diff options
Diffstat (limited to 'arch/m68k/include/asm/mcfgpio.h')
| -rw-r--r-- | arch/m68k/include/asm/mcfgpio.h | 343 |
1 files changed, 275 insertions, 68 deletions
diff --git a/arch/m68k/include/asm/mcfgpio.h b/arch/m68k/include/asm/mcfgpio.h index fe468eaa51e..fa1059f50df 100644 --- a/arch/m68k/include/asm/mcfgpio.h +++ b/arch/m68k/include/asm/mcfgpio.h @@ -16,82 +16,289 @@ #ifndef mcfgpio_h #define mcfgpio_h -#include <linux/io.h> +#ifdef CONFIG_GPIOLIB #include <asm-generic/gpio.h> +#else + +int __mcfgpio_get_value(unsigned gpio); +void __mcfgpio_set_value(unsigned gpio, int value); +int __mcfgpio_direction_input(unsigned gpio); +int __mcfgpio_direction_output(unsigned gpio, int value); +int __mcfgpio_request(unsigned gpio); +void __mcfgpio_free(unsigned gpio); + +/* our alternate 'gpiolib' functions */ +static inline int __gpio_get_value(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_get_value(gpio); + else + return -EINVAL; +} + +static inline void __gpio_set_value(unsigned gpio, int value) +{ + if (gpio < MCFGPIO_PIN_MAX) + __mcfgpio_set_value(gpio, value); +} + +static inline int __gpio_cansleep(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return 0; + else + return -EINVAL; +} + +static inline int __gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int gpio_direction_input(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_direction_input(gpio); + else + return -EINVAL; +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_direction_output(gpio, value); + else + return -EINVAL; +} + +static inline int gpio_request(unsigned gpio, const char *label) +{ + if (gpio < MCFGPIO_PIN_MAX) + return __mcfgpio_request(gpio); + else + return -EINVAL; +} + +static inline void gpio_free(unsigned gpio) +{ + if (gpio < MCFGPIO_PIN_MAX) + __mcfgpio_free(gpio); +} + +#endif /* CONFIG_GPIOLIB */ -struct mcf_gpio_chip { - struct gpio_chip gpio_chip; - void __iomem *pddr; - void __iomem *podr; - void __iomem *ppdr; - void __iomem *setr; - void __iomem *clrr; - const u8 *gpio_to_pinmux; -}; - -extern struct mcf_gpio_chip mcf_gpio_chips[]; -extern unsigned int mcf_gpio_chips_size; - -int mcf_gpio_direction_input(struct gpio_chip *, unsigned); -int mcf_gpio_get_value(struct gpio_chip *, unsigned); -int mcf_gpio_direction_output(struct gpio_chip *, unsigned, int); -void mcf_gpio_set_value(struct gpio_chip *, unsigned, int); -void mcf_gpio_set_value_fast(struct gpio_chip *, unsigned, int); -int mcf_gpio_request(struct gpio_chip *, unsigned); -void mcf_gpio_free(struct gpio_chip *, unsigned); /* - * Define macros to ease the pain of setting up the GPIO tables. There - * are two cases we need to deal with here, they cover all currently - * available ColdFire GPIO hardware. There are of course minor differences - * in the layout and number of bits in each ColdFire part, but the macros - * take all that in. + * The Freescale Coldfire family is quite varied in how they implement GPIO. + * Some parts have 8 bit ports, some have 16bit and some have 32bit; some have + * only one port, others have multiple ports; some have a single data latch + * for both input and output, others have a separate pin data register to read + * input; some require a read-modify-write access to change an output, others + * have set and clear registers for some of the outputs; Some have all the + * GPIOs in a single control area, others have some GPIOs implemented in + * different modules. * - * Firstly is the conventional GPIO registers where we toggle individual - * bits in a register, preserving the other bits in the register. For - * lack of a better term I have called this the slow method. + * This implementation attempts accommodate the differences while presenting + * a generic interface that will optimize to as few instructions as possible. + */ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M54xx) || \ + defined(CONFIG_M5441x) + +/* These parts have GPIO organized by 8 bit ports */ + +#define MCFGPIO_PORTTYPE u8 +#define MCFGPIO_PORTSIZE 8 +#define mcfgpio_read(port) __raw_readb(port) +#define mcfgpio_write(data, port) __raw_writeb(data, port) + +#elif defined(CONFIG_M5307) || defined(CONFIG_M5407) || defined(CONFIG_M5272) + +/* These parts have GPIO organized by 16 bit ports */ + +#define MCFGPIO_PORTTYPE u16 +#define MCFGPIO_PORTSIZE 16 +#define mcfgpio_read(port) __raw_readw(port) +#define mcfgpio_write(data, port) __raw_writew(data, port) + +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + +/* These parts have GPIO organized by 32 bit ports */ + +#define MCFGPIO_PORTTYPE u32 +#define MCFGPIO_PORTSIZE 32 +#define mcfgpio_read(port) __raw_readl(port) +#define mcfgpio_write(data, port) __raw_writel(data, port) + +#endif + +#define mcfgpio_bit(gpio) (1 << ((gpio) % MCFGPIO_PORTSIZE)) +#define mcfgpio_port(gpio) ((gpio) / MCFGPIO_PORTSIZE) + +#if defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +/* + * These parts have an 'Edge' Port module (external interrupt/GPIO) which uses + * read-modify-write to change an output and a GPIO module which has separate + * set/clr registers to directly change outputs with a single write access. + */ +#if defined(CONFIG_M528x) +/* + * The 528x also has GPIOs in other modules (GPT, QADC) which use + * read-modify-write as well as those controlled by the EPORT and GPIO modules. */ -#define MCFGPS(mlabel, mbase, mngpio, mpddr, mpodr, mppdr) \ - { \ - .gpio_chip = { \ - .label = #mlabel, \ - .request = mcf_gpio_request, \ - .free = mcf_gpio_free, \ - .direction_input = mcf_gpio_direction_input, \ - .direction_output = mcf_gpio_direction_output,\ - .get = mcf_gpio_get_value, \ - .set = mcf_gpio_set_value, \ - .base = mbase, \ - .ngpio = mngpio, \ - }, \ - .pddr = (void __iomem *) mpddr, \ - .podr = (void __iomem *) mpodr, \ - .ppdr = (void __iomem *) mppdr, \ - } +#define MCFGPIO_SCR_START 40 +#elif defined(CONFIGM5441x) +/* The m5441x EPORT doesn't have its own GPIO port, uses PORT C */ +#define MCFGPIO_SCR_START 0 +#else +#define MCFGPIO_SCR_START 8 +#endif +#define MCFGPIO_SETR_PORT(gpio) (MCFGPIO_SETR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) + +#define MCFGPIO_CLRR_PORT(gpio) (MCFGPIO_CLRR + \ + mcfgpio_port(gpio - MCFGPIO_SCR_START)) +#else + +#define MCFGPIO_SCR_START MCFGPIO_PIN_MAX +/* with MCFGPIO_SCR == MCFGPIO_PIN_MAX, these will be optimized away */ +#define MCFGPIO_SETR_PORT(gpio) 0 +#define MCFGPIO_CLRR_PORT(gpio) 0 + +#endif /* - * Secondly is the faster case, where we have set and clear registers - * that allow us to set or clear a bit with a single write, not having - * to worry about preserving other bits. + * Coldfire specific helper functions */ -#define MCFGPF(mlabel, mbase, mngpio) \ - { \ - .gpio_chip = { \ - .label = #mlabel, \ - .request = mcf_gpio_request, \ - .free = mcf_gpio_free, \ - .direction_input = mcf_gpio_direction_input, \ - .direction_output = mcf_gpio_direction_output,\ - .get = mcf_gpio_get_value, \ - .set = mcf_gpio_set_value_fast, \ - .base = mbase, \ - .ngpio = mngpio, \ - }, \ - .pddr = (void __iomem *) MCFGPIO_PDDR_##mlabel, \ - .podr = (void __iomem *) MCFGPIO_PODR_##mlabel, \ - .ppdr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \ - .setr = (void __iomem *) MCFGPIO_PPDSDR_##mlabel, \ - .clrr = (void __iomem *) MCFGPIO_PCLRR_##mlabel, \ - } +/* return the port pin data register for a gpio */ +static inline u32 __mcfgpio_ppdr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOREAD; + else + return MCFSIM2_GPIO1READ; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PPDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; #endif +} + +/* return the port output data register for a gpio */ +static inline u32 __mcfgpio_podr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADAT; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADAT; + else if (gpio < 32) + return MCFSIM_PBDAT; + else + return MCFSIM_PCDAT; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOWRITE; + else + return MCFSIM2_GPIO1WRITE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTPORT; + else if (gpio < 24) + return MCFGPTB_GPTPORT; + else if (gpio < 32) + return MCFQADC_PORTQA; + else if (gpio < 40) + return MCFQADC_PORTQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PODR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; +#endif +} + +/* return the port direction data register for a gpio */ +static inline u32 __mcfgpio_pddr(unsigned gpio) +{ +#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || \ + defined(CONFIG_M5307) || defined(CONFIG_M5407) + return MCFSIM_PADDR; +#elif defined(CONFIG_M5272) + if (gpio < 16) + return MCFSIM_PADDR; + else if (gpio < 32) + return MCFSIM_PBDDR; + else + return MCFSIM_PCDDR; +#elif defined(CONFIG_M5249) || defined(CONFIG_M525x) + if (gpio < 32) + return MCFSIM2_GPIOENABLE; + else + return MCFSIM2_GPIO1ENABLE; +#elif defined(CONFIG_M520x) || defined(CONFIG_M523x) || \ + defined(CONFIG_M527x) || defined(CONFIG_M528x) || \ + defined(CONFIG_M532x) || defined(CONFIG_M5441x) +#if !defined(CONFIG_M5441x) + if (gpio < 8) + return MCFEPORT_EPDDR; +#if defined(CONFIG_M528x) + else if (gpio < 16) + return MCFGPTA_GPTDDR; + else if (gpio < 24) + return MCFGPTB_GPTDDR; + else if (gpio < 32) + return MCFQADC_DDRQA; + else if (gpio < 40) + return MCFQADC_DDRQB; +#endif /* defined(CONFIG_M528x) */ + else +#endif /* !defined(CONFIG_M5441x) */ + return MCFGPIO_PDDR + mcfgpio_port(gpio - MCFGPIO_SCR_START); +#else + return 0; +#endif +} + +#endif /* mcfgpio_h */ |