diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/radeon/atombios.h | 1109 |
1 files changed, 1048 insertions, 61 deletions
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h index 1b50ad8919d..4b04ba3828e 100644 --- a/drivers/gpu/drm/radeon/atombios.h +++ b/drivers/gpu/drm/radeon/atombios.h @@ -101,6 +101,7 @@ #define ATOM_LCD_SELFTEST_START (ATOM_DISABLE+5) #define ATOM_LCD_SELFTEST_STOP (ATOM_ENABLE+5) #define ATOM_ENCODER_INIT (ATOM_DISABLE+7) +#define ATOM_INIT (ATOM_DISABLE+7) #define ATOM_GET_STATUS (ATOM_DISABLE+8) #define ATOM_BLANKING 1 @@ -251,25 +252,25 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetEngineClock; //Function Table,directly used by various SW components,latest version 1.1 USHORT SetMemoryClock; //Function Table,directly used by various SW components,latest version 1.1 USHORT SetPixelClock; //Function Table,directly used by various SW components,latest version 1.2 - USHORT DynamicClockGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init + USHORT EnableDispPowerGating; //Atomic Table, indirectly used by various SW components,called from ASIC_Init USHORT ResetMemoryDLL; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock USHORT ResetMemoryDevice; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock - USHORT MemoryPLLInit; - USHORT AdjustDisplayPll; //only used by Bios + USHORT MemoryPLLInit; //Atomic Table, used only by Bios + USHORT AdjustDisplayPll; //Atomic Table, used by various SW componentes. USHORT AdjustMemoryController; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock USHORT EnableASIC_StaticPwrMgt; //Atomic Table, only used by Bios USHORT ASIC_StaticPwrMgtStatusChange; //Obsolete , only used by Bios USHORT DAC_LoadDetection; //Atomic Table, directly used by various SW components,latest version 1.2 USHORT LVTMAEncoderControl; //Atomic Table,directly used by various SW components,latest version 1.3 - USHORT LCD1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 + USHORT HW_Misc_Operation; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC1EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC2EncoderControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DVOOutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT CV1OutputControl; //Atomic Table, Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead - USHORT GetConditionalGoldenSetting; //only used by Bios + USHORT GetConditionalGoldenSetting; //Only used by Bios USHORT TVEncoderControl; //Function Table,directly used by various SW components,latest version 1.1 - USHORT TMDSAEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3 - USHORT LVDSEncoderControl; //Atomic Table, directly used by various SW components,latest version 1.3 + USHORT PatchMCSetting; //only used by BIOS + USHORT MC_SEQ_Control; //only used by BIOS USHORT TV1OutputControl; //Atomic Table, Obsolete from Ry6xx, use DAC2 Output instead USHORT EnableScaler; //Atomic Table, used only by Bios USHORT BlankCRTC; //Atomic Table, directly used by various SW components,latest version 1.1 @@ -282,7 +283,7 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetCRTC_Replication; //Atomic Table, used only by Bios USHORT SelectCRTC_Source; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT EnableGraphSurfaces; //Atomic Table, used only by Bios - USHORT UpdateCRTC_DoubleBufferRegisters; + USHORT UpdateCRTC_DoubleBufferRegisters; //Atomic Table, used only by Bios USHORT LUT_AutoFill; //Atomic Table, only used by Bios USHORT EnableHW_IconCursor; //Atomic Table, only used by Bios USHORT GetMemoryClock; //Atomic Table, directly used by various SW components,latest version 1.1 @@ -308,27 +309,36 @@ typedef struct _ATOM_MASTER_LIST_OF_COMMAND_TABLES{ USHORT SetVoltage; //Function Table,directly and/or indirectly used by various SW components,latest version 1.1 USHORT DAC1OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 USHORT DAC2OutputControl; //Atomic Table, directly used by various SW components,latest version 1.1 - USHORT SetupHWAssistedI2CStatus; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" + USHORT ComputeMemoryClockParam; //Function Table,only used by Bios, obsolete soon.Switch to use "ReadEDIDFromHWAssistedI2C" USHORT ClockSource; //Atomic Table, indirectly used by various SW components,called from ASIC_Init USHORT MemoryDeviceInit; //Atomic Table, indirectly used by various SW components,called from SetMemoryClock - USHORT EnableYUV; //Atomic Table, indirectly used by various SW components,called from EnableVGARender + USHORT GetDispObjectInfo; //Atomic Table, indirectly used by various SW components,called from EnableVGARender USHORT DIG1EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG2EncoderControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG1TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT DIG2TransmitterControl; //Atomic Table,directly used by various SW components,latest version 1.1 USHORT ProcessAuxChannelTransaction; //Function Table,only used by Bios USHORT DPEncoderService; //Function Table,only used by Bios + USHORT GetVoltageInfo; //Function Table,only used by Bios since SI }ATOM_MASTER_LIST_OF_COMMAND_TABLES; // For backward compatible #define ReadEDIDFromHWAssistedI2C ProcessI2cChannelTransaction -#define UNIPHYTransmitterControl DIG1TransmitterControl -#define LVTMATransmitterControl DIG2TransmitterControl +#define DPTranslatorControl DIG2EncoderControl +#define UNIPHYTransmitterControl DIG1TransmitterControl +#define LVTMATransmitterControl DIG2TransmitterControl #define SetCRTC_DPM_State GetConditionalGoldenSetting #define SetUniphyInstance ASIC_StaticPwrMgtStatusChange #define HPDInterruptService ReadHWAssistedI2CStatus #define EnableVGA_Access GetSCLKOverMCLKRatio -#define GetDispObjectInfo EnableYUV +#define EnableYUV GetDispObjectInfo +#define DynamicClockGating EnableDispPowerGating +#define SetupHWAssistedI2CStatus ComputeMemoryClockParam + +#define TMDSAEncoderControl PatchMCSetting +#define LVDSEncoderControl MC_SEQ_Control +#define LCD1OutputControl HW_Misc_Operation + typedef struct _ATOM_MASTER_COMMAND_TABLE { @@ -495,6 +505,34 @@ typedef struct _COMPUTE_MEMORY_ENGINE_PLL_PARAMETERS_V5 // ucInputFlag #define ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN 1 // 1-StrobeMode, 0-PerformanceMode +// use for ComputeMemoryClockParamTable +typedef struct _COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1 +{ + union + { + ULONG ulClock; + ATOM_S_MPLL_FB_DIVIDER ulFbDiv; //Output:UPPER_WORD=FB_DIV_INTEGER, LOWER_WORD=FB_DIV_FRAC shl (16-FB_FRACTION_BITS) + }; + UCHAR ucDllSpeed; //Output + UCHAR ucPostDiv; //Output + union{ + UCHAR ucInputFlag; //Input : ATOM_PLL_INPUT_FLAG_PLL_STROBE_MODE_EN: 1-StrobeMode, 0-PerformanceMode + UCHAR ucPllCntlFlag; //Output: + }; + UCHAR ucBWCntl; +}COMPUTE_MEMORY_CLOCK_PARAM_PARAMETERS_V2_1; + +// definition of ucInputFlag +#define MPLL_INPUT_FLAG_STROBE_MODE_EN 0x01 +// definition of ucPllCntlFlag +#define MPLL_CNTL_FLAG_VCO_MODE_MASK 0x03 +#define MPLL_CNTL_FLAG_BYPASS_DQ_PLL 0x04 +#define MPLL_CNTL_FLAG_QDR_ENABLE 0x08 +#define MPLL_CNTL_FLAG_AD_HALF_RATE 0x10 + +//MPLL_CNTL_FLAG_BYPASS_AD_PLL has a wrong name, should be BYPASS_DQ_PLL +#define MPLL_CNTL_FLAG_BYPASS_AD_PLL 0x04 + typedef struct _DYNAMICE_MEMORY_SETTINGS_PARAMETER { ATOM_COMPUTE_CLOCK_FREQ ulClock; @@ -562,6 +600,16 @@ typedef struct _DYNAMIC_CLOCK_GATING_PARAMETERS #define DYNAMIC_CLOCK_GATING_PS_ALLOCATION DYNAMIC_CLOCK_GATING_PARAMETERS /****************************************************************************/ +// Structure used by EnableDispPowerGatingTable.ctb +/****************************************************************************/ +typedef struct _ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1 +{ + UCHAR ucDispPipeId; // ATOM_CRTC1, ATOM_CRTC2, ... + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucPadding[2]; +}ENABLE_DISP_POWER_GATING_PARAMETERS_V2_1; + +/****************************************************************************/ // Structure used by EnableASIC_StaticPwrMgtTable.ctb /****************************************************************************/ typedef struct _ENABLE_ASIC_STATIC_PWR_MGT_PARAMETERS @@ -807,6 +855,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_1_62GHZ 0x00 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_2_70GHZ 0x01 #define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_5_40GHZ 0x02 +#define ATOM_ENCODER_CONFIG_V4_DPLINKRATE_3_24GHZ 0x03 #define ATOM_ENCODER_CONFIG_V4_ENCODER_SEL 0x70 #define ATOM_ENCODER_CONFIG_V4_DIG0_ENCODER 0x00 #define ATOM_ENCODER_CONFIG_V4_DIG1_ENCODER 0x10 @@ -814,6 +863,7 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4 #define ATOM_ENCODER_CONFIG_V4_DIG3_ENCODER 0x30 #define ATOM_ENCODER_CONFIG_V4_DIG4_ENCODER 0x40 #define ATOM_ENCODER_CONFIG_V4_DIG5_ENCODER 0x50 +#define ATOM_ENCODER_CONFIG_V4_DIG6_ENCODER 0x60 typedef struct _DIG_ENCODER_CONTROL_PARAMETERS_V4 { @@ -1171,6 +1221,106 @@ typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V4 #define ATOM_TRANSMITTER_CONFIG_V4_TRANSMITTER3 0x80 //EF +typedef struct _ATOM_DIG_TRANSMITTER_CONFIG_V5 +{ +#if ATOM_BIG_ENDIAN + UCHAR ucReservd1:1; + UCHAR ucHPDSel:3; + UCHAR ucPhyClkSrcId:2; + UCHAR ucCoherentMode:1; + UCHAR ucReserved:1; +#else + UCHAR ucReserved:1; + UCHAR ucCoherentMode:1; + UCHAR ucPhyClkSrcId:2; + UCHAR ucHPDSel:3; + UCHAR ucReservd1:1; +#endif +}ATOM_DIG_TRANSMITTER_CONFIG_V5; + +typedef struct _DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 +{ + USHORT usSymClock; // Encoder Clock in 10kHz,(DP mode)= linkclock/10, (TMDS/LVDS/HDMI)= pixel clock, (HDMI deep color), =pixel clock * deep_color_ratio + UCHAR ucPhyId; // 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4= UNIPHYE 5=UNIPHYF + UCHAR ucAction; // define as ATOM_TRANSMITER_ACTION_xxx + UCHAR ucLaneNum; // indicate lane number 1-8 + UCHAR ucConnObjId; // Connector Object Id defined in ObjectId.h + UCHAR ucDigMode; // indicate DIG mode + union{ + ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; + UCHAR ucConfig; + }; + UCHAR ucDigEncoderSel; // indicate DIG front end encoder + UCHAR ucDPLaneSet; + UCHAR ucReserved; + UCHAR ucReserved1; +}DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5; + +//ucPhyId +#define ATOM_PHY_ID_UNIPHYA 0 +#define ATOM_PHY_ID_UNIPHYB 1 +#define ATOM_PHY_ID_UNIPHYC 2 +#define ATOM_PHY_ID_UNIPHYD 3 +#define ATOM_PHY_ID_UNIPHYE 4 +#define ATOM_PHY_ID_UNIPHYF 5 +#define ATOM_PHY_ID_UNIPHYG 6 + +// ucDigEncoderSel +#define ATOM_TRANMSITTER_V5__DIGA_SEL 0x01 +#define ATOM_TRANMSITTER_V5__DIGB_SEL 0x02 +#define ATOM_TRANMSITTER_V5__DIGC_SEL 0x04 +#define ATOM_TRANMSITTER_V5__DIGD_SEL 0x08 +#define ATOM_TRANMSITTER_V5__DIGE_SEL 0x10 +#define ATOM_TRANMSITTER_V5__DIGF_SEL 0x20 +#define ATOM_TRANMSITTER_V5__DIGG_SEL 0x40 + +// ucDigMode +#define ATOM_TRANSMITTER_DIGMODE_V5_DP 0 +#define ATOM_TRANSMITTER_DIGMODE_V5_LVDS 1 +#define ATOM_TRANSMITTER_DIGMODE_V5_DVI 2 +#define ATOM_TRANSMITTER_DIGMODE_V5_HDMI 3 +#define ATOM_TRANSMITTER_DIGMODE_V5_SDVO 4 +#define ATOM_TRANSMITTER_DIGMODE_V5_DP_MST 5 + +// ucDPLaneSet +#define DP_LANE_SET__0DB_0_4V 0x00 +#define DP_LANE_SET__0DB_0_6V 0x01 +#define DP_LANE_SET__0DB_0_8V 0x02 +#define DP_LANE_SET__0DB_1_2V 0x03 +#define DP_LANE_SET__3_5DB_0_4V 0x08 +#define DP_LANE_SET__3_5DB_0_6V 0x09 +#define DP_LANE_SET__3_5DB_0_8V 0x0a +#define DP_LANE_SET__6DB_0_4V 0x10 +#define DP_LANE_SET__6DB_0_6V 0x11 +#define DP_LANE_SET__9_5DB_0_4V 0x18 + +// ATOM_DIG_TRANSMITTER_CONFIG_V5 asConfig; +// Bit1 +#define ATOM_TRANSMITTER_CONFIG_V5_COHERENT 0x02 + +// Bit3:2 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_MASK 0x0c +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SEL_SHIFT 0x02 + +#define ATOM_TRANSMITTER_CONFIG_V5_P1PLL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_P2PLL 0x04 +#define ATOM_TRANSMITTER_CONFIG_V5_P0PLL 0x08 +#define ATOM_TRANSMITTER_CONFIG_V5_REFCLK_SRC_EXT 0x0c +// Bit6:4 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_MASK 0x70 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD_SEL_SHIFT 0x04 + +#define ATOM_TRANSMITTER_CONFIG_V5_NO_HPD_SEL 0x00 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD1_SEL 0x10 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD2_SEL 0x20 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD3_SEL 0x30 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD4_SEL 0x40 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD5_SEL 0x50 +#define ATOM_TRANSMITTER_CONFIG_V5_HPD6_SEL 0x60 + +#define DIG_TRANSMITTER_CONTROL_PS_ALLOCATION_V1_5 DIG_TRANSMITTER_CONTROL_PARAMETERS_V1_5 + + /****************************************************************************/ // Structures used by ExternalEncoderControlTable V1.3 // ASIC Families: Evergreen, Llano, NI @@ -1793,6 +1943,7 @@ typedef struct _ENABLE_SPREAD_SPECTRUM_ON_PPLL_V2 #define ATOM_PPLL_SS_TYPE_V3_P1PLL 0x00 #define ATOM_PPLL_SS_TYPE_V3_P2PLL 0x04 #define ATOM_PPLL_SS_TYPE_V3_DCPLL 0x08 +#define ATOM_PPLL_SS_TYPE_V3_P0PLL ATOM_PPLL_SS_TYPE_V3_DCPLL #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_MASK 0x00FF #define ATOM_PPLL_SS_AMOUNT_V3_FBDIV_SHIFT 0 #define ATOM_PPLL_SS_AMOUNT_V3_NFRAC_MASK 0x0F00 @@ -2030,12 +2181,77 @@ typedef struct _SET_VOLTAGE_PARAMETERS_V2 USHORT usVoltageLevel; // real voltage level }SET_VOLTAGE_PARAMETERS_V2; + +typedef struct _SET_VOLTAGE_PARAMETERS_V1_3 +{ + UCHAR ucVoltageType; // To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Indicate action: Set voltage level + USHORT usVoltageLevel; // real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) +}SET_VOLTAGE_PARAMETERS_V1_3; + +//ucVoltageType +#define VOLTAGE_TYPE_VDDC 1 +#define VOLTAGE_TYPE_MVDDC 2 +#define VOLTAGE_TYPE_MVDDQ 3 +#define VOLTAGE_TYPE_VDDCI 4 + +//SET_VOLTAGE_PARAMETERS_V3.ucVoltageMode +#define ATOM_SET_VOLTAGE 0 //Set voltage Level +#define ATOM_INIT_VOLTAGE_REGULATOR 3 //Init Regulator +#define ATOM_SET_VOLTAGE_PHASE 4 //Set Vregulator Phase +#define ATOM_GET_MAX_VOLTAGE 6 //Get Max Voltage, not used in SetVoltageTable v1.3 +#define ATOM_GET_VOLTAGE_LEVEL 6 //Get Voltage level from vitual voltage ID + +// define vitual voltage id in usVoltageLevel +#define ATOM_VIRTUAL_VOLTAGE_ID0 0xff01 +#define ATOM_VIRTUAL_VOLTAGE_ID1 0xff02 +#define ATOM_VIRTUAL_VOLTAGE_ID2 0xff03 +#define ATOM_VIRTUAL_VOLTAGE_ID3 0xff04 + typedef struct _SET_VOLTAGE_PS_ALLOCATION { SET_VOLTAGE_PARAMETERS sASICSetVoltage; WRITE_ONE_BYTE_HW_I2C_DATA_PS_ALLOCATION sReserved; }SET_VOLTAGE_PS_ALLOCATION; +// New Added from SI for GetVoltageInfoTable, input parameter structure +typedef struct _GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1 +{ + UCHAR ucVoltageType; // Input: To tell which voltage to set up, VDDC/MVDDC/MVDDQ/VDDCI + UCHAR ucVoltageMode; // Input: Indicate action: Get voltage info + USHORT usVoltageLevel; // Input: real voltage level in unit of mv or Voltage Phase (0, 1, 2, .. ) or Leakage Id + ULONG ulReserved; +}GET_VOLTAGE_INFO_INPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_VID +typedef struct _GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + ULONG ulVotlageGpioState; + ULONG ulVoltageGPioMask; +}GET_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + +// New Added from SI for GetVoltageInfoTable, output parameter structure when ucVotlageMode == ATOM_GET_VOLTAGE_STATEx_LEAKAGE_VID +typedef struct _GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1 +{ + USHORT usVoltageLevel; + USHORT usVoltageId; // Voltage Id programmed in Voltage Regulator + ULONG ulReseved; +}GET_LEAKAGE_VOLTAGE_INFO_OUTPUT_PARAMETER_V1_1; + + +// GetVoltageInfo v1.1 ucVoltageMode +#define ATOM_GET_VOLTAGE_VID 0x00 +#define ATOM_GET_VOTLAGE_INIT_SEQ 0x03 +#define ATOM_GET_VOLTTAGE_PHASE_PHASE_VID 0x04 +// for SI, this state map to 0xff02 voltage state in Power Play table, which is power boost state +#define ATOM_GET_VOLTAGE_STATE0_LEAKAGE_VID 0x10 + +// for SI, this state map to 0xff01 voltage state in Power Play table, which is performance state +#define ATOM_GET_VOLTAGE_STATE1_LEAKAGE_VID 0x11 +// undefined power state +#define ATOM_GET_VOLTAGE_STATE2_LEAKAGE_VID 0x12 +#define ATOM_GET_VOLTAGE_STATE3_LEAKAGE_VID 0x13 + /****************************************************************************/ // Structures used by TVEncoderControlTable /****************************************************************************/ @@ -2065,9 +2281,9 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT MultimediaConfigInfo; // Only used by MM Lib,latest version 2.1, not configuable from Bios, need to include the table to build Bios USHORT StandardVESA_Timing; // Only used by Bios USHORT FirmwareInfo; // Shared by various SW components,latest version 1.4 - USHORT DAC_Info; // Will be obsolete from R600 + USHORT PaletteData; // Only used by BIOS USHORT LCD_Info; // Shared by various SW components,latest version 1.3, was called LVDS_Info - USHORT TMDS_Info; // Will be obsolete from R600 + USHORT DIGTransmitterInfo; // Internal used by VBIOS only version 3.1 USHORT AnalogTV_Info; // Shared by various SW components,latest version 1.1 USHORT SupportedDevicesInfo; // Will be obsolete from R600 USHORT GPIO_I2C_Info; // Shared by various SW components,latest version 1.2 will be used from R600 @@ -2096,15 +2312,16 @@ typedef struct _ATOM_MASTER_LIST_OF_DATA_TABLES USHORT PowerSourceInfo; // Shared by various SW components, latest versoin 1.1 }ATOM_MASTER_LIST_OF_DATA_TABLES; -// For backward compatible -#define LVDS_Info LCD_Info - typedef struct _ATOM_MASTER_DATA_TABLE { ATOM_COMMON_TABLE_HEADER sHeader; ATOM_MASTER_LIST_OF_DATA_TABLES ListOfDataTables; }ATOM_MASTER_DATA_TABLE; +// For backward compatible +#define LVDS_Info LCD_Info +#define DAC_Info PaletteData +#define TMDS_Info DIGTransmitterInfo /****************************************************************************/ // Structure used in MultimediaCapabilityInfoTable @@ -2171,7 +2388,9 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO typedef struct _ATOM_FIRMWARE_CAPABILITY { #if ATOM_BIG_ENDIAN - USHORT Reserved:3; + USHORT Reserved:1; + USHORT SCL2Redefined:1; + USHORT PostWithoutModeSet:1; USHORT HyperMemory_Size:4; USHORT HyperMemory_Support:1; USHORT PPMode_Assigned:1; @@ -2193,7 +2412,9 @@ typedef struct _ATOM_FIRMWARE_CAPABILITY USHORT PPMode_Assigned:1; USHORT HyperMemory_Support:1; USHORT HyperMemory_Size:4; - USHORT Reserved:3; + USHORT PostWithoutModeSet:1; + USHORT SCL2Redefined:1; + USHORT Reserved:1; #endif }ATOM_FIRMWARE_CAPABILITY; @@ -2418,7 +2639,8 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2 USHORT usLcdMaxPixelClockPLL_Output; // In MHz unit ULONG ulReserved4; //Was ulAsicMaximumVoltage ULONG ulMinPixelClockPLL_Output; //In 10Khz unit - ULONG ulReserved5; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input + UCHAR ucRemoteDisplayConfig; + UCHAR ucReserved5[3]; //Was usMinEngineClockPLL_Input and usMaxEngineClockPLL_Input ULONG ulReserved6; //Was usMinEngineClockPLL_Output and usMinMemoryClockPLL_Input ULONG ulReserved7; //Was usMaxMemoryClockPLL_Input and usMinMemoryClockPLL_Output USHORT usReserved11; //Was usMaxPixelClock; //In 10Khz unit, Max. Pclk used only for DAC @@ -2438,6 +2660,11 @@ typedef struct _ATOM_FIRMWARE_INFO_V2_2 #define ATOM_FIRMWARE_INFO_LAST ATOM_FIRMWARE_INFO_V2_2 + +// definition of ucRemoteDisplayConfig +#define REMOTE_DISPLAY_DISABLE 0x00 +#define REMOTE_DISPLAY_ENABLE 0x01 + /****************************************************************************/ // Structures used in IntegratedSystemInfoTable /****************************************************************************/ @@ -2660,8 +2887,9 @@ usMinDownStreamHTLinkWidth: same as above. #define INTEGRATED_SYSTEM_INFO__AMD_CPU__GREYHOUND 2 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__K8 3 #define INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH 4 +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI 5 -#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__PHARAOH // this deff reflects max defined CPU code +#define INTEGRATED_SYSTEM_INFO__AMD_CPU__MAX_CODE INTEGRATED_SYSTEM_INFO__AMD_CPU__OROCHI // this deff reflects max defined CPU code #define SYSTEM_CONFIG_POWEREXPRESS_ENABLE 0x00000001 #define SYSTEM_CONFIG_RUN_AT_OVERDRIVE_ENGINE 0x00000002 @@ -2753,6 +2981,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V5 #define ASIC_INT_DIG4_ENCODER_ID 0x0b #define ASIC_INT_DIG5_ENCODER_ID 0x0c #define ASIC_INT_DIG6_ENCODER_ID 0x0d +#define ASIC_INT_DIG7_ENCODER_ID 0x0e //define Encoder attribute #define ATOM_ANALOG_ENCODER 0 @@ -3226,15 +3455,23 @@ typedef struct _ATOM_LCD_INFO_V13 UCHAR ucPowerSequenceDIGONtoDE_in4Ms; UCHAR ucPowerSequenceDEtoVARY_BL_in4Ms; - UCHAR ucPowerSequenceDEtoDIGON_in4Ms; UCHAR ucPowerSequenceVARY_BLtoDE_in4Ms; + UCHAR ucPowerSequenceDEtoDIGON_in4Ms; UCHAR ucOffDelay_in4Ms; UCHAR ucPowerSequenceVARY_BLtoBLON_in4Ms; UCHAR ucPowerSequenceBLONtoVARY_BL_in4Ms; UCHAR ucReserved1; - ULONG ulReserved[4]; + UCHAR ucDPCD_eDP_CONFIGURATION_CAP; // dpcd 0dh + UCHAR ucDPCD_MAX_LINK_RATE; // dpcd 01h + UCHAR ucDPCD_MAX_LANE_COUNT; // dpcd 02h + UCHAR ucDPCD_MAX_DOWNSPREAD; // dpcd 03h + + USHORT usMaxPclkFreqInSingleLink; // Max PixelClock frequency in single link mode. + UCHAR uceDPToLVDSRxId; + UCHAR ucLcdReservd; + ULONG ulReserved[2]; }ATOM_LCD_INFO_V13; #define ATOM_LCD_INFO_LAST ATOM_LCD_INFO_V13 @@ -3273,6 +3510,11 @@ typedef struct _ATOM_LCD_INFO_V13 //Use this cap bit for a quick reference whether an embadded panel (LCD1 ) is LVDS or eDP. #define LCDPANEL_CAP_V13_eDP 0x4 // = LCDPANEL_CAP_eDP no change comparing to previous version +//uceDPToLVDSRxId +#define eDP_TO_LVDS_RX_DISABLE 0x00 // no eDP->LVDS translator chip +#define eDP_TO_LVDS_COMMON_ID 0x01 // common eDP->LVDS translator chip without AMD SW init +#define eDP_TO_LVDS_RT_ID 0x02 // RT tanslator which require AMD SW init + typedef struct _ATOM_PATCH_RECORD_MODE { UCHAR ucRecordType; @@ -3317,6 +3559,7 @@ typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD #define LCD_CAP_RECORD_TYPE 3 #define LCD_FAKE_EDID_PATCH_RECORD_TYPE 4 #define LCD_PANEL_RESOLUTION_RECORD_TYPE 5 +#define LCD_EDID_OFFSET_PATCH_RECORD_TYPE 6 #define ATOM_RECORD_END_TYPE 0xFF /****************************Spread Spectrum Info Table Definitions **********************/ @@ -3528,6 +3771,7 @@ else //Non VGA case CAIL needs to claim an reserved area defined by FBAccessAreaOffset and usFBUsedbyDrvInKB in non VGA case.*/ +/***********************************************************************************/ #define ATOM_MAX_FIRMWARE_VRAM_USAGE_INFO 1 typedef struct _ATOM_FIRMWARE_VRAM_RESERVE_INFO @@ -3818,13 +4062,17 @@ typedef struct _EXT_DISPLAY_PATH ATOM_DP_CONN_CHANNEL_MAPPING asDPMapping; ATOM_DVI_CONN_CHANNEL_MAPPING asDVIMapping; }; - UCHAR ucReserved; - USHORT usReserved[2]; + UCHAR ucChPNInvert; // bit vector for up to 8 lanes, =0: P and N is not invert, =1 P and N is inverted + USHORT usCaps; + USHORT usReserved; }EXT_DISPLAY_PATH; #define NUMBER_OF_UCHAR_FOR_GUID 16 #define MAX_NUMBER_OF_EXT_DISPLAY_PATH 7 +//usCaps +#define EXT_DISPLAY_PATH_CAPS__HBR2_DISABLE 0x01 + typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO { ATOM_COMMON_TABLE_HEADER sHeader; @@ -3832,7 +4080,9 @@ typedef struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO EXT_DISPLAY_PATH sPath[MAX_NUMBER_OF_EXT_DISPLAY_PATH]; // total of fixed 7 entries. UCHAR ucChecksum; // a simple Checksum of the sum of whole structure equal to 0x0. UCHAR uc3DStereoPinId; // use for eDP panel - UCHAR Reserved [6]; // for potential expansion + UCHAR ucRemoteDisplayConfig; + UCHAR uceDPToLVDSRxId; + UCHAR Reserved[4]; // for potential expansion }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO; //Related definitions, all records are different but they have a commond header @@ -3977,6 +4227,7 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD #define GPIO_PIN_STATE_ACTIVE_HIGH 0x1 // Indexes to GPIO array in GLSync record +// GLSync record is for Frame Lock/Gen Lock feature. #define ATOM_GPIO_INDEX_GLSYNC_REFCLK 0 #define ATOM_GPIO_INDEX_GLSYNC_HSYNC 1 #define ATOM_GPIO_INDEX_GLSYNC_VSYNC 2 @@ -3984,7 +4235,9 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD #define ATOM_GPIO_INDEX_GLSYNC_SWAP_GNT 4 #define ATOM_GPIO_INDEX_GLSYNC_INTERRUPT 5 #define ATOM_GPIO_INDEX_GLSYNC_V_RESET 6 -#define ATOM_GPIO_INDEX_GLSYNC_MAX 7 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_CNTL 7 +#define ATOM_GPIO_INDEX_GLSYNC_SWAP_SEL 8 +#define ATOM_GPIO_INDEX_GLSYNC_MAX 9 typedef struct _ATOM_ENCODER_DVO_CF_RECORD { @@ -3994,7 +4247,8 @@ typedef struct _ATOM_ENCODER_DVO_CF_RECORD }ATOM_ENCODER_DVO_CF_RECORD; // Bit maps for ATOM_ENCODER_CAP_RECORD.ucEncoderCap -#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by this path +#define ATOM_ENCODER_CAP_RECORD_HBR2 0x01 // DP1.2 HBR2 is supported by HW encoder +#define ATOM_ENCODER_CAP_RECORD_HBR2_EN 0x02 // DP1.2 HBR2 setting is qualified and HBR2 can be enabled typedef struct _ATOM_ENCODER_CAP_RECORD { @@ -4003,11 +4257,13 @@ typedef struct _ATOM_ENCODER_CAP_RECORD USHORT usEncoderCap; struct { #if ATOM_BIG_ENDIAN - USHORT usReserved:15; // Bit1-15 may be defined for other capability in future + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. #else USHORT usHBR2Cap:1; // Bit0 is for DP1.2 HBR2 capability. - USHORT usReserved:15; // Bit1-15 may be defined for other capability in future + USHORT usHBR2En:1; // Bit1 is for DP1.2 HBR2 enable + USHORT usReserved:14; // Bit1-15 may be defined for other capability in future #endif }; }; @@ -4157,6 +4413,7 @@ typedef struct _ATOM_VOLTAGE_CONTROL #define VOLTAGE_CONTROL_ID_VT1556M 0x07 #define VOLTAGE_CONTROL_ID_CHL822x 0x08 #define VOLTAGE_CONTROL_ID_VT1586M 0x09 +#define VOLTAGE_CONTROL_ID_UP1637 0x0A typedef struct _ATOM_VOLTAGE_OBJECT { @@ -4193,6 +4450,69 @@ typedef struct _ATOM_LEAKID_VOLTAGE USHORT usVoltage; }ATOM_LEAKID_VOLTAGE; +typedef struct _ATOM_VOLTAGE_OBJECT_HEADER_V3{ + UCHAR ucVoltageType; //Indicate Voltage Source: VDDC, MVDDC, MVDDQ or MVDDCI + UCHAR ucVoltageMode; //Indicate voltage control mode: Init/Set/Leakage/Set phase + USHORT usSize; //Size of Object +}ATOM_VOLTAGE_OBJECT_HEADER_V3; + +typedef struct _VOLTAGE_LUT_ENTRY_V2 +{ + ULONG ulVoltageId; // The Voltage ID which is used to program GPIO register + USHORT usVoltageValue; // The corresponding Voltage Value, in mV +}VOLTAGE_LUT_ENTRY_V2; + +typedef struct _LEAKAGE_VOLTAGE_LUT_ENTRY_V2 +{ + USHORT usVoltageLevel; // The Voltage ID which is used to program GPIO register + USHORT usVoltageId; + USHORT usLeakageId; // The corresponding Voltage Value, in mV +}LEAKAGE_VOLTAGE_LUT_ENTRY_V2; + +typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; + UCHAR ucVoltageRegulatorId; //Indicate Voltage Regulator Id + UCHAR ucVoltageControlI2cLine; + UCHAR ucVoltageControlAddress; + UCHAR ucVoltageControlOffset; + ULONG ulReserved; + VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff +}ATOM_I2C_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; + UCHAR ucVoltageGpioCntlId; // default is 0 which indicate control through CG VID mode + UCHAR ucGpioEntryNum; // indiate the entry numbers of Votlage/Gpio value Look up table + UCHAR ucPhaseDelay; // phase delay in unit of micro second + UCHAR ucReserved; + ULONG ulGpioMaskVal; // GPIO Mask value + VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1]; +}ATOM_GPIO_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 +{ + ATOM_VOLTAGE_OBJECT_HEADER_V3 sHeader; + UCHAR ucLeakageCntlId; // default is 0 + UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table + UCHAR ucReserved[2]; + ULONG ulMaxVoltageLevel; + LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1]; +}ATOM_LEAKAGE_VOLTAGE_OBJECT_V3; + +typedef union _ATOM_VOLTAGE_OBJECT_V3{ + ATOM_GPIO_VOLTAGE_OBJECT_V3 asGpioVoltageObj; + ATOM_I2C_VOLTAGE_OBJECT_V3 asI2cVoltageObj; + ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 asLeakageObj; +}ATOM_VOLTAGE_OBJECT_V3; + +typedef struct _ATOM_VOLTAGE_OBJECT_INFO_V3_1 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ATOM_VOLTAGE_OBJECT_V3 asVoltageObj[3]; //Info for Voltage control +}ATOM_VOLTAGE_OBJECT_INFO_V3_1; + typedef struct _ATOM_ASIC_PROFILE_VOLTAGE { UCHAR ucProfileId; @@ -4305,7 +4625,18 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 USHORT usHDMISSpreadRateIn10Hz; USHORT usDVISSPercentage; USHORT usDVISSpreadRateIn10Hz; - ULONG ulReserved3[21]; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucLVDSReserved; + ULONG ulReserved3[15]; ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; }ATOM_INTEGRATED_SYSTEM_INFO_V6; @@ -4313,9 +4644,16 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V6 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 #define INTEGRATED_SYSTEM_INFO_V6_GPUCAPINFO__DISABLE_AUX_HW_MODE_DETECTION 0x08 -// ulOtherDisplayMisc -#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 +//ucLVDSMisc: +#define SYS_INFO_LVDSMISC__888_FPDI_MODE 0x01 +#define SYS_INFO_LVDSMISC__DL_CH_SWAP 0x02 +#define SYS_INFO_LVDSMISC__888_BPC 0x04 +#define SYS_INFO_LVDSMISC__OVERRIDE_EN 0x08 +#define SYS_INFO_LVDSMISC__BLON_ACTIVE_LOW 0x10 +// not used any more +#define SYS_INFO_LVDSMISC__VSYNC_ACTIVE_LOW 0x04 +#define SYS_INFO_LVDSMISC__HSYNC_ACTIVE_LOW 0x08 /********************************************************************************************************************** ATOM_INTEGRATED_SYSTEM_INFO_V6 Description @@ -4384,7 +4722,208 @@ ucUMAChannelNumber: System memory channel numbers. ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. -sAvail_SCLK[5]: Arrays to provide available list of SLCK and corresponding voltage, order from low to high +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high +ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. +ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. +ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. +ulDDR_DLL_PowerUpTime: DDR PHY DLL power up time. Unit in ns. +ulDDR_PLL_PowerUpTime: DDR PHY PLL power up time. Unit in ns. +usPCIEClkSSPercentage: PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%. +usPCIEClkSSType: PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread. +usLvdsSSPercentage: LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. +usLvdsSSpreadRateIn10Hz: LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. +usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) +**********************************************************************************************************************/ + +// this Table is used for Liano/Ontario APU +typedef struct _ATOM_FUSION_SYSTEM_INFO_V1 +{ + ATOM_INTEGRATED_SYSTEM_INFO_V6 sIntegratedSysInfo; + ULONG ulPowerplayTable[128]; +}ATOM_FUSION_SYSTEM_INFO_V1; +/********************************************************************************************************************** + ATOM_FUSION_SYSTEM_INFO_V1 Description +sIntegratedSysInfo: refer to ATOM_INTEGRATED_SYSTEM_INFO_V6 definition. +ulPowerplayTable[128]: This 512 bytes memory is used to save ATOM_PPLIB_POWERPLAYTABLE3, starting form ulPowerplayTable[0] +**********************************************************************************************************************/ + +// this IntegrateSystemInfoTable is used for Trinity APU +typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + ULONG ulBootUpEngineClock; + ULONG ulDentistVCOFreq; + ULONG ulBootUpUMAClock; + ATOM_CLK_VOLT_CAPABILITY sDISPCLK_Voltage[4]; + ULONG ulBootUpReqDisplayVector; + ULONG ulOtherDisplayMisc; + ULONG ulGPUCapInfo; + ULONG ulSB_MMIO_Base_Addr; + USHORT usRequestedPWMFreqInHz; + UCHAR ucHtcTmpLmt; + UCHAR ucHtcHystLmt; + ULONG ulMinEngineClock; + ULONG ulSystemConfig; + ULONG ulCPUCapInfo; + USHORT usNBP0Voltage; + USHORT usNBP1Voltage; + USHORT usBootUpNBVoltage; + USHORT usExtDispConnInfoOffset; + USHORT usPanelRefreshRateRange; + UCHAR ucMemoryType; + UCHAR ucUMAChannelNumber; + UCHAR strVBIOSMsg[40]; + ULONG ulReserved[20]; + ATOM_AVAILABLE_SCLK_LIST sAvail_SCLK[5]; + ULONG ulGMCRestoreResetTime; + ULONG ulMinimumNClk; + ULONG ulIdleNClk; + ULONG ulDDR_DLL_PowerUpTime; + ULONG ulDDR_PLL_PowerUpTime; + USHORT usPCIEClkSSPercentage; + USHORT usPCIEClkSSType; + USHORT usLvdsSSPercentage; + USHORT usLvdsSSpreadRateIn10Hz; + USHORT usHDMISSPercentage; + USHORT usHDMISSpreadRateIn10Hz; + USHORT usDVISSPercentage; + USHORT usDVISSpreadRateIn10Hz; + ULONG SclkDpmBoostMargin; + ULONG SclkDpmThrottleMargin; + USHORT SclkDpmTdpLimitPG; + USHORT SclkDpmTdpLimitBoost; + ULONG ulBoostEngineCLock; + UCHAR ulBoostVid_2bit; + UCHAR EnableBoost; + USHORT GnbTdpLimit; + USHORT usMaxLVDSPclkFreqInSingleLink; + UCHAR ucLvdsMisc; + UCHAR ucLVDSReserved; + UCHAR ucLVDSPwrOnSeqDIGONtoDE_in4Ms; + UCHAR ucLVDSPwrOnSeqDEtoVARY_BL_in4Ms; + UCHAR ucLVDSPwrOffSeqVARY_BLtoDE_in4Ms; + UCHAR ucLVDSPwrOffSeqDEtoDIGON_in4Ms; + UCHAR ucLVDSOffToOnDelay_in4Ms; + UCHAR ucLVDSPwrOnSeqVARY_BLtoBLON_in4Ms; + UCHAR ucLVDSPwrOffSeqBLONtoVARY_BL_in4Ms; + UCHAR ucLVDSReserved1; + ULONG ulLCDBitDepthControlVal; + ULONG ulNbpStateMemclkFreq[4]; + USHORT usNBP2Voltage; + USHORT usNBP3Voltage; + ULONG ulNbpStateNClkFreq[4]; + UCHAR ucNBDPMEnable; + UCHAR ucReserved[3]; + UCHAR ucDPMState0VclkFid; + UCHAR ucDPMState0DclkFid; + UCHAR ucDPMState1VclkFid; + UCHAR ucDPMState1DclkFid; + UCHAR ucDPMState2VclkFid; + UCHAR ucDPMState2DclkFid; + UCHAR ucDPMState3VclkFid; + UCHAR ucDPMState3DclkFid; + ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO sExtDispConnInfo; +}ATOM_INTEGRATED_SYSTEM_INFO_V1_7; + +// ulOtherDisplayMisc +#define INTEGRATED_SYSTEM_INFO__GET_EDID_CALLBACK_FUNC_SUPPORT 0x01 +#define INTEGRATED_SYSTEM_INFO__GET_BOOTUP_DISPLAY_CALLBACK_FUNC_SUPPORT 0x02 +#define INTEGRATED_SYSTEM_INFO__GET_EXPANSION_CALLBACK_FUNC_SUPPORT 0x04 +#define INTEGRATED_SYSTEM_INFO__FAST_BOOT_SUPPORT 0x08 + +// ulGPUCapInfo +#define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 +#define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02 +#define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08 + +/********************************************************************************************************************** + ATOM_INTEGRATED_SYSTEM_INFO_V1_7 Description +ulBootUpEngineClock: VBIOS bootup Engine clock frequency, in 10kHz unit. if it is equal 0, then VBIOS use pre-defined bootup engine clock +ulDentistVCOFreq: Dentist VCO clock in 10kHz unit. +ulBootUpUMAClock: System memory boot up clock frequency in 10Khz unit. +sDISPCLK_Voltage: Report Display clock voltage requirement. + +ulBootUpReqDisplayVector: VBIOS boot up display IDs, following are supported devices in Trinity projects: + ATOM_DEVICE_CRT1_SUPPORT 0x0001 + ATOM_DEVICE_DFP1_SUPPORT 0x0008 + ATOM_DEVICE_DFP6_SUPPORT 0x0040 + ATOM_DEVICE_DFP2_SUPPORT 0x0080 + ATOM_DEVICE_DFP3_SUPPORT 0x0200 + ATOM_DEVICE_DFP4_SUPPORT 0x0400 + ATOM_DEVICE_DFP5_SUPPORT 0x0800 + ATOM_DEVICE_LCD1_SUPPORT 0x0002 +ulOtherDisplayMisc: bit[0]=0: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is not supported by SBIOS. + =1: INT15 callback function Get LCD EDID ( ax=4e08, bl=1b ) is supported by SBIOS. + bit[1]=0: INT15 callback function Get boot display( ax=4e08, bl=01h) is not supported by SBIOS + =1: INT15 callback function Get boot display( ax=4e08, bl=01h) is supported by SBIOS + bit[2]=0: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is not supported by SBIOS + =1: INT15 callback function Get panel Expansion ( ax=4e08, bl=02h) is supported by SBIOS + bit[3]=0: VBIOS fast boot is disable + =1: VBIOS fast boot is enable. ( VBIOS skip display device detection in every set mode if LCD panel is connect and LID is open) +ulGPUCapInfo: bit[0]=0: TMDS/HDMI Coherent Mode use cascade PLL mode. + =1: TMDS/HDMI Coherent Mode use signel PLL mode. + bit[1]=0: DP mode use cascade PLL mode ( New for Trinity ) + =1: DP mode use single PLL mode + bit[3]=0: Enable AUX HW mode detection logic + =1: Disable AUX HW mode detection logic + +ulSB_MMIO_Base_Addr: Physical Base address to SB MMIO space. Driver needs to initialize it for SMU usage. + +usRequestedPWMFreqInHz: When it's set to 0x0 by SBIOS: the LCD BackLight is not controlled by GPU(SW). + Any attempt to change BL using VBIOS function or enable VariBri from PP table is not effective since ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==0; + + When it's set to a non-zero frequency, the BackLight is controlled by GPU (SW) in one of two ways below: + 1. SW uses the GPU BL PWM output to control the BL, in chis case, this non-zero frequency determines what freq GPU should use; + VBIOS will set up proper PWM frequency and ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1,as the result, + Changing BL using VBIOS function is functional in both driver and non-driver present environment; + and enabling VariBri under the driver environment from PP table is optional. + + 2. SW uses other means to control BL (like DPCD),this non-zero frequency serves as a flag only indicating + that BL control from GPU is expected. + VBIOS will NOT set up PWM frequency but make ATOM_BIOS_INFO_BL_CONTROLLED_BY_GPU==1 + Changing BL using VBIOS function could be functional in both driver and non-driver present environment,but + it's per platform + and enabling VariBri under the driver environment from PP table is optional. + +ucHtcTmpLmt: Refer to D18F3x64 bit[22:16], HtcTmpLmt. + Threshold on value to enter HTC_active state. +ucHtcHystLmt: Refer to D18F3x64 bit[27:24], HtcHystLmt. + To calculate threshold off value to exit HTC_active state, which is Threshold on vlaue minus ucHtcHystLmt. +ulMinEngineClock: Minimum SCLK allowed in 10kHz unit. This is calculated based on WRCK Fuse settings. +ulSystemConfig: Bit[0]=0: PCIE Power Gating Disabled + =1: PCIE Power Gating Enabled + Bit[1]=0: DDR-DLL shut-down feature disabled. + 1: DDR-DLL shut-down feature enabled. + Bit[2]=0: DDR-PLL Power down feature disabled. + 1: DDR-PLL Power down feature enabled. +ulCPUCapInfo: TBD +usNBP0Voltage: VID for voltage on NB P0 State +usNBP1Voltage: VID for voltage on NB P1 State +usNBP2Voltage: VID for voltage on NB P2 State +usNBP3Voltage: VID for voltage on NB P3 State +usBootUpNBVoltage: Voltage Index of GNB voltage configured by SBIOS, which is suffcient to support VBIOS DISPCLK requirement. +usExtDispConnInfoOffset: Offset to sExtDispConnInfo inside the structure +usPanelRefreshRateRange: Bit vector for LCD supported refresh rate range. If DRR is requestd by the platform, at least two bits need to be set + to indicate a range. + SUPPORTED_LCD_REFRESHRATE_30Hz 0x0004 + SUPPORTED_LCD_REFRESHRATE_40Hz 0x0008 + SUPPORTED_LCD_REFRESHRATE_50Hz 0x0010 + SUPPORTED_LCD_REFRESHRATE_60Hz 0x0020 +ucMemoryType: [3:0]=1:DDR1;=2:DDR2;=3:DDR3.[7:4] is reserved. +ucUMAChannelNumber: System memory channel numbers. +ulCSR_M3_ARB_CNTL_DEFAULT[10]: Arrays with values for CSR M3 arbiter for default +ulCSR_M3_ARB_CNTL_UVD[10]: Arrays with values for CSR M3 arbiter for UVD playback. +ulCSR_M3_ARB_CNTL_FS3D[10]: Arrays with values for CSR M3 arbiter for Full Screen 3D applications. +sAvail_SCLK[5]: Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high ulGMCRestoreResetTime: GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. ulMinimumNClk: Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. ulIdleNClk: NCLK speed while memory runs in self-refresh state. Unit in 10kHz. @@ -4398,6 +4937,41 @@ usHDMISSPercentage: HDMI Spread Spectrum Percentage in unit 0.01%; usHDMISSpreadRateIn10Hz: HDMI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. usDVISSPercentage: DVI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%, =0, use VBIOS default setting. usDVISSpreadRateIn10Hz: DVI Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. +usMaxLVDSPclkFreqInSingleLink: Max pixel clock LVDS panel single link, if=0 means VBIOS use default threhold, right now it is 85Mhz +ucLVDSMisc: [bit0] LVDS 888bit panel mode =0: LVDS 888 panel in LDI mode, =1: LVDS 888 panel in FPDI mode + [bit1] LVDS panel lower and upper link mapping =0: lower link and upper link not swap, =1: lower link and upper link are swapped + [bit2] LVDS 888bit per color mode =0: 666 bit per color =1:888 bit per color + [bit3] LVDS parameter override enable =0: ucLvdsMisc parameter are not used =1: ucLvdsMisc parameter should be used + [bit4] Polarity of signal sent to digital BLON output pin. =0: not inverted(active high) =1: inverted ( active low ) +ucLVDSPwrOnSeqDIGONtoDE_in4Ms: LVDS power up sequence time in unit of 4ms, time delay from DIGON signal active to data enable signal active( DE ). + =0 mean use VBIOS default which is 8 ( 32ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. +ucLVDSPwrOnDEtoVARY_BL_in4Ms: LVDS power up sequence time in unit of 4ms., time delay from DE( data enable ) active to Vary Brightness enable signal active( VARY_BL ). + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power up sequence is as following: DIGON->DE->VARY_BL->BLON. + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffVARY_BLtoDE_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from data enable ( DE ) signal off to LCDVCC (DIGON) off. + =0 mean use VBIOS default delay which is 8 ( 32ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffDEtoDIGON_in4Ms: LVDS power down sequence time in unit of 4ms, time delay from vary brightness enable signal( VARY_BL) off to data enable ( DE ) signal off. + =0 mean use VBIOS default which is 90 ( 360ms ). The LVDS power down sequence is as following: BLON->VARY_BL->DE->DIGON + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSOffToOnDelay_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from DIGON signal off to DIGON signal active. + =0 means to use VBIOS default delay which is 125 ( 500ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOnVARY_BLtoBLON_in4Ms: LVDS power up sequence time in unit of 4ms. Time delay from VARY_BL signal on to DLON signal active. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ucLVDSPwrOffBLONtoVARY_BL_in4Ms: LVDS power down sequence time in unit of 4ms. Time delay from BLON signal off to VARY_BL signal off. + =0 means to use VBIOS default delay which is 0 ( 0ms ). + This parameter is used by VBIOS only. VBIOS will patch LVDS_InfoTable. + +ulNbpStateMemclkFreq[4]: system memory clock frequncey in unit of 10Khz in different NB pstate. + **********************************************************************************************************************/ /**************************************************************************/ @@ -4459,6 +5033,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT #define ASIC_INTERNAL_SS_ON_DP 7 #define ASIC_INTERNAL_SS_ON_DCPLL 8 #define ASIC_EXTERNAL_SS_ON_DP_CLOCK 9 +#define ASIC_INTERNAL_VCE_SS 10 typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V2 { @@ -4520,7 +5095,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_DOS_MODE_INFO_DEF 7 #define ATOM_I2C_CHANNEL_STATUS_DEF 8 #define ATOM_I2C_CHANNEL_STATUS1_DEF 9 - +#define ATOM_INTERNAL_TIMER_DEF 10 // BIOS_0_SCRATCH Definition #define ATOM_S0_CRT1_MONO 0x00000001L @@ -4648,6 +5223,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 #define ATOM_S2_DEVICE_DPMS_MASKw1 0x3FF #define ATOM_S2_FORCEDLOWPWRMODE_STATE_MASKb3 0x0C #define ATOM_S2_FORCEDLOWPWRMODE_STATE_CHANGEb3 0x10 +#define ATOM_S2_TMDS_COHERENT_MODEb3 0x10 // used by VBIOS code only, use coherent mode for TMDS/HDMI mode #define ATOM_S2_VRI_BRIGHT_ENABLEb3 0x20 #define ATOM_S2_ROTATION_STATE_MASKb3 0xC0 @@ -5038,6 +5614,23 @@ typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3 USHORT usDeviceId; // Active Device Id for this surface. If no device, set to 0. }ENABLE_GRAPH_SURFACE_PARAMETERS_V1_3; +typedef struct _ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4 +{ + USHORT usHight; // Image Hight + USHORT usWidth; // Image Width + USHORT usGraphPitch; + UCHAR ucColorDepth; + UCHAR ucPixelFormat; + UCHAR ucSurface; // Surface 1 or 2 + UCHAR ucEnable; // ATOM_ENABLE or ATOM_DISABLE + UCHAR ucModeType; + UCHAR ucReserved; +}ENABLE_GRAPH_SURFACE_PARAMETERS_V1_4; + +// ucEnable +#define ATOM_GRAPH_CONTROL_SET_PITCH 0x0f +#define ATOM_GRAPH_CONTROL_SET_DISP_START 0x10 + typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION { ENABLE_GRAPH_SURFACE_PARAMETERS sSetSurface; @@ -5057,6 +5650,58 @@ typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS USHORT usY_Size; }GET_DISPLAY_SURFACE_SIZE_PARAMETERS; +typedef struct _GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2 +{ + union{ + USHORT usX_Size; //When use as input parameter, usX_Size indicates which CRTC + USHORT usSurface; + }; + USHORT usY_Size; + USHORT usDispXStart; + USHORT usDispYStart; +}GET_DISPLAY_SURFACE_SIZE_PARAMETERS_V2; + + +typedef struct _PALETTE_DATA_CONTROL_PARAMETERS_V3 +{ + UCHAR ucLutId; + UCHAR ucAction; + USHORT usLutStartIndex; + USHORT usLutLength; + USHORT usLutOffsetInVram; +}PALETTE_DATA_CONTROL_PARAMETERS_V3; + +// ucAction: +#define PALETTE_DATA_AUTO_FILL 1 +#define PALETTE_DATA_READ 2 +#define PALETTE_DATA_WRITE 3 + + +typedef struct _INTERRUPT_SERVICE_PARAMETERS_V2 +{ + UCHAR ucInterruptId; + UCHAR ucServiceId; + UCHAR ucStatus; + UCHAR ucReserved; +}INTERRUPT_SERVICE_PARAMETER_V2; + +// ucInterruptId +#define HDP1_INTERRUPT_ID 1 +#define HDP2_INTERRUPT_ID 2 +#define HDP3_INTERRUPT_ID 3 +#define HDP4_INTERRUPT_ID 4 +#define HDP5_INTERRUPT_ID 5 +#define HDP6_INTERRUPT_ID 6 +#define SW_INTERRUPT_ID 11 + +// ucAction +#define INTERRUPT_SERVICE_GEN_SW_INT 1 +#define INTERRUPT_SERVICE_GET_STATUS 2 + + // ucStatus +#define INTERRUPT_STATUS__INT_TRIGGER 1 +#define INTERRUPT_STATUS__HPD_HIGH 2 + typedef struct _INDIRECT_IO_ACCESS { ATOM_COMMON_TABLE_HEADER sHeader; @@ -5189,7 +5834,7 @@ typedef struct _ATOM_INIT_REG_BLOCK{ #define END_OF_REG_INDEX_BLOCK 0x0ffff #define END_OF_REG_DATA_BLOCK 0x00000000 -#define ATOM_INIT_REG_MASK_FLAG 0x80 +#define ATOM_INIT_REG_MASK_FLAG 0x80 //Not used in BIOS #define CLOCK_RANGE_HIGHEST 0x00ffffff #define VALUE_DWORD SIZEOF ULONG @@ -5229,6 +5874,7 @@ typedef struct _ATOM_MC_INIT_PARAM_TABLE #define _128Mx8 0x51 #define _128Mx16 0x52 #define _256Mx8 0x61 +#define _256Mx16 0x62 #define SAMSUNG 0x1 #define INFINEON 0x2 @@ -5585,7 +6231,7 @@ typedef struct _ATOM_VRAM_MODULE_V7 ULONG ulChannelMapCfg; // mmMC_SHARED_CHREMAP USHORT usModuleSize; // Size of ATOM_VRAM_MODULE_V7 USHORT usPrivateReserved; // MC_ARB_RAMCFG (includes NOOFBANK,NOOFRANKS,NOOFROWS,NOOFCOLS) - USHORT usReserved; + USHORT usEnableChannels; // bit vector which indicate which channels are enabled UCHAR ucExtMemoryID; // Current memory module ID UCHAR ucMemoryType; // MEM_TYPE_DDR2/DDR3/GDDR3/GDDR5 UCHAR ucChannelNum; // Number of mem. channels supported in this module @@ -5597,7 +6243,8 @@ typedef struct _ATOM_VRAM_MODULE_V7 UCHAR ucNPL_RT; // Round trip delay (MC_SEQ_CAS_TIMING [28:24]:TCL=CL+NPL_RT-2). Always 2. UCHAR ucPreamble; // [7:4] Write Preamble, [3:0] Read Preamble UCHAR ucMemorySize; // Total memory size in unit of 16MB for CONFIG_MEMSIZE - bit[23:0] zeros - UCHAR ucReserved[3]; + USHORT usSEQSettingOffset; + UCHAR ucReserved; // Memory Module specific values USHORT usEMRS2Value; // EMRS2/MR2 Value. USHORT usEMRS3Value; // EMRS3/MR3 Value. @@ -5633,10 +6280,10 @@ typedef struct _ATOM_VRAM_INFO_V3 typedef struct _ATOM_VRAM_INFO_V4 { ATOM_COMMON_TABLE_HEADER sHeader; - USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting - USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting - USHORT usRerseved; - UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usRerseved; + UCHAR ucMemDQ7_0ByteRemap; // DQ line byte remap, =0: Memory Data line BYTE0, =1: BYTE1, =2: BYTE2, =3: BYTE3 ULONG ulMemDQ7_0BitRemap; // each DQ line ( 7~0) use 3bits, like: DQ0=Bit[2:0], DQ1:[5:3], ... DQ7:[23:21] UCHAR ucReservde[4]; UCHAR ucNumOfVRAMModule; @@ -5648,9 +6295,10 @@ typedef struct _ATOM_VRAM_INFO_V4 typedef struct _ATOM_VRAM_INFO_HEADER_V2_1 { ATOM_COMMON_TABLE_HEADER sHeader; - USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting - USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting - USHORT usReserved[4]; + USHORT usMemAdjustTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory vendor specific MC adjust setting + USHORT usMemClkPatchTblOffset; // offset of ATOM_INIT_REG_BLOCK structure for memory clock specific MC setting + USHORT usPerBytePresetOffset; // offset of ATOM_INIT_REG_BLOCK structure for Per Byte Offset Preset Settings + USHORT usReserved[3]; UCHAR ucNumOfVRAMModule; // indicate number of VRAM module UCHAR ucMemoryClkPatchTblVer; // version of memory AC timing register list UCHAR ucVramModuleVer; // indicate ATOM_VRAM_MODUE version @@ -5935,6 +6583,52 @@ typedef struct _ATOM_DISP_OUT_INFO_V2 ASIC_ENCODER_INFO asEncoderInfo[1]; }ATOM_DISP_OUT_INFO_V2; + +typedef struct _ATOM_DISP_CLOCK_ID { + UCHAR ucPpllId; + UCHAR ucPpllAttribute; +}ATOM_DISP_CLOCK_ID; + +// ucPpllAttribute +#define CLOCK_SOURCE_SHAREABLE 0x01 +#define CLOCK_SOURCE_DP_MODE 0x02 +#define CLOCK_SOURCE_NONE_DP_MODE 0x04 + +//DispOutInfoTable +typedef struct _ASIC_TRANSMITTER_INFO_V2 +{ + USHORT usTransmitterObjId; + USHORT usDispClkIdOffset; // point to clock source id list supported by Encoder Object + UCHAR ucTransmitterCmdTblId; + UCHAR ucConfig; + UCHAR ucEncoderID; // available 1st encoder ( default ) + UCHAR ucOptionEncoderID; // available 2nd encoder ( optional ) + UCHAR uc2ndEncoderID; + UCHAR ucReserved; +}ASIC_TRANSMITTER_INFO_V2; + +typedef struct _ATOM_DISP_OUT_INFO_V3 +{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT ptrTransmitterInfo; + USHORT ptrEncoderInfo; + USHORT ptrMainCallParserFar; // direct address of main parser call in VBIOS binary. + USHORT usReserved; + UCHAR ucDCERevision; + UCHAR ucMaxDispEngineNum; + UCHAR ucMaxActiveDispEngineNum; + UCHAR ucMaxPPLLNum; + UCHAR ucCoreRefClkSource; // value of CORE_REF_CLK_SOURCE + UCHAR ucReserved[3]; + ASIC_TRANSMITTER_INFO_V2 asTransmitterInfo[1]; // for alligment only +}ATOM_DISP_OUT_INFO_V3; + +typedef enum CORE_REF_CLK_SOURCE{ + CLOCK_SRC_XTALIN=0, + CLOCK_SRC_XO_IN=1, + CLOCK_SRC_XO_IN2=2, +}CORE_REF_CLK_SOURCE; + // DispDevicePriorityInfo typedef struct _ATOM_DISPLAY_DEVICE_PRIORITY_INFO { @@ -6070,6 +6764,39 @@ typedef struct _PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS #define HW_I2C_READ 0 #define I2C_2BYTE_ADDR 0x02 +/****************************************************************************/ +// Structures used by HW_Misc_OperationTable +/****************************************************************************/ +typedef struct _ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 +{ + UCHAR ucCmd; // Input: To tell which action to take + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1; + +typedef struct _ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1 +{ + UCHAR ucReturnCode; // Output: Return value base on action was taken + UCHAR ucReserved[3]; + ULONG ulReserved; +}ATOM_HW_MISC_OPERATION_OUTPUT_PARAMETER_V1_1; + +// Actions code +#define ATOM_GET_SDI_SUPPORT 0xF0 + +// Return code +#define ATOM_UNKNOWN_CMD 0 +#define ATOM_FEATURE_NOT_SUPPORTED 1 +#define ATOM_FEATURE_SUPPORTED 2 + +typedef struct _ATOM_HW_MISC_OPERATION_PS_ALLOCATION +{ + ATOM_HW_MISC_OPERATION_INPUT_PARAMETER_V1_1 sInput_Output; + PROCESS_I2C_CHANNEL_TRANSACTION_PARAMETERS sReserved; +}ATOM_HW_MISC_OPERATION_PS_ALLOCATION; + +/****************************************************************************/ + typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 { UCHAR ucHWBlkInst; // HW block instance, 0, 1, 2, ... @@ -6090,6 +6817,52 @@ typedef struct _SET_HWBLOCK_INSTANCE_PARAMETER_V2 #define SELECT_CRTC_PIXEL_RATE 7 #define SELECT_VGA_BLK 8 +// DIGTransmitterInfoTable structure used to program UNIPHY settings +typedef struct _DIG_TRANSMITTER_INFO_HEADER_V3_1{ + ATOM_COMMON_TABLE_HEADER sHeader; + USHORT usDPVsPreEmphSettingOffset; // offset of PHY_ANALOG_SETTING_INFO * with DP Voltage Swing and Pre-Emphasis for each Link clock + USHORT usPhyAnalogRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with None-DP mode Analog Setting's register Info + USHORT usPhyAnalogSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with None-DP mode Analog Setting for each link clock range + USHORT usPhyPllRegListOffset; // offset of CLOCK_CONDITION_REGESTER_INFO* with Phy Pll register Info + USHORT usPhyPllSettingOffset; // offset of CLOCK_CONDITION_SETTING_ENTRY* with Phy Pll Settings +}DIG_TRANSMITTER_INFO_HEADER_V3_1; + +typedef struct _CLOCK_CONDITION_REGESTER_INFO{ + USHORT usRegisterIndex; + UCHAR ucStartBit; + UCHAR ucEndBit; +}CLOCK_CONDITION_REGESTER_INFO; + +typedef struct _CLOCK_CONDITION_SETTING_ENTRY{ + USHORT usMaxClockFreq; + UCHAR ucEncodeMode; + UCHAR ucPhySel; + ULONG ulAnalogSetting[1]; +}CLOCK_CONDITION_SETTING_ENTRY; + +typedef struct _CLOCK_CONDITION_SETTING_INFO{ + USHORT usEntrySize; + CLOCK_CONDITION_SETTING_ENTRY asClkCondSettingEntry[1]; +}CLOCK_CONDITION_SETTING_INFO; + +typedef struct _PHY_CONDITION_REG_VAL{ + ULONG ulCondition; + ULONG ulRegVal; +}PHY_CONDITION_REG_VAL; + +typedef struct _PHY_CONDITION_REG_INFO{ + USHORT usRegIndex; + USHORT usSize; + PHY_CONDITION_REG_VAL asRegVal[1]; +}PHY_CONDITION_REG_INFO; + +typedef struct _PHY_ANALOG_SETTING_INFO{ + UCHAR ucEncodeMode; + UCHAR ucPhySel; + USHORT usSize; + PHY_CONDITION_REG_INFO asAnalogSetting[1]; +}PHY_ANALOG_SETTING_INFO; + /****************************************************************************/ //Portion VI: Definitinos for vbios MC scratch registers that driver used /****************************************************************************/ @@ -6497,6 +7270,8 @@ typedef struct _ATOM_PPLIB_THERMALCONTROLLER #define ATOM_PP_THERMALCONTROLLER_EMC2103 13 /* 0x0D */ // Only fan control will be implemented, do NOT show this in PPGen. #define ATOM_PP_THERMALCONTROLLER_SUMO 14 /* 0x0E */ // Sumo type, used internally #define ATOM_PP_THERMALCONTROLLER_NISLANDS 15 +#define ATOM_PP_THERMALCONTROLLER_SISLANDS 16 +#define ATOM_PP_THERMALCONTROLLER_LM96163 17 // Thermal controller 'combo type' to use an external controller for Fan control and an internal controller for thermal. // We probably should reserve the bit 0x80 for this use. @@ -6512,6 +7287,7 @@ typedef struct _ATOM_PPLIB_STATE UCHAR ucClockStateIndices[1]; // variable-sized } ATOM_PPLIB_STATE; + typedef struct _ATOM_PPLIB_FANTABLE { UCHAR ucFanTableFormat; // Change this if the table format changes or version changes so that the other fields are not the same. @@ -6524,12 +7300,20 @@ typedef struct _ATOM_PPLIB_FANTABLE USHORT usPWMHigh; // The PWM value at THigh. } ATOM_PPLIB_FANTABLE; +typedef struct _ATOM_PPLIB_FANTABLE2 +{ + ATOM_PPLIB_FANTABLE basicTable; + USHORT usTMax; // The max temperature +} ATOM_PPLIB_FANTABLE2; + typedef struct _ATOM_PPLIB_EXTENDEDHEADER { USHORT usSize; ULONG ulMaxEngineClock; // For Overdrive. ULONG ulMaxMemoryClock; // For Overdrive. // Add extra system parameters here, always adjust size to include all fields. + USHORT usVCETableOffset; //points to ATOM_PPLIB_VCE_Table + USHORT usUVDTableOffset; //points to ATOM_PPLIB_UVD_Table } ATOM_PPLIB_EXTENDEDHEADER; //// ATOM_PPLIB_POWERPLAYTABLE::ulPlatformCaps @@ -6552,6 +7336,7 @@ typedef struct _ATOM_PPLIB_EXTENDEDHEADER #define ATOM_PP_PLATFORM_CAP_REGULATOR_HOT 0x00010000 // Enable the 'regulator hot' feature. #define ATOM_PP_PLATFORM_CAP_BACO 0x00020000 // Does the driver supports BACO state. + typedef struct _ATOM_PPLIB_POWERPLAYTABLE { ATOM_COMMON_TABLE_HEADER sHeader; @@ -6610,7 +7395,8 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE4 USHORT usVddciDependencyOnMCLKOffset; USHORT usVddcDependencyOnMCLKOffset; USHORT usMaxClockVoltageOnDCOffset; - USHORT usReserved[2]; + USHORT usVddcPhaseShedLimitsTableOffset; // Points to ATOM_PPLIB_PhaseSheddingLimits_Table + USHORT usReserved; } ATOM_PPLIB_POWERPLAYTABLE4, *LPATOM_PPLIB_POWERPLAYTABLE4; typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 @@ -6620,8 +7406,9 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 ULONG ulNearTDPLimit; ULONG ulSQRampingThreshold; USHORT usCACLeakageTableOffset; // Points to ATOM_PPLIB_CAC_Leakage_Table - ULONG ulCACLeakage; // TBD, this parameter is still under discussion. Change to ulReserved if not needed. - ULONG ulReserved; + ULONG ulCACLeakage; // The iLeakage for driver calculated CAC leakage table + USHORT usTDPODLimit; + USHORT usLoadLineSlope; // in milliOhms * 100 } ATOM_PPLIB_POWERPLAYTABLE5, *LPATOM_PPLIB_POWERPLAYTABLE5; //// ATOM_PPLIB_NONCLOCK_INFO::usClassification @@ -6650,6 +7437,7 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 //// ATOM_PPLIB_NONCLOCK_INFO::usClassification2 #define ATOM_PPLIB_CLASSIFICATION2_LIMITEDPOWERSOURCE_2 0x0001 #define ATOM_PPLIB_CLASSIFICATION2_ULV 0x0002 +#define ATOM_PPLIB_CLASSIFICATION2_MVC 0x0004 //Multi-View Codec (BD-3D) //// ATOM_PPLIB_NONCLOCK_INFO::ulCapsAndSettings #define ATOM_PPLIB_SINGLE_DISPLAY_ONLY 0x00000001 @@ -6673,7 +7461,9 @@ typedef struct _ATOM_PPLIB_POWERPLAYTABLE5 #define ATOM_PPLIB_SOFTWARE_DISABLE_LOADBALANCING 0x00001000 #define ATOM_PPLIB_SOFTWARE_ENABLE_SLEEP_FOR_TIMESTAMPS 0x00002000 -#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + +#define ATOM_PPLIB_DISALLOW_ON_DC 0x00004000 + #define ATOM_PPLIB_ENABLE_VARIBRIGHT 0x00008000 //memory related flags @@ -6735,7 +7525,7 @@ typedef struct _ATOM_PPLIB_R600_CLOCK_INFO #define ATOM_PPLIB_R600_FLAGS_UVDSAFE 2 #define ATOM_PPLIB_R600_FLAGS_BACKBIASENABLE 4 #define ATOM_PPLIB_R600_FLAGS_MEMORY_ODT_OFF 8 -#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 +#define ATOM_PPLIB_R600_FLAGS_MEMORY_DLL_OFF 16 #define ATOM_PPLIB_R600_FLAGS_LOWPOWER 32 // On the RV770 use 'low power' setting (sequencer S0). typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO @@ -6754,6 +7544,24 @@ typedef struct _ATOM_PPLIB_EVERGREEN_CLOCK_INFO } ATOM_PPLIB_EVERGREEN_CLOCK_INFO; +typedef struct _ATOM_PPLIB_SI_CLOCK_INFO +{ + USHORT usEngineClockLow; + UCHAR ucEngineClockHigh; + + USHORT usMemoryClockLow; + UCHAR ucMemoryClockHigh; + + USHORT usVDDC; + USHORT usVDDCI; + UCHAR ucPCIEGen; + UCHAR ucUnused1; + + ULONG ulFlags; // ATOM_PPLIB_SI_FLAGS_*, no flag is necessary for now + +} ATOM_PPLIB_SI_CLOCK_INFO; + + typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO { @@ -6766,7 +7574,7 @@ typedef struct _ATOM_PPLIB_RS780_CLOCK_INFO UCHAR ucPadding; // For proper alignment and size. USHORT usVDDC; // For the 780, use: None, Low, High, Variable UCHAR ucMaxHTLinkWidth; // From SBIOS - {2, 4, 8, 16} - UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requirement. + UCHAR ucMinHTLinkWidth; // From SBIOS - {2, 4, 8, 16}. Effective only if CDLW enabled. Minimum down stream width could be bigger as display BW requriement. USHORT usHTLinkFreq; // See definition ATOM_PPLIB_RS780_HTLINKFREQ_xxx or in MHz(>=200). ULONG ulFlags; } ATOM_PPLIB_RS780_CLOCK_INFO; @@ -6788,9 +7596,7 @@ typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ USHORT usEngineClockLow; //clockfrequency & 0xFFFF. The unit is in 10khz UCHAR ucEngineClockHigh; //clockfrequency >> 16. UCHAR vddcIndex; //2-bit vddc index; - UCHAR leakage; //please use 8-bit absolute value, not the 6-bit % value - //please initalize to 0 - UCHAR rsv; + USHORT tdpLimit; //please initalize to 0 USHORT rsv1; //please initialize to 0s @@ -6813,7 +7619,7 @@ typedef struct _ATOM_PPLIB_STATE_V2 UCHAR clockInfoIndex[1]; } ATOM_PPLIB_STATE_V2; -typedef struct StateArray{ +typedef struct _StateArray{ //how many states we have UCHAR ucNumEntries; @@ -6821,18 +7627,17 @@ typedef struct StateArray{ }StateArray; -typedef struct ClockInfoArray{ +typedef struct _ClockInfoArray{ //how many clock levels we have UCHAR ucNumEntries; - //sizeof(ATOM_PPLIB_SUMO_CLOCK_INFO) + //sizeof(ATOM_PPLIB_CLOCK_INFO) UCHAR ucEntrySize; - //this is for Sumo - ATOM_PPLIB_SUMO_CLOCK_INFO clockInfo[1]; + UCHAR clockInfo[1]; }ClockInfoArray; -typedef struct NonClockInfoArray{ +typedef struct _NonClockInfoArray{ //how many non-clock levels we have. normally should be same as number of states UCHAR ucNumEntries; @@ -6871,6 +7676,124 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table ATOM_PPLIB_Clock_Voltage_Limit_Record entries[1]; // Dynamically allocate entries. }ATOM_PPLIB_Clock_Voltage_Limit_Table; +typedef struct _ATOM_PPLIB_CAC_Leakage_Record +{ + USHORT usVddc; // We use this field for the "fake" standardized VDDC for power calculations + ULONG ulLeakageValue; +}ATOM_PPLIB_CAC_Leakage_Record; + +typedef struct _ATOM_PPLIB_CAC_Leakage_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_CAC_Leakage_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_CAC_Leakage_Table; + +typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Record +{ + USHORT usVoltage; + USHORT usSclkLow; + UCHAR ucSclkHigh; + USHORT usMclkLow; + UCHAR ucMclkHigh; +}ATOM_PPLIB_PhaseSheddingLimits_Record; + +typedef struct _ATOM_PPLIB_PhaseSheddingLimits_Table +{ + UCHAR ucNumEntries; // Number of entries. + ATOM_PPLIB_PhaseSheddingLimits_Record entries[1]; // Dynamically allocate entries. +}ATOM_PPLIB_PhaseSheddingLimits_Table; + +typedef struct _VCEClockInfo{ + USHORT usEVClkLow; + UCHAR ucEVClkHigh; + USHORT usECClkLow; + UCHAR ucECClkHigh; +}VCEClockInfo; + +typedef struct _VCEClockInfoArray{ + UCHAR ucNumEntries; + VCEClockInfo entries[1]; +}VCEClockInfoArray; + +typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record +{ + USHORT usVoltage; + UCHAR ucVCEClockInfoIndex; +}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table +{ + UCHAR numEntries; + ATOM_PPLIB_VCE_Clock_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_VCE_State_Record +{ + UCHAR ucVCEClockInfoIndex; + UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary +}ATOM_PPLIB_VCE_State_Record; + +typedef struct _ATOM_PPLIB_VCE_State_Table +{ + UCHAR numEntries; + ATOM_PPLIB_VCE_State_Record entries[1]; +}ATOM_PPLIB_VCE_State_Table; + + +typedef struct _ATOM_PPLIB_VCE_Table +{ + UCHAR revid; +// VCEClockInfoArray array; +// ATOM_PPLIB_VCE_Clock_Voltage_Limit_Table limits; +// ATOM_PPLIB_VCE_State_Table states; +}ATOM_PPLIB_VCE_Table; + + +typedef struct _UVDClockInfo{ + USHORT usVClkLow; + UCHAR ucVClkHigh; + USHORT usDClkLow; + UCHAR ucDClkHigh; +}UVDClockInfo; + +typedef struct _UVDClockInfoArray{ + UCHAR ucNumEntries; + UVDClockInfo entries[1]; +}UVDClockInfoArray; + +typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record +{ + USHORT usVoltage; + UCHAR ucUVDClockInfoIndex; +}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record; + +typedef struct _ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table +{ + UCHAR numEntries; + ATOM_PPLIB_UVD_Clock_Voltage_Limit_Record entries[1]; +}ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table; + +typedef struct _ATOM_PPLIB_UVD_State_Record +{ + UCHAR ucUVDClockInfoIndex; + UCHAR ucClockInfoIndex; //highest 2 bits indicates memory p-states, lower 6bits indicates index to ClockInfoArrary +}ATOM_PPLIB_UVD_State_Record; + +typedef struct _ATOM_PPLIB_UVD_State_Table +{ + UCHAR numEntries; + ATOM_PPLIB_UVD_State_Record entries[1]; +}ATOM_PPLIB_UVD_State_Table; + + +typedef struct _ATOM_PPLIB_UVD_Table +{ + UCHAR revid; +// UVDClockInfoArray array; +// ATOM_PPLIB_UVD_Clock_Voltage_Limit_Table limits; +// ATOM_PPLIB_UVD_State_Table states; +}ATOM_PPLIB_UVD_Table; + /**************************************************************************/ @@ -7020,4 +7943,68 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table #pragma pack() // BIOS data must use byte aligment +// +// AMD ACPI Table +// +#pragma pack(1) + +typedef struct { + ULONG Signature; + ULONG TableLength; //Length + UCHAR Revision; + UCHAR Checksum; + UCHAR OemId[6]; + UCHAR OemTableId[8]; //UINT64 OemTableId; + ULONG OemRevision; + ULONG CreatorId; + ULONG CreatorRevision; +} AMD_ACPI_DESCRIPTION_HEADER; +/* +//EFI_ACPI_DESCRIPTION_HEADER from AcpiCommon.h +typedef struct { + UINT32 Signature; //0x0 + UINT32 Length; //0x4 + UINT8 Revision; //0x8 + UINT8 Checksum; //0x9 + UINT8 OemId[6]; //0xA + UINT64 OemTableId; //0x10 + UINT32 OemRevision; //0x18 + UINT32 CreatorId; //0x1C + UINT32 CreatorRevision; //0x20 +}EFI_ACPI_DESCRIPTION_HEADER; +*/ +typedef struct { + AMD_ACPI_DESCRIPTION_HEADER SHeader; + UCHAR TableUUID[16]; //0x24 + ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture. + ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture. + ULONG Reserved[4]; //0x3C +}UEFI_ACPI_VFCT; + +typedef struct { + ULONG PCIBus; //0x4C + ULONG PCIDevice; //0x50 + ULONG PCIFunction; //0x54 + USHORT VendorID; //0x58 + USHORT DeviceID; //0x5A + USHORT SSVID; //0x5C + USHORT SSID; //0x5E + ULONG Revision; //0x60 + ULONG ImageLength; //0x64 +}VFCT_IMAGE_HEADER; + + +typedef struct { + VFCT_IMAGE_HEADER VbiosHeader; + UCHAR VbiosContent[1]; +}GOP_VBIOS_CONTENT; + +typedef struct { + VFCT_IMAGE_HEADER Lib1Header; + UCHAR Lib1Content[1]; +}GOP_LIB1_CONTENT; + +#pragma pack() + + #endif /* _ATOMBIOS_H */ |