diff options
Diffstat (limited to 'drivers/input/touchscreen/wm831x-ts.c')
-rw-r--r-- | drivers/input/touchscreen/wm831x-ts.c | 54 |
1 files changed, 49 insertions, 5 deletions
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c index 6ae054f8e0a..b9373012b3e 100644 --- a/drivers/input/touchscreen/wm831x-ts.c +++ b/drivers/input/touchscreen/wm831x-ts.c @@ -68,8 +68,23 @@ struct wm831x_ts { unsigned int pd_irq; bool pressure; bool pen_down; + struct work_struct pd_data_work; }; +static void wm831x_pd_data_work(struct work_struct *work) +{ + struct wm831x_ts *wm831x_ts = + container_of(work, struct wm831x_ts, pd_data_work); + + if (wm831x_ts->pen_down) { + enable_irq(wm831x_ts->data_irq); + dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n"); + } else { + enable_irq(wm831x_ts->pd_irq); + dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n"); + } +} + static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data) { struct wm831x_ts *wm831x_ts = irq_data; @@ -110,6 +125,9 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data) } if (!wm831x_ts->pen_down) { + /* Switch from data to pen down */ + dev_dbg(wm831x->dev, "IRQ DATA->PD\n"); + disable_irq_nosync(wm831x_ts->data_irq); /* Don't need data any more */ @@ -128,6 +146,8 @@ static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data) ABS_PRESSURE, 0); input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0); + + schedule_work(&wm831x_ts->pd_data_work); } input_sync(wm831x_ts->input_dev); @@ -141,6 +161,11 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data) struct wm831x *wm831x = wm831x_ts->wm831x; int ena = 0; + if (wm831x_ts->pen_down) + return IRQ_HANDLED; + + disable_irq_nosync(wm831x_ts->pd_irq); + /* Start collecting data */ if (wm831x_ts->pressure) ena |= WM831X_TCH_Z_ENA; @@ -156,7 +181,10 @@ static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data) WM831X_TCHPD_EINT, WM831X_TCHPD_EINT); wm831x_ts->pen_down = true; - enable_irq(wm831x_ts->data_irq); + + /* Switch from pen down to data */ + dev_dbg(wm831x->dev, "IRQ PD->DATA\n"); + schedule_work(&wm831x_ts->pd_data_work); return IRQ_HANDLED; } @@ -182,13 +210,28 @@ static void wm831x_ts_input_close(struct input_dev *idev) struct wm831x_ts *wm831x_ts = input_get_drvdata(idev); struct wm831x *wm831x = wm831x_ts->wm831x; + /* Shut the controller down, disabling all other functionality too */ wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1, - WM831X_TCH_ENA | WM831X_TCH_CVT_ENA | - WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | - WM831X_TCH_Z_ENA, 0); + WM831X_TCH_ENA | WM831X_TCH_X_ENA | + WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0); - if (wm831x_ts->pen_down) + /* Make sure any pending IRQs are done, the above will prevent + * new ones firing. + */ + synchronize_irq(wm831x_ts->data_irq); + synchronize_irq(wm831x_ts->pd_irq); + + /* Make sure the IRQ completion work is quiesced */ + flush_work_sync(&wm831x_ts->pd_data_work); + + /* If we ended up with the pen down then make sure we revert back + * to pen detection state for the next time we start up. + */ + if (wm831x_ts->pen_down) { disable_irq(wm831x_ts->data_irq); + enable_irq(wm831x_ts->pd_irq); + wm831x_ts->pen_down = false; + } } static __devinit int wm831x_ts_probe(struct platform_device *pdev) @@ -212,6 +255,7 @@ static __devinit int wm831x_ts_probe(struct platform_device *pdev) wm831x_ts->wm831x = wm831x; wm831x_ts->input_dev = input_dev; + INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work); /* * If we have a direct IRQ use it, otherwise use the interrupt |