summaryrefslogtreecommitdiffstats
path: root/arch/sparc/kernel/sun4m_irq.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sparc/kernel/sun4m_irq.c')
-rw-r--r--arch/sparc/kernel/sun4m_irq.c495
1 files changed, 253 insertions, 242 deletions
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 94e02de960e..f10317179ee 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -20,6 +20,8 @@
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
@@ -35,59 +37,27 @@
#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
-#include <asm/sbus.h>
#include <asm/cacheflush.h>
#include "irq.h"
-/* On the sun4m, just like the timers, we have both per-cpu and master
- * interrupt registers.
- */
-
-/* These registers are used for sending/receiving irqs from/to
- * different cpu's.
- */
-struct sun4m_intreg_percpu {
- unsigned int tbt; /* Interrupts still pending for this cpu. */
-
- /* These next two registers are WRITE-ONLY and are only
- * "on bit" sensitive, "off bits" written have NO affect.
- */
- unsigned int clear; /* Clear this cpus irqs here. */
- unsigned int set; /* Set this cpus irqs here. */
- unsigned char space[PAGE_SIZE - 12];
+struct sun4m_irq_percpu {
+ u32 pending;
+ u32 clear;
+ u32 set;
};
-/*
- * djhr
- * Actually the clear and set fields in this struct are misleading..
- * according to the SLAVIO manual (and the same applies for the SEC)
- * the clear field clears bits in the mask which will ENABLE that IRQ
- * the set field sets bits in the mask to DISABLE the IRQ.
- *
- * Also the undirected_xx address in the SLAVIO is defined as
- * RESERVED and write only..
- *
- * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor
- * sun4m machines, for MP the layout makes more sense.
- */
-struct sun4m_intregs {
- struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS];
- unsigned int tbt; /* IRQ's that are still pending. */
- unsigned int irqs; /* Master IRQ bits. */
-
- /* Again, like the above, two these registers are WRITE-ONLY. */
- unsigned int clear; /* Clear master IRQ's by setting bits here. */
- unsigned int set; /* Set master IRQ's by setting bits here. */
-
- /* This register is both READ and WRITE. */
- unsigned int undirected_target; /* Which cpu gets undirected irqs. */
+struct sun4m_irq_global {
+ u32 pending;
+ u32 mask;
+ u32 mask_clear;
+ u32 mask_set;
+ u32 interrupt_target;
};
-static unsigned long dummy;
-
-struct sun4m_intregs *sun4m_interrupts;
-unsigned long *irq_rcvreg = &dummy;
+/* Code in entry.S needs to get at these register mappings. */
+struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS];
+struct sun4m_irq_global __iomem *sun4m_irq_global;
/* Dave Redman (djhr@tadpole.co.uk)
* The sun4m interrupt registers.
@@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy;
#define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */
#define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */
-#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */
-#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */
+#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */
+#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */
+#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */
#define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */
#define SUN4M_INT_MODULE 0x00200000 /* module interrupt */
#define SUN4M_INT_VIDEO 0x00100000 /* onboard video */
@@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy;
#define SUN4M_INT_SERIAL 0x00008000 /* serial ports */
#define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */
#define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */
+#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */
+
+#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \
+ SUN4M_INT_M2S_WRITE_ERR | \
+ SUN4M_INT_ECC_ERR | \
+ SUN4M_INT_VME_ERR)
#define SUN4M_INT_SBUS(x) (1 << (x+7))
#define SUN4M_INT_VME(x) (1 << (x))
-/* These tables only apply for interrupts greater than 15..
- *
- * any intr value below 0x10 is considered to be a soft-int
- * this may be useful or it may not.. but that's how I've done it.
- * and it won't clash with what OBP is telling us about devices.
+/* Interrupt levels used by OBP */
+#define OBP_INT_LEVEL_SOFT 0x10
+#define OBP_INT_LEVEL_ONBOARD 0x20
+#define OBP_INT_LEVEL_SBUS 0x30
+#define OBP_INT_LEVEL_VME 0x40
+
+/* Interrupt level assignment on sun4m:
+ *
+ * level source
+ * ------------------------------------------------------------
+ * 1 softint-1
+ * 2 softint-2, VME/SBUS level 1
+ * 3 softint-3, VME/SBUS level 2
+ * 4 softint-4, onboard SCSI
+ * 5 softint-5, VME/SBUS level 3
+ * 6 softint-6, onboard ETHERNET
+ * 7 softint-7, VME/SBUS level 4
+ * 8 softint-8, onboard VIDEO
+ * 9 softint-9, VME/SBUS level 5, Module Interrupt
+ * 10 softint-10, system counter/timer
+ * 11 softint-11, VME/SBUS level 6, Floppy
+ * 12 softint-12, Keyboard/Mouse, Serial
+ * 13 softint-13, VME/SBUS level 7, ISDN Audio
+ * 14 softint-14, per-processor counter/timer
+ * 15 softint-15, Asynchronous Errors (broadcast)
*
- * take an encoded intr value and lookup if it's valid
- * then get the mask bits that match from irq_mask
+ * Each interrupt source is masked distinctly in the sun4m interrupt
+ * registers. The PIL level alone is therefore ambiguous, since multiple
+ * interrupt sources map to a single PIL.
*
- * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
+ * This ambiguity is resolved in the 'intr' property for device nodes
+ * in the OF device tree. Each 'intr' property entry is composed of
+ * two 32-bit words. The first word is the IRQ priority value, which
+ * is what we're intersted in. The second word is the IRQ vector, which
+ * is unused.
+ *
+ * The low 4 bits of the IRQ priority indicate the PIL, and the upper
+ * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20
+ * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled.
+ *
+ * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI
+ * whereas a value of 0x33 is SBUS level 2. Here are some sample
+ * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and
+ * Tadpole S3 GX systems.
+ *
+ * esp: 0x24 onboard ESP SCSI
+ * le: 0x26 onboard Lance ETHERNET
+ * p9100: 0x32 SBUS level 1 P9100 video
+ * bpp: 0x33 SBUS level 2 BPP parallel port device
+ * DBRI: 0x39 SBUS level 5 DBRI ISDN audio
+ * SUNW,leo: 0x39 SBUS level 5 LEO video
+ * pcmcia: 0x3b SBUS level 6 PCMCIA controller
+ * uctrl: 0x3b SBUS level 6 UCTRL device
+ * modem: 0x3d SBUS level 7 MODEM
+ * zs: 0x2c onboard keyboard/mouse/serial
+ * floppy: 0x2b onboard Floppy
+ * power: 0x22 onboard power device (XXX unknown mask bit XXX)
*/
-static unsigned char irq_xlate[32] = {
- /* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */
- 0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7,
- 0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0
-};
-static unsigned long irq_mask[] = {
- 0, /* illegal index */
- SUN4M_INT_SCSI, /* 1 irq 4 */
- SUN4M_INT_ETHERNET, /* 2 irq 6 */
- SUN4M_INT_VIDEO, /* 3 irq 8 */
- SUN4M_INT_REALTIME, /* 4 irq 10 */
- SUN4M_INT_FLOPPY, /* 5 irq 11 */
- (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */
- SUN4M_INT_MODULE_ERR, /* 7 irq 15 */
- SUN4M_INT_SBUS(0), /* 8 irq 2 */
- SUN4M_INT_SBUS(1), /* 9 irq 3 */
- SUN4M_INT_SBUS(2), /* 10 irq 5 */
- SUN4M_INT_SBUS(3), /* 11 irq 7 */
- SUN4M_INT_SBUS(4), /* 12 irq 9 */
- SUN4M_INT_SBUS(5), /* 13 irq 11 */
- SUN4M_INT_SBUS(6) /* 14 irq 13 */
+static unsigned long irq_mask[0x50] = {
+ /* SMP */
+ 0, SUN4M_SOFT_INT(1),
+ SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
+ SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
+ SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
+ SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
+ SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+ SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+ SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+ /* soft */
+ 0, SUN4M_SOFT_INT(1),
+ SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3),
+ SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5),
+ SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7),
+ SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9),
+ SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11),
+ SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13),
+ SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15),
+ /* onboard */
+ 0, 0, 0, 0,
+ SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0,
+ SUN4M_INT_VIDEO, SUN4M_INT_MODULE,
+ SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY,
+ (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS),
+ SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR,
+ /* sbus */
+ 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1),
+ 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3),
+ 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5),
+ 0, SUN4M_INT_SBUS(6), 0, 0,
+ /* vme */
+ 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1),
+ 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3),
+ 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5),
+ 0, SUN4M_INT_VME(6), 0, 0
};
-static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
-
-static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev,
- unsigned int sbint)
-{
- if (sbint >= sizeof(sun4m_pil_map)) {
- printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
- BUG();
- }
- return sun4m_pil_map[sbint] | 0x30;
-}
-
static unsigned long sun4m_get_irqmask(unsigned int irq)
{
unsigned long mask;
- if (irq > 0x20) {
- /* OBIO/SBUS interrupts */
- irq &= 0x1f;
- mask = irq_mask[irq_xlate[irq]];
- if (!mask)
- printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
- } else {
- /* Soft Interrupts will come here.
- * Currently there is no way to trigger them but I'm sure
- * something could be cooked up.
- */
- irq &= 0xf;
- mask = SUN4M_SOFT_INT(irq);
- }
+ if (irq < 0x50)
+ mask = irq_mask[irq];
+ else
+ mask = 0;
+
+ if (!mask)
+ printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n",
+ irq);
+
return mask;
}
@@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr)
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
- sun4m_interrupts->set = mask;
+ sbus_writel(mask, &sun4m_irq_global->mask_set);
else
- sun4m_interrupts->cpu_intregs[cpu].set = mask;
+ sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
local_irq_restore(flags);
}
@@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr)
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
- sun4m_interrupts->clear = mask;
+ sbus_writel(mask, &sun4m_irq_global->mask_clear);
else
- sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+ sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
local_irq_restore(flags);
} else {
local_irq_save(flags);
- sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
+ sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear);
local_irq_restore(flags);
}
}
@@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = {
/*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
/*10*/ SUN4M_INT_REALTIME,
/*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
-/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
-/*13*/ SUN4M_INT_AUDIO,
+/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
+/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO,
/*14*/ SUN4M_INT_E14,
-/*15*/ 0x00000000
+/*15*/ SUN4M_INT_ERROR
};
/* We assume the caller has disabled local interrupts when these are called,
@@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = {
*/
static void sun4m_disable_pil_irq(unsigned int pil)
{
- sun4m_interrupts->set = cpu_pil_to_imask[pil];
+ sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set);
}
static void sun4m_enable_pil_irq(unsigned int pil)
{
- sun4m_interrupts->clear = cpu_pil_to_imask[pil];
+ sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear);
}
#ifdef CONFIG_SMP
static void sun4m_send_ipi(int cpu, int level)
{
- unsigned long mask;
-
- mask = sun4m_get_irqmask(level);
- sun4m_interrupts->cpu_intregs[cpu].set = mask;
+ unsigned long mask = sun4m_get_irqmask(level);
+ sbus_writel(mask, &sun4m_irq_percpu[cpu]->set);
}
static void sun4m_clear_ipi(int cpu, int level)
{
- unsigned long mask;
-
- mask = sun4m_get_irqmask(level);
- sun4m_interrupts->cpu_intregs[cpu].clear = mask;
+ unsigned long mask = sun4m_get_irqmask(level);
+ sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear);
}
static void sun4m_set_udt(int cpu)
{
- sun4m_interrupts->undirected_target = cpu;
+ sbus_writel(cpu, &sun4m_irq_global->interrupt_target);
}
#endif
-#define OBIO_INTR 0x20
-#define TIMER_IRQ (OBIO_INTR | 10)
-#define PROFILE_IRQ (OBIO_INTR | 14)
+struct sun4m_timer_percpu {
+ u32 l14_limit;
+ u32 l14_count;
+ u32 l14_limit_noclear;
+ u32 user_timer_start_stop;
+};
+
+static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS];
+
+struct sun4m_timer_global {
+ u32 l10_limit;
+ u32 l10_count;
+ u32 l10_limit_noclear;
+ u32 reserved;
+ u32 timer_config;
+};
+
+static struct sun4m_timer_global __iomem *timers_global;
+
+#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10)
-static struct sun4m_timer_regs *sun4m_timers;
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
static void sun4m_clear_clock_irq(void)
{
- volatile unsigned int clear_intr;
- clear_intr = sun4m_timers->l10_timer_limit;
+ sbus_readl(&timers_global->l10_limit);
}
-static void sun4m_clear_profile_irq(int cpu)
+void sun4m_nmi(struct pt_regs *regs)
{
- volatile unsigned int clear;
-
- clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
+ unsigned long afsr, afar, si;
+
+ printk(KERN_ERR "Aieee: sun4m NMI received!\n");
+ /* XXX HyperSparc hack XXX */
+ __asm__ __volatile__("mov 0x500, %%g1\n\t"
+ "lda [%%g1] 0x4, %0\n\t"
+ "mov 0x600, %%g1\n\t"
+ "lda [%%g1] 0x4, %1\n\t" :
+ "=r" (afsr), "=r" (afar));
+ printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
+ si = sbus_readl(&sun4m_irq_global->pending);
+ printk(KERN_ERR "si=%08lx\n", si);
+ if (si & SUN4M_INT_MODULE_ERR)
+ printk(KERN_ERR "Module async error\n");
+ if (si & SUN4M_INT_M2S_WRITE_ERR)
+ printk(KERN_ERR "MBus/SBus async error\n");
+ if (si & SUN4M_INT_ECC_ERR)
+ printk(KERN_ERR "ECC memory error\n");
+ if (si & SUN4M_INT_VME_ERR)
+ printk(KERN_ERR "VME async error\n");
+ printk(KERN_ERR "you lose buddy boy...\n");
+ show_regs(regs);
+ prom_halt();
+}
+
+/* Exported for sun4m_smp.c */
+void sun4m_clear_profile_irq(int cpu)
+{
+ sbus_readl(&timers_percpu[cpu]->l14_limit);
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
- sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
+ sbus_writel(limit, &timers_percpu[cpu]->l14_limit);
}
static void __init sun4m_init_timers(irq_handler_t counter_fn)
{
- int reg_count, irq, cpu;
- struct linux_prom_registers cnt_regs[PROMREG_MAX];
- int obio_node, cnt_node;
- struct resource r;
-
- cnt_node = 0;
- if((obio_node =
- prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
- (obio_node = prom_getchild (obio_node)) == 0 ||
- (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
- prom_printf("Cannot find /obio/counter node\n");
- prom_halt();
+ struct device_node *dp = of_find_node_by_name(NULL, "counter");
+ int i, err, len, num_cpu_timers;
+ const u32 *addr;
+
+ if (!dp) {
+ printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
+ return;
}
- reg_count = prom_getproperty(cnt_node, "reg",
- (void *) cnt_regs, sizeof(cnt_regs));
- reg_count = (reg_count/sizeof(struct linux_prom_registers));
-
- /* Apply the obio ranges to the timer registers. */
- prom_apply_obio_ranges(cnt_regs, reg_count);
-
- cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
- cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
- cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
- for(obio_node = 1; obio_node < 4; obio_node++) {
- cnt_regs[obio_node].phys_addr =
- cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
- cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
- cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
+
+ addr = of_get_property(dp, "address", &len);
+ if (!addr) {
+ printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
+ return;
}
- memset((char*)&r, 0, sizeof(struct resource));
- /* Map the per-cpu Counter registers. */
- r.flags = cnt_regs[0].which_io;
- r.start = cnt_regs[0].phys_addr;
- sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
- PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
- /* Map the system Counter register. */
- /* XXX Here we expect consequent calls to yeld adjusent maps. */
- r.flags = cnt_regs[4].which_io;
- r.start = cnt_regs[4].phys_addr;
- sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
-
- sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10);
- master_l10_counter = &sun4m_timers->l10_cur_count;
- master_l10_limit = &sun4m_timers->l10_timer_limit;
-
- irq = request_irq(TIMER_IRQ,
- counter_fn,
- (IRQF_DISABLED | SA_STATIC_ALLOC),
- "timer", NULL);
- if (irq) {
- prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
- prom_halt();
+ num_cpu_timers = (len / sizeof(u32)) - 1;
+ for (i = 0; i < num_cpu_timers; i++) {
+ timers_percpu[i] = (void __iomem *)
+ (unsigned long) addr[i];
}
-
- if (!cpu_find_by_instance(1, NULL, NULL)) {
- for(cpu = 0; cpu < 4; cpu++)
- sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
- sun4m_interrupts->set = SUN4M_INT_E14;
- } else {
- sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
+ timers_global = (void __iomem *)
+ (unsigned long) addr[num_cpu_timers];
+
+ sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
+
+ master_l10_counter = &timers_global->l10_count;
+
+ err = request_irq(TIMER_IRQ, counter_fn,
+ (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL);
+ if (err) {
+ printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
+ err);
+ return;
}
+
+ for (i = 0; i < num_cpu_timers; i++)
+ sbus_writel(0, &timers_percpu[i]->l14_limit);
+ if (num_cpu_timers == 4)
+ sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set);
+
#ifdef CONFIG_SMP
{
unsigned long flags;
@@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn)
void __init sun4m_init_IRQ(void)
{
- int ie_node,i;
- struct linux_prom_registers int_regs[PROMREG_MAX];
- int num_regs;
- struct resource r;
- int mid;
-
- local_irq_disable();
- if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
- (ie_node = prom_getchild (ie_node)) == 0 ||
- (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
- prom_printf("Cannot find /obio/interrupt node\n");
- prom_halt();
+ struct device_node *dp = of_find_node_by_name(NULL, "interrupt");
+ int len, i, mid, num_cpu_iregs;
+ const u32 *addr;
+
+ if (!dp) {
+ printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
+ return;
}
- num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
- sizeof(int_regs));
- num_regs = (num_regs/sizeof(struct linux_prom_registers));
-
- /* Apply the obio ranges to these registers. */
- prom_apply_obio_ranges(int_regs, num_regs);
-
- int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
- int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
- int_regs[4].which_io = int_regs[num_regs-1].which_io;
- for(ie_node = 1; ie_node < 4; ie_node++) {
- int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
- int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
- int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
+
+ addr = of_get_property(dp, "address", &len);
+ if (!addr) {
+ printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
+ return;
}
- memset((char *)&r, 0, sizeof(struct resource));
- /* Map the interrupt registers for all possible cpus. */
- r.flags = int_regs[0].which_io;
- r.start = int_regs[0].phys_addr;
- sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
- PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
+ num_cpu_iregs = (len / sizeof(u32)) - 1;
+ for (i = 0; i < num_cpu_iregs; i++) {
+ sun4m_irq_percpu[i] = (void __iomem *)
+ (unsigned long) addr[i];
+ }
+ sun4m_irq_global = (void __iomem *)
+ (unsigned long) addr[num_cpu_iregs];
- /* Map the system interrupt control registers. */
- r.flags = int_regs[4].which_io;
- r.start = int_regs[4].phys_addr;
- sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
+ local_irq_disable();
- sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
+ sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set);
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
- sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
-
- if (!cpu_find_by_instance(1, NULL, NULL)) {
- /* system wide interrupts go to cpu 0, this should always
- * be safe because it is guaranteed to be fitted or OBP doesn't
- * come up
- *
- * Not sure, but writing here on SLAVIO systems may puke
- * so I don't do it unless there is more than 1 cpu.
- */
- irq_rcvreg = (unsigned long *)
- &sun4m_interrupts->undirected_target;
- sun4m_interrupts->undirected_target = 0;
- }
- BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
+ sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear);
+
+ if (num_cpu_iregs == 4)
+ sbus_writel(0, &sun4m_irq_global->interrupt_target);
+
BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
- BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
@@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void)
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
+
/* Cannot enable interrupts until OBP ticker is disabled. */
}