq[1] = NO_IRQ; + + dev->periphid = periphid; + + dev->dev.platform_data = pdata; + + ret = amba_device_register(dev, &iomem_resource); + if (ret) { + kfree(dev); + return ERR_PTR(ret); + } + + return dev; +} + +static struct platform_device * +dbx500_add_platform_device(const char *name, int id, void *pdata, + struct resource *res, int resnum) +{ + struct platform_device *dev; + int ret; + + dev = platform_device_alloc(name, id); + if (!dev) + return ERR_PTR(-ENOMEM); + + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + dev->dev.dma_mask = &dev->dev.coherent_dma_mask; + + ret = platform_device_add_resources(dev, res, resnum); + if (ret) + goto out_free; + + dev->dev.platform_data = pdata; + + ret = platform_device_add(dev); + if (ret) + goto out_free; + + return dev; + +out_free: + platform_device_put(dev); + return ERR_PTR(ret); +} + +struct platform_device * +dbx500_add_platform_device_4k1irq(const char *name, int id, + resource_size_t base, + int irq, void *pdata) +{ + struct resource resources[] = { + [0] = { + .start = base, + .end = base + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + } + }; + + return dbx500_add_platform_device(name, id, pdata, resources, + ARRAY_SIZE(resources)); +} + +static struct platform_device * +dbx500_add_gpio(int id, resource_size_t addr, int irq, + struct nmk_gpio_platform_data *pdata) +{ + struct resource resources[] = { + { + .start = addr, + .end = addr + 127, + .flags = IORESOURCE_MEM, + }, + { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + } + }; + + return platform_device_register_resndata(NULL, "gpio", id, + resources, ARRAY_SIZE(resources), + pdata, sizeof(*pdata)); +} + +void dbx500_add_gpios(resource_size_t *base, int num, int irq, + struct nmk_gpio_platform_data *pdata) +{ + int first = 0; + int i; + + for (i = 0; i < num; i++, first += 32, irq++) { + pdata->first_gpio = first; + pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first); + + dbx500_add_gpio(i, base[i], irq, pdata); + } +} diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h new file mode 100644 index 00000000000..cbadc117d2d --- /dev/null +++ b/arch/arm/mach-ux500/devices-common.h @@ -0,0 +1,82 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __DEVICES_COMMON_H +#define __DEVICES_COMMON_H + +extern struct amba_device * +dbx500_add_amba_device(const char *name, resource_size_t base, + int irq, void *pdata, unsigned int periphid); + +extern struct platform_device * +dbx500_add_platform_device_4k1irq(const char *name, int id, + resource_size_t base, + int irq, void *pdata); + +struct spi_master_cntlr; + +static inline struct amba_device * +dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, + struct spi_master_cntlr *pdata) +{ + return dbx500_add_amba_device(name, base, irq, pdata, 0); +} + +static inline struct amba_device * +dbx500_add_spi(const char *name, resource_size_t base, int irq, + struct spi_master_cntlr *pdata) +{ + return dbx500_add_amba_device(name, base, irq, pdata, 0); +} + +struct mmci_platform_data; + +static inline struct amba_device * +dbx500_add_sdi(const char *name, resource_size_t base, int irq, + struct mmci_platform_data *pdata) +{ + return dbx500_add_amba_device(name, base, irq, pdata, 0); +} + +static inline struct amba_device * +dbx500_add_uart(const char *name, resource_size_t base, int irq) +{ + return dbx500_add_amba_device(name, base, irq, NULL, 0); +} + +struct nmk_i2c_controller; + +static inline struct platform_device * +dbx500_add_i2c(int id, resource_size_t base, int irq, + struct nmk_i2c_controller *pdata) +{ + return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq, + pdata); +} + +struct msp_i2s_platform_data; + +static inline struct platform_device * +dbx500_add_msp_i2s(int id, resource_size_t base, int irq, + struct msp_i2s_platform_data *pdata) +{ + return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq, + pdata); +} + +static inline struct amba_device * +dbx500_add_rtc(resource_size_t base, int irq) +{ + return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0); +} + +struct nmk_gpio_platform_data; + +void dbx500_add_gpios(resource_size_t *base, int num, int irq, + struct nmk_gpio_platform_data *pdata); + +#endif diff --git a/arch/arm/mach-ux500/devices-db5500.c b/arch/arm/mach-ux500/devices-db5500.c deleted file mode 100644 index 33e5b56bebb..00000000000 --- a/arch/arm/mach-ux500/devices-db5500.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/gpio.h> - -#include <mach/hardware.h> -#include <mach/devices.h> - -static struct nmk_gpio_platform_data u5500_gpio_data[] = { - GPIO_DATA("GPIO-0-31", 0), - GPIO_DATA("GPIO-32-63", 32), /* 36..63 not routed to pin */ - GPIO_DATA("GPIO-64-95", 64), /* 83..95 not routed to pin */ - GPIO_DATA("GPIO-96-127", 96), /* 102..127 not routed to pin */ - GPIO_DATA("GPIO-128-159", 128), /* 149..159 not routed to pin */ - GPIO_DATA("GPIO-160-191", 160), - GPIO_DATA("GPIO-192-223", 192), - GPIO_DATA("GPIO-224-255", 224), /* 228..255 not routed to pin */ -}; - -static struct resource u5500_gpio_resources[] = { - GPIO_RESOURCE(0), - GPIO_RESOURCE(1), - GPIO_RESOURCE(2), - GPIO_RESOURCE(3), - GPIO_RESOURCE(4), - GPIO_RESOURCE(5), - GPIO_RESOURCE(6), - GPIO_RESOURCE(7), -}; - -struct platform_device u5500_gpio_devs[] = { - GPIO_DEVICE(0), - GPIO_DEVICE(1), - GPIO_DEVICE(2), - GPIO_DEVICE(3), - GPIO_DEVICE(4), - GPIO_DEVICE(5), - GPIO_DEVICE(6), - GPIO_DEVICE(7), -}; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h new file mode 100644 index 00000000000..c8d7901c1f2 --- /dev/null +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __DEVICES_DB5500_H +#define __DEVICES_DB5500_H + +#include "devices-common.h" + +#define db5500_add_i2c1(pdata) \ + dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata) +#define db5500_add_i2c2(pdata) \ + dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata) +#define db5500_add_i2c3(pdata) \ + dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata) + +#define db5500_add_msp0_i2s(pdata) \ + dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_i2s(pdata) \ + dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_i2s(pdata) \ + dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) + +#define db5500_add_msp0_spi(pdata) \ + dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata) +#define db5500_add_msp1_spi(pdata) \ + dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata) +#define db5500_add_msp2_spi(pdata) \ + dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata) + +#define db5500_add_rtc() \ + dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC); + +#define db5500_add_sdi0(pdata) \ + dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) +#define db5500_add_sdi1(pdata) \ + dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata) +#define db5500_add_sdi2(pdata) \ + dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata) +#define db5500_add_sdi3(pdata) \ + dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata) +#define db5500_add_sdi4(pdata) \ + dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata) + +#define db5500_add_spi0(pdata) \ + dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata) +#define db5500_add_spi1(pdata) \ + dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata) +#define db5500_add_spi2(pdata) \ + dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata) +#define db5500_add_spi3(pdata) \ + dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) + +#define db5500_add_uart0() \ + dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0) +#define db5500_add_uart1() \ + dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1) +#define db5500_add_uart2() \ + dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2) +#define db5500_add_uart3() \ + dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3) + +#endif diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 4a94be3304b..23c695d5497 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -19,173 +19,6 @@ #include "ste-dma40-db8500.h" -static struct nmk_gpio_platform_data u8500_gpio_data[] = { - GPIO_DATA("GPIO-0-31", 0), - GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ - GPIO_DATA("GPIO-64-95", 64), - GPIO_DATA("GPIO-96-127", 96), /* 98..127 not routed to pin */ - GPIO_DATA("GPIO-128-159", 128), - GPIO_DATA("GPIO-160-191", 160), /* 172..191 not routed to pin */ - GPIO_DATA("GPIO-192-223", 192), - GPIO_DATA("GPIO-224-255", 224), /* 231..255 not routed to pin */ - GPIO_DATA("GPIO-256-288", 256), /* 268..288 not routed to pin */ -}; - -static struct resource u8500_gpio_resources[] = { - GPIO_RESOURCE(0), - GPIO_RESOURCE(1), - GPIO_RESOURCE(2), - GPIO_RESOURCE(3), - GPIO_RESOURCE(4), - GPIO_RESOURCE(5), - GPIO_RESOURCE(6), - GPIO_RESOURCE(7), - GPIO_RESOURCE(8), -}; - -struct platform_device u8500_gpio_devs[] = { - GPIO_DEVICE(0), - GPIO_DEVICE(1), - GPIO_DEVICE(2), - GPIO_DEVICE(3), - GPIO_DEVICE(4), - GPIO_DEVICE(5), - GPIO_DEVICE(6), - GPIO_DEVICE(7), - GPIO_DEVICE(8), -}; - -struct amba_device u8500_ssp0_device = { - .dev = { - .coherent_dma_mask = ~0, - .init_name = "ssp0", - }, - .res = { - .start = U8500_SSP0_BASE, - .end = U8500_SSP0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SSP0, NO_IRQ }, - /* ST-Ericsson modified id */ - .periphid = SSP_PER_ID, -}; - -static struct resource u8500_i2c0_resources[] = { - [0] = { - .start = U8500_I2C0_BASE, - .end = U8500_I2C0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DB8500_I2C0, - .end = IRQ_DB8500_I2C0, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device u8500_i2c0_device = { - .name = "nmk-i2c", - .id = 0, - .resource = u8500_i2c0_resources, - .num_resources = ARRAY_SIZE(u8500_i2c0_resources), -}; - -static struct resource u8500_i2c4_resources[] = { - [0] = { - .start = U8500_I2C4_BASE, - .end = U8500_I2C4_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DB8500_I2C4, - .end = IRQ_DB8500_I2C4, - .flags = IORESOURCE_IRQ, - } -}; - -struct platform_device u8500_i2c4_device = { - .name = "nmk-i2c", - .id = 4, - .resource = u8500_i2c4_resources, - .num_resources = ARRAY_SIZE(u8500_i2c4_resources), -}; - -/* - * SD/MMC - */ - -struct amba_device u8500_sdi0_device = { - .dev = { - .init_name = "sdi0", - }, - .res = { - .start = U8500_SDI0_BASE, - .end = U8500_SDI0_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC0, NO_IRQ}, -}; - -struct amba_device u8500_sdi1_device = { - .dev = { - .init_name = "sdi1", - }, - .res = { - .start = U8500_SDI1_BASE, - .end = U8500_SDI1_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC1, NO_IRQ}, -}; - -struct amba_device u8500_sdi2_device = { - .dev = { - .init_name = "sdi2", - }, - .res = { - .start = U8500_SDI2_BASE, - .end = U8500_SDI2_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC2, NO_IRQ}, -}; - -struct amba_device u8500_sdi3_device = { - .dev = { - .init_name = "sdi3", - }, - .res = { - .start = U8500_SDI3_BASE, - .end = U8500_SDI3_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC3, NO_IRQ}, -}; - -struct amba_device u8500_sdi4_device = { - .dev = { - .init_name = "sdi4", - }, - .res = { - .start = U8500_SDI4_BASE, - .end = U8500_SDI4_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC4, NO_IRQ}, -}; - -struct amba_device u8500_sdi5_device = { - .dev = { - .init_name = "sdi5", - }, - .res = { - .start = U8500_SDI5_BASE, - .end = U8500_SDI5_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_DB8500_SDMMC5, NO_IRQ}, -}; - static struct resource dma40_resources[] = { [0] = { .start = U8500_DMA_BASE, @@ -295,7 +128,7 @@ struct resource keypad_resources[] = { }, }; -struct platform_device ux500_ske_keypad_device = { +struct platform_device u8500_ske_keypad_device = { .name = "nmk-ske-keypad", .id = -1, .num_resources = ARRAY_SIZE(keypad_resources), diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h new file mode 100644 index 00000000000..3a770c75697 --- /dev/null +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -0,0 +1,98 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL), version 2. + */ + +#ifndef __DEVICES_DB8500_H +#define __DEVICES_DB8500_H + +#include "devices-common.h" + +struct ske_keypad_platform_data; +struct pl022_ssp_controller; + +static inline struct platform_device * +db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata) +{ + return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1, + U8500_SKE_BASE, + IRQ_DB8500_KB, pdata); +} + +static inline struct amba_device * +db8500_add_ssp(const char *name, resource_size_t base, int irq, + struct pl022_ssp_controller *pdata) +{ + return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID); +} + + +#define db8500_add_i2c0(pdata) \ + dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata) +#define db8500_add_i2c1(pdata) \ + dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata) +#define db8500_add_i2c2(pdata) \ + dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata) +#define db8500_add_i2c3(pdata) \ + dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata) +#define db8500_add_i2c4(pdata) \ + dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata) + +#define db8500_add_msp0_i2s(pdata) \ + dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_i2s(pdata) \ + dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_i2s(pdata) \ + dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_i2s(pdata) \ + dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) + +#define db8500_add_msp0_spi(pdata) \ + dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata) +#define db8500_add_msp1_spi(pdata) \ + dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata) +#define db8500_add_msp2_spi(pdata) \ + dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata) +#define db8500_add_msp3_spi(pdata) \ + dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata) + +#define db8500_add_rtc() \ + dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC); + +#define db8500_add_sdi0(pdata) \ + dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) +#define db8500_add_sdi1(pdata) \ + dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata) +#define db8500_add_sdi2(pdata) \ + dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata) +#define db8500_add_sdi3(pdata) \ + dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata) +#define db8500_add_sdi4(pdata) \ + dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata) +#define db8500_add_sdi5(pdata) \ + dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata) + +#define db8500_add_ssp0(pdata) \ + db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) +#define db8500_add_ssp1(pdata) \ + db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) + +#define db8500_add_spi0(pdata) \ + dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata) +#define db8500_add_spi1(pdata) \ + dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata) +#define db8500_add_spi2(pdata) \ + dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata) +#define db8500_add_spi3(pdata) \ + dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) + +#define db8500_add_uart0() \ + dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0) +#define db8500_add_uart1() \ + dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1) +#define db8500_add_uart2() \ + dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2) + +#endif diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c index 8a268893cb7..ea0a2f92ca7 100644 --- a/arch/arm/mach-ux500/devices.c +++ b/arch/arm/mach-ux500/devices.c @@ -14,69 +14,6 @@ #include <mach/hardware.h> #include <mach/setup.h> -#define __MEM_4K_RESOURCE(x) \ - .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM} - -struct amba_device ux500_pl031_device = { - .dev = { - .init_name = "pl031", - }, - .res = { - .start = UX500_RTC_BASE, - .end = UX500_RTC_BASE + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - .irq = {IRQ_RTC_RTT, NO_IRQ}, -}; - -struct amba_device ux500_uart0_device = { - .dev = { .init_name = "uart0" }, - __MEM_4K_RESOURCE(UX500_UART0_BASE), - .irq = {IRQ_UART0, NO_IRQ}, -}; - -struct amba_device ux500_uart1_device = { - .dev = { .init_name = "uart1" }, - __MEM_4K_RESOURCE(UX500_UART1_BASE), - .irq = {IRQ_UART1, NO_IRQ}, -}; - -struct amba_device ux500_uart2_device = { - .dev = { .init_name = "uart2" }, - __MEM_4K_RESOURCE(UX500_UART2_BASE), - .irq = {IRQ_UART2, NO_IRQ}, -}; - -#define UX500_I2C_RESOURCES(id, size) \ -static struct resource ux500_i2c##id##_resources[] = { \ - [0] = { \ - .start = UX500_I2C##id##_BASE, \ - .end = UX500_I2C##id##_BASE + size - 1, \ - .flags = IORESOURCE_MEM, \ - }, \ - [1] = { \ - .start = IRQ_I2C##id, \ - .end = IRQ_I2C##id, \ - .flags = IORESOURCE_IRQ \ - } \ -} - -UX500_I2C_RESOURCES(1, SZ_4K); -UX500_I2C_RESOURCES(2, SZ_4K); -UX500_I2C_RESOURCES(3, SZ_4K); - -#define UX500_I2C_PDEVICE(cid) \ -struct platform_device ux500_i2c##cid##_device = { \ - .name = "nmk-i2c", \ - .id = cid, \ - .num_resources = 2, \ - .resource = ux500_i2c##cid##_resources, \ -} - -UX500_I2C_PDEVICE(1); -UX500_I2C_PDEVICE(2); -UX500_I2C_PDEVICE(3); - void __init amba_add_devices(struct amba_device *devs[], int num) { int i; diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c new file mode 100644 index 00000000000..32a061f8a95 --- /dev/null +++ b/arch/arm/mach-ux500/dma-db5500.c @@ -0,0 +1,120 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson + * Author: Rabin Vincent <rabinv.vincent@stericsson.com> for ST-Ericsson + * + * License terms: GNU General Public License (GPL), version 2 + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <plat/ste_dma40.h> +#include <mach/setup.h> +#include <mach/hardware.h> + +#include "ste-dma40-db5500.h" + +static struct resource dma40_resources[] = { + [0] = { + .start = U5500_DMA_BASE, + .end = U5500_DMA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "base", + }, + [1] = { + .start = U5500_DMA_LCPA_BASE, + .end = U5500_DMA_LCPA_BASE + 2 * SZ_1K - 1, + .flags = IORESOURCE_MEM, + .name = "lcpa", + }, + [2] = { + .start = IRQ_DB5500_DMA, + .end = IRQ_DB5500_DMA, + .flags = IORESOURCE_IRQ + } +}; + +/* Default configuration for physical memcpy */ +static struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .mode = STEDMA40_MODE_PHYSICAL, + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; + +/* Default configuration for logical memcpy */ +static struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, + + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, +}; + +/* + * Mapping between soruce event lines and physical device address This was + * created assuming that the event line is tied to a device and therefore the + * address is constant, however this is not true for at least USB, and the + * values are just placeholders for USB. This table is preserved and used for + * now. + */ +static const dma_addr_t dma40_rx_map[DB5500_DMA_NR_DEV] = { + [DB5500_DMA_DEV24_SDMMC0_RX] = -1, +}; + +/* Mapping between destination event lines and physical device address */ +static const dma_addr_t dma40_tx_map[DB5500_DMA_NR_DEV] = { + [DB5500_DMA_DEV24_SDMMC0_TX] = -1, +}; + +static int dma40_memcpy_event[] = { + DB5500_DMA_MEMCPY_TX_1, + DB5500_DMA_MEMCPY_TX_2, + DB5500_DMA_MEMCPY_TX_3, + DB5500_DMA_MEMCPY_TX_4, + DB5500_DMA_MEMCPY_TX_5, +}; + +static struct stedma40_platform_data dma40_plat_data = { + .dev_len = ARRAY_SIZE(dma40_rx_map), + .dev_rx = dma40_rx_map, + .dev_tx = dma40_tx_map, + .memcpy = dma40_memcpy_event, + .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), + .memcpy_conf_phy = &dma40_memcpy_conf_phy, + .memcpy_conf_log = &dma40_memcpy_conf_log, + .disabled_channels = {-1}, +}; + +static struct platform_device dma40_device = { + .dev = { + .platform_data = &dma40_plat_data, + }, + .name = "dma40", + .id = 0, + .num_resources = ARRAY_SIZE(dma40_resources), + .resource = dma40_resources +}; + +void __init db5500_dma_init(void) +{ + int ret; + + ret = platform_device_register(&dma40_device); + if (ret) + dev_err(&dma40_device.dev, "unable to register device: %d\n", ret); + +} diff --git a/arch/arm/mach-ux500/include/mach/db5500-regs.h b/arch/arm/mach-ux500/include/mach/db5500-regs.h index 3eafc0e24ba..bd88c1e7406 100644 --- a/arch/arm/mach-ux500/include/mach/db5500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db5500-regs.h @@ -114,4 +114,8 @@ #define U5500_MBOX2_LOCAL_START (U5500_MBOX_BASE + 0x20) #define U5500_MBOX2_LOCAL_END (U5500_MBOX_BASE + 0x3F) +#define U5500_ESRAM_BASE 0x40000000 +#define U5500_ESRAM_DMA_LCPA_OFFSET 0x10000 +#define U5500_DMA_LCPA_BASE (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET) + #endif diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index f07d0986409..0fefb34c11e 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -92,7 +92,8 @@ #define U8500_SCR_BASE (U8500_PER4_BASE + 0x05000) #define U8500_DMC_BASE (U8500_PER4_BASE + 0x06000) #define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000) -#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE_V1 (U8500_PER4_BASE + 0x0f000) +#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000) /* per3 base addresses */ #define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000) diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index b91a4d1211a..020b6369a30 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -14,27 +14,10 @@ extern struct platform_device u5500_gpio_devs[]; extern struct platform_device u8500_gpio_devs[]; extern struct amba_device ux500_pl031_device; -extern struct amba_device u8500_ssp0_device; -extern struct amba_device ux500_uart0_device; -extern struct amba_device ux500_uart1_device; -extern struct amba_device ux500_uart2_device; -extern struct platform_device ux500_i2c1_device; -extern struct platform_device ux500_i2c2_device; -extern struct platform_device ux500_i2c3_device; - -extern struct platform_device u8500_i2c0_device; -extern struct platform_device u8500_i2c4_device; extern struct platform_device u8500_dma40_device; extern struct platform_device ux500_ske_keypad_device; -extern struct amba_device u8500_sdi0_device; -extern struct amba_device u8500_sdi1_device; -extern struct amba_device u8500_sdi2_device; -extern struct amba_device u8500_sdi3_device; -extern struct amba_device u8500_sdi4_device; -extern struct amba_device u8500_sdi5_device; - void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h index d548a622e7d..3c4cd31ad9f 100644 --- a/arch/arm/mach-ux500/include/mach/gpio.h +++ b/arch/arm/mach-ux500/include/mach/gpio.h @@ -9,42 +9,4 @@ #include <plat/gpio.h> -#define __GPIO_RESOURCE(soc, block) \ - { \ - .start = soc##_GPIOBANK##block##_BASE, \ - .end = soc##_GPIOBANK##block##_BASE + 127, \ - .flags = IORESOURCE_MEM, \ - }, \ - { \ - .start = IRQ_GPIO##block, \ - .end = IRQ_GPIO##block, \ - .flags = IORESOURCE_IRQ, \ - } - -#define __GPIO_DEVICE(soc, block) \ - { \ - .name = "gpio", \ - .id = block, \ - .num_resources = 2, \ - .resource = &soc##_gpio_resources[block * 2], \ - .dev = { \ - .platform_data = &soc##_gpio_data[block], \ - }, \ - } - -#define GPIO_DATA(_name, first) \ - { \ - .name = _name, \ - .first_gpio = first, \ - .first_irq = NOMADIK_GPIO_TO_IRQ(first), \ - } - -#ifdef CONFIG_UX500_SOC_DB8500 -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U8500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u8500, block) -#elif defined(CONFIG_UX500_SOC_DB5500) -#define GPIO_RESOURCE(block) __GPIO_RESOURCE(U5500, block) -#define GPIO_DEVICE(block) __GPIO_DEVICE(u5500, block) -#endif - #endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 32e883a8f2a..6295cc58135 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -142,6 +142,8 @@ static inline bool cpu_is_u5500(void) #endif } +#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) + #endif #endif /* __MACH_HARDWARE_H */ diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index cca4f705601..7cdeb2af0eb 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -8,12 +8,36 @@ #ifndef __MACH_IRQS_BOARD_MOP500_H #define __MACH_IRQS_BOARD_MOP500_H -#define AB8500_NR_IRQS 104 +/* Number of AB8500 irqs is taken from header file */ +#include <linux/mfd/ab8500.h> #define MOP500_AB8500_IRQ_BASE IRQ_BOARD_START #define MOP500_AB8500_IRQ_END (MOP500_AB8500_IRQ_BASE \ + AB8500_NR_IRQS) -#define MOP500_IRQ_END MOP500_AB8500_IRQ_END + +/* TC35892 */ +#define TC35892_NR_INTERNAL_IRQS 8 +#define TC35892_INT_GPIO(x) (TC35892_NR_INTERNAL_IRQS + (x)) +#define TC35892_NR_GPIOS 24 +#define TC35892_NR_IRQS TC35892_INT_GPIO(TC35892_NR_GPIOS) + +#define MOP500_EGPIO_NR_IRQS TC35892_NR_IRQS + +#define MOP500_EGPIO_IRQ_BASE MOP500_AB8500_IRQ_END +#define MOP500_EGPIO_IRQ_END (MOP500_EGPIO_IRQ_BASE \ + + MOP500_EGPIO_NR_IRQS) +/* STMPE1601 irqs */ +#define STMPE_NR_INTERNAL_IRQS 9 +#define STMPE_INT_GPIO(x) (STMPE_NR_INTERNAL_IRQS + (x)) +#define STMPE_NR_GPIOS 24 +#define STMPE_NR_IRQS STMPE_INT_GPIO(STMPE_NR_GPIOS) + +#define MOP500_STMPE1601_IRQBASE MOP500_EGPIO_IRQ_END +#define MOP500_STMPE1601_IRQ(x) (MOP500_STMPE1601_IRQBASE + (x)) + +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) + +#define MOP500_IRQ_END MOP500_NR_IRQS #if MOP500_IRQ_END > IRQ_BOARD_END #undef IRQ_BOARD_END diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h index 693aa57de88..880ae45bc23 100644 --- a/arch/arm/mach-ux500/include/mach/irqs.h +++ b/arch/arm/mach-ux500/include/mach/irqs.h @@ -21,50 +21,6 @@ /* Interrupt numbers generic for shared peripheral */ #define IRQ_MTU0 (IRQ_SHPI_START + 4) -#define IRQ_SPI2 (IRQ_SHPI_START + 6) -#define IRQ_SPI0 (IRQ_SHPI_START + 8) -#define IRQ_UART0 (IRQ_SHPI_START + 11) -#define IRQ_I2C3 (IRQ_SHPI_START + 12) -#define IRQ_SSP0 (IRQ_SHPI_START + 14) -#define IRQ_MTU1 (IRQ_SHPI_START + 17) -#define IRQ_RTC_RTT (IRQ_SHPI_START + 18) -#define IRQ_UART1 (IRQ_SHPI_START + 19) -#define IRQ_I2C0 (IRQ_SHPI_START + 21) -#define IRQ_I2C1 (IRQ_SHPI_START + 22) -#define IRQ_USBOTG (IRQ_SHPI_START + 23) -#define IRQ_DMA (IRQ_SHPI_START + 25) -#define IRQ_UART2 (IRQ_SHPI_START + 26) -#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29) -#define IRQ_MSP0 (IRQ_SHPI_START + 31) -#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32) -#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33) -#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34) -#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35) -#define IRQ_AB8500 (IRQ_SHPI_START + 40) -#define IRQ_PRCMU (IRQ_SHPI_START + 47) -#define IRQ_DISP (IRQ_SHPI_START + 48) -#define IRQ_SiPI3 (IRQ_SHPI_START + 49) -#define IRQ_I2C4 (IRQ_SHPI_START + 51) -#define IRQ_SSP1 (IRQ_SHPI_START + 52) -#define IRQ_I2C2 (IRQ_SHPI_START + 55) -#define IRQ_SDMMC0 (IRQ_SHPI_START + 60) -#define IRQ_MSP1 (IRQ_SHPI_START + 62) -#define IRQ_SPI1 (IRQ_SHPI_START + 96) -#define IRQ_MSP2 (IRQ_SHPI_START + 98) -#define IRQ_SDMMC4 (IRQ_SHPI_START + 99) -#define IRQ_HSIRD0 (IRQ_SHPI_START + 104) -#define IRQ_HSIRD1 (IRQ_SHPI_START + 105) -#define IRQ_HSITD0 (IRQ_SHPI_START + 106) -#define IRQ_HSITD1 (IRQ_SHPI_START + 107) -#define IRQ_GPIO0 (IRQ_SHPI_START + 119) -#define IRQ_GPIO1 (IRQ_SHPI_START + 120) -#define IRQ_GPIO2 (IRQ_SHPI_START + 121) -#define IRQ_GPIO3 (IRQ_SHPI_START + 122) -#define IRQ_GPIO4 (IRQ_SHPI_START + 123) -#define IRQ_GPIO5 (IRQ_SHPI_START + 124) -#define IRQ_GPIO6 (IRQ_SHPI_START + 125) -#define IRQ_GPIO7 (IRQ_SHPI_START + 126) -#define IRQ_GPIO8 (IRQ_SHPI_START + 127) /* There are 128 shared peripheral interrupts assigned to * INTID[160:32]. The first 32 interrupts are reserved. diff --git a/arch/arm/mach-ux500/include/mach/mbox.h b/arch/arm/mach-ux500/include/mach/mbox-db5500.h index 7f9da4d2fbd..7f9da4d2fbd 100644 --- a/arch/arm/mach-ux500/include/mach/mbox.h +++ b/arch/arm/mach-ux500/include/mach/mbox-db5500.h diff --git a/arch/arm/mach-ux500/include/mach/prcmu-defs.h b/arch/arm/mach-ux500/include/mach/prcmu-defs.h new file mode 100644 index 00000000000..848ba64b561 --- /dev/null +++ b/arch/arm/mach-ux500/include/mach/prcmu-defs.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 + * + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * Author: Martin Persson <martin.persson@stericsson.com> + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit definitions + */ + +#ifndef __MACH_PRCMU_DEFS_H +#define __MACH_PRCMU_DEFS_H + +enum prcmu_cpu_opp { + CPU_OPP_INIT = 0x00, + CPU_OPP_NO_CHANGE = 0x01, + CPU_OPP_100 = 0x02, + CPU_OPP_50 = 0x03, + CPU_OPP_MAX = 0x04, + CPU_OPP_EXT_CLK = 0x07 +}; +enum prcmu_ape_opp { + APE_OPP_NO_CHANGE = 0x00, + APE_OPP_100 = 0x02, + APE_OPP_50 = 0x03, +}; + +#endif /* __MACH_PRCMU_DEFS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h index 8885f39a642..455467e8879 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu-regs.h +++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h @@ -1,10 +1,15 @@ /* - * Copyright (c) 2009 ST-Ericsson SA + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 - * as published by the Free Software Foundation. + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * + * License Terms: GNU General Public License v2 + * + * PRCM Unit registers */ + #ifndef __MACH_PRCMU_REGS_H #define __MACH_PRCMU_REGS_H @@ -88,4 +93,4 @@ /* Miscellaneous unit registers */ #define PRCM_DSI_SW_RESET (_PRCMU_BASE + 0x324) -#endif /* __MACH_PRCMU__REGS_H */ +#endif /* __MACH_PRCMU_REGS_H */ diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h index 549843ff6db..c49e456162e 100644 --- a/arch/arm/mach-ux500/include/mach/prcmu.h +++ b/arch/arm/mach-ux500/include/mach/prcmu.h @@ -2,14 +2,27 @@ * Copyright (C) STMicroelectronics 2009 * Copyright (C) ST-Ericsson SA 2010 * + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * Author: Sundar Iyer <sundar.iyer@stericsson.com> + * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> + * * License Terms: GNU General Public License v2 * - * PRCMU f/w APIs + * PRCM Unit f/w API */ #ifndef __MACH_PRCMU_H #define __MACH_PRCMU_H +#include <mach/prcmu-defs.h> +void __init prcmu_early_init(void); int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size); int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size); +int prcmu_set_ape_opp(enum prcmu_ape_opp opp); +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp); +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp); +int prcmu_get_ape_opp(void); +int prcmu_get_cpu_opp(void); +bool prcmu_has_arm_maxopp(void); #endif /* __MACH_PRCMU_H */ diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h index 54bbe648bf5..469877e0de9 100644 --- a/arch/arm/mach-ux500/include/mach/setup.h +++ b/arch/arm/mach-ux500/include/mach/setup.h @@ -18,14 +18,19 @@ extern void __init ux500_map_io(void); extern void __init u5500_map_io(void); extern void __init u8500_map_io(void); -extern void __init ux500_init_devices(void); extern void __init u5500_init_devices(void); extern void __init u8500_init_devices(void); extern void __init ux500_init_irq(void); + +extern void __init u5500_sdi_init(void); + +extern void __init db5500_dma_init(void); + /* We re-use nomadik_timer for this platform */ extern void nmdk_timer_init(void); +struct amba_device; extern void __init amba_add_devices(struct amba_device *devs[], int num); struct sys_timer; diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 0271ca0a83d..9a6614c6808 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -19,38 +19,43 @@ #define __ASM_ARCH_UNCOMPRESS_H #include <asm/setup.h> +#include <asm/mach-types.h> #include <linux/io.h> +#include <linux/amba/serial.h> #include <mach/hardware.h> -#define U8500_UART_DR 0x80007000 -#define U8500_UART_LCRH 0x8000702c -#define U8500_UART_CR 0x80007030 -#define U8500_UART_FR 0x80007018 +static u32 ux500_uart_base; static void putc(const char c) { /* Do nothing if the UART is not enabled. */ - if (!(__raw_readb(U8500_UART_CR) & 0x1)) + if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) return; if (c == '\n') putc('\r'); - while (__raw_readb(U8500_UART_FR) & (1 << 5)) + while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 5)) barrier(); - __raw_writeb(c, U8500_UART_DR); + __raw_writeb(c, ux500_uart_base + UART01x_DR); } static void flush(void) { - if (!(__raw_readb(U8500_UART_CR) & 0x1)) + if (!(__raw_readb(ux500_uart_base + UART011_CR) & 0x1)) return; - while (__raw_readb(U8500_UART_FR) & (1 << 3)) + while (__raw_readb(ux500_uart_base + UART01x_FR) & (1 << 3)) barrier(); } static inline void arch_decomp_setup(void) { + if (machine_is_u8500()) + ux500_uart_base = U8500_UART2_BASE; + else if (machine_is_u5500()) + ux500_uart_base = U5500_UART0_BASE; + else /* not much can be done to help here */ + ux500_uart_base = U8500_UART2_BASE; } #define arch_decomp_wdog() /* nothing to do here */ diff --git a/arch/arm/mach-ux500/mbox.c b/arch/arm/mach-ux500/mbox-db5500.c index 63435389c54..cbf15718fc3 100644 --- a/arch/arm/mach-ux500/mbox.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -38,7 +38,7 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/completion.h> -#include <mach/mbox.h> +#include <mach/mbox-db5500.h> #define MBOX_NAME "mbox" diff --git a/arch/arm/mach-ux500/modem_irq.c b/arch/arm/mach-ux500/modem-irq-db5500.c index 3187f887116..3187f887116 100644 --- a/arch/arm/mach-ux500/modem_irq.c +++ b/arch/arm/mach-ux500/modem-irq-db5500.c diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 9e4c678de78..ade2e17f253 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -26,7 +26,7 @@ * control for which core is the next to come out of the secondary * boot "holding pen" */ -volatile int __cpuinitdata pen_release = -1; +volatile int pen_release = -1; static unsigned int __init get_core_count(void) { diff --git a/arch/arm/mach-ux500/prcmu.c b/arch/arm/mach-ux500/prcmu.c index 293274d1342..c522d26ef34 100644 --- a/arch/arm/mach-ux500/prcmu.c +++ b/arch/arm/mach-ux500/prcmu.c @@ -1,10 +1,14 @@ /* - * Copyright (C) ST Ericsson SA 2010 + * Copyright (C) STMicroelectronics 2009 + * Copyright (C) ST-Ericsson SA 2010 * * License Terms: GNU General Public License v2 + * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com> + * Author: Sundar Iyer <sundar.iyer@stericsson.com> * Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com> * - * U8500 PRCMU driver. + * U8500 PRCM Unit interface driver + * */ #include <linux/kernel.h> #include <linux/module.h> @@ -19,11 +23,26 @@ #include <mach/hardware.h> #include <mach/prcmu-regs.h> +#include <mach/prcmu-defs.h> + +/* Global var to runtime determine TCDM base for v2 or v1 */ +static __iomem void *tcdm_base; + +#define _MBOX_HEADER (tcdm_base + 0xFE8) +#define MBOX_HEADER_REQ_MB0 (_MBOX_HEADER + 0x0) + +#define REQ_MB1 (tcdm_base + 0xFD0) +#define REQ_MB5 (tcdm_base + 0xE44) -#define PRCMU_TCDM_BASE __io_address(U8500_PRCMU_TCDM_BASE) +#define REQ_MB1_ARMOPP (REQ_MB1 + 0x0) +#define REQ_MB1_APEOPP (REQ_MB1 + 0x1) +#define REQ_MB1_BOOSTOPP (REQ_MB1 + 0x2) -#define REQ_MB5 (PRCMU_TCDM_BASE + 0xE44) -#define ACK_MB5 (PRCMU_TCDM_BASE + 0xDF4) +#define ACK_MB1 (tcdm_base + 0xE04) +#define ACK_MB5 (tcdm_base + 0xDF4) + +#define ACK_MB1_CURR_ARMOPP (ACK_MB1 + 0x0) +#define ACK_MB1_CURR_APEOPP (ACK_MB1 + 0x1) #define REQ_MB5_I2C_SLAVE_OP (REQ_MB5) #define REQ_MB5_I2C_HW_BITS (REQ_MB5 + 1) @@ -33,10 +52,33 @@ #define ACK_MB5_I2C_STATUS (ACK_MB5 + 1) #define ACK_MB5_I2C_VAL (ACK_MB5 + 3) -#define I2C_WRITE(slave) ((slave) << 1) -#define I2C_READ(slave) (((slave) << 1) | BIT(0)) +#define PRCM_AVS_VARM_MAX_OPP (tcdm_base + 0x2E4) +#define PRCM_AVS_ISMODEENABLE 7 +#define PRCM_AVS_ISMODEENABLE_MASK (1 << PRCM_AVS_ISMODEENABLE) + +#define I2C_WRITE(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define I2C_READ(slave) \ + (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0) | BIT(0)) #define I2C_STOP_EN BIT(3) +enum mb1_h { + MB1H_ARM_OPP = 1, + MB1H_APE_OPP, + MB1H_ARM_APE_OPP, +}; + +static struct { + struct mutex lock; + struct completion work; + struct { + u8 arm_opp; + u8 ape_opp; + u8 arm_status; + u8 ape_status; + } ack; +} mb1_transfer; + enum ack_mb5_status { I2C_WR_OK = 0x01, I2C_RD_OK = 0x02, @@ -145,6 +187,104 @@ unlock_and_return: } EXPORT_SYMBOL(prcmu_abb_write); +static int set_ape_cpu_opps(u8 header, enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + bool do_ape; + bool do_arm; + int err = 0; + + do_ape = ((header == MB1H_APE_OPP) || (header == MB1H_ARM_APE_OPP)); + do_arm = ((header == MB1H_ARM_OPP) || (header == MB1H_ARM_APE_OPP)); + + mutex_lock(&mb1_transfer.lock); + + while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1)) + cpu_relax(); + + writeb(0, MBOX_HEADER_REQ_MB0); + writeb(cpu_opp, REQ_MB1_ARMOPP); + writeb(ape_opp, REQ_MB1_APEOPP); + writeb(0, REQ_MB1_BOOSTOPP); + writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET); + wait_for_completion(&mb1_transfer.work); + if ((do_ape) && (mb1_transfer.ack.ape_status != 0)) + err = -EIO; + if ((do_arm) && (mb1_transfer.ack.arm_status != 0)) + err = -EIO; + + mutex_unlock(&mb1_transfer.lock); + + return err; +} + +/** + * prcmu_set_ape_opp() - Set the OPP of the APE. + * @opp: The OPP to set. + * + * This function sets the OPP of the APE. + */ +int prcmu_set_ape_opp(enum prcmu_ape_opp opp) +{ + return set_ape_cpu_opps(MB1H_APE_OPP, opp, APE_OPP_NO_CHANGE); +} +EXPORT_SYMBOL(prcmu_set_ape_opp); + +/** + * prcmu_set_cpu_opp() - Set the OPP of the CPU. + * @opp: The OPP to set. + * + * This function sets the OPP of the CPU. + */ +int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp) +{ + return set_ape_cpu_opps(MB1H_ARM_OPP, CPU_OPP_NO_CHANGE, opp); +} +EXPORT_SYMBOL(prcmu_set_cpu_opp); + +/** + * prcmu_set_ape_cpu_opps() - Set the OPPs of the APE and the CPU. + * @ape_opp: The APE OPP to set. + * @cpu_opp: The CPU OPP to set. + * + * This function sets the OPPs of the APE and the CPU. + */ +int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp, + enum prcmu_cpu_opp cpu_opp) +{ + return set_ape_cpu_opps(MB1H_ARM_APE_OPP, ape_opp, cpu_opp); +} +EXPORT_SYMBOL(prcmu_set_ape_cpu_opps); + +/** + * prcmu_get_ape_opp() - Get the OPP of the APE. + * + * This function gets the OPP of the APE. + */ +enum prcmu_ape_opp prcmu_get_ape_opp(void) +{ + return readb(ACK_MB1_CURR_APEOPP); +} +EXPORT_SYMBOL(prcmu_get_ape_opp); + +/** + * prcmu_get_cpu_opp() - Get the OPP of the CPU. + * + * This function gets the OPP of the CPU. The OPP is specified in %%. + * PRCMU_OPP_EXT is a special OPP value, not specified in %%. + */ +int prcmu_get_cpu_opp(void) +{ + return readb(ACK_MB1_CURR_ARMOPP); +} +EXPORT_SYMBOL(prcmu_get_cpu_opp); + +bool prcmu_has_arm_maxopp(void) +{ + return (readb(PRCM_AVS_VARM_MAX_OPP) & PRCM_AVS_ISMODEENABLE_MASK) + == PRCM_AVS_ISMODEENABLE_MASK; +} + static void read_mailbox_0(void) { writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR); @@ -152,6 +292,9 @@ static void read_mailbox_0(void) static void read_mailbox_1(void) { + mb1_transfer.ack.arm_opp = readb(ACK_MB1_CURR_ARMOPP); + mb1_transfer.ack.ape_opp = readb(ACK_MB1_CURR_APEOPP); + complete(&mb1_transfer.work); writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR); } @@ -217,15 +360,35 @@ static irqreturn_t prcmu_irq_handler(int irq, void *data) return IRQ_HANDLED; } +void __init prcmu_early_init(void) +{ + if (cpu_is_u8500v11() || cpu_is_u8500ed()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE_V1); + } else if (cpu_is_u8500v2()) { + tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); + } else { + pr_err("prcmu: Unsupported chip version\n"); + BUG(); + } +} + static int __init prcmu_init(void) { + if (cpu_is_u8500ed()) { + pr_err("prcmu: Unsupported chip version\n"); + return 0; + } + + mutex_init(&mb1_transfer.lock); + init_completion(&mb1_transfer.work); mutex_init(&mb5_transfer.lock); init_completion(&mb5_transfer.work); /* Clean up the mailbox interrupts after pre-kernel code. */ writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR); - return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL); + return request_irq(IRQ_DB8500_PRCMU1, prcmu_irq_handler, 0, + "prcmu", NULL); } arch_initcall(prcmu_init); diff --git a/arch/arm/plat-nomadik/gpio.c b/arch/arm/plat-nomadik/gpio.c index 85e6fd212a4..eda4e3a11a3 100644 --- a/arch/arm/plat-nomadik/gpio.c +++ b/arch/arm/plat-nomadik/gpio.c @@ -119,7 +119,7 @@ static void __nmk_gpio_make_output(struct nmk_gpio_chip *nmk_chip, } static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, - pin_cfg_t cfg) + pin_cfg_t cfg, bool sleep) { static const char *afnames[] = { [NMK_GPIO_ALT_GPIO] = "GPIO", @@ -145,11 +145,34 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, int output = PIN_DIR(cfg); int val = PIN_VAL(cfg); - dev_dbg(nmk_chip->chip.dev, "pin %d: af %s, pull %s, slpm %s (%s%s)\n", - pin, afnames[af], pullnames[pull], slpmnames[slpm], + dev_dbg(nmk_chip->chip.dev, "pin %d [%#lx]: af %s, pull %s, slpm %s (%s%s)\n", + pin, cfg, afnames[af], pullnames[pull], slpmnames[slpm], output ? "output " : "input", output ? (val ? "high" : "low") : ""); + if (sleep) { + int slpm_pull = PIN_SLPM_PULL(cfg); + int slpm_output = PIN_SLPM_DIR(cfg); + int slpm_val = PIN_SLPM_VAL(cfg); + + /* + * The SLPM_* values are normal values + 1 to allow zero to + * mean "same as normal". + */ + if (slpm_pull) + pull = slpm_pull - 1; + if (slpm_output) + output = slpm_output - 1; + if (slpm_val) + val = slpm_val - 1; + + dev_dbg(nmk_chip->chip.dev, "pin %d: sleep pull %s, dir %s, val %s\n", + pin, + slpm_pull ? pullnames[pull] : "same", + slpm_output ? (output ? "output" : "input") : "same", + slpm_val ? (val ? "high" : "low") : "same"); + } + if (output) __nmk_gpio_make_output(nmk_chip, offset, val); else { @@ -175,7 +198,7 @@ static void __nmk_config_pin(struct nmk_gpio_chip *nmk_chip, unsigned offset, * side-effects. The gpio can be manipulated later using standard GPIO API * calls. */ -int nmk_config_pin(pin_cfg_t cfg) +int nmk_config_pin(pin_cfg_t cfg, bool sleep) { struct nmk_gpio_chip *nmk_chip; int gpio = PIN_NUM(cfg); @@ -186,7 +209,7 @@ int nmk_config_pin(pin_cfg_t cfg) return -EINVAL; spin_lock_irqsave(&nmk_chip->lock, flags); - __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg); + __nmk_config_pin(nmk_chip, gpio - nmk_chip->chip.base, cfg, sleep); spin_unlock_irqrestore(&nmk_chip->lock, flags); return 0; @@ -207,7 +230,7 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num) int i; for (i = 0; i < num; i++) { - int ret = nmk_config_pin(cfgs[i]); + ret = nmk_config_pin(cfgs[i], false); if (ret) break; } @@ -216,6 +239,21 @@ int nmk_config_pins(pin_cfg_t *cfgs, int num) } EXPORT_SYMBOL(nmk_config_pins); +int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num) +{ + int ret = 0; + int i; + + for (i = 0; i < num; i++) { + ret = nmk_config_pin(cfgs[i], true); + if (ret) + break; + } + + return ret; +} +EXPORT_SYMBOL(nmk_config_pins_sleep); + /** * nmk_gpio_set_slpm() - configure the sleep mode of a pin * @gpio: pin number @@ -634,7 +672,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev) chip = &nmk_chip->chip; chip->base = pdata->first_gpio; - chip->label = pdata->name; + chip->label = pdata->name ?: dev_name(&dev->dev); chip->dev = &dev->dev; chip->owner = THIS_MODULE; diff --git a/arch/arm/plat-nomadik/include/plat/pincfg.h b/arch/arm/plat-nomadik/include/plat/pincfg.h index 8c5ae3f2acf..05a3936ae6d 100644 --- a/arch/arm/plat-nomadik/include/plat/pincfg.h +++ b/arch/arm/plat-nomadik/include/plat/pincfg.h @@ -19,16 +19,22 @@ * bit 9..10 - Alternate Function Selection * bit 11..12 - Pull up/down state * bit 13 - Sleep mode behaviour - * bit 14 - (sleep mode) Direction - * bit 15 - (sleep mode) Value (if output) + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) * * to facilitate the definition, the following macros are provided * * PIN_CFG_DEFAULT - default config (0): * pull up/down = disabled * sleep mode = input/wakeup - * (sleep mode) direction = input - * (sleep mode) value = low + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal * * PIN_CFG - default config with alternate function * PIN_CFG_PULL - default config with alternate function and pull up/down @@ -75,30 +81,64 @@ typedef unsigned long pin_cfg_t; #define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) #define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) -/* Shortcuts. Use these instead of separate DIR and VAL. */ -#define PIN_INPUT PIN_DIR_INPUT +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) #define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) #define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) -/* - * These are the same as the ones above, but should make more sense to the - * reader when seen along with a setting a pin to AF mode. - */ -#define PIN_SLPM_INPUT PIN_INPUT -#define PIN_SLPM_OUTPUT_LOW PIN_OUTPUT_LOW -#define PIN_SLPM_OUTPUT_HIGH PIN_OUTPUT_HIGH +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) -#define PIN_CFG_DEFAULT (PIN_PULL_NONE | PIN_SLPM_INPUT) +#define PIN_CFG_DEFAULT (0) #define PIN_CFG(num, alt) \ (PIN_CFG_DEFAULT |\ (PIN_NUM(num) | PIN_##alt)) +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + #define PIN_CFG_PULL(num, alt, pull) \ ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\ (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull)) -extern int nmk_config_pin(pin_cfg_t cfg); +extern int nmk_config_pin(pin_cfg_t cfg, bool sleep); extern int nmk_config_pins(pin_cfg_t *cfgs, int num); +extern int nmk_config_pins_sleep(pin_cfg_t *cfgs, int num); #endif |