diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/powerpc/Kconfig | 19 | ||||
| -rw-r--r-- | arch/powerpc/Makefile | 9 | ||||
| -rw-r--r-- | arch/powerpc/boot/Makefile | 126 | ||||
| -rw-r--r-- | arch/powerpc/boot/cuboot-mpc7448hpc2.c (renamed from arch/powerpc/boot/cuboot-hpc2.c) | 0 | ||||
| -rwxr-xr-x | arch/powerpc/boot/wrapper | 23 |
5 files changed, 103 insertions, 74 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1348bbc9251..d21495f3572 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -438,25 +438,6 @@ config WANT_DEVICE_TREE bool default n -config DEVICE_TREE - string "Static device tree source file" - depends on WANT_DEVICE_TREE - help - This specifies the device tree source (.dts) file to be - compiled and included when building the bootwrapper. If a - relative filename is given, then it will be relative to - arch/powerpc/boot/dts. If you are not using the bootwrapper, - or do not need to build a dts into the bootwrapper, this - field is ignored. - - For example, this is required when building a cuImage target - for an older U-Boot, which cannot pass a device tree itself. - Such a kernel will not work with a newer U-Boot that tries to - pass a device tree (unless you tell it not to). If your U-Boot - does not mention a device tree in "help bootm", then use the - cuImage target and specify a device tree here. Otherwise, use - the uImage target and leave this field blank. - endmenu config ISA_DMA_API diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index f70df9b64f8..6845482f009 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -151,14 +151,11 @@ core-$(CONFIG_XMON) += arch/powerpc/xmon/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ # Default to zImage, override when needed -defaultimage-y := zImage -defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage -KBUILD_IMAGE := $(defaultimage-y) -all: $(KBUILD_IMAGE) +all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage +BOOT_TARGETS = zImage zImage.initrd uImage treeImage.% cuImage.% PHONY += $(BOOT_TARGETS) @@ -180,7 +177,7 @@ define archhelp endef install: vdso_install - $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install + $(Q)$(MAKE) $(build)=$(boot) install vdso_install: ifeq ($(CONFIG_PPC64),y) diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 122a2707899..49797a45416 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -60,8 +60,9 @@ src-wlib := string.S crt0.S stdio.c main.c \ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ - cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ - fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ + cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c \ + cuboot-bamboo.c cuboot-mpc7448hpc2.c cuboot-taishan.c \ + fixed-head.S ep88xc.c ep405.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c src-boot := $(src-wlib) $(src-plat) empty.c @@ -123,6 +124,8 @@ targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds +dtstree := $(srctree)/$(src)/dts + wrapper :=$(srctree)/$(src)/wrapper wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \ $(wrapper) FORCE @@ -181,7 +184,7 @@ quiet_cmd_wrap = WRAP $@ image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries -image-$(CONFIG_PPC_PS3) += zImage.ps3 +image-$(CONFIG_PPC_PS3) += zImage-dtb.ps3 image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp @@ -191,33 +194,69 @@ image-$(CONFIG_PPC_PRPMC2800) += zImage.prpmc2800 image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage -ifneq ($(CONFIG_DEVICE_TREE),"") -image-$(CONFIG_PPC_8xx) += cuImage.8xx -image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc -image-$(CONFIG_EP405) += zImage.ep405 -image-$(CONFIG_8260) += cuImage.pq2 -image-$(CONFIG_EP8248E) += zImage.ep8248e -image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx -image-$(CONFIG_STORCENTER) += cuImage.824x -image-$(CONFIG_PPC_83xx) += cuImage.83xx -image-$(CONFIG_PPC_85xx) += cuImage.85xx -ifeq ($(CONFIG_CPM2),y) -image-$(CONFIG_PPC_85xx) += cuImage.85xx-cpm2 -endif -image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 +# +# Targets which embed a device tree blob +# +# Theses are default targets to build images which embed device tree blobs. +# They are only required on boards which do not have FDT support in firmware. +# Boards with newish u-boot firmare can use the uImage target above +# + +# Board ports in arch/powerpc/platform/40x/Kconfig +image-$(CONFIG_EP405) += zImage-dtb.ep405 +image-$(CONFIG_WALNUT) += treeImage.walnut + +# Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo image-$(CONFIG_SEQUOIA) += cuImage.sequoia image-$(CONFIG_RAINIER) += cuImage.rainier -image-$(CONFIG_WALNUT) += treeImage.walnut image-$(CONFIG_TAISHAN) += cuImage.taishan image-$(CONFIG_KATMAI) += cuImage.katmai image-$(CONFIG_WARP) += cuImage.warp -endif -ifneq ($(CONFIG_REDBOOT),"") -image-$(CONFIG_PPC_8xx) += zImage.redboot-8xx -endif +# Board ports in arch/powerpc/platform/8xx/Kconfig +image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_PPC_EP88XC) += zImage-dtb.ep88xc +image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ + zImage-dtb.adder875-redboot + +# Board ports in arch/powerpc/platform/52xx/Kconfig +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b + +# Board ports in arch/powerpc/platform/82xx/Kconfig +image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads +image-$(CONFIG_PQ2FADS) += cuImage.pq2fads +image-$(CONFIG_EP8248E) += zImage-dtb.ep8248e + +# Board ports in arch/powerpc/platform/83xx/Kconfig +image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds +image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb +image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ + cuImage.mpc8349emitxgp +image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds +image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds + +# Board ports in arch/powerpc/platform/85xx/Kconfig +image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads +image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads +image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ + cuImage.mpc8548cds \ + cuImage.mpc8555cds +image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds +image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ + cuImage.mpc8572ds +image-$(CONFIG_TQM8540) += cuImage.tqm8540 +image-$(CONFIG_TQM8541) += cuImage.tqm8541 +image-$(CONFIG_TQM8555) += cuImage.tqm8555 +image-$(CONFIG_TQM8560) += cuImage.tqm8560 +image-$(CONFIG_SBC8548) += cuImage.tqm8548 +image-$(CONFIG_SBC8560) += cuImage.tqm8560 + +# Board ports in arch/powerpc/platform/embedded6xx/Kconfig +image-$(CONFIG_STORCENTER) += cuImage.storcenter +image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. @@ -233,24 +272,20 @@ targets += $(image-y) $(initrd-y) $(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz -# If CONFIG_WANT_DEVICE_TREE is set and CONFIG_DEVICE_TREE isn't an -# empty string, define 'dts' to be path to the dts -# CONFIG_DEVICE_TREE will have "" around it, make sure to strip them -ifeq ($(CONFIG_WANT_DEVICE_TREE),y) -ifneq ($(CONFIG_DEVICE_TREE),"") -dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\ - ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE:"%"=%) -endif -endif - # Don't put the ramdisk on the pattern rule; when its missing make will try # the pattern rule with less dependencies that also matches (even with the # hard dependency listed). -$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) $(dts) - $(call if_changed,wrap,$*,$(dts),,$(obj)/ramdisk.image.gz) +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) -$(obj)/zImage.%: vmlinux $(wrapperbits) $(dts) - $(call if_changed,wrap,$*,$(dts)) +$(obj)/zImage.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*) + +$(obj)/zImage-dtb.initrd.%: vmlinux $(wrapperbits) $(dtstree)/%.dts + $(call if_changed,wrap,$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) + +$(obj)/zImage-dtb.%: vmlinux $(wrapperbits) $(dtstree)/%.dts + $(call if_changed,wrap,$*,$(dtstree)/$*.dts) # This cannot be in the root of $(src) as the zImage rule always adds a $(obj) # prefix @@ -260,24 +295,17 @@ $(obj)/vmlinux.strip: vmlinux $(obj)/zImage.iseries: vmlinux $(STRIP) -s -R .comment $< -o $@ -$(obj)/zImage.ps3: vmlinux $(wrapper) $(wrapperbits) $(srctree)/$(src)/dts/ps3.dts - $(STRIP) -s -R .comment $< -o vmlinux.strip - $(call cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,) - -$(obj)/zImage.initrd.ps3: vmlinux $(wrapper) $(wrapperbits) $(srctree)/$(src)/dts/ps3.dts $(obj)/ramdisk.image.gz - $(call cmd,wrap,ps3,$(srctree)/$(src)/dts/ps3.dts,,$(obj)/ramdisk.image.gz) - $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) -$(obj)/cuImage.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,cuboot-$*,$(dts)) +$(obj)/cuImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,$(dtstree)/$*.dts) -$(obj)/treeImage.initrd.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dts),,$(obj)/ramdisk.image.gz) +$(obj)/treeImage.initrd.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts,,$(obj)/ramdisk.image.gz) -$(obj)/treeImage.%: vmlinux $(dts) $(wrapperbits) - $(call if_changed,wrap,treeboot-$*,$(dts)) +$(obj)/treeImage.%: vmlinux $(dtstree)/%.dts $(wrapperbits) + $(call if_changed,wrap,treeboot-$*,$(dtstree)/$*.dts) # If there isn't a platform selected then just strip the vmlinux. ifeq (,$(image-y)) diff --git a/arch/powerpc/boot/cuboot-hpc2.c b/arch/powerpc/boot/cuboot-mpc7448hpc2.c index 1b8953259d7..1b8953259d7 100644 --- a/arch/powerpc/boot/cuboot-hpc2.c +++ b/arch/powerpc/boot/cuboot-mpc7448hpc2.c diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 763a0c46f44..c3178155311 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -158,6 +158,29 @@ miboot|uboot) cuboot*) binary=y gzip= + case "$platform" in + *-mpc885ads|*-adder875*|*-ep88xc) + platformo=$object/cuboot-8xx.o + ;; + *5200*|*-motionpro) + platformo=$object/cuboot-52xx.o + ;; + *-pq2fads|*-ep8248e|*-mpc8272*|*-storcenter) + platformo=$object/cuboot-pq2.o + ;; + *-mpc824*) + platformo=$object/cuboot-824x.o + ;; + *-mpc83*) + platformo=$object/cuboot-83xx.o + ;; + *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555*) + platformo=$object/cuboot-85xx-cpm2.o + ;; + *-mpc85*) + platformo=$object/cuboot-85xx.o + ;; + esac ;; ps3) platformo="$object/ps3-head.o $object/ps3-hvcall.o $object/ps3.o" |