diff options
Diffstat (limited to 'drivers/media/dvb/b2c2/flexcop-i2c.c')
| -rw-r--r-- | drivers/media/dvb/b2c2/flexcop-i2c.c | 49 |
1 files changed, 22 insertions, 27 deletions
diff --git a/drivers/media/dvb/b2c2/flexcop-i2c.c b/drivers/media/dvb/b2c2/flexcop-i2c.c index a0cfde18e64..e2bed507648 100644 --- a/drivers/media/dvb/b2c2/flexcop-i2c.c +++ b/drivers/media/dvb/b2c2/flexcop-i2c.c @@ -1,17 +1,14 @@ /* - * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III - * + * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization - * - * see flexcop.c for copyright information. + * see flexcop.c for copyright information */ #include "flexcop.h" #define FC_MAX_I2C_RETRIES 100000 -/* #define DUMP_I2C_MESSAGES */ - -static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) +static int flexcop_i2c_operation(struct flexcop_device *fc, + flexcop_ibi_value *r100) { int i; flexcop_ibi_value r; @@ -26,7 +23,7 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r r = fc->read_ibi_reg(fc, tw_sm_c_100); if (!r.tw_sm_c_100.no_base_addr_ack_error) { - if (r.tw_sm_c_100.st_done) { /* && !r.tw_sm_c_100.working_start */ + if (r.tw_sm_c_100.st_done) { *r100 = r; deb_i2c("i2c success\n"); return 0; @@ -36,15 +33,17 @@ static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r return -EREMOTEIO; } } - deb_i2c("tried %d times i2c operation, never finished or too many ack errors.\n",i); + deb_i2c("tried %d times i2c operation, " + "never finished or too many ack errors.\n", i); return -EREMOTEIO; } static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, - flexcop_ibi_value r100, u8 *buf) + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; - int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ + int len = r100.tw_sm_c_100.total_bytes, + /* remember total_bytes is buflen-1 */ ret; /* work-around to have CableStar2 and SkyStar2 rev 2.7 work @@ -81,11 +80,11 @@ static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; } - return 0; } -static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) +static int flexcop_i2c_write4(struct flexcop_device *fc, + flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ @@ -93,7 +92,6 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, /* there is at least one byte, otherwise we wouldn't be here */ r100.tw_sm_c_100.data1_reg = buf[0]; - r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; @@ -106,7 +104,7 @@ static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, } int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, - flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) + flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { int ret; @@ -129,7 +127,6 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, printk("rd("); else printk("wr("); - printk("%02x): %02x ", chipaddr, addr); #endif @@ -175,7 +172,8 @@ int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, EXPORT_SYMBOL(flexcop_i2c_request); /* master xfer callback for demodulator */ -static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], int num) { struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); int i, ret = 0; @@ -194,12 +192,13 @@ static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs /* reading */ if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, - msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len); + msgs[i].buf[0], msgs[i+1].buf, + msgs[i+1].len); i++; /* skip the following message */ } else /* writing */ ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, - msgs[i].buf[0], &msgs[i].buf[1], - msgs[i].len - 1); + msgs[i].buf[0], &msgs[i].buf[1], + msgs[i].len - 1); if (ret < 0) { err("i2c master_xfer failed"); break; @@ -226,23 +225,21 @@ static struct i2c_algorithm flexcop_algo = { int flexcop_i2c_init(struct flexcop_device *fc) { int ret; - mutex_init(&fc->i2c_mutex); fc->fc_i2c_adap[0].fc = fc; fc->fc_i2c_adap[1].fc = fc; fc->fc_i2c_adap[2].fc = fc; - fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod", - sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom", - sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner", - sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); + sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); @@ -280,7 +277,6 @@ adap_2_failed: i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); adap_1_failed: i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); - return ret; } @@ -291,6 +287,5 @@ void flexcop_i2c_exit(struct flexcop_device *fc) i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); } - fc->init_state &= ~FC_STATE_I2C_INIT; } |