1 files changed, 122 insertions, 144 deletions

diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index 4f961d2d181..fe818348b8a 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -13,10 +13,6 @@ int dvb_usb_dib0700_debug;
 module_param_named(debug,dvb_usb_dib0700_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level (1=info,2=fw,4=fwdata,8=data (or-able))." DVB_USB_DEBUG_STATUS);
 
-int dvb_usb_dib0700_ir_proto = 1;
-module_param(dvb_usb_dib0700_ir_proto, int, 0644);
-MODULE_PARM_DESC(dvb_usb_dib0700_ir_proto, "set ir protocol (0=NEC, 1=RC5 (default), 2=RC6).");
-
 static int nb_packet_buffer_size = 21;
 module_param(nb_packet_buffer_size, int, 0644);
 MODULE_PARM_DESC(nb_packet_buffer_size,
@@ -53,7 +49,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
 	int status;
 
 	deb_data(">>> ");
-	debug_dump(tx,txlen,deb_data);
+	debug_dump(tx, txlen, deb_data);
 
 	status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
 		tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
@@ -98,7 +94,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
 		deb_info("ep 0 read error (status = %d)\n",status);
 
 	deb_data("<<< ");
-	debug_dump(rx,rxlen,deb_data);
+	debug_dump(rx, rxlen, deb_data);
 
 	return status; /* length in case of success */
 }
@@ -106,28 +102,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
 int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
 {
 	u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
-	return dib0700_ctrl_wr(d,buf,3);
+	return dib0700_ctrl_wr(d, buf, sizeof(buf));
 }
 
 static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
 {
-    struct dib0700_state *st = d->priv;
-    u8 b[3];
-    int ret;
-
-    if (st->fw_version >= 0x10201) {
-	b[0] = REQUEST_SET_USB_XFER_LEN;
-	b[1] = (nb_ts_packets >> 8)&0xff;
-	b[2] = nb_ts_packets & 0xff;
-
-	deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
-
-	ret = dib0700_ctrl_wr(d, b, 3);
-    } else {
-	deb_info("this firmware does not allow to change the USB xfer len\n");
-	ret = -EIO;
-    }
-    return ret;
+	struct dib0700_state *st = d->priv;
+	u8 b[3];
+	int ret;
+
+	if (st->fw_version >= 0x10201) {
+		b[0] = REQUEST_SET_USB_XFER_LEN;
+		b[1] = (nb_ts_packets >> 8) & 0xff;
+		b[2] = nb_ts_packets & 0xff;
+
+		deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
+
+		ret = dib0700_ctrl_wr(d, b, sizeof(b));
+	} else {
+		deb_info("this firmware does not allow to change the USB xfer len\n");
+		ret = -EIO;
+	}
+
+	return ret;
 }
 
 /*
@@ -178,7 +175,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 			value = ((en_start << 7) | (en_stop << 6) |
 				 (msg[i].len & 0x3F)) << 8 | i2c_dest;
 			/* I2C ctrl + FE bus; */
-			index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+			index = ((gen_mode << 6) & 0xC0) |
+				((bus_mode << 4) & 0x30);
 
 			result = usb_control_msg(d->udev,
 						 usb_rcvctrlpipe(d->udev, 0),
@@ -198,11 +196,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
 		} else {
 			/* Write request */
 			buf[0] = REQUEST_NEW_I2C_WRITE;
-			buf[1] = (msg[i].addr << 1);
+			buf[1] = msg[i].addr << 1;
 			buf[2] = (en_start << 7) | (en_stop << 6) |
 				(msg[i].len & 0x3F);
 			/* I2C ctrl + FE bus; */
-			buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+			buf[3] = ((gen_mode << 6) & 0xC0) |
+				 ((bus_mode << 4) & 0x30);
 			/* The Actual i2c payload */
 			memcpy(&buf[4], msg[i].buf, msg[i].len);
 
@@ -240,7 +239,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 
 	for (i = 0; i < num; i++) {
 		/* fill in the address */
-		buf[1] = (msg[i].addr << 1);
+		buf[1] = msg[i].addr << 1;
 		/* fill the buffer */
 		memcpy(&buf[2], msg[i].buf, msg[i].len);
 
@@ -368,7 +367,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 	u8 buf[260];
 
 	while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
-		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
+		deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
+				hx.addr, hx.len, hx.chk);
 
 		buf[0] = hx.len;
 		buf[1] = (hx.addr >> 8) & 0xff;
@@ -408,16 +408,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
 				  REQUEST_GET_VERSION,
 				  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
 				  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
-	fw_version = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+	fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
 
 	/* set the buffer size - DVB-USB is allocating URB buffers
 	 * only after the firwmare download was successful */
 	for (i = 0; i < dib0700_device_count; i++) {
 		for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
 				adap_num++) {
-			if (fw_version >= 0x10201)
+			if (fw_version >= 0x10201) {
 				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
-			else {
+			} else {
 				/* for fw version older than 1.20.1,
 				 * the buffersize has to be n times 512 */
 				dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
@@ -453,7 +453,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 	if (st->disable_streaming_master_mode == 1)
 		b[2] = 0x00;
 	else
-		b[2] = (0x01 << 4); /* Master mode */
+		b[2] = 0x01 << 4; /* Master mode */
 
 	b[3] = 0x00;
 
@@ -466,11 +466,44 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 
 	b[2] |= st->channel_state;
 
-	deb_info("data for streaming: %x %x\n",b[1],b[2]);
+	deb_info("data for streaming: %x %x\n", b[1], b[2]);
 
 	return dib0700_ctrl_wr(adap->dev, b, 4);
 }
 
+int dib0700_change_protocol(void *priv, u64 ir_type)
+{
+	struct dvb_usb_device *d = priv;
+	struct dib0700_state *st = d->priv;
+	u8 rc_setup[3] = { REQUEST_SET_RC, 0, 0 };
+	int new_proto, ret;
+
+	/* Set the IR mode */
+	if (ir_type == IR_TYPE_RC5)
+		new_proto = 1;
+	else if (ir_type == IR_TYPE_NEC)
+		new_proto = 0;
+	else if (ir_type == IR_TYPE_RC6) {
+		if (st->fw_version < 0x10200)
+			return -EINVAL;
+
+		new_proto = 2;
+	} else
+		return -EINVAL;
+
+	rc_setup[1] = new_proto;
+
+	ret = dib0700_ctrl_wr(d, rc_setup, sizeof(rc_setup));
+	if (ret < 0) {
+		err("ir protocol setup failed");
+		return ret;
+	}
+
+	d->props.rc.core.protocol = ir_type;
+
+	return ret;
+}
+
 /* Number of keypresses to ignore before start repeating */
 #define RC_REPEAT_DELAY_V1_20 10
 
@@ -478,7 +511,13 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 struct dib0700_rc_response {
 	u8 report_id;
 	u8 data_state;
-	u16 system;
+	union {
+		u16 system16;
+		struct {
+			u8 system;
+			u8 not_system;
+		};
+	};
 	u8 data;
 	u8 not_data;
 };
@@ -487,14 +526,10 @@ struct dib0700_rc_response {
 static void dib0700_rc_urb_completion(struct urb *purb)
 {
 	struct dvb_usb_device *d = purb->context;
-	struct dvb_usb_rc_key *keymap;
 	struct dib0700_state *st;
-	struct dib0700_rc_response poll_reply;
-	u8 *buf;
-	int found = 0;
-	u32 event;
-	int state;
-	int i;
+	struct dib0700_rc_response *poll_reply;
+	u32 uninitialized_var(keycode);
+	u8 toggle;
 
 	deb_info("%s()\n", __func__);
 	if (d == NULL)
@@ -506,9 +541,8 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		return;
 	}
 
-	keymap = d->props.rc_key_map;
 	st = d->priv;
-	buf = (u8 *)purb->transfer_buffer;
+	poll_reply = purb->transfer_buffer;
 
 	if (purb->status < 0) {
 		deb_info("discontinuing polling\n");
@@ -521,104 +555,52 @@ static void dib0700_rc_urb_completion(struct urb *purb)
 		goto resubmit;
 	}
 
-	/* Set initial results in case we exit the function early */
-	event = 0;
-	state = REMOTE_NO_KEY_PRESSED;
-
-	deb_data("IR raw %02X %02X %02X %02X %02X %02X (len %d)\n", buf[0],
-		 buf[1], buf[2], buf[3], buf[4], buf[5], purb->actual_length);
+	deb_data("IR ID = %02X state = %02X System = %02X %02X Cmd = %02X %02X (len %d)\n",
+		 poll_reply->report_id, poll_reply->data_state,
+		 poll_reply->system, poll_reply->not_system,
+		 poll_reply->data, poll_reply->not_data,
+		 purb->actual_length);
 
-	switch (dvb_usb_dib0700_ir_proto) {
-	case 0:
-		/* NEC Protocol */
-		poll_reply.report_id  = 0;
-		poll_reply.data_state = 1;
-		poll_reply.system     = buf[2];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
+	switch (d->props.rc.core.protocol) {
+	case IR_TYPE_NEC:
+		toggle = 0;
 
 		/* NEC protocol sends repeat code as 0 0 0 FF */
-		if ((poll_reply.system == 0x00) && (poll_reply.data == 0x00)
-		    && (poll_reply.not_data == 0xff)) {
-			poll_reply.data_state = 2;
+		if ((poll_reply->system == 0x00) && (poll_reply->data == 0x00)
+		    && (poll_reply->not_data == 0xff)) {
+			poll_reply->data_state = 2;
 			break;
 		}
+
+		if ((poll_reply->system ^ poll_reply->not_system) != 0xff) {
+			deb_data("NEC extended protocol\n");
+			/* NEC extended code - 24 bits */
+			keycode = poll_reply->system16 << 8 | poll_reply->data;
+		} else {
+			deb_data("NEC normal protocol\n");
+			/* normal NEC code - 16 bits */
+			keycode = poll_reply->system << 8 | poll_reply->data;
+		}
+
 		break;
 	default:
+		deb_data("RC5 protocol\n");
 		/* RC5 Protocol */
-		poll_reply.report_id  = buf[0];
-		poll_reply.data_state = buf[1];
-		poll_reply.system     = (buf[2] << 8) | buf[3];
-		poll_reply.data       = buf[4];
-		poll_reply.not_data   = buf[5];
+		toggle = poll_reply->report_id;
+		keycode = poll_reply->system16 << 8 | poll_reply->data;
+
 		break;
 	}
 
-	if ((poll_reply.data + poll_reply.not_data) != 0xff) {
+	if ((poll_reply->data + poll_reply->not_data) != 0xff) {
 		/* Key failed integrity check */
 		err("key failed integrity check: %04x %02x %02x",
-		    poll_reply.system,
-		    poll_reply.data, poll_reply.not_data);
-		goto resubmit;
-	}
-
-	deb_data("rid=%02x ds=%02x sm=%04x d=%02x nd=%02x\n",
-		 poll_reply.report_id, poll_reply.data_state,
-		 poll_reply.system, poll_reply.data, poll_reply.not_data);
-
-	/* Find the key in the map */
-	for (i = 0; i < d->props.rc_key_map_size; i++) {
-		if (rc5_custom(&keymap[i]) == (poll_reply.system & 0xff) &&
-		    rc5_data(&keymap[i]) == poll_reply.data) {
-			event = keymap[i].event;
-			found = 1;
-			break;
-		}
-	}
-
-	if (found == 0) {
-		err("Unknown remote controller key: %04x %02x %02x",
-		    poll_reply.system, poll_reply.data, poll_reply.not_data);
-		d->last_event = 0;
+		    poll_reply->system,
+		    poll_reply->data, poll_reply->not_data);
 		goto resubmit;
 	}
 
-	if (poll_reply.data_state == 1) {
-		/* New key hit */
-		st->rc_counter = 0;
-		event = keymap[i].event;
-		state = REMOTE_KEY_PRESSED;
-		d->last_event = keymap[i].event;
-	} else if (poll_reply.data_state == 2) {
-		/* Key repeated */
-		st->rc_counter++;
-
-		/* prevents unwanted double hits */
-		if (st->rc_counter > RC_REPEAT_DELAY_V1_20) {
-			event = d->last_event;
-			state = REMOTE_KEY_PRESSED;
-			st->rc_counter = RC_REPEAT_DELAY_V1_20;
-		}
-	} else {
-		err("Unknown data state [%d]", poll_reply.data_state);
-	}
-
-	switch (state) {
-	case REMOTE_NO_KEY_PRESSED:
-		break;
-	case REMOTE_KEY_PRESSED:
-		deb_info("key pressed\n");
-		d->last_event = event;
-	case REMOTE_KEY_REPEAT:
-		deb_info("key repeated\n");
-		input_event(d->rc_input_dev, EV_KEY, event, 1);
-		input_sync(d->rc_input_dev);
-		input_event(d->rc_input_dev, EV_KEY, d->last_event, 0);
-		input_sync(d->rc_input_dev);
-		break;
-	default:
-		break;
-	}
+	ir_keydown(d->rc_input_dev, keycode, toggle);
 
 resubmit:
 	/* Clean the buffer before we requeue */
@@ -631,21 +613,10 @@ resubmit:
 int dib0700_rc_setup(struct dvb_usb_device *d)
 {
 	struct dib0700_state *st = d->priv;
-	u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
 	struct urb *purb;
 	int ret;
-	int i;
-
-	if (d->props.rc_key_map == NULL)
-		return 0;
-
-	/* Set the IR mode */
-	i = dib0700_ctrl_wr(d, rc_setup, 3);
-	if (i<0) {
-		err("ir protocol setup failed");
-		return -1;
-	}
 
+	/* Poll-based. Don't initialize bulk mode */
 	if (st->fw_version < 0x10200)
 		return 0;
 
@@ -653,14 +624,14 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
 	purb = usb_alloc_urb(0, GFP_KERNEL);
 	if (purb == NULL) {
 		err("rc usb alloc urb failed\n");
-		return -1;
+		return -ENOMEM;
 	}
 
 	purb->transfer_buffer = kzalloc(RC_MSG_SIZE_V1_20, GFP_KERNEL);
 	if (purb->transfer_buffer == NULL) {
 		err("rc kzalloc failed\n");
 		usb_free_urb(purb);
-		return -1;
+		return -ENOMEM;
 	}
 
 	purb->status = -EINPROGRESS;
@@ -669,12 +640,10 @@ int dib0700_rc_setup(struct dvb_usb_device *d)
 			  dib0700_rc_urb_completion, d);
 
 	ret = usb_submit_urb(purb, GFP_ATOMIC);
-	if (ret != 0) {
+	if (ret)
 		err("rc submit urb failed\n");
-		return -1;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int dib0700_probe(struct usb_interface *intf,
@@ -698,6 +667,15 @@ static int dib0700_probe(struct usb_interface *intf,
 			st->fw_version = fw_version;
 			st->nb_packet_buffer_size = (u32)nb_packet_buffer_size;
 
+			/* Disable polling mode on newer firmwares */
+			if (st->fw_version >= 0x10200)
+				dev->props.rc.core.bulk_mode = true;
+			else
+				dev->props.rc.core.bulk_mode = false;
+
+			/* Need a higher delay, to avoid wrong repeat */
+			dev->rc_input_dev->rep[REP_DELAY] = 500;
+
 			dib0700_rc_setup(dev);
 
 			return 0;