diff options
Diffstat (limited to 'drivers/ata')
| -rw-r--r-- | drivers/ata/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/ata/ahci.c | 18 | ||||
| -rw-r--r-- | drivers/ata/libata-pmp.c | 7 | ||||
| -rw-r--r-- | drivers/ata/pata_imx.c | 8 | ||||
| -rw-r--r-- | drivers/ata/sata_mv.c | 12 | ||||
| -rw-r--r-- | drivers/ata/sata_sil.c | 1 |
6 files changed, 38 insertions, 9 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 4e737728aee..868429a47be 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -247,6 +247,7 @@ config SATA_HIGHBANK config SATA_MV tristate "Marvell SATA support" + select GENERIC_PHY help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] PCI(-X) chips, diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index dc2756fb6f3..c81d809c111 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -61,6 +61,7 @@ enum board_ids { /* board IDs by feature in alphabetical order */ board_ahci, board_ahci_ign_iferr, + board_ahci_noncq, board_ahci_nosntf, board_ahci_yes_fbs, @@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + [board_ahci_noncq] = { + AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, [board_ahci_nosntf] = { AHCI_HFLAGS (AHCI_HFLAG_NO_SNTF), .flags = AHCI_FLAG_COMMON, @@ -452,6 +460,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ + /* + * Samsung SSDs found on some macbooks. NCQ times out. + * https://bugzilla.kernel.org/show_bug.cgi?id=60731 + */ + { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq }, + /* Enmotus */ { PCI_DEVICE(0x1c44, 0x8000), board_ahci }, @@ -1170,8 +1184,10 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports, nvec = rc; rc = pci_enable_msi_block(pdev, nvec); - if (rc) + if (rc < 0) goto intx; + else if (rc > 0) + goto single_msi; return nvec; diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 20fd337a573..7ccc084bf1d 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -447,8 +447,11 @@ static void sata_pmp_quirks(struct ata_port *ap) * otherwise. Don't try hard to recover it. */ ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY; - } else if (vendor == 0x197b && devid == 0x2352) { - /* chip found in Thermaltake BlackX Duet, jmicron JMB350? */ + } else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) { + /* + * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350? + * 0x0325: jmicron JMB394. + */ ata_for_each_link(link, ap, EDGE) { /* SRST breaks detection and disks get misclassified * LPM disabled to avoid potential problems diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c index 26386f0b89a..b0b18ec5465 100644 --- a/drivers/ata/pata_imx.c +++ b/drivers/ata/pata_imx.c @@ -119,7 +119,9 @@ static int pata_imx_probe(struct platform_device *pdev) return PTR_ERR(priv->clk); } - clk_prepare_enable(priv->clk); + ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; host = ata_host_alloc(&pdev->dev, 1); if (!host) { @@ -212,7 +214,9 @@ static int pata_imx_resume(struct device *dev) struct ata_host *host = dev_get_drvdata(dev); struct pata_imx_priv *priv = host->private_data; - clk_prepare_enable(priv->clk); + int ret = clk_prepare_enable(priv->clk); + if (ret) + return ret; __raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 52b8181ddaf..05c8a44adf8 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -4104,7 +4104,6 @@ static int mv_platform_probe(struct platform_device *pdev) if (!hpriv->port_phys) return -ENOMEM; host->private_data = hpriv; - hpriv->n_ports = n_ports; hpriv->board_idx = chip_soc; host->iomap = NULL; @@ -4132,13 +4131,18 @@ static int mv_platform_probe(struct platform_device *pdev) rc = PTR_ERR(hpriv->port_phys[port]); hpriv->port_phys[port] = NULL; if (rc != -EPROBE_DEFER) - dev_warn(&pdev->dev, "error getting phy %d", - rc); + dev_warn(&pdev->dev, "error getting phy %d", rc); + + /* Cleanup only the initialized ports */ + hpriv->n_ports = port; goto err; } else phy_power_on(hpriv->port_phys[port]); } + /* All the ports have been initialized */ + hpriv->n_ports = n_ports; + /* * (Re-)program MBUS remapping windows if we are asked to. */ @@ -4176,7 +4180,7 @@ err: clk_disable_unprepare(hpriv->clk); clk_put(hpriv->clk); } - for (port = 0; port < n_ports; port++) { + for (port = 0; port < hpriv->n_ports; port++) { if (!IS_ERR(hpriv->port_clks[port])) { clk_disable_unprepare(hpriv->port_clks[port]); clk_put(hpriv->port_clks[port]); diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index d67fc351343..b7695e80463 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -157,6 +157,7 @@ static const struct sil_drivelist { { "ST380011ASL", SIL_QUIRK_MOD15WRITE }, { "ST3120022ASL", SIL_QUIRK_MOD15WRITE }, { "ST3160021ASL", SIL_QUIRK_MOD15WRITE }, + { "TOSHIBA MK2561GSYN", SIL_QUIRK_MOD15WRITE }, { "Maxtor 4D060H3", SIL_QUIRK_UDMA5MAX }, { } }; |