diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 26b49d8d781..32024dadcce 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5925,6 +5925,142 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, return true; } +static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) +{ + struct drm_device *dev = dev_priv->dev; + struct intel_ddi_plls *plls = &dev_priv->ddi_plls; + struct intel_crtc *crtc; + unsigned long irqflags; + uint32_t val, pch_hpd_mask; + + pch_hpd_mask = SDE_PORTB_HOTPLUG_CPT | SDE_PORTC_HOTPLUG_CPT; + if (!(dev_priv->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)) + pch_hpd_mask |= SDE_PORTD_HOTPLUG_CPT | SDE_CRT_HOTPLUG_CPT; + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) + WARN(crtc->base.enabled, "CRTC for pipe %c enabled\n", + pipe_name(crtc->pipe)); + + WARN(I915_READ(HSW_PWR_WELL_DRIVER), "Power well on\n"); + WARN(plls->spll_refcount, "SPLL enabled\n"); + WARN(plls->wrpll1_refcount, "WRPLL1 enabled\n"); + WARN(plls->wrpll2_refcount, "WRPLL2 enabled\n"); + WARN(I915_READ(PCH_PP_STATUS) & PP_ON, "Panel power on\n"); + WARN(I915_READ(BLC_PWM_CPU_CTL2) & BLM_PWM_ENABLE, + "CPU PWM1 enabled\n"); + WARN(I915_READ(HSW_BLC_PWM2_CTL) & BLM_PWM_ENABLE, + "CPU PWM2 enabled\n"); + WARN(I915_READ(BLC_PWM_PCH_CTL1) & BLM_PCH_PWM_ENABLE, + "PCH PWM1 enabled\n"); + WARN(I915_READ(UTIL_PIN_CTL) & UTIL_PIN_ENABLE, + "Utility pin enabled\n"); + WARN(I915_READ(PCH_GTC_CTL) & PCH_GTC_ENABLE, "PCH GTC enabled\n"); + + spin_lock_irqsave(&dev_priv->irq_lock, irqflags); + val = I915_READ(DEIMR); + WARN((val & ~DE_PCH_EVENT_IVB) != val, + "Unexpected DEIMR bits enabled: 0x%x\n", val); + val = I915_READ(SDEIMR); + WARN((val & ~pch_hpd_mask) != val, + "Unexpected SDEIMR bits enabled: 0x%x\n", val); + spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags); +} + +/* + * This function implements pieces of two sequences from BSpec: + * - Sequence for display software to disable LCPLL + * - Sequence for display software to allow package C8+ + * The steps implemented here are just the steps that actually touch the LCPLL + * register. Callers should take care of disabling all the display engine + * functions, doing the mode unset, fixing interrupts, etc. + */ +void hsw_disable_lcpll(struct drm_i915_private *dev_priv, + bool switch_to_fclk, bool allow_power_down) +{ + uint32_t val; + + assert_can_disable_lcpll(dev_priv); + + val = I915_READ(LCPLL_CTL); + + if (switch_to_fclk) { + val |= LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_atomic_us(I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE, 1)) + DRM_ERROR("Switching to FCLK failed\n"); + + val = I915_READ(LCPLL_CTL); + } + + val |= LCPLL_PLL_DISABLE; + I915_WRITE(LCPLL_CTL, val); + POSTING_READ(LCPLL_CTL); + + if (wait_for((I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK) == 0, 1)) + DRM_ERROR("LCPLL still locked\n"); + + val = I915_READ(D_COMP); + val |= D_COMP_COMP_DISABLE; + I915_WRITE(D_COMP, val); + POSTING_READ(D_COMP); + ndelay(100); + + if (wait_for((I915_READ(D_COMP) & D_COMP_RCOMP_IN_PROGRESS) == 0, 1)) + DRM_ERROR("D_COMP RCOMP still in progress\n"); + + if (allow_power_down) { + val = I915_READ(LCPLL_CTL); + val |= LCPLL_POWER_DOWN_ALLOW; + I915_WRITE(LCPLL_CTL, val); + POSTING_READ(LCPLL_CTL); + } +} + +/* + * Fully restores LCPLL, disallowing power down and switching back to LCPLL + * source. + */ +void hsw_restore_lcpll(struct drm_i915_private *dev_priv) +{ + uint32_t val; + + val = I915_READ(LCPLL_CTL); + + if ((val & (LCPLL_PLL_LOCK | LCPLL_PLL_DISABLE | LCPLL_CD_SOURCE_FCLK | + LCPLL_POWER_DOWN_ALLOW)) == LCPLL_PLL_LOCK) + return; + + if (val & LCPLL_POWER_DOWN_ALLOW) { + val &= ~LCPLL_POWER_DOWN_ALLOW; + I915_WRITE(LCPLL_CTL, val); + } + + val = I915_READ(D_COMP); + val |= D_COMP_COMP_FORCE; + val &= ~D_COMP_COMP_DISABLE; + I915_WRITE(D_COMP, val); + I915_READ(D_COMP); + + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_PLL_DISABLE; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for(I915_READ(LCPLL_CTL) & LCPLL_PLL_LOCK, 5)) + DRM_ERROR("LCPLL not locked yet\n"); + + if (val & LCPLL_CD_SOURCE_FCLK) { + val = I915_READ(LCPLL_CTL); + val &= ~LCPLL_CD_SOURCE_FCLK; + I915_WRITE(LCPLL_CTL, val); + + if (wait_for_atomic_us((I915_READ(LCPLL_CTL) & + LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1)) + DRM_ERROR("Switching back to LCPLL failed\n"); + } +} + static void haswell_modeset_global_resources(struct drm_device *dev) { bool enable = false; |