1 files changed, 0 insertions, 83 deletions
diff --git a/arch/sh/drivers/pci/ops-bigsur.c b/arch/sh/drivers/pci/ops-bigsur.c
deleted file mode 100644
index eb31be75152..00000000000
--- a/arch/sh/drivers/pci/ops-bigsur.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * linux/arch/sh/drivers/pci/ops-bigsur.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi Big Sur Evaluation Board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-#include <asm/bigsur/bigsur.h>
-
-#define BIGSUR_PCI_IO	0x4000
-#define BIGSUR_PCI_MEM	0xfd000000
-
-static struct resource sh7751_io_resource = {
-	.name		= "SH7751 IO",
-	.start		= BIGSUR_PCI_IO,
-	.end		= BIGSUR_PCI_IO + (64*1024) - 1,
-	.flags		= IORESOURCE_IO,
-};
-
-static struct resource sh7751_mem_resource = {
-	.name		= "SH7751 mem",
-	.start		= BIGSUR_PCI_MEM,
-	.end		= BIGSUR_PCI_MEM + (64*1024*1024) - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ 0, }
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= BIGSUR_LSR0_SIZE,
-	},
-
-	.window1	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= BIGSUR_LSR1_SIZE,
-	},
-};
-
-/*
- * Initialize the Big Sur PCI interface
- * Setup hardware to be Central Funtion
- * Copy the BSR regs to the PCI interface
- * Setup PCI windows into local RAM
- */
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	/*
-	 * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
-	 * interface is on the wrong end of the board so that it can also
-	 * support a V320 CPI interface chip...  Therefor the IRQ mapping is
-	 * somewhat use dependent... I'l assume a linear map for now, i.e.
-	 * INTA=slot0,pin0... INTD=slot3,pin0...
-	 */
-	int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
-
-	PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
-	       slot, pin-1+'A', irq);
-
-	return irq;
-}