1 files changed, 96 insertions, 0 deletions
diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
new file mode 100644
index 00000000000..155d139884c
--- /dev/null
+++ b/arch/sh/cchips/Kconfig
@@ -0,0 +1,96 @@
+menu "Companion Chips"
+
+config VOYAGERGX
+	bool "VoyagerGX chip support"
+	depends on SH_RTS7751R2D
+	help
+	  Selecting this option will support Silicon Motion, Inc. SM501.
+	  Designed to complement needs for the embedded industry, it
+	  provides video and 2D capability. To reduce system cost a
+	  wide variety of include I/O is supported, including analog RGB
+	  and digital LCD Panel interface, 8-bit parallel interface, USB,
+	  UART, IrDA, Zoom Video, AC97 or I2S, SSP, PWM, and I2C. There
+	  are additional GPIO bits that can be used to interface to
+	  external as well.
+
+# A board must have defined HD6446X_SERIES in order to see these
+config HD6446X_SERIES
+	bool "HD6446x support"
+	default n
+
+choice
+	prompt "HD6446x options"
+	depends on HD6446X_SERIES
+	default HD64461
+
+config HD64461
+	bool "Hitachi HD64461 companion chip support"
+	depends on CPU_SUBTYPE_SH7709
+	---help---
+	  The Hitachi HD64461 provides an interface for
+	  the SH7709 CPU, supporting a LCD controller,
+	  CRT color controller, IrDA up to 4 Mbps, and a
+	  PCMCIA controller supporting 2 slots.
+
+	  More information is available at
+	  <http://semiconductor.hitachi.com/windowsce/superh/sld013.htm>.
+
+	  Say Y if you want support for the HD64461.
+	  Otherwise, say N.
+
+config HD64465
+	bool "Hitachi HD64465 companion chip support"
+	depends on CPU_SUBTYPE_SH7750
+	---help---
+	  The Hitachi HD64465 provides an interface for
+	  the SH7750 CPU, supporting a LCD controller,
+	  CRT color controller, IrDA, USB, PCMCIA,
+	  keyboard controller, and a printer interface.
+
+	  More information is available at
+	  <http://global.hitachi.com/New/cnews/E/1998/981019B.html>.
+
+	  Say Y if you want support for the HD64465.
+	  Otherwise, say N.
+
+endchoice
+
+# These will also be split into the Kconfig's below
+config HD64461_IRQ
+	int "HD64461 IRQ"
+	depends on HD64461
+	default "36"
+	help
+	  The default setting of the HD64461 IRQ is 36.
+
+	  Do not change this unless you know what you are doing.
+
+config HD64461_ENABLER
+	bool "HD64461 PCMCIA enabler"
+	depends on HD64461
+	help
+	  Say Y here if you want to enable PCMCIA support
+	  via the HD64461 companion chip.
+	  Otherwise, say N.
+
+
+config HD64465_IOBASE
+	hex "HD64465 start address"
+	depends on HD64465
+	default "0xb0000000"
+	help
+	  The default setting of the HD64465 IO base address is 0xb0000000.
+
+	  Do not change this unless you know what you are doing.
+
+config HD64465_IRQ
+	int "HD64465 IRQ"
+	depends on HD64465
+	default "5"
+	help
+	  The default setting of the HD64465 IRQ is 5.
+
+	  Do not change this unless you know what you are doing.
+
+endmenu
+