diff options
Diffstat (limited to 'drivers/media/pci/cx23885')
32 files changed, 15531 insertions, 0 deletions
diff --git a/drivers/media/pci/cx23885/Kconfig b/drivers/media/pci/cx23885/Kconfig new file mode 100644 index 00000000000..b391e9bda87 --- /dev/null +++ b/drivers/media/pci/cx23885/Kconfig @@ -0,0 +1,46 @@ +config VIDEO_CX23885 + tristate "Conexant cx23885 (2388x successor) support" + depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT && SND + select SND_PCM + select I2C_ALGOBIT + select VIDEO_BTCX + select VIDEO_TUNER + select VIDEO_TVEEPROM + depends on RC_CORE + select VIDEOBUF_DVB + select VIDEOBUF_DMA_SG + select VIDEO_CX25840 + select VIDEO_CX2341X + select DVB_DIB7000P if !DVB_FE_CUSTOMISE + select DVB_S5H1409 if !DVB_FE_CUSTOMISE + select DVB_S5H1411 if !DVB_FE_CUSTOMISE + select DVB_LGDT330X if !DVB_FE_CUSTOMISE + select DVB_ZL10353 if !DVB_FE_CUSTOMISE + select DVB_TDA10048 if !DVB_FE_CUSTOMISE + select DVB_LNBP21 if !DVB_FE_CUSTOMISE + select DVB_STV6110 if !DVB_FE_CUSTOMISE + select DVB_CX24116 if !DVB_FE_CUSTOMISE + select DVB_STV0900 if !DVB_FE_CUSTOMISE + select DVB_DS3000 if !DVB_FE_CUSTOMISE + select DVB_STV0367 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MT2131 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_TDA18271 if !MEDIA_TUNER_CUSTOMISE + select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMISE + ---help--- + This is a video4linux driver for Conexant 23885 based + TV cards. + + To compile this driver as a module, choose M here: the + module will be called cx23885 + +config MEDIA_ALTERA_CI + tristate "Altera FPGA based CI module" + depends on VIDEO_CX23885 && DVB_CORE + select ALTERA_STAPL + ---help--- + An Altera FPGA CI module for NetUP Dual DVB-T/C RF CI card. + + To compile this driver as a module, choose M here: the + module will be called altera-ci diff --git a/drivers/media/pci/cx23885/Makefile b/drivers/media/pci/cx23885/Makefile new file mode 100644 index 00000000000..f92cc4c14f0 --- /dev/null +++ b/drivers/media/pci/cx23885/Makefile @@ -0,0 +1,15 @@ +cx23885-objs := cx23885-cards.o cx23885-video.o cx23885-vbi.o \ + cx23885-core.o cx23885-i2c.o cx23885-dvb.o cx23885-417.o \ + cx23885-ioctl.o cx23885-ir.o cx23885-av.o cx23885-input.o \ + cx23888-ir.o netup-init.o cimax2.o netup-eeprom.o \ + cx23885-f300.o cx23885-alsa.o + +obj-$(CONFIG_VIDEO_CX23885) += cx23885.o +obj-$(CONFIG_MEDIA_ALTERA_CI) += altera-ci.o + +ccflags-y += -Idrivers/media/video +ccflags-y += -Idrivers/media/tuners +ccflags-y += -Idrivers/media/dvb-core +ccflags-y += -Idrivers/media/dvb-frontends + +ccflags-y += $(extra-cflags-y) $(extra-cflags-m) diff --git a/drivers/media/pci/cx23885/altera-ci.c b/drivers/media/pci/cx23885/altera-ci.c new file mode 100644 index 00000000000..1fa8927f0d3 --- /dev/null +++ b/drivers/media/pci/cx23885/altera-ci.c @@ -0,0 +1,837 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010,2011 NetUP Inc. + * Copyright (C) 2010,2011 Igor M. Liplianin <liplianin@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * currently cx23885 GPIO's used. + * GPIO-0 ~INT in + * GPIO-1 TMS out + * GPIO-2 ~reset chips out + * GPIO-3 to GPIO-10 data/addr for CA in/out + * GPIO-11 ~CS out + * GPIO-12 AD_RG out + * GPIO-13 ~WR out + * GPIO-14 ~RD out + * GPIO-15 ~RDY in + * GPIO-16 TCK out + * GPIO-17 TDO in + * GPIO-18 TDI out + */ +/* + * Bit definitions for MC417_RWD and MC417_OEN registers + * bits 31-16 + * +-----------+ + * | Reserved | + * +-----------+ + * bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | TDI | TDO | TCK | RDY# | #RD | #WR | AD_RG | #CS | + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + */ +#include <media/videobuf-dma-sg.h> +#include <media/videobuf-dvb.h> +#include "altera-ci.h" +#include "dvb_ca_en50221.h" + +/* FPGA regs */ +#define NETUP_CI_INT_CTRL 0x00 +#define NETUP_CI_BUSCTRL2 0x01 +#define NETUP_CI_ADDR0 0x04 +#define NETUP_CI_ADDR1 0x05 +#define NETUP_CI_DATA 0x06 +#define NETUP_CI_BUSCTRL 0x07 +#define NETUP_CI_PID_ADDR0 0x08 +#define NETUP_CI_PID_ADDR1 0x09 +#define NETUP_CI_PID_DATA 0x0a +#define NETUP_CI_TSA_DIV 0x0c +#define NETUP_CI_TSB_DIV 0x0d +#define NETUP_CI_REVISION 0x0f + +/* const for ci op */ +#define NETUP_CI_FLG_CTL 1 +#define NETUP_CI_FLG_RD 1 +#define NETUP_CI_FLG_AD 1 + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +static unsigned int pid_dbg; +module_param(pid_dbg, int, 0644); +MODULE_PARM_DESC(pid_dbg, "Enable PID filtering debugging"); + +MODULE_DESCRIPTION("altera FPGA CI module"); +MODULE_AUTHOR("Igor M. Liplianin <liplianin@netup.ru>"); +MODULE_LICENSE("GPL"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define pid_dbg_print(args...) \ + do { \ + if (pid_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +struct altera_ci_state; +struct netup_hw_pid_filter; + +struct fpga_internal { + void *dev; + struct mutex fpga_mutex;/* two CI's on the same fpga */ + struct netup_hw_pid_filter *pid_filt[2]; + struct altera_ci_state *state[2]; + struct work_struct work; + int (*fpga_rw) (void *dev, int flag, int data, int rw); + int cis_used; + int filts_used; + int strt_wrk; +}; + +/* stores all private variables for communication with CI */ +struct altera_ci_state { + struct fpga_internal *internal; + struct dvb_ca_en50221 ca; + int status; + int nr; +}; + +/* stores all private variables for hardware pid filtering */ +struct netup_hw_pid_filter { + struct fpga_internal *internal; + struct dvb_demux *demux; + /* save old functions */ + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + + int status; + int nr; +}; + +/* internal params node */ +struct fpga_inode { + /* pointer for internal params, one for each pair of CI's */ + struct fpga_internal *internal; + struct fpga_inode *next_inode; +}; + +/* first internal params */ +static struct fpga_inode *fpga_first_inode; + +/* find chip by dev */ +static struct fpga_inode *find_inode(void *dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + + if (temp_chip == NULL) + return temp_chip; + + /* + Search for the last fpga CI chip or + find it by dev */ + while ((temp_chip != NULL) && + (temp_chip->internal->dev != dev)) + temp_chip = temp_chip->next_inode; + + return temp_chip; +} +/* check demux */ +static struct fpga_internal *check_filter(struct fpga_internal *temp_int, + void *demux_dev, int filt_nr) +{ + if (temp_int == NULL) + return NULL; + + if ((temp_int->pid_filt[filt_nr]) == NULL) + return NULL; + + if (temp_int->pid_filt[filt_nr]->demux == demux_dev) + return temp_int; + + return NULL; +} + +/* find chip by demux */ +static struct fpga_inode *find_dinode(void *demux_dev) +{ + struct fpga_inode *temp_chip = fpga_first_inode; + struct fpga_internal *temp_int; + + /* + * Search of the last fpga CI chip or + * find it by demux + */ + while (temp_chip != NULL) { + if (temp_chip->internal != NULL) { + temp_int = temp_chip->internal; + if (check_filter(temp_int, demux_dev, 0)) + break; + if (check_filter(temp_int, demux_dev, 1)) + break; + } + + temp_chip = temp_chip->next_inode; + } + + return temp_chip; +} + +/* deallocating chip */ +static void remove_inode(struct fpga_internal *internal) +{ + struct fpga_inode *prev_node = fpga_first_inode; + struct fpga_inode *del_node = find_inode(internal->dev); + + if (del_node != NULL) { + if (del_node == fpga_first_inode) { + fpga_first_inode = del_node->next_inode; + } else { + while (prev_node->next_inode != del_node) + prev_node = prev_node->next_inode; + + if (del_node->next_inode == NULL) + prev_node->next_inode = NULL; + else + prev_node->next_inode = + prev_node->next_inode->next_inode; + } + + kfree(del_node); + } +} + +/* allocating new chip */ +static struct fpga_inode *append_internal(struct fpga_internal *internal) +{ + struct fpga_inode *new_node = fpga_first_inode; + + if (new_node == NULL) { + new_node = kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + fpga_first_inode = new_node; + } else { + while (new_node->next_inode != NULL) + new_node = new_node->next_inode; + + new_node->next_inode = + kmalloc(sizeof(struct fpga_inode), GFP_KERNEL); + if (new_node->next_inode != NULL) + new_node = new_node->next_inode; + else + new_node = NULL; + } + + if (new_node != NULL) { + new_node->internal = internal; + new_node->next_inode = NULL; + } + + return new_node; +} + +static int netup_fpga_op_rw(struct fpga_internal *inter, int addr, + u8 val, u8 read) +{ + inter->fpga_rw(inter->dev, NETUP_CI_FLG_AD, addr, 0); + return inter->fpga_rw(inter->dev, 0, val, read); +} + +/* flag - mem/io, read - read/write */ +int altera_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 val) +{ + + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + + u8 store; + int mem = 0; + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_ADDR0, ((addr << 1) & 0xfe), 0); + netup_fpga_op_rw(inter, NETUP_CI_ADDR1, ((addr >> 7) & 0x7f), 0); + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + store &= 0x0f; + store |= ((state->nr << 7) | (flag << 6)); + + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, store, 0); + mem = netup_fpga_op_rw(inter, NETUP_CI_DATA, val, read); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: %s: addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", addr, + (flag == NETUP_CI_FLG_CTL) ? "ctl" : "mem", + (read) ? mem : val); + + return mem; +} + +int altera_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return altera_ci_op_cam(en50221, slot, 0, NETUP_CI_FLG_RD, addr, 0); +} + +int altera_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +int altera_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, + NETUP_CI_FLG_RD, addr, 0); +} + +int altera_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return altera_ci_op_cam(en50221, slot, NETUP_CI_FLG_CTL, 0, addr, data); +} + +int altera_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + /* reasonable timeout for CI reset is 10 seconds */ + unsigned long t_out = jiffies + msecs_to_jiffies(9999); + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0xcf) | (1 << (5 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + for (;;) { + mdelay(50); + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + 0, NETUP_CI_FLG_RD); + mutex_unlock(&inter->fpga_mutex); + + if ((ret & (1 << (5 - state->nr))) == 0) + break; + if (time_after(jiffies, t_out)) + break; + } + + + ci_dbg_print("%s: %d msecs\n", __func__, + jiffies_to_msecs(jiffies + msecs_to_jiffies(9999) - t_out)); + + return 0; +} + +int altera_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +int altera_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct altera_ci_state *state = en50221->data; + struct fpga_internal *inter = state->internal; + int ret; + + ci_dbg_print("%s\n", __func__); + + if (0 != slot) + return -EINVAL; + + mutex_lock(&inter->fpga_mutex); + + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, + (ret & 0x0f) | (1 << (3 - state->nr)), 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct fpga_internal *inter = + container_of(work, struct fpga_internal, work); + int ret; + + ci_dbg_print("%s\n", __func__); + + mutex_lock(&inter->fpga_mutex); + /* ack' irq */ + ret = netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0, NETUP_CI_FLG_RD); + ret = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL, 0, NETUP_CI_FLG_RD); + + mutex_unlock(&inter->fpga_mutex); + + if (inter->state[1] != NULL) { + inter->state[1]->status = + ((ret & 1) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[1] status = 0x%x\n", + __func__, inter->state[1]->status); + }; + + if (inter->state[0] != NULL) { + inter->state[0]->status = + ((ret & 2) == 0 ? + DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY : 0); + ci_dbg_print("%s: setting CI[0] status = 0x%x\n", + __func__, inter->state[0]->status); + }; +} + +/* CI irq handler */ +int altera_ci_irq(void *dev) +{ + struct fpga_inode *temp_int = NULL; + struct fpga_internal *inter = NULL; + + ci_dbg_print("%s\n", __func__); + + if (dev != NULL) { + temp_int = find_inode(dev); + if (temp_int != NULL) { + inter = temp_int->internal; + schedule_work(&inter->work); + } + } + + return 1; +} +EXPORT_SYMBOL(altera_ci_irq); + +int altera_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, + int open) +{ + struct altera_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + return state->status; +} + +void altera_hw_filt_release(void *main_dev, int filt_nr) +{ + struct fpga_inode *temp_int = find_inode(main_dev); + struct netup_hw_pid_filter *pid_filt = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + pid_filt = temp_int->internal->pid_filt[filt_nr - 1]; + /* stored old feed controls */ + pid_filt->demux->start_feed = pid_filt->start_feed; + pid_filt->demux->stop_feed = pid_filt->stop_feed; + + if (((--(temp_int->internal->filts_used)) <= 0) && + ((temp_int->internal->cis_used) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(pid_filt->internal); + } + + kfree(pid_filt); + + } + +} +EXPORT_SYMBOL(altera_hw_filt_release); + +void altera_ci_release(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct altera_ci_state *state = NULL; + + ci_dbg_print("%s\n", __func__); + + if (temp_int != NULL) { + state = temp_int->internal->state[ci_nr - 1]; + altera_hw_filt_release(dev, ci_nr); + + + if (((temp_int->internal->filts_used) <= 0) && + ((--(temp_int->internal->cis_used)) <= 0)) { + + ci_dbg_print("%s: Actually removing\n", __func__); + + remove_inode(temp_int->internal); + kfree(state->internal); + } + + if (state != NULL) { + if (state->ca.data != NULL) + dvb_ca_en50221_release(&state->ca); + + kfree(state); + } + } + +} +EXPORT_SYMBOL(altera_ci_release); + +static void altera_pid_control(struct netup_hw_pid_filter *pid_filt, + u16 pid, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + + /* pid 0-0x1f always enabled, don't touch them */ + if ((pid == 0x2000) || (pid < 0x20)) + return; + + mutex_lock(&inter->fpga_mutex); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, (pid >> 3) & 0xff, 0); + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((pid >> 11) & 0x03) | (pid_filt->nr << 2), 0); + + store = netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, 0, NETUP_CI_FLG_RD); + + if (onoff)/* 0 - on, 1 - off */ + store |= (1 << (pid & 7)); + else + store &= ~(1 << (pid & 7)); + + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + pid_dbg_print("%s: (%d) set pid: %5d 0x%04x '%s'\n", __func__, + pid_filt->nr, pid, pid, onoff ? "off" : "on"); +} + +static void altera_toggle_fullts_streaming(struct netup_hw_pid_filter *pid_filt, + int filt_nr, int onoff) +{ + struct fpga_internal *inter = pid_filt->internal; + u8 store = 0; + int i; + + pid_dbg_print("%s: pid_filt->nr[%d] now %s\n", __func__, pid_filt->nr, + onoff ? "off" : "on"); + + if (onoff)/* 0 - on, 1 - off */ + store = 0xff;/* ignore pid */ + else + store = 0;/* enable pid */ + + mutex_lock(&inter->fpga_mutex); + + for (i = 0; i < 1024; i++) { + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR0, i & 0xff, 0); + + netup_fpga_op_rw(inter, NETUP_CI_PID_ADDR1, + ((i >> 8) & 0x03) | (pid_filt->nr << 2), 0); + /* pid 0-0x1f always enabled */ + netup_fpga_op_rw(inter, NETUP_CI_PID_DATA, + (i > 3 ? store : 0), 0); + } + + mutex_unlock(&inter->fpga_mutex); +} + +int altera_pid_feed_control(void *demux_dev, int filt_nr, + struct dvb_demux_feed *feed, int onoff) +{ + struct fpga_inode *temp_int = find_dinode(demux_dev); + struct fpga_internal *inter = temp_int->internal; + struct netup_hw_pid_filter *pid_filt = inter->pid_filt[filt_nr - 1]; + + altera_pid_control(pid_filt, feed->pid, onoff ? 0 : 1); + /* call old feed proc's */ + if (onoff) + pid_filt->start_feed(feed); + else + pid_filt->stop_feed(feed); + + if (feed->pid == 0x2000) + altera_toggle_fullts_streaming(pid_filt, filt_nr, + onoff ? 0 : 1); + + return 0; +} +EXPORT_SYMBOL(altera_pid_feed_control); + +int altera_ci_start_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 1); + + return 0; +} + +int altera_ci_stop_feed(struct dvb_demux_feed *feed, int num) +{ + altera_pid_feed_control(feed->demux, num, feed, 0); + + return 0; +} + +int altera_ci_start_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 1); +} + +int altera_ci_stop_feed_1(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 1); +} + +int altera_ci_start_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_start_feed(feed, 2); +} + +int altera_ci_stop_feed_2(struct dvb_demux_feed *feed) +{ + return altera_ci_stop_feed(feed, 2); +} + +int altera_hw_filt_init(struct altera_ci_config *config, int hw_filt_nr) +{ + struct netup_hw_pid_filter *pid_filt = NULL; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + + pid_filt = kzalloc(sizeof(struct netup_hw_pid_filter), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!pid_filt) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->filts_used)++; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->filts_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting hw pid filter = %p for ci = %d\n", __func__, + pid_filt, hw_filt_nr - 1); + inter->pid_filt[hw_filt_nr - 1] = pid_filt; + pid_filt->demux = config->demux; + pid_filt->internal = inter; + pid_filt->nr = hw_filt_nr - 1; + /* store old feed controls */ + pid_filt->start_feed = config->demux->start_feed; + pid_filt->stop_feed = config->demux->stop_feed; + /* replace with new feed controls */ + if (hw_filt_nr == 1) { + pid_filt->demux->start_feed = altera_ci_start_feed_1; + pid_filt->demux->stop_feed = altera_ci_stop_feed_1; + } else if (hw_filt_nr == 2) { + pid_filt->demux->start_feed = altera_ci_start_feed_2; + pid_filt->demux->stop_feed = altera_ci_stop_feed_2; + } + + altera_toggle_fullts_streaming(pid_filt, 0, 1); + + return 0; +err: + ci_dbg_print("%s: Can't init hardware filter: Error %d\n", + __func__, ret); + + kfree(pid_filt); + + return ret; +} +EXPORT_SYMBOL(altera_hw_filt_init); + +int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + struct altera_ci_state *state; + struct fpga_inode *temp_int = find_inode(config->dev); + struct fpga_internal *inter = NULL; + int ret = 0; + u8 store = 0; + + state = kzalloc(sizeof(struct altera_ci_state), GFP_KERNEL); + + ci_dbg_print("%s\n", __func__); + + if (!state) { + ret = -ENOMEM; + goto err; + } + + if (temp_int != NULL) { + inter = temp_int->internal; + (inter->cis_used)++; + ci_dbg_print("%s: Find Internal Structure!\n", __func__); + } else { + inter = kzalloc(sizeof(struct fpga_internal), GFP_KERNEL); + if (!inter) { + ret = -ENOMEM; + goto err; + } + + temp_int = append_internal(inter); + inter->cis_used = 1; + inter->dev = config->dev; + inter->fpga_rw = config->fpga_rw; + mutex_init(&inter->fpga_mutex); + inter->strt_wrk = 1; + ci_dbg_print("%s: Create New Internal Structure!\n", __func__); + } + + ci_dbg_print("%s: setting state = %p for ci = %d\n", __func__, + state, ci_nr - 1); + inter->state[ci_nr - 1] = state; + state->internal = inter; + state->nr = ci_nr - 1; + + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = altera_ci_read_attribute_mem; + state->ca.write_attribute_mem = altera_ci_write_attribute_mem; + state->ca.read_cam_control = altera_ci_read_cam_ctl; + state->ca.write_cam_control = altera_ci_write_cam_ctl; + state->ca.slot_reset = altera_ci_slot_reset; + state->ca.slot_shutdown = altera_ci_slot_shutdown; + state->ca.slot_ts_enable = altera_ci_slot_ts_ctl; + state->ca.poll_slot_status = altera_poll_ci_slot_status; + state->ca.data = state; + + ret = dvb_ca_en50221_init(config->adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + altera_hw_filt_init(config, ci_nr); + + if (inter->strt_wrk) { + INIT_WORK(&inter->work, netup_read_ci_status); + inter->strt_wrk = 0; + } + + ci_dbg_print("%s: CI initialized!\n", __func__); + + mutex_lock(&inter->fpga_mutex); + + /* Enable div */ + netup_fpga_op_rw(inter, NETUP_CI_TSA_DIV, 0x0, 0); + netup_fpga_op_rw(inter, NETUP_CI_TSB_DIV, 0x0, 0); + + /* enable TS out */ + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store |= (3 << 4); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + ret = netup_fpga_op_rw(inter, NETUP_CI_REVISION, 0, NETUP_CI_FLG_RD); + /* enable irq */ + netup_fpga_op_rw(inter, NETUP_CI_INT_CTRL, 0x44, 0); + + mutex_unlock(&inter->fpga_mutex); + + ci_dbg_print("%s: NetUP CI Revision = 0x%x\n", __func__, ret); + + schedule_work(&inter->work); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + + kfree(state); + + return ret; +} +EXPORT_SYMBOL(altera_ci_init); + +int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + struct fpga_inode *temp_int = find_inode(dev); + struct fpga_internal *inter = NULL; + u8 store; + + ci_dbg_print("%s\n", __func__); + + if (temp_int == NULL) + return -1; + + if (temp_int->internal == NULL) + return -1; + + inter = temp_int->internal; + + mutex_lock(&inter->fpga_mutex); + + store = netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, 0, NETUP_CI_FLG_RD); + store &= ~(4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + msleep(100); + store |= (4 << (2 - ci_nr)); + netup_fpga_op_rw(inter, NETUP_CI_BUSCTRL2, store, 0); + + mutex_unlock(&inter->fpga_mutex); + + return 0; +} +EXPORT_SYMBOL(altera_ci_tuner_reset); diff --git a/drivers/media/pci/cx23885/altera-ci.h b/drivers/media/pci/cx23885/altera-ci.h new file mode 100644 index 00000000000..70e4fd69ad9 --- /dev/null +++ b/drivers/media/pci/cx23885/altera-ci.h @@ -0,0 +1,100 @@ +/* + * altera-ci.c + * + * CI driver in conjunction with NetUp Dual DVB-T/C RF CI card + * + * Copyright (C) 2010 NetUP Inc. + * Copyright (C) 2010 Igor M. Liplianin <liplianin@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#ifndef __ALTERA_CI_H +#define __ALTERA_CI_H + +#define ALT_DATA 0x000000ff +#define ALT_TDI 0x00008000 +#define ALT_TDO 0x00004000 +#define ALT_TCK 0x00002000 +#define ALT_RDY 0x00001000 +#define ALT_RD 0x00000800 +#define ALT_WR 0x00000400 +#define ALT_AD_RG 0x00000200 +#define ALT_CS 0x00000100 + +struct altera_ci_config { + void *dev;/* main dev, for example cx23885_dev */ + void *adapter;/* for CI to connect to */ + struct dvb_demux *demux;/* for hardware PID filter to connect to */ + int (*fpga_rw) (void *dev, int ad_rg, int val, int rw); +}; + +#if defined(CONFIG_MEDIA_ALTERA_CI) || (defined(CONFIG_MEDIA_ALTERA_CI_MODULE) \ + && defined(MODULE)) + +extern int altera_ci_init(struct altera_ci_config *config, int ci_nr); +extern void altera_ci_release(void *dev, int ci_nr); +extern int altera_ci_irq(void *dev); +extern int altera_ci_tuner_reset(void *dev, int ci_nr); + +#else + +static inline int altera_ci_init(struct altera_ci_config *config, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_ci_release(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_ci_irq(void *dev) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline int altera_ci_tuner_reset(void *dev, int ci_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif +#if 0 +static inline int altera_hw_filt_init(struct altera_ci_config *config, + int hw_filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +static inline void altera_hw_filt_release(void *dev, int filt_nr) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); +} + +static inline int altera_pid_feed_control(void *dev, int filt_nr, + struct dvb_demux_feed *dvbdmxfeed, int onoff) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return 0; +} + +#endif /* CONFIG_MEDIA_ALTERA_CI */ + +#endif /* __ALTERA_CI_H */ diff --git a/drivers/media/pci/cx23885/cimax2.c b/drivers/media/pci/cx23885/cimax2.c new file mode 100644 index 00000000000..c9f15d6dec4 --- /dev/null +++ b/drivers/media/pci/cx23885/cimax2.c @@ -0,0 +1,536 @@ +/* + * cimax2.c + * + * CIMax2(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include "dvb_ca_en50221.h" +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| WR# | RD# | | ACK# | ADHI | ADLO | CS1# | CS0# | ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| DATA7| DATA6| DATA5| DATA4| DATA3| DATA2| DATA1| DATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +/* MC417 */ +#define NETUP_DATA 0x000000ff +#define NETUP_WR 0x00008000 +#define NETUP_RD 0x00004000 +#define NETUP_ACK 0x00001000 +#define NETUP_ADHI 0x00000800 +#define NETUP_ADLO 0x00000400 +#define NETUP_CS1 0x00000200 +#define NETUP_CS0 0x00000100 +#define NETUP_EN_ALL 0x00001000 +#define NETUP_CTRL_OFF (NETUP_CS1 | NETUP_CS0 | NETUP_WR | NETUP_RD) +#define NETUP_CI_CTL 0x04 +#define NETUP_CI_RD 1 + +#define NETUP_IRQ_DETAM 0x1 +#define NETUP_IRQ_IRQAM 0x4 + +static unsigned int ci_dbg; +module_param(ci_dbg, int, 0644); +MODULE_PARM_DESC(ci_dbg, "Enable CI debugging"); + +static unsigned int ci_irq_enable; +module_param(ci_irq_enable, int, 0644); +MODULE_PARM_DESC(ci_irq_enable, "Enable IRQ from CAM"); + +#define ci_dbg_print(args...) \ + do { \ + if (ci_dbg) \ + printk(KERN_DEBUG args); \ + } while (0) + +#define ci_irq_flags() (ci_irq_enable ? NETUP_IRQ_IRQAM : 0) + +/* stores all private variables for communication with CI */ +struct netup_ci_state { + struct dvb_ca_en50221 ca; + struct mutex ca_mutex; + struct i2c_adapter *i2c_adap; + u8 ci_i2c_addr; + int status; + struct work_struct work; + void *priv; + u8 current_irq_mode; + int current_ci_flag; + unsigned long next_status_checked_time; +}; + + +int netup_read_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = addr, + .flags = 0, + .buf = ®, + .len = 1 + }, { + .addr = addr, + .flags = I2C_M_RD, + .buf = buf, + .len = len + } + }; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + ci_dbg_print("%s: i2c read error, Reg = 0x%02x, Status = %d\n", + __func__, reg, ret); + + return -1; + } + + ci_dbg_print("%s: i2c read Addr=0x%04x, Reg = 0x%02x, data = %02x\n", + __func__, addr, reg, buf[0]); + + return 0; +} + +int netup_write_i2c(struct i2c_adapter *i2c_adap, u8 addr, u8 reg, + u8 *buf, int len) +{ + int ret; + u8 buffer[len + 1]; + + struct i2c_msg msg = { + .addr = addr, + .flags = 0, + .buf = &buffer[0], + .len = len + 1 + }; + + buffer[0] = reg; + memcpy(&buffer[1], buf, len); + + ret = i2c_transfer(i2c_adap, &msg, 1); + + if (ret != 1) { + ci_dbg_print("%s: i2c write error, Reg=[0x%02x], Status=%d\n", + __func__, reg, ret); + return -1; + } + + return 0; +} + +int netup_ci_get_mem(struct cx23885_dev *dev) +{ + int mem; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & NETUP_ACK) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, NETUP_CTRL_OFF); + + return mem & 0xff; +} + +int netup_ci_op_cam(struct dvb_ca_en50221 *en50221, int slot, + u8 flag, u8 read, int addr, u8 data) +{ + struct netup_ci_state *state = en50221->data; + struct cx23885_tsport *port = state->priv; + struct cx23885_dev *dev = port->dev; + + u8 store; + int mem; + int ret; + + if (0 != slot) + return -EINVAL; + + if (state->current_ci_flag != flag) { + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + + store &= ~0x0c; + store |= flag; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &store, 1); + if (ret != 0) + return ret; + }; + state->current_ci_flag = flag; + + mutex_lock(&dev->gpio_lock); + + /* write addr */ + cx_write(MC417_OEN, NETUP_EN_ALL); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADLO | (0xff & addr)); + cx_clear(MC417_RWD, NETUP_ADLO); + cx_write(MC417_RWD, NETUP_CTRL_OFF | + NETUP_ADHI | (0xff & (addr >> 8))); + cx_clear(MC417_RWD, NETUP_ADHI); + + if (read) { /* data in */ + cx_write(MC417_OEN, NETUP_EN_ALL | NETUP_DATA); + } else /* data out */ + cx_write(MC417_RWD, NETUP_CTRL_OFF | data); + + /* choose chip */ + cx_clear(MC417_RWD, + (state->ci_i2c_addr == 0x40) ? NETUP_CS0 : NETUP_CS1); + /* read/write */ + cx_clear(MC417_RWD, (read) ? NETUP_RD : NETUP_WR); + mem = netup_ci_get_mem(dev); + + mutex_unlock(&dev->gpio_lock); + + if (!read) + if (mem < 0) + return -EREMOTEIO; + + ci_dbg_print("%s: %s: chipaddr=[0x%x] addr=[0x%02x], %s=%x\n", __func__, + (read) ? "read" : "write", state->ci_i2c_addr, addr, + (flag == NETUP_CI_CTL) ? "ctl" : "mem", + (read) ? mem : data); + + if (read) + return mem; + + return 0; +} + +int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr) +{ + return netup_ci_op_cam(en50221, slot, 0, NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, 0, 0, addr, data); +} + +int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, u8 addr) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, + NETUP_CI_RD, addr, 0); +} + +int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, int slot, + u8 addr, u8 data) +{ + return netup_ci_op_cam(en50221, slot, NETUP_CI_CTL, 0, addr, data); +} + +int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf = 0x80; + int ret; + + if (0 != slot) + return -EINVAL; + + udelay(500); + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + if (ret != 0) + return ret; + + udelay(500); + + buf = 0x00; + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + + msleep(1000); + dvb_ca_en50221_camready_irq(&state->ca, 0); + + return 0; + +} + +int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot) +{ + /* not implemented */ + return 0; +} + +int netup_ci_set_irq(struct dvb_ca_en50221 *en50221, u8 irq_mode) +{ + struct netup_ci_state *state = en50221->data; + int ret; + + if (irq_mode == state->current_irq_mode) + return 0; + + ci_dbg_print("%s: chipaddr=[0x%x] setting ci IRQ to [0x%x] \n", + __func__, state->ci_i2c_addr, irq_mode); + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x1b, &irq_mode, 1); + + if (ret != 0) + return ret; + + state->current_irq_mode = irq_mode; + + return 0; +} + +int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot) +{ + struct netup_ci_state *state = en50221->data; + u8 buf; + + if (0 != slot) + return -EINVAL; + + netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); + buf |= 0x60; + + return netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf, 1); +} + +/* work handler */ +static void netup_read_ci_status(struct work_struct *work) +{ + struct netup_ci_state *state = + container_of(work, struct netup_ci_state, work); + u8 buf[33]; + int ret; + + /* CAM module IRQ processing. fast operation */ + dvb_ca_en50221_frda_irq(&state->ca, 0); + + /* CAM module INSERT/REMOVE processing. slow operation because of i2c + * transfers */ + if (time_after(jiffies, state->next_status_checked_time) + || !state->status) { + ret = netup_read_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &buf[0], 33); + + state->next_status_checked_time = jiffies + + msecs_to_jiffies(1000); + + if (ret != 0) + return; + + ci_dbg_print("%s: Slot Status Addr=[0x%04x], " + "Reg=[0x%02x], data=%02x, " + "TS config = %02x\n", __func__, + state->ci_i2c_addr, 0, buf[0], + buf[0]); + + + if (buf[0] & 1) + state->status = DVB_CA_EN50221_POLL_CAM_PRESENT | + DVB_CA_EN50221_POLL_CAM_READY; + else + state->status = 0; + } +} + +/* CI irq handler */ +int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status) +{ + struct cx23885_tsport *port = NULL; + struct netup_ci_state *state = NULL; + + ci_dbg_print("%s:\n", __func__); + + if (0 == (pci_status & (PCI_MSK_GPIO0 | PCI_MSK_GPIO1))) + return 0; + + if (pci_status & PCI_MSK_GPIO0) { + port = &dev->ts1; + state = port->port_priv; + schedule_work(&state->work); + ci_dbg_print("%s: Wakeup CI0\n", __func__); + } + + if (pci_status & PCI_MSK_GPIO1) { + port = &dev->ts2; + state = port->port_priv; + schedule_work(&state->work); + ci_dbg_print("%s: Wakeup CI1\n", __func__); + } + + return 1; +} + +int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, int slot, int open) +{ + struct netup_ci_state *state = en50221->data; + + if (0 != slot) + return -EINVAL; + + netup_ci_set_irq(en50221, open ? (NETUP_IRQ_DETAM | ci_irq_flags()) + : NETUP_IRQ_DETAM); + + return state->status; +} + +int netup_ci_init(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + u8 cimax_init[34] = { + 0x00, /* module A control*/ + 0x00, /* auto select mask high A */ + 0x00, /* auto select mask low A */ + 0x00, /* auto select pattern high A */ + 0x00, /* auto select pattern low A */ + 0x44, /* memory access time A */ + 0x00, /* invert input A */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* module B control*/ + 0x00, /* auto select mask high B */ + 0x00, /* auto select mask low B */ + 0x00, /* auto select pattern high B */ + 0x00, /* auto select pattern low B */ + 0x44, /* memory access time B */ + 0x00, /* invert input B */ + 0x00, /* RFU */ + 0x00, /* RFU */ + 0x00, /* auto select mask high Ext */ + 0x00, /* auto select mask low Ext */ + 0x00, /* auto select pattern high Ext */ + 0x00, /* auto select pattern low Ext */ + 0x00, /* RFU */ + 0x02, /* destination - module A */ + 0x01, /* power on (use it like store place) */ + 0x00, /* RFU */ + 0x00, /* int status read only */ + ci_irq_flags() | NETUP_IRQ_DETAM, /* DETAM, IRQAM unmasked */ + 0x05, /* EXTINT=active-high, INT=push-pull */ + 0x00, /* USCG1 */ + 0x04, /* ack active low */ + 0x00, /* LOCK = 0 */ + 0x33, /* serial mode, rising in, rising out, MSB first*/ + 0x31, /* synchronization */ + }; + int ret; + + ci_dbg_print("%s\n", __func__); + state = kzalloc(sizeof(struct netup_ci_state), GFP_KERNEL); + if (!state) { + ci_dbg_print("%s: Unable create CI structure!\n", __func__); + ret = -ENOMEM; + goto err; + } + + port->port_priv = state; + + switch (port->nr) { + case 1: + state->ci_i2c_addr = 0x40; + break; + case 2: + state->ci_i2c_addr = 0x41; + break; + } + + state->i2c_adap = &port->dev->i2c_bus[0].i2c_adap; + state->ca.owner = THIS_MODULE; + state->ca.read_attribute_mem = netup_ci_read_attribute_mem; + state->ca.write_attribute_mem = netup_ci_write_attribute_mem; + state->ca.read_cam_control = netup_ci_read_cam_ctl; + state->ca.write_cam_control = netup_ci_write_cam_ctl; + state->ca.slot_reset = netup_ci_slot_reset; + state->ca.slot_shutdown = netup_ci_slot_shutdown; + state->ca.slot_ts_enable = netup_ci_slot_ts_ctl; + state->ca.poll_slot_status = netup_poll_ci_slot_status; + state->ca.data = state; + state->priv = port; + state->current_irq_mode = ci_irq_flags() | NETUP_IRQ_DETAM; + + ret = netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0, &cimax_init[0], 34); + /* lock registers */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x1f, &cimax_init[0x18], 1); + /* power on slots */ + ret |= netup_write_i2c(state->i2c_adap, state->ci_i2c_addr, + 0x18, &cimax_init[0x18], 1); + + if (0 != ret) + goto err; + + ret = dvb_ca_en50221_init(&port->frontends.adapter, + &state->ca, + /* flags */ 0, + /* n_slots */ 1); + if (0 != ret) + goto err; + + INIT_WORK(&state->work, netup_read_ci_status); + schedule_work(&state->work); + + ci_dbg_print("%s: CI initialized!\n", __func__); + + return 0; +err: + ci_dbg_print("%s: Cannot initialize CI: Error %d.\n", __func__, ret); + kfree(state); + return ret; +} + +void netup_ci_exit(struct cx23885_tsport *port) +{ + struct netup_ci_state *state; + + if (NULL == port) + return; + + state = (struct netup_ci_state *)port->port_priv; + if (NULL == state) + return; + + if (NULL == state->ca.data) + return; + + dvb_ca_en50221_release(&state->ca); + kfree(state); +} diff --git a/drivers/media/pci/cx23885/cimax2.h b/drivers/media/pci/cx23885/cimax2.h new file mode 100644 index 00000000000..518744a4c8a --- /dev/null +++ b/drivers/media/pci/cx23885/cimax2.h @@ -0,0 +1,47 @@ +/* + * cimax2.h + * + * CIMax(R) SP2 driver in conjunction with NetUp Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef CIMAX2_H +#define CIMAX2_H +#include "dvb_ca_en50221.h" + +extern int netup_ci_read_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr); +extern int netup_ci_write_attribute_mem(struct dvb_ca_en50221 *en50221, + int slot, int addr, u8 data); +extern int netup_ci_read_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr); +extern int netup_ci_write_cam_ctl(struct dvb_ca_en50221 *en50221, + int slot, u8 addr, u8 data); +extern int netup_ci_slot_reset(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_shutdown(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_ts_ctl(struct dvb_ca_en50221 *en50221, int slot); +extern int netup_ci_slot_status(struct cx23885_dev *dev, u32 pci_status); +extern int netup_poll_ci_slot_status(struct dvb_ca_en50221 *en50221, + int slot, int open); +extern int netup_ci_init(struct cx23885_tsport *port); +extern void netup_ci_exit(struct cx23885_tsport *port); + +#endif diff --git a/drivers/media/pci/cx23885/cx23885-417.c b/drivers/media/pci/cx23885/cx23885-417.c new file mode 100644 index 00000000000..5d5052d0253 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-417.c @@ -0,0 +1,1790 @@ +/* + * + * Support for a cx23417 mpeg encoder via cx23885 host port. + * + * (c) 2004 Jelle Foks <jelle@foks.us> + * (c) 2004 Gerd Knorr <kraxel@bytesex.org> + * (c) 2008 Steven Toth <stoth@linuxtv.org> + * - CX23885/7/8 support + * + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/slab.h> +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/cx2341x.h> + +#include "cx23885.h" +#include "cx23885-ioctl.h" + +#define CX23885_FIRM_IMAGE_SIZE 376836 +#define CX23885_FIRM_IMAGE_NAME "v4l-cx23885-enc.fw" + +static unsigned int mpegbufs = 32; +module_param(mpegbufs, int, 0644); +MODULE_PARM_DESC(mpegbufs, "number of mpeg buffers, range 2-32"); +static unsigned int mpeglines = 32; +module_param(mpeglines, int, 0644); +MODULE_PARM_DESC(mpeglines, "number of lines in an MPEG buffer, range 2-32"); +static unsigned int mpeglinesize = 512; +module_param(mpeglinesize, int, 0644); +MODULE_PARM_DESC(mpeglinesize, + "number of bytes in each line of an MPEG buffer, range 512-1024"); + +static unsigned int v4l_debug; +module_param(v4l_debug, int, 0644); +MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages"); + +#define dprintk(level, fmt, arg...)\ + do { if (v4l_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, \ + (dev) ? dev->name : "cx23885[?]", ## arg); \ + } while (0) + +static struct cx23885_tvnorm cx23885_tvnorms[] = { + { + .name = "NTSC-M", + .id = V4L2_STD_NTSC_M, + }, { + .name = "NTSC-JP", + .id = V4L2_STD_NTSC_M_JP, + }, { + .name = "PAL-BG", + .id = V4L2_STD_PAL_BG, + }, { + .name = "PAL-DK", + .id = V4L2_STD_PAL_DK, + }, { + .name = "PAL-I", + .id = V4L2_STD_PAL_I, + }, { + .name = "PAL-M", + .id = V4L2_STD_PAL_M, + }, { + .name = "PAL-N", + .id = V4L2_STD_PAL_N, + }, { + .name = "PAL-Nc", + .id = V4L2_STD_PAL_Nc, + }, { + .name = "PAL-60", + .id = V4L2_STD_PAL_60, + }, { + .name = "SECAM-L", + .id = V4L2_STD_SECAM_L, + }, { + .name = "SECAM-DK", + .id = V4L2_STD_SECAM_DK, + } +}; + +/* ------------------------------------------------------------------ */ +enum cx23885_capture_type { + CX23885_MPEG_CAPTURE, + CX23885_RAW_CAPTURE, + CX23885_RAW_PASSTHRU_CAPTURE +}; +enum cx23885_capture_bits { + CX23885_RAW_BITS_NONE = 0x00, + CX23885_RAW_BITS_YUV_CAPTURE = 0x01, + CX23885_RAW_BITS_PCM_CAPTURE = 0x02, + CX23885_RAW_BITS_VBI_CAPTURE = 0x04, + CX23885_RAW_BITS_PASSTHRU_CAPTURE = 0x08, + CX23885_RAW_BITS_TO_HOST_CAPTURE = 0x10 +}; +enum cx23885_capture_end { + CX23885_END_AT_GOP, /* stop at the end of gop, generate irq */ + CX23885_END_NOW, /* stop immediately, no irq */ +}; +enum cx23885_framerate { + CX23885_FRAMERATE_NTSC_30, /* NTSC: 30fps */ + CX23885_FRAMERATE_PAL_25 /* PAL: 25fps */ +}; +enum cx23885_stream_port { + CX23885_OUTPUT_PORT_MEMORY, + CX23885_OUTPUT_PORT_STREAMING, + CX23885_OUTPUT_PORT_SERIAL +}; +enum cx23885_data_xfer_status { + CX23885_MORE_BUFFERS_FOLLOW, + CX23885_LAST_BUFFER, +}; +enum cx23885_picture_mask { + CX23885_PICTURE_MASK_NONE, + CX23885_PICTURE_MASK_I_FRAMES, + CX23885_PICTURE_MASK_I_P_FRAMES = 0x3, + CX23885_PICTURE_MASK_ALL_FRAMES = 0x7, +}; +enum cx23885_vbi_mode_bits { + CX23885_VBI_BITS_SLICED, + CX23885_VBI_BITS_RAW, +}; +enum cx23885_vbi_insertion_bits { + CX23885_VBI_BITS_INSERT_IN_XTENSION_USR_DATA, + CX23885_VBI_BITS_INSERT_IN_PRIVATE_PACKETS = 0x1 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM = 0x2 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_USR_DATA = 0x4 << 1, + CX23885_VBI_BITS_SEPARATE_STREAM_PRV_DATA = 0x5 << 1, +}; +enum cx23885_dma_unit { + CX23885_DMA_BYTES, + CX23885_DMA_FRAMES, +}; +enum cx23885_dma_transfer_status_bits { + CX23885_DMA_TRANSFER_BITS_DONE = 0x01, + CX23885_DMA_TRANSFER_BITS_ERROR = 0x04, + CX23885_DMA_TRANSFER_BITS_LL_ERROR = 0x10, +}; +enum cx23885_pause { + CX23885_PAUSE_ENCODING, + CX23885_RESUME_ENCODING, +}; +enum cx23885_copyright { + CX23885_COPYRIGHT_OFF, + CX23885_COPYRIGHT_ON, +}; +enum cx23885_notification_type { + CX23885_NOTIFICATION_REFRESH, +}; +enum cx23885_notification_status { + CX23885_NOTIFICATION_OFF, + CX23885_NOTIFICATION_ON, +}; +enum cx23885_notification_mailbox { + CX23885_NOTIFICATION_NO_MAILBOX = -1, +}; +enum cx23885_field1_lines { + CX23885_FIELD1_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD1_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD1_MICRONAS = 0x0105, /* 261 */ +}; +enum cx23885_field2_lines { + CX23885_FIELD2_SAA7114 = 0x00EF, /* 239 */ + CX23885_FIELD2_SAA7115 = 0x00F0, /* 240 */ + CX23885_FIELD2_MICRONAS = 0x0106, /* 262 */ +}; +enum cx23885_custom_data_type { + CX23885_CUSTOM_EXTENSION_USR_DATA, + CX23885_CUSTOM_PRIVATE_PACKET, +}; +enum cx23885_mute { + CX23885_UNMUTE, + CX23885_MUTE, +}; +enum cx23885_mute_video_mask { + CX23885_MUTE_VIDEO_V_MASK = 0x0000FF00, + CX23885_MUTE_VIDEO_U_MASK = 0x00FF0000, + CX23885_MUTE_VIDEO_Y_MASK = 0xFF000000, +}; +enum cx23885_mute_video_shift { + CX23885_MUTE_VIDEO_V_SHIFT = 8, + CX23885_MUTE_VIDEO_U_SHIFT = 16, + CX23885_MUTE_VIDEO_Y_SHIFT = 24, +}; + +/* defines below are from ivtv-driver.h */ +#define IVTV_CMD_HW_BLOCKS_RST 0xFFFFFFFF + +/* Firmware API commands */ +#define IVTV_API_STD_TIMEOUT 500 + +/* Registers */ +/* IVTV_REG_OFFSET */ +#define IVTV_REG_ENC_SDRAM_REFRESH (0x07F8) +#define IVTV_REG_ENC_SDRAM_PRECHARGE (0x07FC) +#define IVTV_REG_SPU (0x9050) +#define IVTV_REG_HW_BLOCKS (0x9054) +#define IVTV_REG_VPU (0x9058) +#define IVTV_REG_APU (0xA064) + +/**** Bit definitions for MC417_RWD and MC417_OEN registers *** + bits 31-16 ++-----------+ +| Reserved | ++-----------+ + bit 15 bit 14 bit 13 bit 12 bit 11 bit 10 bit 9 bit 8 ++-------+-------+-------+-------+-------+-------+-------+-------+ +| MIWR# | MIRD# | MICS# |MIRDY# |MIADDR3|MIADDR2|MIADDR1|MIADDR0| ++-------+-------+-------+-------+-------+-------+-------+-------+ + bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0 ++-------+-------+-------+-------+-------+-------+-------+-------+ +|MIDATA7|MIDATA6|MIDATA5|MIDATA4|MIDATA3|MIDATA2|MIDATA1|MIDATA0| ++-------+-------+-------+-------+-------+-------+-------+-------+ +***/ +#define MC417_MIWR 0x8000 +#define MC417_MIRD 0x4000 +#define MC417_MICS 0x2000 +#define MC417_MIRDY 0x1000 +#define MC417_MIADDR 0x0F00 +#define MC417_MIDATA 0x00FF + +/* MIADDR* nibble definitions */ +#define MCI_MEMORY_DATA_BYTE0 0x000 +#define MCI_MEMORY_DATA_BYTE1 0x100 +#define MCI_MEMORY_DATA_BYTE2 0x200 +#define MCI_MEMORY_DATA_BYTE3 0x300 +#define MCI_MEMORY_ADDRESS_BYTE2 0x400 +#define MCI_MEMORY_ADDRESS_BYTE1 0x500 +#define MCI_MEMORY_ADDRESS_BYTE0 0x600 +#define MCI_REGISTER_DATA_BYTE0 0x800 +#define MCI_REGISTER_DATA_BYTE1 0x900 +#define MCI_REGISTER_DATA_BYTE2 0xA00 +#define MCI_REGISTER_DATA_BYTE3 0xB00 +#define MCI_REGISTER_ADDRESS_BYTE0 0xC00 +#define MCI_REGISTER_ADDRESS_BYTE1 0xD00 +#define MCI_REGISTER_MODE 0xE00 + +/* Read and write modes */ +#define MCI_MODE_REGISTER_READ 0 +#define MCI_MODE_REGISTER_WRITE 1 +#define MCI_MODE_MEMORY_READ 0 +#define MCI_MODE_MEMORY_WRITE 0x40 + +/*** Bit definitions for MC417_CTL register **** + bits 31-6 bits 5-4 bit 3 bits 2-1 Bit 0 ++--------+-------------+--------+--------------+------------+ +|Reserved|MC417_SPD_CTL|Reserved|MC417_GPIO_SEL|UART_GPIO_EN| ++--------+-------------+--------+--------------+------------+ +***/ +#define MC417_SPD_CTL(x) (((x) << 4) & 0x00000030) +#define MC417_GPIO_SEL(x) (((x) << 1) & 0x00000006) +#define MC417_UART_GPIO_EN 0x00000001 + +/* Values for speed control */ +#define MC417_SPD_CTL_SLOW 0x1 +#define MC417_SPD_CTL_MEDIUM 0x0 +#define MC417_SPD_CTL_FAST 0x3 /* b'1x, but we use b'11 */ + +/* Values for GPIO select */ +#define MC417_GPIO_SEL_GPIO3 0x3 +#define MC417_GPIO_SEL_GPIO2 0x2 +#define MC417_GPIO_SEL_GPIO1 0x1 +#define MC417_GPIO_SEL_GPIO0 0x0 + +void cx23885_mc417_init(struct cx23885_dev *dev) +{ + u32 regval; + + dprintk(2, "%s()\n", __func__); + + /* Configure MC417_CTL register to defaults. */ + regval = MC417_SPD_CTL(MC417_SPD_CTL_FAST) | + MC417_GPIO_SEL(MC417_GPIO_SEL_GPIO3) | + MC417_UART_GPIO_EN; + cx_write(MC417_CTL, regval); + + /* Configure MC417_OEN to defaults. */ + regval = MC417_MIRDY; + cx_write(MC417_OEN, regval); + + /* Configure MC417_RWD to defaults. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS; + cx_write(MC417_RWD, regval); +} + +static int mc417_wait_ready(struct cx23885_dev *dev) +{ + u32 mi_ready; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + + for (;;) { + mi_ready = cx_read(MC417_RWD) & MC417_MIRDY; + if (mi_ready != 0) + return 0; + if (time_after(jiffies, timeout)) + return -1; + udelay(1); + } +} + +int mc417_register_write(struct cx23885_dev *dev, u16 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a write. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_WRITE; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +int mc417_register_read(struct cx23885_dev *dev, u16 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE0 | + ((address & 0x00FF)); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Indicate that this is a register read. */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_MODE | + MCI_MODE_REGISTER_READ; + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. + * Transtion 0x5000 -> 0x9000 correct (RD/RDY -> WR/RDY)? + * Should it be 0x9000 -> 0xF000 (also why is RDY being set, its + * input only...) + */ + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE0; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = tempval & 0x000000FF; + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_REGISTER_DATA_BYTE3; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 24); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value) +{ + u32 regval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0 | + (value & 0x000000FF); + cx_write(MC417_RWD, regval); + + /* Transition CS/WR to effect write transaction across bus. */ + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1 | + ((value >> 8) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2 | + ((value >> 16) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3 | + ((value >> 24) & 0x000000FF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_WRITE | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + return mc417_wait_ready(dev); +} + +int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value) +{ + int retval; + u32 regval; + u32 tempval; + u32 dataval; + + /* Enable MC417 GPIO outputs except for MC417_MIRDY, + * which is an input. + */ + cx_write(MC417_OEN, MC417_MIRDY); + + /* Write address byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE2 | + MCI_MODE_MEMORY_READ | ((address >> 16) & 0x3F); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE1 | + ((address >> 8) & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Write address byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_ADDRESS_BYTE0 | + (address & 0xFF); + cx_write(MC417_RWD, regval); + regval |= MC417_MICS | MC417_MIWR; + cx_write(MC417_RWD, regval); + + /* Wait for the trans to complete (MC417_MIRDY asserted). */ + retval = mc417_wait_ready(dev); + + /* switch the DAT0-7 GPIO[10:3] to input mode */ + cx_write(MC417_OEN, MC417_MIRDY | MC417_MIDATA); + + /* Read data byte 3 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Transition RD to effect read transaction across bus. */ + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE3; + cx_write(MC417_RWD, regval); + + /* Collect byte */ + tempval = cx_read(MC417_RWD); + dataval = ((tempval & 0x000000FF) << 24); + + /* Bring CS and RD high. */ + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 2 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE2; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 16); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 1 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE1; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= ((tempval & 0x000000FF) << 8); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + /* Read data byte 0 */ + regval = MC417_MIRD | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + regval = MC417_MIWR | MC417_MIRDY | MCI_MEMORY_DATA_BYTE0; + cx_write(MC417_RWD, regval); + tempval = cx_read(MC417_RWD); + dataval |= (tempval & 0x000000FF); + regval = MC417_MIWR | MC417_MIRD | MC417_MICS | MC417_MIRDY; + cx_write(MC417_RWD, regval); + + *value = dataval; + + return retval; +} + +void mc417_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Set the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val |= (mask & 0x000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + u32 val; + + /* Clear the gpio value */ + mc417_register_read(dev, 0x900C, &val); + val &= ~(mask & 0x0000ffff); + mc417_register_write(dev, 0x900C, val); +} + +void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + u32 val; + + /* Enable GPIO direction bits */ + mc417_register_read(dev, 0x9020, &val); + if (asoutput) + val |= (mask & 0x0000ffff); + else + val &= ~(mask & 0x0000ffff); + + mc417_register_write(dev, 0x9020, val); +} +/* ------------------------------------------------------------------ */ + +/* MPEG encoder API */ +static char *cmd_to_str(int cmd) +{ + switch (cmd) { + case CX2341X_ENC_PING_FW: + return "PING_FW"; + case CX2341X_ENC_START_CAPTURE: + return "START_CAPTURE"; + case CX2341X_ENC_STOP_CAPTURE: + return "STOP_CAPTURE"; + case CX2341X_ENC_SET_AUDIO_ID: + return "SET_AUDIO_ID"; + case CX2341X_ENC_SET_VIDEO_ID: + return "SET_VIDEO_ID"; + case CX2341X_ENC_SET_PCR_ID: + return "SET_PCR_ID"; + case CX2341X_ENC_SET_FRAME_RATE: + return "SET_FRAME_RATE"; + case CX2341X_ENC_SET_FRAME_SIZE: + return "SET_FRAME_SIZE"; + case CX2341X_ENC_SET_BIT_RATE: + return "SET_BIT_RATE"; + case CX2341X_ENC_SET_GOP_PROPERTIES: + return "SET_GOP_PROPERTIES"; + case CX2341X_ENC_SET_ASPECT_RATIO: + return "SET_ASPECT_RATIO"; + case CX2341X_ENC_SET_DNR_FILTER_MODE: + return "SET_DNR_FILTER_MODE"; + case CX2341X_ENC_SET_DNR_FILTER_PROPS: + return "SET_DNR_FILTER_PROPS"; + case CX2341X_ENC_SET_CORING_LEVELS: + return "SET_CORING_LEVELS"; + case CX2341X_ENC_SET_SPATIAL_FILTER_TYPE: + return "SET_SPATIAL_FILTER_TYPE"; + case CX2341X_ENC_SET_VBI_LINE: + return "SET_VBI_LINE"; + case CX2341X_ENC_SET_STREAM_TYPE: + return "SET_STREAM_TYPE"; + case CX2341X_ENC_SET_OUTPUT_PORT: + return "SET_OUTPUT_PORT"; + case CX2341X_ENC_SET_AUDIO_PROPERTIES: + return "SET_AUDIO_PROPERTIES"; + case CX2341X_ENC_HALT_FW: + return "HALT_FW"; + case CX2341X_ENC_GET_VERSION: + return "GET_VERSION"; + case CX2341X_ENC_SET_GOP_CLOSURE: + return "SET_GOP_CLOSURE"; + case CX2341X_ENC_GET_SEQ_END: + return "GET_SEQ_END"; + case CX2341X_ENC_SET_PGM_INDEX_INFO: + return "SET_PGM_INDEX_INFO"; + case CX2341X_ENC_SET_VBI_CONFIG: + return "SET_VBI_CONFIG"; + case CX2341X_ENC_SET_DMA_BLOCK_SIZE: + return "SET_DMA_BLOCK_SIZE"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_10: + return "GET_PREV_DMA_INFO_MB_10"; + case CX2341X_ENC_GET_PREV_DMA_INFO_MB_9: + return "GET_PREV_DMA_INFO_MB_9"; + case CX2341X_ENC_SCHED_DMA_TO_HOST: + return "SCHED_DMA_TO_HOST"; + case CX2341X_ENC_INITIALIZE_INPUT: + return "INITIALIZE_INPUT"; + case CX2341X_ENC_SET_FRAME_DROP_RATE: + return "SET_FRAME_DROP_RATE"; + case CX2341X_ENC_PAUSE_ENCODER: + return "PAUSE_ENCODER"; + case CX2341X_ENC_REFRESH_INPUT: + return "REFRESH_INPUT"; + case CX2341X_ENC_SET_COPYRIGHT: + return "SET_COPYRIGHT"; + case CX2341X_ENC_SET_EVENT_NOTIFICATION: + return "SET_EVENT_NOTIFICATION"; + case CX2341X_ENC_SET_NUM_VSYNC_LINES: + return "SET_NUM_VSYNC_LINES"; + case CX2341X_ENC_SET_PLACEHOLDER: + return "SET_PLACEHOLDER"; + case CX2341X_ENC_MUTE_VIDEO: + return "MUTE_VIDEO"; + case CX2341X_ENC_MUTE_AUDIO: + return "MUTE_AUDIO"; + case CX2341X_ENC_MISC: + return "MISC"; + default: + return "UNKNOWN"; + } +} + +static int cx23885_mbox_func(void *priv, + u32 command, + int in, + int out, + u32 data[CX2341X_MBOX_MAX_DATA]) +{ + struct cx23885_dev *dev = priv; + unsigned long timeout; + u32 value, flag, retval = 0; + int i; + + dprintk(3, "%s: command(0x%X) = %s\n", __func__, command, + cmd_to_str(command)); + + /* this may not be 100% safe if we can't read any memory location + without side effects */ + mc417_memory_read(dev, dev->cx23417_mailbox - 4, &value); + if (value != 0x12345678) { + printk(KERN_ERR + "Firmware and/or mailbox pointer not initialized " + "or corrupted, signature = 0x%x, cmd = %s\n", value, + cmd_to_str(command)); + return -1; + } + + /* This read looks at 32 bits, but flag is only 8 bits. + * Seems we also bail if CMD or TIMEOUT bytes are set??? + */ + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (flag) { + printk(KERN_ERR "ERROR: Mailbox appears to be in use " + "(%x), cmd = %s\n", flag, cmd_to_str(command)); + return -1; + } + + flag |= 1; /* tell 'em we're working on it */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* write command + args + fill remaining with zeros */ + /* command code */ + mc417_memory_write(dev, dev->cx23417_mailbox + 1, command); + mc417_memory_write(dev, dev->cx23417_mailbox + 3, + IVTV_API_STD_TIMEOUT); /* timeout */ + for (i = 0; i < in; i++) { + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, data[i]); + dprintk(3, "API Input %d = %d\n", i, data[i]); + } + for (; i < CX2341X_MBOX_MAX_DATA; i++) + mc417_memory_write(dev, dev->cx23417_mailbox + 4 + i, 0); + + flag |= 3; /* tell 'em we're done writing */ + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + /* wait for firmware to handle the API command */ + timeout = jiffies + msecs_to_jiffies(10); + for (;;) { + mc417_memory_read(dev, dev->cx23417_mailbox, &flag); + if (0 != (flag & 4)) + break; + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "ERROR: API Mailbox timeout\n"); + return -1; + } + udelay(10); + } + + /* read output values */ + for (i = 0; i < out; i++) { + mc417_memory_read(dev, dev->cx23417_mailbox + 4 + i, data + i); + dprintk(3, "API Output %d = %d\n", i, data[i]); + } + + mc417_memory_read(dev, dev->cx23417_mailbox + 2, &retval); + dprintk(3, "API result = %d\n", retval); + + flag = 0; + mc417_memory_write(dev, dev->cx23417_mailbox, flag); + + return retval; +} + +/* We don't need to call the API often, so using just one + * mailbox will probably suffice + */ +static int cx23885_api_cmd(struct cx23885_dev *dev, + u32 command, + u32 inputcnt, + u32 outputcnt, + ...) +{ + u32 data[CX2341X_MBOX_MAX_DATA]; + va_list vargs; + int i, err; + + dprintk(3, "%s() cmds = 0x%08x\n", __func__, command); + + va_start(vargs, outputcnt); + for (i = 0; i < inputcnt; i++) + data[i] = va_arg(vargs, int); + + err = cx23885_mbox_func(dev, command, inputcnt, outputcnt, data); + for (i = 0; i < outputcnt; i++) { + int *vptr = va_arg(vargs, int *); + *vptr = data[i]; + } + va_end(vargs); + + return err; +} + +static int cx23885_find_mailbox(struct cx23885_dev *dev) +{ + u32 signature[4] = { + 0x12345678, 0x34567812, 0x56781234, 0x78123456 + }; + int signaturecnt = 0; + u32 value; + int i; + + dprintk(2, "%s()\n", __func__); + + for (i = 0; i < CX23885_FIRM_IMAGE_SIZE; i++) { + mc417_memory_read(dev, i, &value); + if (value == signature[signaturecnt]) + signaturecnt++; + else + signaturecnt = 0; + if (4 == signaturecnt) { + dprintk(1, "Mailbox signature found at 0x%x\n", i+1); + return i+1; + } + } + printk(KERN_ERR "Mailbox signature values not found!\n"); + return -1; +} + +static int cx23885_load_firmware(struct cx23885_dev *dev) +{ + static const unsigned char magic[8] = { + 0xa7, 0x0d, 0x00, 0x00, 0x66, 0xbb, 0x55, 0xaa + }; + const struct firmware *firmware; + int i, retval = 0; + u32 value = 0; + u32 gpio_output = 0; + u32 gpio_value; + u32 checksum = 0; + u32 *dataptr; + + dprintk(2, "%s()\n", __func__); + + /* Save GPIO settings before reset of APU */ + retval |= mc417_memory_read(dev, 0x9020, &gpio_output); + retval |= mc417_memory_read(dev, 0x900C, &gpio_value); + + retval = mc417_register_write(dev, + IVTV_REG_VPU, 0xFFFFFFED); + retval |= mc417_register_write(dev, + IVTV_REG_HW_BLOCKS, IVTV_CMD_HW_BLOCKS_RST); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_REFRESH, 0x80000800); + retval |= mc417_register_write(dev, + IVTV_REG_ENC_SDRAM_PRECHARGE, 0x1A); + retval |= mc417_register_write(dev, + IVTV_REG_APU, 0); + + if (retval != 0) { + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return -1; + } + + retval = request_firmware(&firmware, CX23885_FIRM_IMAGE_NAME, + &dev->pci->dev); + + if (retval != 0) { + printk(KERN_ERR + "ERROR: Hotplug firmware request failed (%s).\n", + CX23885_FIRM_IMAGE_NAME); + printk(KERN_ERR "Please fix your hotplug setup, the board will " + "not work without firmware loaded!\n"); + return -1; + } + + if (firmware->size != CX23885_FIRM_IMAGE_SIZE) { + printk(KERN_ERR "ERROR: Firmware size mismatch " + "(have %zd, expected %d)\n", + firmware->size, CX23885_FIRM_IMAGE_SIZE); + release_firmware(firmware); + return -1; + } + + if (0 != memcmp(firmware->data, magic, 8)) { + printk(KERN_ERR + "ERROR: Firmware magic mismatch, wrong file?\n"); + release_firmware(firmware); + return -1; + } + + /* transfer to the chip */ + dprintk(2, "Loading firmware ...\n"); + dataptr = (u32 *)firmware->data; + for (i = 0; i < (firmware->size >> 2); i++) { + value = *dataptr; + checksum += ~value; + if (mc417_memory_write(dev, i, value) != 0) { + printk(KERN_ERR "ERROR: Loading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + dataptr++; + } + + /* read back to verify with the checksum */ + dprintk(1, "Verifying firmware ...\n"); + for (i--; i >= 0; i--) { + if (mc417_memory_read(dev, i, &value) != 0) { + printk(KERN_ERR "ERROR: Reading firmware failed!\n"); + release_firmware(firmware); + return -1; + } + checksum -= ~value; + } + if (checksum) { + printk(KERN_ERR + "ERROR: Firmware load failed (checksum mismatch).\n"); + release_firmware(firmware); + return -1; + } + release_firmware(firmware); + dprintk(1, "Firmware upload successful.\n"); + + retval |= mc417_register_write(dev, IVTV_REG_HW_BLOCKS, + IVTV_CMD_HW_BLOCKS_RST); + + /* F/W power up disturbs the GPIOs, restore state */ + retval |= mc417_register_write(dev, 0x9020, gpio_output); + retval |= mc417_register_write(dev, 0x900C, gpio_value); + + retval |= mc417_register_read(dev, IVTV_REG_VPU, &value); + retval |= mc417_register_write(dev, IVTV_REG_VPU, value & 0xFFFFFFE8); + + /* Hardcoded GPIO's here */ + retval |= mc417_register_write(dev, 0x9020, 0x4000); + retval |= mc417_register_write(dev, 0x900C, 0x4000); + + mc417_register_read(dev, 0x9020, &gpio_output); + mc417_register_read(dev, 0x900C, &gpio_value); + + if (retval < 0) + printk(KERN_ERR "%s: Error with mc417_register_write\n", + __func__); + return 0; +} + +void cx23885_417_check_encoder(struct cx23885_dev *dev) +{ + u32 status, seq; + + status = seq = 0; + cx23885_api_cmd(dev, CX2341X_ENC_GET_SEQ_END, 0, 2, &status, &seq); + dprintk(1, "%s() status = %d, seq = %d\n", __func__, status, seq); +} + +static void cx23885_codec_settings(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + /* Dynamically change the height based on video standard */ + if (dev->encodernorm.id & V4L2_STD_525_60) + dev->ts1.height = 480; + else + dev->ts1.height = 576; + + /* assign frame size */ + cx23885_api_cmd(dev, CX2341X_ENC_SET_FRAME_SIZE, 2, 0, + dev->ts1.height, dev->ts1.width); + + dev->mpeg_params.width = dev->ts1.width; + dev->mpeg_params.height = dev->ts1.height; + dev->mpeg_params.is_50hz = + (dev->encodernorm.id & V4L2_STD_625_50) != 0; + + cx2341x_update(dev, cx23885_mbox_func, NULL, &dev->mpeg_params); + + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 3, 1); + cx23885_api_cmd(dev, CX2341X_ENC_MISC, 2, 0, 4, 1); +} + +static int cx23885_initialize_codec(struct cx23885_dev *dev, int startencoder) +{ + int version; + int retval; + u32 i, data[7]; + + dprintk(1, "%s()\n", __func__); + + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); /* ping */ + if (retval < 0) { + dprintk(2, "%s() PING OK\n", __func__); + retval = cx23885_load_firmware(dev); + if (retval < 0) { + printk(KERN_ERR "%s() f/w load failed\n", __func__); + return retval; + } + retval = cx23885_find_mailbox(dev); + if (retval < 0) { + printk(KERN_ERR "%s() mailbox < 0, error\n", + __func__); + return -1; + } + dev->cx23417_mailbox = retval; + retval = cx23885_api_cmd(dev, CX2341X_ENC_PING_FW, 0, 0); + if (retval < 0) { + printk(KERN_ERR + "ERROR: cx23417 firmware ping failed!\n"); + return -1; + } + retval = cx23885_api_cmd(dev, CX2341X_ENC_GET_VERSION, 0, 1, + &version); + if (retval < 0) { + printk(KERN_ERR "ERROR: cx23417 firmware get encoder :" + "version failed!\n"); + return -1; + } + dprintk(1, "cx23417 firmware version is 0x%08x\n", version); + msleep(200); + } + + cx23885_codec_settings(dev); + msleep(60); + + cx23885_api_cmd(dev, CX2341X_ENC_SET_NUM_VSYNC_LINES, 2, 0, + CX23885_FIELD1_SAA7115, CX23885_FIELD2_SAA7115); + cx23885_api_cmd(dev, CX2341X_ENC_SET_PLACEHOLDER, 12, 0, + CX23885_CUSTOM_EXTENSION_USR_DATA, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0); + + /* Setup to capture VBI */ + data[0] = 0x0001BD00; + data[1] = 1; /* frames per interrupt */ + data[2] = 4; /* total bufs */ + data[3] = 0x91559155; /* start codes */ + data[4] = 0x206080C0; /* stop codes */ + data[5] = 6; /* lines */ + data[6] = 64; /* BPL */ + + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_CONFIG, 7, 0, data[0], data[1], + data[2], data[3], data[4], data[5], data[6]); + + for (i = 2; i <= 24; i++) { + int valid; + + valid = ((i >= 19) && (i <= 21)); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, i, + valid, 0 , 0, 0); + cx23885_api_cmd(dev, CX2341X_ENC_SET_VBI_LINE, 5, 0, + i | 0x80000000, valid, 0, 0, 0); + } + + cx23885_api_cmd(dev, CX2341X_ENC_MUTE_AUDIO, 1, 0, CX23885_UNMUTE); + msleep(60); + + /* initialize the video input */ + cx23885_api_cmd(dev, CX2341X_ENC_INITIALIZE_INPUT, 0, 0); + msleep(60); + + /* Enable VIP style pixel invalidation so we work with scaled mode */ + mc417_memory_write(dev, 2120, 0x00000080); + + /* start capturing to the host interface */ + if (startencoder) { + cx23885_api_cmd(dev, CX2341X_ENC_START_CAPTURE, 2, 0, + CX23885_MPEG_CAPTURE, CX23885_RAW_BITS_NONE); + msleep(10); + } + + return 0; +} + +/* ------------------------------------------------------------------ */ + +static int bb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + fh->dev->ts1.ts_packet_size = mpeglinesize; + fh->dev->ts1.ts_packet_count = mpeglines; + + *size = fh->dev->ts1.ts_packet_size * fh->dev->ts1.ts_packet_count; + *count = mpegbufs; + + return 0; +} + +static int bb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + return cx23885_buf_prepare(q, &fh->dev->ts1, + (struct cx23885_buffer *)vb, + field); +} + +static void bb_buf_queue(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_fh *fh = q->priv_data; + cx23885_buf_queue(&fh->dev->ts1, (struct cx23885_buffer *)vb); +} + +static void bb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); +} + +static struct videobuf_queue_ops cx23885_qops = { + .buf_setup = bb_buf_setup, + .buf_prepare = bb_buf_prepare, + .buf_queue = bb_buf_queue, + .buf_release = bb_buf_release, +}; + +/* ------------------------------------------------------------------ */ + +static const u32 *ctrl_classes[] = { + cx2341x_mpeg_ctrls, + NULL +}; + +static int cx23885_queryctrl(struct cx23885_dev *dev, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (qctrl->id == 0) + return -EINVAL; + + /* MPEG V4L2 controls */ + if (cx2341x_ctrl_query(&dev->mpeg_params, qctrl)) + qctrl->flags |= V4L2_CTRL_FLAG_DISABLED; + + return 0; +} + +static int cx23885_querymenu(struct cx23885_dev *dev, + struct v4l2_querymenu *qmenu) +{ + struct v4l2_queryctrl qctrl; + + qctrl.id = qmenu->id; + cx23885_queryctrl(dev, &qctrl); + return v4l2_ctrl_query_menu(qmenu, &qctrl, + cx2341x_ctrl_get_menu(&dev->mpeg_params, qmenu->id)); +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + call_all(dev, core, g_std, id); + + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(cx23885_tvnorms); i++) + if (*id & cx23885_tvnorms[i].id) + break; + if (i == ARRAY_SIZE(cx23885_tvnorms)) + return -EINVAL; + dev->encodernorm = cx23885_tvnorms[i]; + + /* Have the drier core notify the subdevices */ + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, *id); + mutex_unlock(&dev->lock); + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + return cx23885_enum_input(dev, i); +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + return cx23885_get_input(file, priv, i); +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + return cx23885_set_input(file, priv, i); +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + strcpy(t->name, "Television"); + call_all(dev, tuner, g_tuner, t); + + dprintk(1, "VIDIOC_G_TUNER: tuner type %d\n", t->type); + + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + + /* Update the A/V core */ + call_all(dev, tuner, s_tuner, t); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + f->type = V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + call_all(dev, tuner, g_frequency, f); + + return 0; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + return cx23885_set_frequency(file, priv, f); +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_get_control(dev, ctl); +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_set_control(dev, ctl); +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_tsport *tsport = &dev->ts1; + + strlcpy(cap->driver, dev->name, sizeof(cap->driver)); + strlcpy(cap->card, cx23885_boards[tsport->dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + 0; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (f->index != 0) + return -EINVAL; + + strlcpy(f->description, "MPEG", sizeof(f->description)); + f->pixelformat = V4L2_PIX_FMT_MPEG; + + return 0; +} + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + f->fmt.pix.width = dev->ts1.width; + f->fmt.pix.height = dev->ts1.height; + f->fmt.pix.field = fh->mpegq.field; + dprintk(1, "VIDIOC_G_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_TRY_FMT: w: %d, h: %d, f: %d\n", + dev->ts1.width, dev->ts1.height, fh->mpegq.field); + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + f->fmt.pix.pixelformat = V4L2_PIX_FMT_MPEG; + f->fmt.pix.bytesperline = 0; + f->fmt.pix.sizeimage = + dev->ts1.ts_packet_size * dev->ts1.ts_packet_count; + f->fmt.pix.colorspace = 0; + dprintk(1, "VIDIOC_S_FMT: w: %d, h: %d, f: %d\n", + f->fmt.pix.width, f->fmt.pix.height, f->fmt.pix.field); + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_reqbufs(&fh->mpegq, p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_querybuf(&fh->mpegq, p); +} + +static int vidioc_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_qbuf(&fh->mpegq, p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) +{ + struct cx23885_fh *fh = priv; + + return videobuf_dqbuf(&fh->mpegq, b, file->f_flags & O_NONBLOCK); +} + + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_streamon(&fh->mpegq); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_streamoff(&fh->mpegq); +} + +static int vidioc_g_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + return cx2341x_ext_ctrls(&dev->mpeg_params, 0, f, VIDIOC_G_EXT_CTRLS); +} + +static int vidioc_s_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + struct cx2341x_mpeg_params p; + int err; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + p = dev->mpeg_params; + err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_S_EXT_CTRLS); + + if (err == 0) { + err = cx2341x_update(dev, cx23885_mbox_func, + &dev->mpeg_params, &p); + dev->mpeg_params = p; + } + return err; +} + +static int vidioc_try_ext_ctrls(struct file *file, void *priv, + struct v4l2_ext_controls *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + struct cx2341x_mpeg_params p; + int err; + + if (f->ctrl_class != V4L2_CTRL_CLASS_MPEG) + return -EINVAL; + + p = dev->mpeg_params; + err = cx2341x_ext_ctrls(&p, 0, f, VIDIOC_TRY_EXT_CTRLS); + return err; +} + +static int vidioc_log_status(struct file *file, void *priv) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + char name[32 + 2]; + + snprintf(name, sizeof(name), "%s/2", dev->name); + printk(KERN_INFO + "%s/2: ============ START LOG STATUS ============\n", + dev->name); + call_all(dev, core, log_status); + cx2341x_log_status(&dev->mpeg_params, name); + printk(KERN_INFO + "%s/2: ============= END LOG STATUS =============\n", + dev->name); + return 0; +} + +static int vidioc_querymenu(struct file *file, void *priv, + struct v4l2_querymenu *a) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + return cx23885_querymenu(dev, a); +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *c) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + return cx23885_queryctrl(dev, c); +} + +static int mpeg_open(struct file *file) +{ + struct cx23885_dev *dev = video_drvdata(file); + struct cx23885_fh *fh; + + dprintk(2, "%s()\n", __func__); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (!fh) + return -ENOMEM; + + file->private_data = fh; + fh->dev = dev; + + videobuf_queue_sg_init(&fh->mpegq, &cx23885_qops, + &dev->pci->dev, &dev->ts1.slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh, NULL); + return 0; +} + +static int mpeg_release(struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* FIXME: Review this crap */ + /* Shut device down on last close */ + if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { + if (atomic_dec_return(&dev->v4l_reader_count) == 0) { + /* stop mpeg capture */ + cx23885_api_cmd(fh->dev, CX2341X_ENC_STOP_CAPTURE, 3, 0, + CX23885_END_NOW, CX23885_MPEG_CAPTURE, + CX23885_RAW_BITS_NONE); + + msleep(500); + cx23885_417_check_encoder(dev); + + cx23885_cancel_buffers(&fh->dev->ts1); + } + } + + if (fh->mpegq.streaming) + videobuf_streamoff(&fh->mpegq); + if (fh->mpegq.reading) + videobuf_read_stop(&fh->mpegq); + + videobuf_mmap_free(&fh->mpegq); + file->private_data = NULL; + kfree(fh); + + return 0; +} + +static ssize_t mpeg_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + /* Deal w/ A/V decoder * and mpeg encoder sync issues. */ + /* Start mpeg encoder on first read. */ + if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { + if (atomic_inc_return(&dev->v4l_reader_count) == 1) { + if (cx23885_initialize_codec(dev, 1) < 0) + return -EINVAL; + } + } + + return videobuf_read_stream(&fh->mpegq, data, count, ppos, 0, + file->f_flags & O_NONBLOCK); +} + +static unsigned int mpeg_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s\n", __func__); + + return videobuf_poll_stream(file, &fh->mpegq, wait); +} + +static int mpeg_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + dprintk(2, "%s()\n", __func__); + + return videobuf_mmap_mapper(&fh->mpegq, vma); +} + +static struct v4l2_file_operations mpeg_fops = { + .owner = THIS_MODULE, + .open = mpeg_open, + .release = mpeg_release, + .read = mpeg_read, + .poll = mpeg_poll, + .mmap = mpeg_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops mpeg_ioctl_ops = { + .vidioc_querystd = vidioc_g_std, + .vidioc_g_std = vidioc_g_std, + .vidioc_s_std = vidioc_s_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_ext_ctrls = vidioc_g_ext_ctrls, + .vidioc_s_ext_ctrls = vidioc_s_ext_ctrls, + .vidioc_try_ext_ctrls = vidioc_try_ext_ctrls, + .vidioc_log_status = vidioc_log_status, + .vidioc_querymenu = vidioc_querymenu, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_chip_ident = cx23885_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = cx23885_g_register, + .vidioc_s_register = cx23885_s_register, +#endif +}; + +static struct video_device cx23885_mpeg_template = { + .name = "cx23885", + .fops = &mpeg_fops, + .ioctl_ops = &mpeg_ioctl_ops, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +void cx23885_417_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + if (dev->v4l_device) { + if (video_is_registered(dev->v4l_device)) + video_unregister_device(dev->v4l_device); + else + video_device_release(dev->v4l_device); + dev->v4l_device = NULL; + } +} + +static struct video_device *cx23885_video_dev_alloc( + struct cx23885_tsport *tsport, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + struct cx23885_dev *dev = tsport->dev; + + dprintk(1, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + snprintf(vfd->name, sizeof(vfd->name), "%s (%s)", + cx23885_boards[tsport->dev->board].name, type); + vfd->parent = &pci->dev; + vfd->release = video_device_release; + return vfd; +} + +int cx23885_417_register(struct cx23885_dev *dev) +{ + /* FIXME: Port1 hardcoded here */ + int err = -ENODEV; + struct cx23885_tsport *tsport = &dev->ts1; + + dprintk(1, "%s()\n", __func__); + + if (cx23885_boards[dev->board].portb != CX23885_MPEG_ENCODER) + return err; + + /* Set default TV standard */ + dev->encodernorm = cx23885_tvnorms[0]; + + if (dev->encodernorm.id & V4L2_STD_525_60) + tsport->height = 480; + else + tsport->height = 576; + + tsport->width = 720; + cx2341x_fill_defaults(&dev->mpeg_params); + + dev->mpeg_params.port = CX2341X_PORT_SERIAL; + + /* Allocate and initialize V4L video device */ + dev->v4l_device = cx23885_video_dev_alloc(tsport, + dev->pci, &cx23885_mpeg_template, "mpeg"); + video_set_drvdata(dev->v4l_device, dev); + err = video_register_device(dev->v4l_device, + VFL_TYPE_GRABBER, -1); + if (err < 0) { + printk(KERN_INFO "%s: can't register mpeg device\n", dev->name); + return err; + } + + printk(KERN_INFO "%s: registered device %s [mpeg]\n", + dev->name, video_device_node_name(dev->v4l_device)); + + /* ST: Configure the encoder paramaters, but don't begin + * encoding, this resolves an issue where the first time the + * encoder is started video can be choppy. + */ + cx23885_initialize_codec(dev, 0); + + return 0; +} + +MODULE_FIRMWARE(CX23885_FIRM_IMAGE_NAME); diff --git a/drivers/media/pci/cx23885/cx23885-alsa.c b/drivers/media/pci/cx23885/cx23885-alsa.c new file mode 100644 index 00000000000..795169237e7 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-alsa.c @@ -0,0 +1,535 @@ +/* + * + * Support for CX23885 analog audio capture + * + * (c) 2008 Mijhail Moreyra <mijhail.moreyra@gmail.com> + * Adapted from cx88-alsa.c + * (c) 2009 Steven Toth <stoth@kernellabs.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/vmalloc.h> +#include <linux/dma-mapping.h> +#include <linux/pci.h> + +#include <asm/delay.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/control.h> +#include <sound/initval.h> + +#include <sound/tlv.h> + + +#include "cx23885.h" +#include "cx23885-reg.h" + +#define AUDIO_SRAM_CHANNEL SRAM_CH07 + +#define dprintk(level, fmt, arg...) if (audio_debug >= level) \ + printk(KERN_INFO "%s: " fmt, chip->dev->name , ## arg) + +#define dprintk_core(level, fmt, arg...) if (audio_debug >= level) \ + printk(KERN_DEBUG "%s: " fmt, chip->dev->name , ## arg) + +/**************************************************************************** + Module global static vars + ****************************************************************************/ + +static unsigned int disable_analog_audio; +module_param(disable_analog_audio, int, 0644); +MODULE_PARM_DESC(disable_analog_audio, "disable analog audio ALSA driver"); + +static unsigned int audio_debug; +module_param(audio_debug, int, 0644); +MODULE_PARM_DESC(audio_debug, "enable debug messages [analog audio]"); + +/**************************************************************************** + Board specific funtions + ****************************************************************************/ + +/* Constants taken from cx88-reg.h */ +#define AUD_INT_DN_RISCI1 (1 << 0) +#define AUD_INT_UP_RISCI1 (1 << 1) +#define AUD_INT_RDS_DN_RISCI1 (1 << 2) +#define AUD_INT_DN_RISCI2 (1 << 4) /* yes, 3 is skipped */ +#define AUD_INT_UP_RISCI2 (1 << 5) +#define AUD_INT_RDS_DN_RISCI2 (1 << 6) +#define AUD_INT_DN_SYNC (1 << 12) +#define AUD_INT_UP_SYNC (1 << 13) +#define AUD_INT_RDS_DN_SYNC (1 << 14) +#define AUD_INT_OPC_ERR (1 << 16) +#define AUD_INT_BER_IRQ (1 << 20) +#define AUD_INT_MCHG_IRQ (1 << 21) +#define GP_COUNT_CONTROL_RESET 0x3 + +/* + * BOARD Specific: Sets audio DMA + */ + +static int cx23885_start_audio_dma(struct cx23885_audio_dev *chip) +{ + struct cx23885_audio_buffer *buf = chip->buf; + struct cx23885_dev *dev = chip->dev; + struct sram_channel *audio_ch = + &dev->sram_channels[AUDIO_SRAM_CHANNEL]; + + dprintk(1, "%s()\n", __func__); + + /* Make sure RISC/FIFO are off before changing FIFO/RISC settings */ + cx_clear(AUD_INT_DMA_CTL, 0x11); + + /* setup fifo + format - out channel */ + cx23885_sram_channel_setup(chip->dev, audio_ch, buf->bpl, + buf->risc.dma); + + /* sets bpl size */ + cx_write(AUD_INT_A_LNGTH, buf->bpl); + + /* This is required to get good audio (1 seems to be ok) */ + cx_write(AUD_INT_A_MODE, 1); + + /* reset counter */ + cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + atomic_set(&chip->count, 0); + + dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d " + "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start+12)>>1, + chip->num_periods, buf->bpl * chip->num_periods); + + /* Enables corresponding bits at AUD_INT_STAT */ + cx_write(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI1); + + /* Clean any pending interrupt bits already set */ + cx_write(AUDIO_INT_INT_STAT, ~0); + + /* enable audio irqs */ + cx_set(PCI_INT_MSK, chip->dev->pci_irqmask | PCI_MSK_AUD_INT); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); /* Enables Risc Processor */ + cx_set(AUD_INT_DMA_CTL, 0x11); /* audio downstream FIFO and + RISC enable */ + if (audio_debug) + cx23885_sram_channel_dump(chip->dev, audio_ch); + + return 0; +} + +/* + * BOARD Specific: Resets audio DMA + */ +static int cx23885_stop_audio_dma(struct cx23885_audio_dev *chip) +{ + struct cx23885_dev *dev = chip->dev; + dprintk(1, "Stopping audio DMA\n"); + + /* stop dma */ + cx_clear(AUD_INT_DMA_CTL, 0x11); + + /* disable irqs */ + cx_clear(PCI_INT_MSK, PCI_MSK_AUD_INT); + cx_clear(AUDIO_INT_INT_MSK, AUD_INT_OPC_ERR | AUD_INT_DN_SYNC | + AUD_INT_DN_RISCI1); + + if (audio_debug) + cx23885_sram_channel_dump(chip->dev, + &dev->sram_channels[AUDIO_SRAM_CHANNEL]); + + return 0; +} + +/* + * BOARD Specific: Handles audio IRQ + */ +int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask) +{ + struct cx23885_audio_dev *chip = dev->audio_dev; + + if (0 == (status & mask)) + return 0; + + cx_write(AUDIO_INT_INT_STAT, status); + + /* risc op code error */ + if (status & AUD_INT_OPC_ERR) { + printk(KERN_WARNING "%s/1: Audio risc op code error\n", + dev->name); + cx_clear(AUD_INT_DMA_CTL, 0x11); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[AUDIO_SRAM_CHANNEL]); + } + if (status & AUD_INT_DN_SYNC) { + dprintk(1, "Downstream sync error\n"); + cx_write(AUD_INT_A_GPCNT_CTL, GP_COUNT_CONTROL_RESET); + return 1; + } + /* risc1 downstream */ + if (status & AUD_INT_DN_RISCI1) { + atomic_set(&chip->count, cx_read(AUD_INT_A_GPCNT)); + snd_pcm_period_elapsed(chip->substream); + } + /* FIXME: Any other status should deserve a special handling? */ + + return 1; +} + +static int dsp_buffer_free(struct cx23885_audio_dev *chip) +{ + BUG_ON(!chip->dma_size); + + dprintk(2, "Freeing buffer\n"); + videobuf_dma_unmap(&chip->pci->dev, chip->dma_risc); + videobuf_dma_free(chip->dma_risc); + btcx_riscmem_free(chip->pci, &chip->buf->risc); + kfree(chip->buf); + + chip->dma_risc = NULL; + chip->dma_size = 0; + + return 0; +} + +/**************************************************************************** + ALSA PCM Interface + ****************************************************************************/ + +/* + * Digital hardware definition + */ +#define DEFAULT_FIFO_SIZE 4096 + +static struct snd_pcm_hardware snd_cx23885_digital_hw = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_MMAP_VALID, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + /* Analog audio output will be full of clicks and pops if there + are not exactly four lines in the SRAM FIFO buffer. */ + .period_bytes_min = DEFAULT_FIFO_SIZE/4, + .period_bytes_max = DEFAULT_FIFO_SIZE/4, + .periods_min = 1, + .periods_max = 1024, + .buffer_bytes_max = (1024*1024), +}; + +/* + * audio pcm capture open callback + */ +static int snd_cx23885_pcm_open(struct snd_pcm_substream *substream) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + int err; + + if (!chip) { + printk(KERN_ERR "BUG: cx23885 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + + err = snd_pcm_hw_constraint_pow2(runtime, 0, + SNDRV_PCM_HW_PARAM_PERIODS); + if (err < 0) + goto _error; + + chip->substream = substream; + + runtime->hw = snd_cx23885_digital_hw; + + if (chip->dev->sram_channels[AUDIO_SRAM_CHANNEL].fifo_size != + DEFAULT_FIFO_SIZE) { + unsigned int bpl = chip->dev-> + sram_channels[AUDIO_SRAM_CHANNEL].fifo_size / 4; + bpl &= ~7; /* must be multiple of 8 */ + runtime->hw.period_bytes_min = bpl; + runtime->hw.period_bytes_max = bpl; + } + + return 0; +_error: + dprintk(1, "Error opening PCM!\n"); + return err; +} + +/* + * audio close callback + */ +static int snd_cx23885_close(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * hw_params callback + */ +static int snd_cx23885_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *hw_params) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct videobuf_dmabuf *dma; + + struct cx23885_audio_buffer *buf; + int ret; + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + chip->period_size = params_period_bytes(hw_params); + chip->num_periods = params_periods(hw_params); + chip->dma_size = chip->period_size * params_periods(hw_params); + + BUG_ON(!chip->dma_size); + BUG_ON(chip->num_periods & (chip->num_periods-1)); + + buf = kzalloc(sizeof(*buf), GFP_KERNEL); + if (NULL == buf) + return -ENOMEM; + + buf->bpl = chip->period_size; + + dma = &buf->dma; + videobuf_dma_init(dma); + ret = videobuf_dma_init_kernel(dma, PCI_DMA_FROMDEVICE, + (PAGE_ALIGN(chip->dma_size) >> PAGE_SHIFT)); + if (ret < 0) + goto error; + + ret = videobuf_dma_map(&chip->pci->dev, dma); + if (ret < 0) + goto error; + + ret = cx23885_risc_databuffer(chip->pci, &buf->risc, dma->sglist, + chip->period_size, chip->num_periods, 1); + if (ret < 0) + goto error; + + /* Loop back to start of program */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP|RISC_IRQ1|RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + chip->buf = buf; + chip->dma_risc = dma; + + substream->runtime->dma_area = chip->dma_risc->vaddr; + substream->runtime->dma_bytes = chip->dma_size; + substream->runtime->dma_addr = 0; + + return 0; + +error: + kfree(buf); + return ret; +} + +/* + * hw free callback + */ +static int snd_cx23885_hw_free(struct snd_pcm_substream *substream) +{ + + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + + if (substream->runtime->dma_area) { + dsp_buffer_free(chip); + substream->runtime->dma_area = NULL; + } + + return 0; +} + +/* + * prepare callback + */ +static int snd_cx23885_prepare(struct snd_pcm_substream *substream) +{ + return 0; +} + +/* + * trigger callback + */ +static int snd_cx23885_card_trigger(struct snd_pcm_substream *substream, + int cmd) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + int err; + + /* Local interrupts are already disabled by ALSA */ + spin_lock(&chip->lock); + + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + err = cx23885_start_audio_dma(chip); + break; + case SNDRV_PCM_TRIGGER_STOP: + err = cx23885_stop_audio_dma(chip); + break; + default: + err = -EINVAL; + break; + } + + spin_unlock(&chip->lock); + + return err; +} + +/* + * pointer callback + */ +static snd_pcm_uframes_t snd_cx23885_pointer( + struct snd_pcm_substream *substream) +{ + struct cx23885_audio_dev *chip = snd_pcm_substream_chip(substream); + struct snd_pcm_runtime *runtime = substream->runtime; + u16 count; + + count = atomic_read(&chip->count); + + return runtime->period_size * (count & (runtime->periods-1)); +} + +/* + * page callback (needed for mmap) + */ +static struct page *snd_cx23885_page(struct snd_pcm_substream *substream, + unsigned long offset) +{ + void *pageptr = substream->runtime->dma_area + offset; + return vmalloc_to_page(pageptr); +} + +/* + * operators + */ +static struct snd_pcm_ops snd_cx23885_pcm_ops = { + .open = snd_cx23885_pcm_open, + .close = snd_cx23885_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = snd_cx23885_hw_params, + .hw_free = snd_cx23885_hw_free, + .prepare = snd_cx23885_prepare, + .trigger = snd_cx23885_card_trigger, + .pointer = snd_cx23885_pointer, + .page = snd_cx23885_page, +}; + +/* + * create a PCM device + */ +static int snd_cx23885_pcm(struct cx23885_audio_dev *chip, int device, + char *name) +{ + int err; + struct snd_pcm *pcm; + + err = snd_pcm_new(chip->card, name, device, 0, 1, &pcm); + if (err < 0) + return err; + pcm->private_data = chip; + strcpy(pcm->name, name); + snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, &snd_cx23885_pcm_ops); + + return 0; +} + +/**************************************************************************** + Basic Flow for Sound Devices + ****************************************************************************/ + +/* + * Alsa Constructor - Component probe + */ + +struct cx23885_audio_dev *cx23885_audio_register(struct cx23885_dev *dev) +{ + struct snd_card *card; + struct cx23885_audio_dev *chip; + int err; + + if (disable_analog_audio) + return NULL; + + if (dev->sram_channels[AUDIO_SRAM_CHANNEL].cmds_start == 0) { + printk(KERN_WARNING "%s(): Missing SRAM channel configuration " + "for analog TV Audio\n", __func__); + return NULL; + } + + err = snd_card_create(SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1, + THIS_MODULE, sizeof(struct cx23885_audio_dev), &card); + if (err < 0) + goto error; + + chip = (struct cx23885_audio_dev *) card->private_data; + chip->dev = dev; + chip->pci = dev->pci; + chip->card = card; + spin_lock_init(&chip->lock); + + snd_card_set_dev(card, &dev->pci->dev); + + err = snd_cx23885_pcm(chip, 0, "CX23885 Digital"); + if (err < 0) + goto error; + + strcpy(card->driver, "CX23885"); + sprintf(card->shortname, "Conexant CX23885"); + sprintf(card->longname, "%s at %s", card->shortname, dev->name); + + err = snd_card_register(card); + if (err < 0) + goto error; + + dprintk(0, "registered ALSA audio device\n"); + + return chip; + +error: + snd_card_free(card); + printk(KERN_ERR "%s(): Failed to register analog " + "audio adapter\n", __func__); + + return NULL; +} + +/* + * ALSA destructor + */ +void cx23885_audio_unregister(struct cx23885_dev *dev) +{ + struct cx23885_audio_dev *chip = dev->audio_dev; + + snd_card_free(chip->card); +} diff --git a/drivers/media/pci/cx23885/cx23885-av.c b/drivers/media/pci/cx23885/cx23885-av.c new file mode 100644 index 00000000000..134ebddd860 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-av.c @@ -0,0 +1,35 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * AV device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include "cx23885.h" + +void cx23885_av_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, cx25840_work); + bool handled; + + v4l2_subdev_call(dev->sd_cx25840, core, interrupt_service_routine, + PCI_MSK_AV_CORE, &handled); + cx23885_irq_enable(dev, PCI_MSK_AV_CORE); +} diff --git a/drivers/media/pci/cx23885/cx23885-av.h b/drivers/media/pci/cx23885/cx23885-av.h new file mode 100644 index 00000000000..d2915c3e53a --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-av.h @@ -0,0 +1,27 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * AV device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2010 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_AV_H_ +#define _CX23885_AV_H_ +void cx23885_av_work_handler(struct work_struct *work); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-cards.c b/drivers/media/pci/cx23885/cx23885-cards.c new file mode 100644 index 00000000000..d365e9a8efc --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-cards.c @@ -0,0 +1,1684 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <media/cx25840.h> +#include <linux/firmware.h> +#include <misc/altera.h> + +#include "cx23885.h" +#include "tuner-xc2028.h" +#include "netup-eeprom.h" +#include "netup-init.h" +#include "altera-ci.h" +#include "xc4000.h" +#include "xc5000.h" +#include "cx23888-ir.h" + +static unsigned int netup_card_rev = 1; +module_param(netup_card_rev, int, 0644); +MODULE_PARM_DESC(netup_card_rev, + "NetUP Dual DVB-T/C CI card revision"); +static unsigned int enable_885_ir; +module_param(enable_885_ir, int, 0644); +MODULE_PARM_DESC(enable_885_ir, + "Enable integrated IR controller for supported\n" + "\t\t CX2388[57] boards that are wired for it:\n" + "\t\t\tHVR-1250 (reported safe)\n" + "\t\t\tTerraTec Cinergy T PCIe Dual (not well tested, appears to be safe)\n" + "\t\t\tTeVii S470 (reported unsafe)\n" + "\t\t This can cause an interrupt storm with some cards.\n" + "\t\t Default: 0 [Disabled]"); + +/* ------------------------------------------------------------------ */ +/* board config info */ + +struct cx23885_board cx23885_boards[] = { + [CX23885_BOARD_UNKNOWN] = { + .name = "UNKNOWN/GENERIC", + /* Ensure safe default for unknown boards */ + .clk_freq = 0, + .input = {{ + .type = CX23885_VMUX_COMPOSITE1, + .vmux = 0, + }, { + .type = CX23885_VMUX_COMPOSITE2, + .vmux = 1, + }, { + .type = CX23885_VMUX_COMPOSITE3, + .vmux = 2, + }, { + .type = CX23885_VMUX_COMPOSITE4, + .vmux = 3, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1800lp] = { + .name = "Hauppauge WinTV-HVR1800lp", + .portc = CX23885_MPEG_DVB, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = 0, + .gpio0 = 0xff00, + }, { + .type = CX23885_VMUX_DEBUG, + .vmux = 0, + .gpio0 = 0xff01, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = 1, + .gpio0 = 0xff02, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = 2, + .gpio0 = 0xff02, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1800] = { + .name = "Hauppauge WinTV-HVR1800", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .amux = CX25840_AUDIO8, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1250] = { + .name = "Hauppauge WinTV-HVR1250", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, +#ifdef MT2131_NO_ANALOG_SUPPORT_YET + .tuner_type = TUNER_PHILIPS_TDA8290, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .tuner_bus = 1, +#endif + .force_bff = 1, + .input = {{ +#ifdef MT2131_NO_ANALOG_SUPPORT_YET + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .amux = CX25840_AUDIO8, + .gpio0 = 0xff00, + }, { +#endif + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + .gpio0 = 0xff02, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + .gpio0 = 0xff02, + } }, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP] = { + .name = "DViCO FusionHDTV5 Express", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1500Q] = { + .name = "Hauppauge WinTV-HVR1500Q", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1500] = { + .name = "Hauppauge WinTV-HVR1500", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, /* 0xc2 >> 1 */ + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1200] = { + .name = "Hauppauge WinTV-HVR1200", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1700] = { + .name = "Hauppauge WinTV-HVR1700", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1400] = { + .name = "Hauppauge WinTV-HVR1400", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = { + .name = "DViCO FusionHDTV7 Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP] = { + .name = "DViCO FusionHDTV DVB-T Dual Express", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H] = { + .name = "Leadtek Winfast PxDVR3200 H", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000] = { + .name = "Leadtek Winfast PxDVR3200 H XC4000", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_XC4000, + .tuner_addr = 0x61, + .radio_type = UNSET, + .radio_addr = ADDR_UNSET, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + } }, + }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E650F] = { + .name = "Compro VideoMate E650F", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TBS_6920] = { + .name = "TurboSight TBS 6920", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TEVII_S470] = { + .name = "TeVii S470", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_DVBWORLD_2005] = { + .name = "DVBWorld DVB-S2 2005", + .portb = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_NETUP_DUAL_DVBS2_CI] = { + .ci_type = 1, + .name = "NetUP Dual DVB-S2 CI", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1270] = { + .name = "Hauppauge WinTV-HVR1270", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1275] = { + .name = "Hauppauge WinTV-HVR1275", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1255] = { + .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1255_22111] = { + .name = "Hauppauge WinTV-HVR1255", + .porta = CX23885_ANALOG_VIDEO, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1210] = { + .name = "Hauppauge WinTV-HVR1210", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_MYGICA_X8506] = { + .name = "Mygica X8506 DMB-TH", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + }, + }, + }, + [CX23885_BOARD_MAGICPRO_PROHDTVE2] = { + .name = "Magic-Pro ProHDTV Extreme 2", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + }, + }, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1850] = { + .name = "Hauppauge WinTV-HVR1850", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_ENCODER, + .portc = CX23885_MPEG_DVB, + .tuner_type = TUNER_ABSENT, + .tuner_addr = 0x42, /* 0x84 >> 1 */ + .force_bff = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN5_CH2 | + CX25840_VIN2_CH1 | + CX25840_DIF_ON, + .amux = CX25840_AUDIO8, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN6_CH1, + .amux = CX25840_AUDIO7, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_VIN7_CH3 | + CX25840_VIN4_CH2 | + CX25840_VIN8_CH1 | + CX25840_SVIDEO_ON, + .amux = CX25840_AUDIO7, + } }, + }, + [CX23885_BOARD_COMPRO_VIDEOMATE_E800] = { + .name = "Compro VideoMate E800", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_HAUPPAUGE_HVR1290] = { + .name = "Hauppauge WinTV-HVR1290", + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_MYGICA_X8558PRO] = { + .name = "Mygica X8558 PRO DMB-TH", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_LEADTEK_WINFAST_PXTV1200] = { + .name = "LEADTEK WinFast PxTV1200", + .porta = CX23885_ANALOG_VIDEO, + .tuner_type = TUNER_XC2028, + .tuner_addr = 0x61, + .tuner_bus = 1, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2 | + CX25840_NONE0_CH3, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_VIN7_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN8_CH3 | + CX25840_COMPONENT_ON, + } }, + }, + [CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = { + .name = "GoTView X5 3D Hybrid", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .input = {{ + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_VIN2_CH1 | + CX25840_VIN5_CH2, + .gpio0 = 0x02, + }, { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX23885_VMUX_COMPOSITE1, + }, { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + } }, + }, + [CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF] = { + .ci_type = 2, + .name = "NetUP Dual DVB-T/C-CI RF", + .porta = CX23885_ANALOG_VIDEO, + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + .num_fds_portb = 2, + .num_fds_portc = 2, + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x64, + .input = { { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE1, + } }, + }, + [CX23885_BOARD_MPX885] = { + .name = "MPX-885", + .porta = CX23885_ANALOG_VIDEO, + .input = {{ + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE1, + .amux = CX25840_AUDIO6, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE2, + .vmux = CX25840_COMPOSITE2, + .amux = CX25840_AUDIO6, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE3, + .vmux = CX25840_COMPOSITE3, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + }, { + .type = CX23885_VMUX_COMPOSITE4, + .vmux = CX25840_COMPOSITE4, + .amux = CX25840_AUDIO7, + .gpio0 = 0, + } }, + }, + [CX23885_BOARD_MYGICA_X8507] = { + .name = "Mygica X8507", + .tuner_type = TUNER_XC5000, + .tuner_addr = 0x61, + .tuner_bus = 1, + .porta = CX23885_ANALOG_VIDEO, + .input = { + { + .type = CX23885_VMUX_TELEVISION, + .vmux = CX25840_COMPOSITE2, + .amux = CX25840_AUDIO8, + }, + { + .type = CX23885_VMUX_COMPOSITE1, + .vmux = CX25840_COMPOSITE8, + }, + { + .type = CX23885_VMUX_SVIDEO, + .vmux = CX25840_SVIDEO_LUMA3 | + CX25840_SVIDEO_CHROMA4, + }, + { + .type = CX23885_VMUX_COMPONENT, + .vmux = CX25840_COMPONENT_ON | + CX25840_VIN1_CH1 | + CX25840_VIN6_CH2 | + CX25840_VIN7_CH3, + }, + }, + }, + [CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL] = { + .name = "TerraTec Cinergy T PCIe Dual", + .portb = CX23885_MPEG_DVB, + .portc = CX23885_MPEG_DVB, + }, + [CX23885_BOARD_TEVII_S471] = { + .name = "TeVii S471", + .portb = CX23885_MPEG_DVB, + } +}; +const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); + +/* ------------------------------------------------------------------ */ +/* PCI subsystem IDs */ + +struct cx23885_subid cx23885_subids[] = { + { + .subvendor = 0x0070, + .subdevice = 0x3400, + .card = CX23885_BOARD_UNKNOWN, + }, { + .subvendor = 0x0070, + .subdevice = 0x7600, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800lp, + }, { + .subvendor = 0x0070, + .subdevice = 0x7800, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7801, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7809, + .card = CX23885_BOARD_HAUPPAUGE_HVR1800, + }, { + .subvendor = 0x0070, + .subdevice = 0x7911, + .card = CX23885_BOARD_HAUPPAUGE_HVR1250, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd500, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP, + }, { + .subvendor = 0x0070, + .subdevice = 0x7790, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + }, { + .subvendor = 0x0070, + .subdevice = 0x7797, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500Q, + }, { + .subvendor = 0x0070, + .subdevice = 0x7710, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x7717, + .card = CX23885_BOARD_HAUPPAUGE_HVR1500, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x71d3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1200, + }, { + .subvendor = 0x0070, + .subdevice = 0x8101, + .card = CX23885_BOARD_HAUPPAUGE_HVR1700, + }, { + .subvendor = 0x0070, + .subdevice = 0x8010, + .card = CX23885_BOARD_HAUPPAUGE_HVR1400, + }, { + .subvendor = 0x18ac, + .subdevice = 0xd618, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP, + }, { + .subvendor = 0x18ac, + .subdevice = 0xdb78, + .card = CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP, + }, { + .subvendor = 0x107d, + .subdevice = 0x6681, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f39, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000, + }, { + .subvendor = 0x185b, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E650F, + }, { + .subvendor = 0x6920, + .subdevice = 0x8888, + .card = CX23885_BOARD_TBS_6920, + }, { + .subvendor = 0xd470, + .subdevice = 0x9022, + .card = CX23885_BOARD_TEVII_S470, + }, { + .subvendor = 0x0001, + .subdevice = 0x2005, + .card = CX23885_BOARD_DVBWORLD_2005, + }, { + .subvendor = 0x1b55, + .subdevice = 0x2a2c, + .card = CX23885_BOARD_NETUP_DUAL_DVBS2_CI, + }, { + .subvendor = 0x0070, + .subdevice = 0x2211, + .card = CX23885_BOARD_HAUPPAUGE_HVR1270, + }, { + .subvendor = 0x0070, + .subdevice = 0x2215, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x221d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x2251, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x2259, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255_22111, + }, { + .subvendor = 0x0070, + .subdevice = 0x2291, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x2295, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x2299, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x229d, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f0, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f1, + .card = CX23885_BOARD_HAUPPAUGE_HVR1255, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f2, + .card = CX23885_BOARD_HAUPPAUGE_HVR1275, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f3, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x0070, + .subdevice = 0x22f4, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, + }, { + .subvendor = 0x0070, + .subdevice = 0x22f5, + .card = CX23885_BOARD_HAUPPAUGE_HVR1210, /* HVR1215 */ + }, { + .subvendor = 0x14f1, + .subdevice = 0x8651, + .card = CX23885_BOARD_MYGICA_X8506, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8657, + .card = CX23885_BOARD_MAGICPRO_PROHDTVE2, + }, { + .subvendor = 0x0070, + .subdevice = 0x8541, + .card = CX23885_BOARD_HAUPPAUGE_HVR1850, + }, { + .subvendor = 0x1858, + .subdevice = 0xe800, + .card = CX23885_BOARD_COMPRO_VIDEOMATE_E800, + }, { + .subvendor = 0x0070, + .subdevice = 0x8551, + .card = CX23885_BOARD_HAUPPAUGE_HVR1290, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8578, + .card = CX23885_BOARD_MYGICA_X8558PRO, + }, { + .subvendor = 0x107d, + .subdevice = 0x6f22, + .card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200, + }, { + .subvendor = 0x5654, + .subdevice = 0x2390, + .card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID, + }, { + .subvendor = 0x1b55, + .subdevice = 0xe2e4, + .card = CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF, + }, { + .subvendor = 0x14f1, + .subdevice = 0x8502, + .card = CX23885_BOARD_MYGICA_X8507, + }, { + .subvendor = 0x153b, + .subdevice = 0x117e, + .card = CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL, + }, { + .subvendor = 0xd471, + .subdevice = 0x9022, + .card = CX23885_BOARD_TEVII_S471, + }, +}; +const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); + +void cx23885_card_list(struct cx23885_dev *dev) +{ + int i; + + if (0 == dev->pci->subsystem_vendor && + 0 == dev->pci->subsystem_device) { + printk(KERN_INFO + "%s: Board has no valid PCIe Subsystem ID and can't\n" + "%s: be autodetected. Pass card=<n> insmod option\n" + "%s: to workaround that. Redirect complaints to the\n" + "%s: vendor of the TV card. Best regards,\n" + "%s: -- tux\n", + dev->name, dev->name, dev->name, dev->name, dev->name); + } else { + printk(KERN_INFO + "%s: Your board isn't known (yet) to the driver.\n" + "%s: Try to pick one of the existing card configs via\n" + "%s: card=<n> insmod option. Updating to the latest\n" + "%s: version might help as well.\n", + dev->name, dev->name, dev->name, dev->name); + } + printk(KERN_INFO "%s: Here is a list of valid choices for the card=<n> insmod option:\n", + dev->name); + for (i = 0; i < cx23885_bcount; i++) + printk(KERN_INFO "%s: card=%d -> %s\n", + dev->name, i, cx23885_boards[i].name); +} + +static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) +{ + struct tveeprom tv; + + tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv, + eeprom_data); + + /* Make sure we support the board model */ + switch (tv.model) { + case 22001: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Blast */ + case 22009: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Blast */ + case 22011: + /* WinTV-HVR1270 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22019: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22021: + /* WinTV-HVR1275 (PCIe, Retail, half height) + * ATSC/QAM and basic analog, IR Recv */ + case 22029: + /* WinTV-HVR1210 (PCIe, Retail, half height) + * DVB-T and basic analog, IR Recv */ + case 22101: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Blast */ + case 22109: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Blast */ + case 22111: + /* WinTV-HVR1270 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22119: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ + case 22121: + /* WinTV-HVR1275 (PCIe, Retail, full height) + * ATSC/QAM and basic analog, IR Recv */ + case 22129: + /* WinTV-HVR1210 (PCIe, Retail, full height) + * DVB-T and basic analog, IR Recv */ + case 71009: + /* WinTV-HVR1200 (PCIe, Retail, full height) + * DVB-T and basic analog */ + case 71359: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71439: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71449: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71939: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71949: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71959: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 71979: + /* WinTV-HVR1200 (PCIe, OEM, half height) + * DVB-T and basic analog */ + case 71999: + /* WinTV-HVR1200 (PCIe, OEM, full height) + * DVB-T and basic analog */ + case 76601: + /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual + channel ATSC and MPEG2 HW Encoder */ + case 77001: + /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC + and Basic analog */ + case 77011: + /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC + and Basic analog */ + case 77041: + /* WinTV-HVR1500Q (Express Card, OEM, No IR, ATSC/QAM + and Basic analog */ + case 77051: + /* WinTV-HVR1500Q (Express Card, Retail, No IR, ATSC/QAM + and Basic analog */ + case 78011: + /* WinTV-HVR1800 (PCIe, Retail, 3.5mm in, IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78501: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78521: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78531: + /* WinTV-HVR1800 (PCIe, OEM, RCA in, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 78631: + /* WinTV-HVR1800 (PCIe, OEM, No IR, No FM, + Dual channel ATSC and MPEG2 HW Encoder */ + case 79001: + /* WinTV-HVR1250 (PCIe, Retail, IR, full height, + ATSC and Basic analog */ + case 79101: + /* WinTV-HVR1250 (PCIe, Retail, IR, half height, + ATSC and Basic analog */ + case 79501: + /* WinTV-HVR1250 (PCIe, No IR, half height, + ATSC [at least] and Basic analog) */ + case 79561: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 79571: + /* WinTV-HVR1250 (PCIe, OEM, No IR, full height, + ATSC and Basic analog */ + case 79671: + /* WinTV-HVR1250 (PCIe, OEM, No IR, half height, + ATSC and Basic analog */ + case 80019: + /* WinTV-HVR1400 (Express Card, Retail, IR, + * DVB-T and Basic analog */ + case 81509: + /* WinTV-HVR1700 (PCIe, OEM, No IR, half height) + * DVB-T and MPEG2 HW Encoder */ + case 81519: + /* WinTV-HVR1700 (PCIe, OEM, No IR, full height) + * DVB-T and MPEG2 HW Encoder */ + break; + case 85021: + /* WinTV-HVR1850 (PCIe, Retail, 3.5mm in, IR, FM, + Dual channel ATSC and MPEG2 HW Encoder */ + break; + case 85721: + /* WinTV-HVR1290 (PCIe, OEM, RCA in, IR, + Dual channel ATSC and Basic analog */ + break; + default: + printk(KERN_WARNING "%s: warning: " + "unknown hauppauge model #%d\n", + dev->name, tv.model); + break; + } + + printk(KERN_INFO "%s: hauppauge eeprom: model=%d\n", + dev->name, tv.model); +} + +int cx23885_tuner_callback(void *priv, int component, int command, int arg) +{ + struct cx23885_tsport *port = priv; + struct cx23885_dev *dev = port->dev; + u32 bitmask = 0; + + if ((command == XC2028_RESET_CLK) || (command == XC2028_I2C_FLUSH)) + return 0; + + if (command != 0) { + printk(KERN_ERR "%s(): Unknown command 0x%x.\n", + __func__, command); + return -EINVAL; + } + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + /* Tuner Reset Command */ + bitmask = 0x04; + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* Two identical tuners on two different i2c buses, + * we need to reset the correct gpio. */ + if (port->nr == 1) + bitmask = 0x01; + else if (port->nr == 2) + bitmask = 0x04; + break; + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + /* Tuner Reset Command */ + bitmask = 0x02; + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_tuner_reset(dev, port->nr); + break; + } + + if (bitmask) { + /* Drive the tuner into reset and back out */ + cx_clear(GP0_IO, bitmask); + mdelay(200); + cx_set(GP0_IO, bitmask); + } + + return 0; +} + +void cx23885_gpio_setup(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* GPIO-0 cx24227 demodulator reset */ + cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + /* GPIO-0 cx24227 demodulator */ + /* GPIO-2 xc3028 tuner */ + + /* Put the parts into reset */ + cx_set(GP0_IO, 0x00050000); + cx_clear(GP0_IO, 0x00000005); + msleep(5); + + /* Bring the parts out of reset */ + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + /* GPIO-0 cx24227 demodulator reset */ + /* GPIO-2 xc5000 tuner reset */ + cx_set(GP0_IO, 0x00050005); /* Bring the part out of reset */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + + /* CX23417 GPIO's */ + /* EIO15 Zilog Reset */ + /* EIO14 S5H1409/CX24227 Reset */ + mc417_gpio_enable(dev, GPIO_15 | GPIO_14, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_15 | GPIO_14); + mdelay(100); + + /* Bring the demod and blaster out of reset */ + mc417_gpio_set(dev, GPIO_15 | GPIO_14); + mdelay(100); + + /* Force the TDA8295A into reset and back */ + cx23885_gpio_enable(dev, GPIO_2, 1); + cx23885_gpio_set(dev, GPIO_2); + mdelay(20); + cx23885_gpio_clear(dev, GPIO_2); + mdelay(20); + cx23885_gpio_set(dev, GPIO_2); + mdelay(20); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + /* GPIO-0 tda10048 demodulator reset */ + /* GPIO-2 tda18271 tuner reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1700: + /* GPIO-0 TDA10048 demodulator reset */ + /* GPIO-2 TDA8295A Reset */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + + /* The following GPIO's are on the interna AVCore (cx25840) */ + /* GPIO-19 IR_RX */ + /* GPIO-20 IR_TX 416/DVBT Select */ + /* GPIO-21 IIS DAT */ + /* GPIO-22 IIS WCLK */ + /* GPIO-23 IIS BCLK */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + /* GPIO-0 Dibcom7000p demodulator reset */ + /* GPIO-2 xc3028L tuner reset */ + /* GPIO-13 LED */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00050000); + mdelay(20); + cx_clear(GP0_IO, 0x00000005); + mdelay(20); + cx_set(GP0_IO, 0x00050005); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + /* GPIO-0 xc5000 tuner reset i2c bus 0 */ + /* GPIO-1 s5h1409 demod reset i2c bus 0 */ + /* GPIO-2 xc5000 tuner reset i2c bus 1 */ + /* GPIO-3 s5h1409 demod reset i2c bus 0 */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + /* GPIO-0 portb xc3028 reset */ + /* GPIO-1 portb zl10353 reset */ + /* GPIO-2 portc xc3028 reset */ + /* GPIO-3 portc zl10353 reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x000f0000); + mdelay(20); + cx_clear(GP0_IO, 0x0000000f); + mdelay(20); + cx_set(GP0_IO, 0x000f000f); + break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + /* GPIO-2 xc3028 tuner reset */ + + /* The following GPIO's are on the internal AVCore (cx25840) */ + /* GPIO-? zl10353 demod reset */ + + /* Put the parts into reset and back */ + cx_set(GP0_IO, 0x00040000); + mdelay(20); + cx_clear(GP0_IO, 0x00000004); + mdelay(20); + cx_set(GP0_IO, 0x00040004); + break; + case CX23885_BOARD_TBS_6920: + cx_write(MC417_CTL, 0x00000036); + cx_write(MC417_OEN, 0x00001000); + cx_set(MC417_RWD, 0x00000002); + mdelay(200); + cx_clear(MC417_RWD, 0x00000800); + mdelay(200); + cx_set(MC417_RWD, 0x00000800); + mdelay(200); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + /* GPIO-0 INTA from CiMax1 + GPIO-1 INTB from CiMax2 + GPIO-2 reset chips + GPIO-3 to GPIO-10 data/addr for CA + GPIO-11 ~CS0 to CiMax1 + GPIO-12 ~CS1 to CiMax2 + GPIO-13 ADL0 load LSB addr + GPIO-14 ADL1 load MSB addr + GPIO-15 ~RDY from CiMax + GPIO-17 ~RD to CiMax + GPIO-18 ~WR to CiMax + */ + cx_set(GP0_IO, 0x00040000); /* GPIO as out */ + /* GPIO1 and GPIO2 as INTA and INTB from CiMaxes, reset low */ + cx_clear(GP0_IO, 0x00030004); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00040004); /* GPIO as out, reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO3-18 pins */ + /* GPIO-15 IN as ~ACK, rest as OUT */ + cx_write(MC417_OEN, 0x00001000); + /* ~RD, ~WR high; ADL0, ADL1 low; ~CS0, ~CS1 high */ + cx_write(MC417_RWD, 0x0000c300); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + /* GPIO-5 RF Control: 0 = RF1 Terrestrial, 1 = RF2 Cable */ + /* GPIO-6 I2C Gate which can isolate the demod from the bus */ + /* GPIO-9 Demod reset */ + + /* Put the parts into reset and back */ + cx23885_gpio_enable(dev, GPIO_9 | GPIO_6 | GPIO_5, 1); + cx23885_gpio_set(dev, GPIO_9 | GPIO_6 | GPIO_5); + cx23885_gpio_clear(dev, GPIO_9); + mdelay(20); + cx23885_gpio_set(dev, GPIO_9); + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + case CX23885_BOARD_MYGICA_X8507: + /* GPIO-0 (0)Analog / (1)Digital TV */ + /* GPIO-1 reset XC5000 */ + /* GPIO-2 reset LGS8GL5 / LGS8G75 */ + cx23885_gpio_enable(dev, GPIO_0 | GPIO_1 | GPIO_2, 1); + cx23885_gpio_clear(dev, GPIO_1 | GPIO_2); + mdelay(100); + cx23885_gpio_set(dev, GPIO_0 | GPIO_1 | GPIO_2); + mdelay(100); + break; + case CX23885_BOARD_MYGICA_X8558PRO: + /* GPIO-0 reset first ATBM8830 */ + /* GPIO-1 reset second ATBM8830 */ + cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1); + cx23885_gpio_clear(dev, GPIO_0 | GPIO_1); + mdelay(100); + cx23885_gpio_set(dev, GPIO_0 | GPIO_1); + mdelay(100); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + /* GPIO-0 656_CLK */ + /* GPIO-1 656_D0 */ + /* GPIO-2 Wake# */ + /* GPIO-3-10 cx23417 data0-7 */ + /* GPIO-11-14 cx23417 addr0-3 */ + /* GPIO-15-18 cx23417 READY, CS, RD, WR */ + /* GPIO-19 IR_RX */ + /* GPIO-20 C_IR_TX */ + /* GPIO-21 I2S DAT */ + /* GPIO-22 I2S WCLK */ + /* GPIO-23 I2S BCLK */ + /* ALT GPIO: EXP GPIO LATCH */ + + /* CX23417 GPIO's */ + /* GPIO-14 S5H1411/CX24228 Reset */ + /* GPIO-13 EEPROM write protect */ + mc417_gpio_enable(dev, GPIO_14 | GPIO_13, 1); + + /* Put the demod into reset and protect the eeprom */ + mc417_gpio_clear(dev, GPIO_14 | GPIO_13); + mdelay(100); + + /* Bring the demod out of reset */ + mc417_gpio_set(dev, GPIO_14); + mdelay(100); + + /* CX24228 GPIO */ + /* Connected to IF / Mux */ + break; + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */ + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + /* GPIO-0 ~INT in + GPIO-1 TMS out + GPIO-2 ~reset chips out + GPIO-3 to GPIO-10 data/addr for CA in/out + GPIO-11 ~CS out + GPIO-12 ADDR out + GPIO-13 ~WR out + GPIO-14 ~RD out + GPIO-15 ~RDY in + GPIO-16 TCK out + GPIO-17 TDO in + GPIO-18 TDI out + */ + cx_set(GP0_IO, 0x00060000); /* GPIO-1,2 as out */ + /* GPIO-0 as INT, reset & TMS low */ + cx_clear(GP0_IO, 0x00010006); + mdelay(100);/* reset delay */ + cx_set(GP0_IO, 0x00000004); /* reset high */ + cx_write(MC417_CTL, 0x00000037);/* enable GPIO-3..18 pins */ + /* GPIO-17 is TDO in, GPIO-15 is ~RDY in, rest is out */ + cx_write(MC417_OEN, 0x00005000); + /* ~RD, ~WR high; ADDR low; ~CS high */ + cx_write(MC417_RWD, 0x00000d00); + /* enable irq */ + cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/ + break; + } +} + +int cx23885_ir_init(struct cx23885_dev *dev) +{ + static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = { + { + .flags = V4L2_SUBDEV_IO_PIN_INPUT, + .pin = CX23885_PIN_IR_RX_GPIO19, + .function = CX23885_PAD_IR_RX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + }, { + .flags = V4L2_SUBDEV_IO_PIN_OUTPUT, + .pin = CX23885_PIN_IR_TX_GPIO20, + .function = CX23885_PAD_IR_TX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + } + }; + const size_t ir_rxtx_pin_cfg_count = ARRAY_SIZE(ir_rxtx_pin_cfg); + + static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = { + { + .flags = V4L2_SUBDEV_IO_PIN_INPUT, + .pin = CX23885_PIN_IR_RX_GPIO19, + .function = CX23885_PAD_IR_RX, + .value = 0, + .strength = CX25840_PIN_DRIVE_MEDIUM, + } + }; + const size_t ir_rx_pin_cfg_count = ARRAY_SIZE(ir_rx_pin_cfg); + + struct v4l2_subdev_ir_parameters params; + int ret = 0; + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + /* FIXME: Implement me */ + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + ret = cx23888_ir_probe(dev); + if (ret) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rx_pin_cfg_count, ir_rx_pin_cfg); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + ret = cx23888_ir_probe(dev); + if (ret) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_888_IR); + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); + /* + * For these boards we need to invert the Tx output via the + * IR controller to have the LED off while idle + */ + v4l2_subdev_call(dev->sd_ir, ir, tx_g_parameters, ¶ms); + params.enable = false; + params.shutdown = false; + params.invert_level = true; + v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); + params.shutdown = true; + v4l2_subdev_call(dev->sd_ir, ir, tx_s_parameters, ¶ms); + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + if (!enable_885_ir) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); + if (dev->sd_ir == NULL) { + ret = -ENODEV; + break; + } + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rx_pin_cfg_count, ir_rx_pin_cfg); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + if (!enable_885_ir) + break; + dev->sd_ir = cx23885_find_hw(dev, CX23885_HW_AV_CORE); + if (dev->sd_ir == NULL) { + ret = -ENODEV; + break; + } + v4l2_subdev_call(dev->sd_cx25840, core, s_io_pin_config, + ir_rxtx_pin_cfg_count, ir_rxtx_pin_cfg); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + request_module("ir-kbd-i2c"); + break; + } + + return ret; +} + +void cx23885_ir_fini(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + cx23885_irq_remove(dev, PCI_MSK_IR); + cx23888_ir_remove(dev); + dev->sd_ir = NULL; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + cx23885_irq_remove(dev, PCI_MSK_AV_CORE); + /* sd_ir is a duplicate pointer to the AV Core, just clear it */ + dev->sd_ir = NULL; + break; + } +} + +int netup_jtag_io(void *device, int tms, int tdi, int read_tdo) +{ + int data; + int tdo = 0; + struct cx23885_dev *dev = (struct cx23885_dev *)device; + /*TMS*/ + data = ((cx_read(GP0_IO)) & (~0x00000002)); + data |= (tms ? 0x00020002 : 0x00020000); + cx_write(GP0_IO, data); + + /*TDI*/ + data = ((cx_read(MC417_RWD)) & (~0x0000a000)); + data |= (tdi ? 0x00008000 : 0); + cx_write(MC417_RWD, data); + if (read_tdo) + tdo = (data & 0x00004000) ? 1 : 0; /*TDO*/ + + cx_write(MC417_RWD, data | 0x00002000); + udelay(1); + /*TCK*/ + cx_write(MC417_RWD, data); + + return tdo; +} + +void cx23885_ir_pci_int_enable(struct cx23885_dev *dev) +{ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + if (dev->sd_ir) + cx23885_irq_add_enable(dev, PCI_MSK_IR); + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + if (dev->sd_ir) + cx23885_irq_add_enable(dev, PCI_MSK_AV_CORE); + break; + } +} + +void cx23885_card_setup(struct cx23885_dev *dev) +{ + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; + + static u8 eeprom[256]; + + if (dev->i2c_bus[0].i2c_rc == 0) { + dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_bus[0].i2c_client, + eeprom, sizeof(eeprom)); + } + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + if (dev->i2c_bus[0].i2c_rc == 0) { + if (eeprom[0x80] != 0x84) + hauppauge_eeprom(dev, eeprom+0xc0); + else + hauppauge_eeprom(dev, eeprom+0x80); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0x80); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + if (dev->i2c_bus[0].i2c_rc == 0) + hauppauge_eeprom(dev, eeprom+0xc0); + break; + } + + switch (dev->board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + /* break omitted intentionally */ + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + /* Defaults for VID B - Analog encoder */ + /* DREQ_POL, SMODE, PUNC_CLK, MCLK_POL Serial bus + punc clk */ + ts1->gen_ctrl_val = 0x10e; + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + + /* APB_TSVALERR_POL (active low)*/ + ts1->vld_misc_val = 0x2000; + ts1->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4 | 0xc); + cx_write(0x130184, 0xc); + + /* Defaults for VID C */ + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_TBS_6920: + ts1->gen_ctrl_val = 0x4; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TEVII_S471: + case CX23885_BOARD_DVBWORLD_2005: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_MYGICA_X8558PRO: + ts1->gen_ctrl_val = 0x5; /* Parallel */ + ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_HAUPPAUGE_HVR1400: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1210: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + default: + ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ + ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + } + + /* Certain boards support analog, or require the avcore to be + * loaded, ensure this happens. + */ + switch (dev->board) { + case CX23885_BOARD_TEVII_S470: + /* Currently only enabled for the integrated IR controller */ + if (!enable_885_ir) + break; + case CX23885_BOARD_HAUPPAUGE_HVR1250: + case CX23885_BOARD_HAUPPAUGE_HVR1800: + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200: + case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID: + case CX23885_BOARD_HAUPPAUGE_HVR1500: + case CX23885_BOARD_MPX885: + case CX23885_BOARD_MYGICA_X8507: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[2].i2c_adap, + "cx25840", 0x88 >> 1, NULL); + if (dev->sd_cx25840) { + dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE; + v4l2_subdev_call(dev->sd_cx25840, core, load_fw); + } + break; + } + + /* AUX-PLL 27MHz CLK */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_initialize(dev); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + int ret; + const struct firmware *fw; + const char *filename = "dvb-netup-altera-01.fw"; + char *action = "configure"; + static struct netup_card_info cinfo; + struct altera_config netup_config = { + .dev = dev, + .action = action, + .jtag_io = netup_jtag_io, + }; + + netup_initialize(dev); + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + if (netup_card_rev) + cinfo.rev = netup_card_rev; + + switch (cinfo.rev) { + case 0x4: + filename = "dvb-netup-altera-04.fw"; + break; + default: + filename = "dvb-netup-altera-01.fw"; + break; + } + printk(KERN_INFO "NetUP card rev=0x%x fw_filename=%s\n", + cinfo.rev, filename); + + ret = request_firmware(&fw, filename, &dev->pci->dev); + if (ret != 0) + printk(KERN_ERR "did not find the firmware file. (%s) " + "Please see linux/Documentation/dvb/ for more details " + "on firmware-problems.", filename); + else + altera_init(&netup_config, fw); + + release_firmware(fw); + break; + } + } +} + +/* ------------------------------------------------------------------ */ diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c new file mode 100644 index 00000000000..697728f0943 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -0,0 +1,2234 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kmod.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <asm/div64.h> +#include <linux/firmware.h> + +#include "cx23885.h" +#include "cimax2.h" +#include "altera-ci.h" +#include "cx23888-ir.h" +#include "cx23885-ir.h" +#include "cx23885-av.h" +#include "cx23885-input.h" + +MODULE_DESCRIPTION("Driver for cx23885 based TV cards"); +MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(CX23885_VERSION); + +static unsigned int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "enable debug messages"); + +static unsigned int card[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +module_param_array(card, int, NULL, 0444); +MODULE_PARM_DESC(card, "card type"); + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +static unsigned int cx23885_devcount; + +#define NO_SYNC_LINE (-1U) + +/* FIXME, these allocations will change when + * analog arrives. The be reviewed. + * CX23887 Assumptions + * 1 line = 16 bytes of CDT + * cmds size = 80 + * cdt size = 16 * linesize + * iqsize = 64 + * maxlines = 6 + * + * Address Space: + * 0x00000000 0x00008fff FIFO clusters + * 0x00010000 0x000104af Channel Management Data Structures + * 0x000104b0 0x000104ff Free + * 0x00010500 0x000108bf 15 channels * iqsize + * 0x000108c0 0x000108ff Free + * 0x00010900 0x00010e9f IQ's + Cluster Descriptor Tables + * 15 channels * (iqsize + (maxlines * linesize)) + * 0x00010ea0 0x00010xxx Free + */ + +static struct sram_channel cx23885_sram_channels[] = { + [SRAM_CH01] = { + .name = "VID A", + .cmds_start = 0x10000, + .ctrl_start = 0x10380, + .cdt = 0x104c0, + .fifo_start = 0x40, + .fifo_size = 0x2800, + .ptr1_reg = DMA1_PTR1, + .ptr2_reg = DMA1_PTR2, + .cnt1_reg = DMA1_CNT1, + .cnt2_reg = DMA1_CNT2, + }, + [SRAM_CH02] = { + .name = "ch2", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA2_PTR1, + .ptr2_reg = DMA2_PTR2, + .cnt1_reg = DMA2_CNT1, + .cnt2_reg = DMA2_CNT2, + }, + [SRAM_CH03] = { + .name = "TS1 B", + .cmds_start = 0x100A0, + .ctrl_start = 0x10400, + .cdt = 0x10580, + .fifo_start = 0x5000, + .fifo_size = 0x1000, + .ptr1_reg = DMA3_PTR1, + .ptr2_reg = DMA3_PTR2, + .cnt1_reg = DMA3_CNT1, + .cnt2_reg = DMA3_CNT2, + }, + [SRAM_CH04] = { + .name = "ch4", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA4_PTR1, + .ptr2_reg = DMA4_PTR2, + .cnt1_reg = DMA4_CNT1, + .cnt2_reg = DMA4_CNT2, + }, + [SRAM_CH05] = { + .name = "ch5", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH06] = { + .name = "TS2 C", + .cmds_start = 0x10140, + .ctrl_start = 0x10440, + .cdt = 0x105e0, + .fifo_start = 0x6000, + .fifo_size = 0x1000, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH07] = { + .name = "TV Audio", + .cmds_start = 0x10190, + .ctrl_start = 0x10480, + .cdt = 0x10a00, + .fifo_start = 0x7000, + .fifo_size = 0x1000, + .ptr1_reg = DMA6_PTR1, + .ptr2_reg = DMA6_PTR2, + .cnt1_reg = DMA6_CNT1, + .cnt2_reg = DMA6_CNT2, + }, + [SRAM_CH08] = { + .name = "ch8", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA7_PTR1, + .ptr2_reg = DMA7_PTR2, + .cnt1_reg = DMA7_CNT1, + .cnt2_reg = DMA7_CNT2, + }, + [SRAM_CH09] = { + .name = "ch9", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA8_PTR1, + .ptr2_reg = DMA8_PTR2, + .cnt1_reg = DMA8_CNT1, + .cnt2_reg = DMA8_CNT2, + }, +}; + +static struct sram_channel cx23887_sram_channels[] = { + [SRAM_CH01] = { + .name = "VID A", + .cmds_start = 0x10000, + .ctrl_start = 0x105b0, + .cdt = 0x107b0, + .fifo_start = 0x40, + .fifo_size = 0x2800, + .ptr1_reg = DMA1_PTR1, + .ptr2_reg = DMA1_PTR2, + .cnt1_reg = DMA1_CNT1, + .cnt2_reg = DMA1_CNT2, + }, + [SRAM_CH02] = { + .name = "VID A (VBI)", + .cmds_start = 0x10050, + .ctrl_start = 0x105F0, + .cdt = 0x10810, + .fifo_start = 0x3000, + .fifo_size = 0x1000, + .ptr1_reg = DMA2_PTR1, + .ptr2_reg = DMA2_PTR2, + .cnt1_reg = DMA2_CNT1, + .cnt2_reg = DMA2_CNT2, + }, + [SRAM_CH03] = { + .name = "TS1 B", + .cmds_start = 0x100A0, + .ctrl_start = 0x10630, + .cdt = 0x10870, + .fifo_start = 0x5000, + .fifo_size = 0x1000, + .ptr1_reg = DMA3_PTR1, + .ptr2_reg = DMA3_PTR2, + .cnt1_reg = DMA3_CNT1, + .cnt2_reg = DMA3_CNT2, + }, + [SRAM_CH04] = { + .name = "ch4", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA4_PTR1, + .ptr2_reg = DMA4_PTR2, + .cnt1_reg = DMA4_CNT1, + .cnt2_reg = DMA4_CNT2, + }, + [SRAM_CH05] = { + .name = "ch5", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH06] = { + .name = "TS2 C", + .cmds_start = 0x10140, + .ctrl_start = 0x10670, + .cdt = 0x108d0, + .fifo_start = 0x6000, + .fifo_size = 0x1000, + .ptr1_reg = DMA5_PTR1, + .ptr2_reg = DMA5_PTR2, + .cnt1_reg = DMA5_CNT1, + .cnt2_reg = DMA5_CNT2, + }, + [SRAM_CH07] = { + .name = "TV Audio", + .cmds_start = 0x10190, + .ctrl_start = 0x106B0, + .cdt = 0x10930, + .fifo_start = 0x7000, + .fifo_size = 0x1000, + .ptr1_reg = DMA6_PTR1, + .ptr2_reg = DMA6_PTR2, + .cnt1_reg = DMA6_CNT1, + .cnt2_reg = DMA6_CNT2, + }, + [SRAM_CH08] = { + .name = "ch8", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA7_PTR1, + .ptr2_reg = DMA7_PTR2, + .cnt1_reg = DMA7_CNT1, + .cnt2_reg = DMA7_CNT2, + }, + [SRAM_CH09] = { + .name = "ch9", + .cmds_start = 0x0, + .ctrl_start = 0x0, + .cdt = 0x0, + .fifo_start = 0x0, + .fifo_size = 0x0, + .ptr1_reg = DMA8_PTR1, + .ptr2_reg = DMA8_PTR2, + .cnt1_reg = DMA8_CNT1, + .cnt2_reg = DMA8_CNT2, + }, +}; + +void cx23885_irq_add(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask |= mask; + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask |= mask; + cx_set(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask) +{ + u32 v; + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + v = mask & dev->pci_irqmask; + if (v) + cx_set(PCI_INT_MSK, v); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static inline void cx23885_irq_enable_all(struct cx23885_dev *dev) +{ + cx23885_irq_enable(dev, 0xffffffff); +} + +void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + cx_clear(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static inline void cx23885_irq_disable_all(struct cx23885_dev *dev) +{ + cx23885_irq_disable(dev, 0xffffffff); +} + +void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask) +{ + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + dev->pci_irqmask &= ~mask; + cx_clear(PCI_INT_MSK, mask); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); +} + +static u32 cx23885_irq_get_mask(struct cx23885_dev *dev) +{ + u32 v; + unsigned long flags; + spin_lock_irqsave(&dev->pci_irqmask_lock, flags); + + v = cx_read(PCI_INT_MSK); + + spin_unlock_irqrestore(&dev->pci_irqmask_lock, flags); + return v; +} + +static int cx23885_risc_decode(u32 risc) +{ + static char *instr[16] = { + [RISC_SYNC >> 28] = "sync", + [RISC_WRITE >> 28] = "write", + [RISC_WRITEC >> 28] = "writec", + [RISC_READ >> 28] = "read", + [RISC_READC >> 28] = "readc", + [RISC_JUMP >> 28] = "jump", + [RISC_SKIP >> 28] = "skip", + [RISC_WRITERM >> 28] = "writerm", + [RISC_WRITECM >> 28] = "writecm", + [RISC_WRITECR >> 28] = "writecr", + }; + static int incr[16] = { + [RISC_WRITE >> 28] = 3, + [RISC_JUMP >> 28] = 3, + [RISC_SKIP >> 28] = 1, + [RISC_SYNC >> 28] = 1, + [RISC_WRITERM >> 28] = 3, + [RISC_WRITECM >> 28] = 3, + [RISC_WRITECR >> 28] = 4, + }; + static char *bits[] = { + "12", "13", "14", "resync", + "cnt0", "cnt1", "18", "19", + "20", "21", "22", "23", + "irq1", "irq2", "eol", "sol", + }; + int i; + + printk("0x%08x [ %s", risc, + instr[risc >> 28] ? instr[risc >> 28] : "INVALID"); + for (i = ARRAY_SIZE(bits) - 1; i >= 0; i--) + if (risc & (1 << (i + 12))) + printk(" %s", bits[i]); + printk(" count=%d ]\n", risc & 0xfff); + return incr[risc >> 28] ? incr[risc >> 28] : 1; +} + +void cx23885_wakeup(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, u32 count) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + + do_gettimeofday(&buf->vb.ts); + dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) + del_timer(&q->timeout); + else + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + if (bc != 1) + printk(KERN_WARNING "%s: %d buffers handled (should be 1)\n", + __func__, bc); +} + +int cx23885_sram_channel_setup(struct cx23885_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc) +{ + unsigned int i, lines; + u32 cdt; + + if (ch->cmds_start == 0) { + dprintk(1, "%s() Erasing channel [%s]\n", __func__, + ch->name); + cx_write(ch->ptr1_reg, 0); + cx_write(ch->ptr2_reg, 0); + cx_write(ch->cnt2_reg, 0); + cx_write(ch->cnt1_reg, 0); + return 0; + } else { + dprintk(1, "%s() Configuring channel [%s]\n", __func__, + ch->name); + } + + bpl = (bpl + 7) & ~7; /* alignment */ + cdt = ch->cdt; + lines = ch->fifo_size / bpl; + if (lines > 6) + lines = 6; + BUG_ON(lines < 2); + + cx_write(8 + 0, RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + cx_write(8 + 4, 8); + cx_write(8 + 8, 0); + + /* write CDT */ + for (i = 0; i < lines; i++) { + dprintk(2, "%s() 0x%08x <- 0x%08x\n", __func__, cdt + 16*i, + ch->fifo_start + bpl*i); + cx_write(cdt + 16*i, ch->fifo_start + bpl*i); + cx_write(cdt + 16*i + 4, 0); + cx_write(cdt + 16*i + 8, 0); + cx_write(cdt + 16*i + 12, 0); + } + + /* write CMDS */ + if (ch->jumponly) + cx_write(ch->cmds_start + 0, 8); + else + cx_write(ch->cmds_start + 0, risc); + cx_write(ch->cmds_start + 4, 0); /* 64 bits 63-32 */ + cx_write(ch->cmds_start + 8, cdt); + cx_write(ch->cmds_start + 12, (lines*16) >> 3); + cx_write(ch->cmds_start + 16, ch->ctrl_start); + if (ch->jumponly) + cx_write(ch->cmds_start + 20, 0x80000000 | (64 >> 2)); + else + cx_write(ch->cmds_start + 20, 64 >> 2); + for (i = 24; i < 80; i += 4) + cx_write(ch->cmds_start + i, 0); + + /* fill registers */ + cx_write(ch->ptr1_reg, ch->fifo_start); + cx_write(ch->ptr2_reg, cdt); + cx_write(ch->cnt2_reg, (lines*16) >> 3); + cx_write(ch->cnt1_reg, (bpl >> 3) - 1); + + dprintk(2, "[bridge %d] sram setup %s: bpl=%d lines=%d\n", + dev->bridge, + ch->name, + bpl, + lines); + + return 0; +} + +void cx23885_sram_channel_dump(struct cx23885_dev *dev, + struct sram_channel *ch) +{ + static char *name[] = { + "init risc lo", + "init risc hi", + "cdt base", + "cdt size", + "iq base", + "iq size", + "risc pc lo", + "risc pc hi", + "iq wr ptr", + "iq rd ptr", + "cdt current", + "pci target lo", + "pci target hi", + "line / byte", + }; + u32 risc; + unsigned int i, j, n; + + printk(KERN_WARNING "%s: %s - dma channel status dump\n", + dev->name, ch->name); + for (i = 0; i < ARRAY_SIZE(name); i++) + printk(KERN_WARNING "%s: cmds: %-15s: 0x%08x\n", + dev->name, name[i], + cx_read(ch->cmds_start + 4*i)); + + for (i = 0; i < 4; i++) { + risc = cx_read(ch->cmds_start + 4 * (i + 14)); + printk(KERN_WARNING "%s: risc%d: ", dev->name, i); + cx23885_risc_decode(risc); + } + for (i = 0; i < (64 >> 2); i += n) { + risc = cx_read(ch->ctrl_start + 4 * i); + /* No consideration for bits 63-32 */ + + printk(KERN_WARNING "%s: (0x%08x) iq %x: ", dev->name, + ch->ctrl_start + 4 * i, i); + n = cx23885_risc_decode(risc); + for (j = 1; j < n; j++) { + risc = cx_read(ch->ctrl_start + 4 * (i + j)); + printk(KERN_WARNING "%s: iq %x: 0x%08x [ arg #%d ]\n", + dev->name, i+j, risc, j); + } + } + + printk(KERN_WARNING "%s: fifo: 0x%08x -> 0x%x\n", + dev->name, ch->fifo_start, ch->fifo_start+ch->fifo_size); + printk(KERN_WARNING "%s: ctrl: 0x%08x -> 0x%x\n", + dev->name, ch->ctrl_start, ch->ctrl_start + 6*16); + printk(KERN_WARNING "%s: ptr1_reg: 0x%08x\n", + dev->name, cx_read(ch->ptr1_reg)); + printk(KERN_WARNING "%s: ptr2_reg: 0x%08x\n", + dev->name, cx_read(ch->ptr2_reg)); + printk(KERN_WARNING "%s: cnt1_reg: 0x%08x\n", + dev->name, cx_read(ch->cnt1_reg)); + printk(KERN_WARNING "%s: cnt2_reg: 0x%08x\n", + dev->name, cx_read(ch->cnt2_reg)); +} + +static void cx23885_risc_disasm(struct cx23885_tsport *port, + struct btcx_riscmem *risc) +{ + struct cx23885_dev *dev = port->dev; + unsigned int i, j, n; + + printk(KERN_INFO "%s: risc disasm: %p [dma=0x%08lx]\n", + dev->name, risc->cpu, (unsigned long)risc->dma); + for (i = 0; i < (risc->size >> 2); i += n) { + printk(KERN_INFO "%s: %04d: ", dev->name, i); + n = cx23885_risc_decode(le32_to_cpu(risc->cpu[i])); + for (j = 1; j < n; j++) + printk(KERN_INFO "%s: %04d: 0x%08x [ arg #%d ]\n", + dev->name, i + j, risc->cpu[i + j], j); + if (risc->cpu[i] == cpu_to_le32(RISC_JUMP)) + break; + } +} + +static void cx23885_shutdown(struct cx23885_dev *dev) +{ + /* disable RISC controller */ + cx_write(DEV_CNTRL2, 0); + + /* Disable all IR activity */ + cx_write(IR_CNTRL_REG, 0); + + /* Disable Video A/B activity */ + cx_write(VID_A_DMA_CTL, 0); + cx_write(VID_B_DMA_CTL, 0); + cx_write(VID_C_DMA_CTL, 0); + + /* Disable Audio activity */ + cx_write(AUD_INT_DMA_CTL, 0); + cx_write(AUD_EXT_DMA_CTL, 0); + + /* Disable Serial port */ + cx_write(UART_CTL, 0); + + /* Disable Interrupts */ + cx23885_irq_disable_all(dev); + cx_write(VID_A_INT_MSK, 0); + cx_write(VID_B_INT_MSK, 0); + cx_write(VID_C_INT_MSK, 0); + cx_write(AUDIO_INT_INT_MSK, 0); + cx_write(AUDIO_EXT_INT_MSK, 0); + +} + +static void cx23885_reset(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + cx23885_shutdown(dev); + + cx_write(PCI_INT_STAT, 0xffffffff); + cx_write(VID_A_INT_STAT, 0xffffffff); + cx_write(VID_B_INT_STAT, 0xffffffff); + cx_write(VID_C_INT_STAT, 0xffffffff); + cx_write(AUDIO_INT_INT_STAT, 0xffffffff); + cx_write(AUDIO_EXT_INT_STAT, 0xffffffff); + cx_write(CLK_DELAY, cx_read(CLK_DELAY) & 0x80000000); + cx_write(PAD_CTRL, 0x00500300); + + mdelay(100); + + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + 720*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH03], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH04], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH05], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH06], + 188*4, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH07], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH08], 128, 0); + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH09], 128, 0); + + cx23885_gpio_setup(dev); +} + + +static int cx23885_pci_quirks(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + + /* The cx23885 bridge has a weird bug which causes NMI to be asserted + * when DMA begins if RDR_TLCTL0 bit4 is not cleared. It does not + * occur on the cx23887 bridge. + */ + if (dev->bridge == CX23885_BRIDGE_885) + cx_clear(RDR_TLCTL0, 1 << 4); + + return 0; +} + +static int get_resources(struct cx23885_dev *dev) +{ + if (request_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0), + dev->name)) + return 0; + + printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx\n", + dev->name, (unsigned long long)pci_resource_start(dev->pci, 0)); + + return -EBUSY; +} + +static void cx23885_timeout(unsigned long data); +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); + +static int cx23885_init_tsport(struct cx23885_dev *dev, + struct cx23885_tsport *port, int portno) +{ + dprintk(1, "%s(portno=%d)\n", __func__, portno); + + /* Transport bus init dma queue - Common settings */ + port->dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ + port->ts_int_msk_val = 0x1111; /* TS port bits for RISC */ + port->vld_misc_val = 0x0; + port->hw_sop_ctrl_val = (0x47 << 16 | 188 << 4); + + spin_lock_init(&port->slock); + port->dev = dev; + port->nr = portno; + + INIT_LIST_HEAD(&port->mpegq.active); + INIT_LIST_HEAD(&port->mpegq.queued); + port->mpegq.timeout.function = cx23885_timeout; + port->mpegq.timeout.data = (unsigned long)port; + init_timer(&port->mpegq.timeout); + + mutex_init(&port->frontends.lock); + INIT_LIST_HEAD(&port->frontends.felist); + port->frontends.active_fe_id = 0; + + /* This should be hardcoded allow a single frontend + * attachment to this tsport, keeping the -dvb.c + * code clean and safe. + */ + if (!port->num_frontends) + port->num_frontends = 1; + + switch (portno) { + case 1: + port->reg_gpcnt = VID_B_GPCNT; + port->reg_gpcnt_ctl = VID_B_GPCNT_CTL; + port->reg_dma_ctl = VID_B_DMA_CTL; + port->reg_lngth = VID_B_LNGTH; + port->reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; + port->reg_gen_ctrl = VID_B_GEN_CTL; + port->reg_bd_pkt_status = VID_B_BD_PKT_STATUS; + port->reg_sop_status = VID_B_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_B_VLD_MISC; + port->reg_ts_clk_en = VID_B_TS_CLK_EN; + port->reg_src_sel = VID_B_SRC_SEL; + port->reg_ts_int_msk = VID_B_INT_MSK; + port->reg_ts_int_stat = VID_B_INT_STAT; + port->sram_chno = SRAM_CH03; /* VID_B */ + port->pci_irqmask = 0x02; /* VID_B bit1 */ + break; + case 2: + port->reg_gpcnt = VID_C_GPCNT; + port->reg_gpcnt_ctl = VID_C_GPCNT_CTL; + port->reg_dma_ctl = VID_C_DMA_CTL; + port->reg_lngth = VID_C_LNGTH; + port->reg_hw_sop_ctrl = VID_C_HW_SOP_CTL; + port->reg_gen_ctrl = VID_C_GEN_CTL; + port->reg_bd_pkt_status = VID_C_BD_PKT_STATUS; + port->reg_sop_status = VID_C_SOP_STATUS; + port->reg_fifo_ovfl_stat = VID_C_FIFO_OVFL_STAT; + port->reg_vld_misc = VID_C_VLD_MISC; + port->reg_ts_clk_en = VID_C_TS_CLK_EN; + port->reg_src_sel = 0; + port->reg_ts_int_msk = VID_C_INT_MSK; + port->reg_ts_int_stat = VID_C_INT_STAT; + port->sram_chno = SRAM_CH06; /* VID_C */ + port->pci_irqmask = 0x04; /* VID_C bit2 */ + break; + default: + BUG(); + } + + cx23885_risc_stopper(dev->pci, &port->mpegq.stopper, + port->reg_dma_ctl, port->dma_ctl_val, 0x00); + + return 0; +} + +static void cx23885_dev_checkrevision(struct cx23885_dev *dev) +{ + switch (cx_read(RDR_CFG2) & 0xff) { + case 0x00: + /* cx23885 */ + dev->hwrevision = 0xa0; + break; + case 0x01: + /* CX23885-12Z */ + dev->hwrevision = 0xa1; + break; + case 0x02: + /* CX23885-13Z/14Z */ + dev->hwrevision = 0xb0; + break; + case 0x03: + if (dev->pci->device == 0x8880) { + /* CX23888-21Z/22Z */ + dev->hwrevision = 0xc0; + } else { + /* CX23885-14Z */ + dev->hwrevision = 0xa4; + } + break; + case 0x04: + if (dev->pci->device == 0x8880) { + /* CX23888-31Z */ + dev->hwrevision = 0xd0; + } else { + /* CX23885-15Z, CX23888-31Z */ + dev->hwrevision = 0xa5; + } + break; + case 0x0e: + /* CX23887-15Z */ + dev->hwrevision = 0xc0; + break; + case 0x0f: + /* CX23887-14Z */ + dev->hwrevision = 0xb1; + break; + default: + printk(KERN_ERR "%s() New hardware revision found 0x%x\n", + __func__, dev->hwrevision); + } + if (dev->hwrevision) + printk(KERN_INFO "%s() Hardware revision = 0x%02x\n", + __func__, dev->hwrevision); + else + printk(KERN_ERR "%s() Hardware revision unknown 0x%x\n", + __func__, dev->hwrevision); +} + +/* Find the first v4l2_subdev member of the group id in hw */ +struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw) +{ + struct v4l2_subdev *result = NULL; + struct v4l2_subdev *sd; + + spin_lock(&dev->v4l2_dev.lock); + v4l2_device_for_each_subdev(sd, &dev->v4l2_dev) { + if (sd->grp_id == hw) { + result = sd; + break; + } + } + spin_unlock(&dev->v4l2_dev.lock); + return result; +} + +static int cx23885_dev_setup(struct cx23885_dev *dev) +{ + int i; + + spin_lock_init(&dev->pci_irqmask_lock); + + mutex_init(&dev->lock); + mutex_init(&dev->gpio_lock); + + atomic_inc(&dev->refcount); + + dev->nr = cx23885_devcount++; + sprintf(dev->name, "cx23885[%d]", dev->nr); + + /* Configure the internal memory */ + if (dev->pci->device == 0x8880) { + /* Could be 887 or 888, assume a default */ + dev->bridge = CX23885_BRIDGE_887; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 25000000; + dev->sram_channels = cx23887_sram_channels; + } else + if (dev->pci->device == 0x8852) { + dev->bridge = CX23885_BRIDGE_885; + /* Apply a sensible clock frequency for the PCIe bridge */ + dev->clk_freq = 28000000; + dev->sram_channels = cx23885_sram_channels; + } else + BUG(); + + dprintk(1, "%s() Memory configured for PCIe bridge type %d\n", + __func__, dev->bridge); + + /* board config */ + dev->board = UNSET; + if (card[dev->nr] < cx23885_bcount) + dev->board = card[dev->nr]; + for (i = 0; UNSET == dev->board && i < cx23885_idcount; i++) + if (dev->pci->subsystem_vendor == cx23885_subids[i].subvendor && + dev->pci->subsystem_device == cx23885_subids[i].subdevice) + dev->board = cx23885_subids[i].card; + if (UNSET == dev->board) { + dev->board = CX23885_BOARD_UNKNOWN; + cx23885_card_list(dev); + } + + /* If the user specific a clk freq override, apply it */ + if (cx23885_boards[dev->board].clk_freq > 0) + dev->clk_freq = cx23885_boards[dev->board].clk_freq; + + dev->pci_bus = dev->pci->bus->number; + dev->pci_slot = PCI_SLOT(dev->pci->devfn); + cx23885_irq_add(dev, 0x001f00); + + /* External Master 1 Bus */ + dev->i2c_bus[0].nr = 0; + dev->i2c_bus[0].dev = dev; + dev->i2c_bus[0].reg_stat = I2C1_STAT; + dev->i2c_bus[0].reg_ctrl = I2C1_CTRL; + dev->i2c_bus[0].reg_addr = I2C1_ADDR; + dev->i2c_bus[0].reg_rdata = I2C1_RDATA; + dev->i2c_bus[0].reg_wdata = I2C1_WDATA; + dev->i2c_bus[0].i2c_period = (0x9d << 24); /* 100kHz */ + + /* External Master 2 Bus */ + dev->i2c_bus[1].nr = 1; + dev->i2c_bus[1].dev = dev; + dev->i2c_bus[1].reg_stat = I2C2_STAT; + dev->i2c_bus[1].reg_ctrl = I2C2_CTRL; + dev->i2c_bus[1].reg_addr = I2C2_ADDR; + dev->i2c_bus[1].reg_rdata = I2C2_RDATA; + dev->i2c_bus[1].reg_wdata = I2C2_WDATA; + dev->i2c_bus[1].i2c_period = (0x9d << 24); /* 100kHz */ + + /* Internal Master 3 Bus */ + dev->i2c_bus[2].nr = 2; + dev->i2c_bus[2].dev = dev; + dev->i2c_bus[2].reg_stat = I2C3_STAT; + dev->i2c_bus[2].reg_ctrl = I2C3_CTRL; + dev->i2c_bus[2].reg_addr = I2C3_ADDR; + dev->i2c_bus[2].reg_rdata = I2C3_RDATA; + dev->i2c_bus[2].reg_wdata = I2C3_WDATA; + dev->i2c_bus[2].i2c_period = (0x07 << 24); /* 1.95MHz */ + + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER)) + cx23885_init_tsport(dev, &dev->ts1, 1); + + if ((cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) + cx23885_init_tsport(dev, &dev->ts2, 2); + + if (get_resources(dev) < 0) { + printk(KERN_ERR "CORE %s No more PCIe resources for " + "subsystem: %04x:%04x\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device); + + cx23885_devcount--; + return -ENODEV; + } + + /* PCIe stuff */ + dev->lmmio = ioremap(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + dev->bmmio = (u8 __iomem *)dev->lmmio; + + printk(KERN_INFO "CORE %s: subsystem: %04x:%04x, board: %s [card=%d,%s]\n", + dev->name, dev->pci->subsystem_vendor, + dev->pci->subsystem_device, cx23885_boards[dev->board].name, + dev->board, card[dev->nr] == dev->board ? + "insmod option" : "autodetected"); + + cx23885_pci_quirks(dev); + + /* Assume some sensible defaults */ + dev->tuner_type = cx23885_boards[dev->board].tuner_type; + dev->tuner_addr = cx23885_boards[dev->board].tuner_addr; + dev->tuner_bus = cx23885_boards[dev->board].tuner_bus; + dev->radio_type = cx23885_boards[dev->board].radio_type; + dev->radio_addr = cx23885_boards[dev->board].radio_addr; + + dprintk(1, "%s() tuner_type = 0x%x tuner_addr = 0x%x tuner_bus = %d\n", + __func__, dev->tuner_type, dev->tuner_addr, dev->tuner_bus); + dprintk(1, "%s() radio_type = 0x%x radio_addr = 0x%x\n", + __func__, dev->radio_type, dev->radio_addr); + + /* The cx23417 encoder has GPIO's that need to be initialised + * before DVB, so that demodulators and tuners are out of + * reset before DVB uses them. + */ + if ((cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) || + (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER)) + cx23885_mc417_init(dev); + + /* init hardware */ + cx23885_reset(dev); + + cx23885_i2c_register(&dev->i2c_bus[0]); + cx23885_i2c_register(&dev->i2c_bus[1]); + cx23885_i2c_register(&dev->i2c_bus[2]); + cx23885_card_setup(dev); + call_all(dev, core, s_power, 0); + cx23885_ir_init(dev); + + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) { + if (cx23885_video_register(dev) < 0) { + printk(KERN_ERR "%s() Failed to register analog " + "video adapters on VID_A\n", __func__); + } + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portb) + dev->ts1.num_frontends = + cx23885_boards[dev->board].num_fds_portb; + if (cx23885_dvb_register(&dev->ts1) < 0) { + printk(KERN_ERR "%s() Failed to register dvb adapters on VID_B\n", + __func__); + } + } else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_B\n", + __func__); + } + } + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + if (cx23885_boards[dev->board].num_fds_portc) + dev->ts2.num_frontends = + cx23885_boards[dev->board].num_fds_portc; + if (cx23885_dvb_register(&dev->ts2) < 0) { + printk(KERN_ERR + "%s() Failed to register dvb on VID_C\n", + __func__); + } + } else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) { + if (cx23885_417_register(dev) < 0) { + printk(KERN_ERR + "%s() Failed to register 417 on VID_C\n", + __func__); + } + } + + cx23885_dev_checkrevision(dev); + + /* disable MSI for NetUP cards, otherwise CI is not working */ + if (cx23885_boards[dev->board].ci_type > 0) + cx_clear(RDR_RDRCTL1, 1 << 8); + + switch (dev->board) { + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_TEVII_S471: + cx_clear(RDR_RDRCTL1, 1 << 8); + break; + } + + return 0; +} + +static void cx23885_dev_unregister(struct cx23885_dev *dev) +{ + release_mem_region(pci_resource_start(dev->pci, 0), + pci_resource_len(dev->pci, 0)); + + if (!atomic_dec_and_test(&dev->refcount)) + return; + + if (cx23885_boards[dev->board].porta == CX23885_ANALOG_VIDEO) + cx23885_video_unregister(dev); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts1); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + cx23885_dvb_unregister(&dev->ts2); + + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + cx23885_417_unregister(dev); + + cx23885_i2c_unregister(&dev->i2c_bus[2]); + cx23885_i2c_unregister(&dev->i2c_bus[1]); + cx23885_i2c_unregister(&dev->i2c_bus[0]); + + iounmap(dev->lmmio); +} + +static __le32 *cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, + unsigned int offset, u32 sync_line, + unsigned int bpl, unsigned int padding, + unsigned int lines, unsigned int lpi) +{ + struct scatterlist *sg; + unsigned int line, todo, sol; + + /* sync instruction */ + if (sync_line != NO_SYNC_LINE) + *(rp++) = cpu_to_le32(RISC_RESYNC | sync_line); + + /* scan lines */ + sg = sglist; + for (line = 0; line < lines; line++) { + while (offset && offset >= sg_dma_len(sg)) { + offset -= sg_dma_len(sg); + sg++; + } + + if (lpi && line > 0 && !(line % lpi)) + sol = RISC_SOL | RISC_IRQ1 | RISC_CNT_INC; + else + sol = RISC_SOL; + + if (bpl <= sg_dma_len(sg)-offset) { + /* fits into current chunk */ + *(rp++) = cpu_to_le32(RISC_WRITE|sol|RISC_EOL|bpl); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += bpl; + } else { + /* scanline needs to be split */ + todo = bpl; + *(rp++) = cpu_to_le32(RISC_WRITE|sol| + (sg_dma_len(sg)-offset)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)+offset); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= (sg_dma_len(sg)-offset); + offset = 0; + sg++; + while (todo > sg_dma_len(sg)) { + *(rp++) = cpu_to_le32(RISC_WRITE| + sg_dma_len(sg)); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + todo -= sg_dma_len(sg); + sg++; + } + *(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo); + *(rp++) = cpu_to_le32(sg_dma_address(sg)); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + offset += todo; + } + offset += padding; + } + + return rp; +} + +int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions, fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); + instructions += 2; + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + if (UNSET != top_offset) + rp = cx23885_risc_field(rp, sglist, top_offset, 0, + bpl, padding, lines, 0); + if (UNSET != bottom_offset) + rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x200, + bpl, padding, lines, 0); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +int cx23885_risc_databuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, unsigned int lpi) +{ + u32 instructions; + __le32 *rp; + int rc; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Here + there is no padding and no sync. First DMA region may be smaller + than PAGE_SIZE */ + /* Jump and write need an extra dword */ + instructions = 1 + (bpl * lines) / PAGE_SIZE + lines; + instructions += 1; + + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + rp = cx23885_risc_field(rp, sglist, 0, NO_SYNC_LINE, + bpl, 0, lines, lpi); + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + +int cx23885_risc_vbibuffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, unsigned int top_offset, + unsigned int bottom_offset, unsigned int bpl, + unsigned int padding, unsigned int lines) +{ + u32 instructions, fields; + __le32 *rp; + int rc; + + fields = 0; + if (UNSET != top_offset) + fields++; + if (UNSET != bottom_offset) + fields++; + + /* estimate risc mem: worst case is one write per page border + + one write per scan line + syncs + jump (all 2 dwords). Padding + can cause next bpl to start close to a page border. First DMA + region may be smaller than PAGE_SIZE */ + /* write and jump need and extra dword */ + instructions = fields * (1 + ((bpl + padding) * lines) + / PAGE_SIZE + lines); + instructions += 2; + rc = btcx_riscmem_alloc(pci, risc, instructions*12); + if (rc < 0) + return rc; + /* write risc instructions */ + rp = risc->cpu; + + /* Sync to line 6, so US CC line 21 will appear in line '12' + * in the userland vbi payload */ + if (UNSET != top_offset) + rp = cx23885_risc_field(rp, sglist, top_offset, 6, + bpl, padding, lines, 0); + + if (UNSET != bottom_offset) + rp = cx23885_risc_field(rp, sglist, bottom_offset, 0x207, + bpl, padding, lines, 0); + + + + /* save pointer to jmp instruction address */ + risc->jmp = rp; + BUG_ON((risc->jmp - risc->cpu + 2) * sizeof(*risc->cpu) > risc->size); + return 0; +} + + +int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value) +{ + __le32 *rp; + int rc; + + rc = btcx_riscmem_alloc(pci, risc, 4*16); + if (rc < 0) + return rc; + + /* write risc instructions */ + rp = risc->cpu; + *(rp++) = cpu_to_le32(RISC_WRITECR | RISC_IRQ2); + *(rp++) = cpu_to_le32(reg); + *(rp++) = cpu_to_le32(value); + *(rp++) = cpu_to_le32(mask); + *(rp++) = cpu_to_le32(RISC_JUMP); + *(rp++) = cpu_to_le32(risc->dma); + *(rp++) = cpu_to_le32(0); /* bits 63-32 */ + return 0; +} + +void cx23885_free_buffer(struct videobuf_queue *q, struct cx23885_buffer *buf) +{ + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + + BUG_ON(in_interrupt()); + videobuf_waiton(q, &buf->vb, 0, 0); + videobuf_dma_unmap(q->dev, dma); + videobuf_dma_free(dma); + btcx_riscmem_free(to_pci_dev(q->dev), &buf->risc); + buf->vb.state = VIDEOBUF_NEEDS_INIT; +} + +static void cx23885_tsport_reg_dump(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s() Register Dump\n", __func__); + dprintk(1, "%s() DEV_CNTRL2 0x%08X\n", __func__, + cx_read(DEV_CNTRL2)); + dprintk(1, "%s() PCI_INT_MSK 0x%08X\n", __func__, + cx23885_irq_get_mask(dev)); + dprintk(1, "%s() AUD_INT_INT_MSK 0x%08X\n", __func__, + cx_read(AUDIO_INT_INT_MSK)); + dprintk(1, "%s() AUD_INT_DMA_CTL 0x%08X\n", __func__, + cx_read(AUD_INT_DMA_CTL)); + dprintk(1, "%s() AUD_EXT_INT_MSK 0x%08X\n", __func__, + cx_read(AUDIO_EXT_INT_MSK)); + dprintk(1, "%s() AUD_EXT_DMA_CTL 0x%08X\n", __func__, + cx_read(AUD_EXT_DMA_CTL)); + dprintk(1, "%s() PAD_CTRL 0x%08X\n", __func__, + cx_read(PAD_CTRL)); + dprintk(1, "%s() ALT_PIN_OUT_SEL 0x%08X\n", __func__, + cx_read(ALT_PIN_OUT_SEL)); + dprintk(1, "%s() GPIO2 0x%08X\n", __func__, + cx_read(GPIO2)); + dprintk(1, "%s() gpcnt(0x%08X) 0x%08X\n", __func__, + port->reg_gpcnt, cx_read(port->reg_gpcnt)); + dprintk(1, "%s() gpcnt_ctl(0x%08X) 0x%08x\n", __func__, + port->reg_gpcnt_ctl, cx_read(port->reg_gpcnt_ctl)); + dprintk(1, "%s() dma_ctl(0x%08X) 0x%08x\n", __func__, + port->reg_dma_ctl, cx_read(port->reg_dma_ctl)); + if (port->reg_src_sel) + dprintk(1, "%s() src_sel(0x%08X) 0x%08x\n", __func__, + port->reg_src_sel, cx_read(port->reg_src_sel)); + dprintk(1, "%s() lngth(0x%08X) 0x%08x\n", __func__, + port->reg_lngth, cx_read(port->reg_lngth)); + dprintk(1, "%s() hw_sop_ctrl(0x%08X) 0x%08x\n", __func__, + port->reg_hw_sop_ctrl, cx_read(port->reg_hw_sop_ctrl)); + dprintk(1, "%s() gen_ctrl(0x%08X) 0x%08x\n", __func__, + port->reg_gen_ctrl, cx_read(port->reg_gen_ctrl)); + dprintk(1, "%s() bd_pkt_status(0x%08X) 0x%08x\n", __func__, + port->reg_bd_pkt_status, cx_read(port->reg_bd_pkt_status)); + dprintk(1, "%s() sop_status(0x%08X) 0x%08x\n", __func__, + port->reg_sop_status, cx_read(port->reg_sop_status)); + dprintk(1, "%s() fifo_ovfl_stat(0x%08X) 0x%08x\n", __func__, + port->reg_fifo_ovfl_stat, cx_read(port->reg_fifo_ovfl_stat)); + dprintk(1, "%s() vld_misc(0x%08X) 0x%08x\n", __func__, + port->reg_vld_misc, cx_read(port->reg_vld_misc)); + dprintk(1, "%s() ts_clk_en(0x%08X) 0x%08x\n", __func__, + port->reg_ts_clk_en, cx_read(port->reg_ts_clk_en)); + dprintk(1, "%s() ts_int_msk(0x%08X) 0x%08x\n", __func__, + port->reg_ts_int_msk, cx_read(port->reg_ts_int_msk)); +} + +static int cx23885_start_dma(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + struct cx23885_dev *dev = port->dev; + u32 reg; + + dprintk(1, "%s() w: %d, h: %d, f: %d\n", __func__, + buf->vb.width, buf->vb.height, buf->vb.field); + + /* Stop the fifo and risc engine for this port */ + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, + &dev->sram_channels[port->sram_chno], + port->ts_packet_size, buf->risc.dma); + if (debug > 5) { + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + cx23885_risc_disasm(port, &buf->risc); + } + + /* write TS length to chip */ + cx_write(port->reg_lngth, buf->vb.width); + + if ((!(cx23885_boards[dev->board].portb & CX23885_MPEG_DVB)) && + (!(cx23885_boards[dev->board].portc & CX23885_MPEG_DVB))) { + printk("%s() Unsupported .portb/c (0x%08x)/(0x%08x)\n", + __func__, + cx23885_boards[dev->board].portb, + cx23885_boards[dev->board].portc); + return -EINVAL; + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + + udelay(100); + + /* If the port supports SRC SELECT, configure it */ + if (port->reg_src_sel) + cx_write(port->reg_src_sel, port->src_sel_val); + + cx_write(port->reg_hw_sop_ctrl, port->hw_sop_ctrl_val); + cx_write(port->reg_ts_clk_en, port->ts_clk_en_val); + cx_write(port->reg_vld_misc, port->vld_misc_val); + cx_write(port->reg_gen_ctrl, port->gen_ctrl_val); + udelay(100); + + /* NOTE: this is 2 (reserved) for portb, does it matter? */ + /* reset counter to zero */ + cx_write(port->reg_gpcnt_ctl, 3); + q->count = 1; + + /* Set VIDB pins to input */ + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) { + reg = cx_read(PAD_CTRL); + reg &= ~0x3; /* Clear TS1_OE & TS1_SOP_OE */ + cx_write(PAD_CTRL, reg); + } + + /* Set VIDC pins to input */ + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) { + reg = cx_read(PAD_CTRL); + reg &= ~0x4; /* Clear TS2_SOP_OE */ + cx_write(PAD_CTRL, reg); + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + reg = reg & ~0x1; /* Clear TS1_OE */ + + /* FIXME, bit 2 writing here is questionable */ + /* set TS1_SOP_OE and TS1_OE_HI */ + reg = reg | 0xa; + cx_write(PAD_CTRL, reg); + + /* FIXME and these two registers should be documented. */ + cx_write(CLK_DELAY, cx_read(CLK_DELAY) | 0x80000011); + cx_write(ALT_PIN_OUT_SEL, 0x10100045); + } + + switch (dev->bridge) { + case CX23885_BRIDGE_885: + case CX23885_BRIDGE_887: + case CX23885_BRIDGE_888: + /* enable irqs */ + dprintk(1, "%s() enabling TS int's and DMA\n", __func__); + cx_set(port->reg_ts_int_msk, port->ts_int_msk_val); + cx_set(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_irq_add(dev, port->pci_irqmask); + cx23885_irq_enable_all(dev); + break; + default: + BUG(); + } + + cx_set(DEV_CNTRL2, (1<<5)); /* Enable RISC controller */ + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 1); + + if (debug > 4) + cx23885_tsport_reg_dump(port); + + return 0; +} + +static int cx23885_stop_dma(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + u32 reg; + + dprintk(1, "%s()\n", __func__); + + /* Stop interrupts and DMA */ + cx_clear(port->reg_ts_int_msk, port->ts_int_msk_val); + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) { + + reg = cx_read(PAD_CTRL); + + /* Set TS1_OE */ + reg = reg | 0x1; + + /* clear TS1_SOP_OE and TS1_OE_HI */ + reg = reg & ~0xa; + cx_write(PAD_CTRL, reg); + cx_write(port->reg_src_sel, 0); + cx_write(port->reg_gen_ctrl, 8); + + } + + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + cx23885_av_clk(dev, 0); + + return 0; +} + +int cx23885_restart_queue(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_buffer *buf; + + dprintk(5, "%s()\n", __func__); + if (list_empty(&q->active)) { + struct cx23885_buffer *prev; + prev = NULL; + + dprintk(5, "%s() queue is empty\n", __func__); + + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx23885_buffer, + vb.queue); + if (NULL == prev) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_dma(port, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(5, "[%p/%d] restart_queue - f/active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_del(&buf->vb.queue); + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(5, "[%p/%d] restart_queue - m/active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } + return 0; + } + + buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_dma(port, q, buf); + list_for_each_entry(buf, &q->active, vb.queue) + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + BUFFER_TIMEOUT); + return 0; +} + +/* ------------------------------------------------------------------ */ + +int cx23885_buf_prepare(struct videobuf_queue *q, struct cx23885_tsport *port, + struct cx23885_buffer *buf, enum v4l2_field field) +{ + struct cx23885_dev *dev = port->dev; + int size = port->ts_packet_size * port->ts_packet_count; + int rc; + + dprintk(1, "%s: %p\n", __func__, buf); + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = port->ts_packet_size; + buf->vb.height = port->ts_packet_count; + buf->vb.size = size; + buf->vb.field = field /*V4L2_FIELD_TOP*/; + + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + cx23885_risc_databuffer(dev->pci, &buf->risc, + videobuf_to_dma(&buf->vb)->sglist, + buf->vb.width, buf->vb.height, 0); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +void cx23885_buf_queue(struct cx23885_tsport *port, struct cx23885_buffer *buf) +{ + struct cx23885_buffer *prev; + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *cx88q = &port->mpegq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(cx88q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (list_empty(&cx88q->active)) { + dprintk(1, "queue is empty - first active\n"); + list_add_tail(&buf->vb.queue, &cx88q->active); + cx23885_start_dma(port, cx88q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + mod_timer(&cx88q->timeout, jiffies + BUFFER_TIMEOUT); + dprintk(1, "[%p/%d] %s - first active\n", + buf, buf->vb.i, __func__); + } else { + dprintk(1, "queue is not empty - append to active\n"); + prev = list_entry(cx88q->active.prev, struct cx23885_buffer, + vb.queue); + list_add_tail(&buf->vb.queue, &cx88q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = cx88q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* 64 bit bits 63-32 */ + dprintk(1, "[%p/%d] %s - append to active\n", + buf, buf->vb.i, __func__); + } +} + +/* ----------------------------------------------------------- */ + +static void do_cancel_buffers(struct cx23885_tsport *port, char *reason, + int restart) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *q = &port->mpegq; + struct cx23885_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&port->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + dprintk(1, "[%p/%d] %s - dma=0x%08lx\n", + buf, buf->vb.i, reason, (unsigned long)buf->risc.dma); + } + if (restart) { + dprintk(1, "restarting queue\n"); + cx23885_restart_queue(port, q); + } + spin_unlock_irqrestore(&port->slock, flags); +} + +void cx23885_cancel_buffers(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_dmaqueue *q = &port->mpegq; + + dprintk(1, "%s()\n", __func__); + del_timer_sync(&q->timeout); + cx23885_stop_dma(port); + do_cancel_buffers(port, "cancel", 0); +} + +static void cx23885_timeout(unsigned long data) +{ + struct cx23885_tsport *port = (struct cx23885_tsport *)data; + struct cx23885_dev *dev = port->dev; + + dprintk(1, "%s()\n", __func__); + + if (debug > 5) + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + + cx23885_stop_dma(port); + do_cancel_buffers(port, "timeout", 1); +} + +int cx23885_irq_417(struct cx23885_dev *dev, u32 status) +{ + /* FIXME: port1 assumption here. */ + struct cx23885_tsport *port = &dev->ts1; + int count = 0; + int handled = 0; + + if (status == 0) + return handled; + + count = cx_read(port->reg_gpcnt); + dprintk(7, "status: 0x%08x mask: 0x%08x count: 0x%x\n", + status, cx_read(port->reg_ts_int_msk), count); + + if ((status & VID_B_MSK_BAD_PKT) || + (status & VID_B_MSK_OPC_ERR) || + (status & VID_B_MSK_VBI_OPC_ERR) || + (status & VID_B_MSK_SYNC) || + (status & VID_B_MSK_VBI_SYNC) || + (status & VID_B_MSK_OF) || + (status & VID_B_MSK_VBI_OF)) { + printk(KERN_ERR "%s: V4L mpeg risc op code error, status " + "= 0x%x\n", dev->name, status); + if (status & VID_B_MSK_BAD_PKT) + dprintk(1, " VID_B_MSK_BAD_PKT\n"); + if (status & VID_B_MSK_OPC_ERR) + dprintk(1, " VID_B_MSK_OPC_ERR\n"); + if (status & VID_B_MSK_VBI_OPC_ERR) + dprintk(1, " VID_B_MSK_VBI_OPC_ERR\n"); + if (status & VID_B_MSK_SYNC) + dprintk(1, " VID_B_MSK_SYNC\n"); + if (status & VID_B_MSK_VBI_SYNC) + dprintk(1, " VID_B_MSK_VBI_SYNC\n"); + if (status & VID_B_MSK_OF) + dprintk(1, " VID_B_MSK_OF\n"); + if (status & VID_B_MSK_VBI_OF) + dprintk(1, " VID_B_MSK_VBI_OF\n"); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + cx23885_417_check_encoder(dev); + } else if (status & VID_B_MSK_RISCI1) { + dprintk(7, " VID_B_MSK_RISCI1\n"); + spin_lock(&port->slock); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + } else if (status & VID_B_MSK_RISCI2) { + dprintk(7, " VID_B_MSK_RISCI2\n"); + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + +static int cx23885_irq_ts(struct cx23885_tsport *port, u32 status) +{ + struct cx23885_dev *dev = port->dev; + int handled = 0; + u32 count; + + if ((status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_BAD_PKT) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) { + + if (status & VID_BC_MSK_OPC_ERR) + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + + if (status & VID_BC_MSK_BAD_PKT) + dprintk(7, " (VID_BC_MSK_BAD_PKT 0x%08x)\n", + VID_BC_MSK_BAD_PKT); + + if (status & VID_BC_MSK_SYNC) + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x)\n", + VID_BC_MSK_SYNC); + + if (status & VID_BC_MSK_OF) + dprintk(7, " (VID_BC_MSK_OF 0x%08x)\n", + VID_BC_MSK_OF); + + printk(KERN_ERR "%s: mpeg risc op code error\n", dev->name); + + cx_clear(port->reg_dma_ctl, port->dma_ctl_val); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[port->sram_chno]); + + } else if (status & VID_BC_MSK_RISCI1) { + + dprintk(7, " (RISCI1 0x%08x)\n", VID_BC_MSK_RISCI1); + + spin_lock(&port->slock); + count = cx_read(port->reg_gpcnt); + cx23885_wakeup(port, &port->mpegq, count); + spin_unlock(&port->slock); + + } else if (status & VID_BC_MSK_RISCI2) { + + dprintk(7, " (RISCI2 0x%08x)\n", VID_BC_MSK_RISCI2); + + spin_lock(&port->slock); + cx23885_restart_queue(port, &port->mpegq); + spin_unlock(&port->slock); + + } + if (status) { + cx_write(port->reg_ts_int_stat, status); + handled = 1; + } + + return handled; +} + +static irqreturn_t cx23885_irq(int irq, void *dev_id) +{ + struct cx23885_dev *dev = dev_id; + struct cx23885_tsport *ts1 = &dev->ts1; + struct cx23885_tsport *ts2 = &dev->ts2; + u32 pci_status, pci_mask; + u32 vida_status, vida_mask; + u32 audint_status, audint_mask; + u32 ts1_status, ts1_mask; + u32 ts2_status, ts2_mask; + int vida_count = 0, ts1_count = 0, ts2_count = 0, handled = 0; + int audint_count = 0; + bool subdev_handled; + + pci_status = cx_read(PCI_INT_STAT); + pci_mask = cx23885_irq_get_mask(dev); + vida_status = cx_read(VID_A_INT_STAT); + vida_mask = cx_read(VID_A_INT_MSK); + audint_status = cx_read(AUDIO_INT_INT_STAT); + audint_mask = cx_read(AUDIO_INT_INT_MSK); + ts1_status = cx_read(VID_B_INT_STAT); + ts1_mask = cx_read(VID_B_INT_MSK); + ts2_status = cx_read(VID_C_INT_STAT); + ts2_mask = cx_read(VID_C_INT_MSK); + + if ((pci_status == 0) && (ts2_status == 0) && (ts1_status == 0)) + goto out; + + vida_count = cx_read(VID_A_GPCNT); + audint_count = cx_read(AUD_INT_A_GPCNT); + ts1_count = cx_read(ts1->reg_gpcnt); + ts2_count = cx_read(ts2->reg_gpcnt); + dprintk(7, "pci_status: 0x%08x pci_mask: 0x%08x\n", + pci_status, pci_mask); + dprintk(7, "vida_status: 0x%08x vida_mask: 0x%08x count: 0x%x\n", + vida_status, vida_mask, vida_count); + dprintk(7, "audint_status: 0x%08x audint_mask: 0x%08x count: 0x%x\n", + audint_status, audint_mask, audint_count); + dprintk(7, "ts1_status: 0x%08x ts1_mask: 0x%08x count: 0x%x\n", + ts1_status, ts1_mask, ts1_count); + dprintk(7, "ts2_status: 0x%08x ts2_mask: 0x%08x count: 0x%x\n", + ts2_status, ts2_mask, ts2_count); + + if (pci_status & (PCI_MSK_RISC_RD | PCI_MSK_RISC_WR | + PCI_MSK_AL_RD | PCI_MSK_AL_WR | PCI_MSK_APB_DMA | + PCI_MSK_VID_C | PCI_MSK_VID_B | PCI_MSK_VID_A | + PCI_MSK_AUD_INT | PCI_MSK_AUD_EXT | + PCI_MSK_GPIO0 | PCI_MSK_GPIO1 | + PCI_MSK_AV_CORE | PCI_MSK_IR)) { + + if (pci_status & PCI_MSK_RISC_RD) + dprintk(7, " (PCI_MSK_RISC_RD 0x%08x)\n", + PCI_MSK_RISC_RD); + + if (pci_status & PCI_MSK_RISC_WR) + dprintk(7, " (PCI_MSK_RISC_WR 0x%08x)\n", + PCI_MSK_RISC_WR); + + if (pci_status & PCI_MSK_AL_RD) + dprintk(7, " (PCI_MSK_AL_RD 0x%08x)\n", + PCI_MSK_AL_RD); + + if (pci_status & PCI_MSK_AL_WR) + dprintk(7, " (PCI_MSK_AL_WR 0x%08x)\n", + PCI_MSK_AL_WR); + + if (pci_status & PCI_MSK_APB_DMA) + dprintk(7, " (PCI_MSK_APB_DMA 0x%08x)\n", + PCI_MSK_APB_DMA); + + if (pci_status & PCI_MSK_VID_C) + dprintk(7, " (PCI_MSK_VID_C 0x%08x)\n", + PCI_MSK_VID_C); + + if (pci_status & PCI_MSK_VID_B) + dprintk(7, " (PCI_MSK_VID_B 0x%08x)\n", + PCI_MSK_VID_B); + + if (pci_status & PCI_MSK_VID_A) + dprintk(7, " (PCI_MSK_VID_A 0x%08x)\n", + PCI_MSK_VID_A); + + if (pci_status & PCI_MSK_AUD_INT) + dprintk(7, " (PCI_MSK_AUD_INT 0x%08x)\n", + PCI_MSK_AUD_INT); + + if (pci_status & PCI_MSK_AUD_EXT) + dprintk(7, " (PCI_MSK_AUD_EXT 0x%08x)\n", + PCI_MSK_AUD_EXT); + + if (pci_status & PCI_MSK_GPIO0) + dprintk(7, " (PCI_MSK_GPIO0 0x%08x)\n", + PCI_MSK_GPIO0); + + if (pci_status & PCI_MSK_GPIO1) + dprintk(7, " (PCI_MSK_GPIO1 0x%08x)\n", + PCI_MSK_GPIO1); + + if (pci_status & PCI_MSK_AV_CORE) + dprintk(7, " (PCI_MSK_AV_CORE 0x%08x)\n", + PCI_MSK_AV_CORE); + + if (pci_status & PCI_MSK_IR) + dprintk(7, " (PCI_MSK_IR 0x%08x)\n", + PCI_MSK_IR); + } + + if (cx23885_boards[dev->board].ci_type == 1 && + (pci_status & (PCI_MSK_GPIO1 | PCI_MSK_GPIO0))) + handled += netup_ci_slot_status(dev, pci_status); + + if (cx23885_boards[dev->board].ci_type == 2 && + (pci_status & PCI_MSK_GPIO0)) + handled += altera_ci_irq(dev); + + if (ts1_status) { + if (cx23885_boards[dev->board].portb == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts1, ts1_status); + else + if (cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts1_status); + } + + if (ts2_status) { + if (cx23885_boards[dev->board].portc == CX23885_MPEG_DVB) + handled += cx23885_irq_ts(ts2, ts2_status); + else + if (cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER) + handled += cx23885_irq_417(dev, ts2_status); + } + + if (vida_status) + handled += cx23885_video_irq(dev, vida_status); + + if (audint_status) + handled += cx23885_audio_irq(dev, audint_status, audint_mask); + + if (pci_status & PCI_MSK_IR) { + subdev_handled = false; + v4l2_subdev_call(dev->sd_ir, core, interrupt_service_routine, + pci_status, &subdev_handled); + if (subdev_handled) + handled++; + } + + if ((pci_status & pci_mask) & PCI_MSK_AV_CORE) { + cx23885_irq_disable(dev, PCI_MSK_AV_CORE); + if (!schedule_work(&dev->cx25840_work)) + printk(KERN_ERR "%s: failed to set up deferred work for" + " AV Core/IR interrupt. Interrupt is disabled" + " and won't be re-enabled\n", dev->name); + handled++; + } + + if (handled) + cx_write(PCI_INT_STAT, pci_status); +out: + return IRQ_RETVAL(handled); +} + +static void cx23885_v4l2_dev_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + struct cx23885_dev *dev; + + if (sd == NULL) + return; + + dev = to_cx23885(sd->v4l2_dev); + + switch (notification) { + case V4L2_SUBDEV_IR_RX_NOTIFY: /* Possibly called in an IRQ context */ + if (sd == dev->sd_ir) + cx23885_ir_rx_v4l2_dev_notify(sd, *(u32 *)arg); + break; + case V4L2_SUBDEV_IR_TX_NOTIFY: /* Possibly called in an IRQ context */ + if (sd == dev->sd_ir) + cx23885_ir_tx_v4l2_dev_notify(sd, *(u32 *)arg); + break; + } +} + +static void cx23885_v4l2_dev_notify_init(struct cx23885_dev *dev) +{ + INIT_WORK(&dev->cx25840_work, cx23885_av_work_handler); + INIT_WORK(&dev->ir_rx_work, cx23885_ir_rx_work_handler); + INIT_WORK(&dev->ir_tx_work, cx23885_ir_tx_work_handler); + dev->v4l2_dev.notify = cx23885_v4l2_dev_notify; +} + +static inline int encoder_on_portb(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portb == CX23885_MPEG_ENCODER; +} + +static inline int encoder_on_portc(struct cx23885_dev *dev) +{ + return cx23885_boards[dev->board].portc == CX23885_MPEG_ENCODER; +} + +/* Mask represents 32 different GPIOs, GPIO's are split into multiple + * registers depending on the board configuration (and whether the + * 417 encoder (wi it's own GPIO's) are present. Each GPIO bit will + * be pushed into the correct hardware register, regardless of the + * physical location. Certain registers are shared so we sanity check + * and report errors if we think we're tampering with a GPIo that might + * be assigned to the encoder (and used for the host bus). + * + * GPIO 2 thru 0 - On the cx23885 bridge + * GPIO 18 thru 3 - On the cx23417 host bus interface + * GPIO 23 thru 19 - On the cx25840 a/v core + */ +void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x7) + cx_set(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Setting GPIO on encoder ports\n", + dev->name); + cx_set(MC417_RWD, (mask & 0x0007fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x00000007) + cx_clear(GP0_IO, mask & 0x7); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Clearing GPIO moving on encoder ports\n", + dev->name); + cx_clear(MC417_RWD, (mask & 0x7fff8) >> 3); + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); +} + +u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask) +{ + if (mask & 0x00000007) + return (cx_read(GP0_IO) >> 8) & mask & 0x7; + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Reading GPIO moving on encoder ports\n", + dev->name); + return (cx_read(MC417_RWD) & ((mask & 0x7fff8) >> 3)) << 3; + } + + /* TODO: 23-19 */ + if (mask & 0x00f80000) + printk(KERN_INFO "%s: Unsupported\n", dev->name); + + return 0; +} + +void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput) +{ + if ((mask & 0x00000007) && asoutput) + cx_set(GP0_IO, (mask & 0x7) << 16); + else if ((mask & 0x00000007) && !asoutput) + cx_clear(GP0_IO, (mask & 0x7) << 16); + + if (mask & 0x0007fff8) { + if (encoder_on_portb(dev) || encoder_on_portc(dev)) + printk(KERN_ERR + "%s: Enabling GPIO on encoder ports\n", + dev->name); + } + + /* MC417_OEN is active low for output, write 1 for an input */ + if ((mask & 0x0007fff8) && asoutput) + cx_clear(MC417_OEN, (mask & 0x7fff8) >> 3); + + else if ((mask & 0x0007fff8) && !asoutput) + cx_set(MC417_OEN, (mask & 0x7fff8) >> 3); + + /* TODO: 23-19 */ +} + +static int __devinit cx23885_initdev(struct pci_dev *pci_dev, + const struct pci_device_id *pci_id) +{ + struct cx23885_dev *dev; + int err; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (NULL == dev) + return -ENOMEM; + + err = v4l2_device_register(&pci_dev->dev, &dev->v4l2_dev); + if (err < 0) + goto fail_free; + + /* Prepare to handle notifications from subdevices */ + cx23885_v4l2_dev_notify_init(dev); + + /* pci init */ + dev->pci = pci_dev; + if (pci_enable_device(pci_dev)) { + err = -EIO; + goto fail_unreg; + } + + if (cx23885_dev_setup(dev) < 0) { + err = -EINVAL; + goto fail_unreg; + } + + /* print pci info */ + dev->pci_rev = pci_dev->revision; + pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat); + printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, " + "latency: %d, mmio: 0x%llx\n", dev->name, + pci_name(pci_dev), dev->pci_rev, pci_dev->irq, + dev->pci_lat, + (unsigned long long)pci_resource_start(pci_dev, 0)); + + pci_set_master(pci_dev); + if (!pci_dma_supported(pci_dev, 0xffffffff)) { + printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); + err = -EIO; + goto fail_irq; + } + + err = request_irq(pci_dev->irq, cx23885_irq, + IRQF_SHARED | IRQF_DISABLED, dev->name, dev); + if (err < 0) { + printk(KERN_ERR "%s: can't get IRQ %d\n", + dev->name, pci_dev->irq); + goto fail_irq; + } + + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO1 | PCI_MSK_GPIO0); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + cx23885_irq_add_enable(dev, PCI_MSK_GPIO0); + break; + } + + /* + * The CX2388[58] IR controller can start firing interrupts when + * enabled, so these have to take place after the cx23885_irq() handler + * is hooked up by the call to request_irq() above. + */ + cx23885_ir_pci_int_enable(dev); + cx23885_input_init(dev); + + return 0; + +fail_irq: + cx23885_dev_unregister(dev); +fail_unreg: + v4l2_device_unregister(&dev->v4l2_dev); +fail_free: + kfree(dev); + return err; +} + +static void __devexit cx23885_finidev(struct pci_dev *pci_dev) +{ + struct v4l2_device *v4l2_dev = pci_get_drvdata(pci_dev); + struct cx23885_dev *dev = to_cx23885(v4l2_dev); + + cx23885_input_fini(dev); + cx23885_ir_fini(dev); + + cx23885_shutdown(dev); + + pci_disable_device(pci_dev); + + /* unregister stuff */ + free_irq(pci_dev->irq, dev); + + cx23885_dev_unregister(dev); + v4l2_device_unregister(v4l2_dev); + kfree(dev); +} + +static struct pci_device_id cx23885_pci_tbl[] = { + { + /* CX23885 */ + .vendor = 0x14f1, + .device = 0x8852, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* CX23887 Rev 2 */ + .vendor = 0x14f1, + .device = 0x8880, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* --- end of list --- */ + } +}; +MODULE_DEVICE_TABLE(pci, cx23885_pci_tbl); + +static struct pci_driver cx23885_pci_driver = { + .name = "cx23885", + .id_table = cx23885_pci_tbl, + .probe = cx23885_initdev, + .remove = __devexit_p(cx23885_finidev), + /* TODO */ + .suspend = NULL, + .resume = NULL, +}; + +static int __init cx23885_init(void) +{ + printk(KERN_INFO "cx23885 driver version %s loaded\n", + CX23885_VERSION); + return pci_register_driver(&cx23885_pci_driver); +} + +static void __exit cx23885_fini(void) +{ + pci_unregister_driver(&cx23885_pci_driver); +} + +module_init(cx23885_init); +module_exit(cx23885_fini); diff --git a/drivers/media/pci/cx23885/cx23885-dvb.c b/drivers/media/pci/cx23885/cx23885-dvb.c new file mode 100644 index 00000000000..f3202a52d53 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-dvb.c @@ -0,0 +1,1356 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/kthread.h> +#include <linux/file.h> +#include <linux/suspend.h> + +#include "cx23885.h" +#include <media/v4l2-common.h> + +#include "dvb_ca_en50221.h" +#include "s5h1409.h" +#include "s5h1411.h" +#include "mt2131.h" +#include "tda8290.h" +#include "tda18271.h" +#include "lgdt330x.h" +#include "xc4000.h" +#include "xc5000.h" +#include "max2165.h" +#include "tda10048.h" +#include "tuner-xc2028.h" +#include "tuner-simple.h" +#include "dib7000p.h" +#include "dibx000_common.h" +#include "zl10353.h" +#include "stv0900.h" +#include "stv0900_reg.h" +#include "stv6110.h" +#include "lnbh24.h" +#include "cx24116.h" +#include "cimax2.h" +#include "lgs8gxx.h" +#include "netup-eeprom.h" +#include "netup-init.h" +#include "lgdt3305.h" +#include "atbm8830.h" +#include "ds3000.h" +#include "cx23885-f300.h" +#include "altera-ci.h" +#include "stv0367.h" +#include "drxk.h" +#include "mt2063.h" + +static unsigned int debug; + +#define dprintk(level, fmt, arg...)\ + do { if (debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------ */ + +static unsigned int alt_tuner; +module_param(alt_tuner, int, 0644); +MODULE_PARM_DESC(alt_tuner, "Enable alternate tuner configuration"); + +DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); + +/* ------------------------------------------------------------------ */ + +static int dvb_buf_setup(struct videobuf_queue *q, + unsigned int *count, unsigned int *size) +{ + struct cx23885_tsport *port = q->priv_data; + + port->ts_packet_size = 188 * 4; + port->ts_packet_count = 32; + + *size = port->ts_packet_size * port->ts_packet_count; + *count = 32; + return 0; +} + +static int dvb_buf_prepare(struct videobuf_queue *q, + struct videobuf_buffer *vb, enum v4l2_field field) +{ + struct cx23885_tsport *port = q->priv_data; + return cx23885_buf_prepare(q, port, (struct cx23885_buffer *)vb, field); +} + +static void dvb_buf_queue(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx23885_tsport *port = q->priv_data; + cx23885_buf_queue(port, (struct cx23885_buffer *)vb); +} + +static void dvb_buf_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + cx23885_free_buffer(q, (struct cx23885_buffer *)vb); +} + +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe); + +static void cx23885_dvb_gate_ctrl(struct cx23885_tsport *port, int open) +{ + struct videobuf_dvb_frontends *f; + struct videobuf_dvb_frontend *fe; + + f = &port->frontends; + + if (f->gate <= 1) /* undefined or fe0 */ + fe = videobuf_dvb_get_frontend(f, 1); + else + fe = videobuf_dvb_get_frontend(f, f->gate); + + if (fe && fe->dvb.frontend && fe->dvb.frontend->ops.i2c_gate_ctrl) + fe->dvb.frontend->ops.i2c_gate_ctrl(fe->dvb.frontend, open); + + /* + * FIXME: Improve this path to avoid calling the + * cx23885_dvb_set_frontend() every time it passes here. + */ + cx23885_dvb_set_frontend(fe->dvb.frontend); +} + +static struct videobuf_queue_ops dvb_qops = { + .buf_setup = dvb_buf_setup, + .buf_prepare = dvb_buf_prepare, + .buf_queue = dvb_buf_queue, + .buf_release = dvb_buf_release, +}; + +static struct s5h1409_config hauppauge_generic_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct tda10048_config hauppauge_hvr1200_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3800, + .dtv8_if_freq_khz = TDA10048_IF_4300, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct tda10048_config hauppauge_hvr1210_config = { + .demod_address = 0x10 >> 1, + .output_mode = TDA10048_SERIAL_OUTPUT, + .fwbulkwritelen = TDA10048_BULKWRITE_200, + .inversion = TDA10048_INVERSION_ON, + .dtv6_if_freq_khz = TDA10048_IF_3300, + .dtv7_if_freq_khz = TDA10048_IF_3500, + .dtv8_if_freq_khz = TDA10048_IF_4000, + .clk_freq_khz = TDA10048_CLK_16000, +}; + +static struct s5h1409_config hauppauge_ezqam_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 4000, + .inversion = S5H1409_INVERSION_ON, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config hauppauge_hvr1800lp_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config hauppauge_hvr1500_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_OFF, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct mt2131_config hauppauge_generic_tunerconfig = { + 0x61 +}; + +static struct lgdt330x_config fusionhdtv_5_express = { + .demod_address = 0x0e, + .demod_chip = LGDT3303, + .serial_mpeg = 0x40, +}; + +static struct s5h1409_config hauppauge_hvr1500q_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1409_config dvico_s5h1409_config = { + .demod_address = 0x32 >> 1, + .output_mode = S5H1409_SERIAL_OUTPUT, + .gpio = S5H1409_GPIO_ON, + .qam_if = 44000, + .inversion = S5H1409_INVERSION_OFF, + .status_mode = S5H1409_DEMODLOCKING, + .mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1411_config dvico_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_ON, + .qam_if = S5H1411_IF_44000, + .vsb_if = S5H1411_IF_44000, + .inversion = S5H1411_INVERSION_OFF, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct s5h1411_config hcw_s5h1411_config = { + .output_mode = S5H1411_SERIAL_OUTPUT, + .gpio = S5H1411_GPIO_OFF, + .vsb_if = S5H1411_IF_44000, + .qam_if = S5H1411_IF_4000, + .inversion = S5H1411_INVERSION_ON, + .status_mode = S5H1411_DEMODLOCKING, + .mpeg_timing = S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, +}; + +static struct xc5000_config hauppauge_hvr1500q_tunerconfig = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + +static struct xc5000_config dvico_xc5000_tunerconfig = { + .i2c_address = 0x64, + .if_khz = 5380, +}; + +static struct tda829x_config tda829x_no_probe = { + .probe_tuner = TDA829X_DONT_PROBE, +}; + +static struct tda18271_std_map hauppauge_tda18271_std_map = { + .atsc_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, + .if_lvl = 6, .rfagc_top = 0x37 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, + .if_lvl = 6, .rfagc_top = 0x37 }, +}; + +static struct tda18271_std_map hauppauge_hvr1200_tda18271_std_map = { + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, +}; + +static struct tda18271_config hauppauge_tda18271_config = { + .std_map = &hauppauge_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_config hauppauge_hvr1200_tuner_config = { + .std_map = &hauppauge_hvr1200_tda18271_std_map, + .gate = TDA18271_GATE_ANALOG, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_config hauppauge_hvr1210_tuner_config = { + .gate = TDA18271_GATE_DIGITAL, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct tda18271_std_map hauppauge_hvr127x_std_map = { + .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x58 }, + .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x58 }, +}; + +static struct tda18271_config hauppauge_hvr127x_config = { + .std_map = &hauppauge_hvr127x_std_map, + .output_opt = TDA18271_OUTPUT_LT_OFF, +}; + +static struct lgdt3305_config hauppauge_lgdt3305_config = { + .i2c_addr = 0x0e, + .mpeg_mode = LGDT3305_MPEG_SERIAL, + .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, + .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, + .deny_i2c_rptr = 1, + .spectral_inversion = 1, + .qam_if_khz = 4000, + .vsb_if_khz = 3250, +}; + +static struct dibx000_agc_config xc3028_agc_config = { + BAND_VHF | BAND_UHF, /* band_caps */ + + /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0, P_agc_freq_pwm_div=0, + * P_agc_inv_pwm1=0, P_agc_inv_pwm2=0, + * P_agc_inh_dc_rv_est=0, P_agc_time_est=3, P_agc_freeze=0, + * P_agc_nb_est=2, P_agc_write=0 + */ + (0 << 15) | (0 << 14) | (0 << 11) | (0 << 10) | (0 << 9) | (0 << 8) | + (3 << 5) | (0 << 4) | (2 << 1) | (0 << 0), /* setup */ + + 712, /* inv_gain */ + 21, /* time_stabiliz */ + + 0, /* alpha_level */ + 118, /* thlock */ + + 0, /* wbd_inv */ + 2867, /* wbd_ref */ + 0, /* wbd_sel */ + 2, /* wbd_alpha */ + + 0, /* agc1_max */ + 0, /* agc1_min */ + 39718, /* agc2_max */ + 9930, /* agc2_min */ + 0, /* agc1_pt1 */ + 0, /* agc1_pt2 */ + 0, /* agc1_pt3 */ + 0, /* agc1_slope1 */ + 0, /* agc1_slope2 */ + 0, /* agc2_pt1 */ + 128, /* agc2_pt2 */ + 29, /* agc2_slope1 */ + 29, /* agc2_slope2 */ + + 17, /* alpha_mant */ + 27, /* alpha_exp */ + 23, /* beta_mant */ + 51, /* beta_exp */ + + 1, /* perform_agc_softsplit */ +}; + +/* PLL Configuration for COFDM BW_MHz = 8.000000 + * With external clock = 30.000000 */ +static struct dibx000_bandwidth_config xc3028_bw_config = { + 60000, /* internal */ + 30000, /* sampling */ + 1, /* pll_cfg: prediv */ + 8, /* pll_cfg: ratio */ + 3, /* pll_cfg: range */ + 1, /* pll_cfg: reset */ + 0, /* pll_cfg: bypass */ + 0, /* misc: refdiv */ + 0, /* misc: bypclk_div */ + 1, /* misc: IO_CLK_en_core */ + 1, /* misc: ADClkSrc */ + 0, /* misc: modulo */ + (3 << 14) | (1 << 12) | (524 << 0), /* sad_cfg: refsel, sel, freq_15k */ + (1 << 25) | 5816102, /* ifreq = 5.200000 MHz */ + 20452225, /* timf */ + 30000000 /* xtal_hz */ +}; + +static struct dib7000p_config hauppauge_hvr1400_dib7000_config = { + .output_mpeg2_in_188_bytes = 1, + .hostbus_diversity = 1, + .tuner_is_baseband = 0, + .update_lna = NULL, + + .agc_config_count = 1, + .agc = &xc3028_agc_config, + .bw = &xc3028_bw_config, + + .gpio_dir = DIB7000P_GPIO_DEFAULT_DIRECTIONS, + .gpio_val = DIB7000P_GPIO_DEFAULT_VALUES, + .gpio_pwm_pos = DIB7000P_GPIO_DEFAULT_PWM_POS, + + .pwm_freq_div = 0, + .agc_control = NULL, + .spur_protect = 0, + + .output_mode = OUTMODE_MPEG2_SERIAL, +}; + +static struct zl10353_config dvico_fusionhdtv_xc3028 = { + .demod_address = 0x0f, + .if2 = 45600, + .no_tuner = 1, + .disable_i2c_gate_ctrl = 1, +}; + +static struct stv0900_reg stv0900_ts_regs[] = { + { R0900_TSGENERAL, 0x00 }, + { R0900_P1_TSSPEED, 0x40 }, + { R0900_P2_TSSPEED, 0x40 }, + { R0900_P1_TSCFGM, 0xc0 }, + { R0900_P2_TSCFGM, 0xc0 }, + { R0900_P1_TSCFGH, 0xe0 }, + { R0900_P2_TSCFGH, 0xe0 }, + { R0900_P1_TSCFGL, 0x20 }, + { R0900_P2_TSCFGL, 0x20 }, + { 0xffff, 0xff }, /* terminate */ +}; + +static struct stv0900_config netup_stv0900_config = { + .demod_address = 0x68, + .demod_mode = 1, /* dual */ + .xtal = 8000000, + .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */ + .diseqc_mode = 2,/* 2/3 PWM */ + .ts_config_regs = stv0900_ts_regs, + .tun1_maddress = 0,/* 0x60 */ + .tun2_maddress = 3,/* 0x63 */ + .tun1_adc = 1,/* 1 Vpp */ + .tun2_adc = 1,/* 1 Vpp */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_a = { + .i2c_address = 0x60, + .mclk = 16000000, + .clk_div = 1, + .gain = 8, /* +16 dB - maximum gain */ +}; + +static struct stv6110_config netup_stv6110_tunerconfig_b = { + .i2c_address = 0x63, + .mclk = 16000000, + .clk_div = 1, + .gain = 8, /* +16 dB - maximum gain */ +}; + +static struct cx24116_config tbs_cx24116_config = { + .demod_address = 0x55, +}; + +static struct ds3000_config tevii_ds3000_config = { + .demod_address = 0x68, +}; + +static struct cx24116_config dvbworld_cx24116_config = { + .demod_address = 0x05, +}; + +static struct lgs8gxx_config mygica_x8506_lgs8gl5_config = { + .prod = LGS8GXX_PROD_LGS8GL5, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 5380, /* 5.38 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 0, + .if_neg_edge = 0, +}; + +static struct xc5000_config mygica_x8506_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 5380, +}; + +static int cx23885_dvb_set_frontend(struct dvb_frontend *fe) +{ + struct dtv_frontend_properties *p = &fe->dtv_property_cache; + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1275: + switch (p->modulation) { + case VSB_8: + cx23885_gpio_clear(dev, GPIO_5); + break; + case QAM_64: + case QAM_256: + default: + cx23885_gpio_set(dev, GPIO_5); + break; + } + break; + case CX23885_BOARD_MYGICA_X8506: + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + /* Select Digital TV */ + cx23885_gpio_set(dev, GPIO_0); + break; + } + return 0; +} + +static struct lgs8gxx_config magicpro_prohdtve2_lgs8g75_config = { + .prod = LGS8GXX_PROD_LGS8G75, + .demod_address = 0x19, + .serial_ts = 0, + .ts_clk_pol = 1, + .ts_clk_gated = 1, + .if_clk_freq = 30400, /* 30.4 MHz */ + .if_freq = 6500, /* 6.50 MHz */ + .if_neg_center = 1, + .ext_adc = 0, + .adc_signed = 1, + .adc_vpp = 2, /* 1.6 Vpp */ + .if_neg_edge = 1, +}; + +static struct xc5000_config magicpro_prohdtve2_xc5000_config = { + .i2c_address = 0x61, + .if_khz = 6500, +}; + +static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = { + .prod = ATBM8830_PROD_8830, + .demod_address = 0x44, + .serial_ts = 0, + .ts_sampling_edge = 1, + .ts_clk_gated = 0, + .osc_clk_freq = 30400, /* in kHz */ + .if_freq = 0, /* zero IF */ + .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, +}; + +static struct max2165_config mygic_x8558pro_max2165_cfg1 = { + .i2c_address = 0x60, + .osc_clk = 20 +}; + +static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = { + .prod = ATBM8830_PROD_8830, + .demod_address = 0x44, + .serial_ts = 1, + .ts_sampling_edge = 1, + .ts_clk_gated = 0, + .osc_clk_freq = 30400, /* in kHz */ + .if_freq = 0, /* zero IF */ + .zif_swap_iq = 1, + .agc_min = 0x2E, + .agc_max = 0xFF, + .agc_hold_loop = 0, +}; + +static struct max2165_config mygic_x8558pro_max2165_cfg2 = { + .i2c_address = 0x60, + .osc_clk = 20 +}; +static struct stv0367_config netup_stv0367_config[] = { + { + .demod_address = 0x1c, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, { + .demod_address = 0x1d, + .xtal = 27000000, + .if_khz = 4500, + .if_iq_mode = 0, + .ts_mode = 1, + .clk_pol = 0, + }, +}; + +static struct xc5000_config netup_xc5000_config[] = { + { + .i2c_address = 0x61, + .if_khz = 4500, + }, { + .i2c_address = 0x64, + .if_khz = 4500, + }, +}; + +static struct drxk_config terratec_drxk_config[] = { + { + .adr = 0x29, + .no_i2c_bridge = 1, + }, { + .adr = 0x2a, + .no_i2c_bridge = 1, + }, +}; + +static struct mt2063_config terratec_mt2063_config[] = { + { + .tuner_address = 0x60, + }, { + .tuner_address = 0x67, + }, +}; + +int netup_altera_fpga_rw(void *device, int flag, int data, int read) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)device; + unsigned long timeout = jiffies + msecs_to_jiffies(1); + uint32_t mem = 0; + + mem = cx_read(MC417_RWD); + if (read) + cx_set(MC417_OEN, ALT_DATA); + else { + cx_clear(MC417_OEN, ALT_DATA);/* D0-D7 out */ + mem &= ~ALT_DATA; + mem |= (data & ALT_DATA); + } + + if (flag) + mem |= ALT_AD_RG; + else + mem &= ~ALT_AD_RG; + + mem &= ~ALT_CS; + if (read) + mem = (mem & ~ALT_RD) | ALT_WR; + else + mem = (mem & ~ALT_WR) | ALT_RD; + + cx_write(MC417_RWD, mem); /* start RW cycle */ + + for (;;) { + mem = cx_read(MC417_RWD); + if ((mem & ALT_RDY) == 0) + break; + if (time_after(jiffies, timeout)) + break; + udelay(1); + } + + cx_set(MC417_RWD, ALT_RD | ALT_WR | ALT_CS); + if (read) + return mem & ALT_DATA; + + return 0; +}; + +static int dvb_register(struct cx23885_tsport *port) +{ + struct cx23885_dev *dev = port->dev; + struct cx23885_i2c *i2c_bus = NULL, *i2c_bus2 = NULL; + struct videobuf_dvb_frontend *fe0, *fe1 = NULL; + int mfe_shared = 0; /* bus not shared by default */ + int ret; + + /* Get the first frontend */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (!fe0) + return -EINVAL; + + /* init struct videobuf_dvb */ + fe0->dvb.name = dev->name; + + /* multi-frontend gate control is undefined or defaults to fe0 */ + port->frontends.gate = 0; + + /* Sets the gate control callback to be used by i2c command calls */ + port->gate_ctrl = cx23885_dvb_gate_ctrl; + + /* init frontend */ + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1250: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_generic_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1275: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt3305_attach, + &hauppauge_lgdt3305_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr127x_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + + tda18271_attach(&dev->ts1.analog_fe, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800: + i2c_bus = &dev->i2c_bus[0]; + switch (alt_tuner) { + case 1: + fe0->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_ezqam_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + } + break; + case 0: + default: + fe0->dvb.frontend = + dvb_attach(s5h1409_attach, + &hauppauge_generic_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + break; + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1800lp: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1800lp_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(mt2131_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_generic_tunerconfig, 0); + } + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(lgdt330x_attach, + &fusionhdtv_5_express, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(simple_tuner_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, 0x61, + TUNER_LG_TDVS_H06XF); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500Q: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500q_config, + &dev->i2c_bus[0].i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &hauppauge_hvr1500q_tunerconfig); + break; + case CX23885_BOARD_HAUPPAUGE_HVR1500: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &hauppauge_hvr1500_config, + &dev->i2c_bus[0].i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_OREN538, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1200: + case CX23885_BOARD_HAUPPAUGE_HVR1700: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1200_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda829x_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, 0x42, + &tda829x_no_probe); + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1200_tuner_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1210: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(tda10048_attach, + &hauppauge_hvr1210_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_hvr1210_tuner_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1400: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(dib7000p_attach, + &i2c_bus->i2c_adap, + 0x12, &hauppauge_hvr1400_dib7000_config); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x64, + }; + static struct xc2028_ctrl ctl = { + .fname = XC3028L_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_DIBCOM52, + /* This is true for all demods with + v36 firmware? */ + .type = XC2028_D2633, + }; + + fe = dvb_attach(xc2028_attach, + fe0->dvb.frontend, &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP: + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + fe0->dvb.frontend = dvb_attach(s5h1409_attach, + &dvico_s5h1409_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend == NULL) + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &dvico_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(xc5000_attach, fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &dvico_xc5000_tunerconfig); + break; + case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP: { + i2c_bus = &dev->i2c_bus[port->nr - 1]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &i2c_bus->i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + } + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H: + case CX23885_BOARD_COMPRO_VIDEOMATE_E650F: + case CX23885_BOARD_COMPRO_VIDEOMATE_E800: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc2028_config cfg = { + .i2c_adap = &dev->i2c_bus[1].i2c_adap, + .i2c_addr = 0x61, + }; + static struct xc2028_ctrl ctl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64, + .demod = XC3028_FE_ZARLINK456, + }; + + fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, + &cfg); + if (fe != NULL && fe->ops.tuner_ops.set_config != NULL) + fe->ops.tuner_ops.set_config(fe, &ctl); + } + break; + case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000: + i2c_bus = &dev->i2c_bus[0]; + + fe0->dvb.frontend = dvb_attach(zl10353_attach, + &dvico_fusionhdtv_xc3028, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + struct dvb_frontend *fe; + struct xc4000_config cfg = { + .i2c_address = 0x61, + .default_pm = 0, + .dvb_amplitude = 134, + .set_smoothedcvbs = 1, + .if_khz = 4560 + }; + + fe = dvb_attach(xc4000_attach, fe0->dvb.frontend, + &dev->i2c_bus[1].i2c_adap, &cfg); + if (!fe) { + printk(KERN_ERR "%s/2: xc4000 attach failed\n", + dev->name); + goto frontend_detach; + } + } + break; + case CX23885_BOARD_TBS_6920: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &tbs_cx24116_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; + + break; + case CX23885_BOARD_TEVII_S470: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + fe0->dvb.frontend->ops.set_voltage = f300_set_voltage; + + break; + case CX23885_BOARD_DVBWORLD_2005: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(cx24116_attach, + &dvbworld_cx24116_config, + &i2c_bus->i2c_adap); + break; + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + i2c_bus = &dev->i2c_bus[0]; + switch (port->nr) { + /* port B */ + case 1: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 0); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_a, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x09)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + /* port C */ + case 2: + fe0->dvb.frontend = dvb_attach(stv0900_attach, + &netup_stv0900_config, + &i2c_bus->i2c_adap, 1); + if (fe0->dvb.frontend != NULL) { + if (dvb_attach(stv6110_attach, + fe0->dvb.frontend, + &netup_stv6110_tunerconfig_b, + &i2c_bus->i2c_adap)) { + if (!dvb_attach(lnbh24_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + LNBH24_PCL | LNBH24_TTX, + LNBH24_TEN, 0x0a)) + printk(KERN_ERR + "No LNBH24 found!\n"); + + } + } + break; + } + break; + case CX23885_BOARD_MYGICA_X8506: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &mygica_x8506_lgs8gl5_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &mygica_x8506_xc5000_config); + } + break; + case CX23885_BOARD_MAGICPRO_PROHDTVE2: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, + &magicpro_prohdtve2_lgs8g75_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus2->i2c_adap, + &magicpro_prohdtve2_xc5000_config); + } + break; + case CX23885_BOARD_HAUPPAUGE_HVR1850: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + + tda18271_attach(&dev->ts1.analog_fe, + 0x60, &dev->i2c_bus[1].i2c_adap, + &hauppauge_tda18271_config); + + break; + case CX23885_BOARD_HAUPPAUGE_HVR1290: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(s5h1411_attach, + &hcw_s5h1411_config, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) + dvb_attach(tda18271_attach, fe0->dvb.frontend, + 0x60, &dev->i2c_bus[0].i2c_adap, + &hauppauge_tda18271_config); + break; + case CX23885_BOARD_MYGICA_X8558PRO: + switch (port->nr) { + /* port B */ + case 1: + i2c_bus = &dev->i2c_bus[0]; + fe0->dvb.frontend = dvb_attach(atbm8830_attach, + &mygica_x8558pro_atbm8830_cfg1, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(max2165_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &mygic_x8558pro_max2165_cfg1); + } + break; + /* port C */ + case 2: + i2c_bus = &dev->i2c_bus[1]; + fe0->dvb.frontend = dvb_attach(atbm8830_attach, + &mygica_x8558pro_atbm8830_cfg2, + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + dvb_attach(max2165_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &mygic_x8558pro_max2165_cfg2); + } + break; + } + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + i2c_bus = &dev->i2c_bus[0]; + mfe_shared = 1;/* MFE */ + port->frontends.gate = 0;/* not clear for me yet */ + /* ports B, C */ + /* MFE frontend 1 DVB-T */ + fe0->dvb.frontend = dvb_attach(stv0367ter_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (NULL == dvb_attach(xc5000_attach, + fe0->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + /* load xc5000 firmware */ + fe0->dvb.frontend->ops.tuner_ops.init(fe0->dvb.frontend); + } + /* MFE frontend 2 */ + fe1 = videobuf_dvb_get_frontend(&port->frontends, 2); + if (fe1 == NULL) + goto frontend_detach; + /* DVB-C init */ + fe1->dvb.frontend = dvb_attach(stv0367cab_attach, + &netup_stv0367_config[port->nr - 1], + &i2c_bus->i2c_adap); + if (fe1->dvb.frontend != NULL) { + fe1->dvb.frontend->id = 1; + if (NULL == dvb_attach(xc5000_attach, + fe1->dvb.frontend, + &i2c_bus->i2c_adap, + &netup_xc5000_config[port->nr - 1])) + goto frontend_detach; + } + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + i2c_bus = &dev->i2c_bus[0]; + i2c_bus2 = &dev->i2c_bus[1]; + + switch (port->nr) { + /* port b */ + case 1: + fe0->dvb.frontend = dvb_attach(drxk_attach, + &terratec_drxk_config[0], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(mt2063_attach, + fe0->dvb.frontend, + &terratec_mt2063_config[0], + &i2c_bus2->i2c_adap)) + goto frontend_detach; + } + break; + /* port c */ + case 2: + fe0->dvb.frontend = dvb_attach(drxk_attach, + &terratec_drxk_config[1], + &i2c_bus->i2c_adap); + if (fe0->dvb.frontend != NULL) { + if (!dvb_attach(mt2063_attach, + fe0->dvb.frontend, + &terratec_mt2063_config[1], + &i2c_bus2->i2c_adap)) + goto frontend_detach; + } + break; + } + break; + case CX23885_BOARD_TEVII_S471: + i2c_bus = &dev->i2c_bus[1]; + + fe0->dvb.frontend = dvb_attach(ds3000_attach, + &tevii_ds3000_config, + &i2c_bus->i2c_adap); + break; + default: + printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " + " isn't supported yet\n", + dev->name); + break; + } + + if ((NULL == fe0->dvb.frontend) || (fe1 && NULL == fe1->dvb.frontend)) { + printk(KERN_ERR "%s: frontend initialization failed\n", + dev->name); + goto frontend_detach; + } + + /* define general-purpose callback pointer */ + fe0->dvb.frontend->callback = cx23885_tuner_callback; + if (fe1) + fe1->dvb.frontend->callback = cx23885_tuner_callback; +#if 0 + /* Ensure all frontends negotiate bus access */ + fe0->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; + if (fe1) + fe1->dvb.frontend->ops.ts_bus_ctrl = cx23885_dvb_bus_ctrl; +#endif + + /* Put the analog decoder in standby to keep it quiet */ + call_all(dev, core, s_power, 0); + + if (fe0->dvb.frontend->ops.analog_ops.standby) + fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend); + + /* register everything */ + ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port, + &dev->pci->dev, adapter_nr, mfe_shared); + if (ret) + goto frontend_detach; + + /* init CI & MAC */ + switch (dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: { + static struct netup_card_info cinfo; + + netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo); + memcpy(port->frontends.adapter.proposed_mac, + cinfo.port[port->nr - 1].mac, 6); + printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC=%pM\n", + port->nr, port->frontends.adapter.proposed_mac); + + netup_ci_init(port); + break; + } + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: { + struct altera_ci_config netup_ci_cfg = { + .dev = dev,/* magic number to identify*/ + .adapter = &port->frontends.adapter,/* for CI */ + .demux = &fe0->dvb.demux,/* for hw pid filter */ + .fpga_rw = netup_altera_fpga_rw, + }; + + altera_ci_init(&netup_ci_cfg, port->nr); + break; + } + case CX23885_BOARD_TEVII_S470: { + u8 eeprom[256]; /* 24C02 i2c eeprom */ + + if (port->nr != 1) + break; + + /* Read entire EEPROM */ + dev->i2c_bus[0].i2c_client.addr = 0xa0 >> 1; + tveeprom_read(&dev->i2c_bus[0].i2c_client, eeprom, sizeof(eeprom)); + printk(KERN_INFO "TeVii S470 MAC= %pM\n", eeprom + 0xa0); + memcpy(port->frontends.adapter.proposed_mac, eeprom + 0xa0, 6); + break; + } + } + + return ret; + +frontend_detach: + port->gate_ctrl = NULL; + videobuf_dvb_dealloc_frontends(&port->frontends); + return -EINVAL; +} + +int cx23885_dvb_register(struct cx23885_tsport *port) +{ + + struct videobuf_dvb_frontend *fe0; + struct cx23885_dev *dev = port->dev; + int err, i; + + /* Here we need to allocate the correct number of frontends, + * as reflected in the cards struct. The reality is that currently + * no cx23885 boards support this - yet. But, if we don't modify this + * code then the second frontend would never be allocated (later) + * and fail with error before the attach in dvb_register(). + * Without these changes we risk an OOPS later. The changes here + * are for safety, and should provide a good foundation for the + * future addition of any multi-frontend cx23885 based boards. + */ + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, + port->num_frontends); + + for (i = 1; i <= port->num_frontends; i++) { + if (videobuf_dvb_alloc_frontend( + &port->frontends, i) == NULL) { + printk(KERN_ERR "%s() failed to alloc\n", __func__); + return -ENOMEM; + } + + fe0 = videobuf_dvb_get_frontend(&port->frontends, i); + if (!fe0) + err = -EINVAL; + + dprintk(1, "%s\n", __func__); + dprintk(1, " ->probed by Card=%d Name=%s, PCI %02x:%02x\n", + dev->board, + dev->name, + dev->pci_bus, + dev->pci_slot); + + err = -ENODEV; + + /* dvb stuff */ + /* We have to init the queue for each frontend on a port. */ + printk(KERN_INFO "%s: cx23885 based dvb card\n", dev->name); + videobuf_queue_sg_init(&fe0->dvb.dvbq, &dvb_qops, + &dev->pci->dev, &port->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_FIELD_TOP, + sizeof(struct cx23885_buffer), port, NULL); + } + err = dvb_register(port); + if (err != 0) + printk(KERN_ERR "%s() dvb_register failed err = %d\n", + __func__, err); + + return err; +} + +int cx23885_dvb_unregister(struct cx23885_tsport *port) +{ + struct videobuf_dvb_frontend *fe0; + + /* FIXME: in an error condition where the we have + * an expected number of frontends (attach problem) + * then this might not clean up correctly, if 1 + * is invalid. + * This comment only applies to future boards IF they + * implement MFE support. + */ + fe0 = videobuf_dvb_get_frontend(&port->frontends, 1); + if (fe0 && fe0->dvb.frontend) + videobuf_dvb_unregister_bus(&port->frontends); + + switch (port->dev->board) { + case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: + netup_ci_exit(port); + break; + case CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF: + altera_ci_release(port->dev, port->nr); + break; + } + + port->gate_ctrl = NULL; + + return 0; +} + diff --git a/drivers/media/pci/cx23885/cx23885-f300.c b/drivers/media/pci/cx23885/cx23885-f300.c new file mode 100644 index 00000000000..93998f22098 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-f300.c @@ -0,0 +1,177 @@ +/* + * Driver for Silicon Labs C8051F300 microcontroller. + * + * It is used for LNB power control in TeVii S470, + * TBS 6920 PCIe DVB-S2 cards. + * + * Microcontroller connected to cx23885 GPIO pins: + * GPIO0 - data - P0.3 F300 + * GPIO1 - reset - P0.2 F300 + * GPIO2 - clk - P0.1 F300 + * GPIO3 - busy - P0.0 F300 + * + * Copyright (C) 2009 Igor M. Liplianin <liplianin@me.by> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" + +#define F300_DATA GPIO_0 +#define F300_RESET GPIO_1 +#define F300_CLK GPIO_2 +#define F300_BUSY GPIO_3 + +static void f300_set_line(struct cx23885_dev *dev, u32 line, u8 lvl) +{ + cx23885_gpio_enable(dev, line, 1); + if (lvl == 1) + cx23885_gpio_set(dev, line); + else + cx23885_gpio_clear(dev, line); +} + +static u8 f300_get_line(struct cx23885_dev *dev, u32 line) +{ + cx23885_gpio_enable(dev, line, 0); + + return cx23885_gpio_get(dev, line); +} + +static void f300_send_byte(struct cx23885_dev *dev, u8 dta) +{ + u8 i; + + for (i = 0; i < 8; i++) { + f300_set_line(dev, F300_CLK, 0); + udelay(30); + f300_set_line(dev, F300_DATA, (dta & 0x80) >> 7);/* msb first */ + udelay(30); + dta <<= 1; + f300_set_line(dev, F300_CLK, 1); + udelay(30); + } +} + +static u8 f300_get_byte(struct cx23885_dev *dev) +{ + u8 i, dta = 0; + + for (i = 0; i < 8; i++) { + f300_set_line(dev, F300_CLK, 0); + udelay(30); + dta <<= 1; + f300_set_line(dev, F300_CLK, 1); + udelay(30); + dta |= f300_get_line(dev, F300_DATA);/* msb first */ + + } + + return dta; +} + +static u8 f300_xfer(struct dvb_frontend *fe, u8 *buf) +{ + struct cx23885_tsport *port = fe->dvb->priv; + struct cx23885_dev *dev = port->dev; + u8 i, temp, ret = 0; + + temp = buf[0]; + for (i = 0; i < buf[0]; i++) + temp += buf[i + 1]; + temp = (~temp + 1);/* get check sum */ + buf[1 + buf[0]] = temp; + + f300_set_line(dev, F300_RESET, 1); + f300_set_line(dev, F300_CLK, 1); + udelay(30); + f300_set_line(dev, F300_DATA, 1); + msleep(1); + + /* question: */ + f300_set_line(dev, F300_RESET, 0);/* begin to send data */ + msleep(1); + + f300_send_byte(dev, 0xe0);/* the slave address is 0xe0, write */ + msleep(1); + + temp = buf[0]; + temp += 2; + for (i = 0; i < temp; i++) + f300_send_byte(dev, buf[i]); + + f300_set_line(dev, F300_RESET, 1);/* sent data over */ + f300_set_line(dev, F300_DATA, 1); + + /* answer: */ + temp = 0; + for (i = 0; ((i < 8) & (temp == 0)); i++) { + msleep(1); + if (f300_get_line(dev, F300_BUSY) == 0) + temp = 1; + } + + if (i > 7) { + printk(KERN_ERR "%s: timeout, the slave no response\n", + __func__); + ret = 1; /* timeout, the slave no response */ + } else { /* the slave not busy, prepare for getting data */ + f300_set_line(dev, F300_RESET, 0);/*ready...*/ + msleep(1); + f300_send_byte(dev, 0xe1);/* 0xe1 is Read */ + msleep(1); + temp = f300_get_byte(dev);/*get the data length */ + if (temp > 14) + temp = 14; + + for (i = 0; i < (temp + 1); i++) + f300_get_byte(dev);/* get data to empty buffer */ + + f300_set_line(dev, F300_RESET, 1);/* received data over */ + f300_set_line(dev, F300_DATA, 1); + } + + return ret; +} + +int f300_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) +{ + u8 buf[16]; + + buf[0] = 0x05; + buf[1] = 0x38;/* write port */ + buf[2] = 0x01;/* A port, lnb power */ + + switch (voltage) { + case SEC_VOLTAGE_13: + buf[3] = 0x01;/* power on */ + buf[4] = 0x02;/* B port, H/V */ + buf[5] = 0x00;/*13V v*/ + break; + case SEC_VOLTAGE_18: + buf[3] = 0x01; + buf[4] = 0x02; + buf[5] = 0x01;/* 18V h*/ + break; + case SEC_VOLTAGE_OFF: + buf[3] = 0x00;/* power off */ + buf[4] = 0x00; + buf[5] = 0x00; + break; + } + + return f300_xfer(fe, buf); +} diff --git a/drivers/media/pci/cx23885/cx23885-f300.h b/drivers/media/pci/cx23885/cx23885-f300.h new file mode 100644 index 00000000000..e73344c9496 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-f300.h @@ -0,0 +1,2 @@ +extern int f300_set_voltage(struct dvb_frontend *fe, + fe_sec_voltage_t voltage); diff --git a/drivers/media/pci/cx23885/cx23885-i2c.c b/drivers/media/pci/cx23885/cx23885-i2c.c new file mode 100644 index 00000000000..4887314339c --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-i2c.c @@ -0,0 +1,396 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <asm/io.h> + +#include "cx23885.h" + +#include <media/v4l2-common.h> + +static unsigned int i2c_debug; +module_param(i2c_debug, int, 0644); +MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]"); + +static unsigned int i2c_scan; +module_param(i2c_scan, int, 0444); +MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time"); + +#define dprintk(level, fmt, arg...)\ + do { if (i2c_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +#define I2C_WAIT_DELAY 32 +#define I2C_WAIT_RETRY 64 + +#define I2C_EXTEND (1 << 3) +#define I2C_NOSTOP (1 << 4) + +static inline int i2c_slave_did_ack(struct i2c_adapter *i2c_adap) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x01; +} + +static inline int i2c_is_busy(struct i2c_adapter *i2c_adap) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + return cx_read(bus->reg_stat) & 0x02 ? 1 : 0; +} + +static int i2c_wait_done(struct i2c_adapter *i2c_adap) +{ + int count; + + for (count = 0; count < I2C_WAIT_RETRY; count++) { + if (!i2c_is_busy(i2c_adap)) + break; + udelay(I2C_WAIT_DELAY); + } + + if (I2C_WAIT_RETRY == count) + return 0; + + return 1; +} + +static int i2c_sendbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined_rlen) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + u32 wdata, addr, ctrl; + int retval, cnt; + + if (joined_rlen) + dprintk(1, "%s(msg->wlen=%d, nextmsg->rlen=%d)\n", __func__, + msg->len, joined_rlen); + else + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2)); + if (!i2c_wait_done(i2c_adap)) + return -EIO; + if (!i2c_slave_did_ack(i2c_adap)) + return -ENXIO; + + dprintk(1, "%s() returns 0\n", __func__); + return 0; + } + + + /* dev, reg + first byte */ + addr = (msg->addr << 25) | msg->buf[0]; + wdata = msg->buf[0]; + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (msg->len > 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + if (i2c_debug) { + printk(" <W %02x %02x", msg->addr << 1, msg->buf[0]); + if (!(ctrl & I2C_NOSTOP)) + printk(" >\n"); + } + + for (cnt = 1; cnt < msg->len; cnt++) { + /* following bytes */ + wdata = msg->buf[cnt]; + ctrl = bus->i2c_period | (1 << 12) | (1 << 2); + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + else if (joined_rlen) + ctrl |= I2C_NOSTOP; + + cx_write(bus->reg_addr, addr); + cx_write(bus->reg_wdata, wdata); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + return msg->len; + + eio: + retval = -EIO; + if (i2c_debug) + printk(KERN_ERR " ERR: %d\n", retval); + return retval; +} + +static int i2c_readbytes(struct i2c_adapter *i2c_adap, + const struct i2c_msg *msg, int joined) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + u32 ctrl, cnt; + int retval; + + + if (i2c_debug && !joined) + dprintk(1, "%s(msg->len=%d)\n", __func__, msg->len); + + /* Deal with i2c probe functions with zero payload */ + if (msg->len == 0) { + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, bus->i2c_period | (1 << 2) | 1); + if (!i2c_wait_done(i2c_adap)) + return -EIO; + if (!i2c_slave_did_ack(i2c_adap)) + return -ENXIO; + + + dprintk(1, "%s() returns 0\n", __func__); + return 0; + } + + if (i2c_debug) { + if (joined) + dprintk(1, " R"); + else + dprintk(1, " <R %02x", (msg->addr << 1) + 1); + } + + for (cnt = 0; cnt < msg->len; cnt++) { + + ctrl = bus->i2c_period | (1 << 12) | (1 << 2) | 1; + + if (cnt < msg->len - 1) + ctrl |= I2C_NOSTOP | I2C_EXTEND; + + cx_write(bus->reg_addr, msg->addr << 25); + cx_write(bus->reg_ctrl, ctrl); + + if (!i2c_wait_done(i2c_adap)) + goto eio; + msg->buf[cnt] = cx_read(bus->reg_rdata) & 0xff; + if (i2c_debug) { + dprintk(1, " %02x", msg->buf[cnt]); + if (!(ctrl & I2C_NOSTOP)) + dprintk(1, " >\n"); + } + } + return msg->len; + + eio: + retval = -EIO; + if (i2c_debug) + printk(KERN_ERR " ERR: %d\n", retval); + return retval; +} + +static int i2c_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg *msgs, int num) +{ + struct cx23885_i2c *bus = i2c_adap->algo_data; + struct cx23885_dev *dev = bus->dev; + int i, retval = 0; + + dprintk(1, "%s(num = %d)\n", __func__, num); + + for (i = 0 ; i < num; i++) { + dprintk(1, "%s(num = %d) addr = 0x%02x len = 0x%x\n", + __func__, num, msgs[i].addr, msgs[i].len); + if (msgs[i].flags & I2C_M_RD) { + /* read */ + retval = i2c_readbytes(i2c_adap, &msgs[i], 0); + } else if (i + 1 < num && (msgs[i + 1].flags & I2C_M_RD) && + msgs[i].addr == msgs[i + 1].addr) { + /* write then read from same address */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], + msgs[i + 1].len); + if (retval < 0) + goto err; + i++; + retval = i2c_readbytes(i2c_adap, &msgs[i], 1); + } else { + /* write */ + retval = i2c_sendbytes(i2c_adap, &msgs[i], 0); + } + if (retval < 0) + goto err; + } + return num; + + err: + return retval; +} + +static u32 cx23885_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; +} + +static struct i2c_algorithm cx23885_i2c_algo_template = { + .master_xfer = i2c_xfer, + .functionality = cx23885_functionality, +}; + +/* ----------------------------------------------------------------------- */ + +static struct i2c_adapter cx23885_i2c_adap_template = { + .name = "cx23885", + .owner = THIS_MODULE, + .algo = &cx23885_i2c_algo_template, +}; + +static struct i2c_client cx23885_i2c_client_template = { + .name = "cx23885 internal", +}; + +static char *i2c_devs[128] = { + [0x10 >> 1] = "tda10048", + [0x12 >> 1] = "dib7000pc", + [0x1c >> 1] = "lgdt3303", + [0x86 >> 1] = "tda9887", + [0x32 >> 1] = "cx24227", + [0x88 >> 1] = "cx25837", + [0x84 >> 1] = "tda8295", + [0x98 >> 1] = "flatiron", + [0xa0 >> 1] = "eeprom", + [0xc0 >> 1] = "tuner/mt2131/tda8275", + [0xc2 >> 1] = "tuner/mt2131/tda8275/xc5000/xc3028", + [0xc8 >> 1] = "tuner/xc3028L", +}; + +static void do_i2c_scan(char *name, struct i2c_client *c) +{ + unsigned char buf; + int i, rc; + + for (i = 0; i < 128; i++) { + c->addr = i; + rc = i2c_master_recv(c, &buf, 0); + if (rc < 0) + continue; + printk(KERN_INFO "%s: i2c scan: found device @ 0x%x [%s]\n", + name, i << 1, i2c_devs[i] ? i2c_devs[i] : "???"); + } +} + +/* init + register i2c adapter */ +int cx23885_i2c_register(struct cx23885_i2c *bus) +{ + struct cx23885_dev *dev = bus->dev; + + dprintk(1, "%s(bus = %d)\n", __func__, bus->nr); + + bus->i2c_adap = cx23885_i2c_adap_template; + bus->i2c_client = cx23885_i2c_client_template; + bus->i2c_adap.dev.parent = &dev->pci->dev; + + strlcpy(bus->i2c_adap.name, bus->dev->name, + sizeof(bus->i2c_adap.name)); + + bus->i2c_adap.algo_data = bus; + i2c_set_adapdata(&bus->i2c_adap, &dev->v4l2_dev); + i2c_add_adapter(&bus->i2c_adap); + + bus->i2c_client.adapter = &bus->i2c_adap; + + if (0 == bus->i2c_rc) { + dprintk(1, "%s: i2c bus %d registered\n", dev->name, bus->nr); + if (i2c_scan) { + printk(KERN_INFO "%s: scan bus %d:\n", + dev->name, bus->nr); + do_i2c_scan(dev->name, &bus->i2c_client); + } + } else + printk(KERN_WARNING "%s: i2c bus %d register FAILED\n", + dev->name, bus->nr); + + /* Instantiate the IR receiver device, if present */ + if (0 == bus->i2c_rc) { + struct i2c_board_info info; + const unsigned short addr_list[] = { + 0x6b, I2C_CLIENT_END + }; + + memset(&info, 0, sizeof(struct i2c_board_info)); + strlcpy(info.type, "ir_video", I2C_NAME_SIZE); + /* Use quick read command for probe, some IR chips don't + * support writes */ + i2c_new_probed_device(&bus->i2c_adap, &info, addr_list, + i2c_probe_func_quick_read); + } + + return bus->i2c_rc; +} + +int cx23885_i2c_unregister(struct cx23885_i2c *bus) +{ + i2c_del_adapter(&bus->i2c_adap); + return 0; +} + +void cx23885_av_clk(struct cx23885_dev *dev, int enable) +{ + /* write 0 to bus 2 addr 0x144 via i2x_xfer() */ + char buffer[3]; + struct i2c_msg msg; + dprintk(1, "%s(enabled = %d)\n", __func__, enable); + + /* Register 0x144 */ + buffer[0] = 0x01; + buffer[1] = 0x44; + if (enable == 1) + buffer[2] = 0x05; + else + buffer[2] = 0x00; + + msg.addr = 0x44; + msg.flags = I2C_M_TEN; + msg.len = 3; + msg.buf = buffer; + + i2c_xfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); +} + +/* ----------------------------------------------------------------------- */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/cx23885/cx23885-input.c b/drivers/media/pci/cx23885/cx23885-input.c new file mode 100644 index 00000000000..56066721edc --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-input.c @@ -0,0 +1,365 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared remote control input device + * + * Most of this file is + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * However, the cx23885_input_{init,fini} functions contained herein are + * derived from Linux kernel files linux/media/video/.../...-input.c marked as: + * + * Copyright (C) 2008 <srinivasa.deevi at conexant dot com> + * Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> + * Markus Rechberger <mrechberger@gmail.com> + * Mauro Carvalho Chehab <mchehab@infradead.org> + * Sascha Sommer <saschasommer@freenet.de> + * Copyright (C) 2004, 2005 Chris Pascoe + * Copyright (C) 2003, 2004 Gerd Knorr + * Copyright (C) 2003 Pavel Machek + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/slab.h> +#include <media/rc-core.h> +#include <media/v4l2-subdev.h> + +#include "cx23885.h" + +#define MODULE_NAME "cx23885" + +static void cx23885_input_process_measurements(struct cx23885_dev *dev, + bool overrun) +{ + struct cx23885_kernel_ir *kernel_ir = dev->kernel_ir; + + ssize_t num; + int count, i; + bool handle = false; + struct ir_raw_event ir_core_event[64]; + + do { + num = 0; + v4l2_subdev_call(dev->sd_ir, ir, rx_read, (u8 *) ir_core_event, + sizeof(ir_core_event), &num); + + count = num / sizeof(struct ir_raw_event); + + for (i = 0; i < count; i++) { + ir_raw_event_store(kernel_ir->rc, + &ir_core_event[i]); + handle = true; + } + } while (num != 0); + + if (overrun) + ir_raw_event_reset(kernel_ir->rc); + else if (handle) + ir_raw_event_handle(kernel_ir->rc); +} + +void cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events) +{ + struct v4l2_subdev_ir_parameters params; + int overrun, data_available; + + if (dev->sd_ir == NULL || events == 0) + return; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* + * The only boards we handle right now. However other boards + * using the CX2388x integrated IR controller should be similar + */ + break; + default: + return; + } + + overrun = events & (V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN | + V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN); + + data_available = events & (V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED | + V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ); + + if (overrun) { + /* If there was a FIFO overrun, stop the device */ + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + params.enable = false; + /* Mitigate race with cx23885_input_ir_stop() */ + params.shutdown = atomic_read(&dev->ir_input_stopping); + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + } + + if (data_available) + cx23885_input_process_measurements(dev, overrun); + + if (overrun) { + /* If there was a FIFO overrun, clear & restart the device */ + params.enable = true; + /* Mitigate race with cx23885_input_ir_stop() */ + params.shutdown = atomic_read(&dev->ir_input_stopping); + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + } +} + +static int cx23885_input_ir_start(struct cx23885_dev *dev) +{ + struct v4l2_subdev_ir_parameters params; + + if (dev->sd_ir == NULL) + return -ENODEV; + + atomic_set(&dev->ir_input_stopping, 0); + + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* + * The IR controller on this board only returns pulse widths. + * Any other mode setting will fail to set up the device. + */ + params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + params.enable = true; + params.interrupt_enable = true; + params.shutdown = false; + + /* Setup for baseband compatible with both RC-5 and RC-6A */ + params.modulation = false; + /* RC-5: 2,222,222 ns = 1/36 kHz * 32 cycles * 2 marks * 1.25*/ + /* RC-6A: 3,333,333 ns = 1/36 kHz * 16 cycles * 6 marks * 1.25*/ + params.max_pulse_width = 3333333; /* ns */ + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + params.noise_filter_min_width = 333333; /* ns */ + /* + * This board has inverted receive sense: + * mark is received as low logic level; + * falling edges are detected as rising edges; etc. + */ + params.invert_level = true; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + case CX23885_BOARD_TEVII_S470: + /* + * The IR controller on this board only returns pulse widths. + * Any other mode setting will fail to set up the device. + */ + params.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + params.enable = true; + params.interrupt_enable = true; + params.shutdown = false; + + /* Setup for a standard NEC protocol */ + params.carrier_freq = 37917; /* Hz, 455 kHz/12 for NEC */ + params.carrier_range_lower = 33000; /* Hz */ + params.carrier_range_upper = 43000; /* Hz */ + params.duty_cycle = 33; /* percent, 33 percent for NEC */ + + /* + * NEC max pulse width: (64/3)/(455 kHz/12) * 16 nec_units + * (64/3)/(455 kHz/12) * 16 nec_units * 1.375 = 12378022 ns + */ + params.max_pulse_width = 12378022; /* ns */ + + /* + * NEC noise filter min width: (64/3)/(455 kHz/12) * 1 nec_unit + * (64/3)/(455 kHz/12) * 1 nec_units * 0.625 = 351648 ns + */ + params.noise_filter_min_width = 351648; /* ns */ + + params.modulation = false; + params.invert_level = true; + break; + } + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + return 0; +} + +static int cx23885_input_ir_open(struct rc_dev *rc) +{ + struct cx23885_kernel_ir *kernel_ir = rc->priv; + + if (kernel_ir->cx == NULL) + return -ENODEV; + + return cx23885_input_ir_start(kernel_ir->cx); +} + +static void cx23885_input_ir_stop(struct cx23885_dev *dev) +{ + struct v4l2_subdev_ir_parameters params; + + if (dev->sd_ir == NULL) + return; + + /* + * Stop the sd_ir subdevice from generating notifications and + * scheduling work. + * It is shutdown this way in order to mitigate a race with + * cx23885_input_rx_work_handler() in the overrun case, which could + * re-enable the subdevice. + */ + atomic_set(&dev->ir_input_stopping, 1); + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + while (params.shutdown == false) { + params.enable = false; + params.interrupt_enable = false; + params.shutdown = true; + v4l2_subdev_call(dev->sd_ir, ir, rx_s_parameters, ¶ms); + v4l2_subdev_call(dev->sd_ir, ir, rx_g_parameters, ¶ms); + } + flush_work_sync(&dev->cx25840_work); + flush_work_sync(&dev->ir_rx_work); + flush_work_sync(&dev->ir_tx_work); +} + +static void cx23885_input_ir_close(struct rc_dev *rc) +{ + struct cx23885_kernel_ir *kernel_ir = rc->priv; + + if (kernel_ir->cx != NULL) + cx23885_input_ir_stop(kernel_ir->cx); +} + +int cx23885_input_init(struct cx23885_dev *dev) +{ + struct cx23885_kernel_ir *kernel_ir; + struct rc_dev *rc; + char *rc_map; + enum rc_driver_type driver_type; + unsigned long allowed_protos; + + int ret; + + /* + * If the IR device (hardware registers, chip, GPIO lines, etc.) isn't + * encapsulated in a v4l2_subdev, then I'm not going to deal with it. + */ + if (dev->sd_ir == NULL) + return -ENODEV; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1270: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + case CX23885_BOARD_HAUPPAUGE_HVR1290: + case CX23885_BOARD_HAUPPAUGE_HVR1250: + /* Integrated CX2388[58] IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_TYPE_ALL; + /* The grey Hauppauge RC-5 remote */ + rc_map = RC_MAP_HAUPPAUGE; + break; + case CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_TYPE_NEC; + /* The grey Terratec remote with orange buttons */ + rc_map = RC_MAP_NEC_TERRATEC_CINERGY_XS; + break; + case CX23885_BOARD_TEVII_S470: + /* Integrated CX23885 IR controller */ + driver_type = RC_DRIVER_IR_RAW; + allowed_protos = RC_TYPE_ALL; + /* A guess at the remote */ + rc_map = RC_MAP_TEVII_NEC; + break; + default: + return -ENODEV; + } + + /* cx23885 board instance kernel IR state */ + kernel_ir = kzalloc(sizeof(struct cx23885_kernel_ir), GFP_KERNEL); + if (kernel_ir == NULL) + return -ENOMEM; + + kernel_ir->cx = dev; + kernel_ir->name = kasprintf(GFP_KERNEL, "cx23885 IR (%s)", + cx23885_boards[dev->board].name); + kernel_ir->phys = kasprintf(GFP_KERNEL, "pci-%s/ir0", + pci_name(dev->pci)); + + /* input device */ + rc = rc_allocate_device(); + if (!rc) { + ret = -ENOMEM; + goto err_out_free; + } + + kernel_ir->rc = rc; + rc->input_name = kernel_ir->name; + rc->input_phys = kernel_ir->phys; + rc->input_id.bustype = BUS_PCI; + rc->input_id.version = 1; + if (dev->pci->subsystem_vendor) { + rc->input_id.vendor = dev->pci->subsystem_vendor; + rc->input_id.product = dev->pci->subsystem_device; + } else { + rc->input_id.vendor = dev->pci->vendor; + rc->input_id.product = dev->pci->device; + } + rc->dev.parent = &dev->pci->dev; + rc->driver_type = driver_type; + rc->allowed_protos = allowed_protos; + rc->priv = kernel_ir; + rc->open = cx23885_input_ir_open; + rc->close = cx23885_input_ir_close; + rc->map_name = rc_map; + rc->driver_name = MODULE_NAME; + + /* Go */ + dev->kernel_ir = kernel_ir; + ret = rc_register_device(rc); + if (ret) + goto err_out_stop; + + return 0; + +err_out_stop: + cx23885_input_ir_stop(dev); + dev->kernel_ir = NULL; + rc_free_device(rc); +err_out_free: + kfree(kernel_ir->phys); + kfree(kernel_ir->name); + kfree(kernel_ir); + return ret; +} + +void cx23885_input_fini(struct cx23885_dev *dev) +{ + /* Always stop the IR hardware from generating interrupts */ + cx23885_input_ir_stop(dev); + + if (dev->kernel_ir == NULL) + return; + rc_unregister_device(dev->kernel_ir->rc); + kfree(dev->kernel_ir->phys); + kfree(dev->kernel_ir->name); + kfree(dev->kernel_ir); + dev->kernel_ir = NULL; +} diff --git a/drivers/media/pci/cx23885/cx23885-input.h b/drivers/media/pci/cx23885/cx23885-input.h new file mode 100644 index 00000000000..75ef15d3f52 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-input.h @@ -0,0 +1,30 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared remote control input device + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_INPUT_H_ +#define _CX23885_INPUT_H_ +int cx23885_input_rx_work_handler(struct cx23885_dev *dev, u32 events); + +int cx23885_input_init(struct cx23885_dev *dev); +void cx23885_input_fini(struct cx23885_dev *dev); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.c b/drivers/media/pci/cx23885/cx23885-ioctl.c new file mode 100644 index 00000000000..44812ca7889 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ioctl.c @@ -0,0 +1,208 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Various common ioctl() support functions + * + * Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" +#include <media/v4l2-chip-ident.h> + +int cx23885_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + int err = 0; + u8 rev; + + chip->ident = V4L2_IDENT_NONE; + chip->revision = 0; + switch (chip->match.type) { + case V4L2_CHIP_MATCH_HOST: + switch (chip->match.addr) { + case 0: + rev = cx_read(RDR_CFG2) & 0xff; + switch (dev->pci->device) { + case 0x8852: + /* rev 0x04 could be '885 or '888. Pick '888. */ + if (rev == 0x04) + chip->ident = V4L2_IDENT_CX23888; + else + chip->ident = V4L2_IDENT_CX23885; + break; + case 0x8880: + if (rev == 0x0e || rev == 0x0f) + chip->ident = V4L2_IDENT_CX23887; + else + chip->ident = V4L2_IDENT_CX23888; + break; + default: + chip->ident = V4L2_IDENT_UNKNOWN; + break; + } + chip->revision = (dev->pci->device << 16) | (rev << 8) | + (dev->hwrevision & 0xff); + break; + case 1: + if (dev->v4l_device != NULL) { + chip->ident = V4L2_IDENT_CX23417; + chip->revision = 0; + } + break; + case 2: + /* + * The integrated IR controller on the CX23888 is + * host chip 2. It may not be used/initialized or sd_ir + * may be pointing at the cx25840 subdevice for the + * IR controller on the CX23885. Thus we find it + * without using the dev->sd_ir pointer. + */ + call_hw(dev, CX23885_HW_888_IR, core, g_chip_ident, + chip); + break; + default: + err = -EINVAL; /* per V4L2 spec */ + break; + } + break; + case V4L2_CHIP_MATCH_I2C_DRIVER: + /* If needed, returns V4L2_IDENT_AMBIGUOUS without extra work */ + call_all(dev, core, g_chip_ident, chip); + break; + case V4L2_CHIP_MATCH_I2C_ADDR: + /* + * We could return V4L2_IDENT_UNKNOWN, but we don't do the work + * to look if a chip is at the address with no driver. That's a + * dangerous thing to do with EEPROMs anyway. + */ + call_all(dev, core, g_chip_ident, chip); + break; + default: + err = -EINVAL; + break; + } + return err; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx23885_g_host_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0)) + return -EINVAL; + + reg->size = 4; + reg->val = cx_read(reg->reg); + return 0; +} + +static int cx23417_g_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + u32 value; + + if (dev->v4l_device == NULL) + return -EINVAL; + + if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000) + return -EINVAL; + + if (mc417_register_read(dev, (u16) reg->reg, &value)) + return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */ + + reg->size = 4; + reg->val = value; + return 0; +} + +int cx23885_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (reg->match.type == V4L2_CHIP_MATCH_HOST) { + switch (reg->match.addr) { + case 0: + return cx23885_g_host_register(dev, reg); + case 1: + return cx23417_g_register(dev, reg); + default: + break; + } + } + + /* FIXME - any error returns should not be ignored */ + call_all(dev, core, g_register, reg); + return 0; +} + +static int cx23885_s_host_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + if ((reg->reg & 0x3) != 0 || reg->reg >= pci_resource_len(dev->pci, 0)) + return -EINVAL; + + reg->size = 4; + cx_write(reg->reg, reg->val); + return 0; +} + +static int cx23417_s_register(struct cx23885_dev *dev, + struct v4l2_dbg_register *reg) +{ + if (dev->v4l_device == NULL) + return -EINVAL; + + if ((reg->reg & 0x3) != 0 || reg->reg >= 0x10000) + return -EINVAL; + + if (mc417_register_write(dev, (u16) reg->reg, (u32) reg->val)) + return -EINVAL; /* V4L2 spec, but -EREMOTEIO really */ + + reg->size = 4; + return 0; +} + +int cx23885_s_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)fh)->dev; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + if (reg->match.type == V4L2_CHIP_MATCH_HOST) { + switch (reg->match.addr) { + case 0: + return cx23885_s_host_register(dev, reg); + case 1: + return cx23417_s_register(dev, reg); + default: + break; + } + } + + /* FIXME - any error returns should not be ignored */ + call_all(dev, core, s_register, reg); + return 0; +} +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ioctl.h b/drivers/media/pci/cx23885/cx23885-ioctl.h new file mode 100644 index 00000000000..315be0ca5a0 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ioctl.h @@ -0,0 +1,39 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Various common ioctl() support functions + * + * Copyright (c) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _CX23885_IOCTL_H_ +#define _CX23885_IOCTL_H_ + +int cx23885_g_chip_ident(struct file *file, void *fh, + struct v4l2_dbg_chip_ident *chip); + +#ifdef CONFIG_VIDEO_ADV_DEBUG +int cx23885_g_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg); + + +int cx23885_s_register(struct file *file, void *fh, + struct v4l2_dbg_register *reg); + +#endif +#endif diff --git a/drivers/media/pci/cx23885/cx23885-ir.c b/drivers/media/pci/cx23885/cx23885-ir.c new file mode 100644 index 00000000000..7125247dd25 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ir.c @@ -0,0 +1,117 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <media/v4l2-device.h> + +#include "cx23885.h" +#include "cx23885-input.h" + +#define CX23885_IR_RX_FIFO_SERVICE_REQ 0 +#define CX23885_IR_RX_END_OF_RX_DETECTED 1 +#define CX23885_IR_RX_HW_FIFO_OVERRUN 2 +#define CX23885_IR_RX_SW_FIFO_OVERRUN 3 + +#define CX23885_IR_TX_FIFO_SERVICE_REQ 0 + + +void cx23885_ir_rx_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, ir_rx_work); + u32 events = 0; + unsigned long *notifications = &dev->ir_rx_notifications; + + if (test_and_clear_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications)) + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + if (test_and_clear_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications)) + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + if (test_and_clear_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications)) + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + if (test_and_clear_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications)) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + + if (events == 0) + return; + + if (dev->kernel_ir) + cx23885_input_rx_work_handler(dev, events); +} + +void cx23885_ir_tx_work_handler(struct work_struct *work) +{ + struct cx23885_dev *dev = + container_of(work, struct cx23885_dev, ir_tx_work); + u32 events = 0; + unsigned long *notifications = &dev->ir_tx_notifications; + + if (test_and_clear_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications)) + events |= V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + + if (events == 0) + return; + +} + +/* Possibly called in an IRQ context */ +void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events) +{ + struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev); + unsigned long *notifications = &dev->ir_rx_notifications; + + if (events & V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ) + set_bit(CX23885_IR_RX_FIFO_SERVICE_REQ, notifications); + if (events & V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED) + set_bit(CX23885_IR_RX_END_OF_RX_DETECTED, notifications); + if (events & V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN) + set_bit(CX23885_IR_RX_HW_FIFO_OVERRUN, notifications); + if (events & V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN) + set_bit(CX23885_IR_RX_SW_FIFO_OVERRUN, notifications); + + /* + * For the integrated AV core, we are already in a workqueue context. + * For the CX23888 integrated IR, we are in an interrupt context. + */ + if (sd == dev->sd_cx25840) + cx23885_ir_rx_work_handler(&dev->ir_rx_work); + else + schedule_work(&dev->ir_rx_work); +} + +/* Possibly called in an IRQ context */ +void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events) +{ + struct cx23885_dev *dev = to_cx23885(sd->v4l2_dev); + unsigned long *notifications = &dev->ir_tx_notifications; + + if (events & V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ) + set_bit(CX23885_IR_TX_FIFO_SERVICE_REQ, notifications); + + /* + * For the integrated AV core, we are already in a workqueue context. + * For the CX23888 integrated IR, we are in an interrupt context. + */ + if (sd == dev->sd_cx25840) + cx23885_ir_tx_work_handler(&dev->ir_tx_work); + else + schedule_work(&dev->ir_tx_work); +} diff --git a/drivers/media/pci/cx23885/cx23885-ir.h b/drivers/media/pci/cx23885/cx23885-ir.h new file mode 100644 index 00000000000..0c9d8bda9e2 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-ir.h @@ -0,0 +1,31 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * Infrared device support routines - non-input, non-vl42_subdev routines + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23885_IR_H_ +#define _CX23885_IR_H_ +void cx23885_ir_rx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events); +void cx23885_ir_tx_v4l2_dev_notify(struct v4l2_subdev *sd, u32 events); + +void cx23885_ir_rx_work_handler(struct work_struct *work); +void cx23885_ir_tx_work_handler(struct work_struct *work); +#endif diff --git a/drivers/media/pci/cx23885/cx23885-reg.h b/drivers/media/pci/cx23885/cx23885-reg.h new file mode 100644 index 00000000000..a99936e0cbc --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-reg.h @@ -0,0 +1,452 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef _CX23885_REG_H_ +#define _CX23885_REG_H_ + +/* +Address Map +0x00000000 -> 0x00009000 TX SRAM (Fifos) +0x00010000 -> 0x00013c00 RX SRAM CMDS + CDT + +EACH CMDS struct is 0x80 bytes long + +DMAx_PTR1 = 0x03040 address of first cluster +DMAx_PTR2 = 0x10600 address of the CDT +DMAx_CNT1 = cluster size in (bytes >> 4) -1 +DMAx_CNT2 = total cdt size for all entries >> 3 + +Cluster Descriptor entry = 4 DWORDS + DWORD 0 -> ptr to cluster + DWORD 1 Reserved + DWORD 2 Reserved + DWORD 3 Reserved + +Channel manager Data Structure entry = 20 DWORD + 0 IntialProgramCounterLow + 1 IntialProgramCounterHigh + 2 ClusterDescriptorTableBase + 3 ClusterDescriptorTableSize + 4 InstructionQueueBase + 5 InstructionQueueSize +... Reserved + 19 Reserved +*/ + +/* Risc Instructions */ +#define RISC_CNT_INC 0x00010000 +#define RISC_CNT_RESET 0x00030000 +#define RISC_IRQ1 0x01000000 +#define RISC_IRQ2 0x02000000 +#define RISC_EOL 0x04000000 +#define RISC_SOL 0x08000000 +#define RISC_WRITE 0x10000000 +#define RISC_SKIP 0x20000000 +#define RISC_JUMP 0x70000000 +#define RISC_SYNC 0x80000000 +#define RISC_RESYNC 0x80008000 +#define RISC_READ 0x90000000 +#define RISC_WRITERM 0xB0000000 +#define RISC_WRITECM 0xC0000000 +#define RISC_WRITECR 0xD0000000 +#define RISC_WRITEC 0x50000000 +#define RISC_READC 0xA0000000 + + +/* Audio and Video Core */ +#define HOST_REG1 0x00000000 +#define HOST_REG2 0x00000001 +#define HOST_REG3 0x00000002 + +/* Chip Configuration Registers */ +#define CHIP_CTRL 0x00000100 +#define AFE_CTRL 0x00000104 +#define VID_PLL_INT_POST 0x00000108 +#define VID_PLL_FRAC 0x0000010C +#define AUX_PLL_INT_POST 0x00000110 +#define AUX_PLL_FRAC 0x00000114 +#define SYS_PLL_INT_POST 0x00000118 +#define SYS_PLL_FRAC 0x0000011C +#define PIN_CTRL 0x00000120 +#define AUD_IO_CTRL 0x00000124 +#define AUD_LOCK1 0x00000128 +#define AUD_LOCK2 0x0000012C +#define POWER_CTRL 0x00000130 +#define AFE_DIAG_CTRL1 0x00000134 +#define AFE_DIAG_CTRL3 0x0000013C +#define PLL_DIAG_CTRL 0x00000140 +#define AFE_CLK_OUT_CTRL 0x00000144 +#define DLL1_DIAG_CTRL 0x0000015C + +/* GPIO[23:19] Output Enable */ +#define GPIO2_OUT_EN_REG 0x00000160 +/* GPIO[23:19] Data Registers */ +#define GPIO2 0x00000164 + +#define IFADC_CTRL 0x00000180 + +/* Infrared Remote Registers */ +#define IR_CNTRL_REG 0x00000200 +#define IR_TXCLK_REG 0x00000204 +#define IR_RXCLK_REG 0x00000208 +#define IR_CDUTY_REG 0x0000020C +#define IR_STAT_REG 0x00000210 +#define IR_IRQEN_REG 0x00000214 +#define IR_FILTR_REG 0x00000218 +#define IR_FIFO_REG 0x0000023C + +/* Video Decoder Registers */ +#define MODE_CTRL 0x00000400 +#define OUT_CTRL1 0x00000404 +#define OUT_CTRL2 0x00000408 +#define GEN_STAT 0x0000040C +#define INT_STAT_MASK 0x00000410 +#define LUMA_CTRL 0x00000414 +#define HSCALE_CTRL 0x00000418 +#define VSCALE_CTRL 0x0000041C +#define CHROMA_CTRL 0x00000420 +#define VBI_LINE_CTRL1 0x00000424 +#define VBI_LINE_CTRL2 0x00000428 +#define VBI_LINE_CTRL3 0x0000042C +#define VBI_LINE_CTRL4 0x00000430 +#define VBI_LINE_CTRL5 0x00000434 +#define VBI_FC_CFG 0x00000438 +#define VBI_MISC_CFG1 0x0000043C +#define VBI_MISC_CFG2 0x00000440 +#define VBI_PAY1 0x00000444 +#define VBI_PAY2 0x00000448 +#define VBI_CUST1_CFG1 0x0000044C +#define VBI_CUST1_CFG2 0x00000450 +#define VBI_CUST1_CFG3 0x00000454 +#define VBI_CUST2_CFG1 0x00000458 +#define VBI_CUST2_CFG2 0x0000045C +#define VBI_CUST2_CFG3 0x00000460 +#define VBI_CUST3_CFG1 0x00000464 +#define VBI_CUST3_CFG2 0x00000468 +#define VBI_CUST3_CFG3 0x0000046C +#define HORIZ_TIM_CTRL 0x00000470 +#define VERT_TIM_CTRL 0x00000474 +#define SRC_COMB_CFG 0x00000478 +#define CHROMA_VBIOFF_CFG 0x0000047C +#define FIELD_COUNT 0x00000480 +#define MISC_TIM_CTRL 0x00000484 +#define DFE_CTRL1 0x00000488 +#define DFE_CTRL2 0x0000048C +#define DFE_CTRL3 0x00000490 +#define PLL_CTRL 0x00000494 +#define HTL_CTRL 0x00000498 +#define COMB_CTRL 0x0000049C +#define CRUSH_CTRL 0x000004A0 +#define SOFT_RST_CTRL 0x000004A4 +#define CX885_VERSION 0x000004B4 +#define VBI_PASS_CTRL 0x000004BC + +/* Audio Decoder Registers */ +/* 8051 Configuration */ +#define DL_CTL 0x00000800 +#define STD_DET_STATUS 0x00000804 +#define STD_DET_CTL 0x00000808 +#define DW8051_INT 0x0000080C +#define GENERAL_CTL 0x00000810 +#define AAGC_CTL 0x00000814 +#define DEMATRIX_CTL 0x000008CC +#define PATH1_CTL1 0x000008D0 +#define PATH1_VOL_CTL 0x000008D4 +#define PATH1_EQ_CTL 0x000008D8 +#define PATH1_SC_CTL 0x000008DC +#define PATH2_CTL1 0x000008E0 +#define PATH2_VOL_CTL 0x000008E4 +#define PATH2_EQ_CTL 0x000008E8 +#define PATH2_SC_CTL 0x000008EC + +/* Sample Rate Converter */ +#define SRC_CTL 0x000008F0 +#define SRC_LF_COEF 0x000008F4 +#define SRC1_CTL 0x000008F8 +#define SRC2_CTL 0x000008FC +#define SRC3_CTL 0x00000900 +#define SRC4_CTL 0x00000904 +#define SRC5_CTL 0x00000908 +#define SRC6_CTL 0x0000090C +#define BAND_OUT_SEL 0x00000910 +#define I2S_N_CTL 0x00000914 +#define I2S_OUT_CTL 0x00000918 +#define AUTOCONFIG_REG 0x000009C4 + +/* Audio ADC Registers */ +#define DSM_CTRL1 0x00000000 +#define DSM_CTRL2 0x00000001 +#define CHP_EN_CTRL 0x00000002 +#define CHP_CLK_CTRL1 0x00000004 +#define CHP_CLK_CTRL2 0x00000005 +#define BG_REF_CTRL 0x00000006 +#define SD2_SW_CTRL1 0x00000008 +#define SD2_SW_CTRL2 0x00000009 +#define SD2_BIAS_CTRL 0x0000000A +#define AMP_BIAS_CTRL 0x0000000C +#define CH_PWR_CTRL1 0x0000000E +#define FLD_CH_SEL (1 << 3) +#define CH_PWR_CTRL2 0x0000000F +#define DSM_STATUS1 0x00000010 +#define DSM_STATUS2 0x00000011 +#define DIG_CTL1 0x00000012 +#define DIG_CTL2 0x00000013 +#define I2S_TX_CFG 0x0000001A + +#define DEV_CNTRL2 0x00040000 + +#define PCI_MSK_IR (1 << 28) +#define PCI_MSK_AV_CORE (1 << 27) +#define PCI_MSK_GPIO1 (1 << 24) +#define PCI_MSK_GPIO0 (1 << 23) +#define PCI_MSK_APB_DMA (1 << 12) +#define PCI_MSK_AL_WR (1 << 11) +#define PCI_MSK_AL_RD (1 << 10) +#define PCI_MSK_RISC_WR (1 << 9) +#define PCI_MSK_RISC_RD (1 << 8) +#define PCI_MSK_AUD_EXT (1 << 4) +#define PCI_MSK_AUD_INT (1 << 3) +#define PCI_MSK_VID_C (1 << 2) +#define PCI_MSK_VID_B (1 << 1) +#define PCI_MSK_VID_A 1 +#define PCI_INT_MSK 0x00040010 + +#define PCI_INT_STAT 0x00040014 +#define PCI_INT_MSTAT 0x00040018 + +#define VID_A_INT_MSK 0x00040020 +#define VID_A_INT_STAT 0x00040024 +#define VID_A_INT_MSTAT 0x00040028 +#define VID_A_INT_SSTAT 0x0004002C + +#define VID_B_INT_MSK 0x00040030 +#define VID_B_MSK_BAD_PKT (1 << 20) +#define VID_B_MSK_VBI_OPC_ERR (1 << 17) +#define VID_B_MSK_OPC_ERR (1 << 16) +#define VID_B_MSK_VBI_SYNC (1 << 13) +#define VID_B_MSK_SYNC (1 << 12) +#define VID_B_MSK_VBI_OF (1 << 9) +#define VID_B_MSK_OF (1 << 8) +#define VID_B_MSK_VBI_RISCI2 (1 << 5) +#define VID_B_MSK_RISCI2 (1 << 4) +#define VID_B_MSK_VBI_RISCI1 (1 << 1) +#define VID_B_MSK_RISCI1 1 +#define VID_B_INT_STAT 0x00040034 +#define VID_B_INT_MSTAT 0x00040038 +#define VID_B_INT_SSTAT 0x0004003C + +#define VID_B_MSK_BAD_PKT (1 << 20) +#define VID_B_MSK_OPC_ERR (1 << 16) +#define VID_B_MSK_SYNC (1 << 12) +#define VID_B_MSK_OF (1 << 8) +#define VID_B_MSK_RISCI2 (1 << 4) +#define VID_B_MSK_RISCI1 1 + +#define VID_C_MSK_BAD_PKT (1 << 20) +#define VID_C_MSK_OPC_ERR (1 << 16) +#define VID_C_MSK_SYNC (1 << 12) +#define VID_C_MSK_OF (1 << 8) +#define VID_C_MSK_RISCI2 (1 << 4) +#define VID_C_MSK_RISCI1 1 + +/* A superset for testing purposes */ +#define VID_BC_MSK_BAD_PKT (1 << 20) +#define VID_BC_MSK_OPC_ERR (1 << 16) +#define VID_BC_MSK_SYNC (1 << 12) +#define VID_BC_MSK_OF (1 << 8) +#define VID_BC_MSK_VBI_RISCI2 (1 << 5) +#define VID_BC_MSK_RISCI2 (1 << 4) +#define VID_BC_MSK_VBI_RISCI1 (1 << 1) +#define VID_BC_MSK_RISCI1 1 + +#define VID_C_INT_MSK 0x00040040 +#define VID_C_INT_STAT 0x00040044 +#define VID_C_INT_MSTAT 0x00040048 +#define VID_C_INT_SSTAT 0x0004004C + +#define AUDIO_INT_INT_MSK 0x00040050 +#define AUDIO_INT_INT_STAT 0x00040054 +#define AUDIO_INT_INT_MSTAT 0x00040058 +#define AUDIO_INT_INT_SSTAT 0x0004005C + +#define AUDIO_EXT_INT_MSK 0x00040060 +#define AUDIO_EXT_INT_STAT 0x00040064 +#define AUDIO_EXT_INT_MSTAT 0x00040068 +#define AUDIO_EXT_INT_SSTAT 0x0004006C + +#define RDR_CFG0 0x00050000 +#define RDR_CFG1 0x00050004 +#define RDR_CFG2 0x00050008 +#define RDR_RDRCTL1 0x0005030c +#define RDR_TLCTL0 0x00050318 + +/* APB DMAC Current Buffer Pointer */ +#define DMA1_PTR1 0x00100000 +#define DMA2_PTR1 0x00100004 +#define DMA3_PTR1 0x00100008 +#define DMA4_PTR1 0x0010000C +#define DMA5_PTR1 0x00100010 +#define DMA6_PTR1 0x00100014 +#define DMA7_PTR1 0x00100018 +#define DMA8_PTR1 0x0010001C + +/* APB DMAC Current Table Pointer */ +#define DMA1_PTR2 0x00100040 +#define DMA2_PTR2 0x00100044 +#define DMA3_PTR2 0x00100048 +#define DMA4_PTR2 0x0010004C +#define DMA5_PTR2 0x00100050 +#define DMA6_PTR2 0x00100054 +#define DMA7_PTR2 0x00100058 +#define DMA8_PTR2 0x0010005C + +/* APB DMAC Buffer Limit */ +#define DMA1_CNT1 0x00100080 +#define DMA2_CNT1 0x00100084 +#define DMA3_CNT1 0x00100088 +#define DMA4_CNT1 0x0010008C +#define DMA5_CNT1 0x00100090 +#define DMA6_CNT1 0x00100094 +#define DMA7_CNT1 0x00100098 +#define DMA8_CNT1 0x0010009C + +/* APB DMAC Table Size */ +#define DMA1_CNT2 0x001000C0 +#define DMA2_CNT2 0x001000C4 +#define DMA3_CNT2 0x001000C8 +#define DMA4_CNT2 0x001000CC +#define DMA5_CNT2 0x001000D0 +#define DMA6_CNT2 0x001000D4 +#define DMA7_CNT2 0x001000D8 +#define DMA8_CNT2 0x001000DC + +/* Timer Counters */ +#define TM_CNT_LDW 0x00110000 +#define TM_CNT_UW 0x00110004 +#define TM_LMT_LDW 0x00110008 +#define TM_LMT_UW 0x0011000C + +/* GPIO */ +#define GP0_IO 0x00110010 +#define GPIO_ISM 0x00110014 +#define SOFT_RESET 0x0011001C + +/* GPIO (417 Microsoftcontroller) RW Data */ +#define MC417_RWD 0x00110020 + +/* GPIO (417 Microsoftcontroller) Output Enable, Low Active */ +#define MC417_OEN 0x00110024 +#define MC417_CTL 0x00110028 +#define ALT_PIN_OUT_SEL 0x0011002C +#define CLK_DELAY 0x00110048 +#define PAD_CTRL 0x0011004C + +/* Video A Interface */ +#define VID_A_GPCNT 0x00130020 +#define VBI_A_GPCNT 0x00130024 +#define VID_A_GPCNT_CTL 0x00130030 +#define VBI_A_GPCNT_CTL 0x00130034 +#define VID_A_DMA_CTL 0x00130040 +#define VID_A_VIP_CTRL 0x00130080 +#define VID_A_PIXEL_FRMT 0x00130084 +#define VID_A_VBI_CTRL 0x00130088 + +/* Video B Interface */ +#define VID_B_DMA 0x00130100 +#define VBI_B_DMA 0x00130108 +#define VID_B_GPCNT 0x00130120 +#define VBI_B_GPCNT 0x00130124 +#define VID_B_GPCNT_CTL 0x00130134 +#define VBI_B_GPCNT_CTL 0x00130138 +#define VID_B_DMA_CTL 0x00130140 +#define VID_B_SRC_SEL 0x00130144 +#define VID_B_LNGTH 0x00130150 +#define VID_B_HW_SOP_CTL 0x00130154 +#define VID_B_GEN_CTL 0x00130158 +#define VID_B_BD_PKT_STATUS 0x0013015C +#define VID_B_SOP_STATUS 0x00130160 +#define VID_B_FIFO_OVFL_STAT 0x00130164 +#define VID_B_VLD_MISC 0x00130168 +#define VID_B_TS_CLK_EN 0x0013016C +#define VID_B_VIP_CTRL 0x00130180 +#define VID_B_PIXEL_FRMT 0x00130184 + +/* Video C Interface */ +#define VID_C_GPCNT 0x00130220 +#define VID_C_GPCNT_CTL 0x00130230 +#define VBI_C_GPCNT_CTL 0x00130234 +#define VID_C_DMA_CTL 0x00130240 +#define VID_C_LNGTH 0x00130250 +#define VID_C_HW_SOP_CTL 0x00130254 +#define VID_C_GEN_CTL 0x00130258 +#define VID_C_BD_PKT_STATUS 0x0013025C +#define VID_C_SOP_STATUS 0x00130260 +#define VID_C_FIFO_OVFL_STAT 0x00130264 +#define VID_C_VLD_MISC 0x00130268 +#define VID_C_TS_CLK_EN 0x0013026C + +/* Internal Audio Interface */ +#define AUD_INT_A_GPCNT 0x00140020 +#define AUD_INT_B_GPCNT 0x00140024 +#define AUD_INT_A_GPCNT_CTL 0x00140030 +#define AUD_INT_B_GPCNT_CTL 0x00140034 +#define AUD_INT_DMA_CTL 0x00140040 +#define AUD_INT_A_LNGTH 0x00140050 +#define AUD_INT_B_LNGTH 0x00140054 +#define AUD_INT_A_MODE 0x00140058 +#define AUD_INT_B_MODE 0x0014005C + +/* External Audio Interface */ +#define AUD_EXT_DMA 0x00140100 +#define AUD_EXT_GPCNT 0x00140120 +#define AUD_EXT_GPCNT_CTL 0x00140130 +#define AUD_EXT_DMA_CTL 0x00140140 +#define AUD_EXT_LNGTH 0x00140150 +#define AUD_EXT_A_MODE 0x00140158 + +/* I2C Bus 1 */ +#define I2C1_ADDR 0x00180000 +#define I2C1_WDATA 0x00180004 +#define I2C1_CTRL 0x00180008 +#define I2C1_RDATA 0x0018000C +#define I2C1_STAT 0x00180010 + +/* I2C Bus 2 */ +#define I2C2_ADDR 0x00190000 +#define I2C2_WDATA 0x00190004 +#define I2C2_CTRL 0x00190008 +#define I2C2_RDATA 0x0019000C +#define I2C2_STAT 0x00190010 + +/* I2C Bus 3 */ +#define I2C3_ADDR 0x001A0000 +#define I2C3_WDATA 0x001A0004 +#define I2C3_CTRL 0x001A0008 +#define I2C3_RDATA 0x001A000C +#define I2C3_STAT 0x001A0010 + +/* UART */ +#define UART_CTL 0x001B0000 +#define UART_BRD 0x001B0004 +#define UART_ISR 0x001B000C +#define UART_CNT 0x001B0010 + +#endif /* _CX23885_REG_H_ */ diff --git a/drivers/media/pci/cx23885/cx23885-vbi.c b/drivers/media/pci/cx23885/cx23885-vbi.c new file mode 100644 index 00000000000..a1154f035bc --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-vbi.c @@ -0,0 +1,295 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> + +#include "cx23885.h" + +static unsigned int vbibufs = 4; +module_param(vbibufs, int, 0644); +MODULE_PARM_DESC(vbibufs, "number of vbi buffers, range 2-32"); + +static unsigned int vbi_debug; +module_param(vbi_debug, int, 0644); +MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]"); + +#define dprintk(level, fmt, arg...)\ + do { if (vbi_debug >= level)\ + printk(KERN_DEBUG "%s/0: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------ */ + +#define VBI_LINE_LENGTH 1440 +#define NTSC_VBI_START_LINE 10 /* line 10 - 21 */ +#define NTSC_VBI_END_LINE 21 +#define NTSC_VBI_LINES (NTSC_VBI_END_LINE - NTSC_VBI_START_LINE + 1) + + +int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (dev->tvnorm & V4L2_STD_525_60) { + /* ntsc */ + f->fmt.vbi.samples_per_line = VBI_LINE_LENGTH; + f->fmt.vbi.sampling_rate = 27000000; + f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; + f->fmt.vbi.offset = 0; + f->fmt.vbi.flags = 0; + f->fmt.vbi.start[0] = 10; + f->fmt.vbi.count[0] = 17; + f->fmt.vbi.start[1] = 263 + 10 + 1; + f->fmt.vbi.count[1] = 17; + } else if (dev->tvnorm & V4L2_STD_625_50) { + /* pal */ + f->fmt.vbi.sampling_rate = 35468950; + f->fmt.vbi.start[0] = 7 - 1; + f->fmt.vbi.start[1] = 319 - 1; + } + + return 0; +} + +/* We're given the Video Interrupt status register. + * The cx23885_video_irq() func has already validated + * the potential error bits, we just need to + * deal with vbi payload and return indication if + * we actually processed any payload. + */ +int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status) +{ + u32 count; + int handled = 0; + + if (status & VID_BC_MSK_VBI_RISCI1) { + dprintk(1, "%s() VID_BC_MSK_VBI_RISCI1\n", __func__); + spin_lock(&dev->slock); + count = cx_read(VID_A_GPCNT); + cx23885_video_wakeup(dev, &dev->vbiq, count); + spin_unlock(&dev->slock); + handled++; + } + + if (status & VID_BC_MSK_VBI_RISCI2) { + dprintk(1, "%s() VID_BC_MSK_VBI_RISCI2\n", __func__); + dprintk(2, "stopper vbi\n"); + spin_lock(&dev->slock); + cx23885_restart_vbi_queue(dev, &dev->vbiq); + spin_unlock(&dev->slock); + handled++; + } + + return handled; +} + +static int cx23885_start_vbi_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + dprintk(1, "%s()\n", __func__); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH02], + buf->vb.width, buf->risc.dma); + + /* reset counter */ + cx_write(VID_A_GPCNT_CTL, 3); + cx_write(VID_A_VBI_CTRL, 3); + cx_write(VBI_A_GPCNT_CTL, 3); + q->count = 1; + + /* enable irq */ + cx23885_irq_add_enable(dev, 0x01); + cx_set(VID_A_INT_MSK, 0x000022); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x22); /* FIFO and RISC enable */ + + return 0; +} + + +int cx23885_restart_vbi_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf; + struct list_head *item; + + if (list_empty(&q->active)) + return 0; + + buf = list_entry(q->active.next, struct cx23885_buffer, vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_vbi_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30)); + return 0; +} + +void cx23885_vbi_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vbiq; + struct cx23885_buffer *buf; + unsigned long flags; + + /* Stop the VBI engine */ + cx_clear(VID_A_DMA_CTL, 0x22); + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk("%s/0: [%p/%d] timeout - dma=0x%08lx\n", dev->name, + buf, buf->vb.i, (unsigned long)buf->risc.dma); + } + cx23885_restart_vbi_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +/* ------------------------------------------------------------------ */ +#define VBI_LINE_LENGTH 1440 +#define VBI_LINE_COUNT 17 + +static int +vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size) +{ + *size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 == *count) + *count = vbibufs; + if (*count < 2) + *count = 2; + if (*count > 32) + *count = 32; + return 0; +} + +static int +vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + unsigned int size; + int rc; + + size = VBI_LINE_COUNT * VBI_LINE_LENGTH * 2; + if (0 != buf->vb.baddr && buf->vb.bsize < size) + return -EINVAL; + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + buf->vb.width = VBI_LINE_LENGTH; + buf->vb.height = VBI_LINE_COUNT; + buf->vb.size = size; + buf->vb.field = V4L2_FIELD_SEQ_TB; + + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + cx23885_risc_vbibuffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->vb.width * buf->vb.height, + buf->vb.width, 0, + buf->vb.height); + } + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void +vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vbiq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_vbi_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies + (BUFFER_TIMEOUT / 30)); + dprintk(2, "[%p/%d] vbi_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63-32 */ + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + } +} + +static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +struct videobuf_queue_ops cx23885_vbi_qops = { + .buf_setup = vbi_setup, + .buf_prepare = vbi_prepare, + .buf_queue = vbi_queue, + .buf_release = vbi_release, +}; + +/* ------------------------------------------------------------------ */ +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/pci/cx23885/cx23885-video.c b/drivers/media/pci/cx23885/cx23885-video.c new file mode 100644 index 00000000000..22f8e7fbd66 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885-video.c @@ -0,0 +1,1926 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2007 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/list.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kmod.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <asm/div64.h> + +#include "cx23885.h" +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include "cx23885-ioctl.h" +#include "tuner-xc2028.h" + +#include <media/cx25840.h> + +MODULE_DESCRIPTION("v4l2 driver module for cx23885 based TV cards"); +MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); +MODULE_LICENSE("GPL"); + +/* ------------------------------------------------------------------ */ + +static unsigned int video_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int vbi_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; +static unsigned int radio_nr[] = {[0 ... (CX23885_MAXBOARDS - 1)] = UNSET }; + +module_param_array(video_nr, int, NULL, 0444); +module_param_array(vbi_nr, int, NULL, 0444); +module_param_array(radio_nr, int, NULL, 0444); + +MODULE_PARM_DESC(video_nr, "video device numbers"); +MODULE_PARM_DESC(vbi_nr, "vbi device numbers"); +MODULE_PARM_DESC(radio_nr, "radio device numbers"); + +static unsigned int video_debug; +module_param(video_debug, int, 0644); +MODULE_PARM_DESC(video_debug, "enable debug messages [video]"); + +static unsigned int irq_debug; +module_param(irq_debug, int, 0644); +MODULE_PARM_DESC(irq_debug, "enable debug messages [IRQ handler]"); + +static unsigned int vid_limit = 16; +module_param(vid_limit, int, 0644); +MODULE_PARM_DESC(vid_limit, "capture memory limit in megabytes"); + +#define dprintk(level, fmt, arg...)\ + do { if (video_debug >= level)\ + printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\ + } while (0) + +/* ------------------------------------------------------------------- */ +/* static data */ + +#define FORMAT_FLAGS_PACKED 0x01 +#if 0 +static struct cx23885_fmt formats[] = { + { + .name = "8 bpp, gray", + .fourcc = V4L2_PIX_FMT_GREY, + .depth = 8, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB555, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "15 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB555X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_RGB565, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "16 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB565X, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "24 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR24, + .depth = 24, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, le", + .fourcc = V4L2_PIX_FMT_BGR32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "32 bpp RGB, be", + .fourcc = V4L2_PIX_FMT_RGB32, + .depth = 32, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, +}; +#else +static struct cx23885_fmt formats[] = { + { +#if 0 + .name = "4:2:2, packed, UYVY", + .fourcc = V4L2_PIX_FMT_UYVY, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + }, { +#endif + .name = "4:2:2, packed, YUYV", + .fourcc = V4L2_PIX_FMT_YUYV, + .depth = 16, + .flags = FORMAT_FLAGS_PACKED, + } +}; +#endif + +static struct cx23885_fmt *format_by_fourcc(unsigned int fourcc) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(formats); i++) + if (formats[i].fourcc == fourcc) + return formats+i; + + printk(KERN_ERR "%s(%c%c%c%c) NOT FOUND\n", __func__, + (fourcc & 0xff), + ((fourcc >> 8) & 0xff), + ((fourcc >> 16) & 0xff), + ((fourcc >> 24) & 0xff) + ); + return NULL; +} + +/* ------------------------------------------------------------------- */ + +static const struct v4l2_queryctrl no_ctl = { + .name = "42", + .flags = V4L2_CTRL_FLAG_DISABLED, +}; + +static struct cx23885_ctrl cx23885_ctls[] = { + /* --- video --- */ + { + .v = { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .minimum = 0x00, + .maximum = 0xff, + .step = 1, + .default_value = 0x7f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = LUMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + .v = { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .minimum = 0, + .maximum = 0x7f, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = LUMA_CTRL, + .mask = 0xff00, + .shift = 8, + }, { + .v = { + .id = V4L2_CID_HUE, + .name = "Hue", + .minimum = -127, + .maximum = 128, + .step = 1, + .default_value = 0x0, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 128, + .reg = CHROMA_CTRL, + .mask = 0xff0000, + .shift = 16, + }, { + /* strictly, this only describes only U saturation. + * V saturation is handled specially through code. + */ + .v = { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .minimum = 0, + .maximum = 0x7f, + .step = 1, + .default_value = 0x3f, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .off = 0, + .reg = CHROMA_CTRL, + .mask = 0x00ff, + .shift = 0, + }, { + /* --- audio --- */ + .v = { + .id = V4L2_CID_AUDIO_MUTE, + .name = "Mute", + .minimum = 0, + .maximum = 1, + .default_value = 1, + .type = V4L2_CTRL_TYPE_BOOLEAN, + }, + .reg = PATH1_CTL1, + .mask = (0x1f << 24), + .shift = 24, + }, { + .v = { + .id = V4L2_CID_AUDIO_VOLUME, + .name = "Volume", + .minimum = 0, + .maximum = 65535, + .step = 65535 / 100, + .default_value = 65535, + .type = V4L2_CTRL_TYPE_INTEGER, + }, + .reg = PATH1_VOL_CTL, + .mask = 0xff, + .shift = 0, + } +}; +static const int CX23885_CTLS = ARRAY_SIZE(cx23885_ctls); + +/* Must be sorted from low to high control ID! */ +static const u32 cx23885_user_ctrls[] = { + V4L2_CID_USER_CLASS, + V4L2_CID_BRIGHTNESS, + V4L2_CID_CONTRAST, + V4L2_CID_SATURATION, + V4L2_CID_HUE, + V4L2_CID_AUDIO_VOLUME, + V4L2_CID_AUDIO_MUTE, + 0 +}; + +static const u32 *ctrl_classes[] = { + cx23885_user_ctrls, + NULL +}; + +void cx23885_video_wakeup(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, u32 count) +{ + struct cx23885_buffer *buf; + int bc; + + for (bc = 0;; bc++) { + if (list_empty(&q->active)) + break; + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + + /* count comes from the hw and is is 16bit wide -- + * this trick handles wrap-arounds correctly for + * up to 32767 buffers in flight... */ + if ((s16) (count - buf->count) < 0) + break; + + do_gettimeofday(&buf->vb.ts); + dprintk(2, "[%p/%d] wakeup reg=%d buf=%d\n", buf, buf->vb.i, + count, buf->count); + buf->vb.state = VIDEOBUF_DONE; + list_del(&buf->vb.queue); + wake_up(&buf->vb.done); + } + if (list_empty(&q->active)) + del_timer(&q->timeout); + else + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + if (bc != 1) + printk(KERN_ERR "%s: %d buffers handled (should be 1)\n", + __func__, bc); +} + +int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm) +{ + dprintk(1, "%s(norm = 0x%08x) name: [%s]\n", + __func__, + (unsigned int)norm, + v4l2_norm_to_name(norm)); + + dev->tvnorm = norm; + + call_all(dev, core, s_std, norm); + + return 0; +} + +static struct video_device *cx23885_vdev_init(struct cx23885_dev *dev, + struct pci_dev *pci, + struct video_device *template, + char *type) +{ + struct video_device *vfd; + dprintk(1, "%s()\n", __func__); + + vfd = video_device_alloc(); + if (NULL == vfd) + return NULL; + *vfd = *template; + vfd->v4l2_dev = &dev->v4l2_dev; + vfd->release = video_device_release; + snprintf(vfd->name, sizeof(vfd->name), "%s (%s)", + cx23885_boards[dev->board].name, type); + video_set_drvdata(vfd, dev); + return vfd; +} + +static int cx23885_ctrl_query(struct v4l2_queryctrl *qctrl) +{ + int i; + + if (qctrl->id < V4L2_CID_BASE || + qctrl->id >= V4L2_CID_LASTP1) + return -EINVAL; + for (i = 0; i < CX23885_CTLS; i++) + if (cx23885_ctls[i].v.id == qctrl->id) + break; + if (i == CX23885_CTLS) { + *qctrl = no_ctl; + return 0; + } + *qctrl = cx23885_ctls[i].v; + return 0; +} + +/* ------------------------------------------------------------------- */ +/* resource management */ + +static int res_get(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bit) +{ + dprintk(1, "%s()\n", __func__); + if (fh->resources & bit) + /* have it already allocated */ + return 1; + + /* is it free? */ + mutex_lock(&dev->lock); + if (dev->resources & bit) { + /* no, someone else uses it */ + mutex_unlock(&dev->lock); + return 0; + } + /* it's free, grab it */ + fh->resources |= bit; + dev->resources |= bit; + dprintk(1, "res: get %d\n", bit); + mutex_unlock(&dev->lock); + return 1; +} + +static int res_check(struct cx23885_fh *fh, unsigned int bit) +{ + return fh->resources & bit; +} + +static int res_locked(struct cx23885_dev *dev, unsigned int bit) +{ + return dev->resources & bit; +} + +static void res_free(struct cx23885_dev *dev, struct cx23885_fh *fh, + unsigned int bits) +{ + BUG_ON((fh->resources & bits) != bits); + dprintk(1, "%s()\n", __func__); + + mutex_lock(&dev->lock); + fh->resources &= ~bits; + dev->resources &= ~bits; + dprintk(1, "res: put %d\n", bits); + mutex_unlock(&dev->lock); +} + +static int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data) +{ + /* 8 bit registers, 8 bit values */ + u8 buf[] = { reg, data }; + + struct i2c_msg msg = { .addr = 0x98 >> 1, + .flags = 0, .buf = buf, .len = 2 }; + + return i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg, 1); +} + +static u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg) +{ + /* 8 bit registers, 8 bit values */ + int ret; + u8 b0[] = { reg }; + u8 b1[] = { 0 }; + + struct i2c_msg msg[] = { + { .addr = 0x98 >> 1, .flags = 0, .buf = b0, .len = 1 }, + { .addr = 0x98 >> 1, .flags = I2C_M_RD, .buf = b1, .len = 1 } + }; + + ret = i2c_transfer(&dev->i2c_bus[2].i2c_adap, &msg[0], 2); + if (ret != 2) + printk(KERN_ERR "%s() error\n", __func__); + + return b1[0]; +} + +static void cx23885_flatiron_dump(struct cx23885_dev *dev) +{ + int i; + dprintk(1, "Flatiron dump\n"); + for (i = 0; i < 0x24; i++) { + dprintk(1, "FI[%02x] = %02x\n", i, + cx23885_flatiron_read(dev, i)); + } +} + +static int cx23885_flatiron_mux(struct cx23885_dev *dev, int input) +{ + u8 val; + dprintk(1, "%s(input = %d)\n", __func__, input); + + if (input == 1) + val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) & ~FLD_CH_SEL; + else if (input == 2) + val = cx23885_flatiron_read(dev, CH_PWR_CTRL1) | FLD_CH_SEL; + else + return -EINVAL; + + val |= 0x20; /* Enable clock to delta-sigma and dec filter */ + + cx23885_flatiron_write(dev, CH_PWR_CTRL1, val); + + /* Wake up */ + cx23885_flatiron_write(dev, CH_PWR_CTRL2, 0); + + if (video_debug) + cx23885_flatiron_dump(dev); + + return 0; +} + +static int cx23885_video_mux(struct cx23885_dev *dev, unsigned int input) +{ + dprintk(1, "%s() video_mux: %d [vmux=%d, gpio=0x%x,0x%x,0x%x,0x%x]\n", + __func__, + input, INPUT(input)->vmux, + INPUT(input)->gpio0, INPUT(input)->gpio1, + INPUT(input)->gpio2, INPUT(input)->gpio3); + dev->input = input; + + if (dev->board == CX23885_BOARD_MYGICA_X8506 || + dev->board == CX23885_BOARD_MAGICPRO_PROHDTVE2 || + dev->board == CX23885_BOARD_MYGICA_X8507) { + /* Select Analog TV */ + if (INPUT(input)->type == CX23885_VMUX_TELEVISION) + cx23885_gpio_clear(dev, GPIO_0); + } + + /* Tell the internal A/V decoder */ + v4l2_subdev_call(dev->sd_cx25840, video, s_routing, + INPUT(input)->vmux, 0, 0); + + if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1800) || + (dev->board == CX23885_BOARD_MPX885) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1250) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850)) { + /* Configure audio routing */ + v4l2_subdev_call(dev->sd_cx25840, audio, s_routing, + INPUT(input)->amux, 0, 0); + + if (INPUT(input)->amux == CX25840_AUDIO7) + cx23885_flatiron_mux(dev, 1); + else if (INPUT(input)->amux == CX25840_AUDIO6) + cx23885_flatiron_mux(dev, 2); + } + + return 0; +} + +static int cx23885_audio_mux(struct cx23885_dev *dev, unsigned int input) +{ + dprintk(1, "%s(input=%d)\n", __func__, input); + + /* The baseband video core of the cx23885 has two audio inputs. + * LR1 and LR2. In almost every single case so far only HVR1xxx + * cards we've only ever supported LR1. Time to support LR2, + * which is available via the optional white breakout header on + * the board. + * We'll use a could of existing enums in the card struct to allow + * devs to specify which baseband input they need, or just default + * to what we've always used. + */ + if (INPUT(input)->amux == CX25840_AUDIO7) + cx23885_flatiron_mux(dev, 1); + else if (INPUT(input)->amux == CX25840_AUDIO6) + cx23885_flatiron_mux(dev, 2); + else { + /* Not specifically defined, assume the default. */ + cx23885_flatiron_mux(dev, 1); + } + + return 0; +} + +/* ------------------------------------------------------------------ */ +static int cx23885_start_video_dma(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, + struct cx23885_buffer *buf) +{ + dprintk(1, "%s()\n", __func__); + + /* Stop the dma/fifo before we tamper with it's risc programs */ + cx_clear(VID_A_DMA_CTL, 0x11); + + /* setup fifo + format */ + cx23885_sram_channel_setup(dev, &dev->sram_channels[SRAM_CH01], + buf->bpl, buf->risc.dma); + + /* reset counter */ + cx_write(VID_A_GPCNT_CTL, 3); + q->count = 1; + + /* enable irq */ + cx23885_irq_add_enable(dev, 0x01); + cx_set(VID_A_INT_MSK, 0x000011); + + /* start dma */ + cx_set(DEV_CNTRL2, (1<<5)); + cx_set(VID_A_DMA_CTL, 0x11); /* FIFO and RISC enable */ + + return 0; +} + + +static int cx23885_restart_video_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q) +{ + struct cx23885_buffer *buf, *prev; + struct list_head *item; + dprintk(1, "%s()\n", __func__); + + if (!list_empty(&q->active)) { + buf = list_entry(q->active.next, struct cx23885_buffer, + vb.queue); + dprintk(2, "restart_queue [%p/%d]: restart dma\n", + buf, buf->vb.i); + cx23885_start_video_dma(dev, q, buf); + list_for_each(item, &q->active) { + buf = list_entry(item, struct cx23885_buffer, + vb.queue); + buf->count = q->count++; + } + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + return 0; + } + + prev = NULL; + for (;;) { + if (list_empty(&q->queued)) + return 0; + buf = list_entry(q->queued.next, struct cx23885_buffer, + vb.queue); + if (NULL == prev) { + list_move_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] restart_queue - first active\n", + buf, buf->vb.i); + + } else if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_move_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + prev->risc.jmp[2] = cpu_to_le32(0); /* Bits 63 - 32 */ + dprintk(2, "[%p/%d] restart_queue - move to active\n", + buf, buf->vb.i); + } else { + return 0; + } + prev = buf; + } +} + +static int buffer_setup(struct videobuf_queue *q, unsigned int *count, + unsigned int *size) +{ + struct cx23885_fh *fh = q->priv_data; + + *size = fh->fmt->depth*fh->width*fh->height >> 3; + if (0 == *count) + *count = 32; + if (*size * *count > vid_limit * 1024 * 1024) + *count = (vid_limit * 1024 * 1024) / *size; + return 0; +} + +static int buffer_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb, + enum v4l2_field field) +{ + struct cx23885_fh *fh = q->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_buffer *buf = + container_of(vb, struct cx23885_buffer, vb); + int rc, init_buffer = 0; + u32 line0_offset, line1_offset; + struct videobuf_dmabuf *dma = videobuf_to_dma(&buf->vb); + int field_tff; + + BUG_ON(NULL == fh->fmt); + if (fh->width < 48 || fh->width > norm_maxw(dev->tvnorm) || + fh->height < 32 || fh->height > norm_maxh(dev->tvnorm)) + return -EINVAL; + buf->vb.size = (fh->width * fh->height * fh->fmt->depth) >> 3; + if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size) + return -EINVAL; + + if (buf->fmt != fh->fmt || + buf->vb.width != fh->width || + buf->vb.height != fh->height || + buf->vb.field != field) { + buf->fmt = fh->fmt; + buf->vb.width = fh->width; + buf->vb.height = fh->height; + buf->vb.field = field; + init_buffer = 1; + } + + if (VIDEOBUF_NEEDS_INIT == buf->vb.state) { + init_buffer = 1; + rc = videobuf_iolock(q, &buf->vb, NULL); + if (0 != rc) + goto fail; + } + + if (init_buffer) { + buf->bpl = buf->vb.width * buf->fmt->depth >> 3; + switch (buf->vb.field) { + case V4L2_FIELD_TOP: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, 0, UNSET, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_BOTTOM: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, UNSET, 0, + buf->bpl, 0, buf->vb.height); + break; + case V4L2_FIELD_INTERLACED: + if (dev->tvnorm & V4L2_STD_NTSC) + /* NTSC or */ + field_tff = 1; + else + field_tff = 0; + + if (cx23885_boards[dev->board].force_bff) + /* PAL / SECAM OR 888 in NTSC MODE */ + field_tff = 0; + + if (field_tff) { + /* cx25840 transmits NTSC bottom field first */ + dprintk(1, "%s() Creating TFF/NTSC risc\n", + __func__); + line0_offset = buf->bpl; + line1_offset = 0; + } else { + /* All other formats are top field first */ + dprintk(1, "%s() Creating BFF/PAL/SECAM risc\n", + __func__); + line0_offset = 0; + line1_offset = buf->bpl; + } + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, line0_offset, + line1_offset, + buf->bpl, buf->bpl, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_TB: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + 0, buf->bpl * (buf->vb.height >> 1), + buf->bpl, 0, + buf->vb.height >> 1); + break; + case V4L2_FIELD_SEQ_BT: + cx23885_risc_buffer(dev->pci, &buf->risc, + dma->sglist, + buf->bpl * (buf->vb.height >> 1), 0, + buf->bpl, 0, + buf->vb.height >> 1); + break; + default: + BUG(); + } + } + dprintk(2, "[%p/%d] buffer_prep - %dx%d %dbpp \"%s\" - dma=0x%08lx\n", + buf, buf->vb.i, + fh->width, fh->height, fh->fmt->depth, fh->fmt->name, + (unsigned long)buf->risc.dma); + + buf->vb.state = VIDEOBUF_PREPARED; + return 0; + + fail: + cx23885_free_buffer(q, buf); + return rc; +} + +static void buffer_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + struct cx23885_buffer *prev; + struct cx23885_fh *fh = vq->priv_data; + struct cx23885_dev *dev = fh->dev; + struct cx23885_dmaqueue *q = &dev->vidq; + + /* add jump to stopper */ + buf->risc.jmp[0] = cpu_to_le32(RISC_JUMP | RISC_IRQ1 | RISC_CNT_INC); + buf->risc.jmp[1] = cpu_to_le32(q->stopper.dma); + buf->risc.jmp[2] = cpu_to_le32(0); /* bits 63-32 */ + + if (!list_empty(&q->queued)) { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - append to queued\n", + buf, buf->vb.i); + + } else if (list_empty(&q->active)) { + list_add_tail(&buf->vb.queue, &q->active); + cx23885_start_video_dma(dev, q, buf); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + mod_timer(&q->timeout, jiffies+BUFFER_TIMEOUT); + dprintk(2, "[%p/%d] buffer_queue - first active\n", + buf, buf->vb.i); + + } else { + prev = list_entry(q->active.prev, struct cx23885_buffer, + vb.queue); + if (prev->vb.width == buf->vb.width && + prev->vb.height == buf->vb.height && + prev->fmt == buf->fmt) { + list_add_tail(&buf->vb.queue, &q->active); + buf->vb.state = VIDEOBUF_ACTIVE; + buf->count = q->count++; + prev->risc.jmp[1] = cpu_to_le32(buf->risc.dma); + /* 64 bit bits 63-32 */ + prev->risc.jmp[2] = cpu_to_le32(0); + dprintk(2, "[%p/%d] buffer_queue - append to active\n", + buf, buf->vb.i); + + } else { + list_add_tail(&buf->vb.queue, &q->queued); + buf->vb.state = VIDEOBUF_QUEUED; + dprintk(2, "[%p/%d] buffer_queue - first queued\n", + buf, buf->vb.i); + } + } +} + +static void buffer_release(struct videobuf_queue *q, + struct videobuf_buffer *vb) +{ + struct cx23885_buffer *buf = container_of(vb, + struct cx23885_buffer, vb); + + cx23885_free_buffer(q, buf); +} + +static struct videobuf_queue_ops cx23885_video_qops = { + .buf_setup = buffer_setup, + .buf_prepare = buffer_prepare, + .buf_queue = buffer_queue, + .buf_release = buffer_release, +}; + +static struct videobuf_queue *get_queue(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return &fh->vidq; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return &fh->vbiq; + default: + BUG(); + return NULL; + } +} + +static int get_resource(struct cx23885_fh *fh) +{ + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + return RESOURCE_VIDEO; + case V4L2_BUF_TYPE_VBI_CAPTURE: + return RESOURCE_VBI; + default: + BUG(); + return 0; + } +} + +static int video_open(struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct cx23885_dev *dev = video_drvdata(file); + struct cx23885_fh *fh; + enum v4l2_buf_type type = 0; + int radio = 0; + + switch (vdev->vfl_type) { + case VFL_TYPE_GRABBER: + type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + break; + case VFL_TYPE_VBI: + type = V4L2_BUF_TYPE_VBI_CAPTURE; + break; + case VFL_TYPE_RADIO: + radio = 1; + break; + } + + dprintk(1, "open dev=%s radio=%d type=%s\n", + video_device_node_name(vdev), radio, v4l2_type_names[type]); + + /* allocate + initialize per filehandle data */ + fh = kzalloc(sizeof(*fh), GFP_KERNEL); + if (NULL == fh) + return -ENOMEM; + + file->private_data = fh; + fh->dev = dev; + fh->radio = radio; + fh->type = type; + fh->width = 320; + fh->height = 240; + fh->fmt = format_by_fourcc(V4L2_PIX_FMT_YUYV); + + videobuf_queue_sg_init(&fh->vidq, &cx23885_video_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VIDEO_CAPTURE, + V4L2_FIELD_INTERLACED, + sizeof(struct cx23885_buffer), + fh, NULL); + + videobuf_queue_sg_init(&fh->vbiq, &cx23885_vbi_qops, + &dev->pci->dev, &dev->slock, + V4L2_BUF_TYPE_VBI_CAPTURE, + V4L2_FIELD_SEQ_TB, + sizeof(struct cx23885_buffer), + fh, NULL); + + + dprintk(1, "post videobuf_queue_init()\n"); + + return 0; +} + +static ssize_t video_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + struct cx23885_fh *fh = file->private_data; + + switch (fh->type) { + case V4L2_BUF_TYPE_VIDEO_CAPTURE: + if (res_locked(fh->dev, RESOURCE_VIDEO)) + return -EBUSY; + return videobuf_read_one(&fh->vidq, data, count, ppos, + file->f_flags & O_NONBLOCK); + case V4L2_BUF_TYPE_VBI_CAPTURE: + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return -EBUSY; + return videobuf_read_stream(&fh->vbiq, data, count, ppos, 1, + file->f_flags & O_NONBLOCK); + default: + BUG(); + return 0; + } +} + +static unsigned int video_poll(struct file *file, + struct poll_table_struct *wait) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_buffer *buf; + unsigned int rc = POLLERR; + + if (V4L2_BUF_TYPE_VBI_CAPTURE == fh->type) { + if (!res_get(fh->dev, fh, RESOURCE_VBI)) + return POLLERR; + return videobuf_poll_stream(file, &fh->vbiq, wait); + } + + mutex_lock(&fh->vidq.vb_lock); + if (res_check(fh, RESOURCE_VIDEO)) { + /* streaming capture */ + if (list_empty(&fh->vidq.stream)) + goto done; + buf = list_entry(fh->vidq.stream.next, + struct cx23885_buffer, vb.stream); + } else { + /* read() capture */ + buf = (struct cx23885_buffer *)fh->vidq.read_buf; + if (NULL == buf) + goto done; + } + poll_wait(file, &buf->vb.done, wait); + if (buf->vb.state == VIDEOBUF_DONE || + buf->vb.state == VIDEOBUF_ERROR) + rc = POLLIN|POLLRDNORM; + else + rc = 0; +done: + mutex_unlock(&fh->vidq.vb_lock); + return rc; +} + +static int video_release(struct file *file) +{ + struct cx23885_fh *fh = file->private_data; + struct cx23885_dev *dev = fh->dev; + + /* turn off overlay */ + if (res_check(fh, RESOURCE_OVERLAY)) { + /* FIXME */ + res_free(dev, fh, RESOURCE_OVERLAY); + } + + /* stop video capture */ + if (res_check(fh, RESOURCE_VIDEO)) { + videobuf_queue_cancel(&fh->vidq); + res_free(dev, fh, RESOURCE_VIDEO); + } + if (fh->vidq.read_buf) { + buffer_release(&fh->vidq, fh->vidq.read_buf); + kfree(fh->vidq.read_buf); + } + + /* stop vbi capture */ + if (res_check(fh, RESOURCE_VBI)) { + if (fh->vbiq.streaming) + videobuf_streamoff(&fh->vbiq); + if (fh->vbiq.reading) + videobuf_read_stop(&fh->vbiq); + res_free(dev, fh, RESOURCE_VBI); + } + + videobuf_mmap_free(&fh->vidq); + videobuf_mmap_free(&fh->vbiq); + + file->private_data = NULL; + kfree(fh); + + /* We are not putting the tuner to sleep here on exit, because + * we want to use the mpeg encoder in another session to capture + * tuner video. Closing this will result in no video to the encoder. + */ + + return 0; +} + +static int video_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct cx23885_fh *fh = file->private_data; + + return videobuf_mmap_mapper(get_queue(fh), vma); +} + +/* ------------------------------------------------------------------ */ +/* VIDEO CTRL IOCTLS */ + +int cx23885_get_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_G_CTRL)\n", __func__); + call_all(dev, core, g_ctrl, ctl); + return 0; +} + +int cx23885_set_control(struct cx23885_dev *dev, + struct v4l2_control *ctl) +{ + dprintk(1, "%s() calling cx25840(VIDIOC_S_CTRL)\n", __func__); + call_all(dev, core, s_ctrl, ctl); + + return 0; +} + +static void init_controls(struct cx23885_dev *dev) +{ + struct v4l2_control ctrl; + int i; + + for (i = 0; i < CX23885_CTLS; i++) { + ctrl.id = cx23885_ctls[i].v.id; + ctrl.value = cx23885_ctls[i].v.default_value; + + cx23885_set_control(dev, &ctrl); + } +} + +/* ------------------------------------------------------------------ */ +/* VIDEO IOCTLS */ + +static int vidioc_g_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + + f->fmt.pix.width = fh->width; + f->fmt.pix.height = fh->height; + f->fmt.pix.field = fh->vidq.field; + f->fmt.pix.pixelformat = fh->fmt->fourcc; + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fh->fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_try_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + struct cx23885_fmt *fmt; + enum v4l2_field field; + unsigned int maxw, maxh; + + fmt = format_by_fourcc(f->fmt.pix.pixelformat); + if (NULL == fmt) + return -EINVAL; + + field = f->fmt.pix.field; + maxw = norm_maxw(dev->tvnorm); + maxh = norm_maxh(dev->tvnorm); + + if (V4L2_FIELD_ANY == field) { + field = (f->fmt.pix.height > maxh/2) + ? V4L2_FIELD_INTERLACED + : V4L2_FIELD_BOTTOM; + } + + switch (field) { + case V4L2_FIELD_TOP: + case V4L2_FIELD_BOTTOM: + maxh = maxh / 2; + break; + case V4L2_FIELD_INTERLACED: + break; + default: + return -EINVAL; + } + + f->fmt.pix.field = field; + v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2, + &f->fmt.pix.height, 32, maxh, 0, 0); + f->fmt.pix.bytesperline = + (f->fmt.pix.width * fmt->depth) >> 3; + f->fmt.pix.sizeimage = + f->fmt.pix.height * f->fmt.pix.bytesperline; + + return 0; +} + +static int vidioc_s_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_format *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + struct v4l2_mbus_framefmt mbus_fmt; + int err; + + dprintk(2, "%s()\n", __func__); + err = vidioc_try_fmt_vid_cap(file, priv, f); + + if (0 != err) + return err; + fh->fmt = format_by_fourcc(f->fmt.pix.pixelformat); + fh->width = f->fmt.pix.width; + fh->height = f->fmt.pix.height; + fh->vidq.field = f->fmt.pix.field; + dprintk(2, "%s() width=%d height=%d field=%d\n", __func__, + fh->width, fh->height, fh->vidq.field); + v4l2_fill_mbus_format(&mbus_fmt, &f->fmt.pix, V4L2_MBUS_FMT_FIXED); + call_all(dev, video, s_mbus_fmt, &mbus_fmt); + v4l2_fill_pix_format(&f->fmt.pix, &mbus_fmt); + return 0; +} + +static int vidioc_querycap(struct file *file, void *priv, + struct v4l2_capability *cap) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + strcpy(cap->driver, "cx23885"); + strlcpy(cap->card, cx23885_boards[dev->board].name, + sizeof(cap->card)); + sprintf(cap->bus_info, "PCIe:%s", pci_name(dev->pci)); + cap->capabilities = + V4L2_CAP_VIDEO_CAPTURE | + V4L2_CAP_READWRITE | + V4L2_CAP_STREAMING | + V4L2_CAP_VBI_CAPTURE; + if (UNSET != dev->tuner_type) + cap->capabilities |= V4L2_CAP_TUNER; + return 0; +} + +static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv, + struct v4l2_fmtdesc *f) +{ + if (unlikely(f->index >= ARRAY_SIZE(formats))) + return -EINVAL; + + strlcpy(f->description, formats[f->index].name, + sizeof(f->description)); + f->pixelformat = formats[f->index].fourcc; + + return 0; +} + +static int vidioc_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_reqbufs(get_queue(fh), p); +} + +static int vidioc_querybuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_querybuf(get_queue(fh), p); +} + +static int vidioc_qbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_qbuf(get_queue(fh), p); +} + +static int vidioc_dqbuf(struct file *file, void *priv, + struct v4l2_buffer *p) +{ + struct cx23885_fh *fh = priv; + return videobuf_dqbuf(get_queue(fh), p, + file->f_flags & O_NONBLOCK); +} + +static int vidioc_streamon(struct file *file, void *priv, + enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + dprintk(1, "%s()\n", __func__); + + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + if (unlikely(i != fh->type)) + return -EINVAL; + + if (unlikely(!res_get(dev, fh, get_resource(fh)))) + return -EBUSY; + + /* Don't start VBI streaming unless vida streaming + * has already started. + */ + if ((fh->type == V4L2_BUF_TYPE_VBI_CAPTURE) && + ((cx_read(VID_A_DMA_CTL) & 0x11) == 0)) + return -EINVAL; + + return videobuf_streamon(get_queue(fh)); +} + +static int vidioc_streamoff(struct file *file, void *priv, enum v4l2_buf_type i) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + int err, res; + dprintk(1, "%s()\n", __func__); + + if ((fh->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) && + (fh->type != V4L2_BUF_TYPE_VBI_CAPTURE)) + return -EINVAL; + if (i != fh->type) + return -EINVAL; + + res = get_resource(fh); + err = videobuf_streamoff(get_queue(fh)); + if (err < 0) + return err; + res_free(dev, fh, res); + return 0; +} + +static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + + call_all(dev, core, g_std, id); + + return 0; +} + +static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id *tvnorms) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, *tvnorms); + mutex_unlock(&dev->lock); + + return 0; +} + +int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i) +{ + static const char *iname[] = { + [CX23885_VMUX_COMPOSITE1] = "Composite1", + [CX23885_VMUX_COMPOSITE2] = "Composite2", + [CX23885_VMUX_COMPOSITE3] = "Composite3", + [CX23885_VMUX_COMPOSITE4] = "Composite4", + [CX23885_VMUX_SVIDEO] = "S-Video", + [CX23885_VMUX_COMPONENT] = "Component", + [CX23885_VMUX_TELEVISION] = "Television", + [CX23885_VMUX_CABLE] = "Cable TV", + [CX23885_VMUX_DVB] = "DVB", + [CX23885_VMUX_DEBUG] = "for debug only", + }; + unsigned int n; + dprintk(1, "%s()\n", __func__); + + n = i->index; + if (n >= MAX_CX23885_INPUT) + return -EINVAL; + + if (0 == INPUT(n)->type) + return -EINVAL; + + i->index = n; + i->type = V4L2_INPUT_TYPE_CAMERA; + strcpy(i->name, iname[INPUT(n)->type]); + if ((CX23885_VMUX_TELEVISION == INPUT(n)->type) || + (CX23885_VMUX_CABLE == INPUT(n)->type)) { + i->type = V4L2_INPUT_TYPE_TUNER; + i->std = CX23885_NORMS; + } + + /* Two selectable audio inputs for non-tv inputs */ + if (INPUT(n)->type != CX23885_VMUX_TELEVISION) + i->audioset = 0x3; + + if (dev->input == n) { + /* enum'd input matches our configured input. + * Ask the video decoder to process the call + * and give it an oppertunity to update the + * status field. + */ + call_all(dev, video, g_input_status, &i->status); + } + + return 0; +} + +static int vidioc_enum_input(struct file *file, void *priv, + struct v4l2_input *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + dprintk(1, "%s()\n", __func__); + return cx23885_enum_input(dev, i); +} + +int cx23885_get_input(struct file *file, void *priv, unsigned int *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + *i = dev->input; + dprintk(1, "%s() returns %d\n", __func__, *i); + return 0; +} + +static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) +{ + return cx23885_get_input(file, priv, i); +} + +int cx23885_set_input(struct file *file, void *priv, unsigned int i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + dprintk(1, "%s(%d)\n", __func__, i); + + if (i >= MAX_CX23885_INPUT) { + dprintk(1, "%s() -EINVAL\n", __func__); + return -EINVAL; + } + + if (INPUT(i)->type == 0) + return -EINVAL; + + mutex_lock(&dev->lock); + cx23885_video_mux(dev, i); + + /* By default establish the default audio input for the card also */ + /* Caller is free to use VIDIOC_S_AUDIO to override afterwards */ + cx23885_audio_mux(dev, i); + mutex_unlock(&dev->lock); + return 0; +} + +static int vidioc_s_input(struct file *file, void *priv, unsigned int i) +{ + return cx23885_set_input(file, priv, i); +} + +static int vidioc_log_status(struct file *file, void *priv) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + printk(KERN_INFO + "%s/0: ============ START LOG STATUS ============\n", + dev->name); + call_all(dev, core, log_status); + printk(KERN_INFO + "%s/0: ============= END LOG STATUS =============\n", + dev->name); + return 0; +} + +static int cx23885_query_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + static const char *iname[] = { + [0] = "Baseband L/R 1", + [1] = "Baseband L/R 2", + }; + unsigned int n; + dprintk(1, "%s()\n", __func__); + + n = i->index; + if (n >= 2) + return -EINVAL; + + memset(i, 0, sizeof(*i)); + i->index = n; + strcpy(i->name, iname[n]); + i->capability = V4L2_AUDCAP_STEREO; + i->mode = V4L2_AUDMODE_AVL; + return 0; + +} + +static int vidioc_enum_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + return cx23885_query_audinput(file, priv, i); +} + +static int vidioc_g_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + i->index = dev->audinput; + dprintk(1, "%s(input=%d)\n", __func__, i->index); + + return cx23885_query_audinput(file, priv, i); +} + +static int vidioc_s_audinput(struct file *file, void *priv, + struct v4l2_audio *i) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + if (i->index >= 2) + return -EINVAL; + + dprintk(1, "%s(%d)\n", __func__, i->index); + + dev->audinput = i->index; + + /* Skip the audio defaults from the cards struct, caller wants + * directly touch the audio mux hardware. */ + cx23885_flatiron_mux(dev, dev->audinput + 1); + return 0; +} + +static int vidioc_queryctrl(struct file *file, void *priv, + struct v4l2_queryctrl *qctrl) +{ + qctrl->id = v4l2_ctrl_next(ctrl_classes, qctrl->id); + if (unlikely(qctrl->id == 0)) + return -EINVAL; + return cx23885_ctrl_query(qctrl); +} + +static int vidioc_g_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_get_control(dev, ctl); +} + +static int vidioc_s_ctrl(struct file *file, void *priv, + struct v4l2_control *ctl) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + return cx23885_set_control(dev, ctl); +} + +static int vidioc_g_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + + strcpy(t->name, "Television"); + + call_all(dev, tuner, g_tuner, t); + return 0; +} + +static int vidioc_s_tuner(struct file *file, void *priv, + struct v4l2_tuner *t) +{ + struct cx23885_dev *dev = ((struct cx23885_fh *)priv)->dev; + + if (UNSET == dev->tuner_type) + return -EINVAL; + if (0 != t->index) + return -EINVAL; + /* Update the A/V core */ + call_all(dev, tuner, s_tuner, t); + + return 0; +} + +static int vidioc_g_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + + /* f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; */ + f->type = fh->radio ? V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV; + f->frequency = dev->freq; + + call_all(dev, tuner, g_frequency, f); + + return 0; +} + +static int cx23885_set_freq(struct cx23885_dev *dev, struct v4l2_frequency *f) +{ + struct v4l2_control ctrl; + + if (unlikely(UNSET == dev->tuner_type)) + return -EINVAL; + if (unlikely(f->tuner != 0)) + return -EINVAL; + + mutex_lock(&dev->lock); + dev->freq = f->frequency; + + /* I need to mute audio here */ + ctrl.id = V4L2_CID_AUDIO_MUTE; + ctrl.value = 1; + cx23885_set_control(dev, &ctrl); + + call_all(dev, tuner, s_frequency, f); + + /* When changing channels it is required to reset TVAUDIO */ + msleep(100); + + /* I need to unmute audio here */ + ctrl.value = 0; + cx23885_set_control(dev, &ctrl); + + mutex_unlock(&dev->lock); + + return 0; +} + +static int cx23885_set_freq_via_ops(struct cx23885_dev *dev, + struct v4l2_frequency *f) +{ + struct v4l2_control ctrl; + struct videobuf_dvb_frontend *vfe; + struct dvb_frontend *fe; + + struct analog_parameters params = { + .mode = V4L2_TUNER_ANALOG_TV, + .audmode = V4L2_TUNER_MODE_STEREO, + .std = dev->tvnorm, + .frequency = f->frequency + }; + + mutex_lock(&dev->lock); + dev->freq = f->frequency; + + /* I need to mute audio here */ + ctrl.id = V4L2_CID_AUDIO_MUTE; + ctrl.value = 1; + cx23885_set_control(dev, &ctrl); + + /* If HVR1850 */ + dprintk(1, "%s() frequency=%d tuner=%d std=0x%llx\n", __func__, + params.frequency, f->tuner, params.std); + + vfe = videobuf_dvb_get_frontend(&dev->ts2.frontends, 1); + if (!vfe) { + mutex_unlock(&dev->lock); + return -EINVAL; + } + + fe = vfe->dvb.frontend; + + if ((dev->board == CX23885_BOARD_HAUPPAUGE_HVR1850) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255) || + (dev->board == CX23885_BOARD_HAUPPAUGE_HVR1255_22111)) + fe = &dev->ts1.analog_fe; + + if (fe && fe->ops.tuner_ops.set_analog_params) { + call_all(dev, core, s_std, dev->tvnorm); + fe->ops.tuner_ops.set_analog_params(fe, ¶ms); + } + else + printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__); + + /* When changing channels it is required to reset TVAUDIO */ + msleep(100); + + /* I need to unmute audio here */ + ctrl.value = 0; + cx23885_set_control(dev, &ctrl); + + mutex_unlock(&dev->lock); + + return 0; +} + +int cx23885_set_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + struct cx23885_fh *fh = priv; + struct cx23885_dev *dev = fh->dev; + int ret; + + switch (dev->board) { + case CX23885_BOARD_HAUPPAUGE_HVR1255: + case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: + case CX23885_BOARD_HAUPPAUGE_HVR1850: + ret = cx23885_set_freq_via_ops(dev, f); + break; + default: + ret = cx23885_set_freq(dev, f); + } + + return ret; +} + +static int vidioc_s_frequency(struct file *file, void *priv, + struct v4l2_frequency *f) +{ + return cx23885_set_frequency(file, priv, f); +} + +/* ----------------------------------------------------------- */ + +static void cx23885_vid_timeout(unsigned long data) +{ + struct cx23885_dev *dev = (struct cx23885_dev *)data; + struct cx23885_dmaqueue *q = &dev->vidq; + struct cx23885_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&dev->slock, flags); + while (!list_empty(&q->active)) { + buf = list_entry(q->active.next, + struct cx23885_buffer, vb.queue); + list_del(&buf->vb.queue); + buf->vb.state = VIDEOBUF_ERROR; + wake_up(&buf->vb.done); + printk(KERN_ERR "%s: [%p/%d] timeout - dma=0x%08lx\n", + dev->name, buf, buf->vb.i, + (unsigned long)buf->risc.dma); + } + cx23885_restart_video_queue(dev, q); + spin_unlock_irqrestore(&dev->slock, flags); +} + +int cx23885_video_irq(struct cx23885_dev *dev, u32 status) +{ + u32 mask, count; + int handled = 0; + + mask = cx_read(VID_A_INT_MSK); + if (0 == (status & mask)) + return handled; + + cx_write(VID_A_INT_STAT, status); + + /* risc op code error, fifo overflow or line sync detection error */ + if ((status & VID_BC_MSK_OPC_ERR) || + (status & VID_BC_MSK_SYNC) || + (status & VID_BC_MSK_OF)) { + + if (status & VID_BC_MSK_OPC_ERR) { + dprintk(7, " (VID_BC_MSK_OPC_ERR 0x%08x)\n", + VID_BC_MSK_OPC_ERR); + printk(KERN_WARNING "%s: video risc op code error\n", + dev->name); + cx23885_sram_channel_dump(dev, + &dev->sram_channels[SRAM_CH01]); + } + + if (status & VID_BC_MSK_SYNC) + dprintk(7, " (VID_BC_MSK_SYNC 0x%08x) " + "video lines miss-match\n", + VID_BC_MSK_SYNC); + + if (status & VID_BC_MSK_OF) + dprintk(7, " (VID_BC_MSK_OF 0x%08x) fifo overflow\n", + VID_BC_MSK_OF); + + } + + /* Video */ + if (status & VID_BC_MSK_RISCI1) { + spin_lock(&dev->slock); + count = cx_read(VID_A_GPCNT); + cx23885_video_wakeup(dev, &dev->vidq, count); + spin_unlock(&dev->slock); + handled++; + } + if (status & VID_BC_MSK_RISCI2) { + dprintk(2, "stopper video\n"); + spin_lock(&dev->slock); + cx23885_restart_video_queue(dev, &dev->vidq); + spin_unlock(&dev->slock); + handled++; + } + + /* Allow the VBI framework to process it's payload */ + handled += cx23885_vbi_irq(dev, status); + + return handled; +} + +/* ----------------------------------------------------------- */ +/* exported stuff */ + +static const struct v4l2_file_operations video_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .read = video_read, + .poll = video_poll, + .mmap = video_mmap, + .ioctl = video_ioctl2, +}; + +static const struct v4l2_ioctl_ops video_ioctl_ops = { + .vidioc_querycap = vidioc_querycap, + .vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap, + .vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap, + .vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap, + .vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap, + .vidioc_g_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_try_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_s_fmt_vbi_cap = cx23885_vbi_fmt, + .vidioc_reqbufs = vidioc_reqbufs, + .vidioc_querybuf = vidioc_querybuf, + .vidioc_qbuf = vidioc_qbuf, + .vidioc_dqbuf = vidioc_dqbuf, + .vidioc_s_std = vidioc_s_std, + .vidioc_g_std = vidioc_g_std, + .vidioc_querystd = vidioc_g_std, + .vidioc_enum_input = vidioc_enum_input, + .vidioc_g_input = vidioc_g_input, + .vidioc_s_input = vidioc_s_input, + .vidioc_log_status = vidioc_log_status, + .vidioc_queryctrl = vidioc_queryctrl, + .vidioc_g_ctrl = vidioc_g_ctrl, + .vidioc_s_ctrl = vidioc_s_ctrl, + .vidioc_streamon = vidioc_streamon, + .vidioc_streamoff = vidioc_streamoff, + .vidioc_g_tuner = vidioc_g_tuner, + .vidioc_s_tuner = vidioc_s_tuner, + .vidioc_g_frequency = vidioc_g_frequency, + .vidioc_s_frequency = vidioc_s_frequency, + .vidioc_g_chip_ident = cx23885_g_chip_ident, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .vidioc_g_register = cx23885_g_register, + .vidioc_s_register = cx23885_s_register, +#endif + .vidioc_enumaudio = vidioc_enum_audinput, + .vidioc_g_audio = vidioc_g_audinput, + .vidioc_s_audio = vidioc_s_audinput, +}; + +static struct video_device cx23885_vbi_template; +static struct video_device cx23885_video_template = { + .name = "cx23885-video", + .fops = &video_fops, + .ioctl_ops = &video_ioctl_ops, + .tvnorms = CX23885_NORMS, + .current_norm = V4L2_STD_NTSC_M, +}; + +static const struct v4l2_file_operations radio_fops = { + .owner = THIS_MODULE, + .open = video_open, + .release = video_release, + .ioctl = video_ioctl2, +}; + + +void cx23885_video_unregister(struct cx23885_dev *dev) +{ + dprintk(1, "%s()\n", __func__); + cx23885_irq_remove(dev, 0x01); + + if (dev->vbi_dev) { + if (video_is_registered(dev->vbi_dev)) + video_unregister_device(dev->vbi_dev); + else + video_device_release(dev->vbi_dev); + dev->vbi_dev = NULL; + btcx_riscmem_free(dev->pci, &dev->vbiq.stopper); + } + if (dev->video_dev) { + if (video_is_registered(dev->video_dev)) + video_unregister_device(dev->video_dev); + else + video_device_release(dev->video_dev); + dev->video_dev = NULL; + + btcx_riscmem_free(dev->pci, &dev->vidq.stopper); + } + + if (dev->audio_dev) + cx23885_audio_unregister(dev); +} + +int cx23885_video_register(struct cx23885_dev *dev) +{ + int err; + + dprintk(1, "%s()\n", __func__); + spin_lock_init(&dev->slock); + + /* Initialize VBI template */ + memcpy(&cx23885_vbi_template, &cx23885_video_template, + sizeof(cx23885_vbi_template)); + strcpy(cx23885_vbi_template.name, "cx23885-vbi"); + + dev->tvnorm = cx23885_video_template.current_norm; + + /* init video dma queues */ + INIT_LIST_HEAD(&dev->vidq.active); + INIT_LIST_HEAD(&dev->vidq.queued); + dev->vidq.timeout.function = cx23885_vid_timeout; + dev->vidq.timeout.data = (unsigned long)dev; + init_timer(&dev->vidq.timeout); + cx23885_risc_stopper(dev->pci, &dev->vidq.stopper, + VID_A_DMA_CTL, 0x11, 0x00); + + /* init vbi dma queues */ + INIT_LIST_HEAD(&dev->vbiq.active); + INIT_LIST_HEAD(&dev->vbiq.queued); + dev->vbiq.timeout.function = cx23885_vbi_timeout; + dev->vbiq.timeout.data = (unsigned long)dev; + init_timer(&dev->vbiq.timeout); + cx23885_risc_stopper(dev->pci, &dev->vbiq.stopper, + VID_A_DMA_CTL, 0x22, 0x00); + + cx23885_irq_add_enable(dev, 0x01); + + if ((TUNER_ABSENT != dev->tuner_type) && + ((dev->tuner_bus == 0) || (dev->tuner_bus == 1))) { + struct v4l2_subdev *sd = NULL; + + if (dev->tuner_addr) + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, + "tuner", dev->tuner_addr, NULL); + else + sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, + &dev->i2c_bus[dev->tuner_bus].i2c_adap, + "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV)); + if (sd) { + struct tuner_setup tun_setup; + + memset(&tun_setup, 0, sizeof(tun_setup)); + tun_setup.mode_mask = T_ANALOG_TV; + tun_setup.type = dev->tuner_type; + tun_setup.addr = v4l2_i2c_subdev_addr(sd); + tun_setup.tuner_callback = cx23885_tuner_callback; + + v4l2_subdev_call(sd, tuner, s_type_addr, &tun_setup); + + if (dev->board == CX23885_BOARD_LEADTEK_WINFAST_PXTV1200) { + struct xc2028_ctrl ctrl = { + .fname = XC2028_DEFAULT_FIRMWARE, + .max_len = 64 + }; + struct v4l2_priv_tun_config cfg = { + .tuner = dev->tuner_type, + .priv = &ctrl + }; + v4l2_subdev_call(sd, tuner, s_config, &cfg); + } + } + } + + /* register Video device */ + dev->video_dev = cx23885_vdev_init(dev, dev->pci, + &cx23885_video_template, "video"); + err = video_register_device(dev->video_dev, VFL_TYPE_GRABBER, + video_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register video device\n", + dev->name); + goto fail_unreg; + } + printk(KERN_INFO "%s: registered device %s [v4l2]\n", + dev->name, video_device_node_name(dev->video_dev)); + + /* register VBI device */ + dev->vbi_dev = cx23885_vdev_init(dev, dev->pci, + &cx23885_vbi_template, "vbi"); + err = video_register_device(dev->vbi_dev, VFL_TYPE_VBI, + vbi_nr[dev->nr]); + if (err < 0) { + printk(KERN_INFO "%s: can't register vbi device\n", + dev->name); + goto fail_unreg; + } + printk(KERN_INFO "%s: registered device %s\n", + dev->name, video_device_node_name(dev->vbi_dev)); + + /* Register ALSA audio device */ + dev->audio_dev = cx23885_audio_register(dev); + + /* initial device configuration */ + mutex_lock(&dev->lock); + cx23885_set_tvnorm(dev, dev->tvnorm); + init_controls(dev); + cx23885_video_mux(dev, 0); + cx23885_audio_mux(dev, 0); + mutex_unlock(&dev->lock); + + return 0; + +fail_unreg: + cx23885_video_unregister(dev); + return err; +} + diff --git a/drivers/media/pci/cx23885/cx23885.h b/drivers/media/pci/cx23885/cx23885.h new file mode 100644 index 00000000000..5d560c747e0 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23885.h @@ -0,0 +1,653 @@ +/* + * Driver for the Conexant CX23885 PCIe bridge + * + * Copyright (c) 2006 Steven Toth <stoth@linuxtv.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/kdev_t.h> +#include <linux/slab.h> + +#include <media/v4l2-device.h> +#include <media/tuner.h> +#include <media/tveeprom.h> +#include <media/videobuf-dma-sg.h> +#include <media/videobuf-dvb.h> +#include <media/rc-core.h> + +#include "btcx-risc.h" +#include "cx23885-reg.h" +#include "media/cx2341x.h" + +#include <linux/mutex.h> + +#define CX23885_VERSION "0.0.3" + +#define UNSET (-1U) + +#define CX23885_MAXBOARDS 8 + +/* Max number of inputs by card */ +#define MAX_CX23885_INPUT 8 +#define INPUT(nr) (&cx23885_boards[dev->board].input[nr]) +#define RESOURCE_OVERLAY 1 +#define RESOURCE_VIDEO 2 +#define RESOURCE_VBI 4 + +#define BUFFER_TIMEOUT (HZ) /* 0.5 seconds */ + +#define CX23885_BOARD_NOAUTO UNSET +#define CX23885_BOARD_UNKNOWN 0 +#define CX23885_BOARD_HAUPPAUGE_HVR1800lp 1 +#define CX23885_BOARD_HAUPPAUGE_HVR1800 2 +#define CX23885_BOARD_HAUPPAUGE_HVR1250 3 +#define CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP 4 +#define CX23885_BOARD_HAUPPAUGE_HVR1500Q 5 +#define CX23885_BOARD_HAUPPAUGE_HVR1500 6 +#define CX23885_BOARD_HAUPPAUGE_HVR1200 7 +#define CX23885_BOARD_HAUPPAUGE_HVR1700 8 +#define CX23885_BOARD_HAUPPAUGE_HVR1400 9 +#define CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP 10 +#define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP 11 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H 12 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E650F 13 +#define CX23885_BOARD_TBS_6920 14 +#define CX23885_BOARD_TEVII_S470 15 +#define CX23885_BOARD_DVBWORLD_2005 16 +#define CX23885_BOARD_NETUP_DUAL_DVBS2_CI 17 +#define CX23885_BOARD_HAUPPAUGE_HVR1270 18 +#define CX23885_BOARD_HAUPPAUGE_HVR1275 19 +#define CX23885_BOARD_HAUPPAUGE_HVR1255 20 +#define CX23885_BOARD_HAUPPAUGE_HVR1210 21 +#define CX23885_BOARD_MYGICA_X8506 22 +#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23 +#define CX23885_BOARD_HAUPPAUGE_HVR1850 24 +#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25 +#define CX23885_BOARD_HAUPPAUGE_HVR1290 26 +#define CX23885_BOARD_MYGICA_X8558PRO 27 +#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28 +#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29 +#define CX23885_BOARD_NETUP_DUAL_DVB_T_C_CI_RF 30 +#define CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H_XC4000 31 +#define CX23885_BOARD_MPX885 32 +#define CX23885_BOARD_MYGICA_X8507 33 +#define CX23885_BOARD_TERRATEC_CINERGY_T_PCIE_DUAL 34 +#define CX23885_BOARD_TEVII_S471 35 +#define CX23885_BOARD_HAUPPAUGE_HVR1255_22111 36 + +#define GPIO_0 0x00000001 +#define GPIO_1 0x00000002 +#define GPIO_2 0x00000004 +#define GPIO_3 0x00000008 +#define GPIO_4 0x00000010 +#define GPIO_5 0x00000020 +#define GPIO_6 0x00000040 +#define GPIO_7 0x00000080 +#define GPIO_8 0x00000100 +#define GPIO_9 0x00000200 +#define GPIO_10 0x00000400 +#define GPIO_11 0x00000800 +#define GPIO_12 0x00001000 +#define GPIO_13 0x00002000 +#define GPIO_14 0x00004000 +#define GPIO_15 0x00008000 + +/* Currently unsupported by the driver: PAL/H, NTSC/Kr, SECAM B/G/H/LC */ +#define CX23885_NORMS (\ + V4L2_STD_NTSC_M | V4L2_STD_NTSC_M_JP | V4L2_STD_NTSC_443 | \ + V4L2_STD_PAL_BG | V4L2_STD_PAL_DK | V4L2_STD_PAL_I | \ + V4L2_STD_PAL_M | V4L2_STD_PAL_N | V4L2_STD_PAL_Nc | \ + V4L2_STD_PAL_60 | V4L2_STD_SECAM_L | V4L2_STD_SECAM_DK) + +struct cx23885_fmt { + char *name; + u32 fourcc; /* v4l2 format id */ + int depth; + int flags; + u32 cxformat; +}; + +struct cx23885_ctrl { + struct v4l2_queryctrl v; + u32 off; + u32 reg; + u32 mask; + u32 shift; +}; + +struct cx23885_tvnorm { + char *name; + v4l2_std_id id; + u32 cxiformat; + u32 cxoformat; +}; + +struct cx23885_fh { + struct cx23885_dev *dev; + enum v4l2_buf_type type; + int radio; + u32 resources; + + /* video overlay */ + struct v4l2_window win; + struct v4l2_clip *clips; + unsigned int nclips; + + /* video capture */ + struct cx23885_fmt *fmt; + unsigned int width, height; + + /* vbi capture */ + struct videobuf_queue vidq; + struct videobuf_queue vbiq; + + /* MPEG Encoder specifics ONLY */ + struct videobuf_queue mpegq; + atomic_t v4l_reading; +}; + +enum cx23885_itype { + CX23885_VMUX_COMPOSITE1 = 1, + CX23885_VMUX_COMPOSITE2, + CX23885_VMUX_COMPOSITE3, + CX23885_VMUX_COMPOSITE4, + CX23885_VMUX_SVIDEO, + CX23885_VMUX_COMPONENT, + CX23885_VMUX_TELEVISION, + CX23885_VMUX_CABLE, + CX23885_VMUX_DVB, + CX23885_VMUX_DEBUG, + CX23885_RADIO, +}; + +enum cx23885_src_sel_type { + CX23885_SRC_SEL_EXT_656_VIDEO = 0, + CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO +}; + +/* buffer for one video frame */ +struct cx23885_buffer { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* cx23885 specific */ + unsigned int bpl; + struct btcx_riscmem risc; + struct cx23885_fmt *fmt; + u32 count; +}; + +struct cx23885_input { + enum cx23885_itype type; + unsigned int vmux; + unsigned int amux; + u32 gpio0, gpio1, gpio2, gpio3; +}; + +typedef enum { + CX23885_MPEG_UNDEFINED = 0, + CX23885_MPEG_DVB, + CX23885_ANALOG_VIDEO, + CX23885_MPEG_ENCODER, +} port_t; + +struct cx23885_board { + char *name; + port_t porta, portb, portc; + int num_fds_portb, num_fds_portc; + unsigned int tuner_type; + unsigned int radio_type; + unsigned char tuner_addr; + unsigned char radio_addr; + unsigned int tuner_bus; + + /* Vendors can and do run the PCIe bridge at different + * clock rates, driven physically by crystals on the PCBs. + * The core has to accommodate this. This allows the user + * to add new boards with new frequencys. The value is + * expressed in Hz. + * + * The core framework will default this value based on + * current designs, but it can vary. + */ + u32 clk_freq; + struct cx23885_input input[MAX_CX23885_INPUT]; + int ci_type; /* for NetUP */ + /* Force bottom field first during DMA (888 workaround) */ + u32 force_bff; +}; + +struct cx23885_subid { + u16 subvendor; + u16 subdevice; + u32 card; +}; + +struct cx23885_i2c { + struct cx23885_dev *dev; + + int nr; + + /* i2c i/o */ + struct i2c_adapter i2c_adap; + struct i2c_client i2c_client; + u32 i2c_rc; + + /* 885 registers used for raw addess */ + u32 i2c_period; + u32 reg_ctrl; + u32 reg_stat; + u32 reg_addr; + u32 reg_rdata; + u32 reg_wdata; +}; + +struct cx23885_dmaqueue { + struct list_head active; + struct list_head queued; + struct timer_list timeout; + struct btcx_riscmem stopper; + u32 count; +}; + +struct cx23885_tsport { + struct cx23885_dev *dev; + + int nr; + int sram_chno; + + struct videobuf_dvb_frontends frontends; + + /* dma queues */ + struct cx23885_dmaqueue mpegq; + u32 ts_packet_size; + u32 ts_packet_count; + + int width; + int height; + + spinlock_t slock; + + /* registers */ + u32 reg_gpcnt; + u32 reg_gpcnt_ctl; + u32 reg_dma_ctl; + u32 reg_lngth; + u32 reg_hw_sop_ctrl; + u32 reg_gen_ctrl; + u32 reg_bd_pkt_status; + u32 reg_sop_status; + u32 reg_fifo_ovfl_stat; + u32 reg_vld_misc; + u32 reg_ts_clk_en; + u32 reg_ts_int_msk; + u32 reg_ts_int_stat; + u32 reg_src_sel; + + /* Default register vals */ + int pci_irqmask; + u32 dma_ctl_val; + u32 ts_int_msk_val; + u32 gen_ctrl_val; + u32 ts_clk_en_val; + u32 src_sel_val; + u32 vld_misc_val; + u32 hw_sop_ctrl_val; + + /* Allow a single tsport to have multiple frontends */ + u32 num_frontends; + void (*gate_ctrl)(struct cx23885_tsport *port, int open); + void *port_priv; + + /* Workaround for a temp dvb_frontend that the tuner can attached to */ + struct dvb_frontend analog_fe; +}; + +struct cx23885_kernel_ir { + struct cx23885_dev *cx; + char *name; + char *phys; + + struct rc_dev *rc; +}; + +struct cx23885_audio_buffer { + unsigned int bpl; + struct btcx_riscmem risc; + struct videobuf_dmabuf dma; +}; + +struct cx23885_audio_dev { + struct cx23885_dev *dev; + + struct pci_dev *pci; + + struct snd_card *card; + + spinlock_t lock; + + atomic_t count; + + unsigned int dma_size; + unsigned int period_size; + unsigned int num_periods; + + struct videobuf_dmabuf *dma_risc; + + struct cx23885_audio_buffer *buf; + + struct snd_pcm_substream *substream; +}; + +struct cx23885_dev { + atomic_t refcount; + struct v4l2_device v4l2_dev; + + /* pci stuff */ + struct pci_dev *pci; + unsigned char pci_rev, pci_lat; + int pci_bus, pci_slot; + u32 __iomem *lmmio; + u8 __iomem *bmmio; + int pci_irqmask; + spinlock_t pci_irqmask_lock; /* protects mask reg too */ + int hwrevision; + + /* This valud is board specific and is used to configure the + * AV core so we see nice clean and stable video and audio. */ + u32 clk_freq; + + /* I2C adapters: Master 1 & 2 (External) & Master 3 (Internal only) */ + struct cx23885_i2c i2c_bus[3]; + + int nr; + struct mutex lock; + struct mutex gpio_lock; + + /* board details */ + unsigned int board; + char name[32]; + + struct cx23885_tsport ts1, ts2; + + /* sram configuration */ + struct sram_channel *sram_channels; + + enum { + CX23885_BRIDGE_UNDEFINED = 0, + CX23885_BRIDGE_885 = 885, + CX23885_BRIDGE_887 = 887, + CX23885_BRIDGE_888 = 888, + } bridge; + + /* Analog video */ + u32 resources; + unsigned int input; + unsigned int audinput; /* Selectable audio input */ + u32 tvaudio; + v4l2_std_id tvnorm; + unsigned int tuner_type; + unsigned char tuner_addr; + unsigned int tuner_bus; + unsigned int radio_type; + unsigned char radio_addr; + unsigned int has_radio; + struct v4l2_subdev *sd_cx25840; + struct work_struct cx25840_work; + + /* Infrared */ + struct v4l2_subdev *sd_ir; + struct work_struct ir_rx_work; + unsigned long ir_rx_notifications; + struct work_struct ir_tx_work; + unsigned long ir_tx_notifications; + + struct cx23885_kernel_ir *kernel_ir; + atomic_t ir_input_stopping; + + /* V4l */ + u32 freq; + struct video_device *video_dev; + struct video_device *vbi_dev; + struct video_device *radio_dev; + + struct cx23885_dmaqueue vidq; + struct cx23885_dmaqueue vbiq; + spinlock_t slock; + + /* MPEG Encoder ONLY settings */ + u32 cx23417_mailbox; + struct cx2341x_mpeg_params mpeg_params; + struct video_device *v4l_device; + atomic_t v4l_reader_count; + struct cx23885_tvnorm encodernorm; + + /* Analog raw audio */ + struct cx23885_audio_dev *audio_dev; + +}; + +static inline struct cx23885_dev *to_cx23885(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct cx23885_dev, v4l2_dev); +} + +#define call_all(dev, o, f, args...) \ + v4l2_device_call_all(&dev->v4l2_dev, 0, o, f, ##args) + +#define CX23885_HW_888_IR (1 << 0) +#define CX23885_HW_AV_CORE (1 << 1) + +#define call_hw(dev, grpid, o, f, args...) \ + v4l2_device_call_all(&dev->v4l2_dev, grpid, o, f, ##args) + +extern struct v4l2_subdev *cx23885_find_hw(struct cx23885_dev *dev, u32 hw); + +#define SRAM_CH01 0 /* Video A */ +#define SRAM_CH02 1 /* VBI A */ +#define SRAM_CH03 2 /* Video B */ +#define SRAM_CH04 3 /* Transport via B */ +#define SRAM_CH05 4 /* VBI B */ +#define SRAM_CH06 5 /* Video C */ +#define SRAM_CH07 6 /* Transport via C */ +#define SRAM_CH08 7 /* Audio Internal A */ +#define SRAM_CH09 8 /* Audio Internal B */ +#define SRAM_CH10 9 /* Audio External */ +#define SRAM_CH11 10 /* COMB_3D_N */ +#define SRAM_CH12 11 /* Comb 3D N1 */ +#define SRAM_CH13 12 /* Comb 3D N2 */ +#define SRAM_CH14 13 /* MOE Vid */ +#define SRAM_CH15 14 /* MOE RSLT */ + +struct sram_channel { + char *name; + u32 cmds_start; + u32 ctrl_start; + u32 cdt; + u32 fifo_start; + u32 fifo_size; + u32 ptr1_reg; + u32 ptr2_reg; + u32 cnt1_reg; + u32 cnt2_reg; + u32 jumponly; +}; + +/* ----------------------------------------------------------- */ + +#define cx_read(reg) readl(dev->lmmio + ((reg)>>2)) +#define cx_write(reg, value) writel((value), dev->lmmio + ((reg)>>2)) + +#define cx_andor(reg, mask, value) \ + writel((readl(dev->lmmio+((reg)>>2)) & ~(mask)) |\ + ((value) & (mask)), dev->lmmio+((reg)>>2)) + +#define cx_set(reg, bit) cx_andor((reg), (bit), (bit)) +#define cx_clear(reg, bit) cx_andor((reg), (bit), 0) + +/* ----------------------------------------------------------- */ +/* cx23885-core.c */ + +extern int cx23885_sram_channel_setup(struct cx23885_dev *dev, + struct sram_channel *ch, + unsigned int bpl, u32 risc); + +extern void cx23885_sram_channel_dump(struct cx23885_dev *dev, + struct sram_channel *ch); + +extern int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, + u32 reg, u32 mask, u32 value); + +extern int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); + +extern int cx23885_risc_vbibuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, struct scatterlist *sglist, + unsigned int top_offset, unsigned int bottom_offset, + unsigned int bpl, unsigned int padding, unsigned int lines); + +void cx23885_cancel_buffers(struct cx23885_tsport *port); + +extern int cx23885_restart_queue(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q); + +extern void cx23885_wakeup(struct cx23885_tsport *port, + struct cx23885_dmaqueue *q, u32 count); + +extern void cx23885_gpio_set(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_clear(struct cx23885_dev *dev, u32 mask); +extern u32 cx23885_gpio_get(struct cx23885_dev *dev, u32 mask); +extern void cx23885_gpio_enable(struct cx23885_dev *dev, u32 mask, + int asoutput); + +extern void cx23885_irq_add_enable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_enable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_disable(struct cx23885_dev *dev, u32 mask); +extern void cx23885_irq_remove(struct cx23885_dev *dev, u32 mask); + +/* ----------------------------------------------------------- */ +/* cx23885-cards.c */ +extern struct cx23885_board cx23885_boards[]; +extern const unsigned int cx23885_bcount; + +extern struct cx23885_subid cx23885_subids[]; +extern const unsigned int cx23885_idcount; + +extern int cx23885_tuner_callback(void *priv, int component, + int command, int arg); +extern void cx23885_card_list(struct cx23885_dev *dev); +extern int cx23885_ir_init(struct cx23885_dev *dev); +extern void cx23885_ir_pci_int_enable(struct cx23885_dev *dev); +extern void cx23885_ir_fini(struct cx23885_dev *dev); +extern void cx23885_gpio_setup(struct cx23885_dev *dev); +extern void cx23885_card_setup(struct cx23885_dev *dev); +extern void cx23885_card_setup_pre_i2c(struct cx23885_dev *dev); + +extern int cx23885_dvb_register(struct cx23885_tsport *port); +extern int cx23885_dvb_unregister(struct cx23885_tsport *port); + +extern int cx23885_buf_prepare(struct videobuf_queue *q, + struct cx23885_tsport *port, + struct cx23885_buffer *buf, + enum v4l2_field field); +extern void cx23885_buf_queue(struct cx23885_tsport *port, + struct cx23885_buffer *buf); +extern void cx23885_free_buffer(struct videobuf_queue *q, + struct cx23885_buffer *buf); + +/* ----------------------------------------------------------- */ +/* cx23885-video.c */ +/* Video */ +extern int cx23885_video_register(struct cx23885_dev *dev); +extern void cx23885_video_unregister(struct cx23885_dev *dev); +extern int cx23885_video_irq(struct cx23885_dev *dev, u32 status); +extern void cx23885_video_wakeup(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q, u32 count); +int cx23885_enum_input(struct cx23885_dev *dev, struct v4l2_input *i); +int cx23885_set_input(struct file *file, void *priv, unsigned int i); +int cx23885_get_input(struct file *file, void *priv, unsigned int *i); +int cx23885_set_frequency(struct file *file, void *priv, struct v4l2_frequency *f); +int cx23885_set_control(struct cx23885_dev *dev, struct v4l2_control *ctl); +int cx23885_get_control(struct cx23885_dev *dev, struct v4l2_control *ctl); +int cx23885_set_tvnorm(struct cx23885_dev *dev, v4l2_std_id norm); + +/* ----------------------------------------------------------- */ +/* cx23885-vbi.c */ +extern int cx23885_vbi_fmt(struct file *file, void *priv, + struct v4l2_format *f); +extern void cx23885_vbi_timeout(unsigned long data); +extern struct videobuf_queue_ops cx23885_vbi_qops; +extern int cx23885_restart_vbi_queue(struct cx23885_dev *dev, + struct cx23885_dmaqueue *q); +extern int cx23885_vbi_irq(struct cx23885_dev *dev, u32 status); + +/* cx23885-i2c.c */ +extern int cx23885_i2c_register(struct cx23885_i2c *bus); +extern int cx23885_i2c_unregister(struct cx23885_i2c *bus); +extern void cx23885_av_clk(struct cx23885_dev *dev, int enable); + +/* ----------------------------------------------------------- */ +/* cx23885-417.c */ +extern int cx23885_417_register(struct cx23885_dev *dev); +extern void cx23885_417_unregister(struct cx23885_dev *dev); +extern int cx23885_irq_417(struct cx23885_dev *dev, u32 status); +extern void cx23885_417_check_encoder(struct cx23885_dev *dev); +extern void cx23885_mc417_init(struct cx23885_dev *dev); +extern int mc417_memory_read(struct cx23885_dev *dev, u32 address, u32 *value); +extern int mc417_memory_write(struct cx23885_dev *dev, u32 address, u32 value); +extern int mc417_register_read(struct cx23885_dev *dev, + u16 address, u32 *value); +extern int mc417_register_write(struct cx23885_dev *dev, + u16 address, u32 value); +extern void mc417_gpio_set(struct cx23885_dev *dev, u32 mask); +extern void mc417_gpio_clear(struct cx23885_dev *dev, u32 mask); +extern void mc417_gpio_enable(struct cx23885_dev *dev, u32 mask, int asoutput); + +/* ----------------------------------------------------------- */ +/* cx23885-alsa.c */ +extern struct cx23885_audio_dev *cx23885_audio_register( + struct cx23885_dev *dev); +extern void cx23885_audio_unregister(struct cx23885_dev *dev); +extern int cx23885_audio_irq(struct cx23885_dev *dev, u32 status, u32 mask); +extern int cx23885_risc_databuffer(struct pci_dev *pci, + struct btcx_riscmem *risc, + struct scatterlist *sglist, + unsigned int bpl, + unsigned int lines, + unsigned int lpi); + +/* ----------------------------------------------------------- */ +/* tv norms */ + +static inline unsigned int norm_maxw(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 720 : 768; +} + +static inline unsigned int norm_maxh(v4l2_std_id norm) +{ + return (norm & V4L2_STD_625_50) ? 576 : 480; +} + +static inline unsigned int norm_swidth(v4l2_std_id norm) +{ + return (norm & (V4L2_STD_MN & ~V4L2_STD_PAL_Nc)) ? 754 : 922; +} diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c new file mode 100644 index 00000000000..c2bc39c58f8 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -0,0 +1,1271 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * CX23888 Integrated Consumer Infrared Controller + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#include <linux/kfifo.h> +#include <linux/slab.h> + +#include <media/v4l2-device.h> +#include <media/v4l2-chip-ident.h> +#include <media/rc-core.h> + +#include "cx23885.h" + +static unsigned int ir_888_debug; +module_param(ir_888_debug, int, 0644); +MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]"); + +#define CX23888_IR_REG_BASE 0x170000 +/* + * These CX23888 register offsets have a straightforward one to one mapping + * to the CX23885 register offsets of 0x200 through 0x218 + */ +#define CX23888_IR_CNTRL_REG 0x170000 +#define CNTRL_WIN_3_3 0x00000000 +#define CNTRL_WIN_4_3 0x00000001 +#define CNTRL_WIN_3_4 0x00000002 +#define CNTRL_WIN_4_4 0x00000003 +#define CNTRL_WIN 0x00000003 +#define CNTRL_EDG_NONE 0x00000000 +#define CNTRL_EDG_FALL 0x00000004 +#define CNTRL_EDG_RISE 0x00000008 +#define CNTRL_EDG_BOTH 0x0000000C +#define CNTRL_EDG 0x0000000C +#define CNTRL_DMD 0x00000010 +#define CNTRL_MOD 0x00000020 +#define CNTRL_RFE 0x00000040 +#define CNTRL_TFE 0x00000080 +#define CNTRL_RXE 0x00000100 +#define CNTRL_TXE 0x00000200 +#define CNTRL_RIC 0x00000400 +#define CNTRL_TIC 0x00000800 +#define CNTRL_CPL 0x00001000 +#define CNTRL_LBM 0x00002000 +#define CNTRL_R 0x00004000 +/* CX23888 specific control flag */ +#define CNTRL_IVO 0x00008000 + +#define CX23888_IR_TXCLK_REG 0x170004 +#define TXCLK_TCD 0x0000FFFF + +#define CX23888_IR_RXCLK_REG 0x170008 +#define RXCLK_RCD 0x0000FFFF + +#define CX23888_IR_CDUTY_REG 0x17000C +#define CDUTY_CDC 0x0000000F + +#define CX23888_IR_STATS_REG 0x170010 +#define STATS_RTO 0x00000001 +#define STATS_ROR 0x00000002 +#define STATS_RBY 0x00000004 +#define STATS_TBY 0x00000008 +#define STATS_RSR 0x00000010 +#define STATS_TSR 0x00000020 + +#define CX23888_IR_IRQEN_REG 0x170014 +#define IRQEN_RTE 0x00000001 +#define IRQEN_ROE 0x00000002 +#define IRQEN_RSE 0x00000010 +#define IRQEN_TSE 0x00000020 + +#define CX23888_IR_FILTR_REG 0x170018 +#define FILTR_LPF 0x0000FFFF + +/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */ +#define CX23888_IR_FIFO_REG 0x170040 +#define FIFO_RXTX 0x0000FFFF +#define FIFO_RXTX_LVL 0x00010000 +#define FIFO_RXTX_RTO 0x0001FFFF +#define FIFO_RX_NDV 0x00020000 +#define FIFO_RX_DEPTH 8 +#define FIFO_TX_DEPTH 8 + +/* CX23888 unique registers */ +#define CX23888_IR_SEEDP_REG 0x17001C +#define CX23888_IR_TIMOL_REG 0x170020 +#define CX23888_IR_WAKE0_REG 0x170024 +#define CX23888_IR_WAKE1_REG 0x170028 +#define CX23888_IR_WAKE2_REG 0x17002C +#define CX23888_IR_MASK0_REG 0x170030 +#define CX23888_IR_MASK1_REG 0x170034 +#define CX23888_IR_MAKS2_REG 0x170038 +#define CX23888_IR_DPIPG_REG 0x17003C +#define CX23888_IR_LEARN_REG 0x170044 + +#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */ +#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2) + +/* + * We use this union internally for convenience, but callers to tx_write + * and rx_read will be expecting records of type struct ir_raw_event. + * Always ensure the size of this union is dictated by struct ir_raw_event. + */ +union cx23888_ir_fifo_rec { + u32 hw_fifo_data; + struct ir_raw_event ir_core_data; +}; + +#define CX23888_IR_RX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec)) +#define CX23888_IR_TX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec)) + +struct cx23888_ir_state { + struct v4l2_subdev sd; + struct cx23885_dev *dev; + u32 id; + u32 rev; + + struct v4l2_subdev_ir_parameters rx_params; + struct mutex rx_params_lock; + atomic_t rxclk_divider; + atomic_t rx_invert; + + struct kfifo rx_kfifo; + spinlock_t rx_kfifo_lock; + + struct v4l2_subdev_ir_parameters tx_params; + struct mutex tx_params_lock; + atomic_t txclk_divider; +}; + +static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd) +{ + return v4l2_get_subdevdata(sd); +} + +/* + * IR register block read and write functions + */ +static +inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value) +{ + cx_write(addr, value); + return 0; +} + +static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr) +{ + return cx_read(addr); +} + +static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr, + u32 and_mask, u32 or_value) +{ + cx_andor(addr, ~and_mask, or_value); + return 0; +} + +/* + * Rx and Tx Clock Divider register computations + * + * Note the largest clock divider value of 0xffff corresponds to: + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_clock_divider(unsigned int d) +{ + if (d > RXCLK_RCD + 1) + d = RXCLK_RCD; + else if (d < 2) + d = 1; + else + d--; + return (u16) d; +} + +static inline u16 ns_to_clock_divider(unsigned int ns) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int clock_divider_to_ns(unsigned int divider) +{ + /* Period of the Rx or Tx clock in ns */ + return DIV_ROUND_CLOSEST((divider + 1) * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static inline u16 carrier_freq_to_clock_divider(unsigned int freq) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16)); +} + +static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider) +{ + return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16); +} + +static inline u16 freq_to_clock_divider(unsigned int freq, + unsigned int rollovers) +{ + return count_to_clock_divider( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * rollovers)); +} + +static inline unsigned int clock_divider_to_freq(unsigned int divider, + unsigned int rollovers) +{ + return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, + (divider + 1) * rollovers); +} + +/* + * Low Pass Filter register calculations + * + * Note the largest count value of 0xffff corresponds to: + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * which fits in 21 bits, so we'll use unsigned int for time arguments. + */ +static inline u16 count_to_lpf_count(unsigned int d) +{ + if (d > FILTR_LPF) + d = FILTR_LPF; + else if (d < 4) + d = 0; + return (u16) d; +} + +static inline u16 ns_to_lpf_count(unsigned int ns) +{ + return count_to_lpf_count( + DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000)); +} + +static inline unsigned int lpf_count_to_ns(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in ns */ + return DIV_ROUND_CLOSEST(count * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static inline unsigned int lpf_count_to_us(unsigned int count) +{ + /* Duration of the Low Pass Filter rejection window in us */ + return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000); +} + +/* + * FIFO register pulse width count compuations + */ +static u32 clock_divider_to_resolution(u16 divider) +{ + /* + * Resolution is the duration of 1 tick of the readable portion of + * of the pulse width counter as read from the FIFO. The two lsb's are + * not readable, hence the << 2. This function returns ns. + */ + return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000, + CX23888_IR_REFCLK_FREQ / 1000000); +} + +static u64 pulse_width_count_to_ns(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */ + rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */ + if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return n; +} + +static unsigned int pulse_width_count_to_us(u16 count, u16 divider) +{ + u64 n; + u32 rem; + + /* + * The 2 lsb's of the pulse width timer count are not readable, hence + * the (count << 2) | 0x3 + */ + n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */ + rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */ + if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2) + n++; + return (unsigned int) n; +} + +/* + * Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts + * + * The total pulse clock count is an 18 bit pulse width timer count as the most + * significant part and (up to) 16 bit clock divider count as a modulus. + * When the Rx clock divider ticks down to 0, it increments the 18 bit pulse + * width timer count's least significant bit. + */ +static u64 ns_to_pulse_clocks(u32 ns) +{ + u64 clocks; + u32 rem; + clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */ + rem = do_div(clocks, 1000); /* /1000 = cycles */ + if (rem >= 1000 / 2) + clocks++; + return clocks; +} + +static u16 pulse_clocks_to_clock_divider(u64 count) +{ + do_div(count, (FIFO_RXTX << 2) | 0x3); + + /* net result needs to be rounded down and decremented by 1 */ + if (count > RXCLK_RCD + 1) + count = RXCLK_RCD; + else if (count < 2) + count = 1; + else + count--; + return (u16) count; +} + +/* + * IR Control Register helpers + */ +enum tx_fifo_watermark { + TX_FIFO_HALF_EMPTY = 0, + TX_FIFO_EMPTY = CNTRL_TIC, +}; + +enum rx_fifo_watermark { + RX_FIFO_HALF_FULL = 0, + RX_FIFO_NOT_EMPTY = CNTRL_RIC, +}; + +static inline void control_tx_irq_watermark(struct cx23885_dev *dev, + enum tx_fifo_watermark level) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level); +} + +static inline void control_rx_irq_watermark(struct cx23885_dev *dev, + enum rx_fifo_watermark level) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level); +} + +static inline void control_tx_enable(struct cx23885_dev *dev, bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE), + enable ? (CNTRL_TXE | CNTRL_TFE) : 0); +} + +static inline void control_rx_enable(struct cx23885_dev *dev, bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE), + enable ? (CNTRL_RXE | CNTRL_RFE) : 0); +} + +static inline void control_tx_modulation_enable(struct cx23885_dev *dev, + bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD, + enable ? CNTRL_MOD : 0); +} + +static inline void control_rx_demodulation_enable(struct cx23885_dev *dev, + bool enable) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD, + enable ? CNTRL_DMD : 0); +} + +static inline void control_rx_s_edge_detection(struct cx23885_dev *dev, + u32 edge_types) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH, + edge_types & CNTRL_EDG_BOTH); +} + +static void control_rx_s_carrier_window(struct cx23885_dev *dev, + unsigned int carrier, + unsigned int *carrier_range_low, + unsigned int *carrier_range_high) +{ + u32 v; + unsigned int c16 = carrier * 16; + + if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) { + v = CNTRL_WIN_3_4; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4); + } else { + v = CNTRL_WIN_3_3; + *carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3); + } + + if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) { + v |= CNTRL_WIN_4_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4); + } else { + v |= CNTRL_WIN_3_3; + *carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3); + } + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v); +} + +static inline void control_tx_polarity_invert(struct cx23885_dev *dev, + bool invert) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL, + invert ? CNTRL_CPL : 0); +} + +static inline void control_tx_level_invert(struct cx23885_dev *dev, + bool invert) +{ + cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO, + invert ? CNTRL_IVO : 0); +} + +/* + * IR Rx & Tx Clock Register helpers + */ +static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev, + unsigned int freq, + u16 *divider) +{ + *divider = carrier_freq_to_clock_divider(freq); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider); + return clock_divider_to_carrier_freq(*divider); +} + +static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns, + u16 *divider) +{ + u64 pulse_clocks; + + if (ns > IR_MAX_DURATION) + ns = IR_MAX_DURATION; + pulse_clocks = ns_to_pulse_clocks(ns); + *divider = pulse_clocks_to_clock_divider(pulse_clocks); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider); + return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider); +} + +/* + * IR Tx Carrier Duty Cycle register helpers + */ +static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev, + unsigned int duty_cycle) +{ + u32 n; + n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */ + if (n != 0) + n--; + if (n > 15) + n = 15; + cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n); + return DIV_ROUND_CLOSEST((n + 1) * 100, 16); +} + +/* + * IR Filter Register helpers + */ +static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns) +{ + u32 count = ns_to_lpf_count(min_width_ns); + cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count); + return lpf_count_to_ns(count); +} + +/* + * IR IRQ Enable Register helpers + */ +static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask) +{ + mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE); + cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, + ~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask); +} + +static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask) +{ + mask &= IRQEN_TSE; + cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask); +} + +/* + * V4L2 Subdevice IR Ops + */ +static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status, + bool *handled) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + unsigned long flags; + + u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); + u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); + u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG); + + union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH]; + unsigned int i, j, k; + u32 events, v; + int tsr, rsr, rto, ror, tse, rse, rte, roe, kror; + + tsr = stats & STATS_TSR; /* Tx FIFO Service Request */ + rsr = stats & STATS_RSR; /* Rx FIFO Service Request */ + rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */ + ror = stats & STATS_ROR; /* Rx FIFO Over Run */ + + tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */ + rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */ + rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */ + roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */ + + *handled = false; + v4l2_dbg(2, ir_888_debug, sd, "IRQ Status: %s %s %s %s %s %s\n", + tsr ? "tsr" : " ", rsr ? "rsr" : " ", + rto ? "rto" : " ", ror ? "ror" : " ", + stats & STATS_TBY ? "tby" : " ", + stats & STATS_RBY ? "rby" : " "); + + v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n", + tse ? "tse" : " ", rse ? "rse" : " ", + rte ? "rte" : " ", roe ? "roe" : " "); + + /* + * Transmitter interrupt service + */ + if (tse && tsr) { + /* + * TODO: + * Check the watermark threshold setting + * Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo + * Push the data to the hardware FIFO. + * If there was nothing more to send in the tx_kfifo, disable + * the TSR IRQ and notify the v4l2_device. + * If there was something in the tx_kfifo, check the tx_kfifo + * level and notify the v4l2_device, if it is low. + */ + /* For now, inhibit TSR interrupt until Tx is implemented */ + irqenable_tx(dev, 0); + events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ; + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events); + *handled = true; + } + + /* + * Receiver interrupt service + */ + kror = 0; + if ((rse && rsr) || (rte && rto)) { + /* + * Receive data on RSR to clear the STATS_RSR. + * Receive data on RTO, since we may not have yet hit the RSR + * watermark when we receive the RTO. + */ + for (i = 0, v = FIFO_RX_NDV; + (v & FIFO_RX_NDV) && !kror; i = 0) { + for (j = 0; + (v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) { + v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG); + rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV; + i++; + } + if (i == 0) + break; + j = i * sizeof(union cx23888_ir_fifo_rec); + k = kfifo_in_locked(&state->rx_kfifo, + (unsigned char *) rx_data, j, + &state->rx_kfifo_lock); + if (k != j) + kror++; /* rx_kfifo over run */ + } + *handled = true; + } + + events = 0; + v = 0; + if (kror) { + events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver software FIFO overrun\n"); + } + if (roe && ror) { + /* + * The RX FIFO Enable (CNTRL_RFE) must be toggled to clear + * the Rx FIFO Over Run status (STATS_ROR) + */ + v |= CNTRL_RFE; + events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN; + v4l2_err(sd, "IR receiver hardware FIFO overrun\n"); + } + if (rte && rto) { + /* + * The IR Receiver Enable (CNTRL_RXE) must be toggled to clear + * the Rx Pulse Width Timer Time Out (STATS_RTO) + */ + v |= CNTRL_RXE; + events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED; + } + if (v) { + /* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */ + cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v); + cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl); + *handled = true; + } + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2) + events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ; + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); + + if (events) + v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events); + return 0; +} + +/* Receiver */ +static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx23888_ir_state *state = to_state(sd); + bool invert = (bool) atomic_read(&state->rx_invert); + u16 divider = (u16) atomic_read(&state->rxclk_divider); + + unsigned int i, n; + union cx23888_ir_fifo_rec *p; + unsigned u, v, w; + + n = count / sizeof(union cx23888_ir_fifo_rec) + * sizeof(union cx23888_ir_fifo_rec); + if (n == 0) { + *num = 0; + return 0; + } + + n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock); + + n /= sizeof(union cx23888_ir_fifo_rec); + *num = n * sizeof(union cx23888_ir_fifo_rec); + + for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) { + + if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) { + /* Assume RTO was because of no IR light input */ + u = 0; + w = 1; + } else { + u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0; + if (invert) + u = u ? 0 : 1; + w = 0; + } + + v = (unsigned) pulse_width_count_to_ns( + (u16) (p->hw_fifo_data & FIFO_RXTX), divider); + if (v > IR_MAX_DURATION) + v = IR_MAX_DURATION; + + init_ir_raw_event(&p->ir_core_data); + p->ir_core_data.pulse = u; + p->ir_core_data.duration = v; + p->ir_core_data.timeout = w; + + v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s %s\n", + v, u ? "mark" : "space", w ? "(timed out)" : ""); + if (w) + v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n"); + } + return 0; +} + +static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + mutex_lock(&state->rx_params_lock); + memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&state->rx_params_lock); + return 0; +} + +static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + + mutex_lock(&state->rx_params_lock); + + /* Disable or slow down all IR Rx circuits and counters */ + irqenable_rx(dev, 0); + control_rx_enable(dev, false); + control_rx_demodulation_enable(dev, false); + control_rx_s_edge_detection(dev, CNTRL_EDG_NONE); + filter_rx_s_min_width(dev, 0); + cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD); + + state->rx_params.shutdown = true; + + mutex_unlock(&state->rx_params_lock); + return 0; +} + +static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + struct v4l2_subdev_ir_parameters *o = &state->rx_params; + u16 rxclk_divider; + + if (p->shutdown) + return cx23888_ir_rx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + mutex_lock(&state->rx_params_lock); + + o->shutdown = p->shutdown; + + o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + + o->bytes_per_data_element = p->bytes_per_data_element + = sizeof(union cx23888_ir_fifo_rec); + + /* Before we tweak the hardware, we have to disable the receiver */ + irqenable_rx(dev, 0); + control_rx_enable(dev, false); + + control_rx_demodulation_enable(dev, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq, + &rxclk_divider); + + o->carrier_freq = p->carrier_freq; + + o->duty_cycle = p->duty_cycle = 50; + + control_rx_s_carrier_window(dev, p->carrier_freq, + &p->carrier_range_lower, + &p->carrier_range_upper); + o->carrier_range_lower = p->carrier_range_lower; + o->carrier_range_upper = p->carrier_range_upper; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider); + } else { + p->max_pulse_width = + rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width, + &rxclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&state->rxclk_divider, rxclk_divider); + + p->noise_filter_min_width = + filter_rx_s_min_width(dev, p->noise_filter_min_width); + o->noise_filter_min_width = p->noise_filter_min_width; + + p->resolution = clock_divider_to_resolution(rxclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL); + + control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH); + + o->invert_level = p->invert_level; + atomic_set(&state->rx_invert, p->invert_level); + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + unsigned long flags; + + spin_lock_irqsave(&state->rx_kfifo_lock, flags); + kfifo_reset(&state->rx_kfifo); + /* reset tx_fifo too if there is one... */ + spin_unlock_irqrestore(&state->rx_kfifo_lock, flags); + if (p->interrupt_enable) + irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE); + control_rx_enable(dev, p->enable); + } + + mutex_unlock(&state->rx_params_lock); + return 0; +} + +/* Transmitter */ +static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + /* For now enable the Tx FIFO Service interrupt & pretend we did work */ + irqenable_tx(dev, IRQEN_TSE); + *num = count; + return 0; +} + +static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + mutex_lock(&state->tx_params_lock); + memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters)); + mutex_unlock(&state->tx_params_lock); + return 0; +} + +static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + + mutex_lock(&state->tx_params_lock); + + /* Disable or slow down all IR Tx circuits and counters */ + irqenable_tx(dev, 0); + control_tx_enable(dev, false); + control_tx_modulation_enable(dev, false); + cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD); + + state->tx_params.shutdown = true; + + mutex_unlock(&state->tx_params_lock); + return 0; +} + +static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *p) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + struct v4l2_subdev_ir_parameters *o = &state->tx_params; + u16 txclk_divider; + + if (p->shutdown) + return cx23888_ir_tx_shutdown(sd); + + if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH) + return -ENOSYS; + + mutex_lock(&state->tx_params_lock); + + o->shutdown = p->shutdown; + + o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH; + + o->bytes_per_data_element = p->bytes_per_data_element + = sizeof(union cx23888_ir_fifo_rec); + + /* Before we tweak the hardware, we have to disable the transmitter */ + irqenable_tx(dev, 0); + control_tx_enable(dev, false); + + control_tx_modulation_enable(dev, p->modulation); + o->modulation = p->modulation; + + if (p->modulation) { + p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq, + &txclk_divider); + o->carrier_freq = p->carrier_freq; + + p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle); + o->duty_cycle = p->duty_cycle; + + p->max_pulse_width = + (u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider); + } else { + p->max_pulse_width = + txclk_tx_s_max_pulse_width(dev, p->max_pulse_width, + &txclk_divider); + } + o->max_pulse_width = p->max_pulse_width; + atomic_set(&state->txclk_divider, txclk_divider); + + p->resolution = clock_divider_to_resolution(txclk_divider); + o->resolution = p->resolution; + + /* FIXME - make this dependent on resolution for better performance */ + control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY); + + control_tx_polarity_invert(dev, p->invert_carrier_sense); + o->invert_carrier_sense = p->invert_carrier_sense; + + control_tx_level_invert(dev, p->invert_level); + o->invert_level = p->invert_level; + + o->interrupt_enable = p->interrupt_enable; + o->enable = p->enable; + if (p->enable) { + if (p->interrupt_enable) + irqenable_tx(dev, IRQEN_TSE); + control_tx_enable(dev, p->enable); + } + + mutex_unlock(&state->tx_params_lock); + return 0; +} + + +/* + * V4L2 Subdevice Core Ops + */ +static int cx23888_ir_log_status(struct v4l2_subdev *sd) +{ + struct cx23888_ir_state *state = to_state(sd); + struct cx23885_dev *dev = state->dev; + char *s; + int i, j; + + u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG); + u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD; + u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD; + u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC; + u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG); + u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG); + u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF; + + v4l2_info(sd, "IR Receiver:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_RXE ? "yes" : "no"); + v4l2_info(sd, "\tDemodulation from a carrier: %s\n", + cntrl & CNTRL_DMD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_RFE ? "enabled" : "disabled"); + switch (cntrl & CNTRL_EDG) { + case CNTRL_EDG_NONE: + s = "disabled"; + break; + case CNTRL_EDG_FALL: + s = "falling edge"; + break; + case CNTRL_EDG_RISE: + s = "rising edge"; + break; + case CNTRL_EDG_BOTH: + s = "rising & falling edges"; + break; + default: + s = "??? edge"; + break; + } + v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s); + v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n", + cntrl & CNTRL_R ? "not loaded" : "overflow marker"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_RIC ? "not empty" : "half full or greater"); + v4l2_info(sd, "\tLoopback mode: %s\n", + cntrl & CNTRL_LBM ? "loopback active" : "normal receive"); + if (cntrl & CNTRL_DMD) { + v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(rxclk)); + switch (cntrl & CNTRL_WIN) { + case CNTRL_WIN_3_3: + i = 3; + j = 3; + break; + case CNTRL_WIN_4_3: + i = 4; + j = 3; + break; + case CNTRL_WIN_3_4: + i = 3; + j = 4; + break; + case CNTRL_WIN_4_4: + i = 4; + j = 4; + break; + default: + i = 0; + j = 0; + break; + } + v4l2_info(sd, "\tNext carrier edge window: 16 clocks " + "-%1d/+%1d, %u to %u Hz\n", i, j, + clock_divider_to_freq(rxclk, 16 + j), + clock_divider_to_freq(rxclk, 16 - i)); + } + v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, rxclk), + pulse_width_count_to_ns(FIFO_RXTX, rxclk)); + v4l2_info(sd, "\tLow pass filter: %s\n", + filtr ? "enabled" : "disabled"); + if (filtr) + v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, " + "%u ns\n", + lpf_count_to_us(filtr), + lpf_count_to_ns(filtr)); + v4l2_info(sd, "\tPulse width timer timed-out: %s\n", + stats & STATS_RTO ? "yes" : "no"); + v4l2_info(sd, "\tPulse width timer time-out intr: %s\n", + irqen & IRQEN_RTE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO overrun: %s\n", + stats & STATS_ROR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO overrun interrupt: %s\n", + irqen & IRQEN_ROE ? "enabled" : "disabled"); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_RBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_RSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_RSE ? "enabled" : "disabled"); + + v4l2_info(sd, "IR Transmitter:\n"); + v4l2_info(sd, "\tEnabled: %s\n", + cntrl & CNTRL_TXE ? "yes" : "no"); + v4l2_info(sd, "\tModulation onto a carrier: %s\n", + cntrl & CNTRL_MOD ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO: %s\n", + cntrl & CNTRL_TFE ? "enabled" : "disabled"); + v4l2_info(sd, "\tFIFO interrupt watermark: %s\n", + cntrl & CNTRL_TIC ? "not empty" : "half full or less"); + v4l2_info(sd, "\tOutput pin level inversion %s\n", + cntrl & CNTRL_IVO ? "yes" : "no"); + v4l2_info(sd, "\tCarrier polarity: %s\n", + cntrl & CNTRL_CPL ? "space:burst mark:noburst" + : "space:noburst mark:burst"); + if (cntrl & CNTRL_MOD) { + v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n", + clock_divider_to_carrier_freq(txclk)); + v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n", + cduty + 1); + } + v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n", + pulse_width_count_to_us(FIFO_RXTX, txclk), + pulse_width_count_to_ns(FIFO_RXTX, txclk)); + v4l2_info(sd, "\tBusy: %s\n", + stats & STATS_TBY ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service requested: %s\n", + stats & STATS_TSR ? "yes" : "no"); + v4l2_info(sd, "\tFIFO service request interrupt: %s\n", + irqen & IRQEN_TSE ? "enabled" : "disabled"); + + return 0; +} + +static inline int cx23888_ir_dbg_match(const struct v4l2_dbg_match *match) +{ + return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 2; +} + +static int cx23888_ir_g_chip_ident(struct v4l2_subdev *sd, + struct v4l2_dbg_chip_ident *chip) +{ + struct cx23888_ir_state *state = to_state(sd); + + if (cx23888_ir_dbg_match(&chip->match)) { + chip->ident = state->id; + chip->revision = state->rev; + } + return 0; +} + +#ifdef CONFIG_VIDEO_ADV_DEBUG +static int cx23888_ir_g_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct cx23888_ir_state *state = to_state(sd); + u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg; + + if (!cx23888_ir_dbg_match(®->match)) + return -EINVAL; + if ((addr & 0x3) != 0) + return -EINVAL; + if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + reg->size = 4; + reg->val = cx23888_ir_read4(state->dev, addr); + return 0; +} + +static int cx23888_ir_s_register(struct v4l2_subdev *sd, + struct v4l2_dbg_register *reg) +{ + struct cx23888_ir_state *state = to_state(sd); + u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg; + + if (!cx23888_ir_dbg_match(®->match)) + return -EINVAL; + if ((addr & 0x3) != 0) + return -EINVAL; + if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG) + return -EINVAL; + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + cx23888_ir_write4(state->dev, addr, reg->val); + return 0; +} +#endif + +static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = { + .g_chip_ident = cx23888_ir_g_chip_ident, + .log_status = cx23888_ir_log_status, +#ifdef CONFIG_VIDEO_ADV_DEBUG + .g_register = cx23888_ir_g_register, + .s_register = cx23888_ir_s_register, +#endif + .interrupt_service_routine = cx23888_ir_irq_handler, +}; + +static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = { + .rx_read = cx23888_ir_rx_read, + .rx_g_parameters = cx23888_ir_rx_g_parameters, + .rx_s_parameters = cx23888_ir_rx_s_parameters, + + .tx_write = cx23888_ir_tx_write, + .tx_g_parameters = cx23888_ir_tx_g_parameters, + .tx_s_parameters = cx23888_ir_tx_s_parameters, +}; + +static const struct v4l2_subdev_ops cx23888_ir_controller_ops = { + .core = &cx23888_ir_core_ops, + .ir = &cx23888_ir_ir_ops, +}; + +static const struct v4l2_subdev_ir_parameters default_rx_params = { + .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */ + + /* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */ + /* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */ + .noise_filter_min_width = 333333, /* ns */ + .carrier_range_lower = 35000, + .carrier_range_upper = 37000, + .invert_level = false, +}; + +static const struct v4l2_subdev_ir_parameters default_tx_params = { + .bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec), + .mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, + + .enable = false, + .interrupt_enable = false, + .shutdown = true, + + .modulation = true, + .carrier_freq = 36000, /* 36 kHz - RC-5 carrier */ + .duty_cycle = 25, /* 25 % - RC-5 carrier */ + .invert_level = false, + .invert_carrier_sense = false, +}; + +int cx23888_ir_probe(struct cx23885_dev *dev) +{ + struct cx23888_ir_state *state; + struct v4l2_subdev *sd; + struct v4l2_subdev_ir_parameters default_params; + int ret; + + state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL); + if (state == NULL) + return -ENOMEM; + + spin_lock_init(&state->rx_kfifo_lock); + if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL)) + return -ENOMEM; + + state->dev = dev; + state->id = V4L2_IDENT_CX23888_IR; + state->rev = 0; + sd = &state->sd; + + v4l2_subdev_init(sd, &cx23888_ir_controller_ops); + v4l2_set_subdevdata(sd, state); + /* FIXME - fix the formatting of dev->v4l2_dev.name and use it */ + snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name); + sd->grp_id = CX23885_HW_888_IR; + + ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd); + if (ret == 0) { + /* + * Ensure no interrupts arrive from '888 specific conditions, + * since we ignore them in this driver to have commonality with + * similar IR controller cores. + */ + cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0); + + mutex_init(&state->rx_params_lock); + memcpy(&default_params, &default_rx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params); + + mutex_init(&state->tx_params_lock); + memcpy(&default_params, &default_tx_params, + sizeof(struct v4l2_subdev_ir_parameters)); + v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params); + } else { + kfifo_free(&state->rx_kfifo); + } + return ret; +} + +int cx23888_ir_remove(struct cx23885_dev *dev) +{ + struct v4l2_subdev *sd; + struct cx23888_ir_state *state; + + sd = cx23885_find_hw(dev, CX23885_HW_888_IR); + if (sd == NULL) + return -ENODEV; + + cx23888_ir_rx_shutdown(sd); + cx23888_ir_tx_shutdown(sd); + + state = to_state(sd); + v4l2_device_unregister_subdev(sd); + kfifo_free(&state->rx_kfifo); + kfree(state); + /* Nothing more to free() as state held the actual v4l2_subdev object */ + return 0; +} diff --git a/drivers/media/pci/cx23885/cx23888-ir.h b/drivers/media/pci/cx23885/cx23888-ir.h new file mode 100644 index 00000000000..d2de41caaf1 --- /dev/null +++ b/drivers/media/pci/cx23885/cx23888-ir.h @@ -0,0 +1,28 @@ +/* + * Driver for the Conexant CX23885/7/8 PCIe bridge + * + * CX23888 Integrated Consumer Infrared Controller + * + * Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ + +#ifndef _CX23888_IR_H_ +#define _CX23888_IR_H_ +int cx23888_ir_probe(struct cx23885_dev *dev); +int cx23888_ir_remove(struct cx23885_dev *dev); +#endif diff --git a/drivers/media/pci/cx23885/netup-eeprom.c b/drivers/media/pci/cx23885/netup-eeprom.c new file mode 100644 index 00000000000..98a48f50068 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-eeprom.c @@ -0,0 +1,107 @@ + +/* + * netup-eeprom.c + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +# +#include "cx23885.h" +#include "netup-eeprom.h" + +#define EEPROM_I2C_ADDR 0x50 + +int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr) +{ + int ret; + unsigned char buf[2]; + + /* Read from EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &buf[0], + .len = 1 + }, { + .addr = EEPROM_I2C_ADDR, + .flags = I2C_M_RD, + .buf = &buf[1], + .len = 1 + } + + }; + + buf[0] = addr; + buf[1] = 0x0; + + ret = i2c_transfer(i2c_adap, msg, 2); + + if (ret != 2) { + printk(KERN_ERR "eeprom i2c read error, status=%d\n", ret); + return -1; + } + + return buf[1]; +}; + +int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data) +{ + int ret; + unsigned char bufw[2]; + + /* Write into EEPROM */ + struct i2c_msg msg[] = { + { + .addr = EEPROM_I2C_ADDR, + .flags = 0, + .buf = &bufw[0], + .len = 2 + } + }; + + bufw[0] = addr; + bufw[1] = data; + + ret = i2c_transfer(i2c_adap, msg, 1); + + if (ret != 1) { + printk(KERN_ERR "eeprom i2c write error, status=%d\n", ret); + return -1; + } + + mdelay(10); /* prophylactic delay, datasheet write cycle time = 5 ms */ + return 0; +}; + +void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo) +{ + int i, j; + + cinfo->rev = netup_eeprom_read(i2c_adap, 63); + + for (i = 64, j = 0; i < 70; i++, j++) + cinfo->port[0].mac[j] = netup_eeprom_read(i2c_adap, i); + + for (i = 70, j = 0; i < 76; i++, j++) + cinfo->port[1].mac[j] = netup_eeprom_read(i2c_adap, i); +}; diff --git a/drivers/media/pci/cx23885/netup-eeprom.h b/drivers/media/pci/cx23885/netup-eeprom.h new file mode 100644 index 00000000000..13926e18feb --- /dev/null +++ b/drivers/media/pci/cx23885/netup-eeprom.h @@ -0,0 +1,42 @@ +/* + * netup-eeprom.h + * + * 24LC02 EEPROM driver in conjunction with NetUP Dual DVB-S2 CI card + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef NETUP_EEPROM_H +#define NETUP_EEPROM_H + +struct netup_port_info { + u8 mac[6];/* card MAC address */ +}; + +struct netup_card_info { + struct netup_port_info port[2];/* ports - 1,2 */ + u8 rev;/* card revision */ +}; + +extern int netup_eeprom_read(struct i2c_adapter *i2c_adap, u8 addr); +extern int netup_eeprom_write(struct i2c_adapter *i2c_adap, u8 addr, u8 data); +extern void netup_get_card_info(struct i2c_adapter *i2c_adap, + struct netup_card_info *cinfo); + +#endif diff --git a/drivers/media/pci/cx23885/netup-init.c b/drivers/media/pci/cx23885/netup-init.c new file mode 100644 index 00000000000..f4893e69cd8 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-init.c @@ -0,0 +1,125 @@ +/* + * netup-init.c + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "cx23885.h" + +static void i2c_av_write(struct i2c_adapter *i2c, u16 reg, u8 val) +{ + int ret; + u8 buf[3]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 3 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static void i2c_av_write4(struct i2c_adapter *i2c, u16 reg, u32 val) +{ + int ret; + u8 buf[6]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 6 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + buf[2] = val & 0xff; + buf[3] = (val >> 8) & 0xff; + buf[4] = (val >> 16) & 0xff; + buf[5] = val >> 24; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); +} + +static u8 i2c_av_read(struct i2c_adapter *i2c, u16 reg) +{ + int ret; + u8 buf[2]; + struct i2c_msg msg = { + .addr = 0x88 >> 1, + .flags = 0, + .buf = buf, + .len = 2 + }; + + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c write error!\n", __func__); + + msg.flags = I2C_M_RD; + msg.len = 1; + + ret = i2c_transfer(i2c, &msg, 1); + + if (ret != 1) + printk(KERN_ERR "%s: i2c read error!\n", __func__); + + return buf[0]; +} + +static void i2c_av_and_or(struct i2c_adapter *i2c, u16 reg, unsigned and_mask, + u8 or_value) +{ + i2c_av_write(i2c, reg, (i2c_av_read(i2c, reg) & and_mask) | or_value); +} +/* set 27MHz on AUX_CLK */ +void netup_initialize(struct cx23885_dev *dev) +{ + struct cx23885_i2c *i2c_bus = &dev->i2c_bus[2]; + struct i2c_adapter *i2c = &i2c_bus->i2c_adap; + + /* Stop microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x00); + + /* Aux PLL frac for 27 MHz */ + i2c_av_write4(i2c, 0x114, 0xea0eb3); + + /* Aux PLL int for 27 MHz */ + i2c_av_write4(i2c, 0x110, 0x090319); + + /* start microcontroller */ + i2c_av_and_or(i2c, 0x803, ~0x10, 0x10); +} diff --git a/drivers/media/pci/cx23885/netup-init.h b/drivers/media/pci/cx23885/netup-init.h new file mode 100644 index 00000000000..d26ae4b1590 --- /dev/null +++ b/drivers/media/pci/cx23885/netup-init.h @@ -0,0 +1,25 @@ +/* + * netup-init.h + * + * NetUP Dual DVB-S2 CI driver + * + * Copyright (C) 2009 NetUP Inc. + * Copyright (C) 2009 Igor M. Liplianin <liplianin@netup.ru> + * Copyright (C) 2009 Abylay Ospan <aospan@netup.ru> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +extern void netup_initialize(struct cx23885_dev *dev); |