summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_ddi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/i915/intel_ddi.c')
-rw-r--r--drivers/gpu/drm/i915/intel_ddi.c79
1 files changed, 59 insertions, 20 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 4bad0f72401..d64af5aa4a1 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -84,7 +84,8 @@ static enum port intel_ddi_get_encoder_port(struct intel_encoder *intel_encoder)
* in either FDI or DP modes only, as HDMI connections will work with both
* of those
*/
-void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port, bool use_fdi_mode)
+static void intel_prepare_ddi_buffers(struct drm_device *dev, enum port port,
+ bool use_fdi_mode)
{
struct drm_i915_private *dev_priv = dev->dev_private;
u32 reg;
@@ -114,16 +115,17 @@ void intel_prepare_ddi(struct drm_device *dev)
{
int port;
- if (IS_HASWELL(dev)) {
- for (port = PORT_A; port < PORT_E; port++)
- intel_prepare_ddi_buffers(dev, port, false);
+ if (!HAS_DDI(dev))
+ return;
- /* DDI E is the suggested one to work in FDI mode, so program is as such by
- * default. It will have to be re-programmed in case a digital DP output
- * will be detected on it
- */
- intel_prepare_ddi_buffers(dev, PORT_E, true);
- }
+ for (port = PORT_A; port < PORT_E; port++)
+ intel_prepare_ddi_buffers(dev, port, false);
+
+ /* DDI E is the suggested one to work in FDI mode, so program is as such
+ * by default. It will have to be re-programmed in case a digital DP
+ * output will be detected on it
+ */
+ intel_prepare_ddi_buffers(dev, PORT_E, true);
}
static const long hsw_ddi_buf_ctl_values[] = {
@@ -178,10 +180,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
/* Enable the PCH Receiver FDI PLL */
- rx_ctl_val = FDI_RX_PLL_ENABLE | FDI_RX_ENHANCE_FRAME_ENABLE |
- ((intel_crtc->fdi_lanes - 1) << 19);
- if (dev_priv->fdi_rx_polarity_reversed)
- rx_ctl_val |= FDI_RX_POLARITY_REVERSED_LPT;
+ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
+ FDI_RX_PLL_ENABLE | ((intel_crtc->fdi_lanes - 1) << 19);
I915_WRITE(_FDI_RXA_CTL, rx_ctl_val);
POSTING_READ(_FDI_RXA_CTL);
udelay(220);
@@ -203,7 +203,10 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
- /* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
+ /* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
+ * DDI E does not support port reversal, the functionality is
+ * achieved on the PCH side in FDI_RX_CTL, so no need to set the
+ * port reversal bit */
I915_WRITE(DDI_BUF_CTL(PORT_E),
DDI_BUF_CTL_ENABLE |
((intel_crtc->fdi_lanes - 1) << 1) |
@@ -675,10 +678,14 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder,
DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n",
port_name(port), pipe_name(pipe));
+ intel_crtc->eld_vld = false;
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+ struct intel_digital_port *intel_dig_port =
+ enc_to_dig_port(encoder);
- intel_dp->DP = DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
+ intel_dp->DP = intel_dig_port->port_reversal |
+ DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW;
switch (intel_dp->lane_count) {
case 1:
intel_dp->DP |= DDI_PORT_WIDTH_X1;
@@ -985,7 +992,13 @@ void intel_ddi_enable_pipe_func(struct drm_crtc *crtc)
if (cpu_transcoder == TRANSCODER_EDP) {
switch (pipe) {
case PIPE_A:
- temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+ /* Can only use the always-on power well for eDP when
+ * not using the panel fitter, and when not using motion
+ * blur mitigation (which we don't support). */
+ if (dev_priv->pch_pf_size)
+ temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
+ else
+ temp |= TRANS_DDI_EDP_INPUT_A_ON;
break;
case PIPE_B:
temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
@@ -1069,7 +1082,7 @@ bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
if (port == PORT_A)
cpu_transcoder = TRANSCODER_EDP;
else
- cpu_transcoder = pipe;
+ cpu_transcoder = (enum transcoder) pipe;
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
@@ -1285,34 +1298,58 @@ static void intel_ddi_post_disable(struct intel_encoder *intel_encoder)
static void intel_enable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
struct drm_device *dev = encoder->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
enum port port = intel_ddi_get_encoder_port(intel_encoder);
int type = intel_encoder->type;
+ uint32_t tmp;
if (type == INTEL_OUTPUT_HDMI) {
+ struct intel_digital_port *intel_dig_port =
+ enc_to_dig_port(encoder);
+
/* In HDMI/DVI mode, the port width, and swing/emphasis values
* are ignored so nothing special needs to be done besides
* enabling the port.
*/
- I915_WRITE(DDI_BUF_CTL(port), DDI_BUF_CTL_ENABLE);
+ I915_WRITE(DDI_BUF_CTL(port),
+ intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE);
} else if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_backlight_on(intel_dp);
}
+
+ if (intel_crtc->eld_vld) {
+ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+ tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+ I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
+ }
}
static void intel_disable_ddi(struct intel_encoder *intel_encoder)
{
struct drm_encoder *encoder = &intel_encoder->base;
+ struct drm_crtc *crtc = encoder->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
int type = intel_encoder->type;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t tmp;
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
ironlake_edp_backlight_off(intel_dp);
}
+
+ tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD);
+ tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4));
+ I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp);
}
int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv)
@@ -1452,11 +1489,11 @@ static const struct drm_encoder_funcs intel_ddi_funcs = {
static const struct drm_encoder_helper_funcs intel_ddi_helper_funcs = {
.mode_fixup = intel_ddi_mode_fixup,
.mode_set = intel_ddi_mode_set,
- .disable = intel_encoder_noop,
};
void intel_ddi_init(struct drm_device *dev, enum port port)
{
+ struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_digital_port *intel_dig_port;
struct intel_encoder *intel_encoder;
struct drm_encoder *encoder;
@@ -1497,6 +1534,8 @@ void intel_ddi_init(struct drm_device *dev, enum port port)
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
intel_dig_port->port = port;
+ intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) &
+ DDI_BUF_PORT_REVERSAL;
if (hdmi_connector)
intel_dig_port->hdmi.sdvox_reg = DDI_BUF_CTL(port);
else