diff options
Diffstat (limited to 'drivers/ide/gayle.c')
| -rw-r--r-- | drivers/ide/gayle.c | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/drivers/ide/gayle.c b/drivers/ide/gayle.c new file mode 100644 index 00000000000..69150688656 --- /dev/null +++ b/drivers/ide/gayle.c @@ -0,0 +1,190 @@ +/* + * Amiga Gayle IDE Driver + * + * Created 9 Jul 1997 by Geert Uytterhoeven + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/blkdev.h> +#include <linux/ide.h> +#include <linux/init.h> +#include <linux/zorro.h> +#include <linux/module.h> + +#include <asm/setup.h> +#include <asm/amigahw.h> +#include <asm/amigaints.h> +#include <asm/amigayle.h> + + + /* + * Bases of the IDE interfaces + */ + +#define GAYLE_BASE_4000 0xdd2020 /* A4000/A4000T */ +#define GAYLE_BASE_1200 0xda0000 /* A1200/A600 and E-Matrix 530 */ + +#define GAYLE_IDEREG_SIZE 0x2000 + + /* + * Offsets from one of the above bases + */ + +#define GAYLE_CONTROL 0x101a + + /* + * These are at different offsets from the base + */ + +#define GAYLE_IRQ_4000 0xdd3020 /* MSB = 1, Harddisk is source of */ +#define GAYLE_IRQ_1200 0xda9000 /* interrupt */ + + + /* + * Offset of the secondary port for IDE doublers + * Note that GAYLE_CONTROL is NOT available then! + */ + +#define GAYLE_NEXT_PORT 0x1000 + +#ifndef CONFIG_BLK_DEV_IDEDOUBLER +#define GAYLE_NUM_HWIFS 1 +#define GAYLE_NUM_PROBE_HWIFS GAYLE_NUM_HWIFS +#define GAYLE_HAS_CONTROL_REG 1 +#else /* CONFIG_BLK_DEV_IDEDOUBLER */ +#define GAYLE_NUM_HWIFS 2 +#define GAYLE_NUM_PROBE_HWIFS (ide_doubler ? GAYLE_NUM_HWIFS : \ + GAYLE_NUM_HWIFS-1) +#define GAYLE_HAS_CONTROL_REG (!ide_doubler) + +static int ide_doubler; +module_param_named(doubler, ide_doubler, bool, 0); +MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); +#endif /* CONFIG_BLK_DEV_IDEDOUBLER */ + + + /* + * Check and acknowledge the interrupt status + */ + +static int gayle_ack_intr_a4000(ide_hwif_t *hwif) +{ + unsigned char ch; + + ch = z_readb(hwif->io_ports.irq_addr); + if (!(ch & GAYLE_IRQ_IDE)) + return 0; + return 1; +} + +static int gayle_ack_intr_a1200(ide_hwif_t *hwif) +{ + unsigned char ch; + + ch = z_readb(hwif->io_ports.irq_addr); + if (!(ch & GAYLE_IRQ_IDE)) + return 0; + (void)z_readb(hwif->io_ports.status_addr); + z_writeb(0x7c, hwif->io_ports.irq_addr); + return 1; +} + +static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, + unsigned long ctl, unsigned long irq_port, + ide_ack_intr_t *ack_intr) +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + hw->io_ports.data_addr = base; + + for (i = 1; i < 8; i++) + hw->io_ports_array[i] = base + 2 + i * 4; + + hw->io_ports.ctl_addr = ctl; + hw->io_ports.irq_addr = irq_port; + + hw->irq = IRQ_AMIGA_PORTS; + hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; +} + + /* + * Probe for a Gayle IDE interface (and optionally for an IDE doubler) + */ + +static int __init gayle_init(void) +{ + unsigned long phys_base, res_start, res_n; + unsigned long base, ctrlport, irqport; + ide_ack_intr_t *ack_intr; + int a4000, i, rc; + hw_regs_t hw[GAYLE_NUM_HWIFS], *hws[] = { NULL, NULL, NULL, NULL }; + + if (!MACH_IS_AMIGA) + return -ENODEV; + + if ((a4000 = AMIGAHW_PRESENT(A4000_IDE)) || AMIGAHW_PRESENT(A1200_IDE)) + goto found; + +#ifdef CONFIG_ZORRO + if (zorro_find_device(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE, + NULL)) + goto found; +#endif + return -ENODEV; + +found: + printk(KERN_INFO "ide: Gayle IDE controller (A%d style%s)\n", + a4000 ? 4000 : 1200, +#ifdef CONFIG_BLK_DEV_IDEDOUBLER + ide_doubler ? ", IDE doubler" : +#endif + ""); + + if (a4000) { + phys_base = GAYLE_BASE_4000; + irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_4000); + ack_intr = gayle_ack_intr_a4000; + } else { + phys_base = GAYLE_BASE_1200; + irqport = (unsigned long)ZTWO_VADDR(GAYLE_IRQ_1200); + ack_intr = gayle_ack_intr_a1200; + } +/* + * FIXME: we now have selectable modes between mmio v/s iomio + */ + + res_start = ((unsigned long)phys_base) & ~(GAYLE_NEXT_PORT-1); + res_n = GAYLE_IDEREG_SIZE; + + if (!request_mem_region(res_start, res_n, "IDE")) + return -EBUSY; + + for (i = 0; i < GAYLE_NUM_PROBE_HWIFS; i++) { + base = (unsigned long)ZTWO_VADDR(phys_base + i * GAYLE_NEXT_PORT); + ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; + + gayle_setup_ports(&hw[i], base, ctrlport, irqport, ack_intr); + + hws[i] = &hw[i]; + } + + rc = ide_host_add(NULL, hws, NULL); + if (rc) + release_mem_region(res_start, res_n); + + return rc; +} + +module_init(gayle_init); + +MODULE_LICENSE("GPL"); |