summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/4xx/ibmstb4.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/4xx/ibmstb4.h')
-rw-r--r--arch/ppc/platforms/4xx/ibmstb4.h235
1 files changed, 0 insertions, 235 deletions
diff --git a/arch/ppc/platforms/4xx/ibmstb4.h b/arch/ppc/platforms/4xx/ibmstb4.h
deleted file mode 100644
index 31a08abaa4a..00000000000
--- a/arch/ppc/platforms/4xx/ibmstb4.h
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * Author: Armin Kuster <akuster@mvista.com>
- *
- * 2001 (c) MontaVista, Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_IBMSTB4_H__
-#define __ASM_IBMSTB4_H__
-
-
-/* serial port defines */
-#define STB04xxx_IO_BASE ((uint)0xe0000000)
-#define PPC4xx_PCI_IO_ADDR STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_PADDR STB04xxx_IO_BASE
-#define PPC4xx_ONB_IO_VADDR ((uint)0xe0000000)
-#define PPC4xx_ONB_IO_SIZE ((uint)14*64*1024)
-
-/*
- * map STB04xxx internal i/o address (0x400x00xx) to an address
- * which is below the 2GB limit...
- *
- * 4000 000x uart1 -> 0xe000 000x
- * 4001 00xx ppu
- * 4002 00xx smart card
- * 4003 000x iic
- * 4004 000x uart0
- * 4005 0xxx timer
- * 4006 00xx gpio
- * 4007 00xx smart card
- * 400b 000x iic
- * 400c 000x scp
- * 400d 000x modem
- * 400e 000x uart2
-*/
-#define STB04xxx_MAP_IO_ADDR(a) (((uint)(a)) + (STB04xxx_IO_BASE - 0x40000000))
-
-#define RS_TABLE_SIZE 3
-#define UART0_INT 20
-
-#ifdef __BOOTER__
-#define UART0_IO_BASE 0x40040000
-#else
-#define UART0_IO_BASE 0xe0040000
-#endif
-
-#define UART1_INT 21
-
-#ifdef __BOOTER__
-#define UART1_IO_BASE 0x40000000
-#else
-#define UART1_IO_BASE 0xe0000000
-#endif
-
-#define UART2_INT 31
-#ifdef __BOOTER__
-#define UART2_IO_BASE 0x400e0000
-#else
-#define UART2_IO_BASE 0xe00e0000
-#endif
-
-#define IDE0_BASE 0x400F0000
-#define IDE0_SIZE 0x200
-#define IDE0_IRQ 25
-#define IIC0_BASE 0x40030000
-#define IIC1_BASE 0x400b0000
-#define OPB0_BASE 0x40000000
-#define GPIO0_BASE 0x40060000
-
-#define USB0_BASE 0x40010000
-#define USB0_SIZE 0xA0
-#define USB0_IRQ 18
-
-#define IIC_NUMS 2
-#define UART_NUMS 3
-#define IIC0_IRQ 9
-#define IIC1_IRQ 10
-#define IIC_OWN 0x55
-#define IIC_CLOCK 50
-
-#define BD_EMAC_ADDR(e,i) bi_enetaddr[i]
-
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, UART##num##_INT, \
- (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST), \
- iomem_base: (u8 *)UART##num##_IO_BASE, \
- io_type: SERIAL_IO_MEM},
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_DEBUG_IO_BASE UART0_IO_BASE
-#define SERIAL_PORT_DFNS \
- STD_UART_OP(0) \
- STD_UART_OP(1) \
- STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
-#define SERIAL_PORT_DFNS \
- STD_UART_OP(1) \
- STD_UART_OP(0) \
- STD_UART_OP(2)
-#endif
-
-#if defined(CONFIG_UART0_TTYS2)
-#define SERIAL_DEBUG_IO_BASE UART2_IO_BASE
-#define SERIAL_PORT_DFNS \
- STD_UART_OP(2) \
- STD_UART_OP(0) \
- STD_UART_OP(1)
-#endif
-
-#define DCRN_BE_BASE 0x090
-#define DCRN_DMA0_BASE 0x0C0
-#define DCRN_DMA1_BASE 0x0C8
-#define DCRN_DMA2_BASE 0x0D0
-#define DCRN_DMA3_BASE 0x0D8
-#define DCRNCAP_DMA_CC 1 /* have DMA chained count capability */
-#define DCRN_DMASR_BASE 0x0E0
-#define DCRN_PLB0_BASE 0x054
-#define DCRN_PLB1_BASE 0x064
-#define DCRN_POB0_BASE 0x0B0
-#define DCRN_SCCR_BASE 0x120
-#define DCRN_UIC0_BASE 0x040
-#define DCRN_BE_BASE 0x090
-#define DCRN_DMA0_BASE 0x0C0
-#define DCRN_DMA1_BASE 0x0C8
-#define DCRN_DMA2_BASE 0x0D0
-#define DCRN_DMA3_BASE 0x0D8
-#define DCRN_CIC_BASE 0x030
-#define DCRN_DMASR_BASE 0x0E0
-#define DCRN_EBIMC_BASE 0x070
-#define DCRN_DCRX_BASE 0x020
-#define DCRN_CPMFR_BASE 0x102
-#define DCRN_SCCR_BASE 0x120
-#define UIC0 DCRN_UIC0_BASE
-
-#define IBM_CPM_IIC0 0x80000000 /* IIC 0 interface */
-#define IBM_CPM_USB0 0x40000000 /* IEEE-1284 */
-#define IBM_CPM_IIC1 0x20000000 /* IIC 1 interface */
-#define IBM_CPM_CPU 0x10000000 /* PPC405B3 clock control */
-#define IBM_CPM_AUD 0x08000000 /* Audio Decoder */
-#define IBM_CPM_EBIU 0x04000000 /* External Bus Interface Unit */
-#define IBM_CPM_SDRAM1 0x02000000 /* SDRAM 1 memory controller */
-#define IBM_CPM_DMA 0x01000000 /* DMA controller */
-#define IBM_CPM_DMA1 0x00800000 /* reserved */
-#define IBM_CPM_XPT1 0x00400000 /* reserved */
-#define IBM_CPM_XPT2 0x00200000 /* reserved */
-#define IBM_CPM_UART1 0x00100000 /* Serial 1 / Infrared */
-#define IBM_CPM_UART0 0x00080000 /* Serial 0 / 16550 */
-#define IBM_CPM_EPI 0x00040000 /* DCR Extension */
-#define IBM_CPM_SC0 0x00020000 /* Smart Card 0 */
-#define IBM_CPM_VID 0x00010000 /* reserved */
-#define IBM_CPM_SC1 0x00008000 /* Smart Card 1 */
-#define IBM_CPM_USBSDRA 0x00004000 /* SDRAM 0 memory controller */
-#define IBM_CPM_XPT0 0x00002000 /* Transport - 54 Mhz */
-#define IBM_CPM_CBS 0x00001000 /* Cross Bar Switch */
-#define IBM_CPM_GPT 0x00000800 /* GPTPWM */
-#define IBM_CPM_GPIO0 0x00000400 /* General Purpose IO 0 */
-#define IBM_CPM_DENC 0x00000200 /* Digital video Encoder */
-#define IBM_CPM_TMRCLK 0x00000100 /* CPU timers */
-#define IBM_CPM_XPT27 0x00000080 /* Transport - 27 Mhz */
-#define IBM_CPM_UIC 0x00000040 /* Universal Interrupt Controller */
-#define IBM_CPM_SSP 0x00000010 /* Modem Serial Interface (SSP) */
-#define IBM_CPM_UART2 0x00000008 /* Serial Control Port */
-#define IBM_CPM_DDIO 0x00000004 /* Descrambler */
-#define IBM_CPM_VID2 0x00000002 /* Video Decoder clock domain 2 */
-
-#define DFLT_IBM4xx_PM ~(IBM_CPM_CPU | IBM_CPM_EBIU | IBM_CPM_SDRAM1 \
- | IBM_CPM_DMA | IBM_CPM_DMA1 | IBM_CPM_CBS \
- | IBM_CPM_USBSDRA | IBM_CPM_XPT0 | IBM_CPM_TMRCLK \
- | IBM_CPM_XPT27 | IBM_CPM_UIC )
-
-#define DCRN_BEAR (DCRN_BE_BASE + 0x0) /* Bus Error Address Register */
-#define DCRN_BESR (DCRN_BE_BASE + 0x1) /* Bus Error Syndrome Register */
-/* DCRN_BESR */
-#define BESR_DSES 0x80000000 /* Data-Side Error Status */
-#define BESR_DMES 0x40000000 /* DMA Error Status */
-#define BESR_RWS 0x20000000 /* Read/Write Status */
-#define BESR_ETMASK 0x1C000000 /* Error Type */
-#define ET_PROT 0
-#define ET_PARITY 1
-#define ET_NCFG 2
-#define ET_BUSERR 4
-#define ET_BUSTO 6
-
-#define CHR1_CETE 0x00800000 /* CPU external timer enable */
-#define CHR1_PCIPW 0x00008000 /* PCI Int enable/Peripheral Write enable */
-
-#define DCRN_CICCR (DCRN_CIC_BASE + 0x0) /* CIC Control Register */
-#define DCRN_DMAS1 (DCRN_CIC_BASE + 0x1) /* DMA Select1 Register */
-#define DCRN_DMAS2 (DCRN_CIC_BASE + 0x2) /* DMA Select2 Register */
-#define DCRN_CICVCR (DCRN_CIC_BASE + 0x3) /* CIC Video COntro Register */
-#define DCRN_CICSEL3 (DCRN_CIC_BASE + 0x5) /* CIC Select 3 Register */
-#define DCRN_SGPO (DCRN_CIC_BASE + 0x6) /* CIC GPIO Output Register */
-#define DCRN_SGPOD (DCRN_CIC_BASE + 0x7) /* CIC GPIO OD Register */
-#define DCRN_SGPTC (DCRN_CIC_BASE + 0x8) /* CIC GPIO Tristate Ctrl Reg */
-#define DCRN_SGPI (DCRN_CIC_BASE + 0x9) /* CIC GPIO Input Reg */
-
-#define DCRN_DCRXICR (DCRN_DCRX_BASE + 0x0) /* Internal Control Register */
-#define DCRN_DCRXISR (DCRN_DCRX_BASE + 0x1) /* Internal Status Register */
-#define DCRN_DCRXECR (DCRN_DCRX_BASE + 0x2) /* External Control Register */
-#define DCRN_DCRXESR (DCRN_DCRX_BASE + 0x3) /* External Status Register */
-#define DCRN_DCRXTAR (DCRN_DCRX_BASE + 0x4) /* Target Address Register */
-#define DCRN_DCRXTDR (DCRN_DCRX_BASE + 0x5) /* Target Data Register */
-#define DCRN_DCRXIGR (DCRN_DCRX_BASE + 0x6) /* Interrupt Generation Register */
-#define DCRN_DCRXBCR (DCRN_DCRX_BASE + 0x7) /* Line Buffer Control Register */
-
-#define DCRN_BRCRH0 (DCRN_EBIMC_BASE + 0x0) /* Bus Region Config High 0 */
-#define DCRN_BRCRH1 (DCRN_EBIMC_BASE + 0x1) /* Bus Region Config High 1 */
-#define DCRN_BRCRH2 (DCRN_EBIMC_BASE + 0x2) /* Bus Region Config High 2 */
-#define DCRN_BRCRH3 (DCRN_EBIMC_BASE + 0x3) /* Bus Region Config High 3 */
-#define DCRN_BRCRH4 (DCRN_EBIMC_BASE + 0x4) /* Bus Region Config High 4 */
-#define DCRN_BRCRH5 (DCRN_EBIMC_BASE + 0x5) /* Bus Region Config High 5 */
-#define DCRN_BRCRH6 (DCRN_EBIMC_BASE + 0x6) /* Bus Region Config High 6 */
-#define DCRN_BRCRH7 (DCRN_EBIMC_BASE + 0x7) /* Bus Region Config High 7 */
-#define DCRN_BRCR0 (DCRN_EBIMC_BASE + 0x10) /* BRC 0 */
-#define DCRN_BRCR1 (DCRN_EBIMC_BASE + 0x11) /* BRC 1 */
-#define DCRN_BRCR2 (DCRN_EBIMC_BASE + 0x12) /* BRC 2 */
-#define DCRN_BRCR3 (DCRN_EBIMC_BASE + 0x13) /* BRC 3 */
-#define DCRN_BRCR4 (DCRN_EBIMC_BASE + 0x14) /* BRC 4 */
-#define DCRN_BRCR5 (DCRN_EBIMC_BASE + 0x15) /* BRC 5 */
-#define DCRN_BRCR6 (DCRN_EBIMC_BASE + 0x16) /* BRC 6 */
-#define DCRN_BRCR7 (DCRN_EBIMC_BASE + 0x17) /* BRC 7 */
-#define DCRN_BEAR0 (DCRN_EBIMC_BASE + 0x20) /* Bus Error Address Register */
-#define DCRN_BESR0 (DCRN_EBIMC_BASE + 0x21) /* Bus Error Status Register */
-#define DCRN_BIUCR (DCRN_EBIMC_BASE + 0x2A) /* Bus Interfac Unit Ctrl Reg */
-
-#include <asm/ibm405.h>
-
-#endif /* __ASM_IBMSTB4_H__ */
-#endif /* __KERNEL__ */