summaryrefslogtreecommitdiffstats
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/ste-href-family-pinctrl.dtsi27
-rw-r--r--arch/arm/boot/dts/ste-href.dtsi6
-rw-r--r--arch/arm/boot/dts/ste-snowball.dts6
-rw-r--r--arch/arm/mach-ux500/board-mop500-pins.c19
4 files changed, 39 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
index ec990d8e102..779829a1e14 100644
--- a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
+++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi
@@ -604,6 +604,33 @@
};
};
};
+
+ mcde {
+ lcd_default_mode: lcd_default {
+ default_mux {
+ /* Mux in VSI0 and all the data lines */
+ ste,function = "lcd";
+ ste,pins =
+ "lcdvsi0_a_1", /* VSI0 for LCD */
+ "lcd_d0_d7_a_1", /* Data lines */
+ "lcd_d8_d11_a_1", /* TV-out */
+ "lcdaclk_b_1", /* Clock line for TV-out */
+ "lcdvsi1_a_1"; /* VSI1 for HDMI */
+ };
+ default_cfg1 {
+ ste,pins =
+ "GPIO68_E1", /* VSI0 */
+ "GPIO69_E2"; /* VSI1 */
+ ste,config = <&in_pu>;
+ };
+ };
+ lcd_sleep_mode: lcd_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO69_E2"; /* VSI1 */
+ ste,config = <&slpm_in_wkup_pdis>;
+ };
+ };
+ };
};
};
};
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4fda2d93348..56772c3ebb2 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -261,5 +261,11 @@
};
};
};
+
+ mcde@a0350000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_default_mode>;
+ pinctrl-1 = <&lcd_sleep_mode>;
+ };
};
};
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
index 4763b805e75..53febe58a1c 100644
--- a/arch/arm/boot/dts/ste-snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -362,5 +362,11 @@
};
};
};
+
+ mcde@a0350000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&lcd_default_mode>;
+ pinctrl-1 = <&lcd_sleep_mode>;
+ };
};
};
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 8fba58c98da..4cc4cb15147 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -46,8 +46,6 @@ BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED);
/* Sleep modes */
BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED|
- PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED|
PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED);
BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED|
@@ -325,23 +323,6 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = {
/* Pin control settings */
static struct pinctrl_map __initdata mop500_family_pinmap[] = {
- /*
- * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to
- * pull-up
- * TODO: is this really correct? Snowball doesn't have a LCD.
- */
- DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"),
- DB8500_PIN_HOG("GPIO68_E1", in_pu),
- DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu),
- /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */
- DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"),
- DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"),
- /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */
- DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"),
- DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
- /* LCD VSI1 sleep state */
- DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
-
/* ske default state */
DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"),
DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */