diff options
Diffstat (limited to 'arch/ppc64/kernel/entry.S')
| -rw-r--r-- | arch/ppc64/kernel/entry.S | 845 |
1 files changed, 0 insertions, 845 deletions
diff --git a/arch/ppc64/kernel/entry.S b/arch/ppc64/kernel/entry.S deleted file mode 100644 index 5d2fcbe384c..00000000000 --- a/arch/ppc64/kernel/entry.S +++ /dev/null @@ -1,845 +0,0 @@ -/* - * arch/ppc64/kernel/entry.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net). - * - * This file contains the system call entry code, context switch - * code, and exception/interrupt return code for PowerPC. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/errno.h> -#include <asm/unistd.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cputable.h> - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif - -/* - * System calls. - */ - .section ".toc","aw" -.SYS_CALL_TABLE: - .tc .sys_call_table[TC],.sys_call_table - -.SYS_CALL_TABLE32: - .tc .sys_call_table32[TC],.sys_call_table32 - -/* This value is used to mark exception frames on the stack. */ -exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 - - .section ".text" - .align 7 - -#undef SHOW_SYSCALLS - - .globl system_call_common -system_call_common: - andi. r10,r12,MSR_PR - mr r10,r1 - addi r1,r1,-INT_FRAME_SIZE - beq- 1f - ld r1,PACAKSAVE(r13) -1: std r10,0(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - std r0,GPR0(r1) - std r10,GPR1(r1) - std r2,GPR2(r1) - std r3,GPR3(r1) - std r4,GPR4(r1) - std r5,GPR5(r1) - std r6,GPR6(r1) - std r7,GPR7(r1) - std r8,GPR8(r1) - li r11,0 - std r11,GPR9(r1) - std r11,GPR10(r1) - std r11,GPR11(r1) - std r11,GPR12(r1) - std r9,GPR13(r1) - crclr so - mfcr r9 - mflr r10 - li r11,0xc01 - std r9,_CCR(r1) - std r10,_LINK(r1) - std r11,_TRAP(r1) - mfxer r9 - mfctr r10 - std r9,_XER(r1) - std r10,_CTR(r1) - std r3,ORIG_GPR3(r1) - ld r2,PACATOC(r13) - addi r9,r1,STACK_FRAME_OVERHEAD - ld r11,exception_marker@toc(r2) - std r11,-16(r9) /* "regshere" marker */ -#ifdef CONFIG_PPC_ISERIES - /* Hack for handling interrupts when soft-enabling on iSeries */ - cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ - andi. r10,r12,MSR_PR /* from kernel */ - crand 4*cr0+eq,4*cr1+eq,4*cr0+eq - beq hardware_interrupt_entry - lbz r10,PACAPROCENABLED(r13) - std r10,SOFTE(r1) -#endif - mfmsr r11 - ori r11,r11,MSR_EE - mtmsrd r11,1 - -#ifdef SHOW_SYSCALLS - bl .do_show_syscall - REST_GPR(0,r1) - REST_4GPRS(3,r1) - REST_2GPRS(7,r1) - addi r9,r1,STACK_FRAME_OVERHEAD -#endif - clrrdi r11,r1,THREAD_SHIFT - li r12,0 - ld r10,TI_FLAGS(r11) - stb r12,TI_SC_NOERR(r11) - andi. r11,r10,_TIF_SYSCALL_T_OR_A - bne- syscall_dotrace -syscall_dotrace_cont: - cmpldi 0,r0,NR_syscalls - bge- syscall_enosys - -system_call: /* label this so stack traces look sane */ -/* - * Need to vector to 32 Bit or default sys_call_table here, - * based on caller's run-mode / personality. - */ - ld r11,.SYS_CALL_TABLE@toc(2) - andi. r10,r10,_TIF_32BIT - beq 15f - ld r11,.SYS_CALL_TABLE32@toc(2) - clrldi r3,r3,32 - clrldi r4,r4,32 - clrldi r5,r5,32 - clrldi r6,r6,32 - clrldi r7,r7,32 - clrldi r8,r8,32 -15: - slwi r0,r0,3 - ldx r10,r11,r0 /* Fetch system call handler [ptr] */ - mtctr r10 - bctrl /* Call handler */ - -syscall_exit: -#ifdef SHOW_SYSCALLS - std r3,GPR3(r1) - bl .do_show_syscall_exit - ld r3,GPR3(r1) -#endif - std r3,RESULT(r1) - ld r5,_CCR(r1) - li r10,-_LAST_ERRNO - cmpld r3,r10 - clrrdi r12,r1,THREAD_SHIFT - bge- syscall_error -syscall_error_cont: - - /* check for syscall tracing or audit */ - ld r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - bne- syscall_exit_trace -syscall_exit_trace_cont: - - /* disable interrupts so current_thread_info()->flags can't change, - and so that we don't get interrupted after loading SRR0/1. */ - ld r8,_MSR(r1) - andi. r10,r8,MSR_RI - beq- unrecov_restore - mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 - mtmsrd r10,1 - ld r9,TI_FLAGS(r12) - andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SIGPENDING|_TIF_NEED_RESCHED) - bne- syscall_exit_work - ld r7,_NIP(r1) - stdcx. r0,0,r1 /* to clear the reservation */ - andi. r6,r8,MSR_PR - ld r4,_LINK(r1) - beq- 1f /* only restore r13 if */ - ld r13,GPR13(r1) /* returning to usermode */ -1: ld r2,GPR2(r1) - li r12,MSR_RI - andc r10,r10,r12 - mtmsrd r10,1 /* clear MSR.RI */ - ld r1,GPR1(r1) - mtlr r4 - mtcr r5 - mtspr SPRN_SRR0,r7 - mtspr SPRN_SRR1,r8 - rfid - b . /* prevent speculative execution */ - -syscall_enosys: - li r3,-ENOSYS - std r3,RESULT(r1) - clrrdi r12,r1,THREAD_SHIFT - ld r5,_CCR(r1) - -syscall_error: - lbz r11,TI_SC_NOERR(r12) - cmpwi 0,r11,0 - bne- syscall_error_cont - neg r3,r3 - oris r5,r5,0x1000 /* Set SO bit in CR */ - std r5,_CCR(r1) - b syscall_error_cont - -/* Traced system call support */ -syscall_dotrace: - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_enter - ld r0,GPR0(r1) /* Restore original registers */ - ld r3,GPR3(r1) - ld r4,GPR4(r1) - ld r5,GPR5(r1) - ld r6,GPR6(r1) - ld r7,GPR7(r1) - ld r8,GPR8(r1) - addi r9,r1,STACK_FRAME_OVERHEAD - clrrdi r10,r1,THREAD_SHIFT - ld r10,TI_FLAGS(r10) - b syscall_dotrace_cont - -syscall_exit_trace: - std r3,GPR3(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_leave - REST_NVGPRS(r1) - ld r3,GPR3(r1) - ld r5,_CCR(r1) - clrrdi r12,r1,THREAD_SHIFT - b syscall_exit_trace_cont - -/* Stuff to do on exit from a system call. */ -syscall_exit_work: - std r3,GPR3(r1) - std r5,_CCR(r1) - b .ret_from_except_lite - -/* Save non-volatile GPRs, if not already saved. */ -_GLOBAL(save_nvgprs) - ld r11,_TRAP(r1) - andi. r0,r11,1 - beqlr- - SAVE_NVGPRS(r1) - clrrdi r0,r11,1 - std r0,_TRAP(r1) - blr - -/* - * The sigsuspend and rt_sigsuspend system calls can call do_signal - * and thus put the process into the stopped state where we might - * want to examine its user state with ptrace. Therefore we need - * to save all the nonvolatile registers (r14 - r31) before calling - * the C code. Similarly, fork, vfork and clone need the full - * register state on the stack so that it can be copied to the child. - */ -_GLOBAL(ppc32_sigsuspend) - bl .save_nvgprs - bl .compat_sys_sigsuspend - b 70f - -_GLOBAL(ppc64_rt_sigsuspend) - bl .save_nvgprs - bl .sys_rt_sigsuspend - b 70f - -_GLOBAL(ppc32_rt_sigsuspend) - bl .save_nvgprs - bl .compat_sys_rt_sigsuspend -70: cmpdi 0,r3,0 - /* If it returned an error, we need to return via syscall_exit to set - the SO bit in cr0 and potentially stop for ptrace. */ - bne syscall_exit - /* If sigsuspend() returns zero, we are going into a signal handler. We - may need to call audit_syscall_exit() to mark the exit from sigsuspend() */ -#ifdef CONFIG_AUDIT - ld r3,PACACURRENT(r13) - ld r4,AUDITCONTEXT(r3) - cmpdi 0,r4,0 - beq .ret_from_except /* No audit_context: Leave immediately. */ - li r4, 2 /* AUDITSC_FAILURE */ - li r5,-4 /* It's always -EINTR */ - bl .audit_syscall_exit -#endif - b .ret_from_except - -_GLOBAL(ppc_fork) - bl .save_nvgprs - bl .sys_fork - b syscall_exit - -_GLOBAL(ppc_vfork) - bl .save_nvgprs - bl .sys_vfork - b syscall_exit - -_GLOBAL(ppc_clone) - bl .save_nvgprs - bl .sys_clone - b syscall_exit - -_GLOBAL(ppc32_swapcontext) - bl .save_nvgprs - bl .compat_sys_swapcontext - b 80f - -_GLOBAL(ppc64_swapcontext) - bl .save_nvgprs - bl .sys_swapcontext - b 80f - -_GLOBAL(ppc32_sigreturn) - bl .compat_sys_sigreturn - b 80f - -_GLOBAL(ppc32_rt_sigreturn) - bl .compat_sys_rt_sigreturn - b 80f - -_GLOBAL(ppc64_rt_sigreturn) - bl .sys_rt_sigreturn - -80: cmpdi 0,r3,0 - blt syscall_exit - clrrdi r4,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r4) - andi. r4,r4,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP) - beq+ 81f - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_syscall_trace_leave -81: b .ret_from_except - -_GLOBAL(ret_from_fork) - bl .schedule_tail - REST_NVGPRS(r1) - li r3,0 - b syscall_exit - -/* - * This routine switches between two different tasks. The process - * state of one is saved on its kernel stack. Then the state - * of the other is restored from its kernel stack. The memory - * management hardware is updated to the second process's state. - * Finally, we can return to the second process, via ret_from_except. - * On entry, r3 points to the THREAD for the current task, r4 - * points to the THREAD for the new task. - * - * Note: there are two ways to get to the "going out" portion - * of this code; either by coming in via the entry (_switch) - * or via "fork" which must set up an environment equivalent - * to the "_switch" path. If you change this you'll have to change - * the fork code also. - * - * The code which creates the new task context is in 'copy_thread' - * in arch/ppc64/kernel/process.c - */ - .align 7 -_GLOBAL(_switch) - mflr r0 - std r0,16(r1) - stdu r1,-SWITCH_FRAME_SIZE(r1) - /* r3-r13 are caller saved -- Cort */ - SAVE_8GPRS(14, r1) - SAVE_10GPRS(22, r1) - mflr r20 /* Return to switch caller */ - mfmsr r22 - li r0, MSR_FP -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - oris r0,r0,MSR_VEC@h /* Disable altivec */ - mfspr r24,SPRN_VRSAVE /* save vrsave register value */ - std r24,THREAD_VRSAVE(r3) -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif /* CONFIG_ALTIVEC */ - and. r0,r0,r22 - beq+ 1f - andc r22,r22,r0 - mtmsrd r22 - isync -1: std r20,_NIP(r1) - mfcr r23 - std r23,_CCR(r1) - std r1,KSP(r3) /* Set old stack pointer */ - -#ifdef CONFIG_SMP - /* We need a sync somewhere here to make sure that if the - * previous task gets rescheduled on another CPU, it sees all - * stores it has performed on this one. - */ - sync -#endif /* CONFIG_SMP */ - - addi r6,r4,-THREAD /* Convert THREAD to 'current' */ - std r6,PACACURRENT(r13) /* Set new 'current' */ - - ld r8,KSP(r4) /* new stack pointer */ -BEGIN_FTR_SECTION - clrrdi r6,r8,28 /* get its ESID */ - clrrdi r9,r1,28 /* get current sp ESID */ - clrldi. r0,r6,2 /* is new ESID c00000000? */ - cmpd cr1,r6,r9 /* or is new ESID the same as current ESID? */ - cror eq,4*cr1+eq,eq - beq 2f /* if yes, don't slbie it */ - - /* Bolt in the new stack SLB entry */ - ld r7,KSP_VSID(r4) /* Get new stack's VSID */ - oris r0,r6,(SLB_ESID_V)@h - ori r0,r0,(SLB_NUM_BOLTED-1)@l - slbie r6 - slbie r6 /* Workaround POWER5 < DD2.1 issue */ - slbmte r7,r0 - isync - -2: -END_FTR_SECTION_IFSET(CPU_FTR_SLB) - clrrdi r7,r8,THREAD_SHIFT /* base of new stack */ - /* Note: this uses SWITCH_FRAME_SIZE rather than INT_FRAME_SIZE - because we don't need to leave the 288-byte ABI gap at the - top of the kernel stack. */ - addi r7,r7,THREAD_SIZE-SWITCH_FRAME_SIZE - - mr r1,r8 /* start using new stack pointer */ - std r7,PACAKSAVE(r13) - - ld r6,_CCR(r1) - mtcrf 0xFF,r6 - -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - ld r0,THREAD_VRSAVE(r4) - mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif /* CONFIG_ALTIVEC */ - - /* r3-r13 are destroyed -- Cort */ - REST_8GPRS(14, r1) - REST_10GPRS(22, r1) - - /* convert old thread to its task_struct for return value */ - addi r3,r3,-THREAD - ld r7,_NIP(r1) /* Return to _switch caller in new task */ - mtlr r7 - addi r1,r1,SWITCH_FRAME_SIZE - blr - - .align 7 -_GLOBAL(ret_from_except) - ld r11,_TRAP(r1) - andi. r0,r11,1 - bne .ret_from_except_lite - REST_NVGPRS(r1) - -_GLOBAL(ret_from_except_lite) - /* - * Disable interrupts so that current_thread_info()->flags - * can't change between when we test it and when we return - * from the interrupt. - */ - mfmsr r10 /* Get current interrupt state */ - rldicl r9,r10,48,1 /* clear MSR_EE */ - rotldi r9,r9,16 - mtmsrd r9,1 /* Update machine state */ - -#ifdef CONFIG_PREEMPT - clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ - li r0,_TIF_NEED_RESCHED /* bits to check */ - ld r3,_MSR(r1) - ld r4,TI_FLAGS(r9) - /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ - rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING - and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ - bne do_work - -#else /* !CONFIG_PREEMPT */ - ld r3,_MSR(r1) /* Returning to user mode? */ - andi. r3,r3,MSR_PR - beq restore /* if not, just restore regs and return */ - - /* Check current_thread_info()->flags */ - clrrdi r9,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_USER_WORK_MASK - bne do_work -#endif - -restore: -#ifdef CONFIG_PPC_ISERIES - ld r5,SOFTE(r1) - cmpdi 0,r5,0 - beq 4f - /* Check for pending interrupts (iSeries) */ - ld r3,PACALPPACA+LPPACAANYINT(r13) - cmpdi r3,0 - beq+ 4f /* skip do_IRQ if no interrupts */ - - li r3,0 - stb r3,PACAPROCENABLED(r13) /* ensure we are soft-disabled */ - ori r10,r10,MSR_EE - mtmsrd r10 /* hard-enable again */ - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite /* loop back and handle more */ - -4: stb r5,PACAPROCENABLED(r13) -#endif - - ld r3,_MSR(r1) - andi. r0,r3,MSR_RI - beq- unrecov_restore - - andi. r0,r3,MSR_PR - - /* - * r13 is our per cpu area, only restore it if we are returning to - * userspace - */ - beq 1f - REST_GPR(13, r1) -1: - ld r3,_CTR(r1) - ld r0,_LINK(r1) - mtctr r3 - mtlr r0 - ld r3,_XER(r1) - mtspr SPRN_XER,r3 - - REST_8GPRS(5, r1) - - stdcx. r0,0,r1 /* to clear the reservation */ - - mfmsr r0 - li r2, MSR_RI - andc r0,r0,r2 - mtmsrd r0,1 - - ld r0,_MSR(r1) - mtspr SPRN_SRR1,r0 - - ld r2,_CCR(r1) - mtcrf 0xFF,r2 - ld r2,_NIP(r1) - mtspr SPRN_SRR0,r2 - - ld r0,GPR0(r1) - ld r2,GPR2(r1) - ld r3,GPR3(r1) - ld r4,GPR4(r1) - ld r1,GPR1(r1) - - rfid - b . /* prevent speculative execution */ - -/* Note: this must change if we start using the TIF_NOTIFY_RESUME bit */ -do_work: -#ifdef CONFIG_PREEMPT - andi. r0,r3,MSR_PR /* Returning to user mode? */ - bne user_work - /* Check that preempt_count() == 0 and interrupts are enabled */ - lwz r8,TI_PREEMPT(r9) - cmpwi cr1,r8,0 -#ifdef CONFIG_PPC_ISERIES - ld r0,SOFTE(r1) - cmpdi r0,0 -#else - andi. r0,r3,MSR_EE -#endif - crandc eq,cr1*4+eq,eq - bne restore - /* here we are preempting the current task */ -1: -#ifdef CONFIG_PPC_ISERIES - li r0,1 - stb r0,PACAPROCENABLED(r13) -#endif - ori r10,r10,MSR_EE - mtmsrd r10,1 /* reenable interrupts */ - bl .preempt_schedule - mfmsr r10 - clrrdi r9,r1,THREAD_SHIFT - rldicl r10,r10,48,1 /* disable interrupts again */ - rotldi r10,r10,16 - mtmsrd r10,1 - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_NEED_RESCHED - bne 1b - b restore - -user_work: -#endif - /* Enable interrupts */ - ori r10,r10,MSR_EE - mtmsrd r10,1 - - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - bl .schedule - b .ret_from_except_lite - -1: bl .save_nvgprs - li r3,0 - addi r4,r1,STACK_FRAME_OVERHEAD - bl .do_signal - b .ret_from_except - -unrecov_restore: - addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b unrecov_restore - -#ifdef CONFIG_PPC_RTAS -/* - * On CHRP, the Run-Time Abstraction Services (RTAS) have to be - * called with the MMU off. - * - * In addition, we need to be in 32b mode, at least for now. - * - * Note: r3 is an input parameter to rtas, so don't trash it... - */ -_GLOBAL(enter_rtas) - mflr r0 - std r0,16(r1) - stdu r1,-RTAS_FRAME_SIZE(r1) /* Save SP and create stack space. */ - - /* Because RTAS is running in 32b mode, it clobbers the high order half - * of all registers that it saves. We therefore save those registers - * RTAS might touch to the stack. (r0, r3-r13 are caller saved) - */ - SAVE_GPR(2, r1) /* Save the TOC */ - SAVE_GPR(13, r1) /* Save paca */ - SAVE_8GPRS(14, r1) /* Save the non-volatiles */ - SAVE_10GPRS(22, r1) /* ditto */ - - mfcr r4 - std r4,_CCR(r1) - mfctr r5 - std r5,_CTR(r1) - mfspr r6,SPRN_XER - std r6,_XER(r1) - mfdar r7 - std r7,_DAR(r1) - mfdsisr r8 - std r8,_DSISR(r1) - mfsrr0 r9 - std r9,_SRR0(r1) - mfsrr1 r10 - std r10,_SRR1(r1) - - /* There is no way it is acceptable to get here with interrupts enabled, - * check it with the asm equivalent of WARN_ON - */ - mfmsr r6 - andi. r0,r6,MSR_EE -1: tdnei r0,0 -.section __bug_table,"a" - .llong 1b,__LINE__ + 0x1000000, 1f, 2f -.previous -.section .rodata,"a" -1: .asciz __FILE__ -2: .asciz "enter_rtas" -.previous - - /* Unfortunately, the stack pointer and the MSR are also clobbered, - * so they are saved in the PACA which allows us to restore - * our original state after RTAS returns. - */ - std r1,PACAR1(r13) - std r6,PACASAVEDMSR(r13) - - /* Setup our real return addr */ - SET_REG_TO_LABEL(r4,.rtas_return_loc) - SET_REG_TO_CONST(r9,KERNELBASE) - sub r4,r4,r9 - mtlr r4 - - li r0,0 - ori r0,r0,MSR_EE|MSR_SE|MSR_BE|MSR_RI - andc r0,r6,r0 - - li r9,1 - rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) - ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP - andc r6,r0,r9 - ori r6,r6,MSR_RI - sync /* disable interrupts so SRR0/1 */ - mtmsrd r0 /* don't get trashed */ - - SET_REG_TO_LABEL(r4,rtas) - ld r5,RTASENTRY(r4) /* get the rtas->entry value */ - ld r4,RTASBASE(r4) /* get the rtas->base value */ - - mtspr SPRN_SRR0,r5 - mtspr SPRN_SRR1,r6 - rfid - b . /* prevent speculative execution */ - -_STATIC(rtas_return_loc) - /* relocation is off at this point */ - mfspr r4,SPRN_SPRG3 /* Get PACA */ - SET_REG_TO_CONST(r5, KERNELBASE) - sub r4,r4,r5 /* RELOC the PACA base pointer */ - - mfmsr r6 - li r0,MSR_RI - andc r6,r6,r0 - sync - mtmsrd r6 - - ld r1,PACAR1(r4) /* Restore our SP */ - LOADADDR(r3,.rtas_restore_regs) - ld r4,PACASAVEDMSR(r4) /* Restore our MSR */ - - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ - -_STATIC(rtas_restore_regs) - /* relocation is on at this point */ - REST_GPR(2, r1) /* Restore the TOC */ - REST_GPR(13, r1) /* Restore paca */ - REST_8GPRS(14, r1) /* Restore the non-volatiles */ - REST_10GPRS(22, r1) /* ditto */ - - mfspr r13,SPRN_SPRG3 - - ld r4,_CCR(r1) - mtcr r4 - ld r5,_CTR(r1) - mtctr r5 - ld r6,_XER(r1) - mtspr SPRN_XER,r6 - ld r7,_DAR(r1) - mtdar r7 - ld r8,_DSISR(r1) - mtdsisr r8 - ld r9,_SRR0(r1) - mtsrr0 r9 - ld r10,_SRR1(r1) - mtsrr1 r10 - - addi r1,r1,RTAS_FRAME_SIZE /* Unstack our frame */ - ld r0,16(r1) /* get return address */ - - mtlr r0 - blr /* return to caller */ - -#endif /* CONFIG_PPC_RTAS */ - -#ifdef CONFIG_PPC_MULTIPLATFORM - -_GLOBAL(enter_prom) - mflr r0 - std r0,16(r1) - stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */ - - /* Because PROM is running in 32b mode, it clobbers the high order half - * of all registers that it saves. We therefore save those registers - * PROM might touch to the stack. (r0, r3-r13 are caller saved) - */ - SAVE_8GPRS(2, r1) - SAVE_GPR(13, r1) - SAVE_8GPRS(14, r1) - SAVE_10GPRS(22, r1) - mfcr r4 - std r4,_CCR(r1) - mfctr r5 - std r5,_CTR(r1) - mfspr r6,SPRN_XER - std r6,_XER(r1) - mfdar r7 - std r7,_DAR(r1) - mfdsisr r8 - std r8,_DSISR(r1) - mfsrr0 r9 - std r9,_SRR0(r1) - mfsrr1 r10 - std r10,_SRR1(r1) - mfmsr r11 - std r11,_MSR(r1) - - /* Get the PROM entrypoint */ - ld r0,GPR4(r1) - mtlr r0 - - /* Switch MSR to 32 bits mode - */ - mfmsr r11 - li r12,1 - rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) - andc r11,r11,r12 - li r12,1 - rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) - andc r11,r11,r12 - mtmsrd r11 - isync - - /* Restore arguments & enter PROM here... */ - ld r3,GPR3(r1) - blrl - - /* Just make sure that r1 top 32 bits didn't get - * corrupt by OF - */ - rldicl r1,r1,0,32 - - /* Restore the MSR (back to 64 bits) */ - ld r0,_MSR(r1) - mtmsrd r0 - isync - - /* Restore other registers */ - REST_GPR(2, r1) - REST_GPR(13, r1) - REST_8GPRS(14, r1) - REST_10GPRS(22, r1) - ld r4,_CCR(r1) - mtcr r4 - ld r5,_CTR(r1) - mtctr r5 - ld r6,_XER(r1) - mtspr SPRN_XER,r6 - ld r7,_DAR(r1) - mtdar r7 - ld r8,_DSISR(r1) - mtdsisr r8 - ld r9,_SRR0(r1) - mtsrr0 r9 - ld r10,_SRR1(r1) - mtsrr1 r10 - - addi r1,r1,PROM_FRAME_SIZE - ld r0,16(r1) - mtlr r0 - blr - -#endif /* CONFIG_PPC_MULTIPLATFORM */ |