summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf533
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf533')
-rw-r--r--arch/blackfin/mach-bf533/boards/H8606.c8
-rw-r--r--arch/blackfin/mach-bf533/boards/ip0x.c15
-rw-r--r--arch/blackfin/mach-bf533/boards/stamp.c6
-rw-r--r--arch/blackfin/mach-bf533/include/mach/defBF532.h115
4 files changed, 2 insertions, 142 deletions
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 43f43a095a9..4adceb0bdb6 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -166,7 +166,6 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
/* SPI ADC chip */
static struct bfin5xx_spi_chip spi_adc_chip_info = {
- .ctl_reg = 0x1000,
.enable_dma = 1, /* use dma transfer with this chip*/
.bits_per_word = 16,
};
@@ -174,7 +173,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
- .ctl_reg = 0x1000,
.enable_dma = 0,
.bits_per_word = 16,
};
@@ -258,12 +256,6 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index 644be5e5ab6..8ec42ba35b9 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -20,6 +20,7 @@
#endif
#include <asm/irq.h>
#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
/*
* Name the Board for the /proc/cpuinfo
@@ -107,20 +108,6 @@ static struct platform_device dm9000_device2 = {
#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
static struct bfin5xx_spi_chip mmc_spi_chip_info = {
-/*
- * CPOL (Clock Polarity)
- * 0 - Active high SCK
- * 1 - Active low SCK
- * CPHA (Clock Phase) Selects transfer format and operation mode
- * 0 - SCLK toggles from middle of the first data bit, slave select
- * pins controlled by hardware.
- * 1 - SCLK toggles from beginning of first data bit, slave select
- * pins controller by user software.
- * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work
- * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0
- * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1
- */
- .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */
.enable_dma = 0, /* if 1 - block!!! */
.bits_per_word = 8,
};
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 82f70efd66e..6d68dcfa2da 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -321,12 +321,6 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-fb",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
{
diff --git a/arch/blackfin/mach-bf533/include/mach/defBF532.h b/arch/blackfin/mach-bf533/include/mach/defBF532.h
index 02b328eb0e0..e9ff491c095 100644
--- a/arch/blackfin/mach-bf533/include/mach/defBF532.h
+++ b/arch/blackfin/mach-bf533/include/mach/defBF532.h
@@ -370,72 +370,6 @@
/* System MMR Register Bits */
/******************************************************************************* */
-/* ********************* PLL AND RESET MASKS ************************ */
-
-/* PLL_CTL Masks */
-#define PLL_CLKIN 0x0000 /* Pass CLKIN to PLL */
-#define PLL_CLKIN_DIV2 0x0001 /* Pass CLKIN/2 to PLL */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* Shut off PLL clocks */
-#define STOPCK_OFF 0x0008 /* Core clock off */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Put the PLL in a Deep Sleep state */
-#if !defined(__ADSPBF538__)
-/* this file is included in defBF538.h but IN_DELAY/OUT_DELAY are different */
-# define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-# define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#endif
-#define BYPASS 0x0100 /* Bypass the PLL */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-
-#define SCLK_DIV(x) (x) /* SCLK = VCO / x */
-
-#define CCLK_DIV1 0x00000000 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 0x00000010 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 0x00000020 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 0x00000030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
-
-/* VR_CTL Masks */
-#define FREQ 0x0003 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-#define FREQ_333 0x0001 /* Switching Frequency Is 333 kHz */
-#define FREQ_667 0x0002 /* Switching Frequency Is 667 kHz */
-#define FREQ_1000 0x0003 /* Switching Frequency Is 1 MHz */
-
-#define GAIN 0x000C /* Voltage Level Gain */
-#define GAIN_5 0x0000 /* GAIN = 5 */
-#define GAIN_10 0x0004 /* GAIN = 10 */
-#define GAIN_20 0x0008 /* GAIN = 20 */
-#define GAIN_50 0x000C /* GAIN = 50 */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define SCKELOW 0x8000 /* Do Not Drive SCKE High During Reset After Hibernate */
-
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
#define CHIPID_FAMILY 0x0FFFF000
@@ -703,54 +637,7 @@
/* ********** DMA CONTROLLER MASKS *********************8 */
-/*DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x00000001 /* Channel Enable */
-#define WNR 0x00000002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x00000000 /* Word Size 8 bits */
-#define WDSIZE_16 0x00000004 /* Word Size 16 bits */
-#define WDSIZE_32 0x00000008 /* Word Size 32 bits */
-#define DMA2D 0x00000010 /* 2D/1D* Mode */
-#define RESTART 0x00000020 /* Restart */
-#define DI_SEL 0x00000040 /* Data Interrupt Select */
-#define DI_EN 0x00000080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x00000900 /* Next Descriptor Size */
-#define DMAFLOW 0x00007000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
-
-#define DMAEN_P 0 /* Channel Enable */
-#define WNR_P 1 /* Channel Direction (W/R*) */
-#define DMA2D_P 4 /* 2D/1D* Mode */
-#define RESTART_P 5 /* Restart */
-#define DI_SEL_P 6 /* Data Interrupt Select */
-#define DI_EN_P 7 /* Data Interrupt Enable */
-
-/*DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-
-#define DMA_DONE 0x00000001 /* DMA Done Indicator */
-#define DMA_ERR 0x00000002 /* DMA Error Indicator */
-#define DFETCH 0x00000004 /* Descriptor Fetch Indicator */
-#define DMA_RUN 0x00000008 /* DMA Running Indicator */
-
-#define DMA_DONE_P 0 /* DMA Done Indicator */
-#define DMA_ERR_P 1 /* DMA Error Indicator */
-#define DFETCH_P 2 /* Descriptor Fetch Indicator */
-#define DMA_RUN_P 3 /* DMA Running Indicator */
-
-/*DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
+/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-02 17:02:02 +0000