diff options
Diffstat (limited to 'arch/powerpc/platforms/86xx/mpc8610_hpcd.c')
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 87 |
1 files changed, 0 insertions, 87 deletions
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index 30725302884..5eedb710896 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -58,93 +58,6 @@ static int __init mpc8610_declare_of_platform_devices(void) } machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); -#ifdef CONFIG_PCI -static void __devinit quirk_uli1575(struct pci_dev *dev) -{ - u32 temp32; - - /* Disable INTx */ - pci_read_config_dword(dev, 0x48, &temp32); - pci_write_config_dword(dev, 0x48, (temp32 | 1<<26)); - - /* Enable sideband interrupt */ - pci_read_config_dword(dev, 0x90, &temp32); - pci_write_config_dword(dev, 0x90, (temp32 | 1<<22)); -} - -static void __devinit quirk_uli5288(struct pci_dev *dev) -{ - unsigned char c; - unsigned short temp; - - /* Interrupt Disable, Needed when SATA disabled */ - pci_read_config_word(dev, PCI_COMMAND, &temp); - temp |= 1<<10; - pci_write_config_word(dev, PCI_COMMAND, temp); - - pci_read_config_byte(dev, 0x83, &c); - c |= 0x80; - pci_write_config_byte(dev, 0x83, c); - - pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01); - pci_write_config_byte(dev, PCI_CLASS_DEVICE, 0x06); - - pci_read_config_byte(dev, 0x83, &c); - c &= 0x7f; - pci_write_config_byte(dev, 0x83, c); -} - -/* - * Since 8259PIC was disabled on the board, the IDE device can not - * use the legacy IRQ, we need to let the IDE device work under - * native mode and use the interrupt line like other PCI devices. - * IRQ14 is a sideband interrupt from IDE device to CPU and we use this - * as the interrupt for IDE device. - */ -static void __devinit quirk_uli5229(struct pci_dev *dev) -{ - unsigned char c; - - pci_read_config_byte(dev, 0x4b, &c); - c |= 0x10; - pci_write_config_byte(dev, 0x4b, c); -} - -/* - * SATA interrupt pin bug fix - * There's a chip bug for 5288, The interrupt pin should be 2, - * not the read only value 1, So it use INTB#, not INTA# which - * actually used by the IDE device 5229. - * As of this bug, during the PCI initialization, 5288 read the - * irq of IDE device from the device tree, this function fix this - * bug by re-assigning a correct irq to 5288. - * - */ -static void __devinit final_uli5288(struct pci_dev *dev) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - struct device_node *hosenode = hose ? hose->dn : NULL; - struct of_irq oirq; - int virq, pin = 2; - u32 laddr[3]; - - if (!hosenode) - return; - - laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(31, 0) << 8); - laddr[1] = laddr[2] = 0; - of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq); - virq = irq_create_of_mapping(oirq.controller, oirq.specifier, - oirq.size); - dev->irq = virq; -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5288, final_uli5288); -#endif /* CONFIG_PCI */ - #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) static u32 get_busfreq(void) |