diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-s3c2440/mach-mini2440.c | 18 |
1 files changed, 9 insertions, 9 deletions
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index 362a2f97f74..a76bcda210a 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -103,10 +103,10 @@ static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) switch (cmd) { case S3C2410_UDC_P_ENABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 1); + gpio_set_value(S3C2410_GPC(5), 1); break; case S3C2410_UDC_P_DISABLE : - s3c2410_gpio_setpin(S3C2410_GPC(5), 0); + gpio_set_value(S3C2410_GPC(5), 0); break; case S3C2410_UDC_P_RESET : break; @@ -636,22 +636,22 @@ static void __init mini2440_init(void) s3c_gpio_cfgpin(S3C2410_GPC(0), S3C2410_GPC0_LEND); /* Turn the backlight early on */ - s3c2410_gpio_setpin(S3C2410_GPG(4), 1); - s3c_gpio_cfgpin(S3C2410_GPG(4), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPG(4), "backlight")); + gpio_direction_output(S3C2410_GPG(4), 1); /* remove pullup on optional PWM backlight -- unused on 3.5 and 7"s */ - s3c2410_gpio_pullup(S3C2410_GPB(1), 0); + s3c_gpio_setpull(S3C2410_GPB(1), S3C_GPIO_PULL_UP); s3c2410_gpio_setpin(S3C2410_GPB(1), 0); s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); /* Make sure the D+ pullup pin is output */ - s3c_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT); + WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); + gpio_direction_output(S3C2410_GPC(5), 0); /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { - s3c2410_gpio_pullup(mini2440_buttons[i].gpio, 0); - s3c_gpio_cfgpin(mini2440_buttons[i].gpio, - S3C2410_GPIO_INPUT); + s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(mini2440_buttons[i].gpio, S3C2410_GPIO_INPUT); } if (features.lcd_index != -1) { int li; |