summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe.c36
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_ic.c2
-rw-r--r--arch/powerpc/sysdev/qe_lib/qe_io.c35
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc.c270
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_fast.c127
-rw-r--r--arch/powerpc/sysdev/qe_lib/ucc_slow.c48
6 files changed, 236 insertions, 282 deletions
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 90f87408b5d..3d57d3835b0 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -141,7 +141,7 @@ EXPORT_SYMBOL(qe_issue_cmd);
* 16 BRGs, which can be connected to the QE channels or output
* as clocks. The BRGs are in two different block of internal
* memory mapped space.
- * The baud rate clock is the system clock divided by something.
+ * The BRG clock is the QE clock divided by 2.
* It was set up long ago during the initial boot phase and is
* is given to us.
* Baud rate clocks are zero-based in the driver code (as that maps
@@ -165,28 +165,38 @@ unsigned int get_brg_clk(void)
return brg_clk;
}
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
+/* Program the BRG to the given sampling rate and multiplier
+ *
+ * @brg: the BRG, 1-16
+ * @rate: the desired sampling rate
+ * @multiplier: corresponds to the value programmed in GUMR_L[RDCR] or
+ * GUMR_L[TDCR]. E.g., if this BRG is the RX clock, and GUMR_L[RDCR]=01,
+ * then 'multiplier' should be 8.
+ *
+ * Also note that the value programmed into the BRGC register must be even.
*/
-void qe_setbrg(u32 brg, u32 rate)
+void qe_setbrg(unsigned int brg, unsigned int rate, unsigned int multiplier)
{
- volatile u32 *bp;
u32 divisor, tempval;
- int div16 = 0;
+ u32 div16 = 0;
- bp = &qe_immr->brg.brgc[brg];
+ divisor = get_brg_clk() / (rate * multiplier);
- divisor = (get_brg_clk() / rate);
if (divisor > QE_BRGC_DIVISOR_MAX + 1) {
- div16 = 1;
+ div16 = QE_BRGC_DIV16;
divisor /= 16;
}
- tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) | QE_BRGC_ENABLE;
- if (div16)
- tempval |= QE_BRGC_DIV16;
+ /* Errata QE_General4, which affects some MPC832x and MPC836x SOCs, says
+ that the BRG divisor must be even if you're not using divide-by-16
+ mode. */
+ if (!div16 && (divisor & 1))
+ divisor++;
+
+ tempval = ((divisor - 1) << QE_BRGC_DIVISOR_SHIFT) |
+ QE_BRGC_ENABLE | div16;
- out_be32(bp, tempval);
+ out_be32(&qe_immr->brg.brgc[brg - 1], tempval);
}
/* Initialize SNUMs (thread serial numbers) according to
diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c
index 55e6f394af8..9a2d1edd050 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_ic.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c
@@ -405,8 +405,6 @@ void __init qe_ic_init(struct device_node *node, unsigned int flags)
set_irq_data(qe_ic->virq_high, qe_ic);
set_irq_chained_handler(qe_ic->virq_high, qe_ic_cascade_high);
}
-
- printk("QEIC (%d IRQ sources) at %p\n", NR_QE_IC_INTS, qe_ic->regs);
}
void qe_ic_set_highest_priority(unsigned int virq, int high)
diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c
index e32b45bf9ff..a114cb0c572 100644
--- a/arch/powerpc/sysdev/qe_lib/qe_io.c
+++ b/arch/powerpc/sysdev/qe_lib/qe_io.c
@@ -195,29 +195,22 @@ EXPORT_SYMBOL(par_io_of_config);
#ifdef DEBUG
static void dump_par_io(void)
{
- int i;
+ unsigned int i;
- printk(KERN_INFO "PAR IO registars:\n");
- printk(KERN_INFO "Base address: 0x%08x\n", (u32) par_io);
+ printk(KERN_INFO "%s: par_io=%p\n", __FUNCTION__, par_io);
for (i = 0; i < num_par_io_ports; i++) {
- printk(KERN_INFO "cpodr[%d] : addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpodr,
- in_be32(&par_io[i].cpodr));
- printk(KERN_INFO "cpdata[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdata,
- in_be32(&par_io[i].cpdata));
- printk(KERN_INFO "cpdir1[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdir1,
- in_be32(&par_io[i].cpdir1));
- printk(KERN_INFO "cpdir2[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cpdir2,
- in_be32(&par_io[i].cpdir2));
- printk(KERN_INFO "cppar1[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cppar1,
- in_be32(&par_io[i].cppar1));
- printk(KERN_INFO "cppar2[%d]: addr - 0x%08x, val - 0x%08x\n",
- i, (u32) & par_io[i].cppar2,
- in_be32(&par_io[i].cppar2));
+ printk(KERN_INFO " cpodr[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpodr));
+ printk(KERN_INFO " cpdata[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdata));
+ printk(KERN_INFO " cpdir1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir1));
+ printk(KERN_INFO " cpdir2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cpdir2));
+ printk(KERN_INFO " cppar1[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar1));
+ printk(KERN_INFO " cppar2[%u]=%08x\n", i,
+ in_be32(&par_io[i].cppar2));
}
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c
index f970e5415ac..0e348d9af8a 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc.c
@@ -28,228 +28,188 @@
static DEFINE_SPINLOCK(ucc_lock);
-int ucc_set_qe_mux_mii_mng(int ucc_num)
+int ucc_set_qe_mux_mii_mng(unsigned int ucc_num)
{
unsigned long flags;
+ if (ucc_num > UCC_MAX_NUM - 1)
+ return -EINVAL;
+
spin_lock_irqsave(&ucc_lock, flags);
- out_be32(&qe_immr->qmx.cmxgcr,
- ((in_be32(&qe_immr->qmx.cmxgcr) &
- ~QE_CMXGCR_MII_ENET_MNG) |
- (ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT)));
+ clrsetbits_be32(&qe_immr->qmx.cmxgcr, QE_CMXGCR_MII_ENET_MNG,
+ ucc_num << QE_CMXGCR_MII_ENET_MNG_SHIFT);
spin_unlock_irqrestore(&ucc_lock, flags);
return 0;
}
EXPORT_SYMBOL(ucc_set_qe_mux_mii_mng);
-int ucc_set_type(int ucc_num, struct ucc_common *regs,
- enum ucc_speed_type speed)
-{
- u8 guemr = 0;
-
- /* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
- return -EINVAL;
-
- guemr = regs->guemr;
- guemr &= ~(UCC_GUEMR_MODE_MASK_RX | UCC_GUEMR_MODE_MASK_TX);
- switch (speed) {
- case UCC_SPEED_TYPE_SLOW:
- guemr |= (UCC_GUEMR_MODE_SLOW_RX | UCC_GUEMR_MODE_SLOW_TX);
- break;
- case UCC_SPEED_TYPE_FAST:
- guemr |= (UCC_GUEMR_MODE_FAST_RX | UCC_GUEMR_MODE_FAST_TX);
- break;
- default:
- return -EINVAL;
- }
- regs->guemr = guemr;
-
- return 0;
-}
-
-int ucc_init_guemr(struct ucc_common *regs)
+/* Configure the UCC to either Slow or Fast.
+ *
+ * A given UCC can be figured to support either "slow" devices (e.g. UART)
+ * or "fast" devices (e.g. Ethernet).
+ *
+ * 'ucc_num' is the UCC number, from 0 - 7.
+ *
+ * This function also sets the UCC_GUEMR_SET_RESERVED3 bit because that bit
+ * must always be set to 1.
+ */
+int ucc_set_type(unsigned int ucc_num, enum ucc_speed_type speed)
{
- u8 guemr = 0;
-
- if (!regs)
- return -EINVAL;
-
- /* Set bit 3 (which is reserved in the GUEMR register) to 1 */
- guemr = UCC_GUEMR_SET_RESERVED3;
-
- regs->guemr = guemr;
-
- return 0;
-}
+ u8 __iomem *guemr;
-static void get_cmxucr_reg(int ucc_num, volatile u32 ** p_cmxucr, u8 * reg_num,
- u8 * shift)
-{
+ /* The GUEMR register is at the same location for both slow and fast
+ devices, so we just use uccX.slow.guemr. */
switch (ucc_num) {
- case 0: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
- *reg_num = 1;
- *shift = 16;
+ case 0: guemr = &qe_immr->ucc1.slow.guemr;
break;
- case 2: *p_cmxucr = &(qe_immr->qmx.cmxucr1);
- *reg_num = 1;
- *shift = 0;
+ case 1: guemr = &qe_immr->ucc2.slow.guemr;
break;
- case 4: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
- *reg_num = 2;
- *shift = 16;
+ case 2: guemr = &qe_immr->ucc3.slow.guemr;
break;
- case 6: *p_cmxucr = &(qe_immr->qmx.cmxucr2);
- *reg_num = 2;
- *shift = 0;
+ case 3: guemr = &qe_immr->ucc4.slow.guemr;
break;
- case 1: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
- *reg_num = 3;
- *shift = 16;
+ case 4: guemr = &qe_immr->ucc5.slow.guemr;
break;
- case 3: *p_cmxucr = &(qe_immr->qmx.cmxucr3);
- *reg_num = 3;
- *shift = 0;
+ case 5: guemr = &qe_immr->ucc6.slow.guemr;
break;
- case 5: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
- *reg_num = 4;
- *shift = 16;
+ case 6: guemr = &qe_immr->ucc7.slow.guemr;
break;
- case 7: *p_cmxucr = &(qe_immr->qmx.cmxucr4);
- *reg_num = 4;
- *shift = 0;
+ case 7: guemr = &qe_immr->ucc8.slow.guemr;
break;
default:
- break;
+ return -EINVAL;
}
+
+ clrsetbits_8(guemr, UCC_GUEMR_MODE_MASK,
+ UCC_GUEMR_SET_RESERVED3 | speed);
+
+ return 0;
+}
+
+static void get_cmxucr_reg(unsigned int ucc_num, __be32 **cmxucr,
+ unsigned int *reg_num, unsigned int *shift)
+{
+ unsigned int cmx = ((ucc_num & 1) << 1) + (ucc_num > 3);
+
+ *reg_num = cmx + 1;
+ *cmxucr = &qe_immr->qmx.cmxucr[cmx];
+ *shift = 16 - 8 * (ucc_num & 2);
}
-int ucc_mux_set_grant_tsa_bkpt(int ucc_num, int set, u32 mask)
+int ucc_mux_set_grant_tsa_bkpt(unsigned int ucc_num, int set, u32 mask)
{
- volatile u32 *p_cmxucr;
- u8 reg_num;
- u8 shift;
+ __be32 *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
/* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
- get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
if (set)
- out_be32(p_cmxucr, in_be32(p_cmxucr) | (mask << shift));
+ setbits32(cmxucr, mask << shift);
else
- out_be32(p_cmxucr, in_be32(p_cmxucr) & ~(mask << shift));
+ clrbits32(cmxucr, mask << shift);
return 0;
}
-int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode)
+int ucc_set_qe_mux_rxtx(unsigned int ucc_num, enum qe_clock clock,
+ enum comm_dir mode)
{
- volatile u32 *p_cmxucr;
- u8 reg_num;
- u8 shift;
- u32 clock_bits;
- u32 clock_mask;
- int source = -1;
+ __be32 *cmxucr;
+ unsigned int reg_num;
+ unsigned int shift;
+ u32 clock_bits = 0;
/* check if the UCC number is in range. */
- if ((ucc_num > UCC_MAX_NUM - 1) || (ucc_num < 0))
+ if (ucc_num > UCC_MAX_NUM - 1)
return -EINVAL;
- if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX))) {
- printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: bad comm mode type passed.");
+ /* The communications direction must be RX or TX */
+ if (!((mode == COMM_DIR_RX) || (mode == COMM_DIR_TX)))
return -EINVAL;
- }
- get_cmxucr_reg(ucc_num, &p_cmxucr, &reg_num, &shift);
+ get_cmxucr_reg(ucc_num, &cmxucr, &reg_num, &shift);
switch (reg_num) {
case 1:
switch (clock) {
- case QE_BRG1: source = 1; break;
- case QE_BRG2: source = 2; break;
- case QE_BRG7: source = 3; break;
- case QE_BRG8: source = 4; break;
- case QE_CLK9: source = 5; break;
- case QE_CLK10: source = 6; break;
- case QE_CLK11: source = 7; break;
- case QE_CLK12: source = 8; break;
- case QE_CLK15: source = 9; break;
- case QE_CLK16: source = 10; break;
- default: source = -1; break;
+ case QE_BRG1: clock_bits = 1; break;
+ case QE_BRG2: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK9: clock_bits = 5; break;
+ case QE_CLK10: clock_bits = 6; break;
+ case QE_CLK11: clock_bits = 7; break;
+ case QE_CLK12: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
}
break;
case 2:
switch (clock) {
- case QE_BRG5: source = 1; break;
- case QE_BRG6: source = 2; break;
- case QE_BRG7: source = 3; break;
- case QE_BRG8: source = 4; break;
- case QE_CLK13: source = 5; break;
- case QE_CLK14: source = 6; break;
- case QE_CLK19: source = 7; break;
- case QE_CLK20: source = 8; break;
- case QE_CLK15: source = 9; break;
- case QE_CLK16: source = 10; break;
- default: source = -1; break;
+ case QE_BRG5: clock_bits = 1; break;
+ case QE_BRG6: clock_bits = 2; break;
+ case QE_BRG7: clock_bits = 3; break;
+ case QE_BRG8: clock_bits = 4; break;
+ case QE_CLK13: clock_bits = 5; break;
+ case QE_CLK14: clock_bits = 6; break;
+ case QE_CLK19: clock_bits = 7; break;
+ case QE_CLK20: clock_bits = 8; break;
+ case QE_CLK15: clock_bits = 9; break;
+ case QE_CLK16: clock_bits = 10; break;
+ default: break;
}
break;
case 3:
switch (clock) {
- case QE_BRG9: source = 1; break;
- case QE_BRG10: source = 2; break;
- case QE_BRG15: source = 3; break;
- case QE_BRG16: source = 4; break;
- case QE_CLK3: source = 5; break;
- case QE_CLK4: source = 6; break;
- case QE_CLK17: source = 7; break;
- case QE_CLK18: source = 8; break;
- case QE_CLK7: source = 9; break;
- case QE_CLK8: source = 10; break;
- case QE_CLK16: source = 11; break;
- default: source = -1; break;
+ case QE_BRG9: clock_bits = 1; break;
+ case QE_BRG10: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK3: clock_bits = 5; break;
+ case QE_CLK4: clock_bits = 6; break;
+ case QE_CLK17: clock_bits = 7; break;
+ case QE_CLK18: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
}
break;
case 4:
switch (clock) {
- case QE_BRG13: source = 1; break;
- case QE_BRG14: source = 2; break;
- case QE_BRG15: source = 3; break;
- case QE_BRG16: source = 4; break;
- case QE_CLK5: source = 5; break;
- case QE_CLK6: source = 6; break;
- case QE_CLK21: source = 7; break;
- case QE_CLK22: source = 8; break;
- case QE_CLK7: source = 9; break;
- case QE_CLK8: source = 10; break;
- case QE_CLK16: source = 11; break;
- default: source = -1; break;
+ case QE_BRG13: clock_bits = 1; break;
+ case QE_BRG14: clock_bits = 2; break;
+ case QE_BRG15: clock_bits = 3; break;
+ case QE_BRG16: clock_bits = 4; break;
+ case QE_CLK5: clock_bits = 5; break;
+ case QE_CLK6: clock_bits = 6; break;
+ case QE_CLK21: clock_bits = 7; break;
+ case QE_CLK22: clock_bits = 8; break;
+ case QE_CLK7: clock_bits = 9; break;
+ case QE_CLK8: clock_bits = 10; break;
+ case QE_CLK16: clock_bits = 11; break;
+ default: break;
}
break;
- default:
- source = -1;
- break;
+ default: break;
}
- if (source == -1) {
- printk(KERN_ERR
- "ucc_set_qe_mux_rxtx: Bad combination of clock and UCC.");
+ /* Check for invalid combination of clock and UCC number */
+ if (!clock_bits)
return -ENOENT;
- }
- clock_bits = (u32) source;
- clock_mask = QE_CMXUCR_TX_CLK_SRC_MASK;
- if (mode == COMM_DIR_RX) {
- clock_bits <<= 4; /* Rx field is 4 bits to left of Tx field */
- clock_mask <<= 4; /* Rx field is 4 bits to left of Tx field */
- }
- clock_bits <<= shift;
- clock_mask <<= shift;
+ if (mode == COMM_DIR_RX)
+ shift += 4;
- out_be32(p_cmxucr, (in_be32(p_cmxucr) & ~clock_mask) | clock_bits);
+ clrsetbits_be32(cmxucr, QE_CMXUCR_TX_CLK_SRC_MASK << shift,
+ clock_bits << shift);
return 0;
}
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
index 3df202e8d33..3223acbc39e 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c
@@ -30,46 +30,45 @@
void ucc_fast_dump_regs(struct ucc_fast_private * uccf)
{
- printk(KERN_INFO "UCC%d Fast registers:", uccf->uf_info->ucc_num);
- printk(KERN_INFO "Base address: 0x%08x", (u32) uccf->uf_regs);
-
- printk(KERN_INFO "gumr : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
- printk(KERN_INFO "upsmr : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
- printk(KERN_INFO "utodr : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
- printk(KERN_INFO "udsr : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
- printk(KERN_INFO "ucce : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
- printk(KERN_INFO "uccm : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
- printk(KERN_INFO "uccs : addr - 0x%08x, val - 0x%02x",
- (u32) & uccf->uf_regs->uccs, uccf->uf_regs->uccs);
- printk(KERN_INFO "urfb : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
- printk(KERN_INFO "urfs : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
- printk(KERN_INFO "urfet : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
- printk(KERN_INFO "urfset: addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->urfset,
- in_be16(&uccf->uf_regs->urfset));
- printk(KERN_INFO "utfb : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
- printk(KERN_INFO "utfs : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
- printk(KERN_INFO "utfet : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
- printk(KERN_INFO "utftt : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
- printk(KERN_INFO "utpt : addr - 0x%08x, val - 0x%04x",
- (u32) & uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
- printk(KERN_INFO "urtry : addr - 0x%08x, val - 0x%08x",
- (u32) & uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
- printk(KERN_INFO "guemr : addr - 0x%08x, val - 0x%02x",
- (u32) & uccf->uf_regs->guemr, uccf->uf_regs->guemr);
+ printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
+ printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
+
+ printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->gumr, in_be32(&uccf->uf_regs->gumr));
+ printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->upsmr, in_be32(&uccf->uf_regs->upsmr));
+ printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utodr, in_be16(&uccf->uf_regs->utodr));
+ printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->udsr, in_be16(&uccf->uf_regs->udsr));
+ printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->ucce, in_be32(&uccf->uf_regs->ucce));
+ printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->uccm, in_be32(&uccf->uf_regs->uccm));
+ printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->uccs, uccf->uf_regs->uccs);
+ printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urfb, in_be32(&uccf->uf_regs->urfb));
+ printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfs, in_be16(&uccf->uf_regs->urfs));
+ printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfet, in_be16(&uccf->uf_regs->urfet));
+ printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->urfset, in_be16(&uccf->uf_regs->urfset));
+ printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->utfb, in_be32(&uccf->uf_regs->utfb));
+ printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfs, in_be16(&uccf->uf_regs->utfs));
+ printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utfet, in_be16(&uccf->uf_regs->utfet));
+ printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utftt, in_be16(&uccf->uf_regs->utftt));
+ printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
+ &uccf->uf_regs->utpt, in_be16(&uccf->uf_regs->utpt));
+ printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
+ &uccf->uf_regs->urtry, in_be32(&uccf->uf_regs->urtry));
+ printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
+ &uccf->uf_regs->guemr, uccf->uf_regs->guemr);
}
EXPORT_SYMBOL(ucc_fast_dump_regs);
@@ -149,55 +148,57 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* check if the UCC port number is in range. */
if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
return -EINVAL;
}
/* Check that 'max_rx_buf_length' is properly aligned (4). */
if (uf_info->max_rx_buf_length & (UCC_FAST_MRBLR_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: max_rx_buf_length not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
+ __FUNCTION__);
return -EINVAL;
}
/* Validate Virtual Fifo register values */
if (uf_info->urfs < UCC_FAST_URFS_MIN_VAL) {
- printk(KERN_ERR "%s: urfs is too small", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is too small\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfs is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: urfs is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfet is not aligned.", __FUNCTION__);
+ printk(KERN_ERR "%s: urfet is not aligned.\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->urfset & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: urfset is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: urfset is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfs & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfs is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utfs is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utfet & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utfet is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utfet is not aligned\n", __FUNCTION__);
return -EINVAL;
}
if (uf_info->utftt & (UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT - 1)) {
- printk(KERN_ERR "%s: utftt is not aligned", __FUNCTION__);
+ printk(KERN_ERR "%s: utftt is not aligned\n", __FUNCTION__);
return -EINVAL;
}
uccf = kzalloc(sizeof(struct ucc_fast_private), GFP_KERNEL);
if (!uccf) {
- printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -206,7 +207,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
/* Set the PHY base address */
uccf->uf_regs = ioremap(uf_info->regs, sizeof(struct ucc_fast));
if (uccf->uf_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
return -ENOMEM;
}
@@ -226,18 +227,10 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
uccf->rx_discarded = 0;
#endif /* STATISTICS */
- /* Init Guemr register */
- if ((ret = ucc_init_guemr((struct ucc_common *) (uf_regs)))) {
- printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
- ucc_fast_free(uccf);
- return ret;
- }
-
/* Set UCC to fast type */
- if ((ret = ucc_set_type(uf_info->ucc_num,
- (struct ucc_common *) (uf_regs),
- UCC_SPEED_TYPE_FAST))) {
- printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
+ ret = ucc_set_type(uf_info->ucc_num, UCC_SPEED_TYPE_FAST);
+ if (ret) {
+ printk(KERN_ERR "%s: cannot set UCC type\n", __FUNCTION__);
ucc_fast_free(uccf);
return ret;
}
@@ -276,7 +269,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
uccf->ucc_fast_tx_virtual_fifo_base_offset =
qe_muram_alloc(uf_info->utfs, UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_tx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
+ __FUNCTION__);
uccf->ucc_fast_tx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -288,7 +282,8 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
UCC_FAST_RECEIVE_VIRTUAL_FIFO_SIZE_FUDGE_FACTOR,
UCC_FAST_VIRT_FIFO_REGS_ALIGNMENT);
if (IS_ERR_VALUE(uccf->ucc_fast_rx_virtual_fifo_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
+ __FUNCTION__);
uccf->ucc_fast_rx_virtual_fifo_base_offset = 0;
ucc_fast_free(uccf);
return -ENOMEM;
@@ -318,7 +313,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
if ((uf_info->rx_clock != QE_CLK_NONE) &&
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->rx_clock,
COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock",
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
__FUNCTION__);
ucc_fast_free(uccf);
return -EINVAL;
@@ -327,7 +322,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc
if ((uf_info->tx_clock != QE_CLK_NONE) &&
ucc_set_qe_mux_rxtx(uf_info->ucc_num, uf_info->tx_clock,
COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock",
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
__FUNCTION__);
ucc_fast_free(uccf);
return -EINVAL;
diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
index 1f65c26ce63..0174b3aeef8 100644
--- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c
+++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c
@@ -115,11 +115,15 @@ void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
out_be32(&us_regs->gumr_l, gumr_l);
}
+/* Initialize the UCC for Slow operations
+ *
+ * The caller should initialize the following us_info
+ */
int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
{
struct ucc_slow_private *uccs;
u32 i;
- struct ucc_slow *us_regs;
+ struct ucc_slow __iomem *us_regs;
u32 gumr;
struct qe_bd *bd;
u32 id;
@@ -131,7 +135,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* check if the UCC port number is in range. */
if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
- printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
+ printk(KERN_ERR "%s: illegal UCC number\n", __FUNCTION__);
return -EINVAL;
}
@@ -143,13 +147,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
*/
if ((!us_info->rfw) &&
(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
- printk(KERN_ERR "max_rx_buf_length not aligned.");
+ printk(KERN_ERR "max_rx_buf_length not aligned.\n");
return -EINVAL;
}
uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
if (!uccs) {
- printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot allocate private data\n",
+ __FUNCTION__);
return -ENOMEM;
}
@@ -158,7 +163,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Set the PHY base address */
uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
if (uccs->us_regs == NULL) {
- printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
+ printk(KERN_ERR "%s: Cannot map UCC registers\n", __FUNCTION__);
return -ENOMEM;
}
@@ -182,22 +187,14 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
return -ENOMEM;
}
id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, us_info->protocol,
uccs->us_pram_offset);
uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);
- /* Init Guemr register */
- if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
- printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
- ucc_slow_free(uccs);
- return ret;
- }
-
/* Set UCC to slow type */
- if ((ret = ucc_set_type(us_info->ucc_num,
- (struct ucc_common *) us_regs,
- UCC_SPEED_TYPE_SLOW))) {
+ ret = ucc_set_type(us_info->ucc_num, UCC_SPEED_TYPE_SLOW);
+ if (ret) {
printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
ucc_slow_free(uccs);
return ret;
@@ -212,7 +209,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
QE_ALIGNMENT_OF_BD);
if (IS_ERR_VALUE(uccs->rx_base_offset)) {
- printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
+ printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __FUNCTION__,
+ us_info->rx_bd_ring_len);
uccs->rx_base_offset = 0;
ucc_slow_free(uccs);
return -ENOMEM;
@@ -292,12 +290,12 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* if the data is in cachable memory, the 'global' */
/* in the function code should be set. */
- uccs->us_pram->tfcr = uccs->us_pram->rfcr =
- us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;
+ uccs->us_pram->tbmr = UCC_BMR_BO_BE;
+ uccs->us_pram->rbmr = UCC_BMR_BO_BE;
/* rbase, tbase are offsets from MURAM base */
- out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
- out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);
+ out_be16(&uccs->us_pram->rbase, uccs->rx_base_offset);
+ out_be16(&uccs->us_pram->tbase, uccs->tx_base_offset);
/* Mux clocking */
/* Grant Support */
@@ -311,7 +309,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Rx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
COMM_DIR_RX)) {
- printk(KERN_ERR "%s: illegal value for RX clock",
+ printk(KERN_ERR "%s: illegal value for RX clock\n",
__FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
@@ -319,7 +317,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
/* Tx clock routing */
if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
COMM_DIR_TX)) {
- printk(KERN_ERR "%s: illegal value for TX clock",
+ printk(KERN_ERR "%s: illegal value for TX clock\n",
__FUNCTION__);
ucc_slow_free(uccs);
return -EINVAL;
@@ -343,8 +341,8 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc
command = QE_INIT_TX;
else
command = QE_INIT_RX; /* We know at least one is TRUE */
- id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
- qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ qe_issue_cmd(command, id, us_info->protocol, 0);
*uccs_ret = uccs;
return 0;