diff options
Diffstat (limited to 'arch')
27 files changed, 78 insertions, 545 deletions
diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 17a17b49a45..1037bba1832 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -24,6 +24,15 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); +/* + * Find the correct struct clk for the device and connection ID. + * We do slightly fuzzy matching here: + * An entry with a NULL ID is assumed to be a wildcard. + * If an entry has a device ID, it must match + * If an entry has a connection ID, it must match + * Then we take the most specific entry - with the following + * order of precidence: dev+con > dev only > con only. + */ static struct clk *clk_find(const char *dev_id, const char *con_id) { struct clk_lookup *p; @@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) int match, best = 0; list_for_each_entry(p, &clocks, node) { - if ((p->dev_id && !dev_id) || (p->con_id && !con_id)) - continue; match = 0; - if (p->dev_id) - match += 2 * (strcmp(p->dev_id, dev_id) == 0); - if (p->con_id) - match += 1 * (strcmp(p->con_id, con_id) == 0); + if (p->dev_id) { + if (!dev_id || strcmp(p->dev_id, dev_id)) + continue; + match += 2; + } + if (p->con_id) { + if (!con_id || strcmp(p->con_id, con_id)) + continue; + match += 1; + } if (match == 0) continue; diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index fe182a85159..c6fb32c36c5 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -12,6 +12,7 @@ #include <mach/common.h> #include <mach/hardware.h> +#include <mach/irqs.h> #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index b240c5f861d..0d784a79509 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,16 +37,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/gpio-switch.h> #include <mach/mux.h> +#include <mach/dma.h> #include <mach/tc.h> #include <mach/nand.h> #include <mach/irda.h> #include <mach/usb.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), @@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = { .id = -1, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H2 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h2_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, @@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_irda_device, &h2_kp_device, &h2_lcd_device, - &h2_mcbsp1_device, }; static void __init h2_init_smc91x(void) @@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H2_NAND_RB_GPIO_PIN); -} - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 5157eea9be3..bf08b6ad22e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -49,8 +49,6 @@ #include <mach/keypad.h> #include <mach/dma.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #define H3_TS_GPIO 48 @@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H3 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h3_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, - &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -static struct omap_gpio_switch h3_gpio_switches[] __initdata = { - { - .name = "mmc_slot", - .gpio = OMAP_MPUIO(1), - .type = OMAP_GPIO_SWITCH_TYPE_COVER, - .debounce_rising = 100, - .debounce_falling = 0, - .notify = h3_mmc_slot_cover_handler, - .notify_data = NULL, - }, -}; - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index af2fb907008..071cd02a734 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -37,8 +37,6 @@ #include <mach/usb.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #include <mach/mmc.h> static int innovator_keymap[] = { @@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OMAP Innovator AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device innovator_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource innovator_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = { static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, - &innovator_mcbsp1_device, &innovator_kp_device, &innovator1510_lcd_device, &innovator1510_spi_device, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4970c402a59..af51e0b180f 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <mach/keypad.h> #include <mach/common.h> #include <mach/dsp_common.h> -#include <mach/aic23.h> #include <mach/omapfb.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> @@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock); */ static int audio_pwr_state = -1; +static inline void aic23_power_up(void) +{ +} +static inline void aic23_power_down(void) +{ +} + /* * audio_pwr_up / down should be called under audio_pwr_lock */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ff9e67baa5c..1a16ecb2ccc 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -51,8 +51,6 @@ #include <mach/mux.h> #include <mach/tc.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OSK AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device osk5912_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *osk5912_devices[] __initdata = { &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, - &osk5912_mcbsp1_device, }; static struct gpio_led tps_leds[] = { @@ -259,8 +220,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { .platform_data = &tps_board, }, + { + I2C_BOARD_INFO("tlv320aic23", 0x1B), + }, /* TODO when driver support is ready: - * - aic23 audio chip at 0x1a * - optionally on Mistral, ov9640 camera sensor at 0x30 */ }; diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 75e32d35afd..99f2b43f254 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -42,8 +42,6 @@ #include <mach/irda.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static void __init omap_palmte_init_irq(void) { @@ -195,15 +193,6 @@ static struct omap_usb_config palmte_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_mmc_config palmte_mmc_config __initdata = { - .mmc[0] = { - .enabled = 1, - .wp_pin = PALMTE_MMC_WP_GPIO, - .power_pin = PALMTE_MMC_POWER_GPIO, - .switch_pin = PALMTE_MMC_SWITCH_GPIO, - }, -}; - static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -212,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), - .xcr2 = XDATDLY(1) | XFIG, - .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), - .pcr0 = SCLKME | FSXP | CLKXP, -}; - -static struct omap_alsa_codec_config palmte_alsa_config = { - .name = "TSC2102 audio", - .mcbsp_regs_alsa = &palmte_mcbsp1_regs, - .codec_configure_dev = NULL, /* tsc2102_configure, */ - .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ - .codec_clock_on = NULL, /* tsc2102_clock_on, */ - .codec_clock_off = NULL, /* tsc2102_clock_off, */ - .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ -}; - #ifdef CONFIG_APM /* * Values measured in 10 minute intervals averaged over 10 samples. diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 5c001afe806..1cbc1275c95 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -30,7 +30,6 @@ #include <asm/mach/flash.h> #include <mach/led.h> -#include <mach/mcbsp.h> #include <mach/gpio.h> #include <mach/mux.h> #include <mach/usb.h> @@ -40,7 +39,6 @@ #include <mach/irda.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/omap-alsa.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = { .resource = &palmtt_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | - RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | - XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | - FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmTT AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device palmtt_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource palmtt_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = { static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, - &palmtt_mcbsp1_device, &palmtt_kp_device, &palmtt_lcd_device, &palmtt_irda_device, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index cc05257eb1c..baf5efbfe3e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -32,7 +32,6 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/mcbsp.h> #include <mach/gpio.h> #include <mach/mux.h> #include <mach/usb.h> @@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = { .id = -1, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmZ71 AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate */ - .codec_clock_setup = NULL, /* aic23_clock_setup */ - .codec_clock_on = NULL, /* aic23_clock_on */ - .codec_clock_off = NULL, /* aic23_clock_off */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate */ -}; - -static struct platform_device palmz71_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct omap_backlight_config palmz71_backlight_config = { .default_intensity = 0xa0, }; @@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = { static struct platform_device *devices[] __initdata = { &palmz71_rom_device, &palmz71_kp_device, - &palmz71_mcbsp1_device, &palmz71_lcd_device, &palmz71_irda_device, &palmz71_spi_device, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8171fe0ca08..28c76a1e71c 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -34,13 +34,12 @@ #include <mach/gpio.h> #include <mach/mux.h> +#include <mach/dma.h> #include <mach/irda.h> #include <mach/usb.h> #include <mach/tc.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #include <mach/keypad.h> /* Write to I2C device */ @@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = { .resource = sx1_irda_resources, }; -/*----------- McBSP & Sound -------------------------*/ - -/* Playback interface - McBSP1 */ -static struct omap_mcbsp_reg_cfg mcbsp1_regs = { - .spcr2 = XINTM(3), /* SPCR2=30 */ - .spcr1 = RINTM(3), /* SPCR1=30 */ - .rcr2 = 0, /* RCR2 =00 */ - .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */ - .xcr2 = 0, /* XCR2 = 0 */ - .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ - .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ - .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ - .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /* PCR0 =0f0f */ -}; - -static struct omap_alsa_codec_config sx1_alsa_config = { - .name = "SX1 EGold", - .mcbsp_regs_alsa = &mcbsp1_regs, -}; - -static struct platform_device sx1_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &sx1_alsa_config, - }, -}; - /*----------- MTD -------------------------*/ static struct mtd_partition sx1_partitions[] = { @@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, &sx1_lcd_device, - &sx1_mcbsp1_device, &sx1_irda_device, }; /*-----------------------------------------*/ @@ -423,9 +392,9 @@ static void __init omap_sx1_init(void) /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ - omap_request_gpio(1); /* A_IRDA_OFF */ - omap_request_gpio(11); /* A_SWITCH */ - omap_request_gpio(15); /* A_USB_ON */ + gpio_request(1, "A_IRDA_OFF"); + gpio_request(11, "A_SWITCH"); + gpio_request(15, "A_USB_ON"); gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c224f3c6423..a7653542a2b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,7 +22,6 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> -#include <linux/irq.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 4474da7bc88..ca7a0cc1707 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> +#include <mach/irqs.h> #include <mach/dma.h> #include <mach/irqs.h> #include <mach/mux.h> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bf1e5d32c2a..0a7b24ba165 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -22,8 +22,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> -#include <linux/irq.h> -#include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> #include <linux/err.h> @@ -282,65 +280,16 @@ static void __init apollon_led_init(void) { /* LED0 - AA10 */ omap_cfg_reg(AA10_242X_GPIO13); - omap_request_gpio(LED0_GPIO13); - omap_set_gpio_direction(LED0_GPIO13, 0); - omap_set_gpio_dataout(LED0_GPIO13, 0); + gpio_request(LED0_GPIO13, "LED0"); + gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ omap_cfg_reg(AA6_242X_GPIO14); - omap_request_gpio(LED1_GPIO14); - omap_set_gpio_direction(LED1_GPIO14, 0); - omap_set_gpio_dataout(LED1_GPIO14, 0); + gpio_request(LED1_GPIO14, "LED1"); + gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ omap_cfg_reg(AA4_242X_GPIO15); - omap_request_gpio(LED2_GPIO15); - omap_set_gpio_direction(LED2_GPIO15, 0); - omap_set_gpio_dataout(LED2_GPIO15, 0); -} - -static irqreturn_t apollon_sw_interrupt(int irq, void *ignored) -{ - static unsigned int led0, led1, led2; - - if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) - omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) - omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) - omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); - - return IRQ_HANDLED; -} - -static void __init apollon_sw_init(void) -{ - /* Enter SW - Y11 */ - omap_cfg_reg(Y11_242X_GPIO16); - omap_request_gpio(SW_ENTER_GPIO16); - gpio_direction_input(SW_ENTER_GPIO16); - /* Up SW - AA12 */ - omap_cfg_reg(AA12_242X_GPIO17); - omap_request_gpio(SW_UP_GPIO17); - gpio_direction_input(SW_UP_GPIO17); - /* Down SW - AA8 */ - omap_cfg_reg(AA8_242X_GPIO58); - omap_request_gpio(SW_DOWN_GPIO58); - gpio_direction_input(SW_DOWN_GPIO58); - - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, - IRQF_SHARED, "enter sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, - IRQF_SHARED, "up sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, - IRQF_SHARED, "down sw", - &apollon_sw_interrupt)) - return; + gpio_request(LED2_GPIO15, "LED2"); + gpio_direction_output(LED2_GPIO15, 0); } static void __init apollon_usb_init(void) @@ -357,7 +306,6 @@ static void __init omap_apollon_init(void) u32 v; apollon_led_init(); - apollon_sw_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index aa6972781e4..f6a13451d1f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (omap_request_gpio(eth_gpio) < 0) { + if (gpio_request(eth_gpio, "smc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", eth_gpio); return; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e5ada01b5f..38c88fbe658 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/i2c/twl4030.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index acdc709901c..e20023c9d15 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> +#include <mach/irqs.h> #include <mach/dma.h> #include <mach/irqs.h> #include <mach/mux.h> diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index bdb5fd983b1..1601698b980 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -68,7 +68,7 @@ mc_copy_user_page(void *from, void *to) : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); } -void v4_mc_copy_user_highpage(struct page *from, struct page *to, +void v4_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr) { void *kto = kmap_atomic(to, KM_USER1); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 18373f73f2f..9f88dd3be60 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm) */ static void unmap_area_sections(unsigned long virt, unsigned long size) { - unsigned long addr = virt, end = virt + (size & ~SZ_1M); + unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1)); pgd_t *pgd; flush_cache_vunmap(addr, end); @@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr) void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); #ifndef CONFIG_SMP struct vm_struct **p, *tmp; -#endif - unsigned int section_mapping = 0; -#ifndef CONFIG_SMP /* * If this is a section based mapping we need to handle it * specially as the VM subsystem does not know how to handle @@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr) for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) { if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) { if (tmp->flags & VM_ARM_SECTION_MAPPING) { - *p = tmp->next; unmap_area_sections((unsigned long)tmp->addr, tmp->size); - kfree(tmp); - section_mapping = 1; } break; } @@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr) write_unlock(&vmlist_lock); #endif - if (!section_mapping) - vunmap(addr); + vunmap(addr); } EXPORT_SYMBOL(__iounmap); diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 692d2b495af..e77373c39f8 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, u32 val; val = dma_read(CCR(lch)); - val &= ~(3 << 19); - if (dma_trigger > 63) - val |= 1 << 20; - if (dma_trigger > 31) - val |= 1 << 19; - - val &= ~(0x1f); - val |= (dma_trigger & 0x1f); + + /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ + val &= ~((3 << 19) | 0x1f); + val |= (dma_trigger & ~0x1f) << 14; + val |= dma_trigger & 0x1f; if (sync_mode & OMAP_DMA_SYNC_FRAME) val |= 1 << 5; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 07b6968a7d1..f856a90b264 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) /* FIXME for at least omap2, show pullup/pulldown state */ irqstat = irq_desc[irq].status; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; @@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) (bank->suspend_wakeup & mask) ? " wakeup" : ""); } +#endif seq_printf(s, "\n"); } diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h deleted file mode 100644 index 5ccedac7752..00000000000 --- a/arch/arm/plat-omap/include/mach/aic23.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/aic23.h - * - * Hardware definitions for TI TLV320AIC23 audio codec - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_AIC23_H -#define __ASM_ARCH_AIC23_H - -// Codec TLV320AIC23 -#define LEFT_LINE_VOLUME_ADDR 0x00 -#define RIGHT_LINE_VOLUME_ADDR 0x01 -#define LEFT_CHANNEL_VOLUME_ADDR 0x02 -#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 -#define ANALOG_AUDIO_CONTROL_ADDR 0x04 -#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 -#define POWER_DOWN_CONTROL_ADDR 0x06 -#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 -#define SAMPLE_RATE_CONTROL_ADDR 0x08 -#define DIGITAL_INTERFACE_ACT_ADDR 0x09 -#define RESET_CONTROL_ADDR 0x0F - -// Left (right) line input volume control register -#define LRS_ENABLED 0x0100 -#define LIM_MUTED 0x0080 -#define LIV_DEFAULT 0x0017 -#define LIV_MAX 0x001f -#define LIV_MIN 0x0000 - -// Left (right) channel headphone volume control register -#define LZC_ON 0x0080 -#define LHV_DEFAULT 0x0079 -#define LHV_MAX 0x007f -#define LHV_MIN 0x0000 - -// Analog audio path control register -#define STA_REG(x) ((x)<<6) -#define STE_ENABLED 0x0020 -#define DAC_SELECTED 0x0010 -#define BYPASS_ON 0x0008 -#define INSEL_MIC 0x0004 -#define MICM_MUTED 0x0002 -#define MICB_20DB 0x0001 - -// Digital audio path control register -#define DACM_MUTE 0x0008 -#define DEEMP_32K 0x0002 -#define DEEMP_44K 0x0004 -#define DEEMP_48K 0x0006 -#define ADCHP_ON 0x0001 - -// Power control down register -#define DEVICE_POWER_OFF 0x0080 -#define CLK_OFF 0x0040 -#define OSC_OFF 0x0020 -#define OUT_OFF 0x0010 -#define DAC_OFF 0x0008 -#define ADC_OFF 0x0004 -#define MIC_OFF 0x0002 -#define LINE_OFF 0x0001 - -// Digital audio interface register -#define MS_MASTER 0x0040 -#define LRSWAP_ON 0x0020 -#define LRP_ON 0x0010 -#define IWL_16 0x0000 -#define IWL_20 0x0004 -#define IWL_24 0x0008 -#define IWL_32 0x000C -#define FOR_I2S 0x0002 -#define FOR_DSP 0x0003 - -// Sample rate control register -#define CLKOUT_HALF 0x0080 -#define CLKIN_HALF 0x0040 -#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode -#define USB_CLK_ON 0x0001 -#define SR_MASK 0xf -#define CLKOUT_SHIFT 7 -#define CLKIN_SHIFT 6 -#define SR_SHIFT 2 -#define BOSR_SHIFT 1 - -// Digital interface register -#define ACT_ON 0x0001 - -#define TLV320AIC23ID1 (0x1a) // cs low -#define TLV320AIC23ID2 (0x1b) // cs high - -void aic23_power_up(void); -void aic23_power_down(void); - -#endif /* __ASM_ARCH_AIC23_H */ diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h index 14909dc7858..1888326da7e 100644 --- a/arch/arm/plat-omap/include/mach/board-h3.h +++ b/arch/arm/plat-omap/include/mach/board-h3.h @@ -30,7 +30,9 @@ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ #define OMAP1710_ETHR_START 0x04000300 +#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) + extern void h3_mmc_init(void); -extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 04e68e88f13..8d9dfe31438 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int omap_request_gpio(int gpio) -{ - return gpio_request(gpio, "FIXME"); -} - -static inline void omap_free_gpio(int gpio) -{ - gpio_free(gpio); -} - static inline int gpio_get_value(unsigned gpio) { return __gpio_get_value(gpio); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 6a0d1a0a24a..eef873db3d4 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -87,6 +87,10 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C +/* Dummy defines, these are not available on omap1 */ +#define OMAP_MCBSP_REG_XCCR 0x00 +#define OMAP_MCBSP_REG_RCCR 0x00 + #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -231,11 +235,16 @@ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ /*********************** McBSP XCCR bit definitions *************************/ +#define EXTCLKGATE 0x8000 +#define PPCONNECT 0x4000 +#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ +#define XFULL_CYCLE 0x0800 #define DILB 0x0020 #define XDMAEN 0x0008 #define XDISABLE 0x0001 /********************** McBSP RCCR bit definitions *************************/ +#define RFULL_CYCLE 0x0800 #define RDMAEN 0x0008 #define RDISABLE 0x0001 @@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg { u16 rcerh; u16 xcerg; u16 xcerh; + u16 xccr; + u16 rccr; }; typedef enum { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index af33fc713e1..f2401a831f9 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr); + OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr); + } } EXPORT_SYMBOL(omap_mcbsp_config); diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index add0485703b..e278de6862a 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -431,15 +431,6 @@ bad: /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_GADGET_OMAP) || \ - defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \ - (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)) -static void usb_release(struct device *dev) -{ - /* normally not freed */ -} -#endif - #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { @@ -466,7 +457,6 @@ static struct platform_device udc_device = { .name = "omap_udc", .id = -1, .dev = { - .release = usb_release, .dma_mask = &udc_dmamask, .coherent_dma_mask = 0xffffffff, }, @@ -497,7 +487,6 @@ static struct platform_device ohci_device = { .name = "ohci", .id = -1, .dev = { - .release = usb_release, .dma_mask = &ohci_dmamask, .coherent_dma_mask = 0xffffffff, }, @@ -524,9 +513,6 @@ static struct resource otg_resources[] = { static struct platform_device otg_device = { .name = "omap_otg", .id = -1, - .dev = { - .release = usb_release, - }, .num_resources = ARRAY_SIZE(otg_resources), .resource = otg_resources, }; |