diff options
Diffstat (limited to 'arch/m68knommu/platform/520x/config.c')
| -rw-r--r-- | arch/m68knommu/platform/520x/config.c | 36 |
1 files changed, 18 insertions, 18 deletions
diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c index 71d2ba474c6..621238f1a21 100644 --- a/arch/m68knommu/platform/520x/config.c +++ b/arch/m68knommu/platform/520x/config.c @@ -27,15 +27,15 @@ static struct mcf_platform_uart m520x_uart_platform[] = { { - .mapbase = MCF_MBAR + MCFUART_BASE1, + .mapbase = MCFUART_BASE1, .irq = MCFINT_VECBASE + MCFINT_UART0, }, { - .mapbase = MCF_MBAR + MCFUART_BASE2, + .mapbase = MCFUART_BASE2, .irq = MCFINT_VECBASE + MCFINT_UART1, }, { - .mapbase = MCF_MBAR + MCFUART_BASE3, + .mapbase = MCFUART_BASE3, .irq = MCFINT_VECBASE + MCFINT_UART2, }, { }, @@ -49,8 +49,8 @@ static struct platform_device m520x_uart = { static struct resource m520x_fec_resources[] = { { - .start = MCF_MBAR + 0x30000, - .end = MCF_MBAR + 0x30000 + 0x7ff, + .start = MCFFEC_BASE, + .end = MCFFEC_BASE + MCFFEC_SIZE - 1, .flags = IORESOURCE_MEM, }, { @@ -208,11 +208,11 @@ static void __init m520x_qspi_init(void) { u16 par; /* setup Port QS for QSPI with gpio CS control */ - writeb(0x3f, MCF_IPSBAR + MCF_GPIO_PAR_QSPI); + writeb(0x3f, MCF_GPIO_PAR_QSPI); /* make U1CTS and U2RTS gpio for cs_control */ - par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par = readw(MCF_GPIO_PAR_UART); par &= 0x00ff; - writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); + writew(par, MCF_GPIO_PAR_UART); } #endif /* defined(CONFIG_SPI_COLDFIRE_QSPI) || defined(CONFIG_SPI_COLDFIRE_QSPI_MODULE) */ @@ -234,23 +234,23 @@ static void __init m520x_uart_init_line(int line, int irq) switch (line) { case 0: - par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par = readw(MCF_GPIO_PAR_UART); par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0; - writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); + writew(par, MCF_GPIO_PAR_UART); break; case 1: - par = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + par = readw(MCF_GPIO_PAR_UART); par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1; - writew(par, MCF_IPSBAR + MCF_GPIO_PAR_UART); + writew(par, MCF_GPIO_PAR_UART); break; case 2: - par2 = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + par2 = readb(MCF_GPIO_PAR_FECI2C); par2 &= ~0x0F; par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 | MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2; - writeb(par2, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + writeb(par2, MCF_GPIO_PAR_FECI2C); break; } } @@ -271,11 +271,11 @@ static void __init m520x_fec_init(void) u8 v; /* Set multi-function pins to ethernet mode */ - v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FEC); - writeb(v | 0xf0, MCF_IPSBAR + MCF_GPIO_PAR_FEC); + v = readb(MCF_GPIO_PAR_FEC); + writeb(v | 0xf0, MCF_GPIO_PAR_FEC); - v = readb(MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); - writeb(v | 0x0f, MCF_IPSBAR + MCF_GPIO_PAR_FECI2C); + v = readb(MCF_GPIO_PAR_FECI2C); + writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C); } /***************************************************************************/ |