diff options
Diffstat (limited to 'arch')
74 files changed, 1236 insertions, 719 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3146ed3f6ec..380e4f01665 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -3,7 +3,7 @@ config ARM default y select HAVE_AOUT select HAVE_DMA_API_DEBUG - select HAVE_IDE + select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -195,7 +195,8 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime" + bool "Patch physical to virtual translations at runtime" if EMBEDDED + default y depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -204,16 +205,12 @@ config ARM_PATCH_PHYS_VIRT kernel in system memory. This can only be used with non-XIP MMU kernels where the base - of physical memory is at a 16MB boundary, or theoretically 64K - for the MSM machine class. + of physical memory is at a 16MB boundary. + + Only disable this option if you know that you do not require + this feature (eg, building a kernel for a single machine) and + you need to shrink the kernel to the minimal size. -config ARM_PATCH_PHYS_VIRT_16BIT - def_bool y - depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM - help - This option extends the physical to virtual translation patching - to allow physical memory down to a theoretical minimum of 64K - boundaries. source "init/Kconfig" @@ -301,7 +298,6 @@ config ARCH_AT91 select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP - select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -385,6 +381,7 @@ config ARCH_FOOTBRIDGE select CPU_SA110 select FOOTBRIDGE select GENERIC_CLOCKEVENTS + select HAVE_IDE help Support for systems based on the DC21285 companion chip ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. @@ -631,6 +628,8 @@ config ARCH_PXA select SPARSE_IRQ select AUTO_ZRELADDR select MULTI_IRQ_HANDLER + select ARM_CPU_SUSPEND if PM + select HAVE_IDE help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -671,6 +670,7 @@ config ARCH_RPC select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select HAVE_IDE help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. @@ -689,6 +689,7 @@ config ARCH_SA1100 select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB + select HAVE_IDE help Support for StrongARM 11x0 based boards. @@ -1375,6 +1376,7 @@ config SMP MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \ ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \ ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE + depends on MMU select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP help @@ -1407,6 +1409,31 @@ config SMP_ON_UP If you don't know what to do here, say Y. +config ARM_CPU_TOPOLOGY + bool "Support cpu topology definition" + depends on SMP && CPU_V7 + default y + help + Support ARM cpu topology definition. The MPIDR register defines + affinity between processors which is then used to describe the cpu + topology of an ARM System. + +config SCHED_MC + bool "Multi-core scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Multi-core scheduler support improves the CPU scheduler's decision + making when dealing with multi-core CPU chips at a cost of slightly + increased overhead in some places. If unsure say N here. + +config SCHED_SMT + bool "SMT scheduler support" + depends on ARM_CPU_TOPOLOGY + help + Improves the CPU scheduler's decision making when dealing with + MultiThreading at a cost of slightly increased overhead in some + places. If unsure say N here. + config HAVE_ARM_SCU bool help @@ -1482,6 +1509,7 @@ config THUMB2_KERNEL depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL select AEABI select ARM_ASM_UNIFIED + select ARM_UNWIND help By enabling this option, the kernel will be compiled in Thumb-2 mode. A compiler/assembler that understand the unified @@ -2101,6 +2129,9 @@ config ARCH_SUSPEND_POSSIBLE CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y +config ARM_CPU_SUSPEND + def_bool PM_SLEEP + endmenu source "net/Kconfig" diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 81cbe40c159..df3eb3ccd76 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -65,13 +65,71 @@ config DEBUG_USER # These options are only for real kernel hackers who want to get their hands dirty. config DEBUG_LL - bool "Kernel low-level debugging functions" + bool "Kernel low-level debugging functions (read help!)" depends on DEBUG_KERNEL help Say Y here to include definitions of printascii, printch, printhex in the kernel. This is helpful if you are debugging code that executes before the console is initialized. + Note that selecting this option will limit the kernel to a single + UART definition, as specified below. Attempting to boot the kernel + image on a different platform *will not work*, so this option should + not be enabled for kernels that are intended to be portable. + +choice + prompt "Kernel low-level debugging port" + depends on DEBUG_LL + + config DEBUG_LL_UART_NONE + bool "No low-level debugging UART" + help + Say Y here if your platform doesn't provide a UART option + below. This relies on your platform choosing the right UART + definition internally in order for low-level debugging to + work. + + config DEBUG_ICEDCC + bool "Kernel low-level debugging via EmbeddedICE DCC channel" + help + Say Y here if you want the debug print routines to direct + their output to the EmbeddedICE macrocell's DCC channel using + co-processor 14. This is known to work on the ARM9 style ICE + channel and on the XScale with the PEEDI. + + Note that the system will appear to hang during boot if there + is nothing connected to read from the DCC. + + config DEBUG_FOOTBRIDGE_COM1 + bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the 8250 at PCI COM1. + + config DEBUG_DC21285_PORT + bool "Kernel low-level debugging messages via footbridge serial port" + depends on FOOTBRIDGE + help + Say Y here if you want the debug print routines to direct + their output to the serial port in the DC21285 (Footbridge). + + config DEBUG_CLPS711X_UART1 + bool "Kernel low-level debugging messages via UART1" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the first serial port on these devices. + + config DEBUG_CLPS711X_UART2 + bool "Kernel low-level debugging messages via UART2" + depends on ARCH_CLPS711X + help + Say Y here if you want the debug print routines to direct + their output to the second serial port on these devices. + +endchoice + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL @@ -80,43 +138,14 @@ config EARLY_PRINTK kernel low-level debugging functions. Add earlyprintk to your kernel parameters to enable this console. -config DEBUG_ICEDCC - bool "Kernel low-level debugging via EmbeddedICE DCC channel" - depends on DEBUG_LL - help - Say Y here if you want the debug print routines to direct their - output to the EmbeddedICE macrocell's DCC channel using - co-processor 14. This is known to work on the ARM9 style ICE - channel and on the XScale with the PEEDI. - - It does include a timeout to ensure that the system does not - totally freeze when there is nothing connected to read. - config OC_ETM bool "On-chip ETM and ETB" - select ARM_AMBA + depends on ARM_AMBA help Enables the on-chip embedded trace macrocell and embedded trace buffer driver that will allow you to collect traces of the kernel code. -config DEBUG_DC21285_PORT - bool "Kernel low-level debugging messages via footbridge serial port" - depends on DEBUG_LL && FOOTBRIDGE - help - Say Y here if you want the debug print routines to direct their - output to the serial port in the DC21285 (Footbridge). Saying N - will cause the debug messages to appear on the first 16550 - serial port. - -config DEBUG_CLPS711X_UART2 - bool "Kernel low-level debugging messages via UART2" - depends on DEBUG_LL && ARCH_CLPS711X - help - Say Y here if you want the debug print routines to direct their - output to the second serial port on these devices. Saying N will - cause the debug messages to appear on the first serial port. - config DEBUG_S3C_UART depends on PLAT_SAMSUNG int "S3C UART to use for low-level debug" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 70c424eaf7b..5665c2a3b65 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -128,6 +128,9 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000 ifeq ($(CONFIG_ARCH_SA1100),y) textofs-$(CONFIG_SA1111) := 0x00208000 endif +textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000 +textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 3227ca952a1..666b278e56d 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -180,7 +180,7 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, return -EINVAL; mask = 0xff << shift; - bit = 1 << (cpu + shift); + bit = 1 << (cpu_logical_map(cpu) + shift); spin_lock(&irq_controller_lock); val = readl_relaxed(reg) & ~mask; @@ -259,9 +259,15 @@ static void __init gic_dist_init(struct gic_chip_data *gic, unsigned int irq_start) { unsigned int gic_irqs, irq_limit, i; + u32 cpumask; void __iomem *base = gic->dist_base; - u32 cpumask = 1 << smp_processor_id(); + u32 cpu = 0; +#ifdef CONFIG_SMP + cpu = cpu_logical_map(smp_processor_id()); +#endif + + cpumask = 1 << cpu; cpumask |= cpumask << 8; cpumask |= cpumask << 16; @@ -382,7 +388,12 @@ void __cpuinit gic_enable_ppi(unsigned int irq) #ifdef CONFIG_SMP void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) { - unsigned long map = *cpus_addr(*mask); + int cpu; + unsigned long map = 0; + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + map |= 1 << cpu_logical_map(cpu); /* * Ensure that stores to Normal memory are visible to the diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 197f81c7735..01f18a421b1 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -346,7 +346,8 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, /* Identify which VIC cell this one is, by reading the ID */ for (i = 0; i < 4; i++) { - u32 addr = ((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + void __iomem *addr; + addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); cellid |= (readl(addr) & 0xff) << (8 * i); } vendor = (cellid >> 12) & 0xff; diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index cd4458f6417..cb47d28cbe1 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -8,6 +8,7 @@ #define CPUID_CACHETYPE 1 #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 +#define CPUID_MPIDR 5 #define CPUID_EXT_PFR0 "c1, 0" #define CPUID_EXT_PFR1 "c1, 1" @@ -70,6 +71,11 @@ static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void) return read_cpuid(CPUID_TCM); } +static inline unsigned int __attribute_const__ read_cpuid_mpidr(void) +{ + return read_cpuid(CPUID_MPIDR); +} + /* * Intel's XScale3 core supports some v6 features (supersections, L2) * but advertises itself as v5 as it does not support the v6 ISA. For diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 7a21d0bf713..28b7ee8d739 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -32,7 +32,7 @@ static inline unsigned long dma_to_pfn(struct device *dev, dma_addr_t addr) static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) { - return (void *)__bus_to_virt(addr); + return (void *)__bus_to_virt((unsigned long)addr); } static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) diff --git a/arch/arm/include/asm/ecard.h b/arch/arm/include/asm/ecard.h index 29f2610efc7..eaea14676d5 100644 --- a/arch/arm/include/asm/ecard.h +++ b/arch/arm/include/asm/ecard.h @@ -161,7 +161,6 @@ struct expansion_card { /* Private internal data */ const char *card_desc; /* Card description */ - CONST unsigned int podaddr; /* Base Linux address for card */ CONST loader_t loader; /* loader program */ u64 dma_mask; }; diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h new file mode 100644 index 00000000000..5abaf5bbd98 --- /dev/null +++ b/arch/arm/include/asm/exception.h @@ -0,0 +1,19 @@ +/* + * Annotations for marking C functions as exception handlers. + * + * These should only be used for C functions that are called from the low + * level exception entry code and not any intervening C code. + */ +#ifndef __ASM_ARM_EXCEPTION_H +#define __ASM_ARM_EXCEPTION_H + +#include <linux/ftrace.h> + +#define __exception __attribute__((section(".exception.text"))) +#ifdef CONFIG_FUNCTION_GRAPH_TRACER +#define __exception_irq_entry __irq_entry +#else +#define __exception_irq_entry __exception +#endif + +#endif /* __ASM_ARM_EXCEPTION_H */ diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 99a6ed7e1bf..434edccdf7f 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -52,6 +52,8 @@ #define L2X0_LOCKDOWN_WAY_D_BASE 0x900 #define L2X0_LOCKDOWN_WAY_I_BASE 0x904 #define L2X0_LOCKDOWN_STRIDE 0x08 +#define L2X0_ADDR_FILTER_START 0xC00 +#define L2X0_ADDR_FILTER_END 0xC04 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -65,8 +67,23 @@ #define L2X0_CACHE_ID_PART_MASK (0xf << 6) #define L2X0_CACHE_ID_PART_L210 (1 << 6) #define L2X0_CACHE_ID_PART_L310 (3 << 6) +#define L2X0_CACHE_ID_RTL_MASK 0x3f +#define L2X0_CACHE_ID_RTL_R0P0 0x0 +#define L2X0_CACHE_ID_RTL_R1P0 0x2 +#define L2X0_CACHE_ID_RTL_R2P0 0x4 +#define L2X0_CACHE_ID_RTL_R3P0 0x5 +#define L2X0_CACHE_ID_RTL_R3P1 0x6 +#define L2X0_CACHE_ID_RTL_R3P2 0x8 #define L2X0_AUX_CTRL_MASK 0xc0000fff +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT 0 +#define L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK 0x7 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT 3 +#define L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK (0x7 << 3) +#define L2X0_AUX_CTRL_TAG_LATENCY_SHIFT 6 +#define L2X0_AUX_CTRL_TAG_LATENCY_MASK (0x7 << 6) +#define L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT 9 +#define L2X0_AUX_CTRL_DIRTY_LATENCY_MASK (0x7 << 9) #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 #define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) @@ -77,8 +94,33 @@ #define L2X0_AUX_CTRL_INSTR_PREFETCH_SHIFT 29 #define L2X0_AUX_CTRL_EARLY_BRESP_SHIFT 30 +#define L2X0_LATENCY_CTRL_SETUP_SHIFT 0 +#define L2X0_LATENCY_CTRL_RD_SHIFT 4 +#define L2X0_LATENCY_CTRL_WR_SHIFT 8 + +#define L2X0_ADDR_FILTER_EN 1 + #ifndef __ASSEMBLY__ extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); + +struct l2x0_regs { + unsigned long phy_base; + unsigned long aux_ctrl; + /* + * Whether the following registers need to be saved/restored + * depends on platform + */ + unsigned long tag_latency; + unsigned long data_latency; + unsigned long filter_start; + unsigned long filter_end; + unsigned long prefetch_ctrl; + unsigned long pwr_ctrl; +}; + +extern struct l2x0_regs l2x0_saved_regs; + #endif #endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index d66605dea55..dc2d5102e68 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -110,6 +110,27 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #include <mach/io.h> /* + * This is the limit of PC card/PCI/ISA IO space, which is by default + * 64K if we have PC card, PCI or ISA support. Otherwise, default to + * zero to prevent ISA/PCI drivers claiming IO space (and potentially + * oopsing.) + * + * Only set this larger if you really need inb() et.al. to operate over + * a larger address space. Note that SOC_COMMON ioremaps each sockets + * IO space area, and so inb() et.al. must be defined to operate as per + * readb() et.al. on such platforms. + */ +#ifndef IO_SPACE_LIMIT +#if defined(CONFIG_PCMCIA_SOC_COMMON) || defined(CONFIG_PCMCIA_SOC_COMMON_MODULE) +#define IO_SPACE_LIMIT ((resource_size_t)0xffffffff) +#elif defined(CONFIG_PCI) || defined(CONFIG_ISA) || defined(CONFIG_PCCARD) +#define IO_SPACE_LIMIT ((resource_size_t)0xffff) +#else +#define IO_SPACE_LIMIT ((resource_size_t)0) +#endif +#endif + +/* * IO port access primitives * ------------------------- * @@ -260,10 +281,16 @@ extern void _memset_io(volatile void __iomem *, int, size_t); #define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; }) #define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; }) +#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; }) +#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; }) + #define iowrite8(v,p) ({ __iowmb(); (void)__raw_writeb(v, p); }) #define iowrite16(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); }) #define iowrite32(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); }) +#define iowrite16be(v,p) ({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_be16(v), p); }) +#define iowrite32be(v,p) ({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_be32(v), p); }) + #define ioread8_rep(p,d,c) __raw_readsb(p,d,c) #define ioread16_rep(p,d,c) __raw_readsw(p,d,c) #define ioread32_rep(p,d,c) __raw_readsl(p,d,c) diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h index ff66638ff54..6fd955d34c6 100644 --- a/arch/arm/include/asm/localtimer.h +++ b/arch/arm/include/asm/localtimer.h @@ -24,6 +24,10 @@ void percpu_timer_setup(void); */ asmlinkage void do_local_timer(struct pt_regs *); +/* + * Called from C code + */ +void handle_local_timer(struct pt_regs *); #ifdef CONFIG_LOCAL_TIMERS diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index b8de516e600..441fc4fe826 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -160,7 +160,6 @@ * so that all we need to do is modify the 8-bit constant field. */ #define __PV_BITS_31_24 0x81000000 -#define __PV_BITS_23_16 0x00810000 extern unsigned long __pv_phys_offset; #define PHYS_OFFSET __pv_phys_offset @@ -178,9 +177,6 @@ static inline unsigned long __virt_to_phys(unsigned long x) { unsigned long t; __pv_stub(x, t, "add", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "add", __PV_BITS_23_16); -#endif return t; } @@ -188,9 +184,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) { unsigned long t; __pv_stub(x, t, "sub", __PV_BITS_31_24); -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - __pv_stub(t, t, "sub", __PV_BITS_23_16); -#endif return t; } #else diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 543b44916d2..6c6809f982f 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -31,11 +31,7 @@ struct mod_arch_specific { /* Add __virt_to_phys patching state as well */ #ifdef CONFIG_ARM_PATCH_PHYS_VIRT -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT -#define MODULE_ARCH_VERMAGIC_P2V "p2v16 " -#else #define MODULE_ARCH_VERMAGIC_P2V "p2v8 " -#endif #else #define MODULE_ARCH_VERMAGIC_P2V "" #endif diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h index d8387437ec5..53426c66352 100644 --- a/arch/arm/include/asm/outercache.h +++ b/arch/arm/include/asm/outercache.h @@ -34,6 +34,7 @@ struct outer_cache_fns { void (*sync)(void); #endif void (*set_debug)(unsigned long); + void (*resume)(void); }; #ifdef CONFIG_OUTER_CACHE @@ -74,6 +75,12 @@ static inline void outer_disable(void) outer_cache.disable(); } +static inline void outer_resume(void) +{ + if (outer_cache.resume) + outer_cache.resume(); +} + #else static inline void outer_inv_range(phys_addr_t start, phys_addr_t end) diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ac75d084888..ca94653f1ec 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -151,47 +151,7 @@ extern void __cpu_copy_user_highpage(struct page *to, struct page *from, #define clear_page(page) memset((void *)(page), 0, PAGE_SIZE) extern void copy_page(void *to, const void *from); -typedef unsigned long pteval_t; - -#undef STRICT_MM_TYPECHECKS - -#ifdef STRICT_MM_TYPECHECKS -/* - * These are used to make use of C type-checking.. - */ -typedef struct { pteval_t pte; } pte_t; -typedef struct { unsigned long pmd; } pmd_t; -typedef struct { unsigned long pgd[2]; } pgd_t; -typedef struct { unsigned long pgprot; } pgprot_t; - -#define pte_val(x) ((x).pte) -#define pmd_val(x) ((x).pmd) -#define pgd_val(x) ((x).pgd[0]) -#define pgprot_val(x) ((x).pgprot) - -#define __pte(x) ((pte_t) { (x) } ) -#define __pmd(x) ((pmd_t) { (x) } ) -#define __pgprot(x) ((pgprot_t) { (x) } ) - -#else -/* - * .. while these make it easier on the compiler - */ -typedef pteval_t pte_t; -typedef unsigned long pmd_t; -typedef unsigned long pgd_t[2]; -typedef unsigned long pgprot_t; - -#define pte_val(x) (x) -#define pmd_val(x) (x) -#define pgd_val(x) ((x)[0]) -#define pgprot_val(x) (x) - -#define __pte(x) (x) -#define __pmd(x) (x) -#define __pgprot(x) (x) - -#endif /* STRICT_MM_TYPECHECKS */ +#include <asm/pgtable-2level-types.h> #endif /* CONFIG_MMU */ diff --git a/arch/arm/include/asm/pgalloc.h b/arch/arm/include/asm/pgalloc.h index 22de005f159..3e08fd3fbb6 100644 --- a/arch/arm/include/asm/pgalloc.h +++ b/arch/arm/include/asm/pgalloc.h @@ -105,9 +105,9 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte) } static inline void __pmd_populate(pmd_t *pmdp, phys_addr_t pte, - unsigned long prot) + pmdval_t prot) { - unsigned long pmdval = (pte + PTE_HWTABLE_OFF) | prot; + pmdval_t pmdval = (pte + PTE_HWTABLE_OFF) | prot; pmdp[0] = __pmd(pmdval); pmdp[1] = __pmd(pmdval + 256 * sizeof(pte_t)); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable-2level-hwdef.h b/arch/arm/include/asm/pgtable-2level-hwdef.h new file mode 100644 index 00000000000..5cfba15cb40 --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-hwdef.h @@ -0,0 +1,93 @@ +/* + * arch/arm/include/asm/pgtable-2level-hwdef.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_HWDEF_H +#define _ASM_PGTABLE_2LEVEL_HWDEF_H + +/* + * Hardware page table definitions. + * + * + Level 1 descriptor (PMD) + * - common + */ +#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0) +#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0) +#define PMD_TYPE_TABLE (_AT(pmdval_t, 1) << 0) +#define PMD_TYPE_SECT (_AT(pmdval_t, 2) << 0) +#define PMD_BIT4 (_AT(pmdval_t, 1) << 4) +#define PMD_DOMAIN(x) (_AT(pmdval_t, (x)) << 5) +#define PMD_PROTECTION (_AT(pmdval_t, 1) << 9) /* v5 */ +/* + * - section + */ +#define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) +#define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) +#define PMD_SECT_XN (_AT(pmdval_t, 1) << 4) /* v6 */ +#define PMD_SECT_AP_WRITE (_AT(pmdval_t, 1) << 10) +#define PMD_SECT_AP_READ (_AT(pmdval_t, 1) << 11) +#define PMD_SECT_TEX(x) (_AT(pmdval_t, (x)) << 12) /* v5 */ +#define PMD_SECT_APX (_AT(pmdval_t, 1) << 15) /* v6 */ +#define PMD_SECT_S (_AT(pmdval_t, 1) << 16) /* v6 */ +#define PMD_SECT_nG (_AT(pmdval_t, 1) << 17) /* v6 */ +#define PMD_SECT_SUPER (_AT(pmdval_t, 1) << 18) /* v6 */ +#define PMD_SECT_AF (_AT(pmdval_t, 0)) + +#define PMD_SECT_UNCACHED (_AT(pmdval_t, 0)) +#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) +#define PMD_SECT_WT (PMD_SECT_CACHEABLE) +#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) +#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) +#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) + +/* + * - coarse table (not used) + */ + +/* + * + Level 2 descriptor (PTE) + * - common + */ +#define PTE_TYPE_MASK (_AT(pteval_t, 3) << 0) +#define PTE_TYPE_FAULT (_AT(pteval_t, 0) << 0) +#define PTE_TYPE_LARGE (_AT(pteval_t, 1) << 0) +#define PTE_TYPE_SMALL (_AT(pteval_t, 2) << 0) +#define PTE_TYPE_EXT (_AT(pteval_t, 3) << 0) /* v5 */ +#define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) +#define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) + +/* + * - extended small page/tiny page + */ +#define PTE_EXT_XN (_AT(pteval_t, 1) << 0) /* v6 */ +#define PTE_EXT_AP_MASK (_AT(pteval_t, 3) << 4) +#define PTE_EXT_AP0 (_AT(pteval_t, 1) << 4) +#define PTE_EXT_AP1 (_AT(pteval_t, 2) << 4) +#define PTE_EXT_AP_UNO_SRO (_AT(pteval_t, 0) << 4) +#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) +#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) +#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) +#define PTE_EXT_TEX(x) (_AT(pteval_t, (x)) << 6) /* v5 */ +#define PTE_EXT_APX (_AT(pteval_t, 1) << 9) /* v6 */ +#define PTE_EXT_COHERENT (_AT(pteval_t, 1) << 9) /* XScale3 */ +#define PTE_EXT_SHARED (_AT(pteval_t, 1) << 10) /* v6 */ +#define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* v6 */ + +/* + * - small page + */ +#define PTE_SMALL_AP_MASK (_AT(pteval_t, 0xff) << 4) +#define PTE_SMALL_AP_UNO_SRO (_AT(pteval_t, 0x00) << 4) +#define PTE_SMALL_AP_UNO_SRW (_AT(pteval_t, 0x55) << 4) +#define PTE_SMALL_AP_URO_SRW (_AT(pteval_t, 0xaa) << 4) +#define PTE_SMALL_AP_URW_SRW (_AT(pteval_t, 0xff) << 4) + +#define PHYS_MASK (~0UL) + +#endif diff --git a/arch/arm/include/asm/pgtable-2level-types.h b/arch/arm/include/asm/pgtable-2level-types.h new file mode 100644 index 00000000000..66cb5b0e89c --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level-types.h @@ -0,0 +1,67 @@ +/* + * arch/arm/include/asm/pgtable-2level-types.h + * + * Copyright (C) 1995-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef _ASM_PGTABLE_2LEVEL_TYPES_H +#define _ASM_PGTABLE_2LEVEL_TYPES_H + +#include <asm/types.h> + +typedef u32 pteval_t; +typedef u32 pmdval_t; + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { pteval_t pte; } pte_t; +typedef struct { pmdval_t pmd; } pmd_t; +typedef struct { pmdval_t pgd[2]; } pgd_t; +typedef struct { pteval_t pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd[0]) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef pteval_t pte_t; +typedef pmdval_t pmd_t; +typedef pmdval_t pgd_t[2]; +typedef pteval_t pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) ((x)[0]) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* _ASM_PGTABLE_2LEVEL_TYPES_H */ diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h new file mode 100644 index 00000000000..470457e1cfc --- /dev/null +++ b/arch/arm/include/asm/pgtable-2level.h @@ -0,0 +1,143 @@ +/* + * arch/arm/include/asm/pgtable-2level.h + * + * Copyright (C) 1995-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_PGTABLE_2LEVEL_H +#define _ASM_PGTABLE_2LEVEL_H + +/* + * Hardware-wise, we have a two level page table structure, where the first + * level has 4096 entries, and the second level has 256 entries. Each entry + * is one 32-bit word. Most of the bits in the second level entry are used + * by hardware, and there aren't any "accessed" and "dirty" bits. + * + * Linux on the other hand has a three level page table structure, which can + * be wrapped to fit a two level page table structure easily - using the PGD + * and PTE only. However, Linux also expects one "PTE" table per page, and + * at least a "dirty" bit. + * + * Therefore, we tweak the implementation slightly - we tell Linux that we + * have 2048 entries in the first level, each of which is 8 bytes (iow, two + * hardware pointers to the second level.) The second level contains two + * hardware PTE tables arranged contiguously, preceded by Linux versions + * which contain the state information Linux needs. We, therefore, end up + * with 512 entries in the "PTE" level. + * + * This leads to the page tables having the following layout: + * + * pgd pte + * | | + * +--------+ + * | | +------------+ +0 + * +- - - - + | Linux pt 0 | + * | | +------------+ +1024 + * +--------+ +0 | Linux pt 1 | + * | |-----> +------------+ +2048 + * +- - - - + +4 | h/w pt 0 | + * | |-----> +------------+ +3072 + * +--------+ +8 | h/w pt 1 | + * | | +------------+ +4096 + * + * See L_PTE_xxx below for definitions of bits in the "Linux pt", and + * PTE_xxx for definitions of bits appearing in the "h/w pt". + * + * PMD_xxx definitions refer to bits in the first level page table. + * + * The "dirty" bit is emulated by only granting hardware write permission + * iff the page is marked "writable" and "dirty" in the Linux PTE. This + * means that a write to a clean page will cause a permission fault, and + * the Linux MM layer will mark the page dirty via handle_pte_fault(). + * For the hardware to notice the permission change, the TLB entry must + * be flushed, and ptep_set_access_flags() does that for us. + * + * The "accessed" or "young" bit is emulated by a similar method; we only + * allow accesses to the page if the "young" bit is set. Accesses to the + * page will cause a fault, and handle_pte_fault() will set the young bit + * for us as long as the page is marked present in the corresponding Linux + * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is + * up to date. + * + * However, when the "young" bit is cleared, we deny access to the page + * by clearing the hardware PTE. Currently Linux does not flush the TLB + * for us in this case, which means the TLB will retain the transation + * until either the TLB entry is evicted under pressure, or a context + * switch which changes the user space mapping occurs. + */ +#define PTRS_PER_PTE 512 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PGD 2048 + +#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) +#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) +#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PMD_SHIFT 21 +#define PGDIR_SHIFT 21 + +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* + * section address mask and size definitions. + */ +#define SECTION_SHIFT 20 +#define SECTION_SIZE (1UL << SECTION_SHIFT) +#define SECTION_MASK (~(SECTION_SIZE-1)) + +/* + * ARMv6 supersection address mask and size definitions. + */ +#define SUPERSECTION_SHIFT 24 +#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) +#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) + +#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) + +/* + * "Linux" PTE definitions. + * + * We keep two sets of PTEs - the hardware and the linux version. + * This allows greater flexibility in the way we map the Linux bits + * onto the hardware tables, and allows us to have YOUNG and DIRTY + * bits. + * + * The PTE table pointer refers to the hardware entries; the "Linux" + * entries are stored 1024 bytes below. + */ +#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) +#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) +#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) +#define L_PTE_USER (_AT(pteval_t, 1) << 8) +#define L_PTE_XN (_AT(pteval_t, 1) << 9) +#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ + +/* + * These are the memory types, defined to be compatible with + * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB + */ +#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ +#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ +#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ +#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ +#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ +#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ +#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ +#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ +#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ +#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ +#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) + +#endif /* _ASM_PGTABLE_2LEVEL_H */ diff --git a/arch/arm/include/asm/pgtable-hwdef.h b/arch/arm/include/asm/pgtable-hwdef.h index fd1521d5cb9..183111164ce 100644 --- a/arch/arm/include/asm/pgtable-hwdef.h +++ b/arch/arm/include/asm/pgtable-hwdef.h @@ -10,81 +10,6 @@ #ifndef _ASMARM_PGTABLE_HWDEF_H #define _ASMARM_PGTABLE_HWDEF_H -/* - * Hardware page table definitions. - * - * + Level 1 descriptor (PMD) - * - common - */ -#define PMD_TYPE_MASK (3 << 0) -#define PMD_TYPE_FAULT (0 << 0) -#define PMD_TYPE_TABLE (1 << 0) -#define PMD_TYPE_SECT (2 << 0) -#define PMD_BIT4 (1 << 4) -#define PMD_DOMAIN(x) ((x) << 5) -#define PMD_PROTECTION (1 << 9) /* v5 */ -/* - * - section - */ -#define PMD_SECT_BUFFERABLE (1 << 2) -#define PMD_SECT_CACHEABLE (1 << 3) -#define PMD_SECT_XN (1 << 4) /* v6 */ -#define PMD_SECT_AP_WRITE (1 << 10) -#define PMD_SECT_AP_READ (1 << 11) -#define PMD_SECT_TEX(x) ((x) << 12) /* v5 */ -#define PMD_SECT_APX (1 << 15) /* v6 */ -#define PMD_SECT_S (1 << 16) /* v6 */ -#define PMD_SECT_nG (1 << 17) /* v6 */ -#define PMD_SECT_SUPER (1 << 18) /* v6 */ - -#define PMD_SECT_UNCACHED (0) -#define PMD_SECT_BUFFERED (PMD_SECT_BUFFERABLE) -#define PMD_SECT_WT (PMD_SECT_CACHEABLE) -#define PMD_SECT_WB (PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_MINICACHE (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE) -#define PMD_SECT_WBWA (PMD_SECT_TEX(1) | PMD_SECT_CACHEABLE | PMD_SECT_BUFFERABLE) -#define PMD_SECT_NONSHARED_DEV (PMD_SECT_TEX(2)) - -/* - * - coarse table (not used) - */ - -/* - * + Level 2 descriptor (PTE) - * - common - */ -#define PTE_TYPE_MASK (3 << 0) -#define PTE_TYPE_FAULT (0 << 0) -#define PTE_TYPE_LARGE (1 << 0) -#define PTE_TYPE_SMALL (2 << 0) -#define PTE_TYPE_EXT (3 << 0) /* v5 */ -#define PTE_BUFFERABLE (1 << 2) -#define PTE_CACHEABLE (1 << 3) - -/* - * - extended small page/tiny page - */ -#define PTE_EXT_XN (1 << 0) /* v6 */ -#define PTE_EXT_AP_MASK (3 << 4) -#define PTE_EXT_AP0 (1 << 4) -#define PTE_EXT_AP1 (2 << 4) -#define PTE_EXT_AP_UNO_SRO (0 << 4) -#define PTE_EXT_AP_UNO_SRW (PTE_EXT_AP0) -#define PTE_EXT_AP_URO_SRW (PTE_EXT_AP1) -#define PTE_EXT_AP_URW_SRW (PTE_EXT_AP1|PTE_EXT_AP0) -#define PTE_EXT_TEX(x) ((x) << 6) /* v5 */ -#define PTE_EXT_APX (1 << 9) /* v6 */ -#define PTE_EXT_COHERENT (1 << 9) /* XScale3 */ -#define PTE_EXT_SHARED (1 << 10) /* v6 */ -#define PTE_EXT_NG (1 << 11) /* v6 */ - -/* - * - small page - */ -#define PTE_SMALL_AP_MASK (0xff << 4) -#define PTE_SMALL_AP_UNO_SRO (0x00 << 4) -#define PTE_SMALL_AP_UNO_SRW (0x55 << 4) -#define PTE_SMALL_AP_URO_SRW (0xaa << 4) -#define PTE_SMALL_AP_URW_SRW (0xff << 4) +#include <asm/pgtable-2level-hwdef.h> #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5750704e027..8ade1840c6f 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -24,6 +24,8 @@ #include <mach/vmalloc.h> #include <asm/pgtable-hwdef.h> +#include <asm/pgtable-2level.h> + /* * Just any arbitrary offset to the start of the vmalloc VM area: the * current 8MB value just means that there will be a 8MB "hole" after the @@ -41,79 +43,6 @@ #define VMALLOC_START (((unsigned long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)) #endif -/* - * Hardware-wise, we have a two level page table structure, where the first - * level has 4096 entries, and the second level has 256 entries. Each entry - * is one 32-bit word. Most of the bits in the second level entry are used - * by hardware, and there aren't any "accessed" and "dirty" bits. - * - * Linux on the other hand has a three level page table structure, which can - * be wrapped to fit a two level page table structure easily - using the PGD - * and PTE only. However, Linux also expects one "PTE" table per page, and - * at least a "dirty" bit. - * - * Therefore, we tweak the implementation slightly - we tell Linux that we - * have 2048 entries in the first level, each of which is 8 bytes (iow, two - * hardware pointers to the second level.) The second level contains two - * hardware PTE tables arranged contiguously, preceded by Linux versions - * which contain the state information Linux needs. We, therefore, end up - * with 512 entries in the "PTE" level. - * - * This leads to the page tables having the following layout: - * - * pgd pte - * | | - * +--------+ - * | | +------------+ +0 - * +- - - - + | Linux pt 0 | - * | | +------------+ +1024 - * +--------+ +0 | Linux pt 1 | - * | |-----> +------------+ +2048 - * +- - - - + +4 | h/w pt 0 | - * | |-----> +------------+ +3072 - * +--------+ +8 | h/w pt 1 | - * | | +------------+ +4096 - * - * See L_PTE_xxx below for definitions of bits in the "Linux pt", and - * PTE_xxx for definitions of bits appearing in the "h/w pt". - * - * PMD_xxx definitions refer to bits in the first level page table. - * - * The "dirty" bit is emulated by only granting hardware write permission - * iff the page is marked "writable" and "dirty" in the Linux PTE. This - * means that a write to a clean page will cause a permission fault, and - * the Linux MM layer will mark the page dirty via handle_pte_fault(). - * For the hardware to notice the permission change, the TLB entry must - * be flushed, and ptep_set_access_flags() does that for us. - * - * The "accessed" or "young" bit is emulated by a similar method; we only - * allow accesses to the page if the "young" bit is set. Accesses to the - * page will cause a fault, and handle_pte_fault() will set the young bit - * for us as long as the page is marked present in the corresponding Linux - * PTE entry. Again, ptep_set_access_flags() will ensure that the TLB is - * up to date. - * - * However, when the "young" bit is cleared, we deny access to the page - * by clearing the hardware PTE. Currently Linux does not flush the TLB - * for us in this case, which means the TLB will retain the transation - * until either the TLB entry is evicted under pressure, or a context - * switch which changes the user space mapping occurs. - */ -#define PTRS_PER_PTE 512 -#define PTRS_PER_PMD 1 -#define PTRS_PER_PGD 2048 - -#define PTE_HWTABLE_PTRS (PTRS_PER_PTE) -#define PTE_HWTABLE_OFF (PTE_HWTABLE_PTRS * sizeof(pte_t)) -#define PTE_HWTABLE_SIZE (PTRS_PER_PTE * sizeof(u32)) - -/* - * PMD_SHIFT determines the size of the area a second-level page table can map - * PGDIR_SHIFT determines what a third-level page table entry can map - */ -#define PMD_SHIFT 21 -#define PGDIR_SHIFT 21 - #define LIBRARY_TEXT_START 0x0c000000 #ifndef __ASSEMBLY__ @@ -124,12 +53,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); #define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte) #define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd) #define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd) -#endif /* !__ASSEMBLY__ */ - -#define PMD_SIZE (1UL << PMD_SHIFT) -#define PMD_MASK (~(PMD_SIZE-1)) -#define PGDIR_SIZE (1UL << PGDIR_SHIFT) -#define PGDIR_MASK (~(PGDIR_SIZE-1)) /* * This is the lowest virtual address we can permit any user space @@ -138,60 +61,6 @@ extern void __pgd_error(const char *file, int line, pgd_t); */ #define FIRST_USER_ADDRESS PAGE_SIZE -#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE) - -/* - * section address mask and size definitions. - */ -#define SECTION_SHIFT 20 -#define SECTION_SIZE (1UL << SECTION_SHIFT) -#define SECTION_MASK (~(SECTION_SIZE-1)) - -/* - * ARMv6 supersection address mask and size definitions. - */ -#define SUPERSECTION_SHIFT 24 -#define SUPERSECTION_SIZE (1UL << SUPERSECTION_SHIFT) -#define SUPERSECTION_MASK (~(SUPERSECTION_SIZE-1)) - -/* - * "Linux" PTE definitions. - * - * We keep two sets of PTEs - the hardware and the linux version. - * This allows greater flexibility in the way we map the Linux bits - * onto the hardware tables, and allows us to have YOUNG and DIRTY - * bits. - * - * The PTE table pointer refers to the hardware entries; the "Linux" - * entries are stored 1024 bytes below. - */ -#define L_PTE_PRESENT (_AT(pteval_t, 1) << 0) -#define L_PTE_YOUNG (_AT(pteval_t, 1) << 1) -#define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 6) -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) -#define L_PTE_USER (_AT(pteval_t, 1) << 8) -#define L_PTE_XN (_AT(pteval_t, 1) << 9) -#define L_PTE_SHARED (_AT(pteval_t, 1) << 10) /* shared(v6), coherent(xsc3) */ - -/* - * These are the memory types, defined to be compatible with - * pre-ARMv6 CPUs cacheable and bufferable bits: XXCB - */ -#define L_PTE_MT_UNCACHED (_AT(pteval_t, 0x00) << 2) /* 0000 */ -#define L_PTE_MT_BUFFERABLE (_AT(pteval_t, 0x01) << 2) /* 0001 */ -#define L_PTE_MT_WRITETHROUGH (_AT(pteval_t, 0x02) << 2) /* 0010 */ -#define L_PTE_MT_WRITEBACK (_AT(pteval_t, 0x03) << 2) /* 0011 */ -#define L_PTE_MT_MINICACHE (_AT(pteval_t, 0x06) << 2) /* 0110 (sa1100, xscale) */ -#define L_PTE_MT_WRITEALLOC (_AT(pteval_t, 0x07) << 2) /* 0111 */ -#define L_PTE_MT_DEV_SHARED (_AT(pteval_t, 0x04) << 2) /* 0100 */ -#define L_PTE_MT_DEV_NONSHARED (_AT(pteval_t, 0x0c) << 2) /* 1100 */ -#define L_PTE_MT_DEV_WC (_AT(pteval_t, 0x09) << 2) /* 1001 */ -#define L_PTE_MT_DEV_CACHED (_AT(pteval_t, 0x0b) << 2) /* 1011 */ -#define L_PTE_MT_MASK (_AT(pteval_t, 0x0f) << 2) - -#ifndef __ASSEMBLY__ - /* * The pgprot_* and protection_map entries will be fixed up in runtime * to include the cachable and bufferable bits based on memory policy, @@ -327,10 +196,10 @@ extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; static inline pte_t *pmd_page_vaddr(pmd_t pmd) { - return __va(pmd_val(pmd) & PAGE_MASK); + return __va(pmd_val(pmd) & PHYS_MASK & (s32)PAGE_MASK); } -#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK)) /* we don't need complex calculations here as the pmd is folded into the pgd */ #define pmd_addr_end(addr,end) (end) @@ -351,7 +220,7 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_offset_map(pmd,addr) (__pte_map(pmd) + pte_index(addr)) #define pte_unmap(pte) __pte_unmap(pte) -#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_pfn(pte) ((pte_val(pte) & PHYS_MASK) >> PAGE_SHIFT) #define pfn_pte(pfn,prot) __pte(__pfn_to_phys(pfn) | pgprot_val(prot)) #define pte_page(pte) pfn_to_page(pte_pfn(pte)) diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index e42d96a45d3..0a17b62538c 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -33,6 +33,11 @@ extern void show_ipi_list(struct seq_file *, int); asmlinkage void do_IPI(int ipinr, struct pt_regs *regs); /* + * Called from C code, this handles an IPI. + */ +void handle_IPI(int ipinr, struct pt_regs *regs); + +/* * Setup the set of possible CPUs (via set_cpu_possible) */ extern void smp_init_cpus(void); @@ -66,6 +71,12 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 832888d0c20..ed6b0499a10 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -62,13 +62,6 @@ #include <asm/outercache.h> -#define __exception __attribute__((section(".exception.text"))) -#ifdef CONFIG_FUNCTION_GRAPH_TRACER -#define __exception_irq_entry __irq_entry -#else -#define __exception_irq_entry __exception -#endif - struct thread_info; struct task_struct; diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 8077145698f..02b2f820398 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -471,7 +471,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) * these operations. This is typically used when we are removing * PMD entries. */ -static inline void flush_pmd_entry(pmd_t *pmd) +static inline void flush_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; @@ -487,7 +487,7 @@ static inline void flush_pmd_entry(pmd_t *pmd) dsb(); } -static inline void clean_pmd_entry(pmd_t *pmd) +static inline void clean_pmd_entry(void *pmd) { const unsigned int __tlb_flag = __cpu_tlb_flags; diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h index accbd7cad9b..a7e457ed27c 100644 --- a/arch/arm/include/asm/topology.h +++ b/arch/arm/include/asm/topology.h @@ -1,6 +1,39 @@ #ifndef _ASM_ARM_TOPOLOGY_H #define _ASM_ARM_TOPOLOGY_H +#ifdef CONFIG_ARM_CPU_TOPOLOGY + +#include <linux/cpumask.h> + +struct cputopo_arm { + int thread_id; + int core_id; + int socket_id; + cpumask_t thread_sibling; + cpumask_t core_sibling; +}; + +extern struct cputopo_arm cpu_topology[NR_CPUS]; + +#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_core_id(cpu) (cpu_topology[cpu].core_id) +#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling) + +#define mc_capable() (cpu_topology[0].socket_id != -1) +#define smt_capable() (cpu_topology[0].thread_id != -1) + +void init_cpu_topology(void); +void store_cpu_topology(unsigned int cpuid); +const struct cpumask *cpu_coregroup_mask(unsigned int cpu); + +#else + +static inline void init_cpu_topology(void) { } +static inline void store_cpu_topology(unsigned int cpuid) { } + +#endif + #include <asm-generic/topology.h> #endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index f7887dc53c1..68036eece34 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -29,7 +29,7 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o obj-$(CONFIG_PCI) += bios32.o isa.o -obj-$(CONFIG_PM_SLEEP) += sleep.o +obj-$(CONFIG_ARM_CPU_SUSPEND) += sleep.o obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o obj-$(CONFIG_SMP) += smp.o smp_tlb.o obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o @@ -66,6 +66,7 @@ obj-$(CONFIG_IWMMXT) += iwmmxt.o obj-$(CONFIG_CPU_HAS_PMU) += pmu.o obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt +obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o ifneq ($(CONFIG_ARCH_EBSA110),y) obj-y += io.o diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 16baba2e436..1429d8989fb 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -20,6 +20,7 @@ #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/procinfo.h> +#include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> /* @@ -92,6 +93,17 @@ int main(void) DEFINE(S_OLD_R0, offsetof(struct pt_regs, ARM_ORIG_r0)); DEFINE(S_FRAME_SIZE, sizeof(struct pt_regs)); BLANK(); +#ifdef CONFIG_CACHE_L2X0 + DEFINE(L2X0_R_PHY_BASE, offsetof(struct l2x0_regs, phy_base)); + DEFINE(L2X0_R_AUX_CTRL, offsetof(struct l2x0_regs, aux_ctrl)); + DEFINE(L2X0_R_TAG_LATENCY, offsetof(struct l2x0_regs, tag_latency)); + DEFINE(L2X0_R_DATA_LATENCY, offsetof(struct l2x0_regs, data_latency)); + DEFINE(L2X0_R_FILTER_START, offsetof(struct l2x0_regs, filter_start)); + DEFINE(L2X0_R_FILTER_END, offsetof(struct l2x0_regs, filter_end)); + DEFINE(L2X0_R_PREFETCH_CTRL, offsetof(struct l2x0_regs, prefetch_ctrl)); + DEFINE(L2X0_R_PWR_CTRL, offsetof(struct l2x0_regs, pwr_ctrl)); + BLANK(); +#endif #ifdef CONFIG_CPU_HAS_ASID DEFINE(MM_CONTEXT_ID, offsetof(struct mm_struct, context.id)); BLANK(); diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index d6df359408f..c0d9203fc75 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -412,6 +412,9 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n", bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis"); } +#ifdef CONFIG_HOTPLUG +EXPORT_SYMBOL(pcibios_fixup_bus); +#endif /* * Convert from Linux-centric to bus-centric addresses for bridge devices. @@ -431,6 +434,7 @@ pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, region->start = res->start - offset; region->end = res->end - offset; } +EXPORT_SYMBOL(pcibios_resource_to_bus); void __devinit pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, @@ -447,12 +451,7 @@ pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, res->start = region->start + offset; res->end = region->end + offset; } - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_fixup_bus); -EXPORT_SYMBOL(pcibios_resource_to_bus); EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif /* * Swizzle the device pin each time we cross a bridge. diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c index d16500110ee..4dd0edab6a6 100644 --- a/arch/arm/kernel/ecard.c +++ b/arch/arm/kernel/ecard.c @@ -237,7 +237,7 @@ static void ecard_init_pgtables(struct mm_struct *mm) memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (IO_SIZE / PGDIR_SIZE)); - src_pgd = pgd_offset(mm, EASI_BASE); + src_pgd = pgd_offset(mm, (unsigned long)EASI_BASE); dst_pgd = pgd_offset(mm, EASI_START); memcpy(dst_pgd, src_pgd, sizeof(pgd_t) * (EASI_SIZE / PGDIR_SIZE)); @@ -674,44 +674,37 @@ static int __init ecard_probeirqhw(void) #define ecard_probeirqhw() (0) #endif -#ifndef IO_EC_MEMC8_BASE -#define IO_EC_MEMC8_BASE 0 -#endif - -static unsigned int __ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) +static void __iomem *__ecard_address(ecard_t *ec, card_type_t type, card_speed_t speed) { - unsigned long address = 0; + void __iomem *address = NULL; int slot = ec->slot_no; if (ec->slot_no == 8) - return IO_EC_MEMC8_BASE; + return ECARD_MEMC8_BASE; ectcr &= ~(1 << slot); switch (type) { case ECARD_MEMC: if (slot < 4) - address = IO_EC_MEMC_BASE + (slot << 12); + address = ECARD_MEMC_BASE + (slot << 14); break; case ECARD_IOC: if (slot < 4) - address = IO_EC_IOC_BASE + (slot << 12); -#ifdef IO_EC_IOC4_BASE + address = ECARD_IOC_BASE + (slot << 14); else - address = IO_EC_IOC4_BASE + ((slot - 4) << 12); -#endif + address = ECARD_IOC4_BASE + ((slot - 4) << 14); if (address) - address += speed << 17; + address += speed << 19; break; -#ifdef IO_EC_EASI_BASE case ECARD_EASI: - address = IO_EC_EASI_BASE + (slot << 22); + address = ECARD_EASI_BASE + (slot << 24); if (speed == ECARD_FAST) ectcr |= 1 << slot; break; -#endif + default: break; } @@ -990,6 +983,7 @@ ecard_probe(int slot, card_type_t type) ecard_t **ecp; ecard_t *ec; struct ex_ecid cid; + void __iomem *addr; int i, rc; ec = ecard_alloc_card(type, slot); @@ -999,7 +993,7 @@ ecard_probe(int slot, card_type_t type) } rc = -ENODEV; - if ((ec->podaddr = __ecard_address(ec, type, ECARD_SYNC)) == 0) + if ((addr = __ecard_address(ec, type, ECARD_SYNC)) == NULL) goto nodev; cid.r_zero = 1; @@ -1019,7 +1013,7 @@ ecard_probe(int slot, card_type_t type) ec->cid.fiqmask = cid.r_fiqmask; ec->cid.fiqoff = ecard_gets24(cid.r_fiqoff); ec->fiqaddr = - ec->irqaddr = (void __iomem *)ioaddr(ec->podaddr); + ec->irqaddr = addr; if (ec->cid.is) { ec->irqmask = ec->cid.irqmask; @@ -1048,10 +1042,8 @@ ecard_probe(int slot, card_type_t type) set_irq_flags(ec->irq, IRQF_VALID); } -#ifdef IO_EC_MEMC8_BASE if (slot == 8) ec->irq = 11; -#endif #ifdef CONFIG_ARCH_RPC /* On RiscPC, only first two slots have DMA capability */ if (slot < 2) @@ -1097,9 +1089,7 @@ static int __init ecard_init(void) ecard_probe(slot, ECARD_IOC); } -#ifdef IO_EC_MEMC8_BASE ecard_probe(8, ECARD_IOC); -#endif irqhw = ecard_probeirqhw(); diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 742b6108a00..239703dbdf4 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -21,6 +21,7 @@ #include <asm/memory.h> #include <asm/thread_info.h> #include <asm/system.h> +#include <asm/pgtable.h> #ifdef CONFIG_DEBUG_LL #include <mach/debug-macro.S> @@ -38,11 +39,14 @@ #error KERNEL_RAM_VADDR must start at 0xXXXX8000 #endif +#define PG_DIR_SIZE 0x4000 +#define PMD_ORDER 2 + .globl swapper_pg_dir - .equ swapper_pg_dir, KERNEL_RAM_VADDR - 0x4000 + .equ swapper_pg_dir, KERNEL_RAM_VADDR - PG_DIR_SIZE .macro pgtbl, rd, phys - add \rd, \phys, #TEXT_OFFSET - 0x4000 + add \rd, \phys, #TEXT_OFFSET - PG_DIR_SIZE .endm #ifdef CONFIG_XIP_KERNEL @@ -148,11 +152,11 @@ __create_page_tables: pgtbl r4, r8 @ page table address /* - * Clear the 16K level 1 swapper page table + * Clear the swapper page table */ mov r0, r4 mov r3, #0 - add r6, r0, #0x4000 + add r6, r0, #PG_DIR_SIZE 1: str r3, [r0], #4 str r3, [r0], #4 str r3, [r0], #4 @@ -171,30 +175,30 @@ __create_page_tables: sub r0, r0, r3 @ virt->phys offset add r5, r5, r0 @ phys __enable_mmu add r6, r6, r0 @ phys __enable_mmu_end - mov r5, r5, lsr #20 - mov r6, r6, lsr #20 + mov r5, r5, lsr #SECTION_SHIFT + mov r6, r6, lsr #SECTION_SHIFT -1: orr r3, r7, r5, lsl #20 @ flags + kernel base - str r3, [r4, r5, lsl #2] @ identity mapping - teq r5, r6 - addne r5, r5, #1 @ next section - bne 1b +1: orr r3, r7, r5, lsl #SECTION_SHIFT @ flags + kernel base + str r3, [r4, r5, lsl #PMD_ORDER] @ identity mapping + cmp r5, r6 + addlo r5, r5, #1 @ next section + blo 1b /* * Now setup the pagetables for our kernel direct * mapped region. */ mov r3, pc - mov r3, r3, lsr #20 - orr r3, r7, r3, lsl #20 - add r0, r4, #(KERNEL_START & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]! + mov r3, r3, lsr #SECTION_SHIFT + orr r3, r7, r3, lsl #SECTION_SHIFT + add r0, r4, #(KERNEL_START & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #((KERNEL_START & 0x00f00000) >> SECTION_SHIFT) << PMD_ORDER]! ldr r6, =(KERNEL_END - 1) - add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r0, r0, #1 << PMD_ORDER + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 - add r3, r3, #1 << 20 - strls r3, [r0], #4 + add r3, r3, #1 << SECTION_SHIFT + strls r3, [r0], #1 << PMD_ORDER bls 1b #ifdef CONFIG_XIP_KERNEL @@ -203,11 +207,11 @@ __create_page_tables: */ add r3, r8, #TEXT_OFFSET orr r3, r3, r7 - add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> 18 - str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]! + add r0, r4, #(KERNEL_RAM_VADDR & 0xff000000) >> (SECTION_SHIFT - PMD_ORDER) + str r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> (SECTION_SHIFT - PMD_ORDER)]! ldr r6, =(_end - 1) add r0, r0, #4 - add r6, r4, r6, lsr #18 + add r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER) 1: cmp r0, r6 add r3, r3, #1 << 20 strls r3, [r0], #4 @@ -218,12 +222,12 @@ __create_page_tables: * Then map boot params address in r2 or * the first 1MB of ram if boot params address is not specified. */ - mov r0, r2, lsr #20 - movs r0, r0, lsl #20 + mov r0, r2, lsr #SECTION_SHIFT + movs r0, r0, lsl #SECTION_SHIFT moveq r0, r8 sub r3, r0, r8 add r3, r3, #PAGE_OFFSET - add r3, r4, r3, lsr #18 + add r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER) orr r6, r7, r0 str r6, [r3] @@ -236,21 +240,21 @@ __create_page_tables: */ addruart r7, r3 - mov r3, r3, lsr #20 - mov r3, r3, lsl #2 + mov r3, r3, lsr #SECTION_SHIFT + mov r3, r3, lsl #PMD_ORDER add r0, r4, r3 rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long) cmp r3, #0x0800 @ limit to 512MB movhi r3, #0x0800 add r6, r0, r3 - mov r3, r7, lsr #20 + mov r3, r7, lsr #SECTION_SHIFT ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags - orr r3, r7, r3, lsl #20 + orr r3, r7, r3, lsl #SECTION_SHIFT 1: str r3, [r0], #4 - add r3, r3, #1 << 20 - teq r0, r6 - bne 1b + add r3, r3, #1 << SECTION_SHIFT + cmp r0, r6 + blo 1b #else /* CONFIG_DEBUG_ICEDCC */ /* we don't need any serial debugging mappings for ICEDCC */ @@ -262,7 +266,7 @@ __create_page_tables: * If we're using the NetWinder or CATS, we also need to map * in the 16550-type serial port for the debug messages */ - add r0, r4, #0xff000000 >> 18 + add r0, r4, #0xff000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x7c000000 str r3, [r0] #endif @@ -272,10 +276,10 @@ __create_page_tables: * Similar reasons here - for debug. This is * only for Acorn RiscPC architectures. */ - add r0, r4, #0x02000000 >> 18 + add r0, r4, #0x02000000 >> (SECTION_SHIFT - PMD_ORDER) orr r3, r7, #0x02000000 str r3, [r0] - add r0, r4, #0xd8000000 >> 18 + add r0, r4, #0xd8000000 >> (SECTION_SHIFT - PMD_ORDER) str r3, [r0] #endif #endif @@ -488,13 +492,8 @@ __fixup_pv_table: add r5, r5, r3 @ adjust table end address add r7, r7, r3 @ adjust __pv_phys_offset address str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset -#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT mov r6, r3, lsr #24 @ constant for add/sub instructions teq r3, r6, lsl #24 @ must be 16MiB aligned -#else - mov r6, r3, lsr #16 @ constant for add/sub instructions - teq r3, r6, lsl #16 @ must be 64kiB aligned -#endif THUMB( it ne @ cross section branch ) bne __error str r6, [r7, #4] @ save to __pv_offset @@ -510,20 +509,8 @@ ENDPROC(__fixup_pv_table) .text __fixup_a_pv_table: #ifdef CONFIG_THUMB2_KERNEL -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - lsls r0, r6, #24 - lsr r6, #8 - beq 1f - clz r7, r0 - lsr r0, #24 - lsl r0, r7 - bic r0, 0x0080 - lsrs r7, #1 - orrcs r0, #0x0080 - orr r0, r0, r7, lsl #12 -#endif -1: lsls r6, #24 - beq 4f + lsls r6, #24 + beq 2f clz r7, r6 lsr r6, #24 lsl r6, r7 @@ -532,43 +519,25 @@ __fixup_a_pv_table: orrcs r6, #0x0080 orr r6, r6, r7, lsl #12 orr r6, #0x4000 - b 4f -2: @ at this point the C flag is always clear - add r7, r3 -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - ldrh ip, [r7] - tst ip, 0x0400 @ the i bit tells us LS or MS byte - beq 3f - cmp r0, #0 @ set C flag, and ... - biceq ip, 0x0400 @ immediate zero value has a special encoding - streqh ip, [r7] @ that requires the i bit cleared -#endif -3: ldrh ip, [r7, #2] + b 2f +1: add r7, r3 + ldrh ip, [r7, #2] and ip, 0x8f00 - orrcc ip, r6 @ mask in offset bits 31-24 - orrcs ip, r0 @ mask in offset bits 23-16 + orr ip, r6 @ mask in offset bits 31-24 strh ip, [r7, #2] -4: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b bx lr #else -#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT - and r0, r6, #255 @ offset bits 23-16 - mov r6, r6, lsr #8 @ offset bits 31-24 -#else - mov r0, #0 @ just in case... -#endif - b 3f -2: ldr ip, [r7, r3] + b 2f +1: ldr ip, [r7, r3] bic ip, ip, #0x000000ff - tst ip, #0x400 @ rotate shift tells us LS or MS byte - orrne ip, ip, r6 @ mask in offset bits 31-24 - orreq ip, ip, r0 @ mask in offset bits 23-16 + orr ip, ip, r6 @ mask in offset bits 31-24 str ip, [r7, r3] -3: cmp r4, r5 +2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot - bcc 2b + bcc 1b mov pc, lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index de3dcab8610..53919b230e8 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -35,8 +35,8 @@ #include <linux/list.h> #include <linux/kallsyms.h> #include <linux/proc_fs.h> -#include <linux/ftrace.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index cc2020c2c70..1e9be5d25e5 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -33,7 +33,7 @@ * recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off. */ #undef MODULES_VADDR -#define MODULES_VADDR (((unsigned long)_etext + ~PGDIR_MASK) & PGDIR_MASK) +#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK) #endif #ifdef CONFIG_MMU diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d88ff0230e8..35417d0fb8a 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -16,7 +16,6 @@ #include <linux/cache.h> #include <linux/profile.h> #include <linux/errno.h> -#include <linux/ftrace.h> #include <linux/mm.h> #include <linux/err.h> #include <linux/cpu.h> @@ -31,6 +30,8 @@ #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> +#include <asm/exception.h> +#include <asm/topology.h> #include <asm/mmu_context.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -39,6 +40,7 @@ #include <asm/tlbflush.h> #include <asm/ptrace.h> #include <asm/localtimer.h> +#include <asm/smp_plat.h> /* * as from 2.5, kernels no longer have an init_tasks structure @@ -259,6 +261,20 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -268,6 +284,8 @@ static void __cpuinit smp_store_cpu_info(unsigned int cpuid) struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); cpu_info->loops_per_jiffy = loops_per_jiffy; + + store_cpu_topology(cpuid); } /* @@ -358,6 +376,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) { unsigned int ncores = num_possible_cpus(); + init_cpu_topology(); + smp_store_cpu_info(smp_processor_id()); /* @@ -460,6 +480,11 @@ static void ipi_timer(void) #ifdef CONFIG_LOCAL_TIMERS asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs) { + handle_local_timer(regs); +} + +void handle_local_timer(struct pt_regs *regs) +{ struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); @@ -567,6 +592,11 @@ static void ipi_cpu_stop(unsigned int cpu) */ asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs) { + handle_IPI(ipinr, regs); +} + +void handle_IPI(int ipinr, struct pt_regs *regs) +{ unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 7fcddb75c87..8f5dd796335 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -34,7 +34,7 @@ unsigned int __init scu_get_core_count(void __iomem *scu_base) /* * Enable the SCU */ -void __init scu_enable(void __iomem *scu_base) +void scu_enable(void __iomem *scu_base) { u32 scu_ctrl; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index cb634c3e28e..5a54b95d6bd 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -39,13 +39,11 @@ */ static struct sys_timer *system_timer; -#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) +#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \ + defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE) /* this needs a better home */ DEFINE_SPINLOCK(rtc_lock); - -#ifdef CONFIG_RTC_DRV_CMOS_MODULE EXPORT_SYMBOL(rtc_lock); -#endif #endif /* pc-style 'CMOS' RTC support */ /* change this if you have some constant time drift */ diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c new file mode 100644 index 00000000000..1040c00405d --- /dev/null +++ b/arch/arm/kernel/topology.c @@ -0,0 +1,148 @@ +/* + * arch/arm/kernel/topology.c + * + * Copyright (C) 2011 Linaro Limited. + * Written by: Vincent Guittot + * + * based on arch/sh/kernel/topology.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/cpu.h> +#include <linux/cpumask.h> +#include <linux/init.h> +#include <linux/percpu.h> +#include <linux/node.h> +#include <linux/nodemask.h> +#include <linux/sched.h> + +#include <asm/cputype.h> +#include <asm/topology.h> + +#define MPIDR_SMP_BITMASK (0x3 << 30) +#define MPIDR_SMP_VALUE (0x2 << 30) + +#define MPIDR_MT_BITMASK (0x1 << 24) + +/* + * These masks reflect the current use of the affinity levels. + * The affinity level can be up to 16 bits according to ARM ARM + */ + +#define MPIDR_LEVEL0_MASK 0x3 +#define MPIDR_LEVEL0_SHIFT 0 + +#define MPIDR_LEVEL1_MASK 0xF +#define MPIDR_LEVEL1_SHIFT 8 + +#define MPIDR_LEVEL2_MASK 0xFF +#define MPIDR_LEVEL2_SHIFT 16 + +struct cputopo_arm cpu_topology[NR_CPUS]; + +const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +{ + return &cpu_topology[cpu].core_sibling; +} + +/* + * store_cpu_topology is called at boot when only one cpu is running + * and with the mutex cpu_hotplug.lock locked, when several cpus have booted, + * which prevents simultaneous write access to cpu_topology array + */ +void store_cpu_topology(unsigned int cpuid) +{ + struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid]; + unsigned int mpidr; + unsigned int cpu; + + /* If the cpu topology has been already set, just return */ + if (cpuid_topo->core_id != -1) + return; + + mpidr = read_cpuid_mpidr(); + + /* create cpu topology mapping */ + if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) { + /* + * This is a multiprocessor system + * multiprocessor format & multiprocessor mode field are set + */ + + if (mpidr & MPIDR_MT_BITMASK) { + /* core performance interdependency */ + cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT) + & MPIDR_LEVEL2_MASK; + } else { + /* largely independent cores */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT) + & MPIDR_LEVEL0_MASK; + cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT) + & MPIDR_LEVEL1_MASK; + } + } else { + /* + * This is an uniprocessor system + * we are in multiprocessor format but uniprocessor system + * or in the old uniprocessor format + */ + cpuid_topo->thread_id = -1; + cpuid_topo->core_id = 0; + cpuid_topo->socket_id = -1; + } + + /* update core and thread sibling masks */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &cpu_topology[cpu]; + + if (cpuid_topo->socket_id == cpu_topo->socket_id) { + cpumask_set_cpu(cpuid, &cpu_topo->core_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->core_sibling); + + if (cpuid_topo->core_id == cpu_topo->core_id) { + cpumask_set_cpu(cpuid, + &cpu_topo->thread_sibling); + if (cpu != cpuid) + cpumask_set_cpu(cpu, + &cpuid_topo->thread_sibling); + } + } + } + smp_wmb(); + + printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n", + cpuid, cpu_topology[cpuid].thread_id, + cpu_topology[cpuid].core_id, + cpu_topology[cpuid].socket_id, mpidr); +} + +/* + * init_cpu_topology is called at boot when only one cpu is running + * which prevent simultaneous write access to cpu_topology array + */ +void init_cpu_topology(void) +{ + unsigned int cpu; + + /* init core mask */ + for_each_possible_cpu(cpu) { + struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]); + + cpu_topo->thread_id = -1; + cpu_topo->core_id = -1; + cpu_topo->socket_id = -1; + cpumask_clear(&cpu_topo->core_sibling); + cpumask_clear(&cpu_topo->thread_sibling); + } + smp_wmb(); +} diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index bc9f9da782c..210382555af 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -27,6 +27,7 @@ #include <linux/atomic.h> #include <asm/cacheflush.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/unistd.h> #include <asm/traps.h> diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 8b9b13649f8..025f742dd4d 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -17,6 +17,7 @@ #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ #include <linux/gfp.h> +#include <linux/highmem.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-ebsa110/include/mach/io.h b/arch/arm/mach-ebsa110/include/mach/io.h index f68daa632af..44679db672f 100644 --- a/arch/arm/mach-ebsa110/include/mach/io.h +++ b/arch/arm/mach-ebsa110/include/mach/io.h @@ -13,8 +13,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - u8 __inb8(unsigned int port); void __outb8(u8 val, unsigned int port); diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab99fa1..fc1f92dfbea 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -12,6 +12,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool select S3C_PL330_DMA + select ARM_CPU_SUSPEND if PM help Enable EXYNOS4210 CPU support diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index df6ef1b2f98..0c90896ad9a 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -193,12 +193,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "EXYNOS4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index 32e4cc397c2..15a70396c27 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -23,8 +23,6 @@ #define PCIO_SIZE 0x00100000 #define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) -#define IO_SPACE_LIMIT 0xffff - /* * Translation of various region addresses to virtual addresses */ diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h index f21bb5493dd..37beed3fa3e 100644 --- a/arch/arm/mach-integrator/include/mach/io.h +++ b/arch/arm/mach-integrator/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - /* * WARNING: this has to mirror definitions in platform.h */ diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 57b5410c31f..ffb9d6afb89 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -17,8 +17,6 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0x0000ffff - extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c index b7a84966b71..d1e4cc83b1e 100644 --- a/arch/arm/mach-msm/board-msm7x30.c +++ b/arch/arm/mach-msm/board-msm7x30.c @@ -24,6 +24,7 @@ #include <linux/smsc911x.h> #include <linux/usb/msm_hsusb.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,6 +43,21 @@ extern struct sys_timer msm_timer; +static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) { + tag->u.mem.start = 0; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm7x30_reserve(void) +{ + memblock_remove(0x0, SZ_2M); +} + static int hsusb_phy_init_seq[] = { 0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */ 0x02, 0x36, /* Disable CDR Auto Reset feature */ @@ -107,6 +123,8 @@ static void __init msm7x30_map_io(void) MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -115,6 +133,8 @@ MACHINE_END MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, @@ -123,6 +143,8 @@ MACHINE_END MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID") .boot_params = PLAT_PHYS_OFFSET + 0x100, + .fixup = msm7x30_fixup, + .reserve = msm7x30_reserve, .map_io = msm7x30_map_io, .init_irq = msm7x30_init_irq, .init_machine = msm7x30_init, diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 35c7ceeb3f2..b04468e7d00 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -20,16 +20,34 @@ #include <linux/io.h> #include <linux/irq.h> #include <linux/clkdev.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> #include "devices.h" +static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8960_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} + static void __init msm8960_map_io(void) { msm_map_msm8960_io(); @@ -76,6 +94,8 @@ static void __init msm8960_rumi3_init(void) } MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, @@ -83,6 +103,8 @@ MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR") MACHINE_END MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3") + .fixup = msm8960_fixup, + .reserve = msm8960_reserve, .map_io = msm8960_map_io, .init_irq = msm8960_init_irq, .timer = &msm_timer, diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 1163b6fd05d..9221f54778b 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -20,14 +20,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/hardware/gic.h> +#include <asm/setup.h> #include <mach/board.h> #include <mach/msm_iomap.h> +static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag, + char **cmdline, struct meminfo *mi) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM && + tag->u.mem.start == 0x40200000) { + tag->u.mem.start = 0x40000000; + tag->u.mem.size += SZ_2M; + } +} + +static void __init msm8x60_reserve(void) +{ + memblock_remove(0x40000000, SZ_2M); +} static void __init msm8x60_map_io(void) { @@ -65,6 +82,8 @@ static void __init msm8x60_init(void) } MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -72,6 +91,8 @@ MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3") MACHINE_END MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -79,6 +100,8 @@ MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF") MACHINE_END MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, @@ -86,6 +109,8 @@ MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR") MACHINE_END MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA") + .fixup = msm8x60_fixup, + .reserve = msm8x60_reserve, .map_io = msm8x60_map_io, .init_irq = msm8x60_init_irq, .init_machine = msm8x60_init, diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h index f2f8d299ba9..58d5e7eec43 100644 --- a/arch/arm/mach-msm/include/mach/memory.h +++ b/arch/arm/mach-msm/include/mach/memory.h @@ -22,11 +22,11 @@ #elif defined(CONFIG_ARCH_QSD8X50) #define PLAT_PHYS_OFFSET UL(0x20000000) #elif defined(CONFIG_ARCH_MSM7X30) -#define PLAT_PHYS_OFFSET UL(0x00200000) +#define PLAT_PHYS_OFFSET UL(0x00000000) #elif defined(CONFIG_ARCH_MSM8X60) -#define PLAT_PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #elif defined(CONFIG_ARCH_MSM8960) -#define PLAT_PHYS_OFFSET UL(0x40200000) +#define PLAT_PHYS_OFFSET UL(0x40000000) #else #define PLAT_PHYS_OFFSET UL(0x10000000) #endif diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 1a1af9e5625..72765952091 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -156,6 +156,12 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = get_core_count(); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 57b66d590c5..89bfb49389f 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -36,6 +36,7 @@ config ARCH_OMAP3 select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM + select ARM_CPU_SUSPEND if PM config ARCH_OMAP4 bool "TI OMAP4" @@ -50,6 +51,7 @@ config ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select USB_ARCH_HAS_EHCI + select ARM_CPU_SUSPEND if PM comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ce65e9329c7..889464dc7b2 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -109,12 +109,10 @@ void __init smp_init_cpus(void) ncores = scu_get_core_count(scu_base); /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "OMAP4: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index b09e848eb6c..ca607571782 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -19,6 +19,8 @@ #include <linux/io.h> #include <linux/irq.h> +#include <asm/exception.h> + #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 4ae943bafa9..e83c654a58d 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -52,12 +52,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "Realview: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-rpc/include/mach/hardware.h b/arch/arm/mach-rpc/include/mach/hardware.h index dde6b3c0e29..050d63c74cc 100644 --- a/arch/arm/mach-rpc/include/mach/hardware.h +++ b/arch/arm/mach-rpc/include/mach/hardware.h @@ -36,7 +36,7 @@ #define EASI_SIZE 0x08000000 /* EASI I/O */ #define EASI_START 0x08000000 -#define EASI_BASE 0xe5000000 +#define EASI_BASE IOMEM(0xe5000000) #define IO_START 0x03000000 /* I/O */ #define IO_SIZE 0x01000000 @@ -51,21 +51,20 @@ /* * IO Addresses */ -#define VIDC_BASE IOMEM(0xe0400000) -#define EXPMASK_BASE 0xe0360000 -#define IOMD_BASE IOMEM(0xe0200000) -#define IOC_BASE IOMEM(0xe0200000) -#define PCIO_BASE IOMEM(0xe0010000) -#define FLOPPYDMA_BASE IOMEM(0xe002a000) +#define ECARD_EASI_BASE (EASI_BASE) +#define VIDC_BASE (IO_BASE + 0x00400000) +#define EXPMASK_BASE (IO_BASE + 0x00360000) +#define ECARD_IOC4_BASE (IO_BASE + 0x00270000) +#define ECARD_IOC_BASE (IO_BASE + 0x00240000) +#define IOMD_BASE (IO_BASE + 0x00200000) +#define IOC_BASE (IO_BASE + 0x00200000) +#define ECARD_MEMC8_BASE (IO_BASE + 0x0002b000) +#define FLOPPYDMA_BASE (IO_BASE + 0x0002a000) +#define PCIO_BASE (IO_BASE + 0x00010000) +#define ECARD_MEMC_BASE (IO_BASE + 0x00000000) #define vidc_writel(val) __raw_writel(val, VIDC_BASE) -#define IO_EC_EASI_BASE 0x81400000 -#define IO_EC_IOC4_BASE 0x8009c000 -#define IO_EC_IOC_BASE 0x80090000 -#define IO_EC_MEMC8_BASE 0x8000ac00 -#define IO_EC_MEMC_BASE 0x80000000 - #define NETSLOT_BASE 0x0302b000 #define NETSLOT_SIZE 0x00001000 diff --git a/arch/arm/mach-rpc/include/mach/io.h b/arch/arm/mach-rpc/include/mach/io.h index 20da7f486e5..695f4ed2e11 100644 --- a/arch/arm/mach-rpc/include/mach/io.h +++ b/arch/arm/mach-rpc/include/mach/io.h @@ -15,195 +15,18 @@ #include <mach/hardware.h> -#define IO_SPACE_LIMIT 0xffffffff +#define IO_SPACE_LIMIT 0xffff /* - * We use two different types of addressing - PC style addresses, and ARM - * addresses. PC style accesses the PC hardware with the normal PC IO - * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ - * and are translated to the start of IO. Note that all addresses are - * shifted left! - */ -#define __PORT_PCIO(x) (!((x) & 0x80000000)) - -/* - * Dynamic IO functions. - */ -static inline void __outb (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "strb %1, [%0, %2, lsl #2] @ outb" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outw (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outw" - : "=&r" (temp) - : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -static inline void __outl (unsigned int value, unsigned int port) -{ - unsigned long temp; - __asm__ __volatile__( - "tst %2, #0x80000000\n\t" - "mov %0, %4\n\t" - "addeq %0, %0, %3\n\t" - "str %1, [%0, %2, lsl #2] @ outl" - : "=&r" (temp) - : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) - : "cc"); -} - -#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ -static inline unsigned sz __in##fnsuffix (unsigned int port) \ -{ \ - unsigned long temp, value; \ - __asm__ __volatile__( \ - "tst %2, #0x80000000\n\t" \ - "mov %0, %4\n\t" \ - "addeq %0, %0, %3\n\t" \ - "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ - : "=&r" (temp), "=r" (value) \ - : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ - : "cc"); \ - return (unsigned sz)value; \ -} - -static inline void __iomem *__deprecated __ioaddr(unsigned int port) -{ - void __iomem *ret; - if (__PORT_PCIO(port)) - ret = PCIO_BASE; - else - ret = IO_BASE; - return ret + (port << 2); -} - -#define DECLARE_IO(sz,fnsuffix,instr) \ - DECLARE_DYN_IN(sz,fnsuffix,instr) - -DECLARE_IO(char,b,"b") -DECLARE_IO(short,w,"") -DECLARE_IO(int,l,"") - -#undef DECLARE_IO -#undef DECLARE_DYN_IN - -/* - * Constant address IO functions + * We need PC style IO addressing for: + * - floppy (at 0x3f2,0x3f4,0x3f5,0x3f7) + * - parport (at 0x278-0x27a, 0x27b-0x27f, 0x778-0x77a) + * - 8250 serial (only for compile) * - * These have to be macros for the 'J' constraint to work - - * +/-4096 immediate operand. + * These peripherals are found in an area of MMIO which looks very much + * like an ISA bus, but with registers at the low byte of each word. */ -#define __outbc(value,port) \ -({ \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "strb %0, [%1, %2] @ outbc" \ - : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inbc(port) \ -({ \ - unsigned char result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldrb %0, [%1, %2] @ inbc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define __outwc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outwc" \ - : : "r" (__v|__v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inwc(port) \ -({ \ - unsigned short result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inwc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result & 0xffff; \ -}) - -#define __outlc(value,port) \ -({ \ - unsigned long __v = value; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "str %0, [%1, %2] @ outlc" \ - : : "r" (__v), "r" (IO_BASE), "r" ((port) << 2)); \ -}) - -#define __inlc(port) \ -({ \ - unsigned long result; \ - if (__PORT_PCIO((port))) \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ - else \ - __asm__ __volatile__( \ - "ldr %0, [%1, %2] @ inlc" \ - : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ - result; \ -}) - -#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) -#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) -#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) -#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) -#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) -#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) - -/* the following macro is deprecated */ -#define ioaddr(port) ((unsigned long)__ioaddr((port))) - -#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) -#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) - -#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) -#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define __io(a) (PCIO_BASE + ((a) << 2)) /* * 1:1 mapping for ioremapped regions. diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c index 580b3c73d2c..1e0e60d0462 100644 --- a/arch/arm/mach-rpc/riscpc.c +++ b/arch/arm/mach-rpc/riscpc.c @@ -74,7 +74,7 @@ static struct map_desc rpc_io_desc[] __initdata = { .length = IO_SIZE , .type = MT_DEVICE }, { /* EASI space */ - .virtual = EASI_BASE, + .virtual = (unsigned long)EASI_BASE, .pfn = __phys_to_pfn(EASI_START), .length = EASI_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-s3c2410/include/mach/io.h b/arch/arm/mach-s3c2410/include/mach/io.h index 9813dbf2ae4..118749f37c4 100644 --- a/arch/arm/mach-s3c2410/include/mach/io.h +++ b/arch/arm/mach-s3c2410/include/mach/io.h @@ -199,8 +199,6 @@ DECLARE_IO(int,l,"") #define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) #define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) #define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) -/* the following macro is deprecated */ -#define ioaddr(port) __ioaddr((port)) #define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) #define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) diff --git a/arch/arm/mach-sa1100/include/mach/io.h b/arch/arm/mach-sa1100/include/mach/io.h index d8b43f3dcd2..dfc27ff0834 100644 --- a/arch/arm/mach-sa1100/include/mach/io.h +++ b/arch/arm/mach-sa1100/include/mach/io.h @@ -10,11 +10,9 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - /* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... + * __io() is required to be an equivalent mapping to __mem_pci() for + * SOC_COMMON to work. */ #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index 66f980625a3..e4e485fa253 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -56,6 +56,12 @@ void __init smp_init_cpus(void) unsigned int ncores = shmobile_smp_get_core_count(); unsigned int i; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 0886cbccdde..7d2b5d03c1d 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -114,10 +114,10 @@ void __init smp_init_cpus(void) { unsigned int i, ncores = scu_get_core_count(scu_base); - if (ncores > NR_CPUS) { - printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a33df5f4c27..eb5199102cf 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -156,12 +156,10 @@ void __init smp_init_cpus(void) ncores = scu_base ? scu_get_core_count(scu_base) : 1; /* sanity check */ - if (ncores > NR_CPUS) { - printk(KERN_WARNING - "U8500: no. of cores (%d) greater than configured " - "maximum of %d - clipping\n", - ncores, NR_CPUS); - ncores = NR_CPUS; + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index bfd32f52c2d..2b1e836a76e 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -221,6 +221,12 @@ static void ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); + if (ncores > nr_cpu_ids) { + pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", + ncores, nr_cpu_ids); + ncores = nr_cpu_ids; + } + for (i = 0; i < ncores; ++i) set_cpu_possible(i, true); diff --git a/arch/arm/mach-vexpress/include/mach/io.h b/arch/arm/mach-vexpress/include/mach/io.h index 748bb524ee7..13522d86685 100644 --- a/arch/arm/mach-vexpress/include/mach/io.h +++ b/arch/arm/mach-vexpress/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffffffff - #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) diff --git a/arch/arm/mach-vt8500/include/mach/io.h b/arch/arm/mach-vt8500/include/mach/io.h index 9077239f78c..46181eecf27 100644 --- a/arch/arm/mach-vt8500/include/mach/io.h +++ b/arch/arm/mach-vt8500/include/mach/io.h @@ -20,8 +20,6 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#define IO_SPACE_LIMIT 0xffff - #define __io(a) __typesafe_io((a) + 0xf0000000) #define __mem_pci(a) (a) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index cfbcf8b9559..c335c76e0d8 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -86,16 +86,6 @@ core_param(alignment, ai_usermode, int, 0600); #define UM_FIXUP (1 << 1) #define UM_SIGNAL (1 << 2) -#ifdef CONFIG_PROC_FS -static const char *usermode_action[] = { - "ignored", - "warn", - "fixup", - "fixup+warn", - "signal", - "signal+warn" -}; - /* Return true if and only if the ARMv6 unaligned access model is in use. */ static bool cpu_is_v6_unaligned(void) { @@ -123,6 +113,16 @@ static int safe_usermode(int new_usermode, bool warn) return new_usermode; } +#ifdef CONFIG_PROC_FS +static const char *usermode_action[] = { + "ignored", + "warn", + "fixup", + "fixup+warn", + "signal", + "signal+warn" +}; + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 9ecfdb51195..3f9b9980478 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -16,9 +16,12 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#include <linux/err.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> @@ -30,11 +33,19 @@ static DEFINE_SPINLOCK(l2x0_lock); static uint32_t l2x0_way_mask; /* Bitmask of active ways */ static uint32_t l2x0_size; +struct l2x0_regs l2x0_saved_regs; + +struct l2x0_of_data { + void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*save)(void); + void (*resume)(void); +}; + static inline void cache_wait_way(void __iomem *reg, unsigned long mask) { /* wait for cache operation by line or way to complete */ while (readl_relaxed(reg) & mask) - ; + cpu_relax(); } #ifdef CONFIG_CACHE_PL310 @@ -277,7 +288,7 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } -static void __init l2x0_unlock(__u32 cache_id) +static void l2x0_unlock(__u32 cache_id) { int lockregs; int i; @@ -353,6 +364,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); + l2x0_saved_regs.aux_ctrl = aux; + l2x0_inv_all(); /* enable L2X0 */ @@ -372,3 +385,202 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", ways, cache_id, aux, l2x0_size); } + +#ifdef CONFIG_OF +static void __init l2x0_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[2] = { 0, 0 }; + u32 tag = 0; + u32 dirty = 0; + u32 val = 0, mask = 0; + + of_property_read_u32(np, "arm,tag-latency", &tag); + if (tag) { + mask |= L2X0_AUX_CTRL_TAG_LATENCY_MASK; + val |= (tag - 1) << L2X0_AUX_CTRL_TAG_LATENCY_SHIFT; + } + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1]) { + mask |= L2X0_AUX_CTRL_DATA_RD_LATENCY_MASK | + L2X0_AUX_CTRL_DATA_WR_LATENCY_MASK; + val |= ((data[0] - 1) << L2X0_AUX_CTRL_DATA_RD_LATENCY_SHIFT) | + ((data[1] - 1) << L2X0_AUX_CTRL_DATA_WR_LATENCY_SHIFT); + } + + of_property_read_u32(np, "arm,dirty-latency", &dirty); + if (dirty) { + mask |= L2X0_AUX_CTRL_DIRTY_LATENCY_MASK; + val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT; + } + + *aux_val &= ~mask; + *aux_val |= val; + *aux_mask &= ~mask; +} + +static void __init pl310_of_setup(const struct device_node *np, + __u32 *aux_val, __u32 *aux_mask) +{ + u32 data[3] = { 0, 0, 0 }; + u32 tag[3] = { 0, 0, 0 }; + u32 filter[2] = { 0, 0 }; + + of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag)); + if (tag[0] && tag[1] && tag[2]) + writel_relaxed( + ((tag[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((tag[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((tag[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_TAG_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,data-latency", + data, ARRAY_SIZE(data)); + if (data[0] && data[1] && data[2]) + writel_relaxed( + ((data[0] - 1) << L2X0_LATENCY_CTRL_RD_SHIFT) | + ((data[1] - 1) << L2X0_LATENCY_CTRL_WR_SHIFT) | + ((data[2] - 1) << L2X0_LATENCY_CTRL_SETUP_SHIFT), + l2x0_base + L2X0_DATA_LATENCY_CTRL); + + of_property_read_u32_array(np, "arm,filter-ranges", + filter, ARRAY_SIZE(filter)); + if (filter[1]) { + writel_relaxed(ALIGN(filter[0] + filter[1], SZ_1M), + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed((filter[0] & ~(SZ_1M - 1)) | L2X0_ADDR_FILTER_EN, + l2x0_base + L2X0_ADDR_FILTER_START); + } +} + +static void __init pl310_save(void) +{ + u32 l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + l2x0_saved_regs.tag_latency = readl_relaxed(l2x0_base + + L2X0_TAG_LATENCY_CTRL); + l2x0_saved_regs.data_latency = readl_relaxed(l2x0_base + + L2X0_DATA_LATENCY_CTRL); + l2x0_saved_regs.filter_end = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_END); + l2x0_saved_regs.filter_start = readl_relaxed(l2x0_base + + L2X0_ADDR_FILTER_START); + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + /* + * From r2p0, there is Prefetch offset/control register + */ + l2x0_saved_regs.prefetch_ctrl = readl_relaxed(l2x0_base + + L2X0_PREFETCH_CTRL); + /* + * From r3p0, there is Power control register + */ + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + l2x0_saved_regs.pwr_ctrl = readl_relaxed(l2x0_base + + L2X0_POWER_CTRL); + } +} + +static void l2x0_resume(void) +{ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore aux ctrl and enable l2 */ + l2x0_unlock(readl_relaxed(l2x0_base + L2X0_CACHE_ID)); + + writel_relaxed(l2x0_saved_regs.aux_ctrl, l2x0_base + + L2X0_AUX_CTRL); + + l2x0_inv_all(); + + writel_relaxed(1, l2x0_base + L2X0_CTRL); + } +} + +static void pl310_resume(void) +{ + u32 l2x0_revision; + + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* restore pl310 setup */ + writel_relaxed(l2x0_saved_regs.tag_latency, + l2x0_base + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.data_latency, + l2x0_base + L2X0_DATA_LATENCY_CTRL); + writel_relaxed(l2x0_saved_regs.filter_end, + l2x0_base + L2X0_ADDR_FILTER_END); + writel_relaxed(l2x0_saved_regs.filter_start, + l2x0_base + L2X0_ADDR_FILTER_START); + + l2x0_revision = readl_relaxed(l2x0_base + L2X0_CACHE_ID) & + L2X0_CACHE_ID_RTL_MASK; + + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R2P0) { + writel_relaxed(l2x0_saved_regs.prefetch_ctrl, + l2x0_base + L2X0_PREFETCH_CTRL); + if (l2x0_revision >= L2X0_CACHE_ID_RTL_R3P0) + writel_relaxed(l2x0_saved_regs.pwr_ctrl, + l2x0_base + L2X0_POWER_CTRL); + } + } + + l2x0_resume(); +} + +static const struct l2x0_of_data pl310_data = { + pl310_of_setup, + pl310_save, + pl310_resume, +}; + +static const struct l2x0_of_data l2x0_data = { + l2x0_of_setup, + NULL, + l2x0_resume, +}; + +static const struct of_device_id l2x0_ids[] __initconst = { + { .compatible = "arm,pl310-cache", .data = (void *)&pl310_data }, + { .compatible = "arm,l220-cache", .data = (void *)&l2x0_data }, + { .compatible = "arm,l210-cache", .data = (void *)&l2x0_data }, + {} +}; + +int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +{ + struct device_node *np; + struct l2x0_of_data *data; + struct resource res; + + np = of_find_matching_node(NULL, l2x0_ids); + if (!np) + return -ENODEV; + + if (of_address_to_resource(np, 0, &res)) + return -ENODEV; + + l2x0_base = ioremap(res.start, resource_size(&res)); + if (!l2x0_base) + return -ENOMEM; + + l2x0_saved_regs.phy_base = res.start; + + data = of_match_node(l2x0_ids, np)->data; + + /* L2 configuration can only be changed if the cache is disabled */ + if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + if (data->setup) + data->setup(np, &aux_val, &aux_mask); + } + + if (data->save) + data->save(); + + l2x0_init(l2x0_base, aux_val, aux_mask); + + outer_cache.resume = data->resume; + return 0; +} +#endif diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index c3ff82f92d9..235eb775fc7 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -123,8 +123,8 @@ static void __dma_free_buffer(struct page *page, size_t size) #endif #define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT) -#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT) -#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT) +#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PMD_SHIFT) +#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PMD_SHIFT) /* * These are the page tables (2MB each) covering uncached, DMA consistent allocations @@ -183,7 +183,7 @@ static int __init consistent_init(void) } consistent_pte[i++] = pte; - base += (1 << PGDIR_SHIFT); + base += PMD_SIZE; } while (base < CONSISTENT_END); return ret; diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 3b5ea68acbb..aa33949fef6 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -20,6 +20,7 @@ #include <linux/highmem.h> #include <linux/perf_event.h> +#include <asm/exception.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/tlbflush.h> diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 010566799c8..ad7cce3bc43 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -12,8 +12,8 @@ static inline pmd_t *pmd_off_k(unsigned long virt) struct mem_type { pteval_t prot_pte; - unsigned int prot_l1; - unsigned int prot_sect; + pmdval_t prot_l1; + pmdval_t prot_sect; unsigned int domain; }; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 594d677b92c..226f1804be1 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -60,7 +60,7 @@ EXPORT_SYMBOL(pgprot_kernel); struct cachepolicy { const char policy[16]; unsigned int cr_mask; - unsigned int pmd; + pmdval_t pmd; pteval_t pte; }; @@ -288,7 +288,7 @@ static void __init build_mem_type_table(void) { struct cachepolicy *cp; unsigned int cr = get_cr(); - unsigned int user_pgprot, kern_pgprot, vecs_pgprot; + pteval_t user_pgprot, kern_pgprot, vecs_pgprot; int cpu_arch = cpu_architecture(); int i; @@ -863,14 +863,14 @@ static inline void prepare_page_table(void) /* * Clear out all the mappings below the kernel image. */ - for (addr = 0; addr < MODULES_VADDR; addr += PGDIR_SIZE) + for (addr = 0; addr < MODULES_VADDR; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); #ifdef CONFIG_XIP_KERNEL /* The XIP kernel is mapped in the module area -- skip over it */ - addr = ((unsigned long)_etext + PGDIR_SIZE - 1) & PGDIR_MASK; + addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK; #endif - for ( ; addr < PAGE_OFFSET; addr += PGDIR_SIZE) + for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* @@ -885,10 +885,12 @@ static inline void prepare_page_table(void) * memory bank, up to the end of the vmalloc region. */ for (addr = __phys_to_virt(end); - addr < VMALLOC_END; addr += PGDIR_SIZE) + addr < VMALLOC_END; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); } +#define SWAPPER_PG_DIR_SIZE (PTRS_PER_PGD * sizeof(pgd_t)) + /* * Reserve the special regions of memory */ @@ -898,7 +900,7 @@ void __init arm_mm_memblock_reserve(void) * Reserve the page tables. These are already in use, * and can only be in node 0. */ - memblock_reserve(__pa(swapper_pg_dir), PTRS_PER_PGD * sizeof(pgd_t)); + memblock_reserve(__pa(swapper_pg_dir), SWAPPER_PG_DIR_SIZE); #ifdef CONFIG_SA1111 /* @@ -926,7 +928,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ vectors_page = early_alloc(PAGE_SIZE); - for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE) + for (addr = VMALLOC_END; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); /* diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 9049c0764db..9591c8e9fb8 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -218,7 +218,7 @@ ENDPROC(cpu_v7_set_pte_ext) /* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */ .globl cpu_v7_suspend_size .equ cpu_v7_suspend_size, 4 * 9 -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_ARM_CPU_SUSPEND ENTRY(cpu_v7_do_suspend) stmfd sp!, {r4 - r11, lr} mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index bb8f4a6b3e3..5b605a9eb09 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -14,6 +14,7 @@ config ARCH_OMAP1 select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP + select HAVE_IDE help "Systems based on omap7xx, omap15xx or omap16xx" diff --git a/arch/arm/vfp/Makefile b/arch/arm/vfp/Makefile index 6de73aab019..a81404c09d5 100644 --- a/arch/arm/vfp/Makefile +++ b/arch/arm/vfp/Makefile @@ -7,7 +7,7 @@ # ccflags-y := -DDEBUG # asflags-y := -DDEBUG -KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp) +KBUILD_AFLAGS :=$(KBUILD_AFLAGS:-msoft-float=-Wa,-mfpu=softvfp+vfp -mfloat-abi=soft) LDFLAGS +=--no-warn-mismatch obj-y += vfp.o |