summaryrefslogtreecommitdiffstats
path: root/drivers/cpufreq/imx6q-cpufreq.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/cpufreq/imx6q-cpufreq.c')
-rw-r--r--drivers/cpufreq/imx6q-cpufreq.c117
1 files changed, 34 insertions, 83 deletions
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index c3fd2a101ca..4b3f18e5f36 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -13,7 +13,7 @@
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/opp.h>
+#include <linux/pm_opp.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
@@ -35,73 +35,52 @@ static struct device *cpu_dev;
static struct cpufreq_frequency_table *freq_table;
static unsigned int transition_latency;
-static int imx6q_verify_speed(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
static unsigned int imx6q_get_speed(unsigned int cpu)
{
return clk_get_rate(arm_clk) / 1000;
}
-static int imx6q_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq, unsigned int relation)
+static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
{
- struct cpufreq_freqs freqs;
- struct opp *opp;
+ struct dev_pm_opp *opp;
unsigned long freq_hz, volt, volt_old;
- unsigned int index;
+ unsigned int old_freq, new_freq;
int ret;
- ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
- relation, &index);
- if (ret) {
- dev_err(cpu_dev, "failed to match target frequency %d: %d\n",
- target_freq, ret);
- return ret;
- }
-
- freqs.new = freq_table[index].frequency;
- freq_hz = freqs.new * 1000;
- freqs.old = clk_get_rate(arm_clk) / 1000;
-
- if (freqs.old == freqs.new)
- return 0;
+ new_freq = freq_table[index].frequency;
+ freq_hz = new_freq * 1000;
+ old_freq = clk_get_rate(arm_clk) / 1000;
rcu_read_lock();
- opp = opp_find_freq_ceil(cpu_dev, &freq_hz);
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &freq_hz);
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(cpu_dev, "failed to find OPP for %ld\n", freq_hz);
return PTR_ERR(opp);
}
- volt = opp_get_voltage(opp);
+ volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
volt_old = regulator_get_voltage(arm_reg);
dev_dbg(cpu_dev, "%u MHz, %ld mV --> %u MHz, %ld mV\n",
- freqs.old / 1000, volt_old / 1000,
- freqs.new / 1000, volt / 1000);
-
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
+ old_freq / 1000, volt_old / 1000,
+ new_freq / 1000, volt / 1000);
/* scaling up? scale voltage before frequency */
- if (freqs.new > freqs.old) {
+ if (new_freq > old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_err(cpu_dev,
"failed to scale vddarm up: %d\n", ret);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/*
* Need to increase vddpu and vddsoc for safety
* if we are about to run at 1.2 GHz.
*/
- if (freqs.new == FREQ_1P2_GHZ / 1000) {
+ if (new_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_HIGH, 0);
regulator_set_voltage_tol(soc_reg,
@@ -121,21 +100,20 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
clk_set_parent(step_clk, pll2_pfd2_396m_clk);
clk_set_parent(pll1_sw_clk, step_clk);
if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
- clk_set_rate(pll1_sys_clk, freqs.new * 1000);
+ clk_set_rate(pll1_sys_clk, new_freq * 1000);
clk_set_parent(pll1_sw_clk, pll1_sys_clk);
}
/* Ensure the arm clock divider is what we expect */
- ret = clk_set_rate(arm_clk, freqs.new * 1000);
+ ret = clk_set_rate(arm_clk, new_freq * 1000);
if (ret) {
dev_err(cpu_dev, "failed to set clock rate: %d\n", ret);
regulator_set_voltage_tol(arm_reg, volt_old, 0);
- freqs.new = freqs.old;
- goto post_notify;
+ return ret;
}
/* scaling down? scale voltage after frequency */
- if (freqs.new < freqs.old) {
+ if (new_freq < old_freq) {
ret = regulator_set_voltage_tol(arm_reg, volt, 0);
if (ret) {
dev_warn(cpu_dev,
@@ -143,7 +121,7 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
ret = 0;
}
- if (freqs.old == FREQ_1P2_GHZ / 1000) {
+ if (old_freq == FREQ_1P2_GHZ / 1000) {
regulator_set_voltage_tol(pu_reg,
PU_SOC_VOLTAGE_NORMAL, 0);
regulator_set_voltage_tol(soc_reg,
@@ -151,55 +129,28 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
}
}
-post_notify:
- cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
-}
-
-static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
-{
- int ret;
-
- ret = cpufreq_frequency_table_cpuinfo(policy, freq_table);
- if (ret) {
- dev_err(cpu_dev, "invalid frequency table: %d\n", ret);
- return ret;
- }
-
- policy->cpuinfo.transition_latency = transition_latency;
- policy->cur = clk_get_rate(arm_clk) / 1000;
- cpumask_setall(policy->cpus);
- cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
-
return 0;
}
-static int imx6q_cpufreq_exit(struct cpufreq_policy *policy)
+static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
{
- cpufreq_frequency_table_put_attr(policy->cpu);
- return 0;
+ return cpufreq_generic_init(policy, freq_table, transition_latency);
}
-static struct freq_attr *imx6q_cpufreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-
static struct cpufreq_driver imx6q_cpufreq_driver = {
- .verify = imx6q_verify_speed,
- .target = imx6q_set_target,
+ .verify = cpufreq_generic_frequency_table_verify,
+ .target_index = imx6q_set_target,
.get = imx6q_get_speed,
.init = imx6q_cpufreq_init,
- .exit = imx6q_cpufreq_exit,
+ .exit = cpufreq_generic_exit,
.name = "imx6q-cpufreq",
- .attr = imx6q_cpufreq_attr,
+ .attr = cpufreq_generic_attr,
};
static int imx6q_cpufreq_probe(struct platform_device *pdev)
{
struct device_node *np;
- struct opp *opp;
+ struct dev_pm_opp *opp;
unsigned long min_volt, max_volt;
int num, ret;
@@ -237,14 +188,14 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
}
/* We expect an OPP table supplied by platform */
- num = opp_get_opp_count(cpu_dev);
+ num = dev_pm_opp_get_opp_count(cpu_dev);
if (num < 0) {
ret = num;
dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
goto put_node;
}
- ret = opp_init_cpufreq_table(cpu_dev, &freq_table);
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto put_node;
@@ -259,12 +210,12 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
* same order.
*/
rcu_read_lock();
- opp = opp_find_freq_exact(cpu_dev,
+ opp = dev_pm_opp_find_freq_exact(cpu_dev,
freq_table[0].frequency * 1000, true);
- min_volt = opp_get_voltage(opp);
- opp = opp_find_freq_exact(cpu_dev,
+ min_volt = dev_pm_opp_get_voltage(opp);
+ opp = dev_pm_opp_find_freq_exact(cpu_dev,
freq_table[--num].frequency * 1000, true);
- max_volt = opp_get_voltage(opp);
+ max_volt = dev_pm_opp_get_voltage(opp);
rcu_read_unlock();
ret = regulator_set_voltage_time(arm_reg, min_volt, max_volt);
if (ret > 0)
@@ -292,7 +243,7 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
return 0;
free_freq_table:
- opp_free_cpufreq_table(cpu_dev, &freq_table);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
put_node:
of_node_put(np);
return ret;
@@ -301,7 +252,7 @@ put_node:
static int imx6q_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&imx6q_cpufreq_driver);
- opp_free_cpufreq_table(cpu_dev, &freq_table);
+ dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
return 0;
}