diff options
Diffstat (limited to 'arch')
24 files changed, 492 insertions, 989 deletions
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d9af9811ded..ab7395d84bc 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id) * On 1510, 1610 and 1710, McBSP1 and McBSP3 * are DSP public peripherals. */ - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (id == 0 || id == 2) { if (dsp_use++ == 0) { api_clk = clk_get(NULL, "api_ck"); dsp_clk = clk_get(NULL, "dsp_ck"); @@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id) static void omap1_mcbsp_free(unsigned int id) { - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (id == 0 || id == 2) { if (--dsp_use == 0) { if (!IS_ERR(api_clk)) { clk_disable(api_clk); diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index adbe82d72d4..ff1466fbf5c 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -269,4 +269,4 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) -obj-y += common-board-devices.o +obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 12fae21346c..bd600cfb7f8 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void) omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); } -static int sdp3430_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data sdp3430_bci_data = { - .battery_tmp_tbl = sdp3430_batt_table, - .tblsize = ARRAY_SIZE(sdp3430_batt_table), -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = { .setup = sdp3430_twl_gpio_setup, }; -static struct twl4030_usb_data sdp3430_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_madc_platform_data sdp3430_madc_data = { - .irq_line = 1, -}; - /* regulator consumer mappings */ /* ads7846 on SPI */ @@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = { .consumer_supplies = sdp3430_vsim_supplies, }; -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data sdp3430_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), - .consumer_supplies = sdp3430_vdda_dac_supplies, -}; - -static struct regulator_init_data sdp3430_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), - .consumer_supplies = sdp3430_vpll2_supplies, -}; - -static struct twl4030_codec_audio_data sdp3430_audio; - -static struct twl4030_codec_data sdp3430_codec = { - .audio_mclk = 26000000, - .audio = &sdp3430_audio, -}; - static struct twl4030_platform_data sdp3430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &sdp3430_bci_data, .gpio = &sdp3430_gpio_data, - .madc = &sdp3430_madc_data, .keypad = &sdp3430_kp_data, - .usb = &sdp3430_usb_data, - .codec = &sdp3430_codec, .vaux1 = &sdp3430_vaux1, .vaux2 = &sdp3430_vaux2, @@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = { .vmmc1 = &sdp3430_vmmc1, .vmmc2 = &sdp3430_vmmc2, .vsim = &sdp3430_vsim, - .vdac = &sdp3430_vdac, - .vpll2 = &sdp3430_vpll2, }; static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ + omap3_pmic_get_config(&sdp3430_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + sdp3430_twldata.vdac->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &sdp3430_twldata); + /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index f6efff5f165..a7c0b31fd08 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -372,14 +372,6 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct twl4030_usb_data omap4_usbphy_data = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 2, @@ -411,10 +403,6 @@ static struct regulator_consumer_supply sdp4430_vaux_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; -static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = { .supply = "vmmc", .dev_name = "omap_hsmmc.4", @@ -504,61 +492,6 @@ static struct regulator_init_data sdp4430_vaux1 = { .consumer_supplies = sdp4430_vaux_supply, }; -static struct regulator_init_data sdp4430_vaux2 = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vaux3 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VMMC1 for MMC1 card */ -static struct regulator_init_data sdp4430_vmmc = { - .constraints = { - .min_uV = 1200000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = sdp4430_vmmc_supply, -}; - -static struct regulator_init_data sdp4430_vpp = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2500000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data sdp4430_vusim = { .constraints = { .min_uV = 1200000, @@ -572,75 +505,10 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct regulator_init_data sdp4430_vana = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vcxio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vusb = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_clk32kg = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .always_on = true, - }, -}; - static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, - /* Regulators */ - .vmmc = &sdp4430_vmmc, - .vpp = &sdp4430_vpp, .vusim = &sdp4430_vusim, - .vana = &sdp4430_vana, - .vcxio = &sdp4430_vcxio, - .vdac = &sdp4430_vdac, - .vusb = &sdp4430_vusb, .vaux1 = &sdp4430_vaux1, - .vaux2 = &sdp4430_vaux2, - .vaux3 = &sdp4430_vaux3, - .clk32kg = &sdp4430_clk32kg, - .usb = &omap4_usbphy_data }; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { @@ -658,6 +526,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { + omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_REGULATOR_VAUX2 | + TWL_COMMON_REGULATOR_VAUX3 | + TWL_COMMON_REGULATOR_VMMC | + TWL_COMMON_REGULATOR_VPP | + TWL_COMMON_REGULATOR_VANA | + TWL_COMMON_REGULATOR_VCXIO | + TWL_COMMON_REGULATOR_VUSB | + TWL_COMMON_REGULATOR_CLK32KG); omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index fcd403224f9..3af8aab435b 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -339,10 +339,6 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { REGULATOR_SUPPLY("vdvi", "omapdss"), }; @@ -377,39 +373,6 @@ static struct regulator_init_data cm_t35_vsim = { .consumer_supplies = cm_t35_vsim_supply, }; -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data cm_t35_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdac_supply), - .consumer_supplies = cm_t35_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data cm_t35_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(cm_t35_vdvi_supply), - .consumer_supplies = cm_t35_vdvi_supply, -}; - -static struct twl4030_usb_data cm_t35_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t cm_t35_keymap[] = { KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_LEFT), KEY(1, 0, KEY_UP), KEY(1, 1, KEY_ENTER), KEY(1, 2, KEY_DOWN), @@ -488,21 +451,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { }; static struct twl4030_platform_data cm_t35_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, - .usb = &cm_t35_usb_data, .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, - .vdac = &cm_t35_vdac, - .vpll2 = &cm_t35_vpll2, }; static void __init cm_t35_init_i2c(void) { + omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + cm_t35_twldata.vpll2->constraints.name = "VDVI"; + cm_t35_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(cm_t35_vdvi_supply); + cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply; + omap3_pmic_init("tps65930", &cm_t35_twldata); } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 949dbeabab2..b6002ec31c6 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -186,10 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -289,20 +285,6 @@ static struct regulator_init_data devkit8000_vmmc1 = { .consumer_supplies = devkit8000_vmmc1_supply, }; -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data devkit8000_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(devkit8000_vdda_dac_supply), - .consumer_supplies = devkit8000_vdda_dac_supply, -}; - /* VPLL1 for digital video outputs */ static struct regulator_init_data devkit8000_vpll1 = { .constraints = { @@ -332,27 +314,10 @@ static struct regulator_init_data devkit8000_vio = { .consumer_supplies = devkit8000_vio_supply, }; -static struct twl4030_usb_data devkit8000_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data devkit8000_audio_data; - -static struct twl4030_codec_data devkit8000_codec_data = { - .audio_mclk = 26000000, - .audio = &devkit8000_audio_data, -}; - static struct twl4030_platform_data devkit8000_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &devkit8000_usb_data, .gpio = &devkit8000_gpio_data, - .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, @@ -360,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = { static int __init devkit8000_i2c_init(void) { + omap3_pmic_get_config(&devkit8000_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC); omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index f683835f936..35be778caf1 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -443,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static int igep2_enable_dvi(struct omap_dss_device *dssdev) { gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); @@ -483,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct regulator_consumer_supply igep2_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data igep2_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), - .consumer_supplies = igep2_vpll2_supplies, -}; - static void __init igep2_display_init(void) { int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, @@ -522,13 +498,6 @@ static void __init igep_init_early(void) m65kxxxxam_sdrc_params); } -static struct twl4030_codec_audio_data igep2_audio_data; - -static struct twl4030_codec_data igep2_codec_data = { - .audio_mclk = 26000000, - .audio = &igep2_audio_data, -}; - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -561,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { }; static struct twl4030_platform_data igep_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &igep_usb_data, .gpio = &igep_twl4030_gpio_pdata, .vmmc1 = &igep_vmmc1, .vio = &igep_vio, @@ -581,6 +546,8 @@ static void __init igep_i2c_init(void) { int ret; + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0); + if (machine_is_igep0020()) { /* * Bus 3 is attached to the DVI port where devices like the @@ -591,9 +558,12 @@ static void __init igep_i2c_init(void) if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - igep_twldata.codec = &igep2_codec_data; igep_twldata.keypad = &igep2_keypad_pdata; - igep_twldata.vpll2 = &igep2_vpll2; + /* Get common pmic data */ + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VPLL2); + igep_twldata.vpll2->constraints.apply_uV = true; + igep_twldata.vpll2->constraints.name = "VDVI"; } omap3_pmic_init("twl4030", &igep_twldata); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 5d4328f19c0..218764c9377 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -199,20 +199,12 @@ static void __init omap_ldp_init_early(void) omap2_init_common_devices(NULL, NULL); } -static struct twl4030_usb_data ldp_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data ldp_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, }; -static struct twl4030_madc_platform_data ldp_madc_data = { - .irq_line = 1, -}; - static struct regulator_consumer_supply ldp_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = { }; static struct twl4030_platform_data ldp_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .madc = &ldp_madc_data, - .usb = &ldp_usb_data, .vmmc1 = &ldp_vmmc1, .vaux1 = &ldp_vaux1, .gpio = &ldp_gpio_data, @@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = { static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&ldp_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 78cf5f221f8..32f5f895568 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -236,15 +236,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct regulator_consumer_supply beagle_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -static struct regulator_consumer_supply beagle_vdvi_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static void __init beagle_display_init(void) { int r; @@ -371,58 +362,11 @@ static struct regulator_init_data beagle_vsim = { .consumer_supplies = beagle_vsim_supply, }; -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data beagle_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vdac_supply), - .consumer_supplies = beagle_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data beagle_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), - .consumer_supplies = beagle_vdvi_supplies, -}; - -static struct twl4030_usb_data beagle_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data beagle_audio_data; - -static struct twl4030_codec_data beagle_codec_data = { - .audio_mclk = 26000000, - .audio = &beagle_audio_data, -}; - static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &beagle_usb_data, .gpio = &beagle_gpio_data, - .codec = &beagle_codec_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, - .vdac = &beagle_vdac, - .vpll2 = &beagle_vpll2, }; static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { @@ -433,6 +377,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { + omap3_pmic_get_config(&beagle_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + beagle_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 57bce0f2e19..c452b3f3331 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -396,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = { .setup = omap3evm_twl_gpio_setup, }; -static struct twl4030_usb_data omap3evm_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -434,56 +430,6 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3evm_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3evm_audio_data; - -static struct twl4030_codec_data omap3evm_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3evm_audio_data, -}; - -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_evm_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vdda_dac_supply), - .consumer_supplies = omap3_evm_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_evm_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), - .consumer_supplies = omap3_evm_vpll2_supplies, -}; - /* ads7846 on SPI */ static struct regulator_consumer_supply omap3evm_vio_supply[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), @@ -547,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { #endif static struct twl4030_platform_data omap3evm_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, - .madc = &omap3evm_madc_data, - .usb = &omap3evm_usb_data, .gpio = &omap3evm_gpio_data, - .codec = &omap3evm_codec_data, - .vdac = &omap3_evm_vdac, - .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, .vmmc1 = &omap3evm_vmmc1, .vsim = &omap3evm_vsim, @@ -565,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = { static int __init omap3_evm_i2c_init(void) { + omap3_pmic_get_config(&omap3evm_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3evm_twldata.vdac->constraints.apply_uV = true; + omap3evm_twldata.vpll2->constraints.apply_uV = true; + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index d4ea9408560..080d7bd6795 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -332,10 +332,6 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), }; -static struct regulator_consumer_supply pandora_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), @@ -391,36 +387,6 @@ static struct regulator_init_data pandora_vmmc2 = { .consumer_supplies = pandora_vmmc2_supply, }; -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data pandora_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vdda_dac_supply), - .consumer_supplies = pandora_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data pandora_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies), - .consumer_supplies = pandora_vdds_supplies, -}; - /* VAUX1 for LCD */ static struct regulator_init_data pandora_vaux1 = { .constraints = { @@ -508,29 +474,12 @@ static struct platform_device pandora_vwlan_device = { }, }; -static struct twl4030_usb_data omap3pandora_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data omap3pandora_audio_data; - -static struct twl4030_codec_data omap3pandora_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3pandora_audio_data, -}; - static struct twl4030_bci_platform_data pandora_bci_data; static struct twl4030_platform_data omap3pandora_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, - .usb = &omap3pandora_usb_data, - .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, - .vdac = &pandora_vdac, - .vpll2 = &pandora_vpll2, .vaux1 = &pandora_vaux1, .vaux2 = &pandora_vaux2, .vaux4 = &pandora_vaux4, @@ -548,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { + omap3_pmic_get_config(&omap3pandora_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3pandora_twldata.vdac->constraints.apply_uV = true; + + omap3pandora_twldata.vpll2->constraints.apply_uV = true; + omap3pandora_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(pandora_vdds_supplies); + omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies; + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index b8ad4dd5bbb..8e104980ea2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -349,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { .setup = omap3stalker_twl_gpio_setup, }; -static struct twl4030_usb_data omap3stalker_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -387,69 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3stalker_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3stalker_audio_data; - -static struct twl4030_codec_data omap3stalker_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3stalker_audio_data, -}; - -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_stalker_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vdda_dac_supply), - .consumer_supplies = omap3_stalker_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_stalker_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), - .consumer_supplies = omap3_stalker_vpll2_supplies, -}; - static struct twl4030_platform_data omap3stalker_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, - .madc = &omap3stalker_madc_data, - .usb = &omap3stalker_usb_data, .gpio = &omap3stalker_gpio_data, - .codec = &omap3stalker_codec_data, - .vdac = &omap3_stalker_vdac, - .vpll2 = &omap3_stalker_vpll2, .vmmc1 = &omap3stalker_vmmc1, .vsim = &omap3stalker_vsim, }; @@ -470,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { + omap3_pmic_get_config(&omap3stalker_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3stalker_twldata.vdac->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 57e6ed34ebb..852ea046405 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -206,58 +206,11 @@ static struct regulator_init_data touchbook_vsim = { .consumer_supplies = touchbook_vsim_supply, }; -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data touchbook_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vdac_supply), - .consumer_supplies = touchbook_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data touchbook_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(touchbook_vdvi_supply), - .consumer_supplies = touchbook_vdvi_supply, -}; - -static struct twl4030_usb_data touchbook_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data touchbook_audio_data; - -static struct twl4030_codec_data touchbook_codec_data = { - .audio_mclk = 26000000, - .audio = &touchbook_audio_data, -}; - static struct twl4030_platform_data touchbook_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &touchbook_usb_data, .gpio = &touchbook_gpio_data, - .codec = &touchbook_codec_data, .vmmc1 = &touchbook_vmmc1, .vsim = &touchbook_vsim, - .vdac = &touchbook_vdac, - .vpll2 = &touchbook_vpll2, }; static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { @@ -269,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap3_pmic_init("twl4030", &touchbook_twldata); + omap3_pmic_get_config(&touchbook_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + touchbook_twldata.vdac->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdac_supply); + touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; + + touchbook_twldata.vpll2->constraints.name = "VDVI"; + touchbook_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdvi_supply); + touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; + + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, ARRAY_SIZE(touchBook_i2c_boardinfo)); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index ee2034e3746..9aaa9605766 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -154,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct twl4030_usb_data omap4_usbphy_data = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -181,10 +173,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"), }; @@ -269,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct regulator_init_data omap4_panda_vaux2 = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vaux3 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VMMC1 for MMC1 card */ -static struct regulator_init_data omap4_panda_vmmc = { - .constraints = { - .min_uV = 1200000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc_supply), - .consumer_supplies = omap4_panda_vmmc_supply, -}; - -static struct regulator_init_data omap4_panda_vpp = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2500000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vana = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vcxio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vusb = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_clk32kg = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct twl4030_platform_data omap4_panda_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, - - /* Regulators */ - .vmmc = &omap4_panda_vmmc, - .vpp = &omap4_panda_vpp, - .vana = &omap4_panda_vana, - .vcxio = &omap4_panda_vcxio, - .vdac = &omap4_panda_vdac, - .vusb = &omap4_panda_vusb, - .vaux2 = &omap4_panda_vaux2, - .vaux3 = &omap4_panda_vaux3, - .clk32kg = &omap4_panda_clk32kg, - .usb = &omap4_usbphy_data, -}; +/* Panda board uses the common PMIC configuration */ +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -404,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { + omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_REGULATOR_VAUX2 | + TWL_COMMON_REGULATOR_VAUX3 | + TWL_COMMON_REGULATOR_VMMC | + TWL_COMMON_REGULATOR_VPP | + TWL_COMMON_REGULATOR_VANA | + TWL_COMMON_REGULATOR_VCXIO | + TWL_COMMON_REGULATOR_VUSB | + TWL_COMMON_REGULATOR_CLK32KG); omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9883313bc07..f949a9954d7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -265,15 +265,6 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, }; -static struct regulator_consumer_supply overo_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .setup = overo_twl_gpio_setup, }; -static struct twl4030_usb_data overo_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct regulator_init_data overo_vmmc1 = { .constraints = { .min_uV = 1850000, @@ -451,55 +438,19 @@ static struct regulator_init_data overo_vmmc1 = { .consumer_supplies = overo_vmmc1_supply, }; -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data overo_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vdda_dac_supply), - .consumer_supplies = overo_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data overo_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), - .consumer_supplies = overo_vdds_dsi_supply, -}; - -static struct twl4030_codec_audio_data overo_audio_data; - -static struct twl4030_codec_data overo_codec_data = { - .audio_mclk = 26000000, - .audio = &overo_audio_data, -}; - static struct twl4030_platform_data overo_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, - .usb = &overo_usb_data, - .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, - .vdac = &overo_vdac, - .vpll2 = &overo_vpll2, }; static int __init overo_i2c_init(void) { + omap3_pmic_get_config(&overo_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + overo_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 54dceb16341..7dfed24ee12 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = { .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), }; -static struct twl4030_usb_data rm680_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_platform_data rm680_twl_data = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &rm680_gpio_data, - .usb = &rm680_usb_data, /* add rest of the children here */ }; static void __init rm680_i2c_init(void) { + omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 7d377542517..8946d7232f3 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -348,10 +348,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data rx51_madc_data = { - .irq_line = 1, -}; - /* Enable input logic and pull all lines up when eMMC is on. */ static struct omap_board_mux rx51_mmc2_on_mux[] = { OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), @@ -458,10 +454,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-0063"), }; -static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -604,21 +596,6 @@ static struct regulator_init_data rx51_vsim = { .consumer_supplies = rx51_vsim_supply, }; -static struct regulator_init_data rx51_vdac = { - .constraints = { - .name = "VDAC", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(rx51_vdac_supply), - .consumer_supplies = rx51_vdac_supply, -}; - static struct regulator_init_data rx51_vio = { .constraints = { .min_uV = 1800000, @@ -726,10 +703,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; -static struct twl4030_usb_data rx51_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_ins sleep_on_seq[] __initdata = { /* * Turn off everything @@ -901,14 +874,9 @@ struct twl4030_codec_data rx51_codec_data __initdata = { }; static struct twl4030_platform_data rx51_twldata __initdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, - .madc = &rx51_madc_data, - .usb = &rx51_usb_data, .power = &rx51_t2scripts_data, .codec = &rx51_codec_data, @@ -919,7 +887,6 @@ static struct twl4030_platform_data rx51_twldata __initdata = { .vpll1 = &rx51_vpll1, .vpll2 = &rx51_vpll2, .vsim = &rx51_vsim, - .vdac = &rx51_vdac, .vintana1 = &rx51_vintana1, .vintana2 = &rx51_vintana2, .vintdig = &rx51_vintdig, @@ -984,6 +951,13 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; + omap3_pmic_get_config(&rx51_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, + TWL_COMMON_REGULATOR_VDAC); + + rx51_twldata.vdac->constraints.apply_uV = true; + rx51_twldata.vdac->constraints.name = "VDAC"; + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8495f82fcba..13a64423366 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -226,41 +226,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply zoom_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_consumer_supply zoom_vdda_dac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -static struct regulator_init_data zoom_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), - .consumer_supplies = zoom_vpll2_supplies, -}; - -static struct regulator_init_data zoom_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vdda_dac_supply), - .consumer_supplies = zoom_vdda_dac_supply, -}; - static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -285,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute) gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); } -static int zoom_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data zoom_bci_data = { - .battery_tmp_tbl = zoom_batt_table, - .tblsize = ARRAY_SIZE(zoom_batt_table), -}; - -static struct twl4030_usb_data zoom_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data zoom_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, @@ -312,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, }; -static struct twl4030_madc_platform_data zoom_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data zoom_audio_data; - -static struct twl4030_codec_data zoom_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom_audio_data, -}; - static struct twl4030_platform_data zoom_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &zoom_bci_data, - .madc = &zoom_madc_data, - .usb = &zoom_usb_data, .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, - .codec = &zoom_codec_data, .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - .vpll2 = &zoom_vpll2, - .vdac = &zoom_vdac, }; static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&zoom_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + if (machine_is_omap_zoom2()) { - zoom_audio_data.ramp_delay_value = 3; /* 161 ms */ - zoom_audio_data.hs_extmute = 1; - zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; + struct twl4030_codec_audio_data *audio_data; + audio_data = zoom_twldata.codec->audio; + + audio_data->ramp_delay_value = 3; /* 161 ms */ + audio_data->hs_extmute = 1; + audio_data->set_hs_extmute = zoom2_set_hs_extmute; } omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 0043fa8e370..bcb0c581716 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -20,36 +20,15 @@ * */ -#include <linux/i2c.h> -#include <linux/i2c/twl.h> - #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <plat/i2c.h> #include <plat/mcspi.h> #include <plat/nand.h> #include "common-board-devices.h" -static struct i2c_board_info __initdata pmic_i2c_board_info = { - .addr = 0x48, - .flags = I2C_CLIENT_WAKE, -}; - -void __init omap_pmic_init(int bus, u32 clkrate, - const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data) -{ - strncpy(pmic_i2c_board_info.type, pmic_type, - sizeof(pmic_i2c_board_info.type)); - pmic_i2c_board_info.irq = pmic_irq; - pmic_i2c_board_info.platform_data = pmic_data; - - omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); -} - #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) static struct omap2_mcspi_device_config ads7846_mcspi_config = { diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 679719051df..a0b4a42836a 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,33 +1,11 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#include "twl-common.h" + #define NAND_BLOCK_SIZE SZ_128K -struct twl4030_platform_data; struct mtd_partition; - -void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data); - -static inline void omap2_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); -} - -static inline void omap3_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); -} - -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} - struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c new file mode 100644 index 00000000000..3aaa46f6cd1 --- /dev/null +++ b/arch/arm/mach-omap2/twl-common.c @@ -0,0 +1,304 @@ +/* + * twl-common.c + * + * Copyright (C) 2011 Texas Instruments, Inc.. + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> +#include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <plat/i2c.h> +#include <plat/usb.h> + +#include "twl-common.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + +static struct twl4030_usb_data omap3_usb_pdata = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3_batt_table[] = { +/* 0 C */ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data omap3_bci_pdata = { + .battery_tmp_tbl = omap3_batt_table, + .tblsize = ARRAY_SIZE(omap3_batt_table), +}; + +static struct twl4030_madc_platform_data omap3_madc_pdata = { + .irq_line = 1, +}; + +static struct twl4030_codec_audio_data omap3_audio; + +static struct twl4030_codec_data omap3_codec_pdata = { + .audio_mclk = 26000000, + .audio = &omap3_audio, +}; + +static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; + +static struct regulator_init_data omap3_vdac_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies), + .consumer_supplies = omap3_vdda_dac_supplies, +}; + +static struct regulator_consumer_supply omap3_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + +static struct regulator_init_data omap3_vpll2_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies), + .consumer_supplies = omap3_vpll2_supplies, +}; + +static struct regulator_init_data omap4_vdac_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vaux2_idata = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vaux3_idata = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_consumer_supply omap4_vmmc_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; + +/* VMMC1 for MMC1 card */ +static struct regulator_init_data omap4_vmmc_idata = { + .constraints = { + .min_uV = 1200000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply), + .consumer_supplies = omap4_vmmc_supply, +}; + +static struct regulator_init_data omap4_vpp_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2500000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vana_idata = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vcxio_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vusb_idata = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_clk32kg_idata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL6030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL6030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap4_usb_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap4_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2) + pmic_data->vaux2 = &omap4_vaux2_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3) + pmic_data->vaux3 = &omap4_vaux3_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc) + pmic_data->vmmc = &omap4_vmmc_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp) + pmic_data->vpp = &omap4_vpp_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana) + pmic_data->vana = &omap4_vana_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio) + pmic_data->vcxio = &omap4_vcxio_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb) + pmic_data->vusb = &omap4_vusb_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && + !pmic_data->clk32kg) + pmic_data->clk32kg = &omap4_clk32kg_idata; +} + +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->codec) + pmic_data->codec = &omap3_codec_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h new file mode 100644 index 00000000000..5e83a5bd37f --- /dev/null +++ b/arch/arm/mach-omap2/twl-common.h @@ -0,0 +1,59 @@ +#ifndef __OMAP_PMIC_COMMON__ +#define __OMAP_PMIC_COMMON__ + +#define TWL_COMMON_PDATA_USB (1 << 0) +#define TWL_COMMON_PDATA_BCI (1 << 1) +#define TWL_COMMON_PDATA_MADC (1 << 2) +#define TWL_COMMON_PDATA_AUDIO (1 << 3) + +/* Common LDO regulators for TWL4030/TWL6030 */ +#define TWL_COMMON_REGULATOR_VDAC (1 << 0) +#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1) +#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2) +#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3) + +/* TWL6030 LDO regulators */ +#define TWL_COMMON_REGULATOR_VMMC (1 << 4) +#define TWL_COMMON_REGULATOR_VPP (1 << 5) +#define TWL_COMMON_REGULATOR_VUSIM (1 << 6) +#define TWL_COMMON_REGULATOR_VANA (1 << 7) +#define TWL_COMMON_REGULATOR_VCXIO (1 << 8) +#define TWL_COMMON_REGULATOR_VUSB (1 << 9) +#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) + +/* TWL4030 LDO regulators */ +#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) +#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5) + + +struct twl4030_platform_data; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + +void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags); + +void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags); + +#endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 6c535083240..9882c657b2d 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -33,7 +33,7 @@ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ static struct platform_device omap_mcbsp##port_nr = { \ .name = "omap-mcbsp-dai", \ - .id = OMAP_MCBSP##port_nr, \ + .id = port_nr - 1, \ } #define MCBSP_CONFIG_TYPE2 0x2 @@ -332,14 +332,6 @@ struct omap_mcbsp_reg_cfg { }; typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, - OMAP_MCBSP4, - OMAP_MCBSP5 -} omap_mcbsp_id; - -typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, OMAP_MCBSP_WORD_16, @@ -385,8 +377,6 @@ struct omap_mcbsp { void __iomem *io_base; u8 id; u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; int rx_irq; int tx_irq; diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 455eadcd820..3c1fbdc9246 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -869,9 +869,6 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) if (cpu_is_omap34xx()) omap_st_start(mcbsp); - mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; - mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - /* Only enable SRG, if McBSP is master */ w = MCBSP_READ_CACHE(mcbsp, PCR0); if (w & (FSXM | FSRM | CLKXM | CLKRM)) |