diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 1847 |
1 files changed, 1208 insertions, 639 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 49fb54fd9a1..3106c0dc838 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -989,7 +989,7 @@ intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, void intel_wait_for_vblank(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; - int pipestat_reg = (pipe == 0 ? PIPEASTAT : PIPEBSTAT); + int pipestat_reg = PIPESTAT(pipe); /* Clear existing vblank status. Note this will clear any other * sticky status fields as well. @@ -1058,6 +1058,612 @@ void intel_wait_for_pipe_off(struct drm_device *dev, int pipe) } } +static const char *state_string(bool enabled) +{ + return enabled ? "on" : "off"; +} + +/* Only for pre-ILK configs */ +static void assert_pll(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + int reg; + u32 val; + bool cur_state; + + reg = DPLL(pipe); + val = I915_READ(reg); + cur_state = !!(val & DPLL_VCO_ENABLE); + WARN(cur_state != state, + "PLL state assertion failure (expected %s, current %s)\n", + state_string(state), state_string(cur_state)); +} +#define assert_pll_enabled(d, p) assert_pll(d, p, true) +#define assert_pll_disabled(d, p) assert_pll(d, p, false) + +/* For ILK+ */ +static void assert_pch_pll(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + int reg; + u32 val; + bool cur_state; + + reg = PCH_DPLL(pipe); + val = I915_READ(reg); + cur_state = !!(val & DPLL_VCO_ENABLE); + WARN(cur_state != state, + "PCH PLL state assertion failure (expected %s, current %s)\n", + state_string(state), state_string(cur_state)); +} +#define assert_pch_pll_enabled(d, p) assert_pch_pll(d, p, true) +#define assert_pch_pll_disabled(d, p) assert_pch_pll(d, p, false) + +static void assert_fdi_tx(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + int reg; + u32 val; + bool cur_state; + + reg = FDI_TX_CTL(pipe); + val = I915_READ(reg); + cur_state = !!(val & FDI_TX_ENABLE); + WARN(cur_state != state, + "FDI TX state assertion failure (expected %s, current %s)\n", + state_string(state), state_string(cur_state)); +} +#define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true) +#define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false) + +static void assert_fdi_rx(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + int reg; + u32 val; + bool cur_state; + + reg = FDI_RX_CTL(pipe); + val = I915_READ(reg); + cur_state = !!(val & FDI_RX_ENABLE); + WARN(cur_state != state, + "FDI RX state assertion failure (expected %s, current %s)\n", + state_string(state), state_string(cur_state)); +} +#define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true) +#define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false) + +static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* ILK FDI PLL is always enabled */ + if (dev_priv->info->gen == 5) + return; + + reg = FDI_TX_CTL(pipe); + val = I915_READ(reg); + WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n"); +} + +static void assert_fdi_rx_pll_enabled(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + reg = FDI_RX_CTL(pipe); + val = I915_READ(reg); + WARN(!(val & FDI_RX_PLL_ENABLE), "FDI RX PLL assertion failure, should be active but is disabled\n"); +} + +static void assert_panel_unlocked(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int pp_reg, lvds_reg; + u32 val; + enum pipe panel_pipe = PIPE_A; + bool locked = locked; + + if (HAS_PCH_SPLIT(dev_priv->dev)) { + pp_reg = PCH_PP_CONTROL; + lvds_reg = PCH_LVDS; + } else { + pp_reg = PP_CONTROL; + lvds_reg = LVDS; + } + + val = I915_READ(pp_reg); + if (!(val & PANEL_POWER_ON) || + ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)) + locked = false; + + if (I915_READ(lvds_reg) & LVDS_PIPEB_SELECT) + panel_pipe = PIPE_B; + + WARN(panel_pipe == pipe && locked, + "panel assertion failure, pipe %c regs locked\n", + pipe_name(pipe)); +} + +static void assert_pipe(struct drm_i915_private *dev_priv, + enum pipe pipe, bool state) +{ + int reg; + u32 val; + bool cur_state; + + reg = PIPECONF(pipe); + val = I915_READ(reg); + cur_state = !!(val & PIPECONF_ENABLE); + WARN(cur_state != state, + "pipe %c assertion failure (expected %s, current %s)\n", + pipe_name(pipe), state_string(state), state_string(cur_state)); +} +#define assert_pipe_enabled(d, p) assert_pipe(d, p, true) +#define assert_pipe_disabled(d, p) assert_pipe(d, p, false) + +static void assert_plane_enabled(struct drm_i915_private *dev_priv, + enum plane plane) +{ + int reg; + u32 val; + + reg = DSPCNTR(plane); + val = I915_READ(reg); + WARN(!(val & DISPLAY_PLANE_ENABLE), + "plane %c assertion failure, should be active but is disabled\n", + plane_name(plane)); +} + +static void assert_planes_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg, i; + u32 val; + int cur_pipe; + + /* Planes are fixed to pipes on ILK+ */ + if (HAS_PCH_SPLIT(dev_priv->dev)) + return; + + /* Need to check both planes against the pipe */ + for (i = 0; i < 2; i++) { + reg = DSPCNTR(i); + val = I915_READ(reg); + cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> + DISPPLANE_SEL_PIPE_SHIFT; + WARN((val & DISPLAY_PLANE_ENABLE) && pipe == cur_pipe, + "plane %c assertion failure, should be off on pipe %c but is still active\n", + plane_name(i), pipe_name(pipe)); + } +} + +static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) +{ + u32 val; + bool enabled; + + val = I915_READ(PCH_DREF_CONTROL); + enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | + DREF_SUPERSPREAD_SOURCE_MASK)); + WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); +} + +static void assert_transcoder_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + bool enabled; + + reg = TRANSCONF(pipe); + val = I915_READ(reg); + enabled = !!(val & TRANS_ENABLE); + WARN(enabled, + "transcoder assertion failed, should be off on pipe %c but is still active\n", + pipe_name(pipe)); +} + +static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe, int reg) +{ + u32 val = I915_READ(reg); + WARN(DP_PIPE_ENABLED(val, pipe), + "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", + reg, pipe_name(pipe)); +} + +static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe, int reg) +{ + u32 val = I915_READ(reg); + WARN(HDMI_PIPE_ENABLED(val, pipe), + "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", + reg, pipe_name(pipe)); +} + +static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_B); + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_C); + assert_pch_dp_disabled(dev_priv, pipe, PCH_DP_D); + + reg = PCH_ADPA; + val = I915_READ(reg); + WARN(ADPA_PIPE_ENABLED(val, pipe), + "PCH VGA enabled on transcoder %c, should be disabled\n", + pipe_name(pipe)); + + reg = PCH_LVDS; + val = I915_READ(reg); + WARN(LVDS_PIPE_ENABLED(val, pipe), + "PCH LVDS enabled on transcoder %c, should be disabled\n", + pipe_name(pipe)); + + assert_pch_hdmi_disabled(dev_priv, pipe, HDMIB); + assert_pch_hdmi_disabled(dev_priv, pipe, HDMIC); + assert_pch_hdmi_disabled(dev_priv, pipe, HDMID); +} + +/** + * intel_enable_pll - enable a PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to enable + * + * Enable @pipe's PLL so we can start pumping pixels from a plane. Check to + * make sure the PLL reg is writable first though, since the panel write + * protect mechanism may be enabled. + * + * Note! This is for pre-ILK only. + */ +static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + int reg; + u32 val; + + /* No really, not for ILK+ */ + BUG_ON(dev_priv->info->gen >= 5); + + /* PLL is protected by panel, make sure we can write it */ + if (IS_MOBILE(dev_priv->dev) && !IS_I830(dev_priv->dev)) + assert_panel_unlocked(dev_priv, pipe); + + reg = DPLL(pipe); + val = I915_READ(reg); + val |= DPLL_VCO_ENABLE; + + /* We do this three times for luck */ + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(150); /* wait for warmup */ + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(150); /* wait for warmup */ + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(150); /* wait for warmup */ +} + +/** + * intel_disable_pll - disable a PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to disable + * + * Disable the PLL for @pipe, making sure the pipe is off first. + * + * Note! This is for pre-ILK only. + */ +static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + int reg; + u32 val; + + /* Don't disable pipe A or pipe A PLLs if needed */ + if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + /* Make sure the pipe isn't still relying on us */ + assert_pipe_disabled(dev_priv, pipe); + + reg = DPLL(pipe); + val = I915_READ(reg); + val &= ~DPLL_VCO_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); +} + +/** + * intel_enable_pch_pll - enable PCH PLL + * @dev_priv: i915 private structure + * @pipe: pipe PLL to enable + * + * The PCH PLL needs to be enabled before the PCH transcoder, since it + * drives the transcoder clock. + */ +static void intel_enable_pch_pll(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* PCH only available on ILK+ */ + BUG_ON(dev_priv->info->gen < 5); + + /* PCH refclock must be enabled first */ + assert_pch_refclk_enabled(dev_priv); + + reg = PCH_DPLL(pipe); + val = I915_READ(reg); + val |= DPLL_VCO_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(200); +} + +static void intel_disable_pch_pll(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* PCH only available on ILK+ */ + BUG_ON(dev_priv->info->gen < 5); + + /* Make sure transcoder isn't still depending on us */ + assert_transcoder_disabled(dev_priv, pipe); + + reg = PCH_DPLL(pipe); + val = I915_READ(reg); + val &= ~DPLL_VCO_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(200); +} + +static void intel_enable_transcoder(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* PCH only available on ILK+ */ + BUG_ON(dev_priv->info->gen < 5); + + /* Make sure PCH DPLL is enabled */ + assert_pch_pll_enabled(dev_priv, pipe); + + /* FDI must be feeding us bits for PCH ports */ + assert_fdi_tx_enabled(dev_priv, pipe); + assert_fdi_rx_enabled(dev_priv, pipe); + + reg = TRANSCONF(pipe); + val = I915_READ(reg); + /* + * make the BPC in transcoder be consistent with + * that in pipeconf reg. + */ + val &= ~PIPE_BPC_MASK; + val |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; + I915_WRITE(reg, val | TRANS_ENABLE); + if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) + DRM_ERROR("failed to enable transcoder %d\n", pipe); +} + +static void intel_disable_transcoder(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* FDI relies on the transcoder */ + assert_fdi_tx_disabled(dev_priv, pipe); + assert_fdi_rx_disabled(dev_priv, pipe); + + /* Ports must be off as well */ + assert_pch_ports_disabled(dev_priv, pipe); + + reg = TRANSCONF(pipe); + val = I915_READ(reg); + val &= ~TRANS_ENABLE; + I915_WRITE(reg, val); + /* wait for PCH transcoder off, transcoder state */ + if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) + DRM_ERROR("failed to disable transcoder\n"); +} + +/** + * intel_enable_pipe - enable a pipe, asserting requirements + * @dev_priv: i915 private structure + * @pipe: pipe to enable + * @pch_port: on ILK+, is this pipe driving a PCH port or not + * + * Enable @pipe, making sure that various hardware specific requirements + * are met, if applicable, e.g. PLL enabled, LVDS pairs enabled, etc. + * + * @pipe should be %PIPE_A or %PIPE_B. + * + * Will wait until the pipe is actually running (i.e. first vblank) before + * returning. + */ +static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, + bool pch_port) +{ + int reg; + u32 val; + + /* + * A pipe without a PLL won't actually be able to drive bits from + * a plane. On ILK+ the pipe PLLs are integrated, so we don't + * need the check. + */ + if (!HAS_PCH_SPLIT(dev_priv->dev)) + assert_pll_enabled(dev_priv, pipe); + else { + if (pch_port) { + /* if driving the PCH, we need FDI enabled */ + assert_fdi_rx_pll_enabled(dev_priv, pipe); + assert_fdi_tx_pll_enabled(dev_priv, pipe); + } + /* FIXME: assert CPU port conditions for SNB+ */ + } + + reg = PIPECONF(pipe); + val = I915_READ(reg); + val |= PIPECONF_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + intel_wait_for_vblank(dev_priv->dev, pipe); +} + +/** + * intel_disable_pipe - disable a pipe, asserting requirements + * @dev_priv: i915 private structure + * @pipe: pipe to disable + * + * Disable @pipe, making sure that various hardware specific requirements + * are met, if applicable, e.g. plane disabled, panel fitter off, etc. + * + * @pipe should be %PIPE_A or %PIPE_B. + * + * Will wait until the pipe has shut down before returning. + */ +static void intel_disable_pipe(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + int reg; + u32 val; + + /* + * Make sure planes won't keep trying to pump pixels to us, + * or we might hang the display. + */ + assert_planes_disabled(dev_priv, pipe); + + /* Don't disable pipe A or pipe A PLLs if needed */ + if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) + return; + + reg = PIPECONF(pipe); + val = I915_READ(reg); + val &= ~PIPECONF_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + intel_wait_for_pipe_off(dev_priv->dev, pipe); +} + +/** + * intel_enable_plane - enable a display plane on a given pipe + * @dev_priv: i915 private structure + * @plane: plane to enable + * @pipe: pipe being fed + * + * Enable @plane on @pipe, making sure that @pipe is running first. + */ +static void intel_enable_plane(struct drm_i915_private *dev_priv, + enum plane plane, enum pipe pipe) +{ + int reg; + u32 val; + + /* If the pipe isn't enabled, we can't pump pixels and may hang */ + assert_pipe_enabled(dev_priv, pipe); + + reg = DSPCNTR(plane); + val = I915_READ(reg); + val |= DISPLAY_PLANE_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + intel_wait_for_vblank(dev_priv->dev, pipe); +} + +/* + * Plane regs are double buffered, going from enabled->disabled needs a + * trigger in order to latch. The display address reg provides this. + */ +static void intel_flush_display_plane(struct drm_i915_private *dev_priv, + enum plane plane) +{ + u32 reg = DSPADDR(plane); + I915_WRITE(reg, I915_READ(reg)); +} + +/** + * intel_disable_plane - disable a display plane + * @dev_priv: i915 private structure + * @plane: plane to disable + * @pipe: pipe consuming the data + * + * Disable @plane; should be an independent operation. + */ +static void intel_disable_plane(struct drm_i915_private *dev_priv, + enum plane plane, enum pipe pipe) +{ + int reg; + u32 val; + + reg = DSPCNTR(plane); + val = I915_READ(reg); + val &= ~DISPLAY_PLANE_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + intel_flush_display_plane(dev_priv, plane); + intel_wait_for_vblank(dev_priv->dev, pipe); +} + +static void disable_pch_dp(struct drm_i915_private *dev_priv, + enum pipe pipe, int reg) +{ + u32 val = I915_READ(reg); + if (DP_PIPE_ENABLED(val, pipe)) + I915_WRITE(reg, val & ~DP_PORT_EN); +} + +static void disable_pch_hdmi(struct drm_i915_private *dev_priv, + enum pipe pipe, int reg) +{ + u32 val = I915_READ(reg); + if (HDMI_PIPE_ENABLED(val, pipe)) + I915_WRITE(reg, val & ~PORT_ENABLE); +} + +/* Disable any ports connected to this transcoder */ +static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, + enum pipe pipe) +{ + u32 reg, val; + + val = I915_READ(PCH_PP_CONTROL); + I915_WRITE(PCH_PP_CONTROL, val | PANEL_UNLOCK_REGS); + + disable_pch_dp(dev_priv, pipe, PCH_DP_B); + disable_pch_dp(dev_priv, pipe, PCH_DP_C); + disable_pch_dp(dev_priv, pipe, PCH_DP_D); + + reg = PCH_ADPA; + val = I915_READ(reg); + if (ADPA_PIPE_ENABLED(val, pipe)) + I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); + + reg = PCH_LVDS; + val = I915_READ(reg); + if (LVDS_PIPE_ENABLED(val, pipe)) { + I915_WRITE(reg, val & ~LVDS_PORT_EN); + POSTING_READ(reg); + udelay(100); + } + + disable_pch_hdmi(dev_priv, pipe, HDMIB); + disable_pch_hdmi(dev_priv, pipe, HDMIC); + disable_pch_hdmi(dev_priv, pipe, HDMID); +} + static void i8xx_enable_fbc(struct drm_crtc *crtc, unsigned long interval) { struct drm_device *dev = crtc->dev; @@ -1390,7 +1996,7 @@ static void intel_update_fbc(struct drm_device *dev) * - going to an unsupported config (interlace, pixel multiply, etc.) */ list_for_each_entry(tmp_crtc, &dev->mode_config.crtc_list, head) { - if (tmp_crtc->enabled) { + if (tmp_crtc->enabled && tmp_crtc->fb) { if (crtc) { DRM_DEBUG_KMS("more than one pipe active, disabling compression\n"); dev_priv->no_fbc_reason = FBC_MULTIPLE_PIPES; @@ -1461,6 +2067,7 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, struct drm_i915_gem_object *obj, struct intel_ring_buffer *pipelined) { + struct drm_i915_private *dev_priv = dev->dev_private; u32 alignment; int ret; @@ -1485,9 +2092,10 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, BUG(); } + dev_priv->mm.interruptible = false; ret = i915_gem_object_pin(obj, alignment, true); if (ret) - return ret; + goto err_interruptible; ret = i915_gem_object_set_to_display_plane(obj, pipelined); if (ret) @@ -1499,15 +2107,18 @@ intel_pin_and_fence_fb_obj(struct drm_device *dev, * a fence as the cost is not that onerous. */ if (obj->tiling_mode != I915_TILING_NONE) { - ret = i915_gem_object_get_fence(obj, pipelined, false); + ret = i915_gem_object_get_fence(obj, pipelined); if (ret) goto err_unpin; } + dev_priv->mm.interruptible = true; return 0; err_unpin: i915_gem_object_unpin(obj); +err_interruptible: + dev_priv->mm.interruptible = true; return ret; } @@ -1641,7 +2252,7 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, * This should only fail upon a hung GPU, in which case we * can safely continue. */ - ret = i915_gem_object_flush_gpu(obj, false); + ret = i915_gem_object_flush_gpu(obj); (void) ret; } @@ -1753,8 +2364,13 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; u32 reg, temp, tries; + /* FDI needs bits from pipe & plane first */ + assert_pipe_enabled(dev_priv, pipe); + assert_plane_enabled(dev_priv, plane); + /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit for train result */ reg = FDI_RX_IMR(pipe); @@ -1784,7 +2400,11 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) udelay(150); /* Ironlake workaround, enable clock pointer after FDI enable*/ - I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_ENABLE); + if (HAS_PCH_IBX(dev)) { + I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); + I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR | + FDI_RX_PHASE_SYNC_POINTER_EN); + } reg = FDI_RX_IIR(pipe); for (tries = 0; tries < 5; tries++) { @@ -1834,7 +2454,7 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) } -static const int const snb_b_fdi_train_param [] = { +static const int snb_b_fdi_train_param [] = { FDI_LINK_TRAIN_400MV_0DB_SNB_B, FDI_LINK_TRAIN_400MV_6DB_SNB_B, FDI_LINK_TRAIN_600MV_3_5DB_SNB_B, @@ -2003,12 +2623,60 @@ static void ironlake_fdi_enable(struct drm_crtc *crtc) } } -static void intel_flush_display_plane(struct drm_device *dev, - int plane) +static void ironlake_fdi_disable(struct drm_crtc *crtc) { + struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; - u32 reg = DSPADDR(plane); - I915_WRITE(reg, I915_READ(reg)); + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + u32 reg, temp; + + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) { + I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR); + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_EN)); + } + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); } /* @@ -2070,114 +2738,21 @@ static bool intel_crtc_driving_pch(struct drm_crtc *crtc) return true; } -static void ironlake_crtc_enable(struct drm_crtc *crtc) +/* + * Enable PCH resources required for PCH ports: + * - PCH PLLs + * - FDI training & RX/TX + * - update transcoder timings + * - DP transcoding bits + * - transcoder + */ +static void ironlake_pch_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int plane = intel_crtc->plane; u32 reg, temp; - bool is_pch_port = false; - - if (intel_crtc->active) - return; - - intel_crtc->active = true; - intel_update_watermarks(dev); - - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - temp = I915_READ(PCH_LVDS); - if ((temp & LVDS_PORT_EN) == 0) - I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); - } - - is_pch_port = intel_crtc_driving_pch(crtc); - - if (is_pch_port) - ironlake_fdi_enable(crtc); - else { - /* disable CPU FDI tx and PCH FDI rx */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~FDI_TX_ENABLE); - POSTING_READ(reg); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~(0x7 << 16); - temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; - I915_WRITE(reg, temp & ~FDI_RX_ENABLE); - - POSTING_READ(reg); - udelay(100); - - /* Ironlake workaround, disable clock pointer after downing FDI */ - if (HAS_PCH_IBX(dev)) - I915_WRITE(FDI_RX_CHICKEN(pipe), - I915_READ(FDI_RX_CHICKEN(pipe) & - ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); - - /* still set train pattern 1 */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(reg, temp); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_PATTERN_1; - } - /* BPC in FDI rx is consistent with that in PIPECONF */ - temp &= ~(0x07 << 16); - temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; - I915_WRITE(reg, temp); - - POSTING_READ(reg); - udelay(100); - } - - /* Enable panel fitting for LVDS */ - if (dev_priv->pch_pf_size && - (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { - /* Force use of hard-coded filter coefficients - * as some pre-programmed values are broken, - * e.g. x201. - */ - I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, - PF_ENABLE | PF_FILTER_MED_3x3); - I915_WRITE(pipe ? PFB_WIN_POS : PFA_WIN_POS, - dev_priv->pch_pf_pos); - I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, - dev_priv->pch_pf_size); - } - - /* Enable CPU pipe */ - reg = PIPECONF(pipe); - temp = I915_READ(reg); - if ((temp & PIPECONF_ENABLE) == 0) { - I915_WRITE(reg, temp | PIPECONF_ENABLE); - POSTING_READ(reg); - intel_wait_for_vblank(dev, intel_crtc->pipe); - } - - /* configure and enable CPU plane */ - reg = DSPCNTR(plane); - temp = I915_READ(reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); - intel_flush_display_plane(dev, plane); - } - - /* Skip the PCH stuff if possible */ - if (!is_pch_port) - goto done; /* For PCH output, training FDI link */ if (IS_GEN6(dev)) @@ -2185,14 +2760,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) else ironlake_fdi_link_train(crtc); - /* enable PCH DPLL */ - reg = PCH_DPLL(pipe); - temp = I915_READ(reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(reg, temp | DPLL_VCO_ENABLE); - POSTING_READ(reg); - udelay(200); - } + intel_enable_pch_pll(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { /* Be sure PCH DPLL SEL is set */ @@ -2204,7 +2772,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_DPLL_SEL, temp); } - /* set transcoder timing */ + /* set transcoder timing, panel must allow it */ + assert_panel_unlocked(dev_priv, pipe); I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); @@ -2251,19 +2820,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp); } - /* enable PCH transcoder */ - reg = TRANSCONF(pipe); - temp = I915_READ(reg); - /* - * make the BPC in transcoder be consistent with - * that in pipeconf reg. - */ - temp &= ~PIPE_BPC_MASK; - temp |= I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK; - I915_WRITE(reg, temp | TRANS_ENABLE); - if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) - DRM_ERROR("failed to enable transcoder %d\n", pipe); -done: + intel_enable_transcoder(dev_priv, pipe); +} + +static void ironlake_crtc_enable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + u32 temp; + bool is_pch_port; + + if (intel_crtc->active) + return; + + intel_crtc->active = true; + intel_update_watermarks(dev); + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + temp = I915_READ(PCH_LVDS); + if ((temp & LVDS_PORT_EN) == 0) + I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); + } + + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else + ironlake_fdi_disable(crtc); + + /* Enable panel fitting for LVDS */ + if (dev_priv->pch_pf_size && + (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || HAS_eDP)) { + /* Force use of hard-coded filter coefficients + * as some pre-programmed values are broken, + * e.g. x201. + */ + I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); + I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); + I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); + } + + intel_enable_pipe(dev_priv, pipe, is_pch_port); + intel_enable_plane(dev_priv, plane, pipe); + + if (is_pch_port) + ironlake_pch_enable(crtc); + intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); @@ -2285,116 +2891,58 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) drm_vblank_off(dev, pipe); intel_crtc_update_cursor(crtc, false); - /* Disable display plane */ - reg = DSPCNTR(plane); - temp = I915_READ(reg); - if (temp & DISPLAY_PLANE_ENABLE) { - I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); - intel_flush_display_plane(dev, plane); - } + intel_disable_plane(dev_priv, plane, pipe); if (dev_priv->cfb_plane == plane && dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); - /* disable cpu pipe, disable after all planes disabled */ - reg = PIPECONF(pipe); - temp = I915_READ(reg); - if (temp & PIPECONF_ENABLE) { - I915_WRITE(reg, temp & ~PIPECONF_ENABLE); - POSTING_READ(reg); - /* wait for cpu pipe off, pipe state */ - intel_wait_for_pipe_off(dev, intel_crtc->pipe); - } + intel_disable_pipe(dev_priv, pipe); /* Disable PF */ - I915_WRITE(pipe ? PFB_CTL_1 : PFA_CTL_1, 0); - I915_WRITE(pipe ? PFB_WIN_SZ : PFA_WIN_SZ, 0); - - /* disable CPU FDI tx and PCH FDI rx */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~FDI_TX_ENABLE); - POSTING_READ(reg); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~(0x7 << 16); - temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; - I915_WRITE(reg, temp & ~FDI_RX_ENABLE); - - POSTING_READ(reg); - udelay(100); - - /* Ironlake workaround, disable clock pointer after downing FDI */ - if (HAS_PCH_IBX(dev)) - I915_WRITE(FDI_RX_CHICKEN(pipe), - I915_READ(FDI_RX_CHICKEN(pipe) & - ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); - - /* still set train pattern 1 */ - reg = FDI_TX_CTL(pipe); - temp = I915_READ(reg); - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_PATTERN_1; - I915_WRITE(reg, temp); - - reg = FDI_RX_CTL(pipe); - temp = I915_READ(reg); - if (HAS_PCH_CPT(dev)) { - temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; - temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; - } else { - temp &= ~FDI_LINK_TRAIN_NONE; - temp |= FDI_LINK_TRAIN_PATTERN_1; - } - /* BPC in FDI rx is consistent with that in PIPECONF */ - temp &= ~(0x07 << 16); - temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; - I915_WRITE(reg, temp); + I915_WRITE(PF_CTL(pipe), 0); + I915_WRITE(PF_WIN_SZ(pipe), 0); - POSTING_READ(reg); - udelay(100); + ironlake_fdi_disable(crtc); - if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - temp = I915_READ(PCH_LVDS); - if (temp & LVDS_PORT_EN) { - I915_WRITE(PCH_LVDS, temp & ~LVDS_PORT_EN); - POSTING_READ(PCH_LVDS); - udelay(100); - } - } + /* This is a horrible layering violation; we should be doing this in + * the connector/encoder ->prepare instead, but we don't always have + * enough information there about the config to know whether it will + * actually be necessary or just cause undesired flicker. + */ + intel_disable_pch_ports(dev_priv, pipe); - /* disable PCH transcoder */ - reg = TRANSCONF(plane); - temp = I915_READ(reg); - if (temp & TRANS_ENABLE) { - I915_WRITE(reg, temp & ~TRANS_ENABLE); - /* wait for PCH transcoder off, transcoder state */ - if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) - DRM_ERROR("failed to disable transcoder\n"); - } + intel_disable_transcoder(dev_priv, pipe); if (HAS_PCH_CPT(dev)) { /* disable TRANS_DP_CTL */ reg = TRANS_DP_CTL(pipe); temp = I915_READ(reg); temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); + temp |= TRANS_DP_PORT_SEL_NONE; I915_WRITE(reg, temp); /* disable DPLL_SEL */ temp = I915_READ(PCH_DPLL_SEL); - if (pipe == 0) - temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); - else + switch (pipe) { + case 0: + temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL); + break; + case 1: temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); + break; + case 2: + /* FIXME: manage transcoder PLLs? */ + temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); + break; + default: + BUG(); /* wtf */ + } I915_WRITE(PCH_DPLL_SEL, temp); } /* disable PCH DPLL */ - reg = PCH_DPLL(pipe); - temp = I915_READ(reg); - I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); + intel_disable_pch_pll(dev_priv, pipe); /* Switch from PCDclk to Rawclk */ reg = FDI_RX_CTL(pipe); @@ -2451,9 +2999,12 @@ static void intel_crtc_dpms_overlay(struct intel_crtc *intel_crtc, bool enable) { if (!enable && intel_crtc->overlay) { struct drm_device *dev = intel_crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; mutex_lock(&dev->struct_mutex); - (void) intel_overlay_switch_off(intel_crtc->overlay, false); + dev_priv->mm.interruptible = false; + (void) intel_overlay_switch_off(intel_crtc->overlay); + dev_priv->mm.interruptible = true; mutex_unlock(&dev->struct_mutex); } @@ -2469,7 +3020,6 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - u32 reg, temp; if (intel_crtc->active) return; @@ -2477,42 +3027,9 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) intel_crtc->active = true; intel_update_watermarks(dev); - /* Enable the DPLL */ - reg = DPLL(pipe); - temp = I915_READ(reg); - if ((temp & DPLL_VCO_ENABLE) == 0) { - I915_WRITE(reg, temp); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(reg); - udelay(150); - - I915_WRITE(reg, temp | DPLL_VCO_ENABLE); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(reg); - udelay(150); - - I915_WRITE(reg, temp | DPLL_VCO_ENABLE); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(reg); - udelay(150); - } - - /* Enable the pipe */ - reg = PIPECONF(pipe); - temp = I915_READ(reg); - if ((temp & PIPECONF_ENABLE) == 0) - I915_WRITE(reg, temp | PIPECONF_ENABLE); - - /* Enable the plane */ - reg = DSPCNTR(plane); - temp = I915_READ(reg); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - I915_WRITE(reg, temp | DISPLAY_PLANE_ENABLE); - intel_flush_display_plane(dev, plane); - } + intel_enable_pll(dev_priv, pipe); + intel_enable_pipe(dev_priv, pipe, false); + intel_enable_plane(dev_priv, plane, pipe); intel_crtc_load_lut(crtc); intel_update_fbc(dev); @@ -2529,7 +3046,6 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - u32 reg, temp; if (!intel_crtc->active) return; @@ -2544,45 +3060,10 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) dev_priv->display.disable_fbc) dev_priv->display.disable_fbc(dev); - /* Disable display plane */ - reg = DSPCNTR(plane); - temp = I915_READ(reg); - if (temp & DISPLAY_PLANE_ENABLE) { - I915_WRITE(reg, temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - intel_flush_display_plane(dev, plane); - - /* Wait for vblank for the disable to take effect */ - if (IS_GEN2(dev)) - intel_wait_for_vblank(dev, pipe); - } - - /* Don't disable pipe A or pipe A PLLs if needed */ - if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) - goto done; - - /* Next, disable display pipes */ - reg = PIPECONF(pipe); - temp = I915_READ(reg); - if (temp & PIPECONF_ENABLE) { - I915_WRITE(reg, temp & ~PIPECONF_ENABLE); - - /* Wait for the pipe to turn off */ - POSTING_READ(reg); - intel_wait_for_pipe_off(dev, pipe); - } - - reg = DPLL(pipe); - temp = I915_READ(reg); - if (temp & DPLL_VCO_ENABLE) { - I915_WRITE(reg, temp & ~DPLL_VCO_ENABLE); - - /* Wait for the clocks to turn off. */ - POSTING_READ(reg); - udelay(150); - } + intel_disable_plane(dev_priv, plane, pipe); + intel_disable_pipe(dev_priv, pipe); + intel_disable_pll(dev_priv, pipe); -done: intel_crtc->active = false; intel_update_fbc(dev); intel_update_watermarks(dev); @@ -2644,7 +3125,7 @@ static void intel_crtc_dpms(struct drm_crtc *crtc, int mode) master_priv->sarea_priv->pipeB_h = enabled ? crtc->mode.vdisplay : 0; break; default: - DRM_ERROR("Can't update pipe %d in SAREA\n", pipe); + DRM_ERROR("Can't update pipe %c in SAREA\n", pipe_name(pipe)); break; } } @@ -2841,77 +3322,77 @@ struct intel_watermark_params { }; /* Pineview has different values for various configs */ -static struct intel_watermark_params pineview_display_wm = { +static const struct intel_watermark_params pineview_display_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; -static struct intel_watermark_params pineview_display_hplloff_wm = { +static const struct intel_watermark_params pineview_display_hplloff_wm = { PINEVIEW_DISPLAY_FIFO, PINEVIEW_MAX_WM, PINEVIEW_DFT_HPLLOFF_WM, PINEVIEW_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; -static struct intel_watermark_params pineview_cursor_wm = { +static const struct intel_watermark_params pineview_cursor_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE, }; -static struct intel_watermark_params pineview_cursor_hplloff_wm = { +static const struct intel_watermark_params pineview_cursor_hplloff_wm = { PINEVIEW_CURSOR_FIFO, PINEVIEW_CURSOR_MAX_WM, PINEVIEW_CURSOR_DFT_WM, PINEVIEW_CURSOR_GUARD_WM, PINEVIEW_FIFO_LINE_SIZE }; -static struct intel_watermark_params g4x_wm_info = { +static const struct intel_watermark_params g4x_wm_info = { G4X_FIFO_SIZE, G4X_MAX_WM, G4X_MAX_WM, 2, G4X_FIFO_LINE_SIZE, }; -static struct intel_watermark_params g4x_cursor_wm_info = { +static const struct intel_watermark_params g4x_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, I965_CURSOR_DFT_WM, 2, G4X_FIFO_LINE_SIZE, }; -static struct intel_watermark_params i965_cursor_wm_info = { +static const struct intel_watermark_params i965_cursor_wm_info = { I965_CURSOR_FIFO, I965_CURSOR_MAX_WM, I965_CURSOR_DFT_WM, 2, I915_FIFO_LINE_SIZE, }; -static struct intel_watermark_params i945_wm_info = { +static const struct intel_watermark_params i945_wm_info = { I945_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; -static struct intel_watermark_params i915_wm_info = { +static const struct intel_watermark_params i915_wm_info = { I915_FIFO_SIZE, I915_MAX_WM, 1, 2, I915_FIFO_LINE_SIZE }; -static struct intel_watermark_params i855_wm_info = { +static const struct intel_watermark_params i855_wm_info = { I855GM_FIFO_SIZE, I915_MAX_WM, 1, 2, I830_FIFO_LINE_SIZE }; -static struct intel_watermark_params i830_wm_info = { +static const struct intel_watermark_params i830_wm_info = { I830_FIFO_SIZE, I915_MAX_WM, 1, @@ -2919,31 +3400,28 @@ static struct intel_watermark_params i830_wm_info = { I830_FIFO_LINE_SIZE }; -static struct intel_watermark_params ironlake_display_wm_info = { +static const struct intel_watermark_params ironlake_display_wm_info = { ILK_DISPLAY_FIFO, ILK_DISPLAY_MAXWM, ILK_DISPLAY_DFTWM, 2, ILK_FIFO_LINE_SIZE }; - -static struct intel_watermark_params ironlake_cursor_wm_info = { +static const struct intel_watermark_params ironlake_cursor_wm_info = { ILK_CURSOR_FIFO, ILK_CURSOR_MAXWM, ILK_CURSOR_DFTWM, 2, ILK_FIFO_LINE_SIZE }; - -static struct intel_watermark_params ironlake_display_srwm_info = { +static const struct intel_watermark_params ironlake_display_srwm_info = { ILK_DISPLAY_SR_FIFO, ILK_DISPLAY_MAX_SRWM, ILK_DISPLAY_DFT_SRWM, 2, ILK_FIFO_LINE_SIZE }; - -static struct intel_watermark_params ironlake_cursor_srwm_info = { +static const struct intel_watermark_params ironlake_cursor_srwm_info = { ILK_CURSOR_SR_FIFO, ILK_CURSOR_MAX_SRWM, ILK_CURSOR_DFT_SRWM, @@ -2951,31 +3429,28 @@ static struct intel_watermark_params ironlake_cursor_srwm_info = { ILK_FIFO_LINE_SIZE }; -static struct intel_watermark_params sandybridge_display_wm_info = { +static const struct intel_watermark_params sandybridge_display_wm_info = { SNB_DISPLAY_FIFO, SNB_DISPLAY_MAXWM, SNB_DISPLAY_DFTWM, 2, SNB_FIFO_LINE_SIZE }; - -static struct intel_watermark_params sandybridge_cursor_wm_info = { +static const struct intel_watermark_params sandybridge_cursor_wm_info = { SNB_CURSOR_FIFO, SNB_CURSOR_MAXWM, SNB_CURSOR_DFTWM, 2, SNB_FIFO_LINE_SIZE }; - -static struct intel_watermark_params sandybridge_display_srwm_info = { +static const struct intel_watermark_params sandybridge_display_srwm_info = { SNB_DISPLAY_SR_FIFO, SNB_DISPLAY_MAX_SRWM, SNB_DISPLAY_DFT_SRWM, 2, SNB_FIFO_LINE_SIZE }; - -static struct intel_watermark_params sandybridge_cursor_srwm_info = { +static const struct intel_watermark_params sandybridge_cursor_srwm_info = { SNB_CURSOR_SR_FIFO, SNB_CURSOR_MAX_SRWM, SNB_CURSOR_DFT_SRWM, @@ -3003,7 +3478,8 @@ static struct intel_watermark_params sandybridge_cursor_srwm_info = { * will occur, and a display engine hang could result. */ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, - struct intel_watermark_params *wm, + const struct intel_watermark_params *wm, + int fifo_size, int pixel_size, unsigned long latency_ns) { @@ -3021,7 +3497,7 @@ static unsigned long intel_calculate_wm(unsigned long clock_in_khz, DRM_DEBUG_KMS("FIFO entries required for mode: %d\n", entries_required); - wm_size = wm->fifo_size - (entries_required + wm->guard_size); + wm_size = fifo_size - (entries_required + wm->guard_size); DRM_DEBUG_KMS("FIFO watermark level: %d\n", wm_size); @@ -3194,15 +3670,28 @@ static int i830_get_fifo_size(struct drm_device *dev, int plane) return size; } -static void pineview_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int unused, - int pixel_size) +static struct drm_crtc *single_enabled_crtc(struct drm_device *dev) +{ + struct drm_crtc *crtc, *enabled = NULL; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { + if (crtc->enabled && crtc->fb) { + if (enabled) + return NULL; + enabled = crtc; + } + } + + return enabled; +} + +static void pineview_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + struct drm_crtc *crtc; const struct cxsr_latency *latency; u32 reg; unsigned long wm; - int sr_clock; latency = intel_get_cxsr_latency(IS_PINEVIEW_G(dev), dev_priv->is_ddr3, dev_priv->fsb_freq, dev_priv->mem_freq); @@ -3212,11 +3701,14 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, return; } - if (!planea_clock || !planeb_clock) { - sr_clock = planea_clock ? planea_clock : planeb_clock; + crtc = single_enabled_crtc(dev); + if (crtc) { + int clock = crtc->mode.clock; + int pixel_size = crtc->fb->bits_per_pixel / 8; /* Display SR */ - wm = intel_calculate_wm(sr_clock, &pineview_display_wm, + wm = intel_calculate_wm(clock, &pineview_display_wm, + pineview_display_wm.fifo_size, pixel_size, latency->display_sr); reg = I915_READ(DSPFW1); reg &= ~DSPFW_SR_MASK; @@ -3225,7 +3717,8 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, DRM_DEBUG_KMS("DSPFW1 register is %x\n", reg); /* cursor SR */ - wm = intel_calculate_wm(sr_clock, &pineview_cursor_wm, + wm = intel_calculate_wm(clock, &pineview_cursor_wm, + pineview_display_wm.fifo_size, pixel_size, latency->cursor_sr); reg = I915_READ(DSPFW3); reg &= ~DSPFW_CURSOR_SR_MASK; @@ -3233,7 +3726,8 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, I915_WRITE(DSPFW3, reg); /* Display HPLL off SR */ - wm = intel_calculate_wm(sr_clock, &pineview_display_hplloff_wm, + wm = intel_calculate_wm(clock, &pineview_display_hplloff_wm, + pineview_display_hplloff_wm.fifo_size, pixel_size, latency->display_hpll_disable); reg = I915_READ(DSPFW3); reg &= ~DSPFW_HPLL_SR_MASK; @@ -3241,7 +3735,8 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, I915_WRITE(DSPFW3, reg); /* cursor HPLL off SR */ - wm = intel_calculate_wm(sr_clock, &pineview_cursor_hplloff_wm, + wm = intel_calculate_wm(clock, &pineview_cursor_hplloff_wm, + pineview_display_hplloff_wm.fifo_size, pixel_size, latency->cursor_hpll_disable); reg = I915_READ(DSPFW3); reg &= ~DSPFW_HPLL_CURSOR_MASK; @@ -3259,125 +3754,229 @@ static void pineview_update_wm(struct drm_device *dev, int planea_clock, } } -static void g4x_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int sr_htotal, - int pixel_size) +static bool g4x_compute_wm0(struct drm_device *dev, + int plane, + const struct intel_watermark_params *display, + int display_latency_ns, + const struct intel_watermark_params *cursor, + int cursor_latency_ns, + int *plane_wm, + int *cursor_wm) { - struct drm_i915_private *dev_priv = dev->dev_private; - int total_size, cacheline_size; - int planea_wm, planeb_wm, cursora_wm, cursorb_wm, cursor_sr; - struct intel_watermark_params planea_params, planeb_params; - unsigned long line_time_us; - int sr_clock, sr_entries = 0, entries_required; + struct drm_crtc *crtc; + int htotal, hdisplay, clock, pixel_size; + int line_time_us, line_count; + int entries, tlb_miss; - /* Create copies of the base settings for each pipe */ - planea_params = planeb_params = g4x_wm_info; + crtc = intel_get_crtc_for_plane(dev, plane); + if (crtc->fb == NULL || !crtc->enabled) + return false; - /* Grab a couple of global values before we overwrite them */ - total_size = planea_params.fifo_size; - cacheline_size = planea_params.cacheline_size; + htotal = crtc->mode.htotal; + hdisplay = crtc->mode.hdisplay; + clock = crtc->mode.clock; + pixel_size = crtc->fb->bits_per_pixel / 8; - /* - * Note: we need to make sure we don't overflow for various clock & - * latency values. - * clocks go from a few thousand to several hundred thousand. - * latency is usually a few thousand - */ - entries_required = ((planea_clock / 1000) * pixel_size * latency_ns) / - 1000; - entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE); - planea_wm = entries_required + planea_params.guard_size; + /* Use the small buffer method to calculate plane watermark */ + entries = ((clock * pixel_size / 1000) * display_latency_ns) / 1000; + tlb_miss = display->fifo_size*display->cacheline_size - hdisplay * 8; + if (tlb_miss > 0) + entries += tlb_miss; + entries = DIV_ROUND_UP(entries, display->cacheline_size); + *plane_wm = entries + display->guard_size; + if (*plane_wm > (int)display->max_wm) + *plane_wm = display->max_wm; - entries_required = ((planeb_clock / 1000) * pixel_size * latency_ns) / - 1000; - entries_required = DIV_ROUND_UP(entries_required, G4X_FIFO_LINE_SIZE); - planeb_wm = entries_required + planeb_params.guard_size; + /* Use the large buffer method to calculate cursor watermark */ + line_time_us = ((htotal * 1000) / clock); + line_count = (cursor_latency_ns / line_time_us + 1000) / 1000; + entries = line_count * 64 * pixel_size; + tlb_miss = cursor->fifo_size*cursor->cacheline_size - hdisplay * 8; + if (tlb_miss > 0) + entries += tlb_miss; + entries = DIV_ROUND_UP(entries, cursor->cacheline_size); + *cursor_wm = entries + cursor->guard_size; + if (*cursor_wm > (int)cursor->max_wm) + *cursor_wm = (int)cursor->max_wm; - cursora_wm = cursorb_wm = 16; - cursor_sr = 32; + return true; +} - DRM_DEBUG("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); +/* + * Check the wm result. + * + * If any calculated watermark values is larger than the maximum value that + * can be programmed into the associated watermark register, that watermark + * must be disabled. + */ +static bool g4x_check_srwm(struct drm_device *dev, + int display_wm, int cursor_wm, + const struct intel_watermark_params *display, + const struct intel_watermark_params *cursor) +{ + DRM_DEBUG_KMS("SR watermark: display plane %d, cursor %d\n", + display_wm, cursor_wm); - /* Calc sr entries for one plane configs */ - if (sr_hdisplay && (!planea_clock || !planeb_clock)) { - /* self-refresh has much higher latency */ - static const int sr_latency_ns = 12000; + if (display_wm > display->max_wm) { + DRM_DEBUG_KMS("display watermark is too large(%d), disabling\n", + display_wm, display->max_wm); + return false; + } - sr_clock = planea_clock ? planea_clock : planeb_clock; - line_time_us = ((sr_htotal * 1000) / sr_clock); + if (cursor_wm > cursor->max_wm) { + DRM_DEBUG_KMS("cursor watermark is too large(%d), disabling\n", + cursor_wm, cursor->max_wm); + return false; + } - /* Use ns/us then divide to preserve precision */ - sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; - sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); - - entries_required = (((sr_latency_ns / line_time_us) + - 1000) / 1000) * pixel_size * 64; - entries_required = DIV_ROUND_UP(entries_required, - g4x_cursor_wm_info.cacheline_size); - cursor_sr = entries_required + g4x_cursor_wm_info.guard_size; - - if (cursor_sr > g4x_cursor_wm_info.max_wm) - cursor_sr = g4x_cursor_wm_info.max_wm; - DRM_DEBUG_KMS("self-refresh watermark: display plane %d " - "cursor %d\n", sr_entries, cursor_sr); + if (!(display_wm || cursor_wm)) { + DRM_DEBUG_KMS("SR latency is 0, disabling\n"); + return false; + } - I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); - } else { - /* Turn off self refresh if both pipes are enabled */ - I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) - & ~FW_BLC_SELF_EN); + return true; +} + +static bool g4x_compute_srwm(struct drm_device *dev, + int plane, + int latency_ns, + const struct intel_watermark_params *display, + const struct intel_watermark_params *cursor, + int *display_wm, int *cursor_wm) +{ + struct drm_crtc *crtc; + int hdisplay, htotal, pixel_size, clock; + unsigned long line_time_us; + int line_count, line_size; + int small, large; + int entries; + + if (!latency_ns) { + *display_wm = *cursor_wm = 0; + return false; } - DRM_DEBUG("Setting FIFO watermarks - A: %d, B: %d, SR %d\n", - planea_wm, planeb_wm, sr_entries); + crtc = intel_get_crtc_for_plane(dev, plane); + hdisplay = crtc->mode.hdisplay; + htotal = crtc->mode.htotal; + clock = crtc->mode.clock; + pixel_size = crtc->fb->bits_per_pixel / 8; - planea_wm &= 0x3f; - planeb_wm &= 0x3f; + line_time_us = (htotal * 1000) / clock; + line_count = (latency_ns / line_time_us + 1000) / 1000; + line_size = hdisplay * pixel_size; - I915_WRITE(DSPFW1, (sr_entries << DSPFW_SR_SHIFT) | + /* Use the minimum of the small and large buffer method for primary */ + small = ((clock * pixel_size / 1000) * latency_ns) / 1000; + large = line_count * line_size; + + entries = DIV_ROUND_UP(min(small, large), display->cacheline_size); + *display_wm = entries + display->guard_size; + + /* calculate the self-refresh watermark for display cursor */ + entries = line_count * pixel_size * 64; + entries = DIV_ROUND_UP(entries, cursor->cacheline_size); + *cursor_wm = entries + cursor->guard_size; + + return g4x_check_srwm(dev, + *display_wm, *cursor_wm, + display, cursor); +} + +static inline bool single_plane_enabled(unsigned int mask) +{ + return mask && (mask & -mask) == 0; +} + +static void g4x_update_wm(struct drm_device *dev) +{ + static const int sr_latency_ns = 12000; + struct drm_i915_private *dev_priv = dev->dev_private; + int planea_wm, planeb_wm, cursora_wm, cursorb_wm; + int plane_sr, cursor_sr; + unsigned int enabled = 0; + + if (g4x_compute_wm0(dev, 0, + &g4x_wm_info, latency_ns, + &g4x_cursor_wm_info, latency_ns, + &planea_wm, &cursora_wm)) + enabled |= 1; + + if (g4x_compute_wm0(dev, 1, + &g4x_wm_info, latency_ns, + &g4x_cursor_wm_info, latency_ns, + &planeb_wm, &cursorb_wm)) + enabled |= 2; + + plane_sr = cursor_sr = 0; + if (single_plane_enabled(enabled) && + g4x_compute_srwm(dev, ffs(enabled) - 1, + sr_latency_ns, + &g4x_wm_info, + &g4x_cursor_wm_info, + &plane_sr, &cursor_sr)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN); + else + I915_WRITE(FW_BLC_SELF, + I915_READ(FW_BLC_SELF) & ~FW_BLC_SELF_EN); + + DRM_DEBUG_KMS("Setting FIFO watermarks - A: plane=%d, cursor=%d, B: plane=%d, cursor=%d, SR: plane=%d, cursor=%d\n", + planea_wm, cursora_wm, + planeb_wm, cursorb_wm, + plane_sr, cursor_sr); + + I915_WRITE(DSPFW1, + (plane_sr << DSPFW_SR_SHIFT) | (cursorb_wm << DSPFW_CURSORB_SHIFT) | - (planeb_wm << DSPFW_PLANEB_SHIFT) | planea_wm); - I915_WRITE(DSPFW2, (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | + (planeb_wm << DSPFW_PLANEB_SHIFT) | + planea_wm); + I915_WRITE(DSPFW2, + (I915_READ(DSPFW2) & DSPFW_CURSORA_MASK) | (cursora_wm << DSPFW_CURSORA_SHIFT)); /* HPLL off in SR has some issues on G4x... disable it */ - I915_WRITE(DSPFW3, (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | + I915_WRITE(DSPFW3, + (I915_READ(DSPFW3) & ~DSPFW_HPLL_SR_EN) | (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } -static void i965_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int sr_htotal, - int pixel_size) +static void i965_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - unsigned long line_time_us; - int sr_clock, sr_entries, srwm = 1; + struct drm_crtc *crtc; + int srwm = 1; int cursor_sr = 16; /* Calc sr entries for one plane configs */ - if (sr_hdisplay && (!planea_clock || !planeb_clock)) { + crtc = single_enabled_crtc(dev); + if (crtc) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 12000; + int clock = crtc->mode.clock; + int htotal = crtc->mode.htotal; + int hdisplay = crtc->mode.hdisplay; + int pixel_size = crtc->fb->bits_per_pixel / 8; + unsigned long line_time_us; + int entries; - sr_clock = planea_clock ? planea_clock : planeb_clock; - line_time_us = ((sr_htotal * 1000) / sr_clock); + line_time_us = ((htotal * 1000) / clock); /* Use ns/us then divide to preserve precision */ - sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; - sr_entries = DIV_ROUND_UP(sr_entries, I915_FIFO_LINE_SIZE); - DRM_DEBUG("self-refresh entries: %d\n", sr_entries); - srwm = I965_FIFO_SIZE - sr_entries; + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + pixel_size * hdisplay; + entries = DIV_ROUND_UP(entries, I915_FIFO_LINE_SIZE); + srwm = I965_FIFO_SIZE - entries; if (srwm < 0) srwm = 1; srwm &= 0x1ff; + DRM_DEBUG_KMS("self-refresh entries: %d, wm: %d\n", + entries, srwm); - sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * pixel_size * 64; - sr_entries = DIV_ROUND_UP(sr_entries, + entries = DIV_ROUND_UP(entries, i965_cursor_wm_info.cacheline_size); cursor_sr = i965_cursor_wm_info.fifo_size - - (sr_entries + i965_cursor_wm_info.guard_size); + (entries + i965_cursor_wm_info.guard_size); if (cursor_sr > i965_cursor_wm_info.max_wm) cursor_sr = i965_cursor_wm_info.max_wm; @@ -3398,46 +3997,56 @@ static void i965_update_wm(struct drm_device *dev, int planea_clock, srwm); /* 965 has limitations... */ - I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | (8 << 16) | (8 << 8) | - (8 << 0)); + I915_WRITE(DSPFW1, (srwm << DSPFW_SR_SHIFT) | + (8 << 16) | (8 << 8) | (8 << 0)); I915_WRITE(DSPFW2, (8 << 8) | (8 << 0)); /* update cursor SR watermark */ I915_WRITE(DSPFW3, (cursor_sr << DSPFW_CURSOR_SR_SHIFT)); } -static void i9xx_update_wm(struct drm_device *dev, int planea_clock, - int planeb_clock, int sr_hdisplay, int sr_htotal, - int pixel_size) +static void i9xx_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + const struct intel_watermark_params *wm_info; uint32_t fwater_lo; uint32_t fwater_hi; - int total_size, cacheline_size, cwm, srwm = 1; + int cwm, srwm = 1; + int fifo_size; int planea_wm, planeb_wm; - struct intel_watermark_params planea_params, planeb_params; - unsigned long line_time_us; - int sr_clock, sr_entries = 0; + struct drm_crtc *crtc, *enabled = NULL; - /* Create copies of the base settings for each pipe */ - if (IS_CRESTLINE(dev) || IS_I945GM(dev)) - planea_params = planeb_params = i945_wm_info; + if (IS_I945GM(dev)) + wm_info = &i945_wm_info; else if (!IS_GEN2(dev)) - planea_params = planeb_params = i915_wm_info; + wm_info = &i915_wm_info; else - planea_params = planeb_params = i855_wm_info; - - /* Grab a couple of global values before we overwrite them */ - total_size = planea_params.fifo_size; - cacheline_size = planea_params.cacheline_size; - - /* Update per-plane FIFO sizes */ - planea_params.fifo_size = dev_priv->display.get_fifo_size(dev, 0); - planeb_params.fifo_size = dev_priv->display.get_fifo_size(dev, 1); + wm_info = &i855_wm_info; + + fifo_size = dev_priv->display.get_fifo_size(dev, 0); + crtc = intel_get_crtc_for_plane(dev, 0); + if (crtc->enabled && crtc->fb) { + planea_wm = intel_calculate_wm(crtc->mode.clock, + wm_info, fifo_size, + crtc->fb->bits_per_pixel / 8, + latency_ns); + enabled = crtc; + } else + planea_wm = fifo_size - wm_info->guard_size; + + fifo_size = dev_priv->display.get_fifo_size(dev, 1); + crtc = intel_get_crtc_for_plane(dev, 1); + if (crtc->enabled && crtc->fb) { + planeb_wm = intel_calculate_wm(crtc->mode.clock, + wm_info, fifo_size, + crtc->fb->bits_per_pixel / 8, + latency_ns); + if (enabled == NULL) + enabled = crtc; + else + enabled = NULL; + } else + planeb_wm = fifo_size - wm_info->guard_size; - planea_wm = intel_calculate_wm(planea_clock, &planea_params, - pixel_size, latency_ns); - planeb_wm = intel_calculate_wm(planeb_clock, &planeb_params, - pixel_size, latency_ns); DRM_DEBUG_KMS("FIFO watermarks - A: %d, B: %d\n", planea_wm, planeb_wm); /* @@ -3445,39 +4054,39 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, */ cwm = 2; + /* Play safe and disable self-refresh before adjusting watermarks. */ + if (IS_I945G(dev) || IS_I945GM(dev)) + I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | 0); + else if (IS_I915GM(dev)) + I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN); + /* Calc sr entries for one plane configs */ - if (HAS_FW_BLC(dev) && sr_hdisplay && - (!planea_clock || !planeb_clock)) { + if (HAS_FW_BLC(dev) && enabled) { /* self-refresh has much higher latency */ static const int sr_latency_ns = 6000; + int clock = enabled->mode.clock; + int htotal = enabled->mode.htotal; + int hdisplay = enabled->mode.hdisplay; + int pixel_size = enabled->fb->bits_per_pixel / 8; + unsigned long line_time_us; + int entries; - sr_clock = planea_clock ? planea_clock : planeb_clock; - line_time_us = ((sr_htotal * 1000) / sr_clock); + line_time_us = (htotal * 1000) / clock; /* Use ns/us then divide to preserve precision */ - sr_entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * - pixel_size * sr_hdisplay; - sr_entries = DIV_ROUND_UP(sr_entries, cacheline_size); - DRM_DEBUG_KMS("self-refresh entries: %d\n", sr_entries); - srwm = total_size - sr_entries; + entries = (((sr_latency_ns / line_time_us) + 1000) / 1000) * + pixel_size * hdisplay; + entries = DIV_ROUND_UP(entries, wm_info->cacheline_size); + DRM_DEBUG_KMS("self-refresh entries: %d\n", entries); + srwm = wm_info->fifo_size - entries; if (srwm < 0) srwm = 1; if (IS_I945G(dev) || IS_I945GM(dev)) - I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); - else if (IS_I915GM(dev)) { - /* 915M has a smaller SRWM field */ + I915_WRITE(FW_BLC_SELF, + FW_BLC_SELF_FIFO_MASK | (srwm & 0xff)); + else if (IS_I915GM(dev)) I915_WRITE(FW_BLC_SELF, srwm & 0x3f); - I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN); - } - } else { - /* Turn off self refresh if both pipes are enabled */ - if (IS_I945G(dev) || IS_I945GM(dev)) { - I915_WRITE(FW_BLC_SELF, I915_READ(FW_BLC_SELF) - & ~FW_BLC_SELF_EN); - } else if (IS_I915GM(dev)) { - I915_WRITE(INSTPM, I915_READ(INSTPM) & ~INSTPM_SELF_EN); - } } DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d, B: %d, C: %d, SR %d\n", @@ -3492,19 +4101,36 @@ static void i9xx_update_wm(struct drm_device *dev, int planea_clock, I915_WRITE(FW_BLC, fwater_lo); I915_WRITE(FW_BLC2, fwater_hi); + + if (HAS_FW_BLC(dev)) { + if (enabled) { + if (IS_I945G(dev) || IS_I945GM(dev)) + I915_WRITE(FW_BLC_SELF, + FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN); + else if (IS_I915GM(dev)) + I915_WRITE(INSTPM, I915_READ(INSTPM) | INSTPM_SELF_EN); + DRM_DEBUG_KMS("memory self refresh enabled\n"); + } else + DRM_DEBUG_KMS("memory self refresh disabled\n"); + } } -static void i830_update_wm(struct drm_device *dev, int planea_clock, int unused, - int unused2, int unused3, int pixel_size) +static void i830_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - uint32_t fwater_lo = I915_READ(FW_BLC) & ~0xfff; + struct drm_crtc *crtc; + uint32_t fwater_lo; int planea_wm; - i830_wm_info.fifo_size = dev_priv->display.get_fifo_size(dev, 0); + crtc = single_enabled_crtc(dev); + if (crtc == NULL) + return; - planea_wm = intel_calculate_wm(planea_clock, &i830_wm_info, - pixel_size, latency_ns); + planea_wm = intel_calculate_wm(crtc->mode.clock, &i830_wm_info, + dev_priv->display.get_fifo_size(dev, 0), + crtc->fb->bits_per_pixel / 8, + latency_ns); + fwater_lo = I915_READ(FW_BLC) & ~0xfff; fwater_lo |= (3<<8) | planea_wm; DRM_DEBUG_KMS("Setting FIFO watermarks - A: %d\n", planea_wm); @@ -3613,15 +4239,15 @@ static bool ironlake_check_srwm(struct drm_device *dev, int level, /* * Compute watermark values of WM[1-3], */ -static bool ironlake_compute_srwm(struct drm_device *dev, int level, - int hdisplay, int htotal, - int pixel_size, int clock, int latency_ns, +static bool ironlake_compute_srwm(struct drm_device *dev, int level, int plane, + int latency_ns, const struct intel_watermark_params *display, const struct intel_watermark_params *cursor, int *fbc_wm, int *display_wm, int *cursor_wm) { - + struct drm_crtc *crtc; unsigned long line_time_us; + int hdisplay, htotal, pixel_size, clock; int line_count, line_size; int small, large; int entries; @@ -3631,6 +4257,12 @@ static bool ironlake_compute_srwm(struct drm_device *dev, int level, return false; } + crtc = intel_get_crtc_for_plane(dev, plane); + hdisplay = crtc->mode.hdisplay; + htotal = crtc->mode.htotal; + clock = crtc->mode.clock; + pixel_size = crtc->fb->bits_per_pixel / 8; + line_time_us = (htotal * 1000) / clock; line_count = (latency_ns / line_time_us + 1000) / 1000; line_size = hdisplay * pixel_size; @@ -3658,14 +4290,11 @@ static bool ironlake_compute_srwm(struct drm_device *dev, int level, display, cursor); } -static void ironlake_update_wm(struct drm_device *dev, - int planea_clock, int planeb_clock, - int hdisplay, int htotal, - int pixel_size) +static void ironlake_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - int fbc_wm, plane_wm, cursor_wm, enabled; - int clock; + int fbc_wm, plane_wm, cursor_wm; + unsigned int enabled; enabled = 0; if (ironlake_compute_wm0(dev, 0, @@ -3679,7 +4308,7 @@ static void ironlake_update_wm(struct drm_device *dev, DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled++; + enabled |= 1; } if (ironlake_compute_wm0(dev, 1, @@ -3693,7 +4322,7 @@ static void ironlake_update_wm(struct drm_device *dev, DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled++; + enabled |= 2; } /* @@ -3704,14 +4333,13 @@ static void ironlake_update_wm(struct drm_device *dev, I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); - if (enabled != 1) + if (!single_plane_enabled(enabled)) return; - - clock = planea_clock ? planea_clock : planeb_clock; + enabled = ffs(enabled) - 1; /* WM1 */ - if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size, - clock, ILK_READ_WM1_LATENCY() * 500, + if (!ironlake_compute_srwm(dev, 1, enabled, + ILK_READ_WM1_LATENCY() * 500, &ironlake_display_srwm_info, &ironlake_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) @@ -3725,8 +4353,8 @@ static void ironlake_update_wm(struct drm_device *dev, cursor_wm); /* WM2 */ - if (!ironlake_compute_srwm(dev, 2, hdisplay, htotal, pixel_size, - clock, ILK_READ_WM2_LATENCY() * 500, + if (!ironlake_compute_srwm(dev, 2, enabled, + ILK_READ_WM2_LATENCY() * 500, &ironlake_display_srwm_info, &ironlake_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) @@ -3745,15 +4373,12 @@ static void ironlake_update_wm(struct drm_device *dev, */ } -static void sandybridge_update_wm(struct drm_device *dev, - int planea_clock, int planeb_clock, - int hdisplay, int htotal, - int pixel_size) +static void sandybridge_update_wm(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */ - int fbc_wm, plane_wm, cursor_wm, enabled; - int clock; + int fbc_wm, plane_wm, cursor_wm; + unsigned int enabled; enabled = 0; if (ironlake_compute_wm0(dev, 0, @@ -3765,7 +4390,7 @@ static void sandybridge_update_wm(struct drm_device *dev, DRM_DEBUG_KMS("FIFO watermarks For pipe A -" " plane %d, " "cursor: %d\n", plane_wm, cursor_wm); - enabled++; + enabled |= 1; } if (ironlake_compute_wm0(dev, 1, @@ -3777,7 +4402,7 @@ static void sandybridge_update_wm(struct drm_device *dev, DRM_DEBUG_KMS("FIFO watermarks For pipe B -" " plane %d, cursor: %d\n", plane_wm, cursor_wm); - enabled++; + enabled |= 2; } /* @@ -3794,14 +4419,13 @@ static void sandybridge_update_wm(struct drm_device *dev, I915_WRITE(WM2_LP_ILK, 0); I915_WRITE(WM1_LP_ILK, 0); - if (enabled != 1) + if (!single_plane_enabled(enabled)) return; - - clock = planea_clock ? planea_clock : planeb_clock; + enabled = ffs(enabled) - 1; /* WM1 */ - if (!ironlake_compute_srwm(dev, 1, hdisplay, htotal, pixel_size, - clock, SNB_READ_WM1_LATENCY() * 500, + if (!ironlake_compute_srwm(dev, 1, enabled, + SNB_READ_WM1_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) @@ -3815,9 +4439,8 @@ static void sandybridge_update_wm(struct drm_device *dev, cursor_wm); /* WM2 */ - if (!ironlake_compute_srwm(dev, 2, - hdisplay, htotal, pixel_size, - clock, SNB_READ_WM2_LATENCY() * 500, + if (!ironlake_compute_srwm(dev, 2, enabled, + SNB_READ_WM2_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) @@ -3831,9 +4454,8 @@ static void sandybridge_update_wm(struct drm_device *dev, cursor_wm); /* WM3 */ - if (!ironlake_compute_srwm(dev, 3, - hdisplay, htotal, pixel_size, - clock, SNB_READ_WM3_LATENCY() * 500, + if (!ironlake_compute_srwm(dev, 3, enabled, + SNB_READ_WM3_LATENCY() * 500, &sandybridge_display_srwm_info, &sandybridge_cursor_srwm_info, &fbc_wm, &plane_wm, &cursor_wm)) @@ -3882,44 +4504,9 @@ static void sandybridge_update_wm(struct drm_device *dev, static void intel_update_watermarks(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - struct drm_crtc *crtc; - int sr_hdisplay = 0; - unsigned long planea_clock = 0, planeb_clock = 0, sr_clock = 0; - int enabled = 0, pixel_size = 0; - int sr_htotal = 0; - - if (!dev_priv->display.update_wm) - return; - /* Get the clock config from both planes */ - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->active) { - enabled++; - if (intel_crtc->plane == 0) { - DRM_DEBUG_KMS("plane A (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); - planea_clock = crtc->mode.clock; - } else { - DRM_DEBUG_KMS("plane B (pipe %d) clock: %d\n", - intel_crtc->pipe, crtc->mode.clock); - planeb_clock = crtc->mode.clock; - } - sr_hdisplay = crtc->mode.hdisplay; - sr_clock = crtc->mode.clock; - sr_htotal = crtc->mode.htotal; - if (crtc->fb) - pixel_size = crtc->fb->bits_per_pixel / 8; - else - pixel_size = 4; /* by default */ - } - } - - if (enabled <= 0) - return; - - dev_priv->display.update_wm(dev, planea_clock, planeb_clock, - sr_hdisplay, sr_htotal, pixel_size); + if (dev_priv->display.update_wm) + dev_priv->display.update_wm(dev); } static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) @@ -3951,6 +4538,7 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, int ret; struct fdi_m_n m_n = {0}; u32 reg, temp; + u32 lvds_sync = 0; int target_clock; drm_vblank_pre_modeset(dev, pipe); @@ -4322,9 +4910,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } - dspcntr |= DISPLAY_PLANE_ENABLE; - pipeconf |= PIPECONF_ENABLE; - dpll |= DPLL_VCO_ENABLE; + if (!HAS_PCH_SPLIT(dev)) + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); drm_mode_debug_printmodeline(mode); @@ -4350,10 +4937,20 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, /* enable transcoder DPLL */ if (HAS_PCH_CPT(dev)) { temp = I915_READ(PCH_DPLL_SEL); - if (pipe == 0) + switch (pipe) { + case 0: temp |= TRANSA_DPLL_ENABLE | TRANSA_DPLLA_SEL; - else + break; + case 1: temp |= TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL; + break; + case 2: + /* FIXME: manage transcoder PLLs? */ + temp |= TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL; + break; + default: + BUG(); + } I915_WRITE(PCH_DPLL_SEL, temp); POSTING_READ(PCH_DPLL_SEL); @@ -4403,6 +5000,22 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, else temp &= ~LVDS_ENABLE_DITHER; } + if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) + lvds_sync |= LVDS_HSYNC_POLARITY; + if (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) + lvds_sync |= LVDS_VSYNC_POLARITY; + if ((temp & (LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY)) + != lvds_sync) { + char flags[2] = "-+"; + DRM_INFO("Changing LVDS panel from " + "(%chsync, %cvsync) to (%chsync, %cvsync)\n", + flags[!(temp & LVDS_HSYNC_POLARITY)], + flags[!(temp & LVDS_VSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_HSYNC_POLARITY)], + flags[!(lvds_sync & LVDS_VSYNC_POLARITY)]); + temp &= ~(LVDS_HSYNC_POLARITY | LVDS_VSYNC_POLARITY); + temp |= lvds_sync; + } I915_WRITE(reg, temp); } @@ -4420,17 +5033,10 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, intel_dp_set_m_n(crtc, mode, adjusted_mode); } else if (HAS_PCH_SPLIT(dev)) { /* For non-DP output, clear any trans DP clock recovery setting.*/ - if (pipe == 0) { - I915_WRITE(TRANSA_DATA_M1, 0); - I915_WRITE(TRANSA_DATA_N1, 0); - I915_WRITE(TRANSA_DP_LINK_M1, 0); - I915_WRITE(TRANSA_DP_LINK_N1, 0); - } else { - I915_WRITE(TRANSB_DATA_M1, 0); - I915_WRITE(TRANSB_DATA_N1, 0); - I915_WRITE(TRANSB_DP_LINK_M1, 0); - I915_WRITE(TRANSB_DP_LINK_N1, 0); - } + I915_WRITE(TRANSDATA_M1(pipe), 0); + I915_WRITE(TRANSDATA_N1(pipe), 0); + I915_WRITE(TRANSDPLINK_M1(pipe), 0); + I915_WRITE(TRANSDPLINK_N1(pipe), 0); } if (!has_edp_encoder || intel_encoder_is_pch_edp(&has_edp_encoder->base)) { @@ -4533,6 +5139,8 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, I915_WRITE(PIPECONF(pipe), pipeconf); POSTING_READ(PIPECONF(pipe)); + if (!HAS_PCH_SPLIT(dev)) + intel_enable_pipe(dev_priv, pipe, false); intel_wait_for_vblank(dev, pipe); @@ -4543,6 +5151,9 @@ static int intel_crtc_mode_set(struct drm_crtc *crtc, } I915_WRITE(DSPCNTR(plane), dspcntr); + POSTING_READ(DSPCNTR(plane)); + if (!HAS_PCH_SPLIT(dev)) + intel_enable_plane(dev_priv, plane, pipe); ret = intel_pipe_set_base(crtc, x, y, old_fb); @@ -4559,7 +5170,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int palreg = (intel_crtc->pipe == 0) ? PALETTE_A : PALETTE_B; + int palreg = PALETTE(intel_crtc->pipe); int i; /* The clocks have to be on to load the palette. */ @@ -4568,8 +5179,7 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) /* use legacy palette for Ironlake */ if (HAS_PCH_SPLIT(dev)) - palreg = (intel_crtc->pipe == 0) ? LGC_PALETTE_A : - LGC_PALETTE_B; + palreg = LGC_PALETTE(intel_crtc->pipe); for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, @@ -4590,12 +5200,12 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base) if (intel_crtc->cursor_visible == visible) return; - cntl = I915_READ(CURACNTR); + cntl = I915_READ(_CURACNTR); if (visible) { /* On these chipsets we can only modify the base whilst * the cursor is disabled. */ - I915_WRITE(CURABASE, base); + I915_WRITE(_CURABASE, base); cntl &= ~(CURSOR_FORMAT_MASK); /* XXX width must be 64, stride 256 => 0x00 << 28 */ @@ -4604,7 +5214,7 @@ static void i845_update_cursor(struct drm_crtc *crtc, u32 base) CURSOR_FORMAT_ARGB; } else cntl &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE); - I915_WRITE(CURACNTR, cntl); + I915_WRITE(_CURACNTR, cntl); intel_crtc->cursor_visible = visible; } @@ -4618,7 +5228,7 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) bool visible = base != 0; if (intel_crtc->cursor_visible != visible) { - uint32_t cntl = I915_READ(pipe == 0 ? CURACNTR : CURBCNTR); + uint32_t cntl = I915_READ(CURCNTR(pipe)); if (base) { cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT); cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE; @@ -4627,12 +5237,12 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base) cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE); cntl |= CURSOR_MODE_DISABLE; } - I915_WRITE(pipe == 0 ? CURACNTR : CURBCNTR, cntl); + I915_WRITE(CURCNTR(pipe), cntl); intel_crtc->cursor_visible = visible; } /* and commit changes on next vblank */ - I915_WRITE(pipe == 0 ? CURABASE : CURBBASE, base); + I915_WRITE(CURBASE(pipe), base); } /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */ @@ -4682,7 +5292,7 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc, if (!visible && !intel_crtc->cursor_visible) return; - I915_WRITE(pipe == 0 ? CURAPOS : CURBPOS, pos); + I915_WRITE(CURPOS(pipe), pos); if (IS_845G(dev) || IS_I865G(dev)) i845_update_cursor(crtc, base); else @@ -4722,7 +5332,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, } obj = to_intel_bo(drm_gem_object_lookup(dev, file, handle)); - if (!obj) + if (&obj->base == NULL) return -ENOENT; if (obj->base.size < width * height * 4) { @@ -4988,14 +5598,14 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - u32 dpll = I915_READ((pipe == 0) ? DPLL_A : DPLL_B); + u32 dpll = I915_READ(DPLL(pipe)); u32 fp; intel_clock_t clock; if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0) - fp = I915_READ((pipe == 0) ? FPA0 : FPB0); + fp = FP0(pipe); else - fp = I915_READ((pipe == 0) ? FPA1 : FPB1); + fp = FP1(pipe); clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT; if (IS_PINEVIEW(dev)) { @@ -5077,10 +5687,10 @@ struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev, struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; struct drm_display_mode *mode; - int htot = I915_READ((pipe == 0) ? HTOTAL_A : HTOTAL_B); - int hsync = I915_READ((pipe == 0) ? HSYNC_A : HSYNC_B); - int vtot = I915_READ((pipe == 0) ? VTOTAL_A : VTOTAL_B); - int vsync = I915_READ((pipe == 0) ? VSYNC_A : VSYNC_B); + int htot = I915_READ(HTOTAL(pipe)); + int hsync = I915_READ(HSYNC(pipe)); + int vtot = I915_READ(VTOTAL(pipe)); + int vsync = I915_READ(VSYNC(pipe)); mode = kzalloc(sizeof(*mode), GFP_KERNEL); if (!mode) @@ -5189,7 +5799,7 @@ static void intel_decrease_pllclock(struct drm_crtc *crtc) drm_i915_private_t *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; - int dpll_reg = (pipe == 0) ? DPLL_A : DPLL_B; + int dpll_reg = DPLL(pipe); int dpll = I915_READ(dpll_reg); if (HAS_PCH_SPLIT(dev)) @@ -5237,7 +5847,6 @@ static void intel_idle_update(struct work_struct *work) struct drm_device *dev = dev_priv->dev; struct drm_crtc *crtc; struct intel_crtc *intel_crtc; - int enabled = 0; if (!i915_powersave) return; @@ -5251,16 +5860,11 @@ static void intel_idle_update(struct work_struct *work) if (!crtc->fb) continue; - enabled++; intel_crtc = to_intel_crtc(crtc); if (!intel_crtc->busy) intel_decrease_pllclock(crtc); } - if ((enabled == 1) && (IS_I945G(dev) || IS_I945GM(dev))) { - DRM_DEBUG_DRIVER("enable memory self refresh on 945\n"); - I915_WRITE(FW_BLC_SELF, FW_BLC_SELF_EN_MASK | FW_BLC_SELF_EN); - } mutex_unlock(&dev->struct_mutex); } @@ -5285,17 +5889,9 @@ void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj) if (!drm_core_check_feature(dev, DRIVER_MODESET)) return; - if (!dev_priv->busy) { - if (IS_I945G(dev) || IS_I945GM(dev)) { - u32 fw_blc_self; - - DRM_DEBUG_DRIVER("disable memory self refresh on 945\n"); - fw_blc_self = I915_READ(FW_BLC_SELF); - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK); - } + if (!dev_priv->busy) dev_priv->busy = true; - } else + else mod_timer(&dev_priv->idle_timer, jiffies + msecs_to_jiffies(GPU_IDLE_TIMEOUT)); @@ -5307,14 +5903,6 @@ void intel_mark_busy(struct drm_device *dev, struct drm_i915_gem_object *obj) intel_fb = to_intel_framebuffer(crtc->fb); if (intel_fb->obj == obj) { if (!intel_crtc->busy) { - if (IS_I945G(dev) || IS_I945GM(dev)) { - u32 fw_blc_self; - - DRM_DEBUG_DRIVER("disable memory self refresh on 945\n"); - fw_blc_self = I915_READ(FW_BLC_SELF); - fw_blc_self &= ~FW_BLC_SELF_EN; - I915_WRITE(FW_BLC_SELF, fw_blc_self | FW_BLC_SELF_EN_MASK); - } /* Non-busy -> busy, upclock */ intel_increase_pllclock(crtc); intel_crtc->busy = true; @@ -5592,7 +6180,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; */ pf = 0; - pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); break; @@ -5602,8 +6190,8 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, OUT_RING(fb->pitch | obj->tiling_mode); OUT_RING(obj->gtt_offset); - pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE; - pipesrc = I915_READ(pipe == 0 ? PIPEASRC : PIPEBSRC) & 0x0fff0fff; + pf = I915_READ(PF_CTL(pipe)) & PF_ENABLE; + pipesrc = I915_READ(PIPESRC(pipe)) & 0x0fff0fff; OUT_RING(pf | pipesrc); break; } @@ -5692,22 +6280,8 @@ static void intel_sanitize_modesetting(struct drm_device *dev, pipe = !pipe; /* Disable the plane and wait for it to stop reading from the pipe. */ - I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE); - intel_flush_display_plane(dev, plane); - - if (IS_GEN2(dev)) - intel_wait_for_vblank(dev, pipe); - - if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE)) - return; - - /* Switch off the pipe. */ - reg = PIPECONF(pipe); - val = I915_READ(reg); - if (val & PIPECONF_ENABLE) { - I915_WRITE(reg, val & ~PIPECONF_ENABLE); - intel_wait_for_pipe_off(dev, pipe); - } + intel_disable_plane(dev_priv, plane, pipe); + intel_disable_pipe(dev_priv, pipe); } static void intel_crtc_init(struct drm_device *dev, int pipe) @@ -5997,7 +6571,7 @@ intel_user_framebuffer_create(struct drm_device *dev, int ret; obj = to_intel_bo(drm_gem_object_lookup(dev, filp, mode_cmd->handle)); - if (!obj) + if (&obj->base == NULL) return ERR_PTR(-ENOENT); intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL); @@ -6319,18 +6893,18 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RP_INTERRUPT_LIMITS, 18 << 24 | 6 << 16); - I915_WRITE(GEN6_RP_UP_THRESHOLD, 90000); - I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 100000); + I915_WRITE(GEN6_RP_UP_THRESHOLD, 10000); + I915_WRITE(GEN6_RP_DOWN_THRESHOLD, 1000000); I915_WRITE(GEN6_RP_UP_EI, 100000); - I915_WRITE(GEN6_RP_DOWN_EI, 300000); + I915_WRITE(GEN6_RP_DOWN_EI, 5000000); I915_WRITE(GEN6_RP_IDLE_HYSTERSIS, 10); I915_WRITE(GEN6_RP_CONTROL, GEN6_RP_MEDIA_TURBO | GEN6_RP_USE_NORMAL_FREQ | GEN6_RP_MEDIA_IS_GFX | GEN6_RP_ENABLE | - GEN6_RP_UP_BUSY_MAX | - GEN6_RP_DOWN_BUSY_MIN); + GEN6_RP_UP_BUSY_AVG | + GEN6_RP_DOWN_IDLE_CONT); if (wait_for((I915_READ(GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) == 0, 500)) @@ -6386,6 +6960,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) void intel_enable_clock_gating(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + int pipe; /* * Disable clock gating reported to work incorrectly according to the @@ -6495,12 +7070,10 @@ void intel_enable_clock_gating(struct drm_device *dev) ILK_DPARB_CLK_GATE | ILK_DPFD_CLK_GATE); - I915_WRITE(DSPACNTR, - I915_READ(DSPACNTR) | - DISPPLANE_TRICKLE_FEED_DISABLE); - I915_WRITE(DSPBCNTR, - I915_READ(DSPBCNTR) | - DISPPLANE_TRICKLE_FEED_DISABLE); + for_each_pipe(pipe) + I915_WRITE(DSPCNTR(pipe), + I915_READ(DSPCNTR(pipe)) | + DISPPLANE_TRICKLE_FEED_DISABLE); } } else if (IS_G4X(dev)) { uint32_t dspclk_gate; @@ -6855,10 +7428,6 @@ void intel_modeset_init(struct drm_device *dev) } dev->mode_config.fb_base = dev->agp->base; - if (IS_MOBILE(dev) || !IS_GEN2(dev)) - dev_priv->num_pipe = 2; - else - dev_priv->num_pipe = 1; DRM_DEBUG_KMS("%d display pipe%s available.\n", dev_priv->num_pipe, dev_priv->num_pipe > 1 ? "s" : ""); |