summaryrefslogtreecommitdiffstats
path: root/arch/cris/arch-v10
diff options
context:
space:
mode:
Diffstat (limited to 'arch/cris/arch-v10')
-rw-r--r--arch/cris/arch-v10/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/Kconfig2
-rw-r--r--arch/cris/arch-v10/drivers/eeprom.c6
-rw-r--r--arch/cris/arch-v10/drivers/i2c.c2
-rw-r--r--arch/cris/arch-v10/kernel/kgdb.c2
-rw-r--r--arch/cris/arch-v10/lib/old_checksum.c62
6 files changed, 39 insertions, 37 deletions
diff --git a/arch/cris/arch-v10/Kconfig b/arch/cris/arch-v10/Kconfig
index 44eb1b9accb..c7ea9efd010 100644
--- a/arch/cris/arch-v10/Kconfig
+++ b/arch/cris/arch-v10/Kconfig
@@ -323,7 +323,7 @@ config ETRAX_DEF_R_WAITSTATES
depends on ETRAX_ARCH_V10
default "95a6"
help
- Waitstates for SRAM, Flash and peripherials (not DRAM). 95f8 is a
+ Waitstates for SRAM, Flash and peripherals (not DRAM). 95f8 is a
good choice for most Axis products...
config ETRAX_DEF_R_BUS_CONFIG
diff --git a/arch/cris/arch-v10/drivers/Kconfig b/arch/cris/arch-v10/drivers/Kconfig
index 734d5f3a530..e7e724bc0ba 100644
--- a/arch/cris/arch-v10/drivers/Kconfig
+++ b/arch/cris/arch-v10/drivers/Kconfig
@@ -839,7 +839,7 @@ config ETRAX_DS1302_TRICKLE_CHARGE
default "0"
help
This controls the initial value of the trickle charge register.
- 0 = disabled (use this if you are unsure or have a non rechargable battery)
+ 0 = disabled (use this if you are unsure or have a non rechargeable battery)
Otherwise the following values can be OR:ed together to control the
charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm
diff --git a/arch/cris/arch-v10/drivers/eeprom.c b/arch/cris/arch-v10/drivers/eeprom.c
index 6e1f191a71e..284ebfda03f 100644
--- a/arch/cris/arch-v10/drivers/eeprom.c
+++ b/arch/cris/arch-v10/drivers/eeprom.c
@@ -1,7 +1,7 @@
/*!*****************************************************************************
*!
-*! Implements an interface for i2c compatible eeproms to run under linux.
-*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustents by
+*! Implements an interface for i2c compatible eeproms to run under Linux.
+*! Supports 2k, 8k(?) and 16k. Uses adaptive timing adjustments by
*! Johan.Adolfsson@axis.com
*!
*! Probing results:
@@ -51,7 +51,7 @@
*! Revision 1.8 2001/06/15 13:24:29 jonashg
*! * Added verification of pointers from userspace in read and write.
*! * Made busy counter volatile.
-*! * Added define for inital write delay.
+*! * Added define for initial write delay.
*! * Removed warnings by using loff_t instead of unsigned long.
*!
*! Revision 1.7 2001/06/14 15:26:54 jonashg
diff --git a/arch/cris/arch-v10/drivers/i2c.c b/arch/cris/arch-v10/drivers/i2c.c
index 6114596c3b3..092c724a645 100644
--- a/arch/cris/arch-v10/drivers/i2c.c
+++ b/arch/cris/arch-v10/drivers/i2c.c
@@ -47,7 +47,7 @@
*! Update Port B register and shadow even when running with hardware support
*! to avoid glitches when reading bits
*! Never set direction to out in i2c_inbyte
-*! Removed incorrect clock togling at end of i2c_inbyte
+*! Removed incorrect clock toggling at end of i2c_inbyte
*!
*! Revision 1.8 2002/08/13 06:31:53 starvik
*! Made SDA and SCL line configurable
diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c
index 34528da9881..07628a13c6c 100644
--- a/arch/cris/arch-v10/kernel/kgdb.c
+++ b/arch/cris/arch-v10/kernel/kgdb.c
@@ -33,7 +33,7 @@
*!
*! Revision 1.2 2002/11/19 14:35:24 starvik
*! Changes from linux 2.4
-*! Changed struct initializer syntax to the currently prefered notation
+*! Changed struct initializer syntax to the currently preferred notation
*!
*! Revision 1.1 2001/12/17 13:59:27 bjornw
*! Initial revision
diff --git a/arch/cris/arch-v10/lib/old_checksum.c b/arch/cris/arch-v10/lib/old_checksum.c
index 22a6f0aa9ce..497634a6482 100644
--- a/arch/cris/arch-v10/lib/old_checksum.c
+++ b/arch/cris/arch-v10/lib/old_checksum.c
@@ -47,39 +47,41 @@
#include <asm/delay.h>
-unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum)
+__wsum csum_partial(const void *p, int len, __wsum __sum)
{
- /*
- * Experiments with ethernet and slip connections show that buff
- * is aligned on either a 2-byte or 4-byte boundary.
- */
- const unsigned char *endMarker = buff + len;
- const unsigned char *marker = endMarker - (len % 16);
+ u32 sum = (__force u32)__sum;
+ const u16 *buff = p;
+ /*
+ * Experiments with ethernet and slip connections show that buff
+ * is aligned on either a 2-byte or 4-byte boundary.
+ */
+ const void *endMarker = p + len;
+ const void *marker = endMarker - (len % 16);
#if 0
- if((int)buff & 0x3)
- printk("unaligned buff %p\n", buff);
- __delay(900); /* extra delay of 90 us to test performance hit */
+ if((int)buff & 0x3)
+ printk("unaligned buff %p\n", buff);
+ __delay(900); /* extra delay of 90 us to test performance hit */
#endif
- BITON;
- while (buff < marker) {
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- sum += *((unsigned short *)buff)++;
- }
- marker = endMarker - (len % 2);
- while(buff < marker) {
- sum += *((unsigned short *)buff)++;
- }
- if(endMarker - buff > 0) {
- sum += *buff; /* add extra byte seperately */
- }
- BITOFF;
- return(sum);
+ BITON;
+ while (buff < marker) {
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ sum += *buff++;
+ }
+ marker = endMarker - (len % 2);
+ while (buff < marker)
+ sum += *buff++;
+
+ if (endMarker > buff)
+ sum += *(const u8 *)buff; /* add extra byte seperately */
+
+ BITOFF;
+ return (__force __wsum)sum;
}
EXPORT_SYMBOL(csum_partial);