diff options
Diffstat (limited to 'drivers/input/mouse/alps.c')
-rw-r--r-- | drivers/input/mouse/alps.c | 185 |
1 files changed, 115 insertions, 70 deletions
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index bf2fa51853e..7b99fc7c943 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -29,6 +29,9 @@ */ #define ALPS_CMD_NIBBLE_10 0x01f2 +#define ALPS_REG_BASE_RUSHMORE 0xc2c0 +#define ALPS_REG_BASE_PINNACLE 0x0000 + static const struct alps_nibble_commands alps_v3_nibble_commands[] = { { PSMOUSE_CMD_SETPOLL, 0x00 }, /* 0 */ { PSMOUSE_CMD_RESET_DIS, 0x00 }, /* 1 */ @@ -1166,26 +1169,31 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse) } /* - * Enable or disable passthrough mode to the trackstick. Must be in - * command mode when calling this function. + * Enable or disable passthrough mode to the trackstick. */ -static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable) +static int alps_passthrough_mode_v3(struct psmouse *psmouse, + int reg_base, bool enable) { - int reg_val; + int reg_val, ret = -1; - reg_val = alps_command_mode_read_reg(psmouse, 0x0008); - if (reg_val == -1) + if (alps_enter_command_mode(psmouse, NULL)) return -1; + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x0008); + if (reg_val == -1) + goto error; + if (enable) reg_val |= 0x01; else reg_val &= ~0x01; - if (__alps_command_mode_write_reg(psmouse, reg_val)) - return -1; + ret = __alps_command_mode_write_reg(psmouse, reg_val); - return 0; +error: + if (alps_exit_command_mode(psmouse)) + ret = -1; + return ret; } /* Must be in command mode when calling this function */ @@ -1204,69 +1212,102 @@ static int alps_absolute_mode_v3(struct psmouse *psmouse) return 0; } -static int alps_hw_init_v3(struct psmouse *psmouse) +static int alps_probe_trackstick_v3(struct psmouse *psmouse, int reg_base) { - struct ps2dev *ps2dev = &psmouse->ps2dev; - int reg_val; - unsigned char param[4]; + int ret = -EIO, reg_val; if (alps_enter_command_mode(psmouse, NULL)) goto error; - /* Check for trackstick */ - reg_val = alps_command_mode_read_reg(psmouse, 0x0008); + reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08); if (reg_val == -1) goto error; - if (reg_val & 0x80) { - if (alps_passthrough_mode_v3(psmouse, true)) - goto error; - if (alps_exit_command_mode(psmouse)) - goto error; + + /* bit 7: trackstick is present */ + ret = reg_val & 0x80 ? 0 : -ENODEV; + +error: + alps_exit_command_mode(psmouse); + return ret; +} + +static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int ret = 0; + unsigned char param[4]; + + if (alps_passthrough_mode_v3(psmouse, reg_base, true)) + return -EIO; + + /* + * E7 report for the trackstick + * + * There have been reports of failures to seem to trace back + * to the above trackstick check failing. When these occur + * this E7 report fails, so when that happens we continue + * with the assumption that there isn't a trackstick after + * all. + */ + if (alps_rpt_cmd(psmouse, 0, PSMOUSE_CMD_SETSCALE21, param)) { + psmouse_warn(psmouse, "trackstick E7 report failed\n"); + ret = -ENODEV; + } else { + psmouse_dbg(psmouse, + "trackstick E7 report: %2.2x %2.2x %2.2x\n", + param[0], param[1], param[2]); /* - * E7 report for the trackstick - * - * There have been reports of failures to seem to trace back - * to the above trackstick check failing. When these occur - * this E7 report fails, so when that happens we continue - * with the assumption that there isn't a trackstick after - * all. + * Not sure what this does, but it is absolutely + * essential. Without it, the touchpad does not + * work at all and the trackstick just emits normal + * PS/2 packets. */ - param[0] = 0x64; - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) || - ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) { - psmouse_warn(psmouse, "trackstick E7 report failed\n"); - } else { - psmouse_dbg(psmouse, - "trackstick E7 report: %2.2x %2.2x %2.2x\n", - param[0], param[1], param[2]); - - /* - * Not sure what this does, but it is absolutely - * essential. Without it, the touchpad does not - * work at all and the trackstick just emits normal - * PS/2 packets. - */ - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || - ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || - alps_command_mode_send_nibble(psmouse, 0x9) || - alps_command_mode_send_nibble(psmouse, 0x4)) { - psmouse_err(psmouse, - "Error sending magic E6 sequence\n"); - goto error_passthrough; - } + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) || + alps_command_mode_send_nibble(psmouse, 0x9) || + alps_command_mode_send_nibble(psmouse, 0x4)) { + psmouse_err(psmouse, + "Error sending magic E6 sequence\n"); + ret = -EIO; + goto error; } - if (alps_enter_command_mode(psmouse, NULL)) - goto error_passthrough; - if (alps_passthrough_mode_v3(psmouse, false)) - goto error; + /* + * This ensures the trackstick packets are in the format + * supported by this driver. If bit 1 isn't set the packet + * format is different. + */ + if (alps_enter_command_mode(psmouse, NULL) || + alps_command_mode_write_reg(psmouse, + reg_base + 0x08, 0x82) || + alps_exit_command_mode(psmouse)) + ret = -EIO; } - if (alps_absolute_mode_v3(psmouse)) { +error: + if (alps_passthrough_mode_v3(psmouse, reg_base, false)) + ret = -EIO; + + return ret; +} + +static int alps_hw_init_v3(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + int reg_val; + unsigned char param[4]; + + reg_val = alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE); + if (reg_val == -EIO) + goto error; + if (reg_val == 0 && + alps_setup_trackstick_v3(psmouse, ALPS_REG_BASE_PINNACLE) == -EIO) + goto error; + + if (alps_enter_command_mode(psmouse, NULL) || + alps_absolute_mode_v3(psmouse)) { psmouse_err(psmouse, "Failed to enter absolute mode\n"); goto error; } @@ -1303,14 +1344,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse) if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04)) goto error; - /* - * This ensures the trackstick packets are in the format - * supported by this driver. If bit 1 isn't set the packet - * format is different. - */ - if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82)) - goto error; - alps_exit_command_mode(psmouse); /* Set rate and enable data reporting */ @@ -1323,10 +1356,6 @@ static int alps_hw_init_v3(struct psmouse *psmouse) return 0; -error_passthrough: - /* Something failed while in passthrough mode, so try to get out */ - if (!alps_enter_command_mode(psmouse, NULL)) - alps_passthrough_mode_v3(psmouse, false); error: /* * Leaving the touchpad in command mode will essentially render @@ -1339,9 +1368,19 @@ error: static int alps_hw_init_rushmore_v3(struct psmouse *psmouse) { + struct alps_data *priv = psmouse->private; struct ps2dev *ps2dev = &psmouse->ps2dev; int reg_val, ret = -1; + if (priv->flags & ALPS_DUALPOINT) { + reg_val = alps_setup_trackstick_v3(psmouse, + ALPS_REG_BASE_RUSHMORE); + if (reg_val == -EIO) + goto error; + if (reg_val == -ENODEV) + priv->flags &= ~ALPS_DUALPOINT; + } + if (alps_enter_command_mode(psmouse, NULL) || alps_command_mode_read_reg(psmouse, 0xc2d9) == -1 || alps_command_mode_write_reg(psmouse, 0xc2cb, 0x00)) @@ -1562,6 +1601,12 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) priv->x_bits = 16; priv->y_bits = 12; + /* hack to make addr_command, nibble_command available */ + psmouse->private = priv; + + if (alps_probe_trackstick_v3(psmouse, ALPS_REG_BASE_RUSHMORE)) + priv->flags &= ~ALPS_DUALPOINT; + return 0; } else if (ec[0] == 0x88 && ec[1] == 0x07 && ec[2] >= 0x90 && ec[2] <= 0x9d) { |