diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb')
26 files changed, 4323 insertions, 0 deletions
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig new file mode 100644 index 00000000000..8aa32f6e447 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -0,0 +1,99 @@ +config DVB_USB + tristate "Support for various USB DVB devices" + depends on DVB_CORE && USB + select FW_LOADER + help + By enabling this you will be able to choose the various USB 1.1 and + USB2.0 DVB devices. + + Almost every USB device needs a firmware, please look into + <file:Documentation/dvb/README.dvb-usb> + + Say Y if you own an USB DVB device. + +config DVB_USB_DEBUG + bool "Enable extended debug support for all DVB-USB devices" + depends on DVB_USB + help + Say Y if you want to enable debuging. See modinfo dvb-usb (and the + appropriate drivers) for debug levels. + +config DVB_USB_A800 + tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" + depends on DVB_USB + help + Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. + +config DVB_USB_DIBUSB_MB + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" + depends on DVB_USB + help + Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. + + Devices supported by this driver: + TwinhanDTV USB-Ter (VP7041) + TwinhanDTV Magic Box (VP7041e) + KWorld/JetWay/ADSTech V-Stream XPERT DTV - DVB-T USB1.1 and USB2.0 + Hama DVB-T USB1.1-Box + DiBcom USB1.1 reference devices (non-public) + Ultima Electronic/Artec T1 USB TVBOX + Compro Videomate DVB-U2000 - DVB-T USB + Grandtec DVB-T USB + Avermedia AverTV DVBT USB1.1 + Artec T1 USB1.1 boxes + + The VP7041 seems to be identical to "CTS Portable" (Chinese + Television System). + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_DIBUSB_MC + tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" + depends on DVB_USB + help + Support for 2.0 DVB-T receivers based on reference designs made by + DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. + + Devices supported by this driver: + DiBcom USB2.0 reference devices (non-public) + Artec T1 USB2.0 boxes + + Say Y if you own such a device and want to use it. You should build it as + a module. + +config DVB_USB_UMT_010 + tristate "HanfTek UMT-010 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. + +config DVB_USB_DIGITV + tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. + +config DVB_USB_VP7045 + tristate "TwinhanDTV Alpha/MagicBoxII and DNTV tinyUSB2 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the + TwinhanDTV Alpha (stick) (VP-7045), + TwinhanDTV MagicBox II (VP-7046) and + DigitalNow TinyUSB 2 DVB-t DVB-T USB2.0 receivers. + +config DVB_USB_NOVA_T_USB2 + tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. + +config DVB_USB_DTT200U + tristate "Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 support" + depends on DVB_USB + help + Say Y here to support the Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + + The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile new file mode 100644 index 00000000000..d65b50f9abb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -0,0 +1,30 @@ +dvb-usb-objs = dvb-usb-firmware.o dvb-usb-init.o dvb-usb-urb.o dvb-usb-i2c.o dvb-usb-dvb.o dvb-usb-remote.o +obj-$(CONFIG_DVB_USB) += dvb-usb.o + +dvb-usb-vp7045-objs = vp7045.o vp7045-fe.o +obj-$(CONFIG_DVB_USB_VP7045) += dvb-usb-vp7045.o + +dvb-usb-dtt200u-objs = dtt200u.o dtt200u-fe.o +obj-$(CONFIG_DVB_USB_DTT200U) += dvb-usb-dtt200u.o + +dvb-usb-dibusb-common-objs = dibusb-common.o + +dvb-usb-a800-objs = a800.o +obj-$(CONFIG_DVB_USB_A800) += dvb-usb-dibusb-common.o dvb-usb-a800.o + +dvb-usb-dibusb-mb-objs = dibusb-mb.o +obj-$(CONFIG_DVB_USB_DIBUSB_MB) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mb.o + +dvb-usb-dibusb-mc-objs = dibusb-mc.o +obj-$(CONFIG_DVB_USB_DIBUSB_MC) += dvb-usb-dibusb-common.o dvb-usb-dibusb-mc.o + +dvb-usb-nova-t-usb2-objs = nova-t-usb2.o +obj-$(CONFIG_DVB_USB_NOVA_T_USB2) += dvb-usb-dibusb-common.o dvb-usb-nova-t-usb2.o + +dvb-usb-umt-010-objs = umt-010.o +obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o + +dvb-usb-digitv-objs = digitv.o +obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c new file mode 100644 index 00000000000..a3542935604 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -0,0 +1,176 @@ +/* DVB USB framework compliant Linux driver for the AVerMedia AverTV DVB-T + * USB2.0 (A800) DVB-T receiver. + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to + * - AVerMedia who kindly provided information and + * - Glen Harris who suffered from my mistakes during development. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (rc=1 (or-able))." DVB_USB_DEBUG_STATUS); +#define deb_rc(args...) dprintk(debug,0x01,args) + +static int a800_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + /* do nothing for the AVerMedia */ + return 0; +} + +static struct dvb_usb_rc_key a800_rc_keys[] = { + { 0x02, 0x01, KEY_PROG1 }, /* SOURCE */ + { 0x02, 0x00, KEY_POWER }, /* POWER */ + { 0x02, 0x05, KEY_1 }, /* 1 */ + { 0x02, 0x06, KEY_2 }, /* 2 */ + { 0x02, 0x07, KEY_3 }, /* 3 */ + { 0x02, 0x09, KEY_4 }, /* 4 */ + { 0x02, 0x0a, KEY_5 }, /* 5 */ + { 0x02, 0x0b, KEY_6 }, /* 6 */ + { 0x02, 0x0d, KEY_7 }, /* 7 */ + { 0x02, 0x0e, KEY_8 }, /* 8 */ + { 0x02, 0x0f, KEY_9 }, /* 9 */ + { 0x02, 0x12, KEY_LEFT }, /* L / DISPLAY */ + { 0x02, 0x11, KEY_0 }, /* 0 */ + { 0x02, 0x13, KEY_RIGHT }, /* R / CH RTN */ + { 0x02, 0x17, KEY_PROG2 }, /* SNAP SHOT */ + { 0x02, 0x10, KEY_PROG3 }, /* 16-CH PREV */ + { 0x02, 0x03, KEY_CHANNELUP }, /* CH UP */ + { 0x02, 0x1e, KEY_VOLUMEDOWN }, /* VOL DOWN */ + { 0x02, 0x0c, KEY_ZOOM }, /* FULL SCREEN */ + { 0x02, 0x1f, KEY_VOLUMEUP }, /* VOL UP */ + { 0x02, 0x02, KEY_CHANNELDOWN }, /* CH DOWN */ + { 0x02, 0x14, KEY_MUTE }, /* MUTE */ + { 0x02, 0x08, KEY_AUDIO }, /* AUDIO */ + { 0x02, 0x19, KEY_RECORD }, /* RECORD */ + { 0x02, 0x18, KEY_PLAY }, /* PLAY */ + { 0x02, 0x1b, KEY_STOP }, /* STOP */ + { 0x02, 0x1a, KEY_PLAYPAUSE }, /* TIMESHIFT / PAUSE */ + { 0x02, 0x1d, KEY_BACK }, /* << / RED */ + { 0x02, 0x1c, KEY_FORWARD }, /* >> / YELLOW */ + { 0x02, 0x03, KEY_TEXT }, /* TELETEXT */ + { 0x02, 0x01, KEY_FIRST }, /* |<< / GREEN */ + { 0x02, 0x00, KEY_LAST }, /* >>| / BLUE */ + { 0x02, 0x04, KEY_EPG }, /* EPG */ + { 0x02, 0x15, KEY_MENU }, /* MENU */ +}; + +int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5]; + if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), + 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, + 2*HZ) != 5) + return -ENODEV; + + /* call the universal NEC remote processor, to find out the key's state and event */ + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties a800_properties; + +static int a800_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&a800_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id a800_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_DVBT_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, a800_table); + +static struct dvb_usb_properties a800_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-avertv-a800-02.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = a800_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = a800_rc_keys, + .rc_key_map_size = ARRAY_SIZE(a800_rc_keys), + .rc_query = a800_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "AVerMedia AverTV DVB-T USB 2.0 (A800)", + { &a800_table[0], NULL }, + { &a800_table[1], NULL }, + }, + } +}; + +static struct usb_driver a800_driver = { + .owner = THIS_MODULE, + .name = "AVerMedia AverTV DVB-T USB 2.0 (A800)", + .probe = a800_probe, + .disconnect = dvb_usb_device_exit, + .id_table = a800_table, +}; + +/* module stuff */ +static int __init a800_module_init(void) +{ + int result; + if ((result = usb_register(&a800_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit a800_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&a800_driver); +} + +module_init (a800_module_init); +module_exit (a800_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("AVerMedia AverTV DVB-T USB 2.0 (A800)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb-common.c b/drivers/media/dvb/dvb-usb/dibusb-common.c new file mode 100644 index 00000000000..63b626f70c8 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-common.c @@ -0,0 +1,272 @@ +/* Common methods for dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info (|-able))." DVB_USB_DEBUG_STATUS); +MODULE_LICENSE("GPL"); + +#define deb_info(args...) dprintk(debug,0x01,args) + +/* common stuff used by the different dibusb modules */ +int dibusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (ops->fifo_ctrl != NULL) + if (ops->fifo_ctrl(d->fe,onoff)) { + err("error while controlling the fifo of the demod."); + return -ENODEV; + } + } + return 0; +} +EXPORT_SYMBOL(dibusb_streaming_ctrl); + +int dibusb_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (d->pid_filtering && ops->pid_ctrl != NULL) + ops->pid_ctrl(d->fe,index,pid,onoff); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter); + +int dibusb_pid_filter_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (d->priv != NULL) { + struct dib_fe_xfer_ops *ops = d->priv; + if (ops->pid_parse != NULL) + if (ops->pid_parse(d->fe,onoff) < 0) + err("could not handle pid_parser"); + } + return 0; +} +EXPORT_SYMBOL(dibusb_pid_filter_ctrl); + +int dibusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b[3]; + int ret; + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = DIBUSB_IOCTL_CMD_POWER_MODE; + b[2] = onoff ? DIBUSB_IOCTL_POWER_WAKEUP : DIBUSB_IOCTL_POWER_SLEEP; + ret = dvb_usb_generic_write(d,b,3); + msleep(10); + return ret; +} +EXPORT_SYMBOL(dibusb_power_ctrl); + +int dibusb2_0_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b[2]; + b[0] = DIBUSB_REQ_SET_IOCTL; + b[1] = onoff ? DIBUSB_IOCTL_CMD_ENABLE_STREAM : DIBUSB_IOCTL_CMD_DISABLE_STREAM; + + dvb_usb_generic_write(d,b,3); + + return dibusb_streaming_ctrl(d,onoff); +} +EXPORT_SYMBOL(dibusb2_0_streaming_ctrl); + +int dibusb2_0_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + if (onoff) { + u8 b[3] = { DIBUSB_REQ_SET_IOCTL, DIBUSB_IOCTL_CMD_POWER_MODE, DIBUSB_IOCTL_POWER_WAKEUP }; + return dvb_usb_generic_write(d,b,3); + } else + return 0; +} +EXPORT_SYMBOL(dibusb2_0_power_ctrl); + +static int dibusb_i2c_msg(struct dvb_usb_device *d, u8 addr, + u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen) +{ + u8 sndbuf[wlen+4]; /* lead(1) devaddr,direction(1) addr(2) data(wlen) (len(2) (when reading)) */ + /* write only ? */ + int wo = (rbuf == NULL || rlen == 0), + len = 2 + wlen + (wo ? 0 : 2); + + sndbuf[0] = wo ? DIBUSB_REQ_I2C_WRITE : DIBUSB_REQ_I2C_READ; + sndbuf[1] = (addr << 1) | (wo ? 0 : 1); + + memcpy(&sndbuf[2],wbuf,wlen); + + if (!wo) { + sndbuf[wlen+2] = (rlen >> 8) & 0xff; + sndbuf[wlen+3] = rlen & 0xff; + } + + return dvb_usb_generic_rw(d,sndbuf,len,rbuf,rlen,0); +} + +/* + * I2C master xfer function + */ +static int dibusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else + if (dibusb_i2c_msg(d, msg[i].addr, msg[i].buf,msg[i].len,NULL,0) < 0) + break; + } + + up(&d->i2c_sem); + return i; +} + +static u32 dibusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +struct i2c_algorithm dibusb_i2c_algo = { + .name = "DiBcom USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = dibusb_i2c_xfer, + .functionality = dibusb_i2c_func, +}; +EXPORT_SYMBOL(dibusb_i2c_algo); + +int dibusb_read_eeprom_byte(struct dvb_usb_device *d, u8 offs, u8 *val) +{ + u8 wbuf[1] = { offs }; + return dibusb_i2c_msg(d, 0x50, wbuf, 1, val, 1); +} +EXPORT_SYMBOL(dibusb_read_eeprom_byte); + +int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *d) +{ + struct dib3000_config demod_cfg; + struct dibusb_state *st = d->priv; + + demod_cfg.pll_set = dvb_usb_pll_set_i2c; + demod_cfg.pll_init = dvb_usb_pll_init_i2c; + + for (demod_cfg.demod_address = 0x8; demod_cfg.demod_address < 0xd; demod_cfg.demod_address++) + if ((d->fe = dib3000mc_attach(&demod_cfg,&d->i2c_adap,&st->ops)) != NULL) { + d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl; + return 0; + } + + return -ENODEV; +} +EXPORT_SYMBOL(dibusb_dib3000mc_frontend_attach); + +int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *d) +{ + d->pll_addr = 0x60; + d->pll_desc = &dvb_pll_env57h1xd5; + return 0; +} +EXPORT_SYMBOL(dibusb_dib3000mc_tuner_attach); + +/* + * common remote control stuff + */ +struct dvb_usb_rc_key dibusb_rc_keys[] = { + /* Key codes for the little Artec T1/Twinhan/HAMA/ remote. */ + { 0x00, 0x16, KEY_POWER }, + { 0x00, 0x10, KEY_MUTE }, + { 0x00, 0x03, KEY_1 }, + { 0x00, 0x01, KEY_2 }, + { 0x00, 0x06, KEY_3 }, + { 0x00, 0x09, KEY_4 }, + { 0x00, 0x1d, KEY_5 }, + { 0x00, 0x1f, KEY_6 }, + { 0x00, 0x0d, KEY_7 }, + { 0x00, 0x19, KEY_8 }, + { 0x00, 0x1b, KEY_9 }, + { 0x00, 0x15, KEY_0 }, + { 0x00, 0x05, KEY_CHANNELUP }, + { 0x00, 0x02, KEY_CHANNELDOWN }, + { 0x00, 0x1e, KEY_VOLUMEUP }, + { 0x00, 0x0a, KEY_VOLUMEDOWN }, + { 0x00, 0x11, KEY_RECORD }, + { 0x00, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */ + { 0x00, 0x14, KEY_PLAY }, + { 0x00, 0x1a, KEY_STOP }, + { 0x00, 0x40, KEY_REWIND }, + { 0x00, 0x12, KEY_FASTFORWARD }, + { 0x00, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */ + { 0x00, 0x4c, KEY_PAUSE }, + { 0x00, 0x4d, KEY_SCREEN }, /* Full screen mode. */ + { 0x00, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ + /* additional keys TwinHan VisionPlus, the Artec seemingly not have */ + { 0x00, 0x0c, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x1c, KEY_EPG }, /* EPG */ + { 0x00, 0x00, KEY_TAB }, /* Tab */ + { 0x00, 0x48, KEY_INFO }, /* Preview */ + { 0x00, 0x04, KEY_LIST }, /* RecordList */ + { 0x00, 0x0f, KEY_TEXT }, /* Teletext */ + /* Key codes for the KWorld/ADSTech/JetWay remote. */ + { 0x86, 0x12, KEY_POWER }, + { 0x86, 0x0f, KEY_SELECT }, /* source */ + { 0x86, 0x0c, KEY_UNKNOWN }, /* scan */ + { 0x86, 0x0b, KEY_EPG }, + { 0x86, 0x10, KEY_MUTE }, + { 0x86, 0x01, KEY_1 }, + { 0x86, 0x02, KEY_2 }, + { 0x86, 0x03, KEY_3 }, + { 0x86, 0x04, KEY_4 }, + { 0x86, 0x05, KEY_5 }, + { 0x86, 0x06, KEY_6 }, + { 0x86, 0x07, KEY_7 }, + { 0x86, 0x08, KEY_8 }, + { 0x86, 0x09, KEY_9 }, + { 0x86, 0x0a, KEY_0 }, + { 0x86, 0x18, KEY_ZOOM }, + { 0x86, 0x1c, KEY_UNKNOWN }, /* preview */ + { 0x86, 0x13, KEY_UNKNOWN }, /* snap */ + { 0x86, 0x00, KEY_UNDO }, + { 0x86, 0x1d, KEY_RECORD }, + { 0x86, 0x0d, KEY_STOP }, + { 0x86, 0x0e, KEY_PAUSE }, + { 0x86, 0x16, KEY_PLAY }, + { 0x86, 0x11, KEY_BACK }, + { 0x86, 0x19, KEY_FORWARD }, + { 0x86, 0x14, KEY_UNKNOWN }, /* pip */ + { 0x86, 0x15, KEY_ESC }, + { 0x86, 0x1a, KEY_UP }, + { 0x86, 0x1e, KEY_DOWN }, + { 0x86, 0x1f, KEY_LEFT }, + { 0x86, 0x1b, KEY_RIGHT }, +}; +EXPORT_SYMBOL(dibusb_rc_keys); + +int dibusb_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = DIBUSB_REQ_POLL_REMOTE; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} +EXPORT_SYMBOL(dibusb_rc_query); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c new file mode 100644 index 00000000000..a0ffbb59fa1 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -0,0 +1,316 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-B) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d) +{ + struct dib3000_config demod_cfg; + struct dibusb_state *st = d->priv; + + demod_cfg.demod_address = 0x8; + demod_cfg.pll_set = dvb_usb_pll_set_i2c; + demod_cfg.pll_init = dvb_usb_pll_init_i2c; + + if ((d->fe = dib3000mb_attach(&demod_cfg,&d->i2c_adap,&st->ops)) == NULL) + return -ENODEV; + + d->tuner_pass_ctrl = st->ops.tuner_pass_ctrl; + + return 0; +} + +/* some of the dibusb 1.1 device aren't equipped with the default tuner + * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures + * this out. */ +static int dibusb_dib3000mb_tuner_attach (struct dvb_usb_device *d) +{ + u8 b[2] = { 0,0 }, b2[1]; + int ret = 0; + struct i2c_msg msg[2] = { + { .flags = 0, .buf = b, .len = 2 }, + { .flags = I2C_M_RD, .buf = b2, .len = 1 }, + }; + + /* the Panasonic sits on I2C addrass 0x60, the Thomson on 0x61 */ + msg[0].addr = msg[1].addr = 0x60; + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(d->fe,1,msg[0].addr); + + if (i2c_transfer (&d->i2c_adap, msg, 2) != 2) { + err("tuner i2c write failed."); + ret = -EREMOTEIO; + } + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(d->fe,0,msg[0].addr); + + if (b2[0] == 0xfe) { + info("this device has the Thomson Cable onboard. Which is default."); + d->pll_addr = 0x61; + d->pll_desc = &dvb_pll_tua6010xs; + } else { + u8 bpll[4] = { 0x0b, 0xf5, 0x85, 0xab }; + info("this device has the Panasonic ENV77H11D5 onboard."); + d->pll_addr = 0x60; + memcpy(d->pll_init,bpll,4); + d->pll_desc = &dvb_pll_tda665x; + } + + return ret; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties dibusb1_1_properties; +static struct dvb_usb_properties dibusb1_1_an2235_properties; +static struct dvb_usb_properties dibusb2_0b_properties; + +static int dibusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (dvb_usb_device_init(intf,&dibusb1_1_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&dibusb1_1_an2235_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&dibusb2_0b_properties,THIS_MODULE) == 0) + return 0; + + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mb_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, +/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, +/* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, +/* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, +/* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, +/* 05 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 06 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 07 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_COLD) }, +/* 08 */ { USB_DEVICE(USB_VID_EMPIA, USB_PID_KWORLD_VSTREAM_WARM) }, +/* 09 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_COLD) }, +/* 10 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_GRANDTEC_DVBT_USB_WARM) }, +/* 11 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_COLD) }, +/* 12 */ { USB_DEVICE(USB_VID_GRANDTEC, USB_PID_DIBCOM_MOD3000_WARM) }, +/* 13 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_COLD) }, +/* 14 */ { USB_DEVICE(USB_VID_HYPER_PALTEK, USB_PID_UNK_HYPER_PALTEK_WARM) }, +/* 15 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_COLD) }, +/* 16 */ { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7041_WARM) }, +/* 17 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_COLD) }, +/* 18 */ { USB_DEVICE(USB_VID_TWINHAN, USB_PID_TWINHAN_VP7041_WARM) }, +/* 19 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_COLD) }, +/* 20 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_WARM) }, +/* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, +/* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, +/* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, +/* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); + +static struct dvb_usb_properties dibusb1_1_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 16, + + .usb_ctrl = CYPRESS_AN2135, + + .firmware = "dvb-usb-dibusb-5.0.0.11.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 8, + .devices = { + { "AVerMedia AverTV DVBT USB1.1", + { &dibusb_dib3000mb_table[0], NULL }, + { &dibusb_dib3000mb_table[1], NULL }, + }, + { "Compro Videomate DVB-U2000 - DVB-T USB1.1 (please confirm to linux-dvb)", + { &dibusb_dib3000mb_table[2], &dibusb_dib3000mb_table[4], NULL}, + { &dibusb_dib3000mb_table[3], NULL }, + }, + { "DiBcom USB1.1 DVB-T reference design (MOD3000)", + { &dibusb_dib3000mb_table[5], NULL }, + { &dibusb_dib3000mb_table[6], NULL }, + }, + { "KWorld V-Stream XPERT DTV - DVB-T USB1.1", + { &dibusb_dib3000mb_table[7], NULL }, + { &dibusb_dib3000mb_table[8], NULL }, + }, + { "Grandtec USB1.1 DVB-T", + { &dibusb_dib3000mb_table[9], &dibusb_dib3000mb_table[11], NULL }, + { &dibusb_dib3000mb_table[10], &dibusb_dib3000mb_table[12], NULL }, + }, + { "Unkown USB1.1 DVB-T device ???? please report the name to the author", + { &dibusb_dib3000mb_table[13], NULL }, + { &dibusb_dib3000mb_table[14], NULL }, + }, + { "TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device", + { &dibusb_dib3000mb_table[15], &dibusb_dib3000mb_table[17], NULL}, + { &dibusb_dib3000mb_table[16], &dibusb_dib3000mb_table[18], NULL}, + }, + { "Artec T1 USB1.1 TVBOX with AN2135", + { &dibusb_dib3000mb_table[19], NULL }, + { &dibusb_dib3000mb_table[20], NULL }, + }, + } +}; + +static struct dvb_usb_properties dibusb1_1_an2235_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_AN2235, + + .firmware = "dvb-usb-dibusb-an2235-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Artec T1 USB1.1 TVBOX with AN2235", + { &dibusb_dib3000mb_table[20], NULL }, + { &dibusb_dib3000mb_table[21], NULL }, + }, + } +}; + +static struct dvb_usb_properties dibusb2_0b_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .usb_ctrl = CYPRESS_FX2, + + .firmware = "dvb-usb-adstech-usb2-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mb_frontend_attach, + .tuner_attach = dibusb_dib3000mb_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* wow, that is ugly ... I want to load it to the driver dynamically */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "KWorld/ADSTech Instant DVB-T USB 2.0", + { &dibusb_dib3000mb_table[23], NULL }, + { &dibusb_dib3000mb_table[24], NULL }, /* device ID with default DIBUSB2_0-firmware */ + }, + } +}; + +static struct usb_driver dibusb_driver = { + .owner = THIS_MODULE, + .name = "DiBcom based USB DVB-T devices (DiB3000M-B based)", + .probe = dibusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mb_table, +}; + +/* module stuff */ +static int __init dibusb_module_init(void) +{ + int result; + if ((result = usb_register(&dibusb_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit dibusb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dibusb_driver); +} + +module_init (dibusb_module_init); +module_exit (dibusb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB DVB-T devices (DiB3000M-B based)"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c new file mode 100644 index 00000000000..aad8ed3fe00 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -0,0 +1,116 @@ +/* DVB USB compliant linux driver for mobile DVB-T USB devices based on + * reference designs made by DiBcom (http://www.dibcom.fr/) (DiB3000M-C/P) + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * based on GPL code from DiBcom, which has + * Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +/* USB Driver stuff */ +static struct dvb_usb_properties dibusb_mc_properties; + +static int dibusb_mc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&dibusb_mc_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id dibusb_dib3000mc_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_MOD3001_WARM) }, +/* 02 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_USB2_COLD) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table); + +static struct dvb_usb_properties dibusb_mc_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dibusb-6.0.0.8.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + + .rc_interval = DEFAULT_RC_INTERVAL, + .rc_key_map = dibusb_rc_keys, + .rc_key_map_size = 63, /* FIXME */ + .rc_query = dibusb_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "DiBcom USB2.0 DVB-T reference design (MOD3000P)", + { &dibusb_dib3000mc_table[0], NULL }, + { &dibusb_dib3000mc_table[1], NULL }, + }, + { "Artec T1 USB2.0 TVBOX (please report the warm ID)", + { &dibusb_dib3000mc_table[2], NULL }, + { NULL }, + }, + } +}; + +static struct usb_driver dibusb_mc_driver = { + .owner = THIS_MODULE, + .name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices", + .probe = dibusb_mc_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dibusb_dib3000mc_table, +}; + +/* module stuff */ +static int __init dibusb_mc_module_init(void) +{ + int result; + if ((result = usb_register(&dibusb_mc_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit dibusb_mc_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dibusb_mc_driver); +} + +module_init (dibusb_mc_module_init); +module_exit (dibusb_mc_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for DiBcom USB2.0 DVB-T (DiB3000M-C/P based) devices"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dibusb.h b/drivers/media/dvb/dvb-usb/dibusb.h new file mode 100644 index 00000000000..6611f62977c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dibusb.h @@ -0,0 +1,122 @@ +/* Header file for all dibusb-based-receivers. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DIBUSB_H_ +#define _DVB_USB_DIBUSB_H_ + +#define DVB_USB_LOG_PREFIX "dibusb" +#include "dvb-usb.h" + +#include "dib3000.h" + +/* + * protocol of all dibusb related devices + */ + +/* + * bulk msg to/from endpoint 0x01 + * + * general structure: + * request_byte parameter_bytes + */ + +#define DIBUSB_REQ_START_READ 0x00 +#define DIBUSB_REQ_START_DEMOD 0x01 + +/* + * i2c read + * bulk write: 0x02 ((7bit i2c_addr << 1) & 0x01) register_bytes length_word + * bulk read: byte_buffer (length_word bytes) + */ +#define DIBUSB_REQ_I2C_READ 0x02 + +/* + * i2c write + * bulk write: 0x03 (7bit i2c_addr << 1) register_bytes value_bytes + */ +#define DIBUSB_REQ_I2C_WRITE 0x03 + +/* + * polling the value of the remote control + * bulk write: 0x04 + * bulk read: byte_buffer (5 bytes) + */ +#define DIBUSB_REQ_POLL_REMOTE 0x04 + +/* additional status values for Hauppauge Remote Control Protocol */ +#define DIBUSB_RC_HAUPPAUGE_KEY_PRESSED 0x01 +#define DIBUSB_RC_HAUPPAUGE_KEY_EMPTY 0x03 + +/* streaming mode: + * bulk write: 0x05 mode_byte + * + * mode_byte is mostly 0x00 + */ +#define DIBUSB_REQ_SET_STREAMING_MODE 0x05 + +/* interrupt the internal read loop, when blocking */ +#define DIBUSB_REQ_INTR_READ 0x06 + +/* io control + * 0x07 cmd_byte param_bytes + * + * param_bytes can be up to 32 bytes + * + * cmd_byte function parameter name + * 0x00 power mode + * 0x00 sleep + * 0x01 wakeup + * + * 0x01 enable streaming + * 0x02 disable streaming + * + * + */ +#define DIBUSB_REQ_SET_IOCTL 0x07 + +/* IOCTL commands */ + +/* change the power mode in firmware */ +#define DIBUSB_IOCTL_CMD_POWER_MODE 0x00 +#define DIBUSB_IOCTL_POWER_SLEEP 0x00 +#define DIBUSB_IOCTL_POWER_WAKEUP 0x01 + +/* modify streaming of the FX2 */ +#define DIBUSB_IOCTL_CMD_ENABLE_STREAM 0x01 +#define DIBUSB_IOCTL_CMD_DISABLE_STREAM 0x02 + +struct dibusb_state { + struct dib_fe_xfer_ops ops; + + /* for RC5 remote control */ + int old_toggle; + int last_repeat_count; +}; + +extern struct i2c_algorithm dibusb_i2c_algo; + +extern int dibusb_dib3000mc_frontend_attach(struct dvb_usb_device *); +extern int dibusb_dib3000mc_tuner_attach (struct dvb_usb_device *); + +extern int dibusb_streaming_ctrl(struct dvb_usb_device *, int); +extern int dibusb_pid_filter(struct dvb_usb_device *, int, u16, int); +extern int dibusb_pid_filter_ctrl(struct dvb_usb_device *, int); +extern int dibusb_power_ctrl(struct dvb_usb_device *, int); +extern int dibusb2_0_streaming_ctrl(struct dvb_usb_device *, int); +extern int dibusb2_0_power_ctrl(struct dvb_usb_device *, int); + +#define DEFAULT_RC_INTERVAL 150 +//#define DEFAULT_RC_INTERVAL 100000 + +extern struct dvb_usb_rc_key dibusb_rc_keys[]; +extern int dibusb_rc_query(struct dvb_usb_device *, u32 *, int *); +extern int dibusb_read_eeprom_byte(struct dvb_usb_device *, u8, u8 *); + +#endif diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c new file mode 100644 index 00000000000..5acf3fde952 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -0,0 +1,282 @@ +/* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0 + * receiver + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) and + * Allan Third (allan.third@cs.man.ac.uk) + * + * partly based on the SDK published by Nebula Electronics (TODO do we want this line ?) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "digitv.h" + +#include "mt352.h" +#include "nxt6000.h" + +/* debug */ +int dvb_usb_digitv_debug; +module_param_named(debug,dvb_usb_digitv_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +static int digitv_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 vv, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[7],rcvbuf[7]; + memset(sndbuf,0,7); memset(rcvbuf,0,7); + + sndbuf[0] = cmd; + sndbuf[1] = vv; + sndbuf[2] = wo ? wlen : rlen; + + if (!wo) { + memcpy(&sndbuf[3],wbuf,wlen); + dvb_usb_generic_write(d,sndbuf,7); + } else { + dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); + memcpy(&rbuf,&rcvbuf[3],rlen); + } + return 0; +} + +/* I2C */ +static int digitv_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + /* write/read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + if (digitv_ctrl_msg(d, USB_READ_COFDM, msg[i].buf[0], NULL, 0, + msg[i+1].buf,msg[i+1].len) < 0) + break; + i++; + } else + if (digitv_ctrl_msg(d,USB_WRITE_COFDM, msg[i].buf[0], + &msg[i].buf[1],msg[i].len-1,NULL,0) < 0) + break; + } + + up(&d->i2c_sem); + return i; +} + +static u32 digitv_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm digitv_i2c_algo = { + .name = "Nebula DigiTV USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = digitv_i2c_xfer, + .functionality = digitv_i2c_func, +}; + +/* Callbacks for DVB USB */ +static int digitv_identify_state (struct usb_device *udev, struct + dvb_usb_properties *props, struct dvb_usb_device_description **desc, + int *cold) +{ + *cold = udev->descriptor.iManufacturer == 0 && udev->descriptor.iProduct == 0; + return 0; +} + +static int digitv_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0x38, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; + + static u8 mt352_agc_cfg[] = { 0x68, 0xa0 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0xa0 }; + static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; + static u8 mt352_agc_target[] = { 0x67, 0x20 }; + + static u8 mt352_rs_err_per[] = { 0x7c, 0x00, 0x01 }; + static u8 mt352_snr_select[] = { 0x79, 0x00, 0x20 }; + + static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x05 }; + + static u8 mt352_scan_ctl[] = { 0x88, 0x0f }; + static u8 mt352_capt_range[] = { 0x75, 0x32 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + msleep(1); + mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); + + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); + mt352_write(fe, mt352_agc_target, sizeof(mt352_agc_target)); + + + mt352_write(fe, mt352_rs_err_per, sizeof(mt352_rs_err_per)); + mt352_write(fe, mt352_snr_select, sizeof(mt352_snr_select)); + + mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); + + mt352_write(fe, mt352_scan_ctl, sizeof(mt352_scan_ctl)); + mt352_write(fe, mt352_capt_range, sizeof(mt352_capt_range)); + + return 0; +} + +static struct mt352_config digitv_mt352_config = { + .demod_address = 0x0, /* ignored by the digitv anyway */ + .demod_init = digitv_mt352_demod_init, + .pll_set = NULL, /* TODO */ +}; + +static struct nxt6000_config digitv_nxt6000_config = { + .demod_address = 0x0, /* ignored by the digitv anyway */ + .clock_inversion = 0x0, + + .pll_init = NULL, + .pll_set = NULL, +}; + +static int digitv_frontend_attach(struct dvb_usb_device *d) +{ + if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) == NULL) + return 0; + if ((d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) == NULL) { + + warn("nxt6000 support is not done yet, in fact you are one of the first " + "person who wants to use this device in Linux. Please report to " + "linux-dvb@linuxtv.org"); + + return 0; + } + return -EIO; +} + +static struct dvb_usb_rc_key digitv_rc_keys[] = { + { 0x00, 0x16, KEY_POWER }, /* dummy key */ +}; + +/* TODO is it really the NEC protocol ? */ +int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5]; + + digitv_ctrl_msg(d,USB_READ_REMOTE,0,NULL,0,&key[1],4); + /* TODO state, maybe it is VV ? */ + if (key[1] != 0) + key[0] = 0x01; /* if something is inside the buffer, simulate key press */ + + /* call the universal NEC remote processor, to find out the key's state and event */ + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_rc("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + + +/* DVB USB Driver stuff */ +static struct dvb_usb_properties digitv_properties; + +static int digitv_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&digitv_properties,THIS_MODULE); +} + +static struct usb_device_id digitv_table [] = { + { USB_DEVICE(USB_VID_ANCHOR, USB_PID_NEBULA_DIGITV) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, digitv_table); + +static struct dvb_usb_properties digitv_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-digitv-01.fw", + + .size_of_priv = 0, + + .streaming_ctrl = NULL, + .pid_filter = NULL, + .pid_filter_ctrl = NULL, + .power_ctrl = NULL, + .frontend_attach = digitv_frontend_attach, + .tuner_attach = NULL, // digitv_tuner_attach, + .read_mac_address = NULL, + + .rc_interval = 1000, + .rc_key_map = digitv_rc_keys, + .rc_key_map_size = ARRAY_SIZE(digitv_rc_keys), + .rc_query = digitv_rc_query, + + .identify_state = digitv_identify_state, + + .i2c_algo = &digitv_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { "Nebula Electronics uDigiTV DVB-T USB2.0)", + { &digitv_table[0], NULL }, + { NULL }, + }, + } +}; + +static struct usb_driver digitv_driver = { + .owner = THIS_MODULE, + .name = "Nebula Electronics uDigiTV DVB-T USB2.0 device", + .probe = digitv_probe, + .disconnect = dvb_usb_device_exit, + .id_table = digitv_table, +}; + +/* module stuff */ +static int __init digitv_module_init(void) +{ + int result; + if ((result = usb_register(&digitv_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit digitv_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&digitv_driver); +} + +module_init (digitv_module_init); +module_exit (digitv_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Nebula Electronics uDigiTV DVB-T USB2.0"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/digitv.h b/drivers/media/dvb/dvb-usb/digitv.h new file mode 100644 index 00000000000..477ee428a70 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/digitv.h @@ -0,0 +1,65 @@ +#ifndef _DVB_USB_DIGITV_H_ +#define _DVB_USB_DIGITV_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +extern int dvb_usb_digitv_debug; +#define deb_rc(args...) dprintk(dvb_usb_digitv_debug,0x01,args) + +/* protocol (from usblogging and the SDK: + * + * Always 7 bytes bulk message(s) for controlling + * + * First byte describes the command. Reads are 2 consecutive transfer (as always). + * + * General structure: + * + * write or first message of a read: + * <cmdbyte> VV <len> B0 B1 B2 B3 + * + * second message of a read + * <cmdbyte> VV <len> R0 R1 R2 R3 + * + * whereas 0 < len <= 4 + * + * I2C address is stored somewhere inside the device. + * + * 0x01 read from EEPROM + * VV = offset; B* = 0; R* = value(s) + * + * 0x02 read register of the COFDM + * VV = register; B* = 0; R* = value(s) + * + * 0x05 write register of the COFDM + * VV = register; B* = value(s); + * + * 0x06 write to the tuner (only for NXT6000) + * VV = 0; B* = PLL data; len = 4; + * + * 0x03 read remote control + * VV = 0; B* = 0; len = 4; R* = key + * + * 0x07 write to the remote (don't know why one should this, resetting ?) + * VV = 0; B* = key; len = 4; + * + * 0x08 write remote type + * VV = 0; B[0] = 0x01, len = 4 + * + * 0x09 write device init + * TODO + */ +#define USB_READ_EEPROM 1 + +#define USB_READ_COFDM 2 +#define USB_WRITE_COFDM 5 + +#define USB_WRITE_TUNER 6 + +#define USB_READ_REMOTE 3 +#define USB_WRITE_REMOTE 7 +#define USB_WRITE_REMOTE_TYPE 8 + +#define USB_DEV_INIT 9 + +#endif diff --git a/drivers/media/dvb/dvb-usb/dtt200u-fe.c b/drivers/media/dvb/dvb-usb/dtt200u-fe.c new file mode 100644 index 00000000000..d17d768038c --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtt200u-fe.c @@ -0,0 +1,206 @@ +/* Frontend part of the Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. + * + * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dtt200u.h" + +struct dtt200u_fe_state { + struct dvb_usb_device *d; + + struct dvb_frontend_parameters fep; + struct dvb_frontend frontend; +}; + +#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what) + +static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_TUNE_STAT; + u8 br[3] = { 0 }; +// u8 bdeb[5] = { 0 }; + + dvb_usb_generic_rw(state->d,&bw,1,br,3,0); + switch (br[0]) { + case 0x01: + *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + break; + case 0x00: + *stat = 0; + break; + default: + moan("br[0]",GET_TUNE_STAT); + break; + } + +// bw[0] = 0x88; +// dvb_usb_generic_rw(state->d,bw,1,bdeb,5,0); + +// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]); + + return 0; +} +static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_BER; + *ber = 0; + dvb_usb_generic_rw(state->d,&bw,1,(u8*) ber,3,0); + return 0; +} + +static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_UNK; + *unc = 0; + dvb_usb_generic_rw(state->d,&bw,1,(u8*) unc,3,0); + return 0; +} + +static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_SIG_STRENGTH, b; + dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); + *strength = (b << 8) | b; + return 0; +} + +static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 bw = GET_SNR,br; + dvb_usb_generic_rw(state->d,&bw,1,&br,1,0); + *snr = ~((br << 8) | br); + return 0; +} + +static int dtt200u_fe_init(struct dvb_frontend* fe) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u8 b = RESET_DEMOD; + return dvb_usb_generic_write(state->d,&b,1); +} + +static int dtt200u_fe_sleep(struct dvb_frontend* fe) +{ + return dtt200u_fe_init(fe); +} + +static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1500; + tune->step_size = 166667; + tune->max_drift = 166667 * 2; + return 0; +} + +static int dtt200u_fe_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + u16 freq = fep->frequency / 250000; + u8 bw,bwbuf[2] = { SET_BANDWIDTH, 0 }, freqbuf[3] = { SET_FREQUENCY, 0, 0 }; + + switch (fep->u.ofdm.bandwidth) { + case BANDWIDTH_8_MHZ: bw = 8; break; + case BANDWIDTH_7_MHZ: bw = 7; break; + case BANDWIDTH_6_MHZ: bw = 6; break; + case BANDWIDTH_AUTO: return -EOPNOTSUPP; + default: + return -EINVAL; + } + deb_info("set_frontend\n"); + + bwbuf[1] = bw; + dvb_usb_generic_write(state->d,bwbuf,2); + + freqbuf[1] = freq & 0xff; + freqbuf[2] = (freq >> 8) & 0xff; + dvb_usb_generic_write(state->d,freqbuf,3); + + memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters)); + + return 0; +} + +static int dtt200u_fe_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct dtt200u_fe_state *state = fe->demodulator_priv; + memcpy(fep,&state->fep,sizeof(struct dvb_frontend_parameters)); + return 0; +} + +static void dtt200u_fe_release(struct dvb_frontend* fe) +{ + struct dtt200u_fe_state *state = (struct dtt200u_fe_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops dtt200u_fe_ops; + +struct dvb_frontend* dtt200u_fe_attach(struct dvb_usb_device *d) +{ + struct dtt200u_fe_state* state = NULL; + + /* allocate memory for the internal state */ + state = (struct dtt200u_fe_state*) kmalloc(sizeof(struct dtt200u_fe_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(struct dtt200u_fe_state)); + + deb_info("attaching frontend dtt200u\n"); + + state->d = d; + + state->frontend.ops = &dtt200u_fe_ops; + state->frontend.demodulator_priv = state; + + goto success; +error: + return NULL; +success: + return &state->frontend; +} + +static struct dvb_frontend_ops dtt200u_fe_ops = { + .info = { + .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T", + .type = FE_OFDM, + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 250000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = dtt200u_fe_release, + + .init = dtt200u_fe_init, + .sleep = dtt200u_fe_sleep, + + .set_frontend = dtt200u_fe_set_frontend, + .get_frontend = dtt200u_fe_get_frontend, + .get_tune_settings = dtt200u_fe_get_tune_settings, + + .read_status = dtt200u_fe_read_status, + .read_ber = dtt200u_fe_read_ber, + .read_signal_strength = dtt200u_fe_read_signal_strength, + .read_snr = dtt200u_fe_read_snr, + .read_ucblocks = dtt200u_fe_read_unc_blocks, +}; diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c new file mode 100644 index 00000000000..fb2b5a2da13 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -0,0 +1,171 @@ +/* DVB USB library compliant Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dtt200u.h" + +/* debug */ +int dvb_usb_dtt200u_debug; +module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); + +static int dtt200u_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b_streaming[2] = { SET_TS_CTRL, onoff }; + u8 b_rst_pid = RESET_PID_FILTER; + + dvb_usb_generic_write(d,b_streaming,2); + + if (!onoff) + dvb_usb_generic_write(d,&b_rst_pid,1); + return 0; +} + +static int dtt200u_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int onoff) +{ + u8 b_pid[4]; + pid = onoff ? pid : 0; + + b_pid[0] = SET_PID_FILTER; + b_pid[1] = index; + b_pid[2] = pid & 0xff; + b_pid[3] = (pid >> 8) & 0xff; + + return dvb_usb_generic_write(d,b_pid,4); +} + +/* remote control */ +/* key list for the tiny remote control (Yakumo, don't know about the others) */ +static struct dvb_usb_rc_key dtt200u_rc_keys[] = { + { 0x80, 0x01, KEY_MUTE }, + { 0x80, 0x02, KEY_CHANNELDOWN }, + { 0x80, 0x03, KEY_VOLUMEDOWN }, + { 0x80, 0x04, KEY_1 }, + { 0x80, 0x05, KEY_2 }, + { 0x80, 0x06, KEY_3 }, + { 0x80, 0x07, KEY_4 }, + { 0x80, 0x08, KEY_5 }, + { 0x80, 0x09, KEY_6 }, + { 0x80, 0x0a, KEY_7 }, + { 0x00, 0x0c, KEY_ZOOM }, + { 0x80, 0x0d, KEY_0 }, + { 0x00, 0x0e, KEY_SELECT }, + { 0x80, 0x12, KEY_POWER }, + { 0x80, 0x1a, KEY_CHANNELUP }, + { 0x80, 0x1b, KEY_8 }, + { 0x80, 0x1e, KEY_VOLUMEUP }, + { 0x80, 0x1f, KEY_9 }, +}; + +static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd = GET_RC_KEY; + dvb_usb_generic_rw(d,&cmd,1,key,5,0); + dvb_usb_nec_rc_key_to_event(d,key,event,state); + if (key[0] != 0) + deb_info("key: %x %x %x %x %x\n",key[0],key[1],key[2],key[3],key[4]); + return 0; +} + +static int dtt200u_frontend_attach(struct dvb_usb_device *d) +{ + d->fe = dtt200u_fe_attach(d); + return 0; +} + +static struct dvb_usb_properties dtt200u_properties; + +static int dtt200u_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE); +} + +static struct usb_device_id dtt200u_usb_table [] = { + { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_COLD) }, + { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); + +static struct dvb_usb_properties dtt200u_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, + .pid_filter_count = 255, /* It is a guess, but there are at least 10 */ + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-dtt200u-01.fw", + + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + + .rc_interval = 200, + .rc_key_map = dtt200u_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), + .rc_query = dtt200u_rc_query, + + .generic_bulk_ctrl_endpoint = 0x01, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "Yakumo/Hama/Typhoon DVB-T USB2.0)", + .cold_ids = { &dtt200u_usb_table[0], &dtt200u_usb_table[2] }, + .warm_ids = { &dtt200u_usb_table[1], NULL }, + }, + { 0 }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver dtt200u_usb_driver = { + .owner = THIS_MODULE, + .name = "Yakumo/Hama/Typhoon DVB-T USB2.0", + .probe = dtt200u_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = dtt200u_usb_table, +}; + +/* module stuff */ +static int __init dtt200u_usb_module_init(void) +{ + int result; + if ((result = usb_register(&dtt200u_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit dtt200u_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&dtt200u_usb_driver); +} + +module_init(dtt200u_usb_module_init); +module_exit(dtt200u_usb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for the Yakumo/Hama/Typhoon DVB-T USB2.0 device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h new file mode 100644 index 00000000000..ed414207151 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dtt200u.h @@ -0,0 +1,66 @@ +/* Common header file of Linux driver for the Yakumo/Hama/Typhoon DVB-T + * USB2.0 receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_DTT200U_H_ +#define _DVB_USB_DTT200U_H_ + +#define DVB_USB_LOG_PREFIX "dtt200u" +#include "dvb-usb.h" + +extern int dvb_usb_dtt200u_debug; +#define deb_info(args...) dprintk(dvb_usb_dtt200u_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_dtt200u_debug,0x02,args) + +/* guessed protocol description (reverse engineered): + * read + * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 + * 81 - <TS_LOCK> <current frequency divided by 250000> + * 82 - crash - do not touch + * 83 - crash - do not touch + * 84 - remote control + * 85 - crash - do not touch (OK, stop testing here) + * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) + * 89 - noise-to-signal + * 8a - unkown 1 byte - signal_strength + * 8c - ber ??? + * 8d - ber + * 8e - unc + */ + +#define GET_SPEED 0x00 +#define GET_TUNE_STAT 0x81 +#define GET_RC_KEY 0x84 +#define GET_STATUS 0x88 +#define GET_SNR 0x89 +#define GET_SIG_STRENGTH 0x8a +#define GET_UNK 0x8c +#define GET_BER 0x8d +#define GET_UNC 0x8e + +/* write + * 01 - reset the demod + * 02 - frequency (divided by 250000) + * 03 - bandwidth + * 04 - pid table (index pid(7:0) pid(12:8)) + * 05 - reset the pid table + * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) + */ + +#define RESET_DEMOD 0x01 +#define SET_FREQUENCY 0x02 +#define SET_BANDWIDTH 0x03 +#define SET_PID_FILTER 0x04 +#define RESET_PID_FILTER 0x05 +#define SET_TS_CTRL 0x08 + +extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h new file mode 100644 index 00000000000..67e0d73fbce --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -0,0 +1,44 @@ +/* dvb-usb-common.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * a header file containing prototypes and types for internal use of the dvb-usb-lib + */ +#ifndef _DVB_USB_COMMON_H_ +#define _DVB_USB_COMMON_H_ + +#define DVB_USB_LOG_PREFIX "dvb-usb" +#include "dvb-usb.h" + +extern int dvb_usb_debug; + +#define deb_info(args...) dprintk(dvb_usb_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_debug,0x02,args) +#define deb_pll(args...) dprintk(dvb_usb_debug,0x04,args) +#define deb_ts(args...) dprintk(dvb_usb_debug,0x08,args) +#define deb_err(args...) dprintk(dvb_usb_debug,0x10,args) +#define deb_rc(args...) dprintk(dvb_usb_debug,0x20,args) +#define deb_fw(args...) dprintk(dvb_usb_debug,0x40,args) + +/* commonly used methods */ +extern int usb_cypress_load_firmware(struct usb_device *, const char *, int); + +extern int dvb_usb_urb_submit(struct dvb_usb_device *); +extern int dvb_usb_urb_kill(struct dvb_usb_device *); +extern int dvb_usb_urb_init(struct dvb_usb_device *); +extern int dvb_usb_urb_exit(struct dvb_usb_device *); + +extern int dvb_usb_i2c_init(struct dvb_usb_device *); +extern int dvb_usb_i2c_exit(struct dvb_usb_device *); + +extern int dvb_usb_dvb_init(struct dvb_usb_device *); +extern int dvb_usb_dvb_exit(struct dvb_usb_device *); + +extern int dvb_usb_fe_init(struct dvb_usb_device *); +extern int dvb_usb_fe_exit(struct dvb_usb_device *); + +extern int dvb_usb_remote_init(struct dvb_usb_device *); +extern int dvb_usb_remote_exit(struct dvb_usb_device *); + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c new file mode 100644 index 00000000000..bdd72f77970 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -0,0 +1,210 @@ +/* dvb-usb-dvb.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing and handling the + * linux-dvb API. + */ +#include "dvb-usb-common.h" + +static int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + struct dvb_usb_device *d = dvbdmxfeed->demux->priv; + int newfeedcount,ret; + + if (d == NULL) + return -ENODEV; + + newfeedcount = d->feedcount + (onoff ? 1 : -1); + + /* + * stop feed before setting a new pid if there will be no pid anymore + */ + if (newfeedcount == 0) { + deb_ts("stop feeding\n"); + + if (d->props.streaming_ctrl != NULL) + if ((ret = d->props.streaming_ctrl(d,0))) + err("error while stopping stream."); + + dvb_usb_urb_kill(d); + } + + d->feedcount = newfeedcount; + + /* activate the pid on the device specific pid_filter */ + deb_ts("setting pid: %5d %04x at index %d '%s'\n",dvbdmxfeed->pid,dvbdmxfeed->pid,dvbdmxfeed->index,onoff ? "on" : "off"); + if (d->props.caps & DVB_USB_HAS_PID_FILTER && + d->pid_filtering && + d->props.pid_filter != NULL) + d->props.pid_filter(d,dvbdmxfeed->index,dvbdmxfeed->pid,onoff); + + /* start the feed if this was the first feed and there is still a feed + * for reception. + */ + if (d->feedcount == onoff && d->feedcount > 0) { + + deb_ts("controlling pid parser\n"); + if (d->props.caps & DVB_USB_HAS_PID_FILTER && + d->props.caps & DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF && + d->props.pid_filter_ctrl != NULL) + if (d->props.pid_filter_ctrl(d,d->pid_filtering) < 0) + err("could not handle pid_parser"); + + deb_ts("start feeding\n"); + if (d->props.streaming_ctrl != NULL) + if (d->props.streaming_ctrl(d,1)) { + err("error while enabling fifo."); + return -ENODEV; + } + + dvb_usb_urb_submit(d); + } + return 0; +} + +static int dvb_usb_start_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("start pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid,dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,1); +} + +static int dvb_usb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) +{ + deb_ts("stop pid: 0x%04x, feedtype: %d\n", dvbdmxfeed->pid, dvbdmxfeed->type); + return dvb_usb_ctrl_feed(dvbdmxfeed,0); +} + +int dvb_usb_dvb_init(struct dvb_usb_device *d) +{ + int ret; + + if ((ret = dvb_register_adapter(&d->dvb_adap, d->desc->name, + d->owner)) < 0) { + deb_info("dvb_register_adapter failed: error %d", ret); + goto err; + } + d->dvb_adap.priv = d; + + if (d->props.read_mac_address) { + if (d->props.read_mac_address(d,d->dvb_adap.proposed_mac) == 0) + info("MAC address: %02x:%02x:%02x:%02x:%02x:%02x",d->dvb_adap.proposed_mac[0], + d->dvb_adap.proposed_mac[1],d->dvb_adap.proposed_mac[2], + d->dvb_adap.proposed_mac[3],d->dvb_adap.proposed_mac[4], + d->dvb_adap.proposed_mac[5]); + else + err("MAC address reading failed."); + } + + + d->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; + d->demux.priv = d; + + d->demux.feednum = d->demux.filternum = d->max_feed_count; + d->demux.start_feed = dvb_usb_start_feed; + d->demux.stop_feed = dvb_usb_stop_feed; + d->demux.write_to_decoder = NULL; + if ((ret = dvb_dmx_init(&d->demux)) < 0) { + err("dvb_dmx_init failed: error %d",ret); + goto err_dmx; + } + + d->dmxdev.filternum = d->demux.filternum; + d->dmxdev.demux = &d->demux.dmx; + d->dmxdev.capabilities = 0; + if ((ret = dvb_dmxdev_init(&d->dmxdev, &d->dvb_adap)) < 0) { + err("dvb_dmxdev_init failed: error %d",ret); + goto err_dmx_dev; + } + + dvb_net_init(&d->dvb_adap, &d->dvb_net, &d->demux.dmx); + + goto success; +err_dmx_dev: + dvb_dmx_release(&d->demux); +err_dmx: + dvb_unregister_adapter(&d->dvb_adap); +err: + return ret; +success: + d->state |= DVB_USB_STATE_DVB; + return 0; +} + +int dvb_usb_dvb_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_DVB) { + deb_info("unregistering DVB part\n"); + dvb_net_release(&d->dvb_net); + d->demux.dmx.close(&d->demux.dmx); + dvb_dmxdev_release(&d->dmxdev); + dvb_dmx_release(&d->demux); + dvb_unregister_adapter(&d->dvb_adap); + d->state &= ~DVB_USB_STATE_DVB; + } + return 0; +} + +static int dvb_usb_fe_wakeup(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + if (d->props.power_ctrl) + d->props.power_ctrl(d,1); + + if (d->fe_init) + d->fe_init(fe); + + return 0; +} + +static int dvb_usb_fe_sleep(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + if (d->fe_sleep) + d->fe_sleep(fe); + + if (d->props.power_ctrl) + d->props.power_ctrl(d,0); + + return 0; +} + +int dvb_usb_fe_init(struct dvb_usb_device* d) +{ + if (d->props.frontend_attach == NULL) { + err("strange '%s' don't want to attach a frontend.",d->desc->name); + return 0; + } + + d->props.frontend_attach(d); + + /* re-assign sleep and wakeup functions */ + if (d->fe != NULL) { + d->fe_init = d->fe->ops->init; d->fe->ops->init = dvb_usb_fe_wakeup; + d->fe_sleep = d->fe->ops->sleep; d->fe->ops->sleep = dvb_usb_fe_sleep; + + if (dvb_register_frontend(&d->dvb_adap, d->fe)) { + err("Frontend registration failed."); + if (d->fe->ops->release) + d->fe->ops->release(d->fe); + d->fe = NULL; + return -ENODEV; + } + } else + err("no frontend was attached by '%s'",d->desc->name); + + if (d->props.tuner_attach != NULL) + d->props.tuner_attach(d); + + return 0; +} + +int dvb_usb_fe_exit(struct dvb_usb_device *d) +{ + if (d->fe != NULL) + dvb_unregister_frontend(d->fe); + return 0; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c new file mode 100644 index 00000000000..5244e39770a --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -0,0 +1,100 @@ +/* dvb-usb-firmware.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for downloading the firmware to Cypress FX 1 and 2 based devices. + * + * FIXME: This part does actually not belong to dvb-usb, but to the usb-subsystem. + */ +#include "dvb-usb-common.h" + +#include <linux/firmware.h> +#include <linux/usb.h> + +struct usb_cypress_controller { + int id; + const char *name; /* name of the usb controller */ + u16 cpu_cs_register; /* needs to be restarted, when the firmware has been downloaded. */ +}; + +static struct usb_cypress_controller cypress[] = { + { .id = CYPRESS_AN2135, .name = "Cypress AN2135", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_AN2235, .name = "Cypress AN2235", .cpu_cs_register = 0x7f92 }, + { .id = CYPRESS_FX2, .name = "Cypress FX2", .cpu_cs_register = 0xe600 }, +}; + +/* + * load a firmware packet to the device + */ +static int usb_cypress_writemem(struct usb_device *udev,u16 addr,u8 *data, u8 len) +{ + return usb_control_msg(udev, usb_sndctrlpipe(udev,0), + 0xa0, USB_TYPE_VENDOR, addr, 0x00, data, len, 5*HZ); +} + +int usb_cypress_load_firmware(struct usb_device *udev, const char *filename, int type) +{ + const struct firmware *fw = NULL; + u16 addr; + u8 *b,*p; + int ret = 0,i; + + if ((ret = request_firmware(&fw, filename, &udev->dev)) != 0) { + err("did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details on firmware-problems.", + filename); + return ret; + } + + info("downloading firmware from file '%s' to the '%s'",filename,cypress[type].name); + + p = kmalloc(fw->size,GFP_KERNEL); + if (p != NULL) { + u8 reset; + /* + * you cannot use the fw->data as buffer for + * usb_control_msg, a new buffer has to be + * created + */ + memcpy(p,fw->data,fw->size); + + /* stop the CPU */ + reset = 1; + if ((ret = usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1)) != 1) + err("could not stop the USB controller CPU."); + for(i = 0; p[i+3] == 0 && i < fw->size; ) { + b = (u8 *) &p[i]; + addr = cpu_to_le16( *((u16 *) &b[1]) ); + + deb_fw("writing to address 0x%04x (buffer: 0x%02x%02x)\n",addr,b[1],b[2]); + + ret = usb_cypress_writemem(udev,addr,&b[4],b[0]); + + if (ret != b[0]) { + err("error while transferring firmware " + "(transferred size: %d, block size: %d)", + ret,b[0]); + ret = -EINVAL; + break; + } + i += 5 + b[0]; + } + /* length in ret */ + if (ret > 0) + ret = 0; + /* restart the CPU */ + reset = 0; + if (ret || usb_cypress_writemem(udev,cypress[type].cpu_cs_register,&reset,1) != 1) { + err("could not restart the USB controller CPU."); + ret = -EINVAL; + } + + kfree(p); + } else { + ret = -ENOMEM; + } + release_firmware(fw); + + return ret; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c new file mode 100644 index 00000000000..9f0a8d90d14 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-i2c.c @@ -0,0 +1,118 @@ +/* dvb-usb-i2c.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for (de-)initializing an I2C adapter. + */ +#include "dvb-usb-common.h" + +int dvb_usb_i2c_init(struct dvb_usb_device *d) +{ + int ret = 0; + + if (!(d->props.caps & DVB_USB_IS_AN_I2C_ADAPTER)) + return 0; + + if (d->props.i2c_algo == NULL) { + err("no i2c algorithm specified"); + return -EINVAL; + } + + strncpy(d->i2c_adap.name,d->desc->name,I2C_NAME_SIZE); +#ifdef I2C_ADAP_CLASS_TV_DIGITAL + d->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL, +#else + d->i2c_adap.class = I2C_CLASS_TV_DIGITAL, +#endif + d->i2c_adap.algo = d->props.i2c_algo; + d->i2c_adap.algo_data = NULL; + d->i2c_adap.id = I2C_ALGO_BIT; + + i2c_set_adapdata(&d->i2c_adap, d); + + if ((ret = i2c_add_adapter(&d->i2c_adap)) < 0) + err("could not add i2c adapter"); + + d->state |= DVB_USB_STATE_I2C; + + return ret; +} + +int dvb_usb_i2c_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_I2C) + i2c_del_adapter(&d->i2c_adap); + d->state &= ~DVB_USB_STATE_I2C; + return 0; +} + +int dvb_usb_pll_init_i2c(struct dvb_frontend *fe) +{ + struct dvb_usb_device *d = fe->dvb->priv; + struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0, .buf = d->pll_init, .len = 4 }; + int ret = 0; + + /* if there is nothing to initialize */ + if (d->pll_init[0] == 0x00 && d->pll_init[1] == 0x00 && + d->pll_init[2] == 0x00 && d->pll_init[3] == 0x00) + return 0; + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,1,d->pll_addr); + + deb_pll("pll init: %x\n",d->pll_addr); + deb_pll("pll-buf: %x %x %x %x\n",d->pll_init[0],d->pll_init[1], + d->pll_init[2],d->pll_init[3]); + + if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed for pll_init."); + ret = -EREMOTEIO; + } + msleep(1); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,0,d->pll_addr); + return ret; +} +EXPORT_SYMBOL(dvb_usb_pll_init_i2c); + +int dvb_usb_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep, u8 b[5]) +{ + struct dvb_usb_device *d = fe->dvb->priv; + + deb_pll("pll addr: %x, freq: %d %p\n",d->pll_addr,fep->frequency,d->pll_desc); + + b[0] = d->pll_addr << 1; + dvb_pll_configure(d->pll_desc,&b[1],fep->frequency,fep->u.ofdm.bandwidth); + + deb_pll("pll-buf: %x %x %x %x %x\n",b[0],b[1],b[2],b[3],b[4]); + + return 0; +} +EXPORT_SYMBOL(dvb_usb_pll_set); + +int dvb_usb_pll_set_i2c(struct dvb_frontend *fe, struct dvb_frontend_parameters *fep) +{ + struct dvb_usb_device *d = fe->dvb->priv; + int ret = 0; + u8 b[5]; + struct i2c_msg msg = { .addr = d->pll_addr, .flags = 0, .buf = &b[1], .len = 4 }; + + dvb_usb_pll_set(fe,fep,b); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,1,d->pll_addr); + + if (i2c_transfer (&d->i2c_adap, &msg, 1) != 1) { + err("tuner i2c write failed for pll_set."); + ret = -EREMOTEIO; + } + msleep(1); + + if (d->tuner_pass_ctrl) + d->tuner_pass_ctrl(fe,0,d->pll_addr); + + return ret; +} +EXPORT_SYMBOL(dvb_usb_pll_set_i2c); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h new file mode 100644 index 00000000000..bcb34191868 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -0,0 +1,83 @@ +/* dvb-usb-ids.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) see + * dvb-usb-init.c for copyright information. + * + * a header file containing define's for the USB device supported by the + * various drivers. + */ +#ifndef _DVB_USB_IDS_H_ +#define _DVB_USB_IDS_H_ + +/* Vendor IDs */ +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_AVERMEDIA_UNK 0x14aa +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 + +/* Product IDs */ +#define USB_PID_ADSTECH_USB2_COLD 0xa333 +#define USB_PID_ADSTECH_USB2_WARM 0xa334 +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 +#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 +#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 +#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_KWORLD_VSTREAM_COLD 0x17de +#define USB_PID_KWORLD_VSTREAM_WARM 0x17df +#define USB_PID_TWINHAN_VP7041_COLD 0x3201 +#define USB_PID_TWINHAN_VP7041_WARM 0x3202 +#define USB_PID_TWINHAN_VP7045_COLD 0x3205 +#define USB_PID_TWINHAN_VP7045_WARM 0x3206 +#define USB_PID_DNTV_TINYUSB2_COLD 0x3223 +#define USB_PID_DNTV_TINYUSB2_WARM 0x3224 +#define USB_PID_TWINHAN_VP7021_COLD 0x3207 +#define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 +#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_DTT200U_COLD 0x0201 +#define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_NEBULA_DIGITV 0x0201 +#define USB_PID_DVICO_BLUEBIRD_LGZ201 0xdb00 +#define USB_PID_DVICO_BLUEBIRD_TH7579 0xdb10 +#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_1 0xdb01 +#define USB_PID_DVICO_BLUEBIRD_TH7579_2 0xdb11 + + +#endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c new file mode 100644 index 00000000000..3aadec974cf --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -0,0 +1,211 @@ +/* + * DVB USB library - provides a generic interface for a DVB USB device driver. + * + * dvb-usb-init.c + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dvb-usb-common.h" + +/* debug */ +int dvb_usb_debug; +module_param_named(debug,dvb_usb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); + +/* general initialization functions */ +int dvb_usb_exit(struct dvb_usb_device *d) +{ + deb_info("state before exiting everything: %x\n",d->state); + dvb_usb_remote_exit(d); + dvb_usb_fe_exit(d); + dvb_usb_i2c_exit(d); + dvb_usb_dvb_exit(d); + dvb_usb_urb_exit(d); + deb_info("state should be zero now: %x\n",d->state); + d->state = DVB_USB_STATE_INIT; + kfree(d->priv); + kfree(d); + return 0; +} + +static int dvb_usb_init(struct dvb_usb_device *d) +{ + int ret = 0; + + sema_init(&d->usb_sem, 1); + sema_init(&d->i2c_sem, 1); + + d->state = DVB_USB_STATE_INIT; + +/* check the capabilites and set appropriate variables */ + +/* speed - when running at FULL speed we need a HW PID filter */ + if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) { + err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a HW PID filter)"); + return -ENODEV; + } + + if ((d->udev->speed == USB_SPEED_FULL && d->props.caps & DVB_USB_HAS_PID_FILTER) || + (d->props.caps & DVB_USB_NEED_PID_FILTERING)) { + info("will use the device's hw PID filter."); + d->pid_filtering = 1; + d->max_feed_count = d->props.pid_filter_count; + } else { + info("will pass the complete MPEG2 transport stream to the demuxer."); + d->pid_filtering = 0; + d->max_feed_count = 255; + } + + if (d->props.power_ctrl) + d->props.power_ctrl(d,1); + + if ((ret = dvb_usb_urb_init(d)) || + (ret = dvb_usb_dvb_init(d)) || + (ret = dvb_usb_i2c_init(d)) || + (ret = dvb_usb_fe_init(d))) { + dvb_usb_exit(d); + return ret; + } + + if ((ret = dvb_usb_remote_init(d))) + err("could not initialize remote control."); + + if (d->props.power_ctrl) + d->props.power_ctrl(d,0); + + return 0; +} + +/* determine the name and the state of the just found USB device */ +static struct dvb_usb_device_description * dvb_usb_find_device(struct usb_device *udev,struct dvb_usb_properties *props, int *cold) +{ + int i,j; + struct dvb_usb_device_description *desc = NULL; + *cold = -1; + + for (i = 0; i < props->num_device_descs; i++) { + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].cold_ids[j] != NULL; j++) { + deb_info("check for cold %x %x\n",props->devices[i].cold_ids[j]->idVendor, props->devices[i].cold_ids[j]->idProduct); + if (props->devices[i].cold_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].cold_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 1; + desc = &props->devices[i]; + break; + } + } + + if (desc != NULL) + break; + + for (j = 0; j < DVB_USB_ID_MAX_NUM && props->devices[i].warm_ids[j] != NULL; j++) { + deb_info("check for warm %x %x\n",props->devices[i].warm_ids[j]->idVendor, props->devices[i].warm_ids[j]->idProduct); + if (props->devices[i].warm_ids[j]->idVendor == le16_to_cpu(udev->descriptor.idVendor) && + props->devices[i].warm_ids[j]->idProduct == le16_to_cpu(udev->descriptor.idProduct)) { + *cold = 0; + desc = &props->devices[i]; + break; + } + } + } + + if (desc != NULL && props->identify_state != NULL) + props->identify_state(udev,props,&desc,cold); + + return desc; +} + +/* + * USB + */ +int dvb_usb_device_init(struct usb_interface *intf, struct dvb_usb_properties *props, struct module *owner) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct dvb_usb_device *d = NULL; + struct dvb_usb_device_description *desc = NULL; + + int ret = -ENOMEM,cold=0; + + if ((desc = dvb_usb_find_device(udev,props,&cold)) == NULL) { + deb_err("something went very wrong, device was not found in current device list - let's see what comes next.\n"); + return -ENODEV; + } + + if (cold) { + info("found a '%s' in cold state, will try to load a firmware",desc->name); + ret = usb_cypress_load_firmware(udev,props->firmware,props->usb_ctrl); + } else { + info("found a '%s' in warm state.",desc->name); + d = kmalloc(sizeof(struct dvb_usb_device),GFP_KERNEL); + if (d == NULL) { + err("no memory for 'struct dvb_usb_device'"); + return ret; + } + memset(d,0,sizeof(struct dvb_usb_device)); + + d->udev = udev; + memcpy(&d->props,props,sizeof(struct dvb_usb_properties)); + d->desc = desc; + d->owner = owner; + + if (d->props.size_of_priv > 0) { + d->priv = kmalloc(d->props.size_of_priv,GFP_KERNEL); + if (d->priv == NULL) { + err("no memory for priv in 'struct dvb_usb_device'"); + kfree(d); + return -ENOMEM; + } + memset(d->priv,0,d->props.size_of_priv); + } + + usb_set_intfdata(intf, d); + + ret = dvb_usb_init(d); + } + + if (ret == 0) + info("%s successfully initialized and connected.",desc->name); + else + info("%s error while loading driver (%d)",desc->name,ret); + return ret; +} +EXPORT_SYMBOL(dvb_usb_device_init); + +void dvb_usb_device_exit(struct usb_interface *intf) +{ + struct dvb_usb_device *d = usb_get_intfdata(intf); + const char *name = "generic DVB-USB module"; + + usb_set_intfdata(intf,NULL); + if (d != NULL && d->desc != NULL) { + name = d->desc->name; + dvb_usb_exit(d); + } + info("%s successfully deinitialized and disconnected.",name); + +} +EXPORT_SYMBOL(dvb_usb_device_exit); + +/* module stuff */ +static int __init dvb_usb_module_init(void) +{ + return 0; +} + +static void __exit dvb_usb_module_exit(void) +{ +} + +module_init (dvb_usb_module_init); +module_exit (dvb_usb_module_exit); + +MODULE_VERSION("0.3"); +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("A library module containing commonly used USB and DVB function USB DVB devices"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c new file mode 100644 index 00000000000..9f1e23f82ba --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -0,0 +1,175 @@ +/* dvb-usb-remote.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing the the input-device and for handling remote-control-queries. + */ +#include "dvb-usb-common.h" + +/* Remote-control poll function - called every dib->rc_query_interval ms to see + * whether the remote control has received anything. + * + * TODO: Fix the repeat rate of the input device. + */ +static void dvb_usb_read_remote_control(void *data) +{ + struct dvb_usb_device *d = data; + u32 event; + int state; + + /* TODO: need a lock here. We can simply skip checking for the remote control + if we're busy. */ + + if (d->props.rc_query(d,&event,&state)) { + err("error while querying for an remote control event."); + goto schedule; + } + + + switch (state) { + case REMOTE_NO_KEY_PRESSED: + break; + case REMOTE_KEY_PRESSED: + deb_rc("key pressed\n"); + d->last_event = event; + case REMOTE_KEY_REPEAT: + deb_rc("key repeated\n"); + input_event(&d->rc_input_dev, EV_KEY, event, 1); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(&d->rc_input_dev); + break; + default: + break; + } + +/* improved repeat handling ??? + switch (state) { + case REMOTE_NO_KEY_PRESSED: + deb_rc("NO KEY PRESSED\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("releasing event %d\n",d->last_event); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); + input_sync(&d->rc_input_dev); + } + d->last_state = REMOTE_NO_KEY_PRESSED; + d->last_event = 0; + break; + case REMOTE_KEY_PRESSED: + deb_rc("KEY PRESSED\n"); + deb_rc("pressing event %d\n",event); + + input_event(&d->rc_input_dev, EV_KEY, event, 1); + input_sync(&d->rc_input_dev); + + d->last_event = event; + d->last_state = REMOTE_KEY_PRESSED; + break; + case REMOTE_KEY_REPEAT: + deb_rc("KEY_REPEAT\n"); + if (d->last_state != REMOTE_NO_KEY_PRESSED) { + deb_rc("repeating event %d\n",d->last_event); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 2); + input_sync(&d->rc_input_dev); + d->last_state = REMOTE_KEY_REPEAT; + } + default: + break; + } +*/ + +schedule: + schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); +} + +int dvb_usb_remote_init(struct dvb_usb_device *d) +{ + int i; + if (d->props.rc_key_map == NULL) + return 0; + + /* Initialise the remote-control structures.*/ + init_input_dev(&d->rc_input_dev); + + d->rc_input_dev.evbit[0] = BIT(EV_KEY); + d->rc_input_dev.keycodesize = sizeof(unsigned char); + d->rc_input_dev.keycodemax = KEY_MAX; + d->rc_input_dev.name = "IR-receiver inside an USB DVB receiver"; + + /* set the bits for the keys */ + deb_rc("key map size: %d\n",d->props.rc_key_map_size); + for (i = 0; i < d->props.rc_key_map_size; i++) { + deb_rc("setting bit for event %d item %d\n",d->props.rc_key_map[i].event, i); + set_bit(d->props.rc_key_map[i].event, d->rc_input_dev.keybit); + } + + /* Start the remote-control polling. */ + if (d->props.rc_interval < 40) + d->props.rc_interval = 100; /* default */ + + /* setting these two values to non-zero, we have to manage key repeats */ + d->rc_input_dev.rep[REP_PERIOD] = d->props.rc_interval; + d->rc_input_dev.rep[REP_DELAY] = d->props.rc_interval + 150; + + input_register_device(&d->rc_input_dev); + + INIT_WORK(&d->rc_query_work, dvb_usb_read_remote_control, d); + + info("schedule remote query interval to %d msecs.",d->props.rc_interval); + schedule_delayed_work(&d->rc_query_work,msecs_to_jiffies(d->props.rc_interval)); + + d->state |= DVB_USB_STATE_REMOTE; + + return 0; +} + +int dvb_usb_remote_exit(struct dvb_usb_device *d) +{ + if (d->state & DVB_USB_STATE_REMOTE) { + cancel_delayed_work(&d->rc_query_work); + flush_scheduled_work(); + input_unregister_device(&d->rc_input_dev); + } + d->state &= ~DVB_USB_STATE_REMOTE; + return 0; +} + +#define DVB_USB_RC_NEC_EMPTY 0x00 +#define DVB_USB_RC_NEC_KEY_PRESSED 0x01 +#define DVB_USB_RC_NEC_KEY_REPEATED 0x02 +int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, + u8 keybuf[5], u32 *event, int *state) +{ + int i; + struct dvb_usb_rc_key *keymap = d->props.rc_key_map; + *event = 0; + *state = REMOTE_NO_KEY_PRESSED; + switch (keybuf[0]) { + case DVB_USB_RC_NEC_EMPTY: + break; + case DVB_USB_RC_NEC_KEY_PRESSED: + if ((u8) ~keybuf[1] != keybuf[2] || + (u8) ~keybuf[3] != keybuf[4]) { + deb_err("remote control checksum failed.\n"); + break; + } + /* See if we can match the raw key code. */ + for (i = 0; i < sizeof(keymap)/sizeof(struct dvb_usb_rc_key); i++) + if (keymap[i].custom == keybuf[1] && + keymap[i].data == keybuf[3]) { + *event = keymap[i].event; + *state = REMOTE_KEY_PRESSED; + break; + } + deb_err("key mapping failed - no appropriate key found in keymapping\n"); + break; + case DVB_USB_RC_NEC_KEY_REPEATED: + *state = REMOTE_KEY_REPEAT; + break; + default: + deb_err("unkown type of remote status: %d\n",keybuf[0]); + break; + } + return 0; +} +EXPORT_SYMBOL(dvb_usb_nec_rc_key_to_event); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c new file mode 100644 index 00000000000..83d476fb410 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -0,0 +1,211 @@ +/* dvb-usb-urb.c is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * This file contains functions for initializing and handling the + * USB and URB stuff. + */ +#include "dvb-usb-common.h" + +int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, + u16 rlen, int delay_ms) +{ + int actlen,ret = -ENOMEM; + + if (d->props.generic_bulk_ctrl_endpoint == 0) { + err("endpoint for generic control not specified."); + return -EINVAL; + } + + if (wbuf == NULL || wlen == 0) + return -EINVAL; + + if ((ret = down_interruptible(&d->usb_sem))) + return ret; + + debug_dump(wbuf,wlen,deb_xfer); + + ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen, + 2*HZ); + + if (ret) + err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); + else + ret = actlen != wlen ? -1 : 0; + + /* an answer is expected, and no error before */ + if (!ret && rbuf && rlen) { + if (delay_ms) + msleep(delay_ms); + + ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev, + d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen, + 2*HZ); + + if (ret) + err("recv bulk message failed: %d",ret); + else + debug_dump(rbuf,actlen,deb_xfer); + } + + up(&d->usb_sem); + return ret; +} +EXPORT_SYMBOL(dvb_usb_generic_rw); + +int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) +{ + return dvb_usb_generic_rw(d,buf,len,NULL,0,0); +} +EXPORT_SYMBOL(dvb_usb_generic_write); + +static void dvb_usb_bulk_urb_complete(struct urb *urb, struct pt_regs *ptregs) +{ + struct dvb_usb_device *d = urb->context; + + deb_ts("bulk urb completed. feedcount: %d, status: %d, length: %d\n",d->feedcount,urb->status, + urb->actual_length); + + switch (urb->status) { + case 0: /* success */ + case -ETIMEDOUT: /* NAK */ + break; + case -ECONNRESET: /* kill */ + case -ENOENT: + case -ESHUTDOWN: + return; + default: /* error */ + deb_ts("urb completition error %d.", urb->status); + break; + } + + if (d->feedcount > 0 && urb->actual_length > 0) { + if (d->state & DVB_USB_STATE_DVB) + dvb_dmx_swfilter(&d->demux, (u8*) urb->transfer_buffer,urb->actual_length); + } else + deb_ts("URB dropped because of feedcount.\n"); + + usb_submit_urb(urb,GFP_ATOMIC); +} + +int dvb_usb_urb_kill(struct dvb_usb_device *d) +{ + int i; + for (i = 0; i < d->urbs_submitted; i++) { + deb_info("killing URB no. %d.\n",i); + + /* stop the URB */ + usb_kill_urb(d->urb_list[i]); + } + d->urbs_submitted = 0; + return 0; +} + +int dvb_usb_urb_submit(struct dvb_usb_device *d) +{ + int i,ret; + for (i = 0; i < d->urbs_initialized; i++) { + deb_info("submitting URB no. %d\n",i); + if ((ret = usb_submit_urb(d->urb_list[i],GFP_ATOMIC))) { + err("could not submit URB no. %d - get them all back\n",i); + dvb_usb_urb_kill(d); + return ret; + } + d->urbs_submitted++; + } + return 0; +} + +static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d) +{ + int i,bufsize = d->props.urb.count * d->props.urb.u.bulk.buffersize; + + deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize); + /* allocate the actual buffer for the URBs */ + if ((d->buffer = usb_buffer_alloc(d->udev, bufsize, SLAB_ATOMIC, &d->dma_handle)) == NULL) { + deb_info("not enough memory for urb-buffer allocation.\n"); + return -ENOMEM; + } + deb_info("allocation successful\n"); + memset(d->buffer,0,bufsize); + + d->state |= DVB_USB_STATE_URB_BUF; + + /* allocate the URBs */ + for (i = 0; i < d->props.urb.count; i++) { + if (!(d->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) { + return -ENOMEM; + } + + usb_fill_bulk_urb( d->urb_list[i], d->udev, + usb_rcvbulkpipe(d->udev,d->props.urb.endpoint), + &d->buffer[i*d->props.urb.u.bulk.buffersize], + d->props.urb.u.bulk.buffersize, + dvb_usb_bulk_urb_complete, d); + + d->urb_list[i]->transfer_flags = 0; + d->urbs_initialized++; + } + return 0; +} + +int dvb_usb_urb_init(struct dvb_usb_device *d) +{ + /* + * when reloading the driver w/o replugging the device + * sometimes a timeout occures, this helps + */ + if (d->props.generic_bulk_ctrl_endpoint != 0) { + usb_clear_halt(d->udev,usb_sndbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); + usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.generic_bulk_ctrl_endpoint)); + } + usb_clear_halt(d->udev,usb_rcvbulkpipe(d->udev,d->props.urb.endpoint)); + + /* allocate the array for the data transfer URBs */ + d->urb_list = kmalloc(d->props.urb.count * sizeof(struct urb *),GFP_KERNEL); + if (d->urb_list == NULL) + return -ENOMEM; + memset(d->urb_list,0,d->props.urb.count * sizeof(struct urb *)); + d->state |= DVB_USB_STATE_URB_LIST; + + switch (d->props.urb.type) { + case DVB_USB_BULK: + return dvb_usb_bulk_urb_init(d); + case DVB_USB_ISOC: + err("isochronous transfer not yet implemented in dvb-usb."); + return -EINVAL; + default: + err("unkown URB-type for data transfer."); + return -EINVAL; + } +} + +int dvb_usb_urb_exit(struct dvb_usb_device *d) +{ + int i; + + dvb_usb_urb_kill(d); + + if (d->state & DVB_USB_STATE_URB_LIST) { + for (i = 0; i < d->urbs_initialized; i++) { + if (d->urb_list[i] != NULL) { + deb_info("freeing URB no. %d.\n",i); + /* free the URBs */ + usb_free_urb(d->urb_list[i]); + } + } + d->urbs_initialized = 0; + /* free the urb array */ + kfree(d->urb_list); + d->state &= ~DVB_USB_STATE_URB_LIST; + } + + if (d->state & DVB_USB_STATE_URB_BUF) + usb_buffer_free(d->udev, d->props.urb.u.bulk.buffersize * d->props.urb.count, + d->buffer, d->dma_handle); + + d->state &= ~DVB_USB_STATE_URB_BUF; + return 0; +} diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h new file mode 100644 index 00000000000..abcee1943f6 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -0,0 +1,315 @@ +/* dvb-usb.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * see dvb-usb-init.c for copyright information. + * + * the headerfile, all dvb-usb-drivers have to include. + */ +#ifndef __DVB_USB_H__ +#define __DVB_USB_H__ + +#include <linux/config.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/usb.h> + +#include "dvb_frontend.h" +#include "dvb_demux.h" +#include "dvb_net.h" +#include "dmxdev.h" + +#include "dvb-pll.h" + +#include "dvb-usb-ids.h" + +/* debug */ +#ifdef CONFIG_DVB_USB_DEBUG +#define dprintk(var,level,args...) \ + do { if ((var & level)) { printk(args); } } while (0) + +#define debug_dump(b,l,func) {\ + int loop_; \ + for (loop_ = 0; loop_ < l; loop_++) func("%02x ", b[loop_]); \ + func("\n");\ +} +#define DVB_USB_DEBUG_STATUS +#else +#define dprintk(args...) +#define debug_dump(b,l,func) + +#define DVB_USB_DEBUG_STATUS " (debugging is not enabled)" + +#endif + +/* generic log methods - taken from usb.h */ +#ifndef DVB_USB_LOG_PREFIX + #define DVB_USB_LOG_PREFIX "dvb-usb (please define a log prefix)" +#endif + +#undef err +#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef info +#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) +#undef warn +#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg) + +/** + * struct dvb_usb_device_description - name and its according USB IDs + * @name: real name of the box, regardless which DVB USB device class is in use + * @cold_ids: array of struct usb_device_id which describe the device in + * pre-firmware state + * @warm_ids: array of struct usb_device_id which describe the device in + * post-firmware state + * + * Each DVB USB device class can have one or more actual devices, this struct + * assigns a name to it. + */ +struct dvb_usb_device_description { + const char *name; + +#define DVB_USB_ID_MAX_NUM 15 + struct usb_device_id *cold_ids[DVB_USB_ID_MAX_NUM]; + struct usb_device_id *warm_ids[DVB_USB_ID_MAX_NUM]; +}; + +/** + * struct dvb_usb_rc_key - a remote control key and its input-event + * @custom: the vendor/custom part of the key + * @data: the actual key part + * @event: the input event assigned to key identified by custom and data + */ +struct dvb_usb_rc_key { + u8 custom,data; + u32 event; +}; + +struct dvb_usb_device; + +/** + * struct dvb_usb_properties - properties of a dvb-usb-device + * @caps: capabilites of the DVB USB device. + * @pid_filter_count: number of PID filter position in the optional hardware + * PID-filter. + * + * @usb_ctrl: which USB device-side controller is in use. Needed for firmware + * download. + * @firmware: name of the firmware file. + * + * @size_of_priv: how many bytes shall be allocated for the private field + * of struct dvb_usb_device. + * + * @power_ctrl: called to enable/disable power of the device. + * @streaming_crtl: called to start and stop the MPEG2-TS streaming of the + * device (not URB submitting/killing). + * @pid_filter_ctrl: called to en/disable the PID filter, if any. + * @pid_filter: called to set/unset a PID for filtering. + * + * @read_mac_address: called to read the MAC address of the device. + * + * @frontend_attach: called to attach the possible frontends (fill fe-field + * of struct dvb_usb_device). + * @tuner_attach: called to attach the correct tuner and to fill pll_addr, + * pll_desc and pll_init_buf of struct dvb_usb_device). + * @identify_state: called to determine the state (cold or warm), when it + * is not distinguishable by the USB IDs. + * + * @rc_key_map: a hard-wired array of struct dvb_usb_rc_key (NULL to disable + * remote control handling). + * @rc_key_map_size: number of items in @rc_key_map. + * @rc_query: called to query an event event. + * @rc_interval: time in ms between two queries. + * + * @i2c_algo: i2c_algorithm if the device has I2CoverUSB. + * + * @generic_bulk_ctrl_endpoint: most of the DVB USB devices have a generic + * endpoint which received control messages with bulk transfers. When this + * is non-zero, one can use dvb_usb_generic_rw and dvb_usb_generic_write- + * helper functions. + * + * @urb: describes the kind of USB transfer used for MPEG2-TS-streaming. + * Currently only BULK is implemented + * + * @num_device_descs: number of struct dvb_usb_device_description in @devices + * @devices: array of struct dvb_usb_device_description compatibles with these + * properties. + */ +struct dvb_usb_properties { + +#define DVB_USB_HAS_PID_FILTER 0x01 +#define DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF 0x02 +#define DVB_USB_NEED_PID_FILTERING 0x04 +#define DVB_USB_IS_AN_I2C_ADAPTER 0x08 + int caps; + int pid_filter_count; + +#define CYPRESS_AN2135 0 +#define CYPRESS_AN2235 1 +#define CYPRESS_FX2 2 + int usb_ctrl; + const char *firmware; + + int size_of_priv; + + int (*power_ctrl) (struct dvb_usb_device *, int); + int (*streaming_ctrl) (struct dvb_usb_device *, int); + int (*pid_filter_ctrl) (struct dvb_usb_device *, int); + int (*pid_filter) (struct dvb_usb_device *, int, u16, int); + + int (*read_mac_address) (struct dvb_usb_device *, u8 []); + int (*frontend_attach) (struct dvb_usb_device *); + int (*tuner_attach) (struct dvb_usb_device *); + + int (*identify_state) (struct usb_device *, struct dvb_usb_properties *, + struct dvb_usb_device_description **, int *); + +/* remote control properties */ +#define REMOTE_NO_KEY_PRESSED 0x00 +#define REMOTE_KEY_PRESSED 0x01 +#define REMOTE_KEY_REPEAT 0x02 + struct dvb_usb_rc_key *rc_key_map; + int rc_key_map_size; + int (*rc_query) (struct dvb_usb_device *, u32 *, int *); + int rc_interval; + + struct i2c_algorithm *i2c_algo; + + int generic_bulk_ctrl_endpoint; + + struct { +#define DVB_USB_BULK 1 +#define DVB_USB_ISOC 2 + int type; + int count; + int endpoint; + + union { + struct { + int buffersize; /* per URB */ + } bulk; + struct { + int framesperurb; + int framesize; + } isoc; + } u; + } urb; + + int num_device_descs; + struct dvb_usb_device_description devices[8]; +}; + + +/** + * struct dvb_usb_device - object of a DVB USB device + * @props: copy of the struct dvb_usb_properties this device belongs to. + * @desc: pointer to the device's struct dvb_usb_device_description. + * @state: initialization and runtime state of the device. + * + * @udev: pointer to the device's struct usb_device. + * @urb_list: array of dynamically allocated struct urb for the MPEG2-TS- + * streaming. + * @buffer: buffer used to streaming. + * @dma_handle: dma_addr_t for buffer. + * @urbs_initialized: number of URBs initialized. + * @urbs_submitted: number of URBs submitted. + * @feedcount: number of reqested feeds (used for streaming-activation) + * @pid_filtering: is hardware pid_filtering used or not. + * @usb_sem: semaphore of USB control messages (reading needs two messages) + * @i2c_sem: semaphore for i2c-transfers + * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB + * @pll_addr: I2C address of the tuner for programming + * @pll_init: array containing the initialization buffer + * @pll_desc: pointer to the appropriate struct dvb_pll_desc + * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod + * @dvb_adap: device's dvb_adapter. + * @dmxdev: device's dmxdev. + * @demux: device's software demuxer. + * @dvb_net: device's dvb_net interfaces. + * @dvb_frontend: device's frontend. + * @max_feed_count: how many feeds can be handled simultaneously by this + * device + * @fe_sleep: rerouted frontend-sleep function. + * @fe_init: rerouted frontend-init (wakeup) function. + * @rc_input_dev: input device for the remote control. + * @rc_query_work: struct work_struct frequent rc queries + * @last_event: last triggered event + * @last_state: last state (no, pressed, repeat) + * @owner: owner of the dvb_adapter + * @priv: private data of the actual driver (allocate by dvb-usb, size defined + * in size_of_priv of dvb_usb_properties). + */ +struct dvb_usb_device { + struct dvb_usb_properties props; + struct dvb_usb_device_description *desc; + +#define DVB_USB_STATE_INIT 0x000 +#define DVB_USB_STATE_URB_LIST 0x001 +#define DVB_USB_STATE_URB_BUF 0x002 +#define DVB_USB_STATE_DVB 0x004 +#define DVB_USB_STATE_I2C 0x008 +#define DVB_USB_STATE_REMOTE 0x010 +#define DVB_USB_STATE_URB_SUBMIT 0x020 + int state; + + /* usb */ + struct usb_device *udev; + struct urb **urb_list; + u8 *buffer; + dma_addr_t dma_handle; + int urbs_initialized; + int urbs_submitted; + + int feedcount; + int pid_filtering; + + /* locking */ + struct semaphore usb_sem; + + /* i2c */ + struct semaphore i2c_sem; + struct i2c_adapter i2c_adap; + + /* tuner programming information */ + u8 pll_addr; + u8 pll_init[4]; + struct dvb_pll_desc *pll_desc; + int (*tuner_pass_ctrl)(struct dvb_frontend *, int, u8); + + /* dvb */ + struct dvb_adapter dvb_adap; + struct dmxdev dmxdev; + struct dvb_demux demux; + struct dvb_net dvb_net; + struct dvb_frontend* fe; + int max_feed_count; + + int (*fe_sleep) (struct dvb_frontend *); + int (*fe_init) (struct dvb_frontend *); + + /* remote control */ + struct input_dev rc_input_dev; + struct work_struct rc_query_work; + u32 last_event; + int last_state; + + struct module *owner; + + void *priv; +}; + +extern int dvb_usb_device_init(struct usb_interface *, struct dvb_usb_properties *, struct module *); +extern void dvb_usb_device_exit(struct usb_interface *); + +/* the generic read/write method for device control */ +extern int dvb_usb_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16,int); +extern int dvb_usb_generic_write(struct dvb_usb_device *, u8 *, u16); + +/* commonly used remote control parsing */ +extern int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *, u8[], u32 *, int *); + +/* commonly used pll init and set functions */ +extern int dvb_usb_pll_init_i2c(struct dvb_frontend *); +extern int dvb_usb_pll_set(struct dvb_frontend *, struct dvb_frontend_parameters *, u8[]); +extern int dvb_usb_pll_set_i2c(struct dvb_frontend *, struct dvb_frontend_parameters *); + + +#endif diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c new file mode 100644 index 00000000000..9d83781aef9 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -0,0 +1,236 @@ +/* DVB USB framework compliant Linux driver for the Hauppauge WinTV-NOVA-T usb2 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc,2=eeprom (|-able))." DVB_USB_DEBUG_STATUS); + +#define deb_rc(args...) dprintk(debug,0x01,args) +#define deb_ee(args...) dprintk(debug,0x02,args) + +/* Hauppauge NOVA-T USB2 keys */ +static struct dvb_usb_rc_key haupp_rc_keys [] = { + { 0x1e, 0x00, KEY_0 }, + { 0x1e, 0x01, KEY_1 }, + { 0x1e, 0x02, KEY_2 }, + { 0x1e, 0x03, KEY_3 }, + { 0x1e, 0x04, KEY_4 }, + { 0x1e, 0x05, KEY_5 }, + { 0x1e, 0x06, KEY_6 }, + { 0x1e, 0x07, KEY_7 }, + { 0x1e, 0x08, KEY_8 }, + { 0x1e, 0x09, KEY_9 }, + { 0x1e, 0x0a, KEY_KPASTERISK }, + { 0x1e, 0x0b, KEY_RED }, + { 0x1e, 0x0c, KEY_RADIO }, + { 0x1e, 0x0d, KEY_MENU }, + { 0x1e, 0x0e, KEY_GRAVE }, /* # */ + { 0x1e, 0x0f, KEY_MUTE }, + { 0x1e, 0x10, KEY_VOLUMEUP }, + { 0x1e, 0x11, KEY_VOLUMEDOWN }, + { 0x1e, 0x12, KEY_CHANNEL }, + { 0x1e, 0x14, KEY_UP }, + { 0x1e, 0x15, KEY_DOWN }, + { 0x1e, 0x16, KEY_LEFT }, + { 0x1e, 0x17, KEY_RIGHT }, + { 0x1e, 0x18, KEY_VIDEO }, + { 0x1e, 0x19, KEY_AUDIO }, + { 0x1e, 0x1a, KEY_MEDIA }, + { 0x1e, 0x1b, KEY_EPG }, + { 0x1e, 0x1c, KEY_TV }, + { 0x1e, 0x1e, KEY_NEXT }, + { 0x1e, 0x1f, KEY_BACK }, + { 0x1e, 0x20, KEY_CHANNELUP }, + { 0x1e, 0x21, KEY_CHANNELDOWN }, + { 0x1e, 0x24, KEY_LAST }, /* Skip backwards */ + { 0x1e, 0x25, KEY_OK }, + { 0x1e, 0x29, KEY_BLUE}, + { 0x1e, 0x2e, KEY_GREEN }, + { 0x1e, 0x30, KEY_PAUSE }, + { 0x1e, 0x32, KEY_REWIND }, + { 0x1e, 0x34, KEY_FASTFORWARD }, + { 0x1e, 0x35, KEY_PLAY }, + { 0x1e, 0x36, KEY_STOP }, + { 0x1e, 0x37, KEY_RECORD }, + { 0x1e, 0x38, KEY_YELLOW }, + { 0x1e, 0x3b, KEY_GOTO }, + { 0x1e, 0x3d, KEY_POWER }, +}; + +/* Firmware bug? sometimes, when a new key is pressed, the previous pressed key + * is delivered. No workaround yet, maybe a new firmware. + */ +static int nova_t_rc_query(struct dvb_usb_device *d, u32 *event, int *state) +{ + u8 key[5],cmd[2] = { DIBUSB_REQ_POLL_REMOTE, 0x35 }, data,toggle,custom; + u16 raw; + int i; + struct dibusb_state *st = d->priv; + + dvb_usb_generic_rw(d,cmd,2,key,5,0); + + *state = REMOTE_NO_KEY_PRESSED; + switch (key[0]) { + case DIBUSB_RC_HAUPPAUGE_KEY_PRESSED: + raw = ((key[1] << 8) | key[2]) >> 3; + toggle = !!(raw & 0x800); + data = raw & 0x3f; + custom = (raw >> 6) & 0x1f; + + deb_rc("raw key code 0x%02x, 0x%02x, 0x%02x to c: %02x d: %02x toggle: %d\n",key[1],key[2],key[3],custom,data,toggle); + + for (i = 0; i < ARRAY_SIZE(haupp_rc_keys); i++) { + deb_rc("c: %x, d: %x\n",haupp_rc_keys[i].data,haupp_rc_keys[i].custom); + if (haupp_rc_keys[i].data == data && + haupp_rc_keys[i].custom == custom) { + *event = haupp_rc_keys[i].event; + *state = REMOTE_KEY_PRESSED; + if (st->old_toggle == toggle) { + if (st->last_repeat_count++ < 2) + *state = REMOTE_NO_KEY_PRESSED; + } else { + st->last_repeat_count = 0; + st->old_toggle = toggle; + } + break; + } + } + + break; + case DIBUSB_RC_HAUPPAUGE_KEY_EMPTY: + default: + break; + } + + return 0; +} + +static int nova_t_read_mac_address (struct dvb_usb_device *d, u8 mac[6]) +{ + int i; + u8 b; + + mac[0] = 0x00; + mac[1] = 0x0d; + mac[2] = 0xfe; + + /* this is a complete guess, but works for my box */ + for (i = 136; i < 139; i++) { + dibusb_read_eeprom_byte(d,i, &b); + + mac[5 - (i - 136)] = b; + +/* deb_ee("%02x ",b); + if ((i+1) % 16 == 0) + deb_ee("\n");*/ + } + + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties nova_t_properties; + +static int nova_t_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&nova_t_properties,THIS_MODULE); +} + +/* do not change the order of the ID table */ +static struct usb_device_id nova_t_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HAUPPAUGE, USB_PID_WINTV_NOVA_T_USB2_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, nova_t_table); + +static struct dvb_usb_properties nova_t_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-nova-t-usb2-01.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .pid_filter = dibusb_pid_filter, + .pid_filter_ctrl = dibusb_pid_filter_ctrl, + .power_ctrl = dibusb2_0_power_ctrl, + .frontend_attach = dibusb_dib3000mc_frontend_attach, + .tuner_attach = dibusb_dib3000mc_tuner_attach, + .read_mac_address = nova_t_read_mac_address, + + .rc_interval = 100, + .rc_key_map = haupp_rc_keys, + .rc_key_map_size = ARRAY_SIZE(haupp_rc_keys), + .rc_query = nova_t_rc_query, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Hauppauge WinTV-NOVA-T usb2", + { &nova_t_table[0], NULL }, + { &nova_t_table[1], NULL }, + }, + } +}; + +static struct usb_driver nova_t_driver = { + .owner = THIS_MODULE, + .name = "Hauppauge WinTV-NOVA-T usb2", + .probe = nova_t_probe, + .disconnect = dvb_usb_device_exit, + .id_table = nova_t_table, +}; + +/* module stuff */ +static int __init nova_t_module_init(void) +{ + int result; + if ((result = usb_register(&nova_t_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit nova_t_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&nova_t_driver); +} + +module_init (nova_t_module_init); +module_exit (nova_t_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Hauppauge WinTV-NOVA-T usb2"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c new file mode 100644 index 00000000000..aa560422ce7 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -0,0 +1,162 @@ +/* DVB USB framework compliant Linux driver for the HanfTek UMT-010 USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "dibusb.h" + +#include "mt352.h" + +static int umt_mt352_demod_init(struct dvb_frontend *fe) +{ + static u8 mt352_clock_config[] = { 0x89, 0xb8, 0x2d }; + static u8 mt352_reset[] = { 0x50, 0x80 }; + static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; + static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0x40 }; + static u8 mt352_agc_cfg[] = { 0x67, 0x10, 0xa0 }; + + static u8 mt352_sec_agc_cfg1[] = { 0x6a, 0xff }; + static u8 mt352_sec_agc_cfg2[] = { 0x6d, 0xff }; + static u8 mt352_sec_agc_cfg3[] = { 0x70, 0x40 }; + static u8 mt352_sec_agc_cfg4[] = { 0x7b, 0x03 }; + static u8 mt352_sec_agc_cfg5[] = { 0x7d, 0x0f }; + + static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; + static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x06 }; + + mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); + udelay(2000); + mt352_write(fe, mt352_reset, sizeof(mt352_reset)); + mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); + + mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); + mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); + + mt352_write(fe, mt352_sec_agc_cfg1, sizeof(mt352_sec_agc_cfg1)); + mt352_write(fe, mt352_sec_agc_cfg2, sizeof(mt352_sec_agc_cfg2)); + mt352_write(fe, mt352_sec_agc_cfg3, sizeof(mt352_sec_agc_cfg3)); + mt352_write(fe, mt352_sec_agc_cfg4, sizeof(mt352_sec_agc_cfg4)); + mt352_write(fe, mt352_sec_agc_cfg5, sizeof(mt352_sec_agc_cfg5)); + + mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); + mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); + + return 0; +} + +static int umt_mt352_frontend_attach(struct dvb_usb_device *d) +{ + struct mt352_config umt_config; + + memset(&umt_config,0,sizeof(struct mt352_config)); + umt_config.demod_init = umt_mt352_demod_init; + umt_config.demod_address = 0xf; + umt_config.pll_set = dvb_usb_pll_set; + + d->fe = mt352_attach(&umt_config, &d->i2c_adap); + + return 0; +} + +static int umt_tuner_attach (struct dvb_usb_device *d) +{ + d->pll_addr = 0x61; + d->pll_desc = &dvb_pll_tua6034; + return 0; +} + +/* USB Driver stuff */ +static struct dvb_usb_properties umt_properties; + +static int umt_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + if (dvb_usb_device_init(intf,&umt_properties,THIS_MODULE) == 0) + return 0; + return -EINVAL; +} + +/* do not change the order of the ID table */ +static struct usb_device_id umt_table [] = { +/* 00 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_COLD) }, +/* 01 */ { USB_DEVICE(USB_VID_HANFTEK, USB_PID_HANFTEK_UMT_010_WARM) }, + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, umt_table); + +static struct dvb_usb_properties umt_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-umt-010-02.fw", + + .size_of_priv = sizeof(struct dibusb_state), + + .streaming_ctrl = dibusb2_0_streaming_ctrl, + .power_ctrl = dibusb_power_ctrl, + .frontend_attach = umt_mt352_frontend_attach, + .tuner_attach = umt_tuner_attach, + + .i2c_algo = &dibusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 20, + .endpoint = 0x06, + .u = { + .bulk = { + .buffersize = 512, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Hanftek UMT-010 DVB-T USB2.0", + { &umt_table[0], NULL }, + { &umt_table[1], NULL }, + }, + } +}; + +static struct usb_driver umt_driver = { + .owner = THIS_MODULE, + .name = "HanfTek UMT-010 USB2.0 DVB-T devices", + .probe = umt_probe, + .disconnect = dvb_usb_device_exit, + .id_table = umt_table, +}; + +/* module stuff */ +static int __init umt_module_init(void) +{ + int result; + if ((result = usb_register(&umt_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit umt_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&umt_driver); +} + +module_init (umt_module_init); +module_exit (umt_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for HanfTek UMT 010 USB2.0 DVB-T device"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp7045-fe.c b/drivers/media/dvb/dvb-usb/vp7045-fe.c new file mode 100644 index 00000000000..2746edfeccb --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045-fe.c @@ -0,0 +1,196 @@ +/* DVB frontend part of the Linux driver for TwinhanDTV Alpha/MagicBoxII USB2.0 + * DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + * + */ +#include "vp7045.h" + +/* It is a Zarlink MT352 within a Samsung Tuner (DNOS404ZH102A) - 040929 - AAT + * + * Programming is hidden inside the firmware, so set_frontend is very easy. + * Even though there is a Firmware command that one can use to access the demod + * via its registers. This is used for status information. + */ + +struct vp7045_fe_state { + struct dvb_frontend fe; + struct dvb_usb_device *d; +}; + + +static int vp7045_fe_read_status(struct dvb_frontend* fe, fe_status_t *status) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 s0 = vp7045_read_reg(state->d,0x00), + s1 = vp7045_read_reg(state->d,0x01), + s3 = vp7045_read_reg(state->d,0x03); + + *status = 0; + if (s0 & (1 << 4)) + *status |= FE_HAS_CARRIER; + if (s0 & (1 << 1)) + *status |= FE_HAS_VITERBI; + if (s0 & (1 << 5)) + *status |= FE_HAS_LOCK; + if (s1 & (1 << 1)) + *status |= FE_HAS_SYNC; + if (s3 & (1 << 6)) + *status |= FE_HAS_SIGNAL; + + if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != + (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) + *status &= ~FE_HAS_LOCK; + + return 0; +} + +static int vp7045_fe_read_ber(struct dvb_frontend* fe, u32 *ber) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *ber = (vp7045_read_reg(state->d, 0x0D) << 16) | + (vp7045_read_reg(state->d, 0x0E) << 8) | + vp7045_read_reg(state->d, 0x0F); + return 0; +} + +static int vp7045_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + *unc = (vp7045_read_reg(state->d, 0x10) << 8) | + vp7045_read_reg(state->d, 0x11); + return 0; +} + +static int vp7045_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u16 signal = (vp7045_read_reg(state->d, 0x14) << 8) | + vp7045_read_reg(state->d, 0x15); + + *strength = ~signal; + return 0; +} + +static int vp7045_fe_read_snr(struct dvb_frontend* fe, u16 *snr) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 _snr = vp7045_read_reg(state->d, 0x09); + *snr = (_snr << 8) | _snr; + return 0; +} + +static int vp7045_fe_init(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_sleep(struct dvb_frontend* fe) +{ + return 0; +} + +static int vp7045_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 800; + return 0; +} + +static int vp7045_fe_set_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + u8 buf[5]; + u32 freq = fep->frequency / 1000; + + buf[0] = (freq >> 16) & 0xff; + buf[1] = (freq >> 8) & 0xff; + buf[2] = freq & 0xff; + buf[3] = 0; + + switch (fep->u.ofdm.bandwidth) { + case BANDWIDTH_8_MHZ: buf[4] = 8; break; + case BANDWIDTH_7_MHZ: buf[4] = 7; break; + case BANDWIDTH_6_MHZ: buf[4] = 6; break; + case BANDWIDTH_AUTO: return -EOPNOTSUPP; + default: + return -EINVAL; + } + + vp7045_usb_op(state->d,LOCK_TUNER_COMMAND,buf,5,NULL,0,200); + return 0; +} + +static int vp7045_fe_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters *fep) +{ + return 0; +} + +static void vp7045_fe_release(struct dvb_frontend* fe) +{ + struct vp7045_fe_state *state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops vp7045_fe_ops; + +struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d) +{ + struct vp7045_fe_state *s = kmalloc(sizeof(struct vp7045_fe_state), GFP_KERNEL); + if (s == NULL) + goto error; + memset(s,0,sizeof(struct vp7045_fe_state)); + + s->d = d; + s->fe.ops = &vp7045_fe_ops; + s->fe.demodulator_priv = s; + + goto success; +error: + return NULL; +success: + return &s->fe; +} + + +static struct dvb_frontend_ops vp7045_fe_ops = { + .info = { + .name = "Twinhan VP7045/46 USB DVB-T", + .type = FE_OFDM, + .frequency_min = 44250000, + .frequency_max = 867250000, + .frequency_stepsize = 1000, + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | + FE_CAN_TRANSMISSION_MODE_AUTO | + FE_CAN_GUARD_INTERVAL_AUTO | + FE_CAN_RECOVER | + FE_CAN_HIERARCHY_AUTO, + }, + + .release = vp7045_fe_release, + + .init = vp7045_fe_init, + .sleep = vp7045_fe_sleep, + + .set_frontend = vp7045_fe_set_frontend, + .get_frontend = vp7045_fe_get_frontend, + .get_tune_settings = vp7045_fe_get_tune_settings, + + .read_status = vp7045_fe_read_status, + .read_ber = vp7045_fe_read_ber, + .read_signal_strength = vp7045_fe_read_signal_strength, + .read_snr = vp7045_fe_read_snr, + .read_ucblocks = vp7045_fe_read_unc_blocks, +}; diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c new file mode 100644 index 00000000000..02ecc9a8e3b --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -0,0 +1,263 @@ +/* DVB USB compliant Linux driver for the + * - TwinhanDTV Alpha/MagicBoxII USB2.0 DVB-T receiver + * - DigitalNow TinyUSB2 DVB-t receiver + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "vp7045.h" + +/* debug */ +int dvb_usb_vp7045_debug; +module_param_named(debug,dvb_usb_vp7045_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS); + +int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen, int msec) +{ + int ret = 0; + u8 inbuf[12] = { 0 }, outbuf[20] = { 0 }; + + outbuf[0] = cmd; + + if (outlen > 19) + outlen = 19; + + if (inlen > 11) + inlen = 11; + + if (out != NULL && outlen > 0) + memcpy(&outbuf[1], out, outlen); + + deb_xfer("out buffer: "); + debug_dump(outbuf,outlen+1,deb_xfer); + + if ((ret = down_interruptible(&d->usb_sem))) + return ret; + + if (usb_control_msg(d->udev, + usb_sndctrlpipe(d->udev,0), + TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, + outbuf, 20, 2*HZ) != 20) { + err("USB control message 'out' went wrong."); + ret = -EIO; + goto unlock; + } + + msleep(msec); + + if (usb_control_msg(d->udev, + usb_rcvctrlpipe(d->udev,0), + TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, + inbuf, 12, 2*HZ) != 12) { + err("USB control message 'in' went wrong."); + ret = -EIO; + goto unlock; + } + + deb_xfer("in buffer: "); + debug_dump(inbuf,12,deb_xfer); + + if (in != NULL && inlen > 0) + memcpy(in,&inbuf[1],inlen); + +unlock: + up(&d->usb_sem); + + return ret; +} + +u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg) +{ + u8 obuf[2] = { 0 },v; + obuf[1] = reg; + + vp7045_usb_op(d,TUNER_REG_READ,obuf,2,&v,1,30); + + return v; +} + +static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 v = onoff; + return vp7045_usb_op(d,SET_TUNER_POWER,&v,1,NULL,0,150); +} + +/* remote control stuff */ + +/* The keymapping struct. Somehow this should be loaded to the driver, but + * currently it is hardcoded. */ +static struct dvb_usb_rc_key vp7045_rc_keys[] = { + /* insert the keys like this. to make the raw keys visible, enable + * debug=0x04 when loading dvb-usb-vp7045. */ + + /* these keys are probably wrong. I don't have a working IR-receiver on my + * vp7045, so I can't test it. Patches are welcome. */ + { 0x00, 0x01, KEY_1 }, + { 0x00, 0x02, KEY_2 }, +}; + +static int vp7045_rc_query(struct dvb_usb_device *d, u32 *key_buf, int *state) +{ + u8 key; + int i; + vp7045_usb_op(d,RC_VAL_READ,NULL,0,&key,1,20); + + deb_rc("remote query key: %x %d\n",key,key); + + if (key == 0x44) { + *state = REMOTE_NO_KEY_PRESSED; + return 0; + } + + for (i = 0; i < sizeof(vp7045_rc_keys)/sizeof(struct dvb_usb_rc_key); i++) + if (vp7045_rc_keys[i].data == key) { + *state = REMOTE_KEY_PRESSED; + *key_buf = vp7045_rc_keys[i].event; + break; + } + return 0; +} + +static int vp7045_read_eeprom(struct dvb_usb_device *d,u8 *buf, int len, int offset) +{ + int i = 0; + u8 v,br[2]; + for (i=0; i < len; i++) { + v = offset + i; + vp7045_usb_op(d,GET_EE_VALUE,&v,1,br,2,5); + buf[i] = br[1]; + } + deb_info("VP7045 EEPROM read (offs: %d, len: %d) : ",offset, i); + debug_dump(buf,i,deb_info); + return 0; +} + + +static int vp7045_read_mac_addr(struct dvb_usb_device *d,u8 mac[6]) +{ + return vp7045_read_eeprom(d,mac, 6, MAC_0_ADDR); +} + +static int vp7045_frontend_attach(struct dvb_usb_device *d) +{ + u8 buf[255] = { 0 }; + + vp7045_usb_op(d,VENDOR_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("firmware says: %s ",buf); + + vp7045_usb_op(d,PRODUCT_STRING_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("%s ",buf); + + vp7045_usb_op(d,FW_VERSION_READ,NULL,0,buf,20,0); + buf[10] = '\0'; + deb_info("v%s\n",buf); + +/* Dump the EEPROM */ +/* vp7045_read_eeprom(d,buf, 255, FX2_ID_ADDR); */ + + d->fe = vp7045_fe_attach(d); + + return 0; +} + +static struct dvb_usb_properties vp7045_properties; + +static int vp7045_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&vp7045_properties,THIS_MODULE); +} + +static struct usb_device_id vp7045_usb_table [] = { + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TWINHAN_VP7045_WARM) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_COLD) }, + { USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_DNTV_TINYUSB2_WARM) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(usb, vp7045_usb_table); + +static struct dvb_usb_properties vp7045_properties = { + .caps = 0, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-vp7045-01.fw", + + .power_ctrl = vp7045_power_ctrl, + .frontend_attach = vp7045_frontend_attach, + .read_mac_address = vp7045_read_mac_addr, + + .rc_interval = 400, + .rc_key_map = vp7045_rc_keys, + .rc_key_map_size = ARRAY_SIZE(vp7045_rc_keys), + .rc_query = vp7045_rc_query, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 2, + .devices = { + { .name = "Twinhan USB2.0 DVB-T receiver (TwinhanDTV Alpha/MagicBox II)", + .cold_ids = { &vp7045_usb_table[0], NULL }, + .warm_ids = { &vp7045_usb_table[1], NULL }, + }, + { .name = "DigitalNow TinyUSB 2 DVB-t Receiver", + .cold_ids = { &vp7045_usb_table[2], NULL }, + .warm_ids = { &vp7045_usb_table[3], NULL }, + }, + { 0 }, + } +}; + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver vp7045_usb_driver = { + .owner = THIS_MODULE, + .name = "dvb-usb-vp7045", + .probe = vp7045_usb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = vp7045_usb_table, +}; + +/* module stuff */ +static int __init vp7045_usb_module_init(void) +{ + int result; + if ((result = usb_register(&vp7045_usb_driver))) { + err("usb_register failed. (%d)",result); + return result; + } + + return 0; +} + +static void __exit vp7045_usb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&vp7045_usb_driver); +} + +module_init(vp7045_usb_module_init); +module_exit(vp7045_usb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Twinhan MagicBox/Alpha and DNTV tinyUSB2 DVB-T USB2.0"); +MODULE_VERSION("1.0"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/vp7045.h b/drivers/media/dvb/dvb-usb/vp7045.h new file mode 100644 index 00000000000..9ce21a20fa8 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/vp7045.h @@ -0,0 +1,78 @@ +/* Common header-file of the Linux driver for the TwinhanDTV Alpha/MagicBoxII + * USB2.0 DVB-T receiver. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) + * + * Thanks to Twinhan who kindly provided hardware and information. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#ifndef _DVB_USB_VP7045_H_ +#define _DVB_USB_VP7045_H_ + +#define DVB_USB_LOG_PREFIX "vp7045" +#include "dvb-usb.h" + +extern int dvb_usb_vp7045_debug; +#define deb_info(args...) dprintk(dvb_usb_vp7045_debug,0x01,args) +#define deb_xfer(args...) dprintk(dvb_usb_vp7045_debug,0x02,args) +#define deb_rc(args...) dprintk(dvb_usb_vp7045_debug,0x04,args) + +/* vp7045 commands */ + +/* Twinhan Vendor requests */ +#define TH_COMMAND_IN 0xC0 +#define TH_COMMAND_OUT 0xC1 + +/* command bytes */ +#define TUNER_REG_READ 0x03 +#define TUNER_REG_WRITE 0x04 + +#define RC_VAL_READ 0x05 + #define RC_NO_KEY 0x44 + +#define SET_TUNER_POWER 0x06 +#define CHECK_TUNER_POWER 0x12 + #define Tuner_Power_ON 1 + #define Tuner_Power_OFF 0 + +#define GET_USB_SPEED 0x07 + #define USB_SPEED_LOW 0 + #define USB_SPEED_FULL 1 + #define USB_SPEED_HIGH 2 + +#define LOCK_TUNER_COMMAND 0x09 + +#define TUNER_SIGNAL_READ 0x0A + +/* FX2 eeprom */ +#define SET_EE_VALUE 0x10 +#define GET_EE_VALUE 0x11 + #define FX2_ID_ADDR 0x00 + #define VID_MSB_ADDR 0x02 + #define VID_LSB_ADDR 0x01 + #define PID_MSB_ADDR 0x04 + #define PID_LSB_ADDR 0x03 + #define MAC_0_ADDR 0x07 + #define MAC_1_ADDR 0x08 + #define MAC_2_ADDR 0x09 + #define MAC_3_ADDR 0x0a + #define MAC_4_ADDR 0x0b + #define MAC_5_ADDR 0x0c + +#define RESET_FX2 0x13 + +#define FW_VERSION_READ 0x0B +#define VENDOR_STRING_READ 0x0C +#define PRODUCT_STRING_READ 0x0D +#define FW_BCD_VERSION_READ 0x14 + +extern struct dvb_frontend * vp7045_fe_attach(struct dvb_usb_device *d); +extern int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, int inlen,int msec); +extern u8 vp7045_read_reg(struct dvb_usb_device *d, u8 reg); + +#endif |