diff options
Diffstat (limited to 'arch/powerpc/kernel/prom_parse.c')
| -rw-r--r-- | arch/powerpc/kernel/prom_parse.c | 290 |
1 files changed, 150 insertions, 140 deletions
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 603dff3ad62..0dfbe1cd28e 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -25,6 +25,12 @@ #define OF_CHECK_COUNTS(na, ns) ((na) > 0 && (na) <= OF_MAX_ADDR_CELLS && \ (ns) > 0) +static struct of_bus *of_match_bus(struct device_node *np); +static int __of_address_to_resource(struct device_node *dev, + const u32 *addrp, u64 size, unsigned int flags, + struct resource *r); + + /* Debug utility */ #ifdef DEBUG static void of_dump_addr(const char *s, const u32 *addr, int na) @@ -101,6 +107,7 @@ static unsigned int of_bus_default_get_flags(const u32 *addr) } +#ifdef CONFIG_PCI /* * PCI bus specific translator */ @@ -153,15 +160,156 @@ static unsigned int of_bus_pci_get_flags(const u32 *addr) switch((w >> 24) & 0x03) { case 0x01: flags |= IORESOURCE_IO; + break; case 0x02: /* 32 bits */ case 0x03: /* 64 bits */ flags |= IORESOURCE_MEM; + break; } if (w & 0x40000000) flags |= IORESOURCE_PREFETCH; return flags; } +const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, + unsigned int *flags) +{ + const u32 *prop; + unsigned int psize; + struct device_node *parent; + struct of_bus *bus; + int onesize, i, na, ns; + + /* Get parent & match bus type */ + parent = of_get_parent(dev); + if (parent == NULL) + return NULL; + bus = of_match_bus(parent); + if (strcmp(bus->name, "pci")) { + of_node_put(parent); + return NULL; + } + bus->count_cells(dev, &na, &ns); + of_node_put(parent); + if (!OF_CHECK_COUNTS(na, ns)) + return NULL; + + /* Get "reg" or "assigned-addresses" property */ + prop = get_property(dev, bus->addresses, &psize); + if (prop == NULL) + return NULL; + psize /= 4; + + onesize = na + ns; + for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) + if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { + if (size) + *size = of_read_number(prop + na, ns); + if (flags) + *flags = bus->get_flags(prop); + return prop; + } + return NULL; +} +EXPORT_SYMBOL(of_get_pci_address); + +int of_pci_address_to_resource(struct device_node *dev, int bar, + struct resource *r) +{ + const u32 *addrp; + u64 size; + unsigned int flags; + + addrp = of_get_pci_address(dev, bar, &size, &flags); + if (addrp == NULL) + return -EINVAL; + return __of_address_to_resource(dev, addrp, size, flags, r); +} +EXPORT_SYMBOL_GPL(of_pci_address_to_resource); + +static u8 of_irq_pci_swizzle(u8 slot, u8 pin) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + u32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard OF + * parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) + return of_irq_map_one(dn, 0, out_irq); + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { +#ifdef CONFIG_PPC64 + ppnode = pci_bus_to_OF_node(pdev->bus); +#else + struct pci_controller *host; + host = pci_bus_to_host(pdev->bus); + ppnode = host ? host->arch_data : NULL; +#endif + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't include + * the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); + pdev = ppdev; + } + + laddr[0] = (pdev->bus->number << 16) + | (pdev->devfn << 8); + laddr[1] = laddr[2] = 0; + return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); +#endif /* CONFIG_PCI */ + /* * ISA bus specific translator */ @@ -223,6 +371,7 @@ static unsigned int of_bus_isa_get_flags(const u32 *addr) */ static struct of_bus of_busses[] = { +#ifdef CONFIG_PCI /* PCI */ { .name = "pci", @@ -233,6 +382,7 @@ static struct of_bus of_busses[] = { .translate = of_bus_pci_translate, .get_flags = of_bus_pci_get_flags, }, +#endif /* CONFIG_PCI */ /* ISA */ { .name = "isa", @@ -445,48 +595,6 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size, } EXPORT_SYMBOL(of_get_address); -const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, - unsigned int *flags) -{ - const u32 *prop; - unsigned int psize; - struct device_node *parent; - struct of_bus *bus; - int onesize, i, na, ns; - - /* Get parent & match bus type */ - parent = of_get_parent(dev); - if (parent == NULL) - return NULL; - bus = of_match_bus(parent); - if (strcmp(bus->name, "pci")) { - of_node_put(parent); - return NULL; - } - bus->count_cells(dev, &na, &ns); - of_node_put(parent); - if (!OF_CHECK_COUNTS(na, ns)) - return NULL; - - /* Get "reg" or "assigned-addresses" property */ - prop = get_property(dev, bus->addresses, &psize); - if (prop == NULL) - return NULL; - psize /= 4; - - onesize = na + ns; - for (i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++) - if ((prop[0] & 0xff) == ((bar_no * 4) + PCI_BASE_ADDRESS_0)) { - if (size) - *size = of_read_number(prop + na, ns); - if (flags) - *flags = bus->get_flags(prop); - return prop; - } - return NULL; -} -EXPORT_SYMBOL(of_get_pci_address); - static int __of_address_to_resource(struct device_node *dev, const u32 *addrp, u64 size, unsigned int flags, struct resource *r) @@ -529,20 +637,6 @@ int of_address_to_resource(struct device_node *dev, int index, } EXPORT_SYMBOL_GPL(of_address_to_resource); -int of_pci_address_to_resource(struct device_node *dev, int bar, - struct resource *r) -{ - const u32 *addrp; - u64 size; - unsigned int flags; - - addrp = of_get_pci_address(dev, bar, &size, &flags); - if (addrp == NULL) - return -EINVAL; - return __of_address_to_resource(dev, addrp, size, flags, r); -} -EXPORT_SYMBOL_GPL(of_pci_address_to_resource); - void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, unsigned long *busno, unsigned long *phys, unsigned long *size) { @@ -898,87 +992,3 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return res; } EXPORT_SYMBOL_GPL(of_irq_map_one); - -#ifdef CONFIG_PCI -static u8 of_irq_pci_swizzle(u8 slot, u8 pin) -{ - return (((pin - 1) + slot) % 4) + 1; -} - -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) -{ - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - u32 laddr[3]; - u8 pin; - int rc; - - /* Check if we have a device node, if yes, fallback to standard OF - * parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) - return of_irq_map_one(dn, 0, out_irq); - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { -#ifdef CONFIG_PPC64 - ppnode = pci_bus_to_OF_node(pdev->bus); -#else - struct pci_controller *host; - host = pci_bus_to_host(pdev->bus); - ppnode = host ? host->arch_data : NULL; -#endif - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't include - * the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; - - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again - */ - lspec = of_irq_pci_swizzle(PCI_SLOT(pdev->devfn), lspec); - pdev = ppdev; - } - - laddr[0] = (pdev->bus->number << 16) - | (pdev->devfn << 8); - laddr[1] = laddr[2] = 0; - return of_irq_map_raw(ppnode, &lspec, 1, laddr, out_irq); -} -EXPORT_SYMBOL_GPL(of_irq_map_pci); -#endif /* CONFIG_PCI */ |