summaryrefslogtreecommitdiffstats
path: root/arch/mips/cavium-octeon/pci-common.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cavium-octeon/pci-common.c')
-rw-r--r--arch/mips/cavium-octeon/pci-common.c137
1 files changed, 0 insertions, 137 deletions
diff --git a/arch/mips/cavium-octeon/pci-common.c b/arch/mips/cavium-octeon/pci-common.c
deleted file mode 100644
index cd029f88da7..00000000000
--- a/arch/mips/cavium-octeon/pci-common.c
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2005-2007 Cavium Networks
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include "pci-common.h"
-
-typeof(pcibios_map_irq) *octeon_pcibios_map_irq;
-enum octeon_dma_bar_type octeon_dma_bar_type = OCTEON_DMA_BAR_TYPE_INVALID;
-
-/**
- * Map a PCI device to the appropriate interrupt line
- *
- * @param dev The Linux PCI device structure for the device to map
- * @param slot The slot number for this device on __BUS 0__. Linux
- * enumerates through all the bridges and figures out the
- * slot on Bus 0 where this device eventually hooks to.
- * @param pin The PCI interrupt pin read from the device, then swizzled
- * as it goes through each bridge.
- * @return Interrupt number for the device
- */
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (octeon_pcibios_map_irq)
- return octeon_pcibios_map_irq(dev, slot, pin);
- else
- panic("octeon_pcibios_map_irq doesn't point to a "
- "pcibios_map_irq() function");
-}
-
-
-/**
- * Called to perform platform specific PCI setup
- *
- * @param dev
- * @return
- */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- uint16_t config;
- uint32_t dconfig;
- int pos;
- /*
- * Force the Cache line setting to 64 bytes. The standard
- * Linux bus scan doesn't seem to set it. Octeon really has
- * 128 byte lines, but Intel bridges get really upset if you
- * try and set values above 64 bytes. Value is specified in
- * 32bit words.
- */
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 64 / 4);
- /* Set latency timers for all devices */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 48);
-
- /* Enable reporting System errors and parity errors on all devices */
- /* Enable parity checking and error reporting */
- pci_read_config_word(dev, PCI_COMMAND, &config);
- config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- pci_write_config_word(dev, PCI_COMMAND, config);
-
- if (dev->subordinate) {
- /* Set latency timers on sub bridges */
- pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 48);
- /* More bridge error detection */
- pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config);
- config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR;
- pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config);
- }
-
- /* Enable the PCIe normal error reporting */
- pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
- if (pos) {
- /* Update Device Control */
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config);
- /* Correctable Error Reporting */
- config |= PCI_EXP_DEVCTL_CERE;
- /* Non-Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_NFERE;
- /* Fatal Error Reporting */
- config |= PCI_EXP_DEVCTL_FERE;
- /* Unsupported Request */
- config |= PCI_EXP_DEVCTL_URRE;
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config);
- }
-
- /* Find the Advanced Error Reporting capability */
- pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
- if (pos) {
- /* Clear Uncorrectable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS,
- dconfig);
- /* Enable reporting of all uncorrectable errors */
- /* Uncorrectable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0);
- /*
- * Leave severity at HW default. This only controls if
- * errors are reported as uncorrectable or
- * correctable, not if the error is reported.
- */
- /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */
- /* Clear Correctable Error Status */
- pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig);
- /* Enable reporting of all correctable errors */
- /* Correctable Error Mask - turned on bits disable errors */
- pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0);
- /* Advanced Error Capabilities */
- pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig);
- /* ECRC Generation Enable */
- if (config & PCI_ERR_CAP_ECRC_GENC)
- config |= PCI_ERR_CAP_ECRC_GENE;
- /* ECRC Check Enable */
- if (config & PCI_ERR_CAP_ECRC_CHKC)
- config |= PCI_ERR_CAP_ECRC_CHKE;
- pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig);
- /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */
- /* Report all errors to the root complex */
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND,
- PCI_ERR_ROOT_CMD_COR_EN |
- PCI_ERR_ROOT_CMD_NONFATAL_EN |
- PCI_ERR_ROOT_CMD_FATAL_EN);
- /* Clear the Root status register */
- pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig);
- pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
- }
-
- return 0;
-}