diff options
Diffstat (limited to 'arch/mips/include/asm/sn/klconfig.h')
| -rw-r--r-- | arch/mips/include/asm/sn/klconfig.h | 526 |
1 files changed, 263 insertions, 263 deletions
diff --git a/arch/mips/include/asm/sn/klconfig.h b/arch/mips/include/asm/sn/klconfig.h index fe02900b930..467c313d576 100644 --- a/arch/mips/include/asm/sn/klconfig.h +++ b/arch/mips/include/asm/sn/klconfig.h @@ -8,8 +8,8 @@ * Copyright (C) 1992 - 1997, 1999, 2000 Silicon Graphics, Inc. * Copyright (C) 1999, 2000 by Ralf Baechle */ -#ifndef _ASM_SN_KLCONFIG_H -#define _ASM_SN_KLCONFIG_H +#ifndef _ASM_SN_KLCONFIG_H +#define _ASM_SN_KLCONFIG_H /* * The KLCONFIG structures store info about the various BOARDs found @@ -20,11 +20,11 @@ /* * WARNING: * Certain assembly language routines (notably xxxxx.s) in the IP27PROM - * will depend on the format of the data structures in this file. In - * most cases, rearranging the fields can seriously break things. - * Adding fields in the beginning or middle can also break things. - * Add fields if necessary, to the end of a struct in such a way - * that offsets of existing fields do not change. + * will depend on the format of the data structures in this file. In + * most cases, rearranging the fields can seriously break things. + * Adding fields in the beginning or middle can also break things. + * Add fields if necessary, to the end of a struct in such a way + * that offsets of existing fields do not change. */ #include <linux/types.h> @@ -35,7 +35,7 @@ #include <asm/sn/sn0/addrs.h> //#include <sys/SN/router.h> // XXX Stolen from <sys/SN/router.h>: -#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ +#define MAX_ROUTER_PORTS (6) /* Max. number of ports on a router */ #include <asm/sn/fru.h> //#include <sys/graph.h> //#include <sys/xtalk/xbow.h> @@ -63,14 +63,14 @@ typedef u64 nic_t; -#define KLCFGINFO_MAGIC 0xbeedbabe +#define KLCFGINFO_MAGIC 0xbeedbabe typedef s32 klconf_off_t; /* * Some IMPORTANT OFFSETS. These are the offsets on all NODES. */ -#define MAX_MODULE_ID 255 +#define MAX_MODULE_ID 255 #define SIZE_PAD 4096 /* 4k padding for structures */ /* * 1 NODE brd, 2 Router brd (1 8p, 1 meta), 6 Widgets, @@ -86,25 +86,25 @@ typedef s32 klconf_off_t; /* All bits in this field are currently used. Try the pad fields if you need more flag bits */ -#define ENABLE_BOARD 0x01 -#define FAILED_BOARD 0x02 -#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which +#define ENABLE_BOARD 0x01 +#define FAILED_BOARD 0x02 +#define DUPLICATE_BOARD 0x04 /* Boards like midplanes/routers which are discovered twice. Use one of them */ #define VISITED_BOARD 0x08 /* Used for compact hub numbering. */ -#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ +#define LOCAL_MASTER_IO6 0x10 /* master io6 for that node */ #define GLOBAL_MASTER_IO6 0x20 -#define THIRD_NIC_PRESENT 0x40 /* for future use */ -#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ +#define THIRD_NIC_PRESENT 0x40 /* for future use */ +#define SECOND_NIC_PRESENT 0x80 /* addons like MIO are present */ /* klinfo->flags fields */ -#define KLINFO_ENABLE 0x01 /* This component is enabled */ -#define KLINFO_FAILED 0x02 /* This component failed */ -#define KLINFO_DEVICE 0x04 /* This component is a device */ -#define KLINFO_VISITED 0x08 /* This component has been visited */ -#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ -#define KLINFO_INSTALL 0x20 /* Install a driver */ -#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ +#define KLINFO_ENABLE 0x01 /* This component is enabled */ +#define KLINFO_FAILED 0x02 /* This component failed */ +#define KLINFO_DEVICE 0x04 /* This component is a device */ +#define KLINFO_VISITED 0x08 /* This component has been visited */ +#define KLINFO_CONTROLLER 0x10 /* This component is a device controller */ +#define KLINFO_INSTALL 0x20 /* Install a driver */ +#define KLINFO_HEADLESS 0x40 /* Headless (or hubless) component */ #define IS_CONSOLE_IOC3(i) ((((klinfo_t *)i)->flags) & KLINFO_INSTALL) #define GB2 0x80000000 @@ -116,30 +116,30 @@ typedef s32 klconf_off_t; is used in the code to allocate various areas. */ -#define BOARD_STRUCT 0 -#define COMPONENT_STRUCT 1 -#define ERRINFO_STRUCT 2 -#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) -#define DEVICE_STRUCT 3 +#define BOARD_STRUCT 0 +#define COMPONENT_STRUCT 1 +#define ERRINFO_STRUCT 2 +#define KLMALLOC_TYPE_MAX (ERRINFO_STRUCT + 1) +#define DEVICE_STRUCT 3 typedef struct console_s { - unsigned long uart_base; - unsigned long config_base; - unsigned long memory_base; + unsigned long uart_base; + unsigned long config_base; + unsigned long memory_base; short baud; short flag; int type; nasid_t nasid; char wid; - char npci; + char npci; nic_t baseio_nic; } console_t; typedef struct klc_malloc_hdr { - klconf_off_t km_base; - klconf_off_t km_limit; - klconf_off_t km_current; + klconf_off_t km_base; + klconf_off_t km_limit; + klconf_off_t km_current; } klc_malloc_hdr_t; /* Functions/macros needed to use this structure */ @@ -148,7 +148,7 @@ typedef struct kl_config_hdr { u64 ch_magic; /* set this to KLCFGINFO_MAGIC */ u32 ch_version; /* structure version number */ klconf_off_t ch_malloc_hdr_off; /* offset of ch_malloc_hdr */ - klconf_off_t ch_cons_off; /* offset of ch_cons */ + klconf_off_t ch_cons_off; /* offset of ch_cons */ klconf_off_t ch_board_info; /* the link list of boards */ console_t ch_cons_info; /* address info of the console */ klc_malloc_hdr_t ch_malloc_hdr[KLMALLOC_TYPE_MAX]; @@ -157,27 +157,27 @@ typedef struct kl_config_hdr { } kl_config_hdr_t; -#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) +#define KL_CONFIG_HDR(_nasid) ((kl_config_hdr_t *)(KLCONFIG_ADDR(_nasid))) #define KL_CONFIG_INFO_OFFSET(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info) + (KL_CONFIG_HDR(_nasid)->ch_board_info) #define KL_CONFIG_INFO_SET_OFFSET(_nasid, _off) \ - (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) + (KL_CONFIG_HDR(_nasid)->ch_board_info = (_off)) -#define KL_CONFIG_INFO(_nasid) \ - (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ +#define KL_CONFIG_INFO(_nasid) \ + (lboard_t *)((KL_CONFIG_HDR(_nasid)->ch_board_info) ? \ NODE_OFFSET_TO_K1((_nasid), KL_CONFIG_HDR(_nasid)->ch_board_info) : \ 0) #define KL_CONFIG_MAGIC(_nasid) (KL_CONFIG_HDR(_nasid)->ch_magic) #define KL_CONFIG_CHECK_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic == KLCFGINFO_MAGIC) #define KL_CONFIG_HDR_INIT_MAGIC(_nasid) \ - (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) + (KL_CONFIG_HDR(_nasid)->ch_magic = KLCFGINFO_MAGIC) /* --- New Macros for the changed kl_config_hdr_t structure --- */ -#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ +#define PTR_CH_MALLOC_HDR(_k) ((klc_malloc_hdr_t *)\ ((unsigned long)_k + (_k->ch_malloc_hdr_off))) #define KL_CONFIG_CH_MALLOC_HDR(_n) PTR_CH_MALLOC_HDR(KL_CONFIG_HDR(_n)) @@ -190,29 +190,29 @@ typedef struct kl_config_hdr { /* ------------------------------------------------------------- */ #define KL_CONFIG_INFO_START(_nasid) \ - (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) + (klconf_off_t)(KLCONFIG_OFFSET(_nasid) + sizeof(kl_config_hdr_t)) #define KL_CONFIG_BOARD_NASID(_brd) ((_brd)->brd_nasid) #define KL_CONFIG_BOARD_SET_NEXT(_brd, _off) ((_brd)->brd_next = (_off)) -#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) +#define KL_CONFIG_DUPLICATE_BOARD(_brd) ((_brd)->brd_flags & DUPLICATE_BOARD) -#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) -#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) +#define XBOW_PORT_TYPE_HUB(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_HUB) +#define XBOW_PORT_TYPE_IO(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_IO) -#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) -#define XBOW_PORT_NASID(_xbowp, _link) \ - ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) +#define XBOW_PORT_IS_ENABLED(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_flag & XBOW_PORT_ENABLE) +#define XBOW_PORT_NASID(_xbowp, _link) \ + ((_xbowp)->xbow_port_info[(_link) - BASE_XBOW_PORT].port_nasid) -#define XBOW_PORT_IO 0x1 -#define XBOW_PORT_HUB 0x2 +#define XBOW_PORT_IO 0x1 +#define XBOW_PORT_HUB 0x2 #define XBOW_PORT_ENABLE 0x4 -#define SN0_PORT_FENCE_SHFT 0 -#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) +#define SN0_PORT_FENCE_SHFT 0 +#define SN0_PORT_FENCE_MASK (1 << SN0_PORT_FENCE_SHFT) /* * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD @@ -242,28 +242,28 @@ typedef struct kl_config_hdr { * KLCONFIG - +------------+ +------------+ +------------+ +------------+ - | lboard | +-->| lboard | +-->| rboard | +-->| lboard | - +------------+ | +------------+ | +------------+ | +------------+ - | board info | | | board info | | |errinfo,bptr| | | board info | - +------------+ | +------------+ | +------------+ | +------------+ - | offset |--+ | offset |--+ | offset |--+ |offset=NULL | - +------------+ +------------+ +------------+ +------------+ + +------------+ +------------+ +------------+ +------------+ + | lboard | +-->| lboard | +-->| rboard | +-->| lboard | + +------------+ | +------------+ | +------------+ | +------------+ + | board info | | | board info | | |errinfo,bptr| | | board info | + +------------+ | +------------+ | +------------+ | +------------+ + | offset |--+ | offset |--+ | offset |--+ |offset=NULL | + +------------+ +------------+ +------------+ +------------+ +------------+ | board info | - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 1 |------>| type, rev, diaginfo, size ... | (CPU) - +------------+ +--------------------------------+ + +------------+ +--------------------------------+ | compt 2 |--+ - +------------+ | +--------------------------------+ - | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) - +------------+ +--------------------------------+ + +------------+ | +--------------------------------+ + | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK) + +------------+ +--------------------------------+ | errinfo |--+ - +------------+ | +--------------------------------+ - +--->|r/l brd errinfo,compt err flags | - +--------------------------------+ + +------------+ | +--------------------------------+ + +--->|r/l brd errinfo,compt err flags | + +--------------------------------+ * * Each BOARD consists of COMPONENTs and the BOARD structure has @@ -311,7 +311,7 @@ typedef struct kl_config_hdr { */ #define KL_CPU_R4000 0x1 /* Standard R4000 */ #define KL_CPU_TFP 0x2 /* TFP processor */ -#define KL_CPU_R10000 0x3 /* R10000 (T5) */ +#define KL_CPU_R10000 0x3 /* R10000 (T5) */ #define KL_CPU_NONE (-1) /* no cpu present in slot */ /* @@ -320,13 +320,13 @@ typedef struct kl_config_hdr { #define KLCLASS_MASK 0xf0 #define KLCLASS_NONE 0x00 -#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ +#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */ #define KLCLASS_CPU KLCLASS_NODE -#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI +#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI and the non-graphics widget boards */ -#define KLCLASS_ROUTER 0x30 /* Router board */ -#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board - so that we can record error info */ +#define KLCLASS_ROUTER 0x30 /* Router board */ +#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board + so that we can record error info */ #define KLCLASS_GFX 0x50 /* graphics boards */ #define KLCLASS_PSEUDO_GFX 0x60 /* HDTV type cards that use a gfx @@ -336,7 +336,7 @@ typedef struct kl_config_hdr { #define KLCLASS_MAX 7 /* Bump this if a new CLASS is added */ #define KLTYPE_MAX 10 /* Bump this if a new CLASS is added */ -#define KLCLASS_UNKNOWN 0xf0 +#define KLCLASS_UNKNOWN 0xf0 #define KLCLASS(_x) ((_x) & KLCLASS_MASK) @@ -353,36 +353,36 @@ typedef struct kl_config_hdr { #define KLTYPE_WEIRDIO (KLCLASS_IO | 0x0) #define KLTYPE_BASEIO (KLCLASS_IO | 0x1) /* IOC3, SuperIO, Bridge, SCSI */ -#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ +#define KLTYPE_IO6 KLTYPE_BASEIO /* Additional name */ #define KLTYPE_4CHSCSI (KLCLASS_IO | 0x2) -#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ -#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) -#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ -#define KLTYPE_FDDI (KLCLASS_IO | 0x4) +#define KLTYPE_MSCSI KLTYPE_4CHSCSI /* Additional name */ +#define KLTYPE_ETHERNET (KLCLASS_IO | 0x3) +#define KLTYPE_MENET KLTYPE_ETHERNET /* Additional name */ +#define KLTYPE_FDDI (KLCLASS_IO | 0x4) #define KLTYPE_UNUSED (KLCLASS_IO | 0x5) /* XXX UNUSED */ -#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ +#define KLTYPE_HAROLD (KLCLASS_IO | 0x6) /* PCI SHOE BOX */ #define KLTYPE_PCI KLTYPE_HAROLD -#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ -#define KLTYPE_MIO (KLCLASS_IO | 0x8) -#define KLTYPE_FC (KLCLASS_IO | 0x9) -#define KLTYPE_LINC (KLCLASS_IO | 0xA) -#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ -#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ -#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ +#define KLTYPE_VME (KLCLASS_IO | 0x7) /* Any 3rd party VME card */ +#define KLTYPE_MIO (KLCLASS_IO | 0x8) +#define KLTYPE_FC (KLCLASS_IO | 0x9) +#define KLTYPE_LINC (KLCLASS_IO | 0xA) +#define KLTYPE_TPU (KLCLASS_IO | 0xB) /* Tensor Processing Unit */ +#define KLTYPE_GSN_A (KLCLASS_IO | 0xC) /* Main GSN board */ +#define KLTYPE_GSN_B (KLCLASS_IO | 0xD) /* Auxiliary GSN board */ #define KLTYPE_GFX (KLCLASS_GFX | 0x0) /* unknown graphics type */ #define KLTYPE_GFX_KONA (KLCLASS_GFX | 0x1) /* KONA graphics on IP27 */ #define KLTYPE_GFX_MGRA (KLCLASS_GFX | 0x3) /* MGRAS graphics on IP27 */ #define KLTYPE_WEIRDROUTER (KLCLASS_ROUTER | 0x0) -#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) -#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ +#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1) +#define KLTYPE_ROUTER2 KLTYPE_ROUTER /* Obsolete! */ #define KLTYPE_NULL_ROUTER (KLCLASS_ROUTER | 0x2) #define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3) #define KLTYPE_WEIRDMIDPLANE (KLCLASS_MIDPLANE | 0x0) #define KLTYPE_MIDPLANE8 (KLCLASS_MIDPLANE | 0x1) /* 8 slot backplane */ -#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 +#define KLTYPE_MIDPLANE KLTYPE_MIDPLANE8 #define KLTYPE_PBRICK_XBOW (KLCLASS_MIDPLANE | 0x2) #define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0) @@ -398,11 +398,11 @@ typedef struct kl_config_hdr { * When bringup started nic names had not standardized and so we * had to hard code. (For people interested in history.) */ -#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) +#define KLTYPE_XTHD (KLCLASS_PSEUDO_GFX | 0x9) #define KLTYPE_UNKNOWN (KLCLASS_UNKNOWN | 0xf) -#define KLTYPE(_x) ((_x) & KLTYPE_MASK) +#define KLTYPE(_x) ((_x) & KLTYPE_MASK) #define IS_MIO_PRESENT(l) ((l->brd_type == KLTYPE_BASEIO) && \ (l->brd_flags & SECOND_NIC_PRESENT)) #define IS_MIO_IOC3(l, n) (IS_MIO_PRESENT(l) && (n > 2)) @@ -416,33 +416,33 @@ typedef struct kl_config_hdr { #define LOCAL_BOARD 1 #define REMOTE_BOARD 2 -#define LBOARD_STRUCT_VERSION 2 +#define LBOARD_STRUCT_VERSION 2 typedef struct lboard_s { - klconf_off_t brd_next; /* Next BOARD */ - unsigned char struct_type; /* type of structure, local or remote */ - unsigned char brd_type; /* type+class */ - unsigned char brd_sversion; /* version of this structure */ - unsigned char brd_brevision; /* board revision */ - unsigned char brd_promver; /* board prom version, if any */ - unsigned char brd_flags; /* Enabled, Disabled etc */ - unsigned char brd_slot; /* slot number */ - unsigned short brd_debugsw; /* Debug switches */ - moduleid_t brd_module; /* module to which it belongs */ - partid_t brd_partition; /* Partition number */ - unsigned short brd_diagval; /* diagnostic value */ - unsigned short brd_diagparm; /* diagnostic parameter */ - unsigned char brd_inventory; /* inventory history */ - unsigned char brd_numcompts; /* Number of components */ - nic_t brd_nic; /* Number in CAN */ - nasid_t brd_nasid; /* passed parameter */ - klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ - klconf_off_t brd_errinfo; /* Board's error information */ + klconf_off_t brd_next; /* Next BOARD */ + unsigned char struct_type; /* type of structure, local or remote */ + unsigned char brd_type; /* type+class */ + unsigned char brd_sversion; /* version of this structure */ + unsigned char brd_brevision; /* board revision */ + unsigned char brd_promver; /* board prom version, if any */ + unsigned char brd_flags; /* Enabled, Disabled etc */ + unsigned char brd_slot; /* slot number */ + unsigned short brd_debugsw; /* Debug switches */ + moduleid_t brd_module; /* module to which it belongs */ + partid_t brd_partition; /* Partition number */ + unsigned short brd_diagval; /* diagnostic value */ + unsigned short brd_diagparm; /* diagnostic parameter */ + unsigned char brd_inventory; /* inventory history */ + unsigned char brd_numcompts; /* Number of components */ + nic_t brd_nic; /* Number in CAN */ + nasid_t brd_nasid; /* passed parameter */ + klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */ + klconf_off_t brd_errinfo; /* Board's error information */ struct lboard_s *brd_parent; /* Logical parent for this brd */ - vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ + vertex_hdl_t brd_graph_link; /* vertex hdl to connect extern compts */ confidence_t brd_confidence; /* confidence that the board is bad */ - nasid_t brd_owner; /* who owns this board */ - unsigned char brd_nic_flags; /* To handle 8 more NICs */ + nasid_t brd_owner; /* who owns this board */ + unsigned char brd_nic_flags; /* To handle 8 more NICs */ char brd_name[32]; } lboard_t; @@ -456,23 +456,23 @@ typedef struct lboard_s { #define KLCF_CLASS(_brd) KLCLASS((_brd)->brd_type) #define KLCF_TYPE(_brd) KLTYPE((_brd)->brd_type) -#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) +#define KLCF_REMOTE(_brd) (((_brd)->struct_type & LOCAL_BOARD) ? 0 : 1) #define KLCF_NUM_COMPS(_brd) ((_brd)->brd_numcompts) #define KLCF_MODULE_ID(_brd) ((_brd)->brd_module) -#define KLCF_NEXT(_brd) \ - ((_brd)->brd_next ? \ +#define KLCF_NEXT(_brd) \ + ((_brd)->brd_next ? \ (lboard_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), (_brd)->brd_next)):\ NULL) -#define KLCF_COMP(_brd, _ndx) \ - (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ +#define KLCF_COMP(_brd, _ndx) \ + (klinfo_t *)(NODE_OFFSET_TO_K1(NASID_GET(_brd), \ (_brd)->brd_compts[(_ndx)])) #define KLCF_COMP_ERROR(_brd, _comp) \ - (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) + (NODE_OFFSET_TO_K1(NASID_GET(_brd), (_comp)->errinfo)) #define KLCF_COMP_TYPE(_comp) ((_comp)->struct_type) -#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ +#define KLCF_BRIDGE_W_ID(_comp) ((_comp)->physid) /* Widget ID */ @@ -481,73 +481,73 @@ typedef struct lboard_s { * component. */ -typedef struct klinfo_s { /* Generic info */ - unsigned char struct_type; /* type of this structure */ - unsigned char struct_version; /* version of this structure */ - unsigned char flags; /* Enabled, disabled etc */ - unsigned char revision; /* component revision */ - unsigned short diagval; /* result of diagnostics */ - unsigned short diagparm; /* diagnostic parameter */ - unsigned char inventory; /* previous inventory status */ - nic_t nic; /* MUst be aligned properly */ - unsigned char physid; /* physical id of component */ - unsigned int virtid; /* virtual id as seen by system */ - unsigned char widid; /* Widget id - if applicable */ - nasid_t nasid; /* node number - from parent */ +typedef struct klinfo_s { /* Generic info */ + unsigned char struct_type; /* type of this structure */ + unsigned char struct_version; /* version of this structure */ + unsigned char flags; /* Enabled, disabled etc */ + unsigned char revision; /* component revision */ + unsigned short diagval; /* result of diagnostics */ + unsigned short diagparm; /* diagnostic parameter */ + unsigned char inventory; /* previous inventory status */ + nic_t nic; /* MUst be aligned properly */ + unsigned char physid; /* physical id of component */ + unsigned int virtid; /* virtual id as seen by system */ + unsigned char widid; /* Widget id - if applicable */ + nasid_t nasid; /* node number - from parent */ char pad1; /* pad out structure. */ char pad2; /* pad out structure. */ - COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ - klconf_off_t errinfo; /* component specific errors */ - unsigned short pad3; /* pci fields have moved over to */ - unsigned short pad4; /* klbri_t */ + COMPONENT *arcs_compt; /* ptr to the arcs struct for ease*/ + klconf_off_t errinfo; /* component specific errors */ + unsigned short pad3; /* pci fields have moved over to */ + unsigned short pad4; /* klbri_t */ } klinfo_t ; #define KLCONFIG_INFO_ENABLED(_i) ((_i)->flags & KLINFO_ENABLE) /* * Component structures. * Following are the currently identified components: - * CPU, HUB, MEM_BANK, - * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) - * BRIDGE, IOC3, SuperIO, SCSI, FDDI - * ROUTER - * GRAPHICS + * CPU, HUB, MEM_BANK, + * XBOW(consists of 16 WIDGETs, each of which can be HUB or GRAPHICS or BRIDGE) + * BRIDGE, IOC3, SuperIO, SCSI, FDDI + * ROUTER + * GRAPHICS */ #define KLSTRUCT_UNKNOWN 0 -#define KLSTRUCT_CPU 1 -#define KLSTRUCT_HUB 2 -#define KLSTRUCT_MEMBNK 3 -#define KLSTRUCT_XBOW 4 -#define KLSTRUCT_BRI 5 -#define KLSTRUCT_IOC3 6 -#define KLSTRUCT_PCI 7 -#define KLSTRUCT_VME 8 +#define KLSTRUCT_CPU 1 +#define KLSTRUCT_HUB 2 +#define KLSTRUCT_MEMBNK 3 +#define KLSTRUCT_XBOW 4 +#define KLSTRUCT_BRI 5 +#define KLSTRUCT_IOC3 6 +#define KLSTRUCT_PCI 7 +#define KLSTRUCT_VME 8 #define KLSTRUCT_ROU 9 -#define KLSTRUCT_GFX 10 -#define KLSTRUCT_SCSI 11 -#define KLSTRUCT_FDDI 12 -#define KLSTRUCT_MIO 13 -#define KLSTRUCT_DISK 14 -#define KLSTRUCT_TAPE 15 -#define KLSTRUCT_CDROM 16 -#define KLSTRUCT_HUB_UART 17 -#define KLSTRUCT_IOC3ENET 18 -#define KLSTRUCT_IOC3UART 19 +#define KLSTRUCT_GFX 10 +#define KLSTRUCT_SCSI 11 +#define KLSTRUCT_FDDI 12 +#define KLSTRUCT_MIO 13 +#define KLSTRUCT_DISK 14 +#define KLSTRUCT_TAPE 15 +#define KLSTRUCT_CDROM 16 +#define KLSTRUCT_HUB_UART 17 +#define KLSTRUCT_IOC3ENET 18 +#define KLSTRUCT_IOC3UART 19 #define KLSTRUCT_UNUSED 20 /* XXX UNUSED */ -#define KLSTRUCT_IOC3PCKM 21 -#define KLSTRUCT_RAD 22 -#define KLSTRUCT_HUB_TTY 23 -#define KLSTRUCT_IOC3_TTY 24 +#define KLSTRUCT_IOC3PCKM 21 +#define KLSTRUCT_RAD 22 +#define KLSTRUCT_HUB_TTY 23 +#define KLSTRUCT_IOC3_TTY 24 /* Early Access IO proms are compatible only with KLSTRUCT values up to 24. */ -#define KLSTRUCT_FIBERCHANNEL 25 +#define KLSTRUCT_FIBERCHANNEL 25 #define KLSTRUCT_MOD_SERIAL_NUM 26 -#define KLSTRUCT_IOC3MS 27 -#define KLSTRUCT_TPU 28 -#define KLSTRUCT_GSN_A 29 -#define KLSTRUCT_GSN_B 30 -#define KLSTRUCT_XTHD 31 +#define KLSTRUCT_IOC3MS 27 +#define KLSTRUCT_TPU 28 +#define KLSTRUCT_GSN_A 29 +#define KLSTRUCT_GSN_B 30 +#define KLSTRUCT_XTHD 31 /* * These are the indices of various components within a lboard structure. @@ -583,7 +583,7 @@ typedef u64 *router_t; * The port info in ip27_cfg area translates to a lboart_t in the * KLCONFIG area. But since KLCONFIG does not use pointers, lboart_t * is stored in terms of a nasid and a offset from start of KLCONFIG - * area on that nasid. + * area on that nasid. */ typedef struct klport_s { nasid_t port_nasid; @@ -591,20 +591,20 @@ typedef struct klport_s { klconf_off_t port_offset; } klport_t; -typedef struct klcpu_s { /* CPU */ - klinfo_t cpu_info; - unsigned short cpu_prid; /* Processor PRID value */ - unsigned short cpu_fpirr; /* FPU IRR value */ - unsigned short cpu_speed; /* Speed in MHZ */ - unsigned short cpu_scachesz; /* secondary cache size in MB */ - unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ +typedef struct klcpu_s { /* CPU */ + klinfo_t cpu_info; + unsigned short cpu_prid; /* Processor PRID value */ + unsigned short cpu_fpirr; /* FPU IRR value */ + unsigned short cpu_speed; /* Speed in MHZ */ + unsigned short cpu_scachesz; /* secondary cache size in MB */ + unsigned short cpu_scachespeed;/* secondary cache speed in MHz */ } klcpu_t ; #define CPU_STRUCT_VERSION 2 typedef struct klhub_s { /* HUB */ - klinfo_t hub_info; - unsigned int hub_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hub_info; + unsigned int hub_flags; /* PCFG_HUB_xxx flags */ klport_t hub_port; /* hub is connected to this */ nic_t hub_box_nic; /* nic of containing box */ klconf_off_t hub_mfg_nic; /* MFG NIC string */ @@ -612,36 +612,36 @@ typedef struct klhub_s { /* HUB */ } klhub_t ; typedef struct klhub_uart_s { /* HUB */ - klinfo_t hubuart_info; - unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ + klinfo_t hubuart_info; + unsigned int hubuart_flags; /* PCFG_HUB_xxx flags */ nic_t hubuart_box_nic; /* nic of containing box */ } klhub_uart_t ; -#define MEMORY_STRUCT_VERSION 2 +#define MEMORY_STRUCT_VERSION 2 typedef struct klmembnk_s { /* MEMORY BANK */ - klinfo_t membnk_info; - short membnk_memsz; /* Total memory in megabytes */ + klinfo_t membnk_info; + short membnk_memsz; /* Total memory in megabytes */ short membnk_dimm_select; /* bank to physical addr mapping*/ short membnk_bnksz[MD_MEM_BANKS]; /* Memory bank sizes */ short membnk_attr; } klmembnk_t ; #define KLCONFIG_MEMBNK_SIZE(_info, _bank) \ - ((_info)->membnk_bnksz[(_bank)]) + ((_info)->membnk_bnksz[(_bank)]) #define MEMBNK_PREMIUM 1 #define KLCONFIG_MEMBNK_PREMIUM(_info, _bank) \ - ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) + ((_info)->membnk_attr & (MEMBNK_PREMIUM << (_bank))) #define MAX_SERIAL_NUM_SIZE 10 typedef struct klmod_serial_num_s { - klinfo_t snum_info; + klinfo_t snum_info; union { - char snum_str[MAX_SERIAL_NUM_SIZE]; - unsigned long long snum_int; + char snum_str[MAX_SERIAL_NUM_SIZE]; + unsigned long long snum_int; } snum; } klmod_serial_num_t; @@ -650,43 +650,43 @@ typedef struct klmod_serial_num_s { serial number struct as a component without losing compatibility between prom versions. */ -#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ +#define GET_SNUM_COMP(_l) ((klmod_serial_num_t *)\ KLCF_COMP(_l, _l->brd_numcompts)) #define MAX_XBOW_LINKS 16 -typedef struct klxbow_s { /* XBOW */ - klinfo_t xbow_info ; +typedef struct klxbow_s { /* XBOW */ + klinfo_t xbow_info ; klport_t xbow_port_info[MAX_XBOW_LINKS] ; /* Module number */ - int xbow_master_hub_link; - /* type of brd connected+component struct ptr+flags */ + int xbow_master_hub_link; + /* type of brd connected+component struct ptr+flags */ } klxbow_t ; #define MAX_PCI_SLOTS 8 typedef struct klpci_device_s { s32 pci_device_id; /* 32 bits of vendor/device ID. */ - s32 pci_device_pad; /* 32 bits of padding. */ + s32 pci_device_pad; /* 32 bits of padding. */ } klpci_device_t; #define BRIDGE_STRUCT_VERSION 2 -typedef struct klbri_s { /* BRIDGE */ - klinfo_t bri_info ; - unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ - unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ - pci_t pci_specific ; /* PCI Board config info */ +typedef struct klbri_s { /* BRIDGE */ + klinfo_t bri_info ; + unsigned char bri_eprominfo ; /* IO6prom connected to bridge */ + unsigned char bri_bustype ; /* PCI/VME BUS bridge/GIO */ + pci_t pci_specific ; /* PCI Board config info */ klpci_device_t bri_devices[MAX_PCI_DEVS] ; /* PCI IDs */ klconf_off_t bri_mfg_nic ; } klbri_t ; #define MAX_IOC3_TTY 2 -typedef struct klioc3_s { /* IOC3 */ - klinfo_t ioc3_info ; - unsigned char ioc3_ssram ; /* Info about ssram */ - unsigned char ioc3_nvram ; /* Info about nvram */ - klinfo_t ioc3_superio ; /* Info about superio */ +typedef struct klioc3_s { /* IOC3 */ + klinfo_t ioc3_info ; + unsigned char ioc3_ssram ; /* Info about ssram */ + unsigned char ioc3_nvram ; /* Info about nvram */ + klinfo_t ioc3_superio ; /* Info about superio */ klconf_off_t ioc3_tty_off ; klinfo_t ioc3_enet ; klconf_off_t ioc3_enet_off ; @@ -695,27 +695,27 @@ typedef struct klioc3_s { /* IOC3 */ #define MAX_VME_SLOTS 8 -typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ - klinfo_t vmeb_info ; +typedef struct klvmeb_s { /* VME BRIDGE - PCI CTLR */ + klinfo_t vmeb_info ; vmeb_t vmeb_specific ; - klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmeb_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmeb_t ; -typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ +typedef struct klvmed_s { /* VME DEVICE - VME BOARD */ klinfo_t vmed_info ; vmed_t vmed_specific ; - klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ + klconf_off_t vmed_brdinfo[MAX_VME_SLOTS] ; /* VME Board config info */ } klvmed_t ; #define ROUTER_VECTOR_VERS 2 /* XXX - Don't we need the number of ports here?!? */ -typedef struct klrou_s { /* ROUTER */ - klinfo_t rou_info ; - unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ - nic_t rou_box_nic ; /* nic of the containing module */ - klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ - klconf_off_t rou_mfg_nic ; /* MFG NIC string */ +typedef struct klrou_s { /* ROUTER */ + klinfo_t rou_info ; + unsigned int rou_flags ; /* PCFG_ROUTER_xxx flags */ + nic_t rou_box_nic ; /* nic of the containing module */ + klport_t rou_port[MAX_ROUTER_PORTS + 1] ; /* array index 1 to 6 */ + klconf_off_t rou_mfg_nic ; /* MFG NIC string */ u64 rou_vector; /* vector from master node */ } klrou_t ; @@ -732,30 +732,30 @@ typedef struct klrou_s { /* ROUTER */ #define KLGFX_COOKIE 0x0c0de000 typedef struct klgfx_s { /* GRAPHICS Device */ - klinfo_t gfx_info; - klconf_off_t old_gndevs; /* for compatibility with older proms */ - klconf_off_t old_gdoff0; /* for compatibility with older proms */ + klinfo_t gfx_info; + klconf_off_t old_gndevs; /* for compatibility with older proms */ + klconf_off_t old_gdoff0; /* for compatibility with older proms */ unsigned int cookie; /* for compatibility with older proms */ unsigned int moduleslot; struct klgfx_s *gfx_next_pipe; graphics_t gfx_specific; - klconf_off_t pad0; /* for compatibility with older proms */ - klconf_off_t gfx_mfg_nic; + klconf_off_t pad0; /* for compatibility with older proms */ + klconf_off_t gfx_mfg_nic; } klgfx_t; typedef struct klxthd_s { - klinfo_t xthd_info ; - klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ + klinfo_t xthd_info ; + klconf_off_t xthd_mfg_nic ; /* MFG NIC string */ } klxthd_t ; -typedef struct kltpu_s { /* TPU board */ - klinfo_t tpu_info ; - klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ +typedef struct kltpu_s { /* TPU board */ + klinfo_t tpu_info ; + klconf_off_t tpu_mfg_nic ; /* MFG NIC string */ } kltpu_t ; -typedef struct klgsn_s { /* GSN board */ - klinfo_t gsn_info ; - klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ +typedef struct klgsn_s { /* GSN board */ + klinfo_t gsn_info ; + klconf_off_t gsn_mfg_nic ; /* MFG NIC string */ } klgsn_t ; #define MAX_SCSI_DEVS 16 @@ -767,57 +767,57 @@ typedef struct klgsn_s { /* GSN board */ * that as the size to be klmalloced. */ -typedef struct klscsi_s { /* SCSI Controller */ - klinfo_t scsi_info ; - scsi_t scsi_specific ; - unsigned char scsi_numdevs ; +typedef struct klscsi_s { /* SCSI Controller */ + klinfo_t scsi_info ; + scsi_t scsi_specific ; + unsigned char scsi_numdevs ; klconf_off_t scsi_devinfo[MAX_SCSI_DEVS] ; } klscsi_t ; -typedef struct klscdev_s { /* SCSI device */ - klinfo_t scdev_info ; +typedef struct klscdev_s { /* SCSI device */ + klinfo_t scdev_info ; struct scsidisk_data *scdev_cfg ; /* driver fills up this */ } klscdev_t ; -typedef struct klttydev_s { /* TTY device */ - klinfo_t ttydev_info ; +typedef struct klttydev_s { /* TTY device */ + klinfo_t ttydev_info ; struct terminal_data *ttydev_cfg ; /* driver fills up this */ } klttydev_t ; -typedef struct klenetdev_s { /* ENET device */ - klinfo_t enetdev_info ; +typedef struct klenetdev_s { /* ENET device */ + klinfo_t enetdev_info ; struct net_data *enetdev_cfg ; /* driver fills up this */ } klenetdev_t ; -typedef struct klkbddev_s { /* KBD device */ - klinfo_t kbddev_info ; +typedef struct klkbddev_s { /* KBD device */ + klinfo_t kbddev_info ; struct keyboard_data *kbddev_cfg ; /* driver fills up this */ } klkbddev_t ; -typedef struct klmsdev_s { /* mouse device */ - klinfo_t msdev_info ; - void *msdev_cfg ; +typedef struct klmsdev_s { /* mouse device */ + klinfo_t msdev_info ; + void *msdev_cfg ; } klmsdev_t ; #define MAX_FDDI_DEVS 10 /* XXX Is this true */ -typedef struct klfddi_s { /* FDDI */ - klinfo_t fddi_info ; - fddi_t fddi_specific ; +typedef struct klfddi_s { /* FDDI */ + klinfo_t fddi_info ; + fddi_t fddi_specific ; klconf_off_t fddi_devinfo[MAX_FDDI_DEVS] ; } klfddi_t ; -typedef struct klmio_s { /* MIO */ - klinfo_t mio_info ; - mio_t mio_specific ; +typedef struct klmio_s { /* MIO */ + klinfo_t mio_info ; + mio_t mio_specific ; } klmio_t ; typedef union klcomp_s { klcpu_t kc_cpu; klhub_t kc_hub; - klmembnk_t kc_mem; - klxbow_t kc_xbow; + klmembnk_t kc_mem; + klxbow_t kc_xbow; klbri_t kc_bri; klioc3_t kc_ioc3; klvmeb_t kc_vmeb; @@ -831,11 +831,11 @@ typedef union klcomp_s { klmod_serial_num_t kc_snum ; } klcomp_t; -typedef union kldev_s { /* for device structure allocation */ +typedef union kldev_s { /* for device structure allocation */ klscdev_t kc_scsi_dev ; klttydev_t kc_tty_dev ; klenetdev_t kc_enet_dev ; - klkbddev_t kc_kbd_dev ; + klkbddev_t kc_kbd_dev ; } kldev_t ; /* Data structure interface routines. TBD */ |