diff options
Diffstat (limited to 'arch/x86/kernel/cpu/mcheck/mce_intel_64.c')
| -rw-r--r-- | arch/x86/kernel/cpu/mcheck/mce_intel_64.c | 214 |
1 files changed, 210 insertions, 4 deletions
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index f44c3662436..aaa7d973093 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -1,17 +1,21 @@ /* * Intel specific MCE features. * Copyright 2004 Zwane Mwaikambo <zwane@linuxpower.ca> + * Copyright (C) 2008, 2009 Intel Corporation + * Author: Andi Kleen */ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/percpu.h> #include <asm/processor.h> +#include <asm/apic.h> #include <asm/msr.h> #include <asm/mce.h> #include <asm/hw_irq.h> #include <asm/idle.h> #include <asm/therm_throt.h> +#include <asm/apic.h> asmlinkage void smp_thermal_interrupt(void) { @@ -24,7 +28,7 @@ asmlinkage void smp_thermal_interrupt(void) rdmsrl(MSR_IA32_THERM_STATUS, msr_val); if (therm_throt_process(msr_val & 1)) - mce_log_therm_throt_event(smp_processor_id(), msr_val); + mce_log_therm_throt_event(msr_val); inc_irq_stat(irq_thermal_count); irq_exit(); @@ -48,13 +52,13 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) */ rdmsr(MSR_IA32_MISC_ENABLE, l, h); h = apic_read(APIC_LVTTHMR); - if ((l & (1 << 3)) && (h & APIC_DM_SMI)) { + if ((l & MSR_IA32_MISC_ENABLE_TM1) && (h & APIC_DM_SMI)) { printk(KERN_DEBUG "CPU%d: Thermal monitoring handled by SMI\n", cpu); return; } - if (cpu_has(c, X86_FEATURE_TM2) && (l & (1 << 13))) + if (cpu_has(c, X86_FEATURE_TM2) && (l & MSR_IA32_MISC_ENABLE_TM2)) tm2 = 1; if (h & APIC_VECTOR_MASK) { @@ -72,7 +76,7 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) wrmsr(MSR_IA32_THERM_INTERRUPT, l | 0x03, h); rdmsr(MSR_IA32_MISC_ENABLE, l, h); - wrmsr(MSR_IA32_MISC_ENABLE, l | (1 << 3), h); + wrmsr(MSR_IA32_MISC_ENABLE, l | MSR_IA32_MISC_ENABLE_TM1, h); l = apic_read(APIC_LVTTHMR); apic_write(APIC_LVTTHMR, l & ~APIC_LVT_MASKED); @@ -84,7 +88,209 @@ static void intel_init_thermal(struct cpuinfo_x86 *c) return; } +/* + * Support for Intel Correct Machine Check Interrupts. This allows + * the CPU to raise an interrupt when a corrected machine check happened. + * Normally we pick those up using a regular polling timer. + * Also supports reliable discovery of shared banks. + */ + +static DEFINE_PER_CPU(mce_banks_t, mce_banks_owned); + +/* + * cmci_discover_lock protects against parallel discovery attempts + * which could race against each other. + */ +static DEFINE_SPINLOCK(cmci_discover_lock); + +#define CMCI_THRESHOLD 1 + +static int cmci_supported(int *banks) +{ + u64 cap; + + /* + * Vendor check is not strictly needed, but the initial + * initialization is vendor keyed and this + * makes sure none of the backdoors are entered otherwise. + */ + if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) + return 0; + if (!cpu_has_apic || lapic_get_maxlvt() < 6) + return 0; + rdmsrl(MSR_IA32_MCG_CAP, cap); + *banks = min_t(unsigned, MAX_NR_BANKS, cap & 0xff); + return !!(cap & MCG_CMCI_P); +} + +/* + * The interrupt handler. This is called on every event. + * Just call the poller directly to log any events. + * This could in theory increase the threshold under high load, + * but doesn't for now. + */ +static void intel_threshold_interrupt(void) +{ + machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); + mce_notify_user(); +} + +static void print_update(char *type, int *hdr, int num) +{ + if (*hdr == 0) + printk(KERN_INFO "CPU %d MCA banks", smp_processor_id()); + *hdr = 1; + printk(KERN_CONT " %s:%d", type, num); +} + +/* + * Enable CMCI (Corrected Machine Check Interrupt) for available MCE banks + * on this CPU. Use the algorithm recommended in the SDM to discover shared + * banks. + */ +static void cmci_discover(int banks, int boot) +{ + unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned); + int hdr = 0; + int i; + + spin_lock(&cmci_discover_lock); + for (i = 0; i < banks; i++) { + u64 val; + + if (test_bit(i, owned)) + continue; + + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + + /* Already owned by someone else? */ + if (val & CMCI_EN) { + if (test_and_clear_bit(i, owned) || boot) + print_update("SHD", &hdr, i); + __clear_bit(i, __get_cpu_var(mce_poll_banks)); + continue; + } + + val |= CMCI_EN | CMCI_THRESHOLD; + wrmsrl(MSR_IA32_MC0_CTL2 + i, val); + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + + /* Did the enable bit stick? -- the bank supports CMCI */ + if (val & CMCI_EN) { + if (!test_and_set_bit(i, owned) || boot) + print_update("CMCI", &hdr, i); + __clear_bit(i, __get_cpu_var(mce_poll_banks)); + } else { + WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks))); + } + } + spin_unlock(&cmci_discover_lock); + if (hdr) + printk(KERN_CONT "\n"); +} + +/* + * Just in case we missed an event during initialization check + * all the CMCI owned banks. + */ +void cmci_recheck(void) +{ + unsigned long flags; + int banks; + + if (!mce_available(¤t_cpu_data) || !cmci_supported(&banks)) + return; + local_irq_save(flags); + machine_check_poll(MCP_TIMESTAMP, &__get_cpu_var(mce_banks_owned)); + local_irq_restore(flags); +} + +/* + * Disable CMCI on this CPU for all banks it owns when it goes down. + * This allows other CPUs to claim the banks on rediscovery. + */ +void cmci_clear(void) +{ + int i; + int banks; + u64 val; + + if (!cmci_supported(&banks)) + return; + spin_lock(&cmci_discover_lock); + for (i = 0; i < banks; i++) { + if (!test_bit(i, __get_cpu_var(mce_banks_owned))) + continue; + /* Disable CMCI */ + rdmsrl(MSR_IA32_MC0_CTL2 + i, val); + val &= ~(CMCI_EN|CMCI_THRESHOLD_MASK); + wrmsrl(MSR_IA32_MC0_CTL2 + i, val); + __clear_bit(i, __get_cpu_var(mce_banks_owned)); + } + spin_unlock(&cmci_discover_lock); +} + +/* + * After a CPU went down cycle through all the others and rediscover + * Must run in process context. + */ +void cmci_rediscover(int dying) +{ + int banks; + int cpu; + cpumask_var_t old; + + if (!cmci_supported(&banks)) + return; + if (!alloc_cpumask_var(&old, GFP_KERNEL)) + return; + cpumask_copy(old, ¤t->cpus_allowed); + + for_each_online_cpu (cpu) { + if (cpu == dying) + continue; + if (set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu))) + continue; + /* Recheck banks in case CPUs don't all have the same */ + if (cmci_supported(&banks)) + cmci_discover(banks, 0); + } + + set_cpus_allowed_ptr(current, old); + free_cpumask_var(old); +} + +/* + * Reenable CMCI on this CPU in case a CPU down failed. + */ +void cmci_reenable(void) +{ + int banks; + if (cmci_supported(&banks)) + cmci_discover(banks, 0); +} + +static __cpuinit void intel_init_cmci(void) +{ + int banks; + + if (!cmci_supported(&banks)) + return; + + mce_threshold_vector = intel_threshold_interrupt; + cmci_discover(banks, 1); + /* + * For CPU #0 this runs with still disabled APIC, but that's + * ok because only the vector is set up. We still do another + * check for the banks later for CPU #0 just to make sure + * to not miss any events. + */ + apic_write(APIC_LVTCMCI, THRESHOLD_APIC_VECTOR|APIC_DM_FIXED); + cmci_recheck(); +} + void mce_intel_feature_init(struct cpuinfo_x86 *c) { intel_init_thermal(c); + intel_init_cmci(); } |