summaryrefslogtreecommitdiffstats
path: root/drivers/ata/ahci_xgene.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/ahci_xgene.c')
-rw-r--r--drivers/ata/ahci_xgene.c197
1 files changed, 191 insertions, 6 deletions
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c
index feeb8f1e2fe..2e8bb603e44 100644
--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -30,6 +30,8 @@
#include <linux/phy/phy.h>
#include "ahci.h"
+#define DRV_NAME "xgene-ahci"
+
/* Max # of disk per a controller */
#define MAX_AHCI_CHN_PERCTR 2
@@ -85,6 +87,7 @@ struct xgene_ahci_context {
struct ahci_host_priv *hpriv;
struct device *dev;
u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/
+ u32 class[MAX_AHCI_CHN_PERCTR]; /* tracking the class of device */
void __iomem *csr_core; /* Core CSR address of IP */
void __iomem *csr_diag; /* Diag CSR address of IP */
void __iomem *csr_axi; /* AXI CSR address of IP */
@@ -105,17 +108,69 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx)
}
/**
+ * xgene_ahci_poll_reg_val- Poll a register on a specific value.
+ * @ap : ATA port of interest.
+ * @reg : Register of interest.
+ * @val : Value to be attained.
+ * @interval : waiting interval for polling.
+ * @timeout : timeout for achieving the value.
+ */
+static int xgene_ahci_poll_reg_val(struct ata_port *ap,
+ void __iomem *reg, unsigned
+ int val, unsigned long interval,
+ unsigned long timeout)
+{
+ unsigned long deadline;
+ unsigned int tmp;
+
+ tmp = ioread32(reg);
+ deadline = ata_deadline(jiffies, timeout);
+
+ while (tmp != val && time_before(jiffies, deadline)) {
+ ata_msleep(ap, interval);
+ tmp = ioread32(reg);
+ }
+
+ return tmp;
+}
+
+/**
* xgene_ahci_restart_engine - Restart the dma engine.
* @ap : ATA port of interest
*
- * Restarts the dma engine inside the controller.
+ * Waits for completion of multiple commands and restarts
+ * the DMA engine inside the controller.
*/
static int xgene_ahci_restart_engine(struct ata_port *ap)
{
struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ u32 fbs;
+
+ /*
+ * In case of PMP multiple IDENTIFY DEVICE commands can be
+ * issued inside PxCI. So need to poll PxCI for the
+ * completion of outstanding IDENTIFY DEVICE commands before
+ * we restart the DMA engine.
+ */
+ if (xgene_ahci_poll_reg_val(ap, port_mmio +
+ PORT_CMD_ISSUE, 0x0, 1, 100))
+ return -EBUSY;
ahci_stop_engine(ap);
ahci_start_fis_rx(ap);
+
+ /*
+ * Enable the PxFBS.FBS_EN bit as it
+ * gets cleared due to stopping the engine.
+ */
+ if (pp->fbs_supported) {
+ fbs = readl(port_mmio + PORT_FBS);
+ writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS);
+ fbs = readl(port_mmio + PORT_FBS);
+ }
+
hpriv->start_engine(ap);
return 0;
@@ -129,6 +184,13 @@ static int xgene_ahci_restart_engine(struct ata_port *ap)
* clear the BSY bit after receiving the PIO setup FIS. This results in the dma
* state machine goes into the CMFatalErrorUpdate state and locks up. By
* restarting the dma engine, it removes the controller out of lock up state.
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The
+ * workaround is to write the pmp value to PxFBS.DEV field before issuing
+ * any command to PMP.
*/
static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
@@ -136,8 +198,23 @@ static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
struct ahci_host_priv *hpriv = ap->host->private_data;
struct xgene_ahci_context *ctx = hpriv->plat_data;
int rc = 0;
+ u32 port_fbs;
+ void *port_mmio = ahci_port_base(ap);
- if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
+ /*
+ * Write the pmp value to PxFBS.DEV
+ * for case of Port Mulitplier.
+ */
+ if (ctx->class[ap->port_no] == ATA_DEV_PMP) {
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+ }
+
+ if (unlikely((ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_PACKET) ||
+ (ctx->last_cmd[ap->port_no] == ATA_CMD_SMART)))
xgene_ahci_restart_engine(ap);
rc = ahci_qc_issue(qc);
@@ -188,7 +265,7 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev,
*
* Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
*/
- id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
+ id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
return 0;
}
@@ -363,16 +440,119 @@ static void xgene_ahci_host_stop(struct ata_host *host)
ahci_platform_disable_resources(hpriv);
}
+/**
+ * xgene_ahci_pmp_softreset - Issue the softreset to the drives connected
+ * to Port Multiplier.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP.
+ */
+static int xgene_ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+ struct ata_port *ap = link->ap;
+ u32 rc;
+ void *port_mmio = ahci_port_base(ap);
+ u32 port_fbs;
+
+ /*
+ * Set PxFBS.DEV field with pmp
+ * value.
+ */
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+
+ rc = ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+
+ return rc;
+}
+
+/**
+ * xgene_ahci_softreset - Issue the softreset to the drive.
+ * @link: link to reset
+ * @class: Return value to indicate class of device
+ * @deadline: deadline jiffies for the operation
+ *
+ * Due to H/W errata, the controller is unable to save the PMP
+ * field fetched from command header before sending the H2D FIS.
+ * When the device returns the PMP port field in the D2H FIS, there is
+ * a mismatch and results in command completion failure. The workaround
+ * is to write the pmp value to PxFBS.DEV field before issuing any command
+ * to PMP. Here is the algorithm to detect PMP :
+ *
+ * 1. Save the PxFBS value
+ * 2. Program PxFBS.DEV with pmp value send by framework. Framework sends
+ * 0xF for both PMP/NON-PMP initially
+ * 3. Issue softreset
+ * 4. If signature class is PMP goto 6
+ * 5. restore the original PxFBS and goto 3
+ * 6. return
+ */
+static int xgene_ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+ struct ata_port *ap = link->ap;
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct xgene_ahci_context *ctx = hpriv->plat_data;
+ void *port_mmio = ahci_port_base(ap);
+ u32 port_fbs;
+ u32 port_fbs_save;
+ u32 retry = 1;
+ u32 rc;
+
+ port_fbs_save = readl(port_mmio + PORT_FBS);
+
+ /*
+ * Set PxFBS.DEV field with pmp
+ * value.
+ */
+ port_fbs = readl(port_mmio + PORT_FBS);
+ port_fbs &= ~PORT_FBS_DEV_MASK;
+ port_fbs |= pmp << PORT_FBS_DEV_OFFSET;
+ writel(port_fbs, port_mmio + PORT_FBS);
+
+softreset_retry:
+ rc = ahci_do_softreset(link, class, pmp,
+ deadline, ahci_check_ready);
+
+ ctx->class[ap->port_no] = *class;
+ if (*class != ATA_DEV_PMP) {
+ /*
+ * Retry for normal drives without
+ * setting PxFBS.DEV field with pmp value.
+ */
+ if (retry--) {
+ writel(port_fbs_save, port_mmio + PORT_FBS);
+ goto softreset_retry;
+ }
+ }
+
+ return rc;
+}
+
static struct ata_port_operations xgene_ahci_ops = {
.inherits = &ahci_ops,
.host_stop = xgene_ahci_host_stop,
.hardreset = xgene_ahci_hardreset,
.read_id = xgene_ahci_read_id,
.qc_issue = xgene_ahci_qc_issue,
+ .softreset = xgene_ahci_softreset,
+ .pmp_softreset = xgene_ahci_pmp_softreset
};
static const struct ata_port_info xgene_ahci_port_info = {
- .flags = AHCI_FLAG_COMMON,
+ .flags = AHCI_FLAG_COMMON | ATA_FLAG_PMP,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &xgene_ahci_ops,
@@ -444,6 +624,10 @@ static int xgene_ahci_mux_select(struct xgene_ahci_context *ctx)
return val & CFG_SATA_ENET_SELECT_MASK ? -1 : 0;
}
+static struct scsi_host_template ahci_platform_sht = {
+ AHCI_SHT(DRV_NAME),
+};
+
static int xgene_ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -521,7 +705,8 @@ static int xgene_ahci_probe(struct platform_device *pdev)
skip_clk_phy:
hpriv->flags = AHCI_HFLAG_NO_PMP | AHCI_HFLAG_NO_NCQ;
- rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info);
+ rc = ahci_platform_init_host(pdev, hpriv, &xgene_ahci_port_info,
+ &ahci_platform_sht);
if (rc)
goto disable_resources;
@@ -543,7 +728,7 @@ static struct platform_driver xgene_ahci_driver = {
.probe = xgene_ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
- .name = "xgene-ahci",
+ .name = DRV_NAME,
.of_match_table = xgene_ahci_of_match,
},
};