diff options
Diffstat (limited to 'drivers/ieee1394/pcilynx.c')
| -rw-r--r-- | drivers/ieee1394/pcilynx.c | 391 |
1 files changed, 1 insertions, 390 deletions
diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index a261d2b0e5a..2689d938276 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -834,327 +834,6 @@ static int lynx_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) * IEEE-1394 functionality section END * ***************************************/ -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS -/* VFS functions for local bus / aux device access. Access to those - * is implemented as a character device instead of block devices - * because buffers are not wanted for this. Therefore llseek (from - * VFS) can be used for these char devices with obvious effects. - */ -static int mem_open(struct inode*, struct file*); -static int mem_release(struct inode*, struct file*); -static unsigned int aux_poll(struct file*, struct poll_table_struct*); -static loff_t mem_llseek(struct file*, loff_t, int); -static ssize_t mem_read (struct file*, char*, size_t, loff_t*); -static ssize_t mem_write(struct file*, const char*, size_t, loff_t*); - - -static struct file_operations aux_ops = { - .owner = THIS_MODULE, - .read = mem_read, - .write = mem_write, - .poll = aux_poll, - .llseek = mem_llseek, - .open = mem_open, - .release = mem_release, -}; - - -static void aux_setup_pcls(struct ti_lynx *lynx) -{ - struct ti_pcl pcl; - - pcl.next = PCL_NEXT_INVALID; - pcl.user_data = pcl_bus(lynx, lynx->dmem_pcl); - put_pcl(lynx, lynx->dmem_pcl, &pcl); -} - -static int mem_open(struct inode *inode, struct file *file) -{ - int cid = iminor(inode); - enum { t_rom, t_aux, t_ram } type; - struct memdata *md; - - if (cid < PCILYNX_MINOR_AUX_START) { - /* just for completeness */ - return -ENXIO; - } else if (cid < PCILYNX_MINOR_ROM_START) { - cid -= PCILYNX_MINOR_AUX_START; - if (cid >= num_of_cards || !cards[cid].aux_port) - return -ENXIO; - type = t_aux; - } else if (cid < PCILYNX_MINOR_RAM_START) { - cid -= PCILYNX_MINOR_ROM_START; - if (cid >= num_of_cards || !cards[cid].local_rom) - return -ENXIO; - type = t_rom; - } else { - /* WARNING: Know what you are doing when opening RAM. - * It is currently used inside the driver! */ - cid -= PCILYNX_MINOR_RAM_START; - if (cid >= num_of_cards || !cards[cid].local_ram) - return -ENXIO; - type = t_ram; - } - - md = (struct memdata *)kmalloc(sizeof(struct memdata), SLAB_KERNEL); - if (md == NULL) - return -ENOMEM; - - md->lynx = &cards[cid]; - md->cid = cid; - - switch (type) { - case t_rom: - md->type = rom; - break; - case t_ram: - md->type = ram; - break; - case t_aux: - atomic_set(&md->aux_intr_last_seen, - atomic_read(&cards[cid].aux_intr_seen)); - md->type = aux; - break; - } - - file->private_data = md; - - return 0; -} - -static int mem_release(struct inode *inode, struct file *file) -{ - kfree(file->private_data); - return 0; -} - -static unsigned int aux_poll(struct file *file, poll_table *pt) -{ - struct memdata *md = (struct memdata *)file->private_data; - int cid = md->cid; - unsigned int mask; - - /* reading and writing is always allowed */ - mask = POLLIN | POLLRDNORM | POLLOUT | POLLWRNORM; - - if (md->type == aux) { - poll_wait(file, &cards[cid].aux_intr_wait, pt); - - if (atomic_read(&md->aux_intr_last_seen) - != atomic_read(&cards[cid].aux_intr_seen)) { - mask |= POLLPRI; - atomic_inc(&md->aux_intr_last_seen); - } - } - - return mask; -} - -loff_t mem_llseek(struct file *file, loff_t offs, int orig) -{ - loff_t newoffs; - - switch (orig) { - case 0: - newoffs = offs; - break; - case 1: - newoffs = offs + file->f_pos; - break; - case 2: - newoffs = PCILYNX_MAX_MEMORY + 1 + offs; - break; - default: - return -EINVAL; - } - - if (newoffs < 0 || newoffs > PCILYNX_MAX_MEMORY + 1) return -EINVAL; - - file->f_pos = newoffs; - return newoffs; -} - -/* - * do not DMA if count is too small because this will have a serious impact - * on performance - the value 2400 was found by experiment and may not work - * everywhere as good as here - use mem_mindma option for modules to change - */ -static short mem_mindma = 2400; -module_param(mem_mindma, short, 0444); -MODULE_PARM_DESC(mem_mindma, "Minimum amount of data required to use DMA"); - -static ssize_t mem_dmaread(struct memdata *md, u32 physbuf, ssize_t count, - int offset) -{ - pcltmp_t pcltmp; - struct ti_pcl *pcl; - size_t retval; - int i; - DECLARE_WAITQUEUE(wait, current); - - count &= ~3; - count = min(count, 53196); - retval = count; - - if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - PRINT(KERN_WARNING, md->lynx->id, "DMA ALREADY ACTIVE!"); - } - - reg_write(md->lynx, LBUS_ADDR, md->type | offset); - - pcl = edit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp); - pcl->buffer[0].control = PCL_CMD_LBUS_TO_PCI | min(count, 4092); - pcl->buffer[0].pointer = physbuf; - count -= 4092; - - i = 0; - while (count > 0) { - i++; - pcl->buffer[i].control = min(count, 4092); - pcl->buffer[i].pointer = physbuf + i * 4092; - count -= 4092; - } - pcl->buffer[i].control |= PCL_LAST_BUFF; - commit_pcl(md->lynx, md->lynx->dmem_pcl, &pcltmp); - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&md->lynx->mem_dma_intr_wait, &wait); - run_sub_pcl(md->lynx, md->lynx->dmem_pcl, 2, CHANNEL_LOCALBUS); - - schedule(); - while (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - if (signal_pending(current)) { - retval = -EINTR; - break; - } - schedule(); - } - - reg_write(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS), 0); - remove_wait_queue(&md->lynx->mem_dma_intr_wait, &wait); - - if (reg_read(md->lynx, DMA_CHAN_CTRL(CHANNEL_LOCALBUS)) - & DMA_CHAN_CTRL_BUSY) { - PRINT(KERN_ERR, md->lynx->id, "DMA STILL ACTIVE!"); - } - - return retval; -} - -static ssize_t mem_read(struct file *file, char *buffer, size_t count, - loff_t *offset) -{ - struct memdata *md = (struct memdata *)file->private_data; - ssize_t bcount; - size_t alignfix; - loff_t off = *offset; /* avoid useless 64bit-arithmetic */ - ssize_t retval; - void *membase; - - if ((off + count) > PCILYNX_MAX_MEMORY+1) { - count = PCILYNX_MAX_MEMORY+1 - off; - } - if (count == 0 || off > PCILYNX_MAX_MEMORY) { - return -ENOSPC; - } - - switch (md->type) { - case rom: - membase = md->lynx->local_rom; - break; - case ram: - membase = md->lynx->local_ram; - break; - case aux: - membase = md->lynx->aux_port; - break; - default: - panic("pcilynx%d: unsupported md->type %d in %s", - md->lynx->id, md->type, __FUNCTION__); - } - - down(&md->lynx->mem_dma_mutex); - - if (count < mem_mindma) { - memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, count); - goto out; - } - - bcount = count; - alignfix = 4 - (off % 4); - if (alignfix != 4) { - if (bcount < alignfix) { - alignfix = bcount; - } - memcpy_fromio(md->lynx->mem_dma_buffer, membase+off, - alignfix); - if (bcount == alignfix) { - goto out; - } - bcount -= alignfix; - off += alignfix; - } - - while (bcount >= 4) { - retval = mem_dmaread(md, md->lynx->mem_dma_buffer_dma - + count - bcount, bcount, off); - if (retval < 0) return retval; - - bcount -= retval; - off += retval; - } - - if (bcount) { - memcpy_fromio(md->lynx->mem_dma_buffer + count - bcount, - membase+off, bcount); - } - - out: - retval = copy_to_user(buffer, md->lynx->mem_dma_buffer, count); - up(&md->lynx->mem_dma_mutex); - - if (retval) return -EFAULT; - *offset += count; - return count; -} - - -static ssize_t mem_write(struct file *file, const char *buffer, size_t count, - loff_t *offset) -{ - struct memdata *md = (struct memdata *)file->private_data; - - if (((*offset) + count) > PCILYNX_MAX_MEMORY+1) { - count = PCILYNX_MAX_MEMORY+1 - *offset; - } - if (count == 0 || *offset > PCILYNX_MAX_MEMORY) { - return -ENOSPC; - } - - /* FIXME: dereferencing pointers to PCI mem doesn't work everywhere */ - switch (md->type) { - case aux: - if (copy_from_user(md->lynx->aux_port+(*offset), buffer, count)) - return -EFAULT; - break; - case ram: - if (copy_from_user(md->lynx->local_ram+(*offset), buffer, count)) - return -EFAULT; - break; - case rom: - /* the ROM may be writeable */ - if (copy_from_user(md->lynx->local_rom+(*offset), buffer, count)) - return -EFAULT; - break; - } - - file->f_pos += count; - return count; -} -#endif /* CONFIG_IEEE1394_PCILYNX_PORTS */ - /******************************************************** * Global stuff (interrupt handler, init/shutdown code) * @@ -1181,18 +860,6 @@ static irqreturn_t lynx_irq_handler(int irq, void *dev_id, reg_write(lynx, LINK_INT_STATUS, linkint); reg_write(lynx, PCI_INT_STATUS, intmask); -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (intmask & PCI_INT_AUX_INT) { - atomic_inc(&lynx->aux_intr_seen); - wake_up_interruptible(&lynx->aux_intr_wait); - } - - if (intmask & PCI_INT_DMA_HLT(CHANNEL_LOCALBUS)) { - wake_up_interruptible(&lynx->mem_dma_intr_wait); - } -#endif - - if (intmask & PCI_INT_1394) { if (linkint & LINK_INT_PHY_TIMEOUT) { PRINT(KERN_INFO, lynx->id, "PHY timeout occurred"); @@ -1484,15 +1151,9 @@ static void remove_card(struct pci_dev *dev) pci_free_consistent(lynx->dev, PAGE_SIZE, lynx->rcv_page, lynx->rcv_page_dma); case have_aux_buf: -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - pci_free_consistent(lynx->dev, 65536, lynx->mem_dma_buffer, - lynx->mem_dma_buffer_dma); -#endif case have_pcl_mem: -#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM pci_free_consistent(lynx->dev, LOCALRAM_SIZE, lynx->pcl_mem, lynx->pcl_mem_dma); -#endif case clear: /* do nothing - already freed */ ; @@ -1546,7 +1207,6 @@ static int __devinit add_card(struct pci_dev *dev, spin_lock_init(&lynx->lock); spin_lock_init(&lynx->phy_reg_lock); -#ifndef CONFIG_IEEE1394_PCILYNX_LOCALRAM lynx->pcl_mem = pci_alloc_consistent(dev, LOCALRAM_SIZE, &lynx->pcl_mem_dma); @@ -1558,16 +1218,6 @@ static int __devinit add_card(struct pci_dev *dev, } else { FAIL("failed to allocate PCL memory area"); } -#endif - -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - lynx->mem_dma_buffer = pci_alloc_consistent(dev, 65536, - &lynx->mem_dma_buffer_dma); - if (lynx->mem_dma_buffer == NULL) { - FAIL("failed to allocate DMA buffer for aux"); - } - lynx->state = have_aux_buf; -#endif lynx->rcv_page = pci_alloc_consistent(dev, PAGE_SIZE, &lynx->rcv_page_dma); @@ -1597,13 +1247,6 @@ static int __devinit add_card(struct pci_dev *dev, FAIL("failed to remap registers - card not accessible"); } -#ifdef CONFIG_IEEE1394_PCILYNX_LOCALRAM - if (lynx->local_ram == NULL) { - FAIL("failed to remap local RAM which is required for " - "operation"); - } -#endif - reg_set_bits(lynx, MISC_CONTROL, MISC_CONTROL_SWRESET); /* Fix buggy cards with autoboot pin not tied low: */ reg_write(lynx, DMA0_CHAN_CTRL, 0); @@ -1624,13 +1267,6 @@ static int __devinit add_card(struct pci_dev *dev, /* alloc_pcl return values are not checked, it is expected that the * provided PCL space is sufficient for the initial allocations */ -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (lynx->aux_port != NULL) { - lynx->dmem_pcl = alloc_pcl(lynx); - aux_setup_pcls(lynx); - sema_init(&lynx->mem_dma_mutex, 1); - } -#endif lynx->rcv_pcl = alloc_pcl(lynx); lynx->rcv_pcl_start = alloc_pcl(lynx); lynx->async.pcl = alloc_pcl(lynx); @@ -1647,12 +1283,6 @@ static int __devinit add_card(struct pci_dev *dev, reg_write(lynx, PCI_INT_ENABLE, PCI_INT_DMA_ALL); -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - reg_set_bits(lynx, PCI_INT_ENABLE, PCI_INT_AUX_INT); - init_waitqueue_head(&lynx->mem_dma_intr_wait); - init_waitqueue_head(&lynx->aux_intr_wait); -#endif - tasklet_init(&lynx->iso_rcv.tq, (void (*)(unsigned long))iso_rcv_bh, (unsigned long)lynx); @@ -1944,37 +1574,18 @@ static int __init pcilynx_init(void) { int ret; -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - if (register_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME, &aux_ops)) { - PRINT_G(KERN_ERR, "allocation of char major number %d failed", - PCILYNX_MAJOR); - return -EBUSY; - } -#endif - ret = pci_register_driver(&lynx_pci_driver); if (ret < 0) { PRINT_G(KERN_ERR, "PCI module init failed"); - goto free_char_dev; + return ret; } return 0; - - free_char_dev: -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME); -#endif - - return ret; } static void __exit pcilynx_cleanup(void) { pci_unregister_driver(&lynx_pci_driver); - -#ifdef CONFIG_IEEE1394_PCILYNX_PORTS - unregister_chrdev(PCILYNX_MAJOR, PCILYNX_DRIVER_NAME); -#endif } |