diff options
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/Kconfig | 13 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-sh_mobile.c | 121 |
2 files changed, 94 insertions, 40 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index bceafbfa726..15a9702e294 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -521,12 +521,19 @@ config I2C_PXA_SLAVE is necessary for systems where the PXA may be a target on the I2C bus. +config HAVE_S3C2410_I2C + bool + help + This will include I2C support for Samsung SoCs. If you want to + include I2C support for any machine, kindly select this in the + respective Kconfig file. + config I2C_S3C2410 tristate "S3C2410 I2C Driver" - depends on ARCH_S3C2410 || ARCH_S3C64XX + depends on HAVE_S3C2410_I2C help Say Y here to include support for I2C controller in the - Samsung S3C2410 based System-on-Chip devices. + Samsung SoCs. config I2C_S6000 tristate "S6000 I2C support" @@ -549,7 +556,7 @@ config I2C_SH7760 config I2C_SH_MOBILE tristate "SuperH Mobile I2C Controller" - depends on SUPERH + depends on SUPERH || ARCH_SHMOBILE help If you say yes to this option, support will be included for the built-in I2C interface on the Renesas SH-Mobile processor. diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index ffb405d7c6f..598c49acaeb 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -119,8 +119,10 @@ struct sh_mobile_i2c_data { struct i2c_adapter adap; struct clk *clk; + u_int8_t icic; u_int8_t iccl; u_int8_t icch; + u_int8_t flags; spinlock_t lock; wait_queue_head_t wait; @@ -129,15 +131,17 @@ struct sh_mobile_i2c_data { int sr; }; +#define IIC_FLAG_HAS_ICIC67 (1 << 0) + #define NORMAL_SPEED 100000 /* FAST_SPEED 400000 */ /* Register offsets */ -#define ICDR(pd) (pd->reg + 0x00) -#define ICCR(pd) (pd->reg + 0x04) -#define ICSR(pd) (pd->reg + 0x08) -#define ICIC(pd) (pd->reg + 0x0c) -#define ICCL(pd) (pd->reg + 0x10) -#define ICCH(pd) (pd->reg + 0x14) +#define ICDR 0x00 +#define ICCR 0x04 +#define ICSR 0x08 +#define ICIC 0x0c +#define ICCL 0x10 +#define ICCH 0x14 /* Register bits */ #define ICCR_ICE 0x80 @@ -155,11 +159,32 @@ struct sh_mobile_i2c_data { #define ICSR_WAIT 0x02 #define ICSR_DTE 0x01 +#define ICIC_ICCLB8 0x80 +#define ICIC_ICCHB8 0x40 #define ICIC_ALE 0x08 #define ICIC_TACKE 0x04 #define ICIC_WAITE 0x02 #define ICIC_DTEE 0x01 +static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data) +{ + if (offs == ICIC) + data |= pd->icic; + + iowrite8(data, pd->reg + offs); +} + +static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs) +{ + return ioread8(pd->reg + offs); +} + +static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs, + unsigned char set, unsigned char clr) +{ + iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr); +} + static void activate_ch(struct sh_mobile_i2c_data *pd) { unsigned long i2c_clk; @@ -187,6 +212,14 @@ static void activate_ch(struct sh_mobile_i2c_data *pd) else pd->iccl = (u_int8_t)(num/denom); + /* one more bit of ICCL in ICIC */ + if (pd->flags & IIC_FLAG_HAS_ICIC67) { + if ((num/denom) > 0xff) + pd->icic |= ICIC_ICCLB8; + else + pd->icic &= ~ICIC_ICCLB8; + } + /* Calculate the value for icch. From the data sheet: icch = (p clock / transfer rate) * (H / (L + H)) */ num = i2c_clk * 4; @@ -196,25 +229,33 @@ static void activate_ch(struct sh_mobile_i2c_data *pd) else pd->icch = (u_int8_t)(num/denom); + /* one more bit of ICCH in ICIC */ + if (pd->flags & IIC_FLAG_HAS_ICIC67) { + if ((num/denom) > 0xff) + pd->icic |= ICIC_ICCHB8; + else + pd->icic &= ~ICIC_ICCHB8; + } + /* Enable channel and configure rx ack */ - iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd)); + iic_set_clr(pd, ICCR, ICCR_ICE, 0); /* Mask all interrupts */ - iowrite8(0, ICIC(pd)); + iic_wr(pd, ICIC, 0); /* Set the clock */ - iowrite8(pd->iccl, ICCL(pd)); - iowrite8(pd->icch, ICCH(pd)); + iic_wr(pd, ICCL, pd->iccl); + iic_wr(pd, ICCH, pd->icch); } static void deactivate_ch(struct sh_mobile_i2c_data *pd) { /* Clear/disable interrupts */ - iowrite8(0, ICSR(pd)); - iowrite8(0, ICIC(pd)); + iic_wr(pd, ICSR, 0); + iic_wr(pd, ICIC, 0); /* Disable channel */ - iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); + iic_set_clr(pd, ICCR, 0, ICCR_ICE); /* Disable clock and mark device as idle */ clk_disable(pd->clk); @@ -233,35 +274,35 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, switch (op) { case OP_START: /* issue start and trigger DTE interrupt */ - iowrite8(0x94, ICCR(pd)); + iic_wr(pd, ICCR, 0x94); break; case OP_TX_FIRST: /* disable DTE interrupt and write data */ - iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE, ICIC(pd)); - iowrite8(data, ICDR(pd)); + iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + iic_wr(pd, ICDR, data); break; case OP_TX: /* write data */ - iowrite8(data, ICDR(pd)); + iic_wr(pd, ICDR, data); break; case OP_TX_STOP: /* write data and issue a stop afterwards */ - iowrite8(data, ICDR(pd)); - iowrite8(0x90, ICCR(pd)); + iic_wr(pd, ICDR, data); + iic_wr(pd, ICCR, 0x90); break; case OP_TX_TO_RX: /* select read mode */ - iowrite8(0x81, ICCR(pd)); + iic_wr(pd, ICCR, 0x81); break; case OP_RX: /* just read data */ - ret = ioread8(ICDR(pd)); + ret = iic_rd(pd, ICDR); break; case OP_RX_STOP: /* enable DTE interrupt, issue stop */ - iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, - ICIC(pd)); - iowrite8(0xc0, ICCR(pd)); + iic_wr(pd, ICIC, + ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + iic_wr(pd, ICCR, 0xc0); break; case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */ - iowrite8(ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE, - ICIC(pd)); - ret = ioread8(ICDR(pd)); - iowrite8(0xc0, ICCR(pd)); + iic_wr(pd, ICIC, + ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); + ret = iic_rd(pd, ICDR); + iic_wr(pd, ICCR, 0xc0); break; } @@ -367,7 +408,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) unsigned char sr; int wakeup; - sr = ioread8(ICSR(pd)); + sr = iic_rd(pd, ICSR); pd->sr |= sr; /* remember state */ dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr, @@ -376,7 +417,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) if (sr & (ICSR_AL | ICSR_TACK)) { /* don't interrupt transaction - continue to issue stop */ - iowrite8(sr & ~(ICSR_AL | ICSR_TACK), ICSR(pd)); + iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK)); wakeup = 0; } else if (pd->msg->flags & I2C_M_RD) wakeup = sh_mobile_i2c_isr_rx(pd); @@ -384,7 +425,7 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) wakeup = sh_mobile_i2c_isr_tx(pd); if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */ - iowrite8(sr & ~ICSR_WAIT, ICSR(pd)); + iic_wr(pd, ICSR, sr & ~ICSR_WAIT); if (wakeup) { pd->sr |= SW_DONE; @@ -402,21 +443,21 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) } /* Initialize channel registers */ - iowrite8(ioread8(ICCR(pd)) & ~ICCR_ICE, ICCR(pd)); + iic_set_clr(pd, ICCR, 0, ICCR_ICE); /* Enable channel and configure rx ack */ - iowrite8(ioread8(ICCR(pd)) | ICCR_ICE, ICCR(pd)); + iic_set_clr(pd, ICCR, ICCR_ICE, 0); /* Set the clock */ - iowrite8(pd->iccl, ICCL(pd)); - iowrite8(pd->icch, ICCH(pd)); + iic_wr(pd, ICCL, pd->iccl); + iic_wr(pd, ICCH, pd->icch); pd->msg = usr_msg; pd->pos = -1; pd->sr = 0; /* Enable all interrupts to begin with */ - iowrite8(ICIC_WAITE | ICIC_ALE | ICIC_TACKE | ICIC_DTEE, ICIC(pd)); + iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE); return 0; } @@ -451,7 +492,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, retry_count = 1000; again: - val = ioread8(ICSR(pd)); + val = iic_rd(pd, ICSR); dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr); @@ -576,6 +617,12 @@ static int sh_mobile_i2c_probe(struct platform_device *dev) goto err_irq; } + /* The IIC blocks on SH-Mobile ARM processors + * come with two new bits in ICIC. + */ + if (size > 0x17) + pd->flags |= IIC_FLAG_HAS_ICIC67; + /* Enable Runtime PM for this device. * * Also tell the Runtime PM core to ignore children |