diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx/mpc85xx_mds.c')
| -rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_mds.c | 102 |
1 files changed, 99 insertions, 3 deletions
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index f0684c8ac96..8fe87fc6148 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2007. All rights reserved. + * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> * @@ -154,6 +154,10 @@ static int mpc8568_mds_phy_fixups(struct phy_device *phydev) * Setup the architecture * */ +#ifdef CONFIG_SMP +extern void __init mpc85xx_smp_init(void); +#endif + static void __init mpc85xx_mds_setup_arch(void) { struct device_node *np; @@ -194,6 +198,10 @@ static void __init mpc85xx_mds_setup_arch(void) } #endif +#ifdef CONFIG_SMP + mpc85xx_smp_init(); +#endif + #ifdef CONFIG_QUICC_ENGINE np = of_find_compatible_node(NULL, NULL, "fsl,qe"); if (!np) { @@ -271,9 +279,49 @@ static void __init mpc85xx_mds_setup_arch(void) BCSR_UCC_RGMII, BCSR_UCC_RTBI); } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); } + iounmap(bcsr_regs); } + + if (machine_is(p1021_mds)) { +#define MPC85xx_PMUXCR_OFFSET 0x60 +#define MPC85xx_PMUXCR_QE0 0x00008000 +#define MPC85xx_PMUXCR_QE3 0x00001000 +#define MPC85xx_PMUXCR_QE9 0x00000040 +#define MPC85xx_PMUXCR_QE12 0x00000008 + static __be32 __iomem *pmuxcr; + + np = of_find_node_by_name(NULL, "global-utilities"); + + if (np) { + pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET; + + if (!pmuxcr) + printk(KERN_EMERG "Error: Alternate function" + " signal multiplex control register not" + " mapped!\n"); + else + /* P1021 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management singals in PMUXCR + * register. + */ + setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 | + MPC85xx_PMUXCR_QE3 | + MPC85xx_PMUXCR_QE9 | + MPC85xx_PMUXCR_QE12); + + of_node_put(np); + } + + } #endif /* CONFIG_QUICC_ENGINE */ #ifdef CONFIG_SWIOTLB @@ -330,6 +378,16 @@ static struct of_device_id mpc85xx_ids[] = { {}, }; +static struct of_device_id p1021_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .compatible = "simple-bus", }, + { .type = "qe", }, + { .compatible = "fsl,qe", }, + { .compatible = "gianfar", }, + {}, +}; + static int __init mpc85xx_publish_devices(void) { if (machine_is(mpc8568_mds)) @@ -342,11 +400,22 @@ static int __init mpc85xx_publish_devices(void) return 0; } + +static int __init p1021_publish_devices(void) +{ + /* Publish the QE devices */ + of_platform_bus_probe(NULL, p1021_ids, NULL); + + return 0; +} + machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices); machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_device_initcall(p1021_mds, p1021_publish_devices); machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier); machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier); +machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { @@ -366,7 +435,7 @@ static void __init mpc85xx_mds_pic_init(void) mpic = mpic_alloc(np, r.start, MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS, + MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); of_node_put(np); @@ -380,7 +449,11 @@ static void __init mpc85xx_mds_pic_init(void) if (!np) return; } - qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); + if (machine_is(p1021_mds)) + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + else + qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL); of_node_put(np); #endif /* CONFIG_QUICC_ENGINE */ } @@ -426,3 +499,26 @@ define_machine(mpc8569_mds) { .pcibios_fixup_bus = fsl_pcibios_fixup_bus, #endif }; + +static int __init p1021_mds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1021MDS"); + +} + +define_machine(p1021_mds) { + .name = "P1021 MDS", + .probe = p1021_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; + |