diff options
Diffstat (limited to 'arch/tile/lib')
| -rw-r--r-- | arch/tile/lib/Makefile | 16 | ||||
| -rw-r--r-- | arch/tile/lib/__invalidate_icache.S | 106 | ||||
| -rw-r--r-- | arch/tile/lib/atomic_32.c | 347 | ||||
| -rw-r--r-- | arch/tile/lib/atomic_asm_32.S | 197 | ||||
| -rw-r--r-- | arch/tile/lib/checksum.c | 102 | ||||
| -rw-r--r-- | arch/tile/lib/cpumask.c | 51 | ||||
| -rw-r--r-- | arch/tile/lib/delay.c | 34 | ||||
| -rw-r--r-- | arch/tile/lib/exports.c | 78 | ||||
| -rw-r--r-- | arch/tile/lib/mb_incoherent.S | 34 | ||||
| -rw-r--r-- | arch/tile/lib/memchr_32.c | 68 | ||||
| -rw-r--r-- | arch/tile/lib/memcpy_32.S | 628 | ||||
| -rw-r--r-- | arch/tile/lib/memcpy_tile64.c | 271 | ||||
| -rw-r--r-- | arch/tile/lib/memmove_32.c | 63 | ||||
| -rw-r--r-- | arch/tile/lib/memset_32.c | 274 | ||||
| -rw-r--r-- | arch/tile/lib/spinlock_32.c | 221 | ||||
| -rw-r--r-- | arch/tile/lib/spinlock_common.h | 64 | ||||
| -rw-r--r-- | arch/tile/lib/strchr_32.c | 66 | ||||
| -rw-r--r-- | arch/tile/lib/strlen_32.c | 36 | ||||
| -rw-r--r-- | arch/tile/lib/uaccess.c | 31 | ||||
| -rw-r--r-- | arch/tile/lib/usercopy_32.S | 223 |
20 files changed, 2910 insertions, 0 deletions
diff --git a/arch/tile/lib/Makefile b/arch/tile/lib/Makefile new file mode 100644 index 00000000000..ea9c209d33f --- /dev/null +++ b/arch/tile/lib/Makefile @@ -0,0 +1,16 @@ +# +# Makefile for TILE-specific library files.. +# + +lib-y = checksum.o cpumask.o delay.o __invalidate_icache.o \ + mb_incoherent.o uaccess.o \ + memcpy_$(BITS).o memchr_$(BITS).o memmove_$(BITS).o memset_$(BITS).o \ + strchr_$(BITS).o strlen_$(BITS).o + +ifneq ($(CONFIG_TILEGX),y) +lib-y += atomic_32.o atomic_asm_32.o memcpy_tile64.o +endif + +lib-$(CONFIG_SMP) += spinlock_$(BITS).o usercopy_$(BITS).o + +obj-$(CONFIG_MODULES) += exports.o diff --git a/arch/tile/lib/__invalidate_icache.S b/arch/tile/lib/__invalidate_icache.S new file mode 100644 index 00000000000..92e70505912 --- /dev/null +++ b/arch/tile/lib/__invalidate_icache.S @@ -0,0 +1,106 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * A routine for synchronizing the instruction and data caches. + * Useful for self-modifying code. + * + * r0 holds the buffer address + * r1 holds the size in bytes + */ + +#include <arch/chip.h> +#include <feedback.h> + +#if defined(__NEWLIB__) || defined(__BME__) +#include <sys/page.h> +#else +#include <asm/page.h> +#endif + +#ifdef __tilegx__ +/* Share code among Tile family chips but adjust opcodes appropriately. */ +#define slt cmpltu +#define bbst blbst +#define bnezt bnzt +#endif + +#if defined(__tilegx__) && __SIZEOF_POINTER__ == 4 +/* Force 32-bit ops so pointers wrap around appropriately. */ +#define ADD_PTR addx +#define ADDI_PTR addxi +#else +#define ADD_PTR add +#define ADDI_PTR addi +#endif + + .section .text.__invalidate_icache, "ax" + .global __invalidate_icache + .type __invalidate_icache,@function + .hidden __invalidate_icache + .align 8 +__invalidate_icache: + FEEDBACK_ENTER(__invalidate_icache) + { + ADD_PTR r1, r0, r1 /* end of buffer */ + blez r1, .Lexit /* skip out if size <= 0 */ + } + { + ADDI_PTR r1, r1, -1 /* point to last byte to flush */ + andi r0, r0, -CHIP_L1I_LINE_SIZE() /* align to cache-line size */ + } + { + andi r1, r1, -CHIP_L1I_LINE_SIZE() /* last cache line to flush */ + mf + } +#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE + { + moveli r4, CHIP_L1I_CACHE_SIZE() / PAGE_SIZE /* loop counter */ + move r2, r0 /* remember starting address */ + } +#endif + drain + { + slt r3, r0, r1 /* set up loop invariant */ +#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE + moveli r6, PAGE_SIZE +#endif + } +.Lentry: + { + icoh r0 + ADDI_PTR r0, r0, CHIP_L1I_LINE_SIZE() /* advance buffer */ + } + { + slt r3, r0, r1 /* check if buffer < buffer + size */ + bbst r3, .Lentry /* loop if buffer < buffer + size */ + } +#if CHIP_L1I_CACHE_SIZE() > PAGE_SIZE + { + ADD_PTR r2, r2, r6 + ADD_PTR r1, r1, r6 + } + { + move r0, r2 + addi r4, r4, -1 + } + { + slt r3, r0, r1 /* set up loop invariant */ + bnezt r4, .Lentry + } +#endif + drain +.Lexit: + jrp lr + +.Lend___invalidate_icache: + .size __invalidate_icache, \ + .Lend___invalidate_icache - __invalidate_icache diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c new file mode 100644 index 00000000000..be1e8acd105 --- /dev/null +++ b/arch/tile/lib/atomic_32.c @@ -0,0 +1,347 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/cache.h> +#include <linux/delay.h> +#include <linux/uaccess.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <asm/atomic.h> +#include <arch/chip.h> + +/* The routines in atomic_asm.S are private, so we only declare them here. */ +extern struct __get_user __atomic_cmpxchg(volatile int *p, + int *lock, int o, int n); +extern struct __get_user __atomic_xchg(volatile int *p, int *lock, int n); +extern struct __get_user __atomic_xchg_add(volatile int *p, int *lock, int n); +extern struct __get_user __atomic_xchg_add_unless(volatile int *p, + int *lock, int o, int n); +extern struct __get_user __atomic_or(volatile int *p, int *lock, int n); +extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n); +extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n); + +extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n); +extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n); +extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n); +extern u64 __atomic64_xchg_add_unless(volatile u64 *p, + int *lock, u64 o, u64 n); + + +/* See <asm/atomic.h> */ +#if ATOMIC_LOCKS_FOUND_VIA_TABLE() + +/* + * A block of memory containing locks for atomic ops. Each instance of this + * struct will be homed on a different CPU. + */ +struct atomic_locks_on_cpu { + int lock[ATOMIC_HASH_L2_SIZE]; +} __attribute__((aligned(ATOMIC_HASH_L2_SIZE * 4))); + +static DEFINE_PER_CPU(struct atomic_locks_on_cpu, atomic_lock_pool); + +/* The locks we'll use until __init_atomic_per_cpu is called. */ +static struct atomic_locks_on_cpu __initdata initial_atomic_locks; + +/* Hash into this vector to get a pointer to lock for the given atomic. */ +struct atomic_locks_on_cpu *atomic_lock_ptr[ATOMIC_HASH_L1_SIZE] + __write_once = { + [0 ... ATOMIC_HASH_L1_SIZE-1] (&initial_atomic_locks) +}; + +#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ + +/* This page is remapped on startup to be hash-for-home. */ +int atomic_locks[PAGE_SIZE / sizeof(int) /* Only ATOMIC_HASH_SIZE is used */] + __attribute__((aligned(PAGE_SIZE), section(".bss.page_aligned"))); + +#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ + +static inline int *__atomic_hashed_lock(volatile void *v) +{ + /* NOTE: this code must match "sys_cmpxchg" in kernel/intvec.S */ +#if ATOMIC_LOCKS_FOUND_VIA_TABLE() + unsigned long i = + (unsigned long) v & ((PAGE_SIZE-1) & -sizeof(long long)); + unsigned long n = __insn_crc32_32(0, i); + + /* Grab high bits for L1 index. */ + unsigned long l1_index = n >> ((sizeof(n) * 8) - ATOMIC_HASH_L1_SHIFT); + /* Grab low bits for L2 index. */ + unsigned long l2_index = n & (ATOMIC_HASH_L2_SIZE - 1); + + return &atomic_lock_ptr[l1_index]->lock[l2_index]; +#else + /* + * Use bits [3, 3 + ATOMIC_HASH_SHIFT) as the lock index. + * Using mm works here because atomic_locks is page aligned. + */ + unsigned long ptr = __insn_mm((unsigned long)v >> 1, + (unsigned long)atomic_locks, + 2, (ATOMIC_HASH_SHIFT + 2) - 1); + return (int *)ptr; +#endif +} + +#ifdef CONFIG_SMP +/* Return whether the passed pointer is a valid atomic lock pointer. */ +static int is_atomic_lock(int *p) +{ +#if ATOMIC_LOCKS_FOUND_VIA_TABLE() + int i; + for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) { + + if (p >= &atomic_lock_ptr[i]->lock[0] && + p < &atomic_lock_ptr[i]->lock[ATOMIC_HASH_L2_SIZE]) { + return 1; + } + } + return 0; +#else + return p >= &atomic_locks[0] && p < &atomic_locks[ATOMIC_HASH_SIZE]; +#endif +} + +void __atomic_fault_unlock(int *irqlock_word) +{ + BUG_ON(!is_atomic_lock(irqlock_word)); + BUG_ON(*irqlock_word != 1); + *irqlock_word = 0; +} + +#endif /* CONFIG_SMP */ + +static inline int *__atomic_setup(volatile void *v) +{ + /* Issue a load to the target to bring it into cache. */ + *(volatile int *)v; + return __atomic_hashed_lock(v); +} + +int _atomic_xchg(atomic_t *v, int n) +{ + return __atomic_xchg(&v->counter, __atomic_setup(v), n).val; +} +EXPORT_SYMBOL(_atomic_xchg); + +int _atomic_xchg_add(atomic_t *v, int i) +{ + return __atomic_xchg_add(&v->counter, __atomic_setup(v), i).val; +} +EXPORT_SYMBOL(_atomic_xchg_add); + +int _atomic_xchg_add_unless(atomic_t *v, int a, int u) +{ + /* + * Note: argument order is switched here since it is easier + * to use the first argument consistently as the "old value" + * in the assembly, as is done for _atomic_cmpxchg(). + */ + return __atomic_xchg_add_unless(&v->counter, __atomic_setup(v), u, a) + .val; +} +EXPORT_SYMBOL(_atomic_xchg_add_unless); + +int _atomic_cmpxchg(atomic_t *v, int o, int n) +{ + return __atomic_cmpxchg(&v->counter, __atomic_setup(v), o, n).val; +} +EXPORT_SYMBOL(_atomic_cmpxchg); + +unsigned long _atomic_or(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_or((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_or); + +unsigned long _atomic_andn(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_andn((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_andn); + +unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask) +{ + return __atomic_xor((int *)p, __atomic_setup(p), mask).val; +} +EXPORT_SYMBOL(_atomic_xor); + + +u64 _atomic64_xchg(atomic64_t *v, u64 n) +{ + return __atomic64_xchg(&v->counter, __atomic_setup(v), n); +} +EXPORT_SYMBOL(_atomic64_xchg); + +u64 _atomic64_xchg_add(atomic64_t *v, u64 i) +{ + return __atomic64_xchg_add(&v->counter, __atomic_setup(v), i); +} +EXPORT_SYMBOL(_atomic64_xchg_add); + +u64 _atomic64_xchg_add_unless(atomic64_t *v, u64 a, u64 u) +{ + /* + * Note: argument order is switched here since it is easier + * to use the first argument consistently as the "old value" + * in the assembly, as is done for _atomic_cmpxchg(). + */ + return __atomic64_xchg_add_unless(&v->counter, __atomic_setup(v), + u, a); +} +EXPORT_SYMBOL(_atomic64_xchg_add_unless); + +u64 _atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n) +{ + return __atomic64_cmpxchg(&v->counter, __atomic_setup(v), o, n); +} +EXPORT_SYMBOL(_atomic64_cmpxchg); + + +static inline int *__futex_setup(__user int *v) +{ + /* + * Issue a prefetch to the counter to bring it into cache. + * As for __atomic_setup, but we can't do a read into the L1 + * since it might fault; instead we do a prefetch into the L2. + */ + __insn_prefetch(v); + return __atomic_hashed_lock(v); +} + +struct __get_user futex_set(int *v, int i) +{ + return __atomic_xchg(v, __futex_setup(v), i); +} + +struct __get_user futex_add(int *v, int n) +{ + return __atomic_xchg_add(v, __futex_setup(v), n); +} + +struct __get_user futex_or(int *v, int n) +{ + return __atomic_or(v, __futex_setup(v), n); +} + +struct __get_user futex_andn(int *v, int n) +{ + return __atomic_andn(v, __futex_setup(v), n); +} + +struct __get_user futex_xor(int *v, int n) +{ + return __atomic_xor(v, __futex_setup(v), n); +} + +struct __get_user futex_cmpxchg(int *v, int o, int n) +{ + return __atomic_cmpxchg(v, __futex_setup(v), o, n); +} + +/* + * If any of the atomic or futex routines hit a bad address (not in + * the page tables at kernel PL) this routine is called. The futex + * routines are never used on kernel space, and the normal atomics and + * bitops are never used on user space. So a fault on kernel space + * must be fatal, but a fault on userspace is a futex fault and we + * need to return -EFAULT. Note that the context this routine is + * invoked in is the context of the "_atomic_xxx()" routines called + * by the functions in this file. + */ +struct __get_user __atomic_bad_address(int *addr) +{ + if (unlikely(!access_ok(VERIFY_WRITE, addr, sizeof(int)))) + panic("Bad address used for kernel atomic op: %p\n", addr); + return (struct __get_user) { .err = -EFAULT }; +} + + +#if CHIP_HAS_CBOX_HOME_MAP() +static int __init noatomichash(char *str) +{ + printk("noatomichash is deprecated.\n"); + return 1; +} +__setup("noatomichash", noatomichash); +#endif + +void __init __init_atomic_per_cpu(void) +{ +#if ATOMIC_LOCKS_FOUND_VIA_TABLE() + + unsigned int i; + int actual_cpu; + + /* + * Before this is called from setup, we just have one lock for + * all atomic objects/operations. Here we replace the + * elements of atomic_lock_ptr so that they point at per_cpu + * integers. This seemingly over-complex approach stems from + * the fact that DEFINE_PER_CPU defines an entry for each cpu + * in the grid, not each cpu from 0..ATOMIC_HASH_SIZE-1. But + * for efficient hashing of atomics to their locks we want a + * compile time constant power of 2 for the size of this + * table, so we use ATOMIC_HASH_SIZE. + * + * Here we populate atomic_lock_ptr from the per cpu + * atomic_lock_pool, interspersing by actual cpu so that + * subsequent elements are homed on consecutive cpus. + */ + + actual_cpu = cpumask_first(cpu_possible_mask); + + for (i = 0; i < ATOMIC_HASH_L1_SIZE; ++i) { + /* + * Preincrement to slightly bias against using cpu 0, + * which has plenty of stuff homed on it already. + */ + actual_cpu = cpumask_next(actual_cpu, cpu_possible_mask); + if (actual_cpu >= nr_cpu_ids) + actual_cpu = cpumask_first(cpu_possible_mask); + + atomic_lock_ptr[i] = &per_cpu(atomic_lock_pool, actual_cpu); + } + +#else /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ + + /* Validate power-of-two and "bigger than cpus" assumption */ + BUG_ON(ATOMIC_HASH_SIZE & (ATOMIC_HASH_SIZE-1)); + BUG_ON(ATOMIC_HASH_SIZE < nr_cpu_ids); + + /* + * On TILEPro we prefer to use a single hash-for-home + * page, since this means atomic operations are less + * likely to encounter a TLB fault and thus should + * in general perform faster. You may wish to disable + * this in situations where few hash-for-home tiles + * are configured. + */ + BUG_ON((unsigned long)atomic_locks % PAGE_SIZE != 0); + + /* The locks must all fit on one page. */ + BUG_ON(ATOMIC_HASH_SIZE * sizeof(int) > PAGE_SIZE); + + /* + * We use the page offset of the atomic value's address as + * an index into atomic_locks, excluding the low 3 bits. + * That should not produce more indices than ATOMIC_HASH_SIZE. + */ + BUG_ON((PAGE_SIZE >> 3) > ATOMIC_HASH_SIZE); + +#endif /* ATOMIC_LOCKS_FOUND_VIA_TABLE() */ + + /* The futex code makes this assumption, so we validate it here. */ + BUG_ON(sizeof(atomic_t) != sizeof(int)); +} diff --git a/arch/tile/lib/atomic_asm_32.S b/arch/tile/lib/atomic_asm_32.S new file mode 100644 index 00000000000..c0d05857819 --- /dev/null +++ b/arch/tile/lib/atomic_asm_32.S @@ -0,0 +1,197 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Support routines for atomic operations. Each function takes: + * + * r0: address to manipulate + * r1: pointer to atomic lock guarding this operation (for FUTEX_LOCK_REG) + * r2: new value to write, or for cmpxchg/add_unless, value to compare against + * r3: (cmpxchg/xchg_add_unless) new value to write or add; + * (atomic64 ops) high word of value to write + * r4/r5: (cmpxchg64/add_unless64) new value to write or add + * + * The 32-bit routines return a "struct __get_user" so that the futex code + * has an opportunity to return -EFAULT to the user if needed. + * The 64-bit routines just return a "long long" with the value, + * since they are only used from kernel space and don't expect to fault. + * Support for 16-bit ops is included in the framework but we don't provide + * any (x86_64 has an atomic_inc_short(), so we might want to some day). + * + * Note that the caller is advised to issue a suitable L1 or L2 + * prefetch on the address being manipulated to avoid extra stalls. + * In addition, the hot path is on two icache lines, and we start with + * a jump to the second line to make sure they are both in cache so + * that we never stall waiting on icache fill while holding the lock. + * (This doesn't work out with most 64-bit ops, since they consume + * too many bundles, so may take an extra i-cache stall.) + * + * These routines set the INTERRUPT_CRITICAL_SECTION bit, just + * like sys_cmpxchg(), so that NMIs like PERF_COUNT will not interrupt + * the code, just page faults. + * + * If the load or store faults in a way that can be directly fixed in + * the do_page_fault_ics() handler (e.g. a vmalloc reference) we fix it + * directly, return to the instruction that faulted, and retry it. + * + * If the load or store faults in a way that potentially requires us + * to release the atomic lock, then retry (e.g. a migrating PTE), we + * reset the PC in do_page_fault_ics() to the "tns" instruction so + * that on return we will reacquire the lock and restart the op. We + * are somewhat overloading the exception_table_entry notion by doing + * this, since those entries are not normally used for migrating PTEs. + * + * If the main page fault handler discovers a bad address, it will see + * the PC pointing to the "tns" instruction (due to the earlier + * exception_table_entry processing in do_page_fault_ics), and + * re-reset the PC to the fault handler, atomic_bad_address(), which + * effectively takes over from the atomic op and can either return a + * bad "struct __get_user" (for user addresses) or can just panic (for + * bad kernel addresses). + * + * Note that if the value we would store is the same as what we + * loaded, we bypass the load. Other platforms with true atomics can + * make the guarantee that a non-atomic __clear_bit(), for example, + * can safely race with an atomic test_and_set_bit(); this example is + * from bit_spinlock.h in slub_lock() / slub_unlock(). We can't do + * that on Tile since the "atomic" op is really just a + * read/modify/write, and can race with the non-atomic + * read/modify/write. However, if we can short-circuit the write when + * it is not needed, in the atomic case, we avoid the race. + */ + +#include <linux/linkage.h> +#include <asm/atomic.h> +#include <asm/page.h> +#include <asm/processor.h> + + .section .text.atomic,"ax" +ENTRY(__start_atomic_asm_code) + + .macro atomic_op, name, bitwidth, body + .align 64 +STD_ENTRY_SECTION(__atomic\name, .text.atomic) + { + movei r24, 1 + j 4f /* branch to second cache line */ + } +1: { + .ifc \bitwidth,16 + lh r22, r0 + .else + lw r22, r0 + addi r23, r0, 4 + .endif + } + .ifc \bitwidth,64 + lw r23, r23 + .endif + \body /* set r24, and r25 if 64-bit */ + { + seq r26, r22, r24 + seq r27, r23, r25 + } + .ifc \bitwidth,64 + bbnst r27, 2f + .endif + bbs r26, 3f /* skip write-back if it's the same value */ +2: { + .ifc \bitwidth,16 + sh r0, r24 + .else + sw r0, r24 + addi r23, r0, 4 + .endif + } + .ifc \bitwidth,64 + sw r23, r25 + .endif + mf +3: { + move r0, r22 + .ifc \bitwidth,64 + move r1, r23 + .else + move r1, zero + .endif + sw ATOMIC_LOCK_REG_NAME, zero + } + mtspr INTERRUPT_CRITICAL_SECTION, zero + jrp lr +4: { + move ATOMIC_LOCK_REG_NAME, r1 + mtspr INTERRUPT_CRITICAL_SECTION, r24 + } +#ifndef CONFIG_SMP + j 1b /* no atomic locks */ +#else + { + tns r21, ATOMIC_LOCK_REG_NAME + moveli r23, 2048 /* maximum backoff time in cycles */ + } + { + bzt r21, 1b /* branch if lock acquired */ + moveli r25, 32 /* starting backoff time in cycles */ + } +5: mtspr INTERRUPT_CRITICAL_SECTION, zero + mfspr r26, CYCLE_LOW /* get start point for this backoff */ +6: mfspr r22, CYCLE_LOW /* test to see if we've backed off enough */ + sub r22, r22, r26 + slt r22, r22, r25 + bbst r22, 6b + { + mtspr INTERRUPT_CRITICAL_SECTION, r24 + shli r25, r25, 1 /* double the backoff; retry the tns */ + } + { + tns r21, ATOMIC_LOCK_REG_NAME + slt r26, r23, r25 /* is the proposed backoff too big? */ + } + { + bzt r21, 1b /* branch if lock acquired */ + mvnz r25, r26, r23 + } + j 5b +#endif + STD_ENDPROC(__atomic\name) + .ifc \bitwidth,32 + .pushsection __ex_table,"a" + .word 1b, __atomic\name + .word 2b, __atomic\name + .word __atomic\name, __atomic_bad_address + .popsection + .endif + .endm + +atomic_op _cmpxchg, 32, "seq r26, r22, r2; { bbns r26, 3f; move r24, r3 }" +atomic_op _xchg, 32, "move r24, r2" +atomic_op _xchg_add, 32, "add r24, r22, r2" +atomic_op _xchg_add_unless, 32, \ + "sne r26, r22, r2; { bbns r26, 3f; add r24, r22, r3 }" +atomic_op _or, 32, "or r24, r22, r2" +atomic_op _andn, 32, "nor r2, r2, zero; and r24, r22, r2" +atomic_op _xor, 32, "xor r24, r22, r2" + +atomic_op 64_cmpxchg, 64, "{ seq r26, r22, r2; seq r27, r23, r3 }; \ + { bbns r26, 3f; move r24, r4 }; { bbns r27, 3f; move r25, r5 }" +atomic_op 64_xchg, 64, "{ move r24, r2; move r25, r3 }" +atomic_op 64_xchg_add, 64, "{ add r24, r22, r2; add r25, r23, r3 }; \ + slt_u r26, r24, r22; add r25, r25, r26" +atomic_op 64_xchg_add_unless, 64, \ + "{ sne r26, r22, r2; sne r27, r23, r3 }; \ + { bbns r26, 3f; add r24, r22, r4 }; \ + { bbns r27, 3f; add r25, r23, r5 }; \ + slt_u r26, r24, r22; add r25, r25, r26" + + jrp lr /* happy backtracer */ + +ENTRY(__end_atomic_asm_code) diff --git a/arch/tile/lib/checksum.c b/arch/tile/lib/checksum.c new file mode 100644 index 00000000000..e4bab5bd3f3 --- /dev/null +++ b/arch/tile/lib/checksum.c @@ -0,0 +1,102 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * Support code for the main lib/checksum.c. + */ + +#include <net/checksum.h> +#include <linux/module.h> + +static inline unsigned int longto16(unsigned long x) +{ + unsigned long ret; +#ifdef __tilegx__ + ret = __insn_v2sadu(x, 0); + ret = __insn_v2sadu(ret, 0); +#else + ret = __insn_sadh_u(x, 0); + ret = __insn_sadh_u(ret, 0); +#endif + return ret; +} + +__wsum do_csum(const unsigned char *buff, int len) +{ + int odd, count; + unsigned long result = 0; + + if (len <= 0) + goto out; + odd = 1 & (unsigned long) buff; + if (odd) { + result = (*buff << 8); + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(const unsigned short *)buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { +#ifdef __tilegx__ + if (4 & (unsigned long) buff) { + unsigned int w = *(const unsigned int *)buff; + result = __insn_v2sadau(result, w, 0); + count--; + len -= 4; + buff += 4; + } + count >>= 1; /* nr of 64-bit words.. */ +#endif + + /* + * This algorithm could wrap around for very + * large buffers, but those should be impossible. + */ + BUG_ON(count >= 65530); + + while (count) { + unsigned long w = *(const unsigned long *)buff; + count--; + buff += sizeof(w); +#ifdef __tilegx__ + result = __insn_v2sadau(result, w, 0); +#else + result = __insn_sadah_u(result, w, 0); +#endif + } +#ifdef __tilegx__ + if (len & 4) { + unsigned int w = *(const unsigned int *)buff; + result = __insn_v2sadau(result, w, 0); + buff += 4; + } +#endif + } + if (len & 2) { + result += *(const unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += *buff; + result = longto16(result); + if (odd) + result = swab16(result); +out: + return result; +} diff --git a/arch/tile/lib/cpumask.c b/arch/tile/lib/cpumask.c new file mode 100644 index 00000000000..af745b3b255 --- /dev/null +++ b/arch/tile/lib/cpumask.c @@ -0,0 +1,51 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/cpumask.h> +#include <linux/ctype.h> +#include <linux/errno.h> + +/* + * Allow cropping out bits beyond the end of the array. + * Move to "lib" directory if more clients want to use this routine. + */ +int bitmap_parselist_crop(const char *bp, unsigned long *maskp, int nmaskbits) +{ + unsigned a, b; + + bitmap_zero(maskp, nmaskbits); + do { + if (!isdigit(*bp)) + return -EINVAL; + a = simple_strtoul(bp, (char **)&bp, 10); + b = a; + if (*bp == '-') { + bp++; + if (!isdigit(*bp)) + return -EINVAL; + b = simple_strtoul(bp, (char **)&bp, 10); + } + if (!(a <= b)) + return -EINVAL; + if (b >= nmaskbits) + b = nmaskbits-1; + while (a <= b) { + set_bit(a, maskp); + a++; + } + if (*bp == ',') + bp++; + } while (*bp != '\0' && *bp != '\n'); + return 0; +} diff --git a/arch/tile/lib/delay.c b/arch/tile/lib/delay.c new file mode 100644 index 00000000000..5801b03c13e --- /dev/null +++ b/arch/tile/lib/delay.c @@ -0,0 +1,34 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/thread_info.h> +#include <asm/fixmap.h> +#include <hv/hypervisor.h> + +void __udelay(unsigned long usecs) +{ + hv_nanosleep(usecs * 1000); +} +EXPORT_SYMBOL(__udelay); + +void __ndelay(unsigned long nsecs) +{ + hv_nanosleep(nsecs); +} +EXPORT_SYMBOL(__ndelay); + +/* FIXME: should be declared in a header somewhere. */ +EXPORT_SYMBOL(__delay); diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c new file mode 100644 index 00000000000..af8e70e2a0c --- /dev/null +++ b/arch/tile/lib/exports.c @@ -0,0 +1,78 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Exports from assembler code and from libtile-cc. + */ + +#include <linux/module.h> + +/* arch/tile/lib/usercopy.S */ +#include <linux/uaccess.h> +EXPORT_SYMBOL(__get_user_1); +EXPORT_SYMBOL(__get_user_2); +EXPORT_SYMBOL(__get_user_4); +EXPORT_SYMBOL(__put_user_1); +EXPORT_SYMBOL(__put_user_2); +EXPORT_SYMBOL(__put_user_4); +EXPORT_SYMBOL(__put_user_8); +EXPORT_SYMBOL(strnlen_user_asm); +EXPORT_SYMBOL(strncpy_from_user_asm); +EXPORT_SYMBOL(clear_user_asm); + +/* arch/tile/kernel/entry.S */ +#include <linux/kernel.h> +#include <asm/processor.h> +EXPORT_SYMBOL(current_text_addr); +EXPORT_SYMBOL(dump_stack); + +/* arch/tile/lib/__memcpy.S */ +/* NOTE: on TILE64, these symbols appear in arch/tile/lib/memcpy_tile64.c */ +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(__copy_to_user_inatomic); +EXPORT_SYMBOL(__copy_from_user_inatomic); +EXPORT_SYMBOL(__copy_from_user_zeroing); + +/* hypervisor glue */ +#include <hv/hypervisor.h> +EXPORT_SYMBOL(hv_dev_open); +EXPORT_SYMBOL(hv_dev_pread); +EXPORT_SYMBOL(hv_dev_pwrite); +EXPORT_SYMBOL(hv_dev_close); + +/* -ltile-cc */ +uint32_t __udivsi3(uint32_t dividend, uint32_t divisor); +EXPORT_SYMBOL(__udivsi3); +int32_t __divsi3(int32_t dividend, int32_t divisor); +EXPORT_SYMBOL(__divsi3); +uint64_t __udivdi3(uint64_t dividend, uint64_t divisor); +EXPORT_SYMBOL(__udivdi3); +int64_t __divdi3(int64_t dividend, int64_t divisor); +EXPORT_SYMBOL(__divdi3); +uint32_t __umodsi3(uint32_t dividend, uint32_t divisor); +EXPORT_SYMBOL(__umodsi3); +int32_t __modsi3(int32_t dividend, int32_t divisor); +EXPORT_SYMBOL(__modsi3); +uint64_t __umoddi3(uint64_t dividend, uint64_t divisor); +EXPORT_SYMBOL(__umoddi3); +int64_t __moddi3(int64_t dividend, int64_t divisor); +EXPORT_SYMBOL(__moddi3); +#ifndef __tilegx__ +uint64_t __ll_mul(uint64_t n0, uint64_t n1); +EXPORT_SYMBOL(__ll_mul); +#endif +#ifndef __tilegx__ +int64_t __muldi3(int64_t, int64_t); +EXPORT_SYMBOL(__muldi3); +uint64_t __lshrdi3(uint64_t, unsigned int); +EXPORT_SYMBOL(__lshrdi3); +#endif diff --git a/arch/tile/lib/mb_incoherent.S b/arch/tile/lib/mb_incoherent.S new file mode 100644 index 00000000000..989ad7b68d5 --- /dev/null +++ b/arch/tile/lib/mb_incoherent.S @@ -0,0 +1,34 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * Assembly code for invoking the HV's fence_incoherent syscall. + */ + +#include <linux/linkage.h> +#include <hv/syscall_public.h> +#include <arch/abi.h> +#include <arch/chip.h> + +#if !CHIP_HAS_MF_WAITS_FOR_VICTIMS() + +/* + * Invoke the hypervisor's fence_incoherent syscall, which guarantees + * that all victims for cachelines homed on this tile have reached memory. + */ +STD_ENTRY(__mb_incoherent) + moveli TREG_SYSCALL_NR_NAME, HV_SYS_fence_incoherent + swint2 + jrp lr + STD_ENDPROC(__mb_incoherent) + +#endif diff --git a/arch/tile/lib/memchr_32.c b/arch/tile/lib/memchr_32.c new file mode 100644 index 00000000000..6235283b485 --- /dev/null +++ b/arch/tile/lib/memchr_32.c @@ -0,0 +1,68 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +void *memchr(const void *s, int c, size_t n) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + + /* Create four copies of the byte for which we are looking. */ + const uint32_t goal = 0x01010101 * (uint8_t) c; + + /* Read the first word, but munge it so that bytes before the array + * will not match goal. + * + * Note that this shift count expression works because we know + * shift counts are taken mod 32. + */ + const uint32_t before_mask = (1 << (s_int << 3)) - 1; + uint32_t v = (*p | before_mask) ^ (goal & before_mask); + + /* Compute the address of the last byte. */ + const char *const last_byte_ptr = (const char *)s + n - 1; + + /* Compute the address of the word containing the last byte. */ + const uint32_t *const last_word_ptr = + (const uint32_t *)((uintptr_t) last_byte_ptr & -4); + + uint32_t bits; + char *ret; + + if (__builtin_expect(n == 0, 0)) { + /* Don't dereference any memory if the array is empty. */ + return NULL; + } + + while ((bits = __insn_seqb(v, goal)) == 0) { + if (__builtin_expect(p == last_word_ptr, 0)) { + /* We already read the last word in the array, + * so give up. + */ + return NULL; + } + v = *++p; + } + + /* We found a match, but it might be in a byte past the end + * of the array. + */ + ret = ((char *)p) + (__insn_ctz(bits) >> 3); + return (ret <= last_byte_ptr) ? ret : NULL; +} +EXPORT_SYMBOL(memchr); diff --git a/arch/tile/lib/memcpy_32.S b/arch/tile/lib/memcpy_32.S new file mode 100644 index 00000000000..f92984bf60e --- /dev/null +++ b/arch/tile/lib/memcpy_32.S @@ -0,0 +1,628 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * + * This file shares the implementation of the userspace memcpy and + * the kernel's memcpy, copy_to_user and copy_from_user. + */ + +#include <arch/chip.h> + +#if CHIP_HAS_WH64() || defined(MEMCPY_TEST_WH64) +#define MEMCPY_USE_WH64 +#endif + + +#include <linux/linkage.h> + +/* On TILE64, we wrap these functions via arch/tile/lib/memcpy_tile64.c */ +#if !CHIP_HAS_COHERENT_LOCAL_CACHE() +#define memcpy __memcpy_asm +#define __copy_to_user_inatomic __copy_to_user_inatomic_asm +#define __copy_from_user_inatomic __copy_from_user_inatomic_asm +#define __copy_from_user_zeroing __copy_from_user_zeroing_asm +#endif + +#define IS_MEMCPY 0 +#define IS_COPY_FROM_USER 1 +#define IS_COPY_FROM_USER_ZEROING 2 +#define IS_COPY_TO_USER -1 + + .section .text.memcpy_common, "ax" + .align 64 + +/* Use this to preface each bundle that can cause an exception so + * the kernel can clean up properly. The special cleanup code should + * not use these, since it knows what it is doing. + */ +#define EX \ + .pushsection __ex_table, "a"; \ + .word 9f, memcpy_common_fixup; \ + .popsection; \ + 9 + + +/* __copy_from_user_inatomic takes the kernel target address in r0, + * the user source in r1, and the bytes to copy in r2. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + */ +ENTRY(__copy_from_user_inatomic) +.type __copy_from_user_inatomic, @function + FEEDBACK_ENTER_EXPLICIT(__copy_from_user_inatomic, \ + .text.memcpy_common, \ + .Lend_memcpy_common - __copy_from_user_inatomic) + { movei r29, IS_COPY_FROM_USER; j memcpy_common } + .size __copy_from_user_inatomic, . - __copy_from_user_inatomic + +/* __copy_from_user_zeroing is like __copy_from_user_inatomic, but + * any uncopiable bytes are zeroed in the target. + */ +ENTRY(__copy_from_user_zeroing) +.type __copy_from_user_zeroing, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_COPY_FROM_USER_ZEROING; j memcpy_common } + .size __copy_from_user_zeroing, . - __copy_from_user_zeroing + +/* __copy_to_user_inatomic takes the user target address in r0, + * the kernel source in r1, and the bytes to copy in r2. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + */ +ENTRY(__copy_to_user_inatomic) +.type __copy_to_user_inatomic, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_COPY_TO_USER; j memcpy_common } + .size __copy_to_user_inatomic, . - __copy_to_user_inatomic + +ENTRY(memcpy) +.type memcpy, @function + FEEDBACK_REENTER(__copy_from_user_inatomic) + { movei r29, IS_MEMCPY } + .size memcpy, . - memcpy + /* Fall through */ + + .type memcpy_common, @function +memcpy_common: + /* On entry, r29 holds one of the IS_* macro values from above. */ + + + /* r0 is the dest, r1 is the source, r2 is the size. */ + + /* Save aside original dest so we can return it at the end. */ + { sw sp, lr; move r23, r0; or r4, r0, r1 } + + /* Check for an empty size. */ + { bz r2, .Ldone; andi r4, r4, 3 } + + /* Save aside original values in case of a fault. */ + { move r24, r1; move r25, r2 } + move r27, lr + + /* Check for an unaligned source or dest. */ + { bnz r4, .Lcopy_unaligned_maybe_many; addli r4, r2, -256 } + +.Lcheck_aligned_copy_size: + /* If we are copying < 256 bytes, branch to simple case. */ + { blzt r4, .Lcopy_8_check; slti_u r8, r2, 8 } + + /* Copying >= 256 bytes, so jump to complex prefetching loop. */ + { andi r6, r1, 63; j .Lcopy_many } + +/* + * + * Aligned 4 byte at a time copy loop + * + */ + +.Lcopy_8_loop: + /* Copy two words at a time to hide load latency. */ +EX: { lw r3, r1; addi r1, r1, 4; slti_u r8, r2, 16 } +EX: { lw r4, r1; addi r1, r1, 4 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } +EX: { sw r0, r4; addi r0, r0, 4; addi r2, r2, -4 } +.Lcopy_8_check: + { bzt r8, .Lcopy_8_loop; slti_u r4, r2, 4 } + + /* Copy odd leftover word, if any. */ + { bnzt r4, .Lcheck_odd_stragglers } +EX: { lw r3, r1; addi r1, r1, 4 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } + +.Lcheck_odd_stragglers: + { bnz r2, .Lcopy_unaligned_few } + +.Ldone: + /* For memcpy return original dest address, else zero. */ + { mz r0, r29, r23; jrp lr } + + +/* + * + * Prefetching multiple cache line copy handler (for large transfers). + * + */ + + /* Copy words until r1 is cache-line-aligned. */ +.Lalign_loop: +EX: { lw r3, r1; addi r1, r1, 4 } + { andi r6, r1, 63 } +EX: { sw r0, r3; addi r0, r0, 4; addi r2, r2, -4 } +.Lcopy_many: + { bnzt r6, .Lalign_loop; addi r9, r0, 63 } + + { addi r3, r1, 60; andi r9, r9, -64 } + +#ifdef MEMCPY_USE_WH64 + /* No need to prefetch dst, we'll just do the wh64 + * right before we copy a line. + */ +#endif + +EX: { lw r5, r3; addi r3, r3, 64; movei r4, 1 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, .; move r27, lr } +EX: { lw r6, r3; addi r3, r3, 64 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, . } +EX: { lw r7, r3; addi r3, r3, 64 } +#ifndef MEMCPY_USE_WH64 + /* Prefetch the dest */ + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, . } + /* Use a real load to cause a TLB miss if necessary. We aren't using + * r28, so this should be fine. + */ +EX: { lw r28, r9; addi r9, r9, 64 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, . } + { prefetch r9; addi r9, r9, 64 } + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bnzt zero, . } + { prefetch r9; addi r9, r9, 64 } +#endif + /* Intentionally stall for a few cycles to leave L2 cache alone. */ + { bz zero, .Lbig_loop2 } + + /* On entry to this loop: + * - r0 points to the start of dst line 0 + * - r1 points to start of src line 0 + * - r2 >= (256 - 60), only the first time the loop trips. + * - r3 contains r1 + 128 + 60 [pointer to end of source line 2] + * This is our prefetch address. When we get near the end + * rather than prefetching off the end this is changed to point + * to some "safe" recently loaded address. + * - r5 contains *(r1 + 60) [i.e. last word of source line 0] + * - r6 contains *(r1 + 64 + 60) [i.e. last word of source line 1] + * - r9 contains ((r0 + 63) & -64) + * [start of next dst cache line.] + */ + +.Lbig_loop: + { jal .Lcopy_line2; add r15, r1, r2 } + +.Lbig_loop2: + /* Copy line 0, first stalling until r5 is ready. */ +EX: { move r12, r5; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r5, r3; addi r3, r3, 64 } + { jal .Lcopy_line } + + /* Copy line 1, first stalling until r6 is ready. */ +EX: { move r12, r6; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r6, r3; addi r3, r3, 64 } + { jal .Lcopy_line } + + /* Copy line 2, first stalling until r7 is ready. */ +EX: { move r12, r7; lw r16, r1 } + { bz r4, .Lcopy_8_check; slti_u r8, r2, 8 } + /* Prefetch several lines ahead. */ +EX: { lw r7, r3; addi r3, r3, 64 } + /* Use up a caches-busy cycle by jumping back to the top of the + * loop. Might as well get it out of the way now. + */ + { j .Lbig_loop } + + + /* On entry: + * - r0 points to the destination line. + * - r1 points to the source line. + * - r3 is the next prefetch address. + * - r9 holds the last address used for wh64. + * - r12 = WORD_15 + * - r16 = WORD_0. + * - r17 == r1 + 16. + * - r27 holds saved lr to restore. + * + * On exit: + * - r0 is incremented by 64. + * - r1 is incremented by 64, unless that would point to a word + * beyond the end of the source array, in which case it is redirected + * to point to an arbitrary word already in the cache. + * - r2 is decremented by 64. + * - r3 is unchanged, unless it points to a word beyond the + * end of the source array, in which case it is redirected + * to point to an arbitrary word already in the cache. + * Redirecting is OK since if we are that close to the end + * of the array we will not come back to this subroutine + * and use the contents of the prefetched address. + * - r4 is nonzero iff r2 >= 64. + * - r9 is incremented by 64, unless it points beyond the + * end of the last full destination cache line, in which + * case it is redirected to a "safe address" that can be + * clobbered (sp - 64) + * - lr contains the value in r27. + */ + +/* r26 unused */ + +.Lcopy_line: + /* TODO: when r3 goes past the end, we would like to redirect it + * to prefetch the last partial cache line (if any) just once, for the + * benefit of the final cleanup loop. But we don't want to + * prefetch that line more than once, or subsequent prefetches + * will go into the RTF. But then .Lbig_loop should unconditionally + * branch to top of loop to execute final prefetch, and its + * nop should become a conditional branch. + */ + + /* We need two non-memory cycles here to cover the resources + * used by the loads initiated by the caller. + */ + { add r15, r1, r2 } +.Lcopy_line2: + { slt_u r13, r3, r15; addi r17, r1, 16 } + + /* NOTE: this will stall for one cycle as L1 is busy. */ + + /* Fill second L1D line. */ +EX: { lw r17, r17; addi r1, r1, 48; mvz r3, r13, r1 } /* r17 = WORD_4 */ + +#ifdef MEMCPY_TEST_WH64 + /* Issue a fake wh64 that clobbers the destination words + * with random garbage, for testing. + */ + { movei r19, 64; crc32_32 r10, r2, r9 } +.Lwh64_test_loop: +EX: { sw r9, r10; addi r9, r9, 4; addi r19, r19, -4 } + { bnzt r19, .Lwh64_test_loop; crc32_32 r10, r10, r19 } +#elif CHIP_HAS_WH64() + /* Prepare destination line for writing. */ +EX: { wh64 r9; addi r9, r9, 64 } +#else + /* Prefetch dest line */ + { prefetch r9; addi r9, r9, 64 } +#endif + /* Load seven words that are L1D hits to cover wh64 L2 usage. */ + + /* Load the three remaining words from the last L1D line, which + * we know has already filled the L1D. + */ +EX: { lw r4, r1; addi r1, r1, 4; addi r20, r1, 16 } /* r4 = WORD_12 */ +EX: { lw r8, r1; addi r1, r1, 4; slt_u r13, r20, r15 }/* r8 = WORD_13 */ +EX: { lw r11, r1; addi r1, r1, -52; mvz r20, r13, r1 } /* r11 = WORD_14 */ + + /* Load the three remaining words from the first L1D line, first + * stalling until it has filled by "looking at" r16. + */ +EX: { lw r13, r1; addi r1, r1, 4; move zero, r16 } /* r13 = WORD_1 */ +EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_2 */ +EX: { lw r15, r1; addi r1, r1, 8; addi r10, r0, 60 } /* r15 = WORD_3 */ + + /* Load second word from the second L1D line, first + * stalling until it has filled by "looking at" r17. + */ +EX: { lw r19, r1; addi r1, r1, 4; move zero, r17 } /* r19 = WORD_5 */ + + /* Store last word to the destination line, potentially dirtying it + * for the first time, which keeps the L2 busy for two cycles. + */ +EX: { sw r10, r12 } /* store(WORD_15) */ + + /* Use two L1D hits to cover the sw L2 access above. */ +EX: { lw r10, r1; addi r1, r1, 4 } /* r10 = WORD_6 */ +EX: { lw r12, r1; addi r1, r1, 4 } /* r12 = WORD_7 */ + + /* Fill third L1D line. */ +EX: { lw r18, r1; addi r1, r1, 4 } /* r18 = WORD_8 */ + + /* Store first L1D line. */ +EX: { sw r0, r16; addi r0, r0, 4; add r16, r0, r2 } /* store(WORD_0) */ +EX: { sw r0, r13; addi r0, r0, 4; andi r16, r16, -64 } /* store(WORD_1) */ +EX: { sw r0, r14; addi r0, r0, 4; slt_u r16, r9, r16 } /* store(WORD_2) */ +#ifdef MEMCPY_USE_WH64 +EX: { sw r0, r15; addi r0, r0, 4; addi r13, sp, -64 } /* store(WORD_3) */ +#else + /* Back up the r9 to a cache line we are already storing to + * if it gets past the end of the dest vector. Strictly speaking, + * we don't need to back up to the start of a cache line, but it's free + * and tidy, so why not? + */ +EX: { sw r0, r15; addi r0, r0, 4; andi r13, r0, -64 } /* store(WORD_3) */ +#endif + /* Store second L1D line. */ +EX: { sw r0, r17; addi r0, r0, 4; mvz r9, r16, r13 }/* store(WORD_4) */ +EX: { sw r0, r19; addi r0, r0, 4 } /* store(WORD_5) */ +EX: { sw r0, r10; addi r0, r0, 4 } /* store(WORD_6) */ +EX: { sw r0, r12; addi r0, r0, 4 } /* store(WORD_7) */ + +EX: { lw r13, r1; addi r1, r1, 4; move zero, r18 } /* r13 = WORD_9 */ +EX: { lw r14, r1; addi r1, r1, 4 } /* r14 = WORD_10 */ +EX: { lw r15, r1; move r1, r20 } /* r15 = WORD_11 */ + + /* Store third L1D line. */ +EX: { sw r0, r18; addi r0, r0, 4 } /* store(WORD_8) */ +EX: { sw r0, r13; addi r0, r0, 4 } /* store(WORD_9) */ +EX: { sw r0, r14; addi r0, r0, 4 } /* store(WORD_10) */ +EX: { sw r0, r15; addi r0, r0, 4 } /* store(WORD_11) */ + + /* Store rest of fourth L1D line. */ +EX: { sw r0, r4; addi r0, r0, 4 } /* store(WORD_12) */ + { +EX: sw r0, r8 /* store(WORD_13) */ + addi r0, r0, 4 + /* Will r2 be > 64 after we subtract 64 below? */ + shri r4, r2, 7 + } + { +EX: sw r0, r11 /* store(WORD_14) */ + addi r0, r0, 8 + /* Record 64 bytes successfully copied. */ + addi r2, r2, -64 + } + + { jrp lr; move lr, r27 } + + /* Convey to the backtrace library that the stack frame is size + * zero, and the real return address is on the stack rather than + * in 'lr'. + */ + { info 8 } + + .align 64 +.Lcopy_unaligned_maybe_many: + /* Skip the setup overhead if we aren't copying many bytes. */ + { slti_u r8, r2, 20; sub r4, zero, r0 } + { bnzt r8, .Lcopy_unaligned_few; andi r4, r4, 3 } + { bz r4, .Ldest_is_word_aligned; add r18, r1, r2 } + +/* + * + * unaligned 4 byte at a time copy handler. + * + */ + + /* Copy single bytes until r0 == 0 mod 4, so we can store words. */ +.Lalign_dest_loop: +EX: { lb_u r3, r1; addi r1, r1, 1; addi r4, r4, -1 } +EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r4, .Lalign_dest_loop; andi r3, r1, 3 } + + /* If source and dest are now *both* aligned, do an aligned copy. */ + { bz r3, .Lcheck_aligned_copy_size; addli r4, r2, -256 } + +.Ldest_is_word_aligned: + +#if CHIP_HAS_DWORD_ALIGN() +EX: { andi r8, r0, 63; lwadd_na r6, r1, 4} + { slti_u r9, r2, 64; bz r8, .Ldest_is_L2_line_aligned } + + /* This copies unaligned words until either there are fewer + * than 4 bytes left to copy, or until the destination pointer + * is cache-aligned, whichever comes first. + * + * On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 4 + * - r6 is the next aligned word loaded. + */ +.Lcopy_unaligned_src_words: +EX: { lwadd_na r7, r1, 4; slti_u r8, r2, 4 + 4 } + /* stall */ + { dword_align r6, r7, r1; slti_u r9, r2, 64 + 4 } +EX: { swadd r0, r6, 4; addi r2, r2, -4 } + { bnz r8, .Lcleanup_unaligned_words; andi r8, r0, 63 } + { bnzt r8, .Lcopy_unaligned_src_words; move r6, r7 } + + /* On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 4 (# of bytes left to store). + * - r6 is the next aligned src word value. + * - r9 = (r2 < 64U). + * - r18 points one byte past the end of source memory. + */ +.Ldest_is_L2_line_aligned: + + { + /* Not a full cache line remains. */ + bnz r9, .Lcleanup_unaligned_words + move r7, r6 + } + + /* r2 >= 64 */ + + /* Kick off two prefetches, but don't go past the end. */ + { addi r3, r1, 63 - 4; addi r8, r1, 64 + 63 - 4 } + { prefetch r3; move r3, r8; slt_u r8, r8, r18 } + { mvz r3, r8, r1; addi r8, r3, 64 } + { prefetch r3; move r3, r8; slt_u r8, r8, r18 } + { mvz r3, r8, r1; movei r17, 0 } + +.Lcopy_unaligned_line: + /* Prefetch another line. */ + { prefetch r3; addi r15, r1, 60; addi r3, r3, 64 } + /* Fire off a load of the last word we are about to copy. */ +EX: { lw_na r15, r15; slt_u r8, r3, r18 } + +EX: { mvz r3, r8, r1; wh64 r0 } + + /* This loop runs twice. + * + * On entry: + * - r17 is even before the first iteration, and odd before + * the second. It is incremented inside the loop. Encountering + * an even value at the end of the loop makes it stop. + */ +.Lcopy_half_an_unaligned_line: +EX: { + /* Stall until the last byte is ready. In the steady state this + * guarantees all words to load below will be in the L2 cache, which + * avoids shunting the loads to the RTF. + */ + move zero, r15 + lwadd_na r7, r1, 16 + } +EX: { lwadd_na r11, r1, 12 } +EX: { lwadd_na r14, r1, -24 } +EX: { lwadd_na r8, r1, 4 } +EX: { lwadd_na r9, r1, 4 } +EX: { + lwadd_na r10, r1, 8 + /* r16 = (r2 < 64), after we subtract 32 from r2 below. */ + slti_u r16, r2, 64 + 32 + } +EX: { lwadd_na r12, r1, 4; addi r17, r17, 1 } +EX: { lwadd_na r13, r1, 8; dword_align r6, r7, r1 } +EX: { swadd r0, r6, 4; dword_align r7, r8, r1 } +EX: { swadd r0, r7, 4; dword_align r8, r9, r1 } +EX: { swadd r0, r8, 4; dword_align r9, r10, r1 } +EX: { swadd r0, r9, 4; dword_align r10, r11, r1 } +EX: { swadd r0, r10, 4; dword_align r11, r12, r1 } +EX: { swadd r0, r11, 4; dword_align r12, r13, r1 } +EX: { swadd r0, r12, 4; dword_align r13, r14, r1 } +EX: { swadd r0, r13, 4; addi r2, r2, -32 } + { move r6, r14; bbst r17, .Lcopy_half_an_unaligned_line } + + { bzt r16, .Lcopy_unaligned_line; move r7, r6 } + + /* On entry: + * - r0 is the next store address. + * - r1 points 4 bytes past the load address corresponding to r0. + * - r2 >= 0 (# of bytes left to store). + * - r7 is the next aligned src word value. + */ +.Lcleanup_unaligned_words: + /* Handle any trailing bytes. */ + { bz r2, .Lcopy_unaligned_done; slti_u r8, r2, 4 } + { bzt r8, .Lcopy_unaligned_src_words; move r6, r7 } + + /* Move r1 back to the point where it corresponds to r0. */ + { addi r1, r1, -4 } + +#else /* !CHIP_HAS_DWORD_ALIGN() */ + + /* Compute right/left shift counts and load initial source words. */ + { andi r5, r1, -4; andi r3, r1, 3 } +EX: { lw r6, r5; addi r5, r5, 4; shli r3, r3, 3 } +EX: { lw r7, r5; addi r5, r5, 4; sub r4, zero, r3 } + + /* Load and store one word at a time, using shifts and ORs + * to correct for the misaligned src. + */ +.Lcopy_unaligned_src_loop: + { shr r6, r6, r3; shl r8, r7, r4 } +EX: { lw r7, r5; or r8, r8, r6; move r6, r7 } +EX: { sw r0, r8; addi r0, r0, 4; addi r2, r2, -4 } + { addi r5, r5, 4; slti_u r8, r2, 8 } + { bzt r8, .Lcopy_unaligned_src_loop; addi r1, r1, 4 } + + { bz r2, .Lcopy_unaligned_done } +#endif /* !CHIP_HAS_DWORD_ALIGN() */ + + /* Fall through */ + +/* + * + * 1 byte at a time copy handler. + * + */ + +.Lcopy_unaligned_few: +EX: { lb_u r3, r1; addi r1, r1, 1 } +EX: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, .Lcopy_unaligned_few } + +.Lcopy_unaligned_done: + + /* For memcpy return original dest address, else zero. */ + { mz r0, r29, r23; jrp lr } + +.Lend_memcpy_common: + .size memcpy_common, .Lend_memcpy_common - memcpy_common + + .section .fixup,"ax" +memcpy_common_fixup: + .type memcpy_common_fixup, @function + + /* Skip any bytes we already successfully copied. + * r2 (num remaining) is correct, but r0 (dst) and r1 (src) + * may not be quite right because of unrolling and prefetching. + * So we need to recompute their values as the address just + * after the last byte we are sure was successfully loaded and + * then stored. + */ + + /* Determine how many bytes we successfully copied. */ + { sub r3, r25, r2 } + + /* Add this to the original r0 and r1 to get their new values. */ + { add r0, r23, r3; add r1, r24, r3 } + + { bzt r29, memcpy_fixup_loop } + { blzt r29, copy_to_user_fixup_loop } + +copy_from_user_fixup_loop: + /* Try copying the rest one byte at a time, expecting a load fault. */ +.Lcfu: { lb_u r3, r1; addi r1, r1, 1 } + { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, copy_from_user_fixup_loop } + +.Lcopy_from_user_fixup_zero_remainder: + { bbs r29, 2f } /* low bit set means IS_COPY_FROM_USER */ + /* byte-at-a-time loop faulted, so zero the rest. */ + { move r3, r2; bz r2, 2f /* should be impossible, but handle it. */ } +1: { sb r0, zero; addi r0, r0, 1; addi r3, r3, -1 } + { bnzt r3, 1b } +2: move lr, r27 + { move r0, r2; jrp lr } + +copy_to_user_fixup_loop: + /* Try copying the rest one byte at a time, expecting a store fault. */ + { lb_u r3, r1; addi r1, r1, 1 } +.Lctu: { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, copy_to_user_fixup_loop } +.Lcopy_to_user_fixup_done: + move lr, r27 + { move r0, r2; jrp lr } + +memcpy_fixup_loop: + /* Try copying the rest one byte at a time. We expect a disastrous + * fault to happen since we are in fixup code, but let it happen. + */ + { lb_u r3, r1; addi r1, r1, 1 } + { sb r0, r3; addi r0, r0, 1; addi r2, r2, -1 } + { bnzt r2, memcpy_fixup_loop } + /* This should be unreachable, we should have faulted again. + * But be paranoid and handle it in case some interrupt changed + * the TLB or something. + */ + move lr, r27 + { move r0, r23; jrp lr } + + .size memcpy_common_fixup, . - memcpy_common_fixup + + .section __ex_table,"a" + .word .Lcfu, .Lcopy_from_user_fixup_zero_remainder + .word .Lctu, .Lcopy_to_user_fixup_done diff --git a/arch/tile/lib/memcpy_tile64.c b/arch/tile/lib/memcpy_tile64.c new file mode 100644 index 00000000000..4f004734246 --- /dev/null +++ b/arch/tile/lib/memcpy_tile64.c @@ -0,0 +1,271 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/string.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/uaccess.h> +#include <asm/fixmap.h> +#include <asm/kmap_types.h> +#include <asm/tlbflush.h> +#include <hv/hypervisor.h> +#include <arch/chip.h> + + +#if !CHIP_HAS_COHERENT_LOCAL_CACHE() + +/* Defined in memcpy.S */ +extern unsigned long __memcpy_asm(void *to, const void *from, unsigned long n); +extern unsigned long __copy_to_user_inatomic_asm( + void __user *to, const void *from, unsigned long n); +extern unsigned long __copy_from_user_inatomic_asm( + void *to, const void __user *from, unsigned long n); +extern unsigned long __copy_from_user_zeroing_asm( + void *to, const void __user *from, unsigned long n); + +typedef unsigned long (*memcpy_t)(void *, const void *, unsigned long); + +/* Size above which to consider TLB games for performance */ +#define LARGE_COPY_CUTOFF 2048 + +/* Communicate to the simulator what we are trying to do. */ +#define sim_allow_multiple_caching(b) \ + __insn_mtspr(SPR_SIM_CONTROL, \ + SIM_CONTROL_ALLOW_MULTIPLE_CACHING | ((b) << _SIM_CONTROL_OPERATOR_BITS)) + +/* + * Copy memory by briefly enabling incoherent cacheline-at-a-time mode. + * + * We set up our own source and destination PTEs that we fully control. + * This is the only way to guarantee that we don't race with another + * thread that is modifying the PTE; we can't afford to try the + * copy_{to,from}_user() technique of catching the interrupt, since + * we must run with interrupts disabled to avoid the risk of some + * other code seeing the incoherent data in our cache. (Recall that + * our cache is indexed by PA, so even if the other code doesn't use + * our KM_MEMCPY virtual addresses, they'll still hit in cache using + * the normal VAs that aren't supposed to hit in cache.) + */ +static void memcpy_multicache(void *dest, const void *source, + pte_t dst_pte, pte_t src_pte, int len) +{ + int idx, i; + unsigned long flags, newsrc, newdst, endsrc; + pmd_t *pmdp; + pte_t *ptep; + int cpu = get_cpu(); + + /* + * Disable interrupts so that we don't recurse into memcpy() + * in an interrupt handler, nor accidentally reference + * the PA of the source from an interrupt routine. Also + * notify the simulator that we're playing games so we don't + * generate spurious coherency warnings. + */ + local_irq_save(flags); + sim_allow_multiple_caching(1); + + /* Set up the new dest mapping */ + idx = FIX_KMAP_BEGIN + (KM_TYPE_NR * cpu) + KM_MEMCPY0; + newdst = __fix_to_virt(idx) + ((unsigned long)dest & (PAGE_SIZE-1)); + pmdp = pmd_offset(pud_offset(pgd_offset_k(newdst), newdst), newdst); + ptep = pte_offset_kernel(pmdp, newdst); + if (pte_val(*ptep) != pte_val(dst_pte)) { + set_pte(ptep, dst_pte); + local_flush_tlb_page(NULL, newdst, PAGE_SIZE); + } + + /* Set up the new source mapping */ + idx += (KM_MEMCPY0 - KM_MEMCPY1); + src_pte = hv_pte_set_nc(src_pte); + src_pte = hv_pte_clear_writable(src_pte); /* be paranoid */ + newsrc = __fix_to_virt(idx) + ((unsigned long)source & (PAGE_SIZE-1)); + pmdp = pmd_offset(pud_offset(pgd_offset_k(newsrc), newsrc), newsrc); + ptep = pte_offset_kernel(pmdp, newsrc); + *ptep = src_pte; /* set_pte() would be confused by this */ + local_flush_tlb_page(NULL, newsrc, PAGE_SIZE); + + /* Actually move the data. */ + __memcpy_asm((void *)newdst, (const void *)newsrc, len); + + /* + * Remap the source as locally-cached and not OLOC'ed so that + * we can inval without also invaling the remote cpu's cache. + * This also avoids known errata with inv'ing cacheable oloc data. + */ + src_pte = hv_pte_set_mode(src_pte, HV_PTE_MODE_CACHE_NO_L3); + src_pte = hv_pte_set_writable(src_pte); /* need write access for inv */ + *ptep = src_pte; /* set_pte() would be confused by this */ + local_flush_tlb_page(NULL, newsrc, PAGE_SIZE); + + /* + * Do the actual invalidation, covering the full L2 cache line + * at the end since __memcpy_asm() is somewhat aggressive. + */ + __inv_buffer((void *)newsrc, len); + + /* + * We're done: notify the simulator that all is back to normal, + * and re-enable interrupts and pre-emption. + */ + sim_allow_multiple_caching(0); + local_irq_restore(flags); + put_cpu_no_resched(); +} + +/* + * Identify large copies from remotely-cached memory, and copy them + * via memcpy_multicache() if they look good, otherwise fall back + * to the particular kind of copying passed as the memcpy_t function. + */ +static unsigned long fast_copy(void *dest, const void *source, int len, + memcpy_t func) +{ + /* + * Check if it's big enough to bother with. We may end up doing a + * small copy via TLB manipulation if we're near a page boundary, + * but presumably we'll make it up when we hit the second page. + */ + while (len >= LARGE_COPY_CUTOFF) { + int copy_size, bytes_left_on_page; + pte_t *src_ptep, *dst_ptep; + pte_t src_pte, dst_pte; + struct page *src_page, *dst_page; + + /* Is the source page oloc'ed to a remote cpu? */ +retry_source: + src_ptep = virt_to_pte(current->mm, (unsigned long)source); + if (src_ptep == NULL) + break; + src_pte = *src_ptep; + if (!hv_pte_get_present(src_pte) || + !hv_pte_get_readable(src_pte) || + hv_pte_get_mode(src_pte) != HV_PTE_MODE_CACHE_TILE_L3) + break; + if (get_remote_cache_cpu(src_pte) == smp_processor_id()) + break; + src_page = pfn_to_page(hv_pte_get_pfn(src_pte)); + get_page(src_page); + if (pte_val(src_pte) != pte_val(*src_ptep)) { + put_page(src_page); + goto retry_source; + } + if (pte_huge(src_pte)) { + /* Adjust the PTE to correspond to a small page */ + int pfn = hv_pte_get_pfn(src_pte); + pfn += (((unsigned long)source & (HPAGE_SIZE-1)) + >> PAGE_SHIFT); + src_pte = pfn_pte(pfn, src_pte); + src_pte = pte_mksmall(src_pte); + } + + /* Is the destination page writable? */ +retry_dest: + dst_ptep = virt_to_pte(current->mm, (unsigned long)dest); + if (dst_ptep == NULL) { + put_page(src_page); + break; + } + dst_pte = *dst_ptep; + if (!hv_pte_get_present(dst_pte) || + !hv_pte_get_writable(dst_pte)) { + put_page(src_page); + break; + } + dst_page = pfn_to_page(hv_pte_get_pfn(dst_pte)); + if (dst_page == src_page) { + /* + * Source and dest are on the same page; this + * potentially exposes us to incoherence if any + * part of src and dest overlap on a cache line. + * Just give up rather than trying to be precise. + */ + put_page(src_page); + break; + } + get_page(dst_page); + if (pte_val(dst_pte) != pte_val(*dst_ptep)) { + put_page(dst_page); + goto retry_dest; + } + if (pte_huge(dst_pte)) { + /* Adjust the PTE to correspond to a small page */ + int pfn = hv_pte_get_pfn(dst_pte); + pfn += (((unsigned long)dest & (HPAGE_SIZE-1)) + >> PAGE_SHIFT); + dst_pte = pfn_pte(pfn, dst_pte); + dst_pte = pte_mksmall(dst_pte); + } + + /* All looks good: create a cachable PTE and copy from it */ + copy_size = len; + bytes_left_on_page = + PAGE_SIZE - (((int)source) & (PAGE_SIZE-1)); + if (copy_size > bytes_left_on_page) + copy_size = bytes_left_on_page; + bytes_left_on_page = + PAGE_SIZE - (((int)dest) & (PAGE_SIZE-1)); + if (copy_size > bytes_left_on_page) + copy_size = bytes_left_on_page; + memcpy_multicache(dest, source, dst_pte, src_pte, copy_size); + + /* Release the pages */ + put_page(dst_page); + put_page(src_page); + + /* Continue on the next page */ + dest += copy_size; + source += copy_size; + len -= copy_size; + } + + return func(dest, source, len); +} + +void *memcpy(void *to, const void *from, __kernel_size_t n) +{ + if (n < LARGE_COPY_CUTOFF) + return (void *)__memcpy_asm(to, from, n); + else + return (void *)fast_copy(to, from, n, __memcpy_asm); +} + +unsigned long __copy_to_user_inatomic(void __user *to, const void *from, + unsigned long n) +{ + if (n < LARGE_COPY_CUTOFF) + return __copy_to_user_inatomic_asm(to, from, n); + else + return fast_copy(to, from, n, __copy_to_user_inatomic_asm); +} + +unsigned long __copy_from_user_inatomic(void *to, const void __user *from, + unsigned long n) +{ + if (n < LARGE_COPY_CUTOFF) + return __copy_from_user_inatomic_asm(to, from, n); + else + return fast_copy(to, from, n, __copy_from_user_inatomic_asm); +} + +unsigned long __copy_from_user_zeroing(void *to, const void __user *from, + unsigned long n) +{ + if (n < LARGE_COPY_CUTOFF) + return __copy_from_user_zeroing_asm(to, from, n); + else + return fast_copy(to, from, n, __copy_from_user_zeroing_asm); +} + +#endif /* !CHIP_HAS_COHERENT_LOCAL_CACHE() */ diff --git a/arch/tile/lib/memmove_32.c b/arch/tile/lib/memmove_32.c new file mode 100644 index 00000000000..f09d8c4523e --- /dev/null +++ b/arch/tile/lib/memmove_32.c @@ -0,0 +1,63 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +void *memmove(void *dest, const void *src, size_t n) +{ + if ((const char *)src >= (char *)dest + n + || (char *)dest >= (const char *)src + n) { + /* We found no overlap, so let memcpy do all the heavy + * lifting (prefetching, etc.) + */ + return memcpy(dest, src, n); + } + + if (n != 0) { + const uint8_t *in; + uint8_t x; + uint8_t *out; + int stride; + + if (src < dest) { + /* copy backwards */ + in = (const uint8_t *)src + n - 1; + out = (uint8_t *)dest + n - 1; + stride = -1; + } else { + /* copy forwards */ + in = (const uint8_t *)src; + out = (uint8_t *)dest; + stride = 1; + } + + /* Manually software-pipeline this loop. */ + x = *in; + in += stride; + + while (--n != 0) { + *out = x; + out += stride; + x = *in; + in += stride; + } + + *out = x; + } + + return dest; +} +EXPORT_SYMBOL(memmove); diff --git a/arch/tile/lib/memset_32.c b/arch/tile/lib/memset_32.c new file mode 100644 index 00000000000..8593bc82398 --- /dev/null +++ b/arch/tile/lib/memset_32.c @@ -0,0 +1,274 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <arch/chip.h> + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + + +void *memset(void *s, int c, size_t n) +{ + uint32_t *out32; + int n32; + uint32_t v16, v32; + uint8_t *out8 = s; +#if !CHIP_HAS_WH64() + int ahead32; +#else + int to_align32; +#endif + + /* Experimentation shows that a trivial tight loop is a win up until + * around a size of 20, where writing a word at a time starts to win. + */ +#define BYTE_CUTOFF 20 + +#if BYTE_CUTOFF < 3 + /* This must be at least at least this big, or some code later + * on doesn't work. + */ +#error "BYTE_CUTOFF is too small" +#endif + + if (n < BYTE_CUTOFF) { + /* Strangely, this turns out to be the tightest way to + * write this loop. + */ + if (n != 0) { + do { + /* Strangely, combining these into one line + * performs worse. + */ + *out8 = c; + out8++; + } while (--n != 0); + } + + return s; + } + +#if !CHIP_HAS_WH64() + /* Use a spare issue slot to start prefetching the first cache + * line early. This instruction is free as the store can be buried + * in otherwise idle issue slots doing ALU ops. + */ + __insn_prefetch(out8); + + /* We prefetch the end so that a short memset that spans two cache + * lines gets some prefetching benefit. Again we believe this is free + * to issue. + */ + __insn_prefetch(&out8[n - 1]); +#endif /* !CHIP_HAS_WH64() */ + + + /* Align 'out8'. We know n >= 3 so this won't write past the end. */ + while (((uintptr_t) out8 & 3) != 0) { + *out8++ = c; + --n; + } + + /* Align 'n'. */ + while (n & 3) + out8[--n] = c; + + out32 = (uint32_t *) out8; + n32 = n >> 2; + + /* Tile input byte out to 32 bits. */ + v16 = __insn_intlb(c, c); + v32 = __insn_intlh(v16, v16); + + /* This must be at least 8 or the following loop doesn't work. */ +#define CACHE_LINE_SIZE_IN_WORDS (CHIP_L2_LINE_SIZE() / 4) + +#if !CHIP_HAS_WH64() + + ahead32 = CACHE_LINE_SIZE_IN_WORDS; + + /* We already prefetched the first and last cache lines, so + * we only need to do more prefetching if we are storing + * to more than two cache lines. + */ + if (n32 > CACHE_LINE_SIZE_IN_WORDS * 2) { + int i; + + /* Prefetch the next several cache lines. + * This is the setup code for the software-pipelined + * loop below. + */ +#define MAX_PREFETCH 5 + ahead32 = n32 & -CACHE_LINE_SIZE_IN_WORDS; + if (ahead32 > MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS) + ahead32 = MAX_PREFETCH * CACHE_LINE_SIZE_IN_WORDS; + + for (i = CACHE_LINE_SIZE_IN_WORDS; + i < ahead32; i += CACHE_LINE_SIZE_IN_WORDS) + __insn_prefetch(&out32[i]); + } + + if (n32 > ahead32) { + while (1) { + int j; + + /* Prefetch by reading one word several cache lines + * ahead. Since loads are non-blocking this will + * cause the full cache line to be read while we are + * finishing earlier cache lines. Using a store + * here causes microarchitectural performance + * problems where a victimizing store miss goes to + * the head of the retry FIFO and locks the pipe for + * a few cycles. So a few subsequent stores in this + * loop go into the retry FIFO, and then later + * stores see other stores to the same cache line + * are already in the retry FIFO and themselves go + * into the retry FIFO, filling it up and grinding + * to a halt waiting for the original miss to be + * satisfied. + */ + __insn_prefetch(&out32[ahead32]); + +#if 1 +#if CACHE_LINE_SIZE_IN_WORDS % 4 != 0 +#error "Unhandled CACHE_LINE_SIZE_IN_WORDS" +#endif + + n32 -= CACHE_LINE_SIZE_IN_WORDS; + + /* Save icache space by only partially unrolling + * this loop. + */ + for (j = CACHE_LINE_SIZE_IN_WORDS / 4; j > 0; j--) { + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + } +#else + /* Unfortunately, due to a code generator flaw this + * allocates a separate register for each of these + * stores, which requires a large number of spills, + * which makes this procedure enormously bigger + * (something like 70%) + */ + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + n32 -= 16; +#endif + + /* To save compiled code size, reuse this loop even + * when we run out of prefetching to do by dropping + * ahead32 down. + */ + if (n32 <= ahead32) { + /* Not even a full cache line left, + * so stop now. + */ + if (n32 < CACHE_LINE_SIZE_IN_WORDS) + break; + + /* Choose a small enough value that we don't + * prefetch past the end. There's no sense + * in touching cache lines we don't have to. + */ + ahead32 = CACHE_LINE_SIZE_IN_WORDS - 1; + } + } + } + +#else /* CHIP_HAS_WH64() */ + + /* Determine how many words we need to emit before the 'out32' + * pointer becomes aligned modulo the cache line size. + */ + to_align32 = + (-((uintptr_t)out32 >> 2)) & (CACHE_LINE_SIZE_IN_WORDS - 1); + + /* Only bother aligning and using wh64 if there is at least + * one full cache line to process. This check also prevents + * overrunning the end of the buffer with alignment words. + */ + if (to_align32 <= n32 - CACHE_LINE_SIZE_IN_WORDS) { + int lines_left; + + /* Align out32 mod the cache line size so we can use wh64. */ + n32 -= to_align32; + for (; to_align32 != 0; to_align32--) { + *out32 = v32; + out32++; + } + + /* Use unsigned divide to turn this into a right shift. */ + lines_left = (unsigned)n32 / CACHE_LINE_SIZE_IN_WORDS; + + do { + /* Only wh64 a few lines at a time, so we don't + * exceed the maximum number of victim lines. + */ + int x = ((lines_left < CHIP_MAX_OUTSTANDING_VICTIMS()) + ? lines_left + : CHIP_MAX_OUTSTANDING_VICTIMS()); + uint32_t *wh = out32; + int i = x; + int j; + + lines_left -= x; + + do { + __insn_wh64(wh); + wh += CACHE_LINE_SIZE_IN_WORDS; + } while (--i); + + for (j = x * (CACHE_LINE_SIZE_IN_WORDS / 4); j != 0; j--) { + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + *out32++ = v32; + } + } while (lines_left != 0); + + /* We processed all full lines above, so only this many + * words remain to be processed. + */ + n32 &= CACHE_LINE_SIZE_IN_WORDS - 1; + } + +#endif /* CHIP_HAS_WH64() */ + + /* Now handle any leftover values. */ + if (n32 != 0) { + do { + *out32 = v32; + out32++; + } while (--n32 != 0); + } + + return s; +} +EXPORT_SYMBOL(memset); diff --git a/arch/tile/lib/spinlock_32.c b/arch/tile/lib/spinlock_32.c new file mode 100644 index 00000000000..485e24d62c6 --- /dev/null +++ b/arch/tile/lib/spinlock_32.c @@ -0,0 +1,221 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <asm/processor.h> + +#include "spinlock_common.h" + +void arch_spin_lock(arch_spinlock_t *lock) +{ + int my_ticket; + int iterations = 0; + int delta; + + while ((my_ticket = __insn_tns((void *)&lock->next_ticket)) & 1) + delay_backoff(iterations++); + + /* Increment the next ticket number, implicitly releasing tns lock. */ + lock->next_ticket = my_ticket + TICKET_QUANTUM; + + /* Wait until it's our turn. */ + while ((delta = my_ticket - lock->current_ticket) != 0) + relax((128 / CYCLES_PER_RELAX_LOOP) * delta); +} +EXPORT_SYMBOL(arch_spin_lock); + +int arch_spin_trylock(arch_spinlock_t *lock) +{ + /* + * Grab a ticket; no need to retry if it's busy, we'll just + * treat that the same as "locked", since someone else + * will lock it momentarily anyway. + */ + int my_ticket = __insn_tns((void *)&lock->next_ticket); + + if (my_ticket == lock->current_ticket) { + /* Not currently locked, so lock it by keeping this ticket. */ + lock->next_ticket = my_ticket + TICKET_QUANTUM; + /* Success! */ + return 1; + } + + if (!(my_ticket & 1)) { + /* Release next_ticket. */ + lock->next_ticket = my_ticket; + } + + return 0; +} +EXPORT_SYMBOL(arch_spin_trylock); + +void arch_spin_unlock_wait(arch_spinlock_t *lock) +{ + u32 iterations = 0; + while (arch_spin_is_locked(lock)) + delay_backoff(iterations++); +} +EXPORT_SYMBOL(arch_spin_unlock_wait); + +/* + * The low byte is always reserved to be the marker for a "tns" operation + * since the low bit is set to "1" by a tns. The next seven bits are + * zeroes. The next byte holds the "next" writer value, i.e. the ticket + * available for the next task that wants to write. The third byte holds + * the current writer value, i.e. the writer who holds the current ticket. + * If current == next == 0, there are no interested writers. + */ +#define WR_NEXT_SHIFT _WR_NEXT_SHIFT +#define WR_CURR_SHIFT _WR_CURR_SHIFT +#define WR_WIDTH _WR_WIDTH +#define WR_MASK ((1 << WR_WIDTH) - 1) + +/* + * The last eight bits hold the active reader count. This has to be + * zero before a writer can start to write. + */ +#define RD_COUNT_SHIFT _RD_COUNT_SHIFT +#define RD_COUNT_WIDTH _RD_COUNT_WIDTH +#define RD_COUNT_MASK ((1 << RD_COUNT_WIDTH) - 1) + + +/* Lock the word, spinning until there are no tns-ers. */ +static inline u32 get_rwlock(arch_rwlock_t *rwlock) +{ + u32 iterations = 0; + for (;;) { + u32 val = __insn_tns((int *)&rwlock->lock); + if (unlikely(val & 1)) { + delay_backoff(iterations++); + continue; + } + return val; + } +} + +int arch_read_trylock_slow(arch_rwlock_t *rwlock) +{ + u32 val = get_rwlock(rwlock); + int locked = (val << RD_COUNT_WIDTH) == 0; + rwlock->lock = val + (locked << RD_COUNT_SHIFT); + return locked; +} +EXPORT_SYMBOL(arch_read_trylock_slow); + +void arch_read_unlock_slow(arch_rwlock_t *rwlock) +{ + u32 val = get_rwlock(rwlock); + rwlock->lock = val - (1 << RD_COUNT_SHIFT); +} +EXPORT_SYMBOL(arch_read_unlock_slow); + +void arch_write_unlock_slow(arch_rwlock_t *rwlock, u32 val) +{ + u32 eq, mask = 1 << WR_CURR_SHIFT; + while (unlikely(val & 1)) { + /* Limited backoff since we are the highest-priority task. */ + relax(4); + val = __insn_tns((int *)&rwlock->lock); + } + val = __insn_addb(val, mask); + eq = __insn_seqb(val, val << (WR_CURR_SHIFT - WR_NEXT_SHIFT)); + val = __insn_mz(eq & mask, val); + rwlock->lock = val; +} +EXPORT_SYMBOL(arch_write_unlock_slow); + +/* + * We spin until everything but the reader bits (which are in the high + * part of the word) are zero, i.e. no active or waiting writers, no tns. + * + * ISSUE: This approach can permanently starve readers. A reader who sees + * a writer could instead take a ticket lock (just like a writer would), + * and atomically enter read mode (with 1 reader) when it gets the ticket. + * This way both readers and writers will always make forward progress + * in a finite time. + */ +void arch_read_lock_slow(arch_rwlock_t *rwlock, u32 val) +{ + u32 iterations = 0; + do { + if (!(val & 1)) + rwlock->lock = val; + delay_backoff(iterations++); + val = __insn_tns((int *)&rwlock->lock); + } while ((val << RD_COUNT_WIDTH) != 0); + rwlock->lock = val + (1 << RD_COUNT_SHIFT); +} +EXPORT_SYMBOL(arch_read_lock_slow); + +void arch_write_lock_slow(arch_rwlock_t *rwlock, u32 val) +{ + /* + * The trailing underscore on this variable (and curr_ below) + * reminds us that the high bits are garbage; we mask them out + * when we compare them. + */ + u32 my_ticket_; + + /* Take out the next ticket; this will also stop would-be readers. */ + if (val & 1) + val = get_rwlock(rwlock); + rwlock->lock = __insn_addb(val, 1 << WR_NEXT_SHIFT); + + /* Extract my ticket value from the original word. */ + my_ticket_ = val >> WR_NEXT_SHIFT; + + /* + * Wait until the "current" field matches our ticket, and + * there are no remaining readers. + */ + for (;;) { + u32 curr_ = val >> WR_CURR_SHIFT; + u32 readers = val >> RD_COUNT_SHIFT; + u32 delta = ((my_ticket_ - curr_) & WR_MASK) + !!readers; + if (likely(delta == 0)) + break; + + /* Delay based on how many lock-holders are still out there. */ + relax((256 / CYCLES_PER_RELAX_LOOP) * delta); + + /* + * Get a non-tns value to check; we don't need to tns + * it ourselves. Since we're not tns'ing, we retry + * more rapidly to get a valid value. + */ + while ((val = rwlock->lock) & 1) + relax(4); + } +} +EXPORT_SYMBOL(arch_write_lock_slow); + +int __tns_atomic_acquire(atomic_t *lock) +{ + int ret; + u32 iterations = 0; + + BUG_ON(__insn_mfspr(SPR_INTERRUPT_CRITICAL_SECTION)); + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 1); + + while ((ret = __insn_tns((void *)&lock->counter)) == 1) + delay_backoff(iterations++); + return ret; +} + +void __tns_atomic_release(atomic_t *p, int v) +{ + p->counter = v; + __insn_mtspr(SPR_INTERRUPT_CRITICAL_SECTION, 0); +} diff --git a/arch/tile/lib/spinlock_common.h b/arch/tile/lib/spinlock_common.h new file mode 100644 index 00000000000..8dffebde663 --- /dev/null +++ b/arch/tile/lib/spinlock_common.h @@ -0,0 +1,64 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + * This file is included into spinlock_32.c or _64.c. + */ + +/* + * The mfspr in __spinlock_relax() is 5 or 6 cycles plus 2 for loop + * overhead. + */ +#ifdef __tilegx__ +#define CYCLES_PER_RELAX_LOOP 7 +#else +#define CYCLES_PER_RELAX_LOOP 8 +#endif + +/* + * Idle the core for CYCLES_PER_RELAX_LOOP * iterations cycles. + */ +static inline void +relax(int iterations) +{ + for (/*above*/; iterations > 0; iterations--) + __insn_mfspr(SPR_PASS); + barrier(); +} + +/* Perform bounded exponential backoff.*/ +void delay_backoff(int iterations) +{ + u32 exponent, loops; + + /* + * 2^exponent is how many times we go around the loop, + * which takes 8 cycles. We want to start with a 16- to 31-cycle + * loop, so we need to go around minimum 2 = 2^1 times, so we + * bias the original value up by 1. + */ + exponent = iterations + 1; + + /* + * Don't allow exponent to exceed 7, so we have 128 loops, + * or 1,024 (to 2,047) cycles, as our maximum. + */ + if (exponent > 8) + exponent = 8; + + loops = 1 << exponent; + + /* Add a randomness factor so two cpus never get in lock step. */ + loops += __insn_crc32_32(stack_pointer, get_cycles_low()) & + (loops - 1); + + relax(1 << exponent); +} diff --git a/arch/tile/lib/strchr_32.c b/arch/tile/lib/strchr_32.c new file mode 100644 index 00000000000..c94e6f7ae7b --- /dev/null +++ b/arch/tile/lib/strchr_32.c @@ -0,0 +1,66 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +#undef strchr + +char *strchr(const char *s, int c) +{ + int z, g; + + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + + /* Create four copies of the byte for which we are looking. */ + const uint32_t goal = 0x01010101 * (uint8_t) c; + + /* Read the first aligned word, but force bytes before the string to + * match neither zero nor goal (we make sure the high bit of each + * byte is 1, and the low 7 bits are all the opposite of the goal + * byte). + * + * Note that this shift count expression works because we know shift + * counts are taken mod 32. + */ + const uint32_t before_mask = (1 << (s_int << 3)) - 1; + uint32_t v = (*p | before_mask) ^ (goal & __insn_shrib(before_mask, 1)); + + uint32_t zero_matches, goal_matches; + while (1) { + /* Look for a terminating '\0'. */ + zero_matches = __insn_seqb(v, 0); + + /* Look for the goal byte. */ + goal_matches = __insn_seqb(v, goal); + + if (__builtin_expect(zero_matches | goal_matches, 0)) + break; + + v = *++p; + } + + z = __insn_ctz(zero_matches); + g = __insn_ctz(goal_matches); + + /* If we found c before '\0' we got a match. Note that if c == '\0' + * then g == z, and we correctly return the address of the '\0' + * rather than NULL. + */ + return (g <= z) ? ((char *)p) + (g >> 3) : NULL; +} +EXPORT_SYMBOL(strchr); diff --git a/arch/tile/lib/strlen_32.c b/arch/tile/lib/strlen_32.c new file mode 100644 index 00000000000..f26f88e11e4 --- /dev/null +++ b/arch/tile/lib/strlen_32.c @@ -0,0 +1,36 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/types.h> +#include <linux/string.h> +#include <linux/module.h> + +size_t strlen(const char *s) +{ + /* Get an aligned pointer. */ + const uintptr_t s_int = (uintptr_t) s; + const uint32_t *p = (const uint32_t *)(s_int & -4); + + /* Read the first word, but force bytes before the string to be nonzero. + * This expression works because we know shift counts are taken mod 32. + */ + uint32_t v = *p | ((1 << (s_int << 3)) - 1); + + uint32_t bits; + while ((bits = __insn_seqb(v, 0)) == 0) + v = *++p; + + return ((const char *)p) + (__insn_ctz(bits) >> 3) - s; +} +EXPORT_SYMBOL(strlen); diff --git a/arch/tile/lib/uaccess.c b/arch/tile/lib/uaccess.c new file mode 100644 index 00000000000..9ae182568b7 --- /dev/null +++ b/arch/tile/lib/uaccess.c @@ -0,0 +1,31 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/uaccess.h> +#include <linux/module.h> + +int __range_ok(unsigned long addr, unsigned long size) +{ + unsigned long limit = current_thread_info()->addr_limit.seg; + __chk_user_ptr(addr); + return !((addr < limit && size <= limit - addr) || + is_arch_mappable_range(addr, size)); +} +EXPORT_SYMBOL(__range_ok); + +void copy_from_user_overflow(void) +{ + WARN(1, "Buffer overflow detected!\n"); +} +EXPORT_SYMBOL(copy_from_user_overflow); diff --git a/arch/tile/lib/usercopy_32.S b/arch/tile/lib/usercopy_32.S new file mode 100644 index 00000000000..979f76d8374 --- /dev/null +++ b/arch/tile/lib/usercopy_32.S @@ -0,0 +1,223 @@ +/* + * Copyright 2010 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/cache.h> +#include <arch/chip.h> + +/* Access user memory, but use MMU to avoid propagating kernel exceptions. */ + + .pushsection .fixup,"ax" + +get_user_fault: + { move r0, zero; move r1, zero } + { movei r2, -EFAULT; jrp lr } + ENDPROC(get_user_fault) + +put_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(put_user_fault) + + .popsection + +/* + * __get_user_N functions take a pointer in r0, and return 0 in r2 + * on success, with the value in r0; or else -EFAULT in r2. + */ +#define __get_user_N(bytes, LOAD) \ + STD_ENTRY(__get_user_##bytes); \ +1: { LOAD r0, r0; move r1, zero; move r2, zero }; \ + jrp lr; \ + STD_ENDPROC(__get_user_##bytes); \ + .pushsection __ex_table,"a"; \ + .word 1b, get_user_fault; \ + .popsection + +__get_user_N(1, lb_u) +__get_user_N(2, lh_u) +__get_user_N(4, lw) + +/* + * __get_user_8 takes a pointer in r0, and returns 0 in r2 + * on success, with the value in r0/r1; or else -EFAULT in r2. + */ + STD_ENTRY(__get_user_8); +1: { lw r0, r0; addi r1, r0, 4 }; +2: { lw r1, r1; move r2, zero }; + jrp lr; + STD_ENDPROC(__get_user_8); + .pushsection __ex_table,"a"; + .word 1b, get_user_fault; + .word 2b, get_user_fault; + .popsection + +/* + * __put_user_N functions take a value in r0 and a pointer in r1, + * and return 0 in r0 on success or -EFAULT on failure. + */ +#define __put_user_N(bytes, STORE) \ + STD_ENTRY(__put_user_##bytes); \ +1: { STORE r1, r0; move r0, zero }; \ + jrp lr; \ + STD_ENDPROC(__put_user_##bytes); \ + .pushsection __ex_table,"a"; \ + .word 1b, put_user_fault; \ + .popsection + +__put_user_N(1, sb) +__put_user_N(2, sh) +__put_user_N(4, sw) + +/* + * __put_user_8 takes a value in r0/r1 and a pointer in r2, + * and returns 0 in r0 on success or -EFAULT on failure. + */ +STD_ENTRY(__put_user_8) +1: { sw r2, r0; addi r2, r2, 4 } +2: { sw r2, r1; move r0, zero } + jrp lr + STD_ENDPROC(__put_user_8) + .pushsection __ex_table,"a" + .word 1b, put_user_fault + .word 2b, put_user_fault + .popsection + + +/* + * strnlen_user_asm takes the pointer in r0, and the length bound in r1. + * It returns the length, including the terminating NUL, or zero on exception. + * If length is greater than the bound, returns one plus the bound. + */ +STD_ENTRY(strnlen_user_asm) + { bz r1, 2f; addi r3, r0, -1 } /* bias down to include NUL */ +1: { lb_u r4, r0; addi r1, r1, -1 } + bz r4, 2f + { bnzt r1, 1b; addi r0, r0, 1 } +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strnlen_user_asm) + .pushsection .fixup,"ax" +strnlen_user_fault: + { move r0, zero; jrp lr } + ENDPROC(strnlen_user_fault) + .section __ex_table,"a" + .word 1b, strnlen_user_fault + .popsection + +/* + * strncpy_from_user_asm takes the kernel target pointer in r0, + * the userspace source pointer in r1, and the length bound (including + * the trailing NUL) in r2. On success, it returns the string length + * (not including the trailing NUL), or -EFAULT on failure. + */ +STD_ENTRY(strncpy_from_user_asm) + { bz r2, 2f; move r3, r0 } +1: { lb_u r4, r1; addi r1, r1, 1; addi r2, r2, -1 } + { sb r0, r4; addi r0, r0, 1 } + bz r2, 2f + bnzt r4, 1b + addi r0, r0, -1 /* don't count the trailing NUL */ +2: { sub r0, r0, r3; jrp lr } + STD_ENDPROC(strncpy_from_user_asm) + .pushsection .fixup,"ax" +strncpy_from_user_fault: + { movei r0, -EFAULT; jrp lr } + ENDPROC(strncpy_from_user_fault) + .section __ex_table,"a" + .word 1b, strncpy_from_user_fault + .popsection + +/* + * clear_user_asm takes the user target address in r0 and the + * number of bytes to zero in r1. + * It returns the number of uncopiable bytes (hopefully zero) in r0. + * Note that we don't use a separate .fixup section here since we fall + * through into the "fixup" code as the last straight-line bundle anyway. + */ +STD_ENTRY(clear_user_asm) + { bz r1, 2f; or r2, r0, r1 } + andi r2, r2, 3 + bzt r2, .Lclear_aligned_user_asm +1: { sb r0, zero; addi r0, r0, 1; addi r1, r1, -1 } + bnzt r1, 1b +2: { move r0, r1; jrp lr } + .pushsection __ex_table,"a" + .word 1b, 2b + .popsection + +.Lclear_aligned_user_asm: +1: { sw r0, zero; addi r0, r0, 4; addi r1, r1, -4 } + bnzt r1, 1b +2: { move r0, r1; jrp lr } + STD_ENDPROC(clear_user_asm) + .pushsection __ex_table,"a" + .word 1b, 2b + .popsection + +/* + * flush_user_asm takes the user target address in r0 and the + * number of bytes to flush in r1. + * It returns the number of unflushable bytes (hopefully zero) in r0. + */ +STD_ENTRY(flush_user_asm) + bz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { flush r0; addi r1, r1, -CHIP_FLUSH_STRIDE() } + { addi r0, r0, CHIP_FLUSH_STRIDE(); bnzt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(flush_user_asm) + .pushsection __ex_table,"a" + .word 1b, 2b + .popsection + +/* + * inv_user_asm takes the user target address in r0 and the + * number of bytes to invalidate in r1. + * It returns the number of not inv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(inv_user_asm) + bz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { inv r0; addi r1, r1, -CHIP_INV_STRIDE() } + { addi r0, r0, CHIP_INV_STRIDE(); bnzt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(inv_user_asm) + .pushsection __ex_table,"a" + .word 1b, 2b + .popsection + +/* + * finv_user_asm takes the user target address in r0 and the + * number of bytes to flush-invalidate in r1. + * It returns the number of not finv'able bytes (hopefully zero) in r0. + */ +STD_ENTRY(finv_user_asm) + bz r1, 2f + { movei r2, L2_CACHE_BYTES; add r1, r0, r1 } + { sub r2, zero, r2; addi r1, r1, L2_CACHE_BYTES-1 } + { and r0, r0, r2; and r1, r1, r2 } + { sub r1, r1, r0 } +1: { finv r0; addi r1, r1, -CHIP_FINV_STRIDE() } + { addi r0, r0, CHIP_FINV_STRIDE(); bnzt r1, 1b } +2: { move r0, r1; jrp lr } + STD_ENDPROC(finv_user_asm) + .pushsection __ex_table,"a" + .word 1b, 2b + .popsection |