diff options
Diffstat (limited to 'drivers/gpu/drm/radeon/radeon_atombios.c')
| -rw-r--r-- | drivers/gpu/drm/radeon/radeon_atombios.c | 73 |
1 files changed, 38 insertions, 35 deletions
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index 1573202a641..5c1cc7ad9a1 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -387,15 +387,11 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev, *line_mux = 0x90; } - /* mac rv630 */ - if ((dev->pdev->device == 0x9588) && - (dev->pdev->subsystem_vendor == 0x106b) && - (dev->pdev->subsystem_device == 0x00a6)) { - if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) && - (*connector_type == DRM_MODE_CONNECTOR_DVII)) { - *connector_type = DRM_MODE_CONNECTOR_9PinDIN; - *line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1; - } + /* mac rv630, rv730, others */ + if ((supported_device == ATOM_DEVICE_TV1_SUPPORT) && + (*connector_type == DRM_MODE_CONNECTOR_DVII)) { + *connector_type = DRM_MODE_CONNECTOR_9PinDIN; + *line_mux = CONNECTOR_7PIN_DIN_ENUM_ID1; } /* ASUS HD 3600 XT board lists the DVI port as HDMI */ @@ -1167,16 +1163,6 @@ bool radeon_atom_get_clock_info(struct drm_device *dev) p1pll->pll_out_min = 64800; else p1pll->pll_out_min = 20000; - } else if (p1pll->pll_out_min > 64800) { - /* Limiting the pll output range is a good thing generally as - * it limits the number of possible pll combinations for a given - * frequency presumably to the ones that work best on each card. - * However, certain duallink DVI monitors seem to like - * pll combinations that would be limited by this at least on - * pre-DCE 3.0 r6xx hardware. This might need to be adjusted per - * family. - */ - p1pll->pll_out_min = 64800; } p1pll->pll_in_min = @@ -1991,6 +1977,9 @@ static int radeon_atombios_parse_power_table_1_3(struct radeon_device *rdev) num_modes = power_info->info.ucNumOfPowerModeEntries; if (num_modes > ATOM_MAX_NUMBEROF_POWER_BLOCK) num_modes = ATOM_MAX_NUMBEROF_POWER_BLOCK; + rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * num_modes, GFP_KERNEL); + if (!rdev->pm.power_state) + return state_index; /* last mode is usually default, array is low to high */ for (i = 0; i < num_modes; i++) { rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; @@ -2342,6 +2331,10 @@ static int radeon_atombios_parse_power_table_4_5(struct radeon_device *rdev) power_info = (union power_info *)(mode_info->atom_context->bios + data_offset); radeon_atombios_add_pplib_thermal_controller(rdev, &power_info->pplib.sThermalController); + rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * + power_info->pplib.ucNumStates, GFP_KERNEL); + if (!rdev->pm.power_state) + return state_index; /* first mode is usually default, followed by low to high */ for (i = 0; i < power_info->pplib.ucNumStates; i++) { mode_index = 0; @@ -2422,6 +2415,10 @@ static int radeon_atombios_parse_power_table_6(struct radeon_device *rdev) non_clock_info_array = (struct NonClockInfoArray *) (mode_info->atom_context->bios + data_offset + power_info->pplib.usNonClockInfoArrayOffset); + rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state) * + state_array->ucNumEntries, GFP_KERNEL); + if (!rdev->pm.power_state) + return state_index; for (i = 0; i < state_array->ucNumEntries; i++) { mode_index = 0; power_state = (union pplib_power_state *)&state_array->states[i]; @@ -2495,19 +2492,22 @@ void radeon_atombios_get_power_modes(struct radeon_device *rdev) break; } } else { - /* add the default mode */ - rdev->pm.power_state[state_index].type = - POWER_STATE_TYPE_DEFAULT; - rdev->pm.power_state[state_index].num_clock_modes = 1; - rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; - rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; - rdev->pm.power_state[state_index].default_clock_mode = - &rdev->pm.power_state[state_index].clock_info[0]; - rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; - rdev->pm.power_state[state_index].pcie_lanes = 16; - rdev->pm.default_power_state_index = state_index; - rdev->pm.power_state[state_index].flags = 0; - state_index++; + rdev->pm.power_state = kzalloc(sizeof(struct radeon_power_state), GFP_KERNEL); + if (rdev->pm.power_state) { + /* add the default mode */ + rdev->pm.power_state[state_index].type = + POWER_STATE_TYPE_DEFAULT; + rdev->pm.power_state[state_index].num_clock_modes = 1; + rdev->pm.power_state[state_index].clock_info[0].mclk = rdev->clock.default_mclk; + rdev->pm.power_state[state_index].clock_info[0].sclk = rdev->clock.default_sclk; + rdev->pm.power_state[state_index].default_clock_mode = + &rdev->pm.power_state[state_index].clock_info[0]; + rdev->pm.power_state[state_index].clock_info[0].voltage.type = VOLTAGE_NONE; + rdev->pm.power_state[state_index].pcie_lanes = 16; + rdev->pm.default_power_state_index = state_index; + rdev->pm.power_state[state_index].flags = 0; + state_index++; + } } rdev->pm.num_power_states = state_index; @@ -2623,7 +2623,7 @@ void radeon_atom_initialize_bios_scratch_regs(struct drm_device *dev) bios_2_scratch &= ~ATOM_S2_VRI_BRIGHT_ENABLE; /* tell the bios not to handle mode switching */ - bios_6_scratch |= (ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH | ATOM_S6_ACC_MODE); + bios_6_scratch |= ATOM_S6_ACC_BLOCK_DISPLAY_SWITCH; if (rdev->family >= CHIP_R600) { WREG32(R600_BIOS_2_SCRATCH, bios_2_scratch); @@ -2674,10 +2674,13 @@ void radeon_atom_output_lock(struct drm_encoder *encoder, bool lock) else bios_6_scratch = RREG32(RADEON_BIOS_6_SCRATCH); - if (lock) + if (lock) { bios_6_scratch |= ATOM_S6_CRITICAL_STATE; - else + bios_6_scratch &= ~ATOM_S6_ACC_MODE; + } else { bios_6_scratch &= ~ATOM_S6_CRITICAL_STATE; + bios_6_scratch |= ATOM_S6_ACC_MODE; + } if (rdev->family >= CHIP_R600) WREG32(R600_BIOS_6_SCRATCH, bios_6_scratch); |