summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/radeon/r300_cmdbuf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/radeon/r300_cmdbuf.c')
-rw-r--r--drivers/gpu/drm/radeon/r300_cmdbuf.c117
1 files changed, 97 insertions, 20 deletions
diff --git a/drivers/gpu/drm/radeon/r300_cmdbuf.c b/drivers/gpu/drm/radeon/r300_cmdbuf.c
index 702df45320f..4b3bd6303da 100644
--- a/drivers/gpu/drm/radeon/r300_cmdbuf.c
+++ b/drivers/gpu/drm/radeon/r300_cmdbuf.c
@@ -136,6 +136,18 @@ static int r300_emit_cliprects(drm_radeon_private_t *dev_priv,
ADVANCE_RING();
}
+ /* flus cache and wait idle clean after cliprect change */
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ OUT_RING(R300_RB3D_DC_FLUSH);
+ ADVANCE_RING();
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+ ADVANCE_RING();
+ /* set flush flag */
+ dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
return 0;
}
@@ -166,13 +178,13 @@ void r300_init_reg_flags(struct drm_device *dev)
ADD_RANGE(0x21DC, 1);
ADD_RANGE(R300_VAP_UNKNOWN_221C, 1);
ADD_RANGE(R300_VAP_CLIP_X_0, 4);
- ADD_RANGE(R300_VAP_PVS_WAITIDLE, 1);
+ ADD_RANGE(R300_VAP_PVS_STATE_FLUSH_REG, 1);
ADD_RANGE(R300_VAP_UNKNOWN_2288, 1);
ADD_RANGE(R300_VAP_OUTPUT_VTX_FMT_0, 2);
ADD_RANGE(R300_VAP_PVS_CNTL_1, 3);
ADD_RANGE(R300_GB_ENABLE, 1);
ADD_RANGE(R300_GB_MSPOS0, 5);
- ADD_RANGE(R300_TX_CNTL, 1);
+ ADD_RANGE(R300_TX_INVALTAGS, 1);
ADD_RANGE(R300_TX_ENABLE, 1);
ADD_RANGE(0x4200, 4);
ADD_RANGE(0x4214, 1);
@@ -388,15 +400,28 @@ static __inline__ int r300_emit_vpu(drm_radeon_private_t *dev_priv,
if (sz * 16 > cmdbuf->bufsz)
return -EINVAL;
- BEGIN_RING(5 + sz * 4);
- /* Wait for VAP to come to senses.. */
- /* there is no need to emit it multiple times, (only once before VAP is programmed,
- but this optimization is for later */
- OUT_RING_REG(R300_VAP_PVS_WAITIDLE, 0);
+ /* VAP is very sensitive so we purge cache before we program it
+ * and we also flush its state before & after */
+ BEGIN_RING(6);
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ OUT_RING(R300_RB3D_DC_FLUSH);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+ OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+ OUT_RING(0);
+ ADVANCE_RING();
+ /* set flush flag */
+ dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
+ BEGIN_RING(3 + sz * 4);
OUT_RING_REG(R300_VAP_PVS_UPLOAD_ADDRESS, addr);
OUT_RING(CP_PACKET0_TABLE(R300_VAP_PVS_UPLOAD_DATA, sz * 4 - 1));
OUT_RING_TABLE((int *)cmdbuf->buf, sz * 4);
+ ADVANCE_RING();
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(R300_VAP_PVS_STATE_FLUSH_REG, 0));
+ OUT_RING(0);
ADVANCE_RING();
cmdbuf->buf += sz * 16;
@@ -424,6 +449,15 @@ static __inline__ int r300_emit_clear(drm_radeon_private_t *dev_priv,
OUT_RING_TABLE((int *)cmdbuf->buf, 8);
ADVANCE_RING();
+ BEGIN_RING(4);
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ OUT_RING(R300_RB3D_DC_FLUSH);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+ ADVANCE_RING();
+ /* set flush flag */
+ dev_priv->track_flush |= RADEON_FLUSH_EMITED;
+
cmdbuf->buf += 8 * 4;
cmdbuf->bufsz -= 8 * 4;
@@ -613,11 +647,19 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv,
case RADEON_CNTL_BITBLT_MULTI:
return r300_emit_bitblt_multi(dev_priv, cmdbuf);
- case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
+ case RADEON_CP_INDX_BUFFER:
+ /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */
return r300_emit_indx_buffer(dev_priv, cmdbuf);
- case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */
- case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */
- case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */
+ case RADEON_CP_3D_DRAW_IMMD_2:
+ /* triggers drawing using in-packet vertex data */
+ case RADEON_CP_3D_DRAW_VBUF_2:
+ /* triggers drawing of vertex buffers setup elsewhere */
+ case RADEON_CP_3D_DRAW_INDX_2:
+ /* triggers drawing using indices to vertex buffer */
+ /* whenever we send vertex we clear flush & purge */
+ dev_priv->track_flush &= ~(RADEON_FLUSH_EMITED |
+ RADEON_PURGE_EMITED);
+ break;
case RADEON_WAIT_FOR_IDLE:
case RADEON_CP_NOP:
/* these packets are safe */
@@ -713,17 +755,53 @@ static __inline__ int r300_emit_packet3(drm_radeon_private_t *dev_priv,
*/
static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv)
{
+ uint32_t cache_z, cache_3d, cache_2d;
RING_LOCALS;
+
+ cache_z = R300_ZC_FLUSH;
+ cache_2d = R300_RB2D_DC_FLUSH;
+ cache_3d = R300_RB3D_DC_FLUSH;
+ if (!(dev_priv->track_flush & RADEON_PURGE_EMITED)) {
+ /* we can purge, primitive where draw since last purge */
+ cache_z |= R300_ZC_FREE;
+ cache_2d |= R300_RB2D_DC_FREE;
+ cache_3d |= R300_RB3D_DC_FREE;
+ }
- BEGIN_RING(6);
- OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
- OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A);
+ /* flush & purge zbuffer */
+ BEGIN_RING(2);
OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0));
- OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE|
- R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE);
- OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0));
- OUT_RING(0x0);
+ OUT_RING(cache_z);
+ ADVANCE_RING();
+ /* flush & purge 3d */
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
+ OUT_RING(cache_3d);
+ ADVANCE_RING();
+ /* flush & purge texture */
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(R300_TX_INVALTAGS, 0));
+ OUT_RING(0);
+ ADVANCE_RING();
+ /* FIXME: is this one really needed ? */
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(R300_RB3D_AARESOLVE_CTL, 0));
+ OUT_RING(0);
+ ADVANCE_RING();
+ BEGIN_RING(2);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(RADEON_WAIT_3D_IDLECLEAN);
+ ADVANCE_RING();
+ /* flush & purge 2d through E2 as RB2D will trigger lockup */
+ BEGIN_RING(4);
+ OUT_RING(CP_PACKET0(R300_DSTCACHE_CTLSTAT, 0));
+ OUT_RING(cache_2d);
+ OUT_RING(CP_PACKET0(RADEON_WAIT_UNTIL, 0));
+ OUT_RING(RADEON_WAIT_2D_IDLECLEAN |
+ RADEON_WAIT_HOST_IDLECLEAN);
ADVANCE_RING();
+ /* set flush & purge flags */
+ dev_priv->track_flush |= RADEON_FLUSH_EMITED | RADEON_PURGE_EMITED;
}
/**
@@ -905,8 +983,7 @@ int r300_do_cp_cmdbuf(struct drm_device *dev,
DRM_DEBUG("\n");
- /* See the comment above r300_emit_begin3d for why this call must be here,
- * and what the cleanup gotos are for. */
+ /* pacify */
r300_pacify(dev_priv);
if (cmdbuf->nbox <= R300_SIMULTANEOUS_CLIPRECTS) {
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-05 08:04:44 +0000