6 files changed, 37 insertions, 73 deletions

diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 73da6b64f5b..d6bd49faa40 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -439,7 +439,6 @@ void intel_pmu_pebs_enable(struct perf_event *event)
 	hwc->config &= ~ARCH_PERFMON_EVENTSEL_INT;
 
 	cpuc->pebs_enabled |= 1ULL << hwc->idx;
-	WARN_ON_ONCE(cpuc->enabled);
 
 	if (x86_pmu.intel_cap.pebs_trap && event->attr.precise_ip > 1)
 		intel_pmu_lbr_enable(event);
diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
index 3fab3de3ce9..47a7e63bfe5 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c
@@ -72,8 +72,6 @@ void intel_pmu_lbr_enable(struct perf_event *event)
 	if (!x86_pmu.lbr_nr)
 		return;
 
-	WARN_ON_ONCE(cpuc->enabled);
-
 	/*
 	 * Reset the LBR stack if we changed task context to
 	 * avoid data leaks.
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index 485204f58cd..80bfe1ab003 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -299,22 +299,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 				 *next = &next_p->thread;
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
-	bool preload_fpu;
+	fpu_switch_t fpu;
 
 	/* never put a printk in __switch_to... printk() calls wake_up*() indirectly */
 
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
-	__unlazy_fpu(prev_p);
-
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
+	fpu = switch_fpu_prepare(prev_p, next_p);
 
 	/*
 	 * Reload esp0.
@@ -354,11 +343,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(next_p)->flags & _TIF_WORK_CTXSW_NEXT))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/* If we're going to preload the fpu context, make sure clts
-	   is run while we're batching the cpu state updates. */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -368,15 +352,14 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	 */
 	arch_end_context_switch(next_p);
 
-	if (preload_fpu)
-		__math_state_restore();
-
 	/*
 	 * Restore %gs if needed (which is common)
 	 */
 	if (prev->gs | next->gs)
 		lazy_load_gs(next->gs);
 
+	switch_fpu_finish(next_p, fpu);
+
 	percpu_write(current_task, next_p);
 
 	return prev_p;
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index 9b9fe4a85c8..1fd94bc4279 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -386,18 +386,9 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 	int cpu = smp_processor_id();
 	struct tss_struct *tss = &per_cpu(init_tss, cpu);
 	unsigned fsindex, gsindex;
-	bool preload_fpu;
+	fpu_switch_t fpu;
 
-	/*
-	 * If the task has used fpu the last 5 timeslices, just do a full
-	 * restore of the math state immediately to avoid the trap; the
-	 * chances of needing FPU soon are obviously high now
-	 */
-	preload_fpu = tsk_used_math(next_p) && next_p->fpu_counter > 5;
-
-	/* we're going to use this soon, after a few expensive things */
-	if (preload_fpu)
-		prefetch(next->fpu.state);
+	fpu = switch_fpu_prepare(prev_p, next_p);
 
 	/*
 	 * Reload esp0, LDT and the page table pointer:
@@ -427,13 +418,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 
 	load_TLS(next, cpu);
 
-	/* Must be after DS reload */
-	__unlazy_fpu(prev_p);
-
-	/* Make sure cpu is ready for new context */
-	if (preload_fpu)
-		clts();
-
 	/*
 	 * Leave lazy mode, flushing any hypercalls made here.
 	 * This must be done before restoring TLS segments so
@@ -474,6 +458,8 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		wrmsrl(MSR_KERNEL_GS_BASE, next->gs);
 	prev->gsindex = gsindex;
 
+	switch_fpu_finish(next_p, fpu);
+
 	/*
 	 * Switch the PDA and FPU contexts.
 	 */
@@ -492,13 +478,6 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p)
 		     task_thread_info(prev_p)->flags & _TIF_WORK_CTXSW_PREV))
 		__switch_to_xtra(prev_p, next_p, tss);
 
-	/*
-	 * Preload the FPU context, now that we've determined that the
-	 * task is likely to be using it. 
-	 */
-	if (preload_fpu)
-		__math_state_restore();
-
 	return prev_p;
 }
 
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 482ec3af206..77da5b475ad 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -571,25 +571,34 @@ asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
 }
 
 /*
- * __math_state_restore assumes that cr0.TS is already clear and the
- * fpu state is all ready for use.  Used during context switch.
+ * This gets called with the process already owning the
+ * FPU state, and with CR0.TS cleared. It just needs to
+ * restore the FPU register state.
  */
-void __math_state_restore(void)
+void __math_state_restore(struct task_struct *tsk)
 {
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
+	/* We need a safe address that is cheap to find and that is already
+	   in L1. We've just brought in "tsk->thread.has_fpu", so use that */
+#define safe_address (tsk->thread.has_fpu)
+
+	/* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+	   is pending.  Clear the x87 state here by setting it to fixed
+	   values. safe_address is a random variable that should be in L1 */
+	alternative_input(
+		ASM_NOP8 ASM_NOP2,
+		"emms\n\t"	  	/* clear stack tags */
+		"fildl %P[addr]",	/* set F?P to defined value */
+		X86_FEATURE_FXSAVE_LEAK,
+		[addr] "m" (safe_address));
 
 	/*
 	 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
 	 */
 	if (unlikely(restore_fpu_checking(tsk))) {
-		stts();
+		__thread_fpu_end(tsk);
 		force_sig(SIGSEGV, tsk);
 		return;
 	}
-
-	thread->status |= TS_USEDFPU;	/* So we fnsave on switch_to() */
-	tsk->fpu_counter++;
 }
 
 /*
@@ -599,13 +608,12 @@ void __math_state_restore(void)
  * Careful.. There are problems with IBM-designed IRQ13 behaviour.
  * Don't touch unless you *really* know how it works.
  *
- * Must be called with kernel preemption disabled (in this case,
- * local interrupts are disabled at the call-site in entry.S).
+ * Must be called with kernel preemption disabled (eg with local
+ * local interrupts as in the case of do_device_not_available).
  */
-asmlinkage void math_state_restore(void)
+void math_state_restore(void)
 {
-	struct thread_info *thread = current_thread_info();
-	struct task_struct *tsk = thread->task;
+	struct task_struct *tsk = current;
 
 	if (!tsk_used_math(tsk)) {
 		local_irq_enable();
@@ -622,9 +630,10 @@ asmlinkage void math_state_restore(void)
 		local_irq_disable();
 	}
 
-	clts();				/* Allow maths ops (or we recurse) */
+	__thread_fpu_begin(tsk);
+	__math_state_restore(tsk);
 
-	__math_state_restore();
+	tsk->fpu_counter++;
 }
 EXPORT_SYMBOL_GPL(math_state_restore);
 
diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c
index a3911343976..71109111411 100644
--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -47,7 +47,7 @@ void __sanitize_i387_state(struct task_struct *tsk)
 	if (!fx)
 		return;
 
-	BUG_ON(task_thread_info(tsk)->status & TS_USEDFPU);
+	BUG_ON(__thread_has_fpu(tsk));
 
 	xstate_bv = tsk->thread.fpu.state->xsave.xsave_hdr.xstate_bv;
 
@@ -168,7 +168,7 @@ int save_i387_xstate(void __user *buf)
 	if (!used_math())
 		return 0;
 
-	if (task_thread_info(tsk)->status & TS_USEDFPU) {
+	if (user_has_fpu()) {
 		if (use_xsave())
 			err = xsave_user(buf);
 		else
@@ -176,8 +176,7 @@ int save_i387_xstate(void __user *buf)
 
 		if (err)
 			return err;
-		task_thread_info(tsk)->status &= ~TS_USEDFPU;
-		stts();
+		user_fpu_end();
 	} else {
 		sanitize_i387_state(tsk);
 		if (__copy_to_user(buf, &tsk->thread.fpu.state->fxsave,
@@ -292,10 +291,7 @@ int restore_i387_xstate(void __user *buf)
 			return err;
 	}
 
-	if (!(task_thread_info(current)->status & TS_USEDFPU)) {
-		clts();
-		task_thread_info(current)->status |= TS_USEDFPU;
-	}
+	user_fpu_begin();
 	if (use_xsave())
 		err = restore_user_xstate(buf);
 	else